[linux-dvb] HVR2250 / HVR2200 / SAA7164 status

[linux-dvb] HVR2250 / HVR2200 / SAA7164 status

[Davin McCall]

Steven Toth wrote:

> Feel free to ping me through this mailing list every few weeks.
> 

So, ping...

The HVR2200 would be perfect for my mythtv box - if it had a working
driver.

If possible I'd like to know:
- current status of DVB
- Analogue?
- remote control?
- Is there a repository somewhere?
- Can I help? I'm perfectly fluent in C and have done a little hardware
stuff before.

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] HVR2250 / HVR2200 / SAA7164 status

[Steven Toth]

Davin McCall wrote:
> Steven Toth wrote:
> 
>> Feel free to ping me through this mailing list every few weeks.
>>
> 
> So, ping...

No progress, sorry.

- Steve

Re: [linux-dvb] HVR2250 / HVR2200 / SAA7164 status

[David Gundersen]

[-- Attachment #1.1: Type: text/plain, Size: 1609 bytes --]

Steve,

Do you know if Hauppauge are willing/able to dish out the
hardware/programming specifications for these cards?

I understand that you're busy with other things, but it seems that there are
a lot of people waiting on support for these cards, and by the sound of it
there are at least a few who have enough experience and/or time to have a
good run at getting something going..

I don't want to sound ungrateful, as I (and many others) appreciate the
amount of time and effort that you put into these things but I also
appreciate that there's only so much time in the day that you can spend on
driver development, and I think that you should at least acknowledge people
who are willing and able to help (eg. Davin), rather than just coming back
with 'no progress'...

If there are problems organising things like NDA's etc or if Hauppauge don't
want to share information then that's fine - I guess we'll just have to
wait...  but if there is any way of letting someone else have a go, then all
I would ask is that you please consider letting them take some of the burden
off your shoulders.

Regards,
Dave.


On Thu, Feb 5, 2009 at 3:55 AM, Steven Toth <stoth@linuxtv.org> wrote:

> Davin McCall wrote:
> > Steven Toth wrote:
> >
> >> Feel free to ping me through this mailing list every few weeks.
> >>
> >
> > So, ping...
>
> No progress, sorry.
>
> - Steve
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>

[-- Attachment #1.2: Type: text/html, Size: 2297 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

re: [linux-dvb] HVR2250 / HVR2200 / SAA7164 status

[David Gundersen]

Steve,

Do you know if Hauppauge are willing/able to dish out the
hardware/programming specifications for these cards?

I understand that you're busy with other things, but it seems that
there are a lot of people waiting on support for these cards, and by
the sound of it there are at least a few who have enough experience
and/or time to have a good run at getting something going..

I don't want to sound ungrateful, as I (and many others) appreciate
the amount of time and effort that you put into these things but I
also appreciate that there's only so much time in the day that you can
spend on driver development, and I think that you should at least
acknowledge people who are willing and able to help (eg. Davin),
rather than just coming back with 'no progress'...

If there are problems organising things like NDA's etc or if Hauppauge
don't want to share information then that's fine - I guess we'll just
have to wait...  but if there is any way of letting someone else have
a go, then all I would ask is that you please consider letting them
take some of the burden off your shoulders.

Regards,
Dave.


On Thu, Feb 5, 2009 at 3:55 AM, Steven Toth <stoth@linuxtv.org> wrote:
>
> Davin McCall wrote:
> > Steven Toth wrote:
> >
> >> Feel free to ping me through this mailing list every few weeks.
> >>
> >
> > So, ping...
>
> No progress, sorry.
>
> - Steve

Re: [linux-dvb] HVR2250 / HVR2200 / SAA7164 status

[Steven Toth]

David Gundersen wrote:
> 
> Steve,
> 
> Do you know if Hauppauge are willing/able to dish out the 
> hardware/programming specifications for these cards? 

David, you're not the first to ask and I doubt you'll be the last.

No, sorry, this isn't something Hauppauge can dish out. When I have time I'll 
get back to it. Until then the status is the same 'no progress'. It's not an 
itch that I need to scratch right now.

What the status changes these lists will be the first to know.

- Steve

Re: [linux-dvb] HVR2250 / HVR2200 / SAA7164 status

[Patrick Allemann]

I would also be more than interested in a working driver for the HRV2200
and would gladly contribute to a revival of this project. As I my C skills
are not worth mentioning all I can offer is some testing and reporting.
(fetching coffe and beer while you guys are busy)

Date: Wed, 4 Feb 2009 18:34:47 +1100
From: Davin McCall <davmac@davmac.org>
Subject: [linux-dvb] HVR2250 / HVR2200 / SAA7164 status
To: linux-dvb@linuxtv.org
Message-ID: <20090204183447.26c0903b.davmac@davmac.org>
Content-Type: text/plain; charset=US-ASCII

Steven Toth wrote:

> Feel free to ping me through this mailing list every few weeks.
>

So, ping...

The HVR2200 would be perfect for my mythtv box - if it had a working
driver.

If possible I'd like to know:
- current status of DVB
- Analogue?
- remote control?
- Is there a repository somewhere?
- Can I help? I'm perfectly fluent in C and have done a little hardware
stuff before.






_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] HVR2250 / HVR2200 / SAA7164 status

[Joe Julian]

Steven Toth wrote:

    As you know, I'm writing a driver for the SAA7164 chipset, for the
    HVR2200 DVB-T and HVR2250 ATSC/QAM products.

    People have been asking for status, here's where I am.

    Do I have anything to share with people yet? Not yet.

      

    The basic driver framework is done. Firmware is loading, I can
    talking to the silicon through the proprietary PCIe ring buffer
    interface. I2C is working, eeprom and tuner/demod access is done.
    The HVR2250 is responding to azap commands, the tuners and demods
    are locking, snr looks pretty good... it's going to be a popular
    board for people. The HVR2200 (DVB-T Version) should also worked
    with tzap, it's untested and I can't comment on SNR at this stage. I
    need to add the DMA/buffering code, this is the missing pieces
    before a first public release. When I have anything to share I'll
    put up a tree and post a 'testers required' message here. 


We're a couple episodes into this fall television season and I'm missing 
my shows. ;)

Having another month down, I wanted to send a friendly nudge your 
direction, Steve, to see how this is progressing.

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] HVR2250 / HVR2200 / SAA7164 status

[Steven Toth]

Joe Julian wrote:
> Steven Toth wrote:
> 
>     As you know, I'm writing a driver for the SAA7164 chipset, for the
>     HVR2200 DVB-T and HVR2250 ATSC/QAM products.
> 
>     People have been asking for status, here's where I am.
> 
>     Do I have anything to share with people yet? Not yet.
> 
>       
> 
>     The basic driver framework is done. Firmware is loading, I can
>     talking to the silicon through the proprietary PCIe ring buffer
>     interface. I2C is working, eeprom and tuner/demod access is done.
>     The HVR2250 is responding to azap commands, the tuners and demods
>     are locking, snr looks pretty good... it's going to be a popular
>     board for people. The HVR2200 (DVB-T Version) should also worked
>     with tzap, it's untested and I can't comment on SNR at this stage. I
>     need to add the DMA/buffering code, this is the missing pieces
>     before a first public release. When I have anything to share I'll
>     put up a tree and post a 'testers required' message here. 
> 
> 
> We're a couple episodes into this fall television season and I'm missing 
> my shows. ;)
> 
> Having another month down, I wanted to send a friendly nudge your 
> direction, Steve, to see how this is progressing.

:)

I hear you!

Nothing to report lately. The S2API and the Plumbers conf took a lot of 
my time, I'm only now getting back into a regular linux schedule.

Feel free to ping me through this mailing list every few weeks.

- Steve

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] HVR2250 / HVR2200 / SAA7164 status

[Markus Ingalsuo]

Steven Toth wrote:
> Joe Julian wrote:
>   
>> Steven Toth wrote:
>>
>>     As you know, I'm writing a driver for the SAA7164 chipset, for the
>>     HVR2200 DVB-T and HVR2250 ATSC/QAM products.
>>
>>     People have been asking for status, here's where I am.
>>
>>     Do I have anything to share with people yet? Not yet.
>>
>>       
>>
>>     The basic driver framework is done. Firmware is loading, I can
>>     talking to the silicon through the proprietary PCIe ring buffer
>>     interface. I2C is working, eeprom and tuner/demod access is done.
>>     The HVR2250 is responding to azap commands, the tuners and demods
>>     are locking, snr looks pretty good... it's going to be a popular
>>     board for people. The HVR2200 (DVB-T Version) should also worked
>>     with tzap, it's untested and I can't comment on SNR at this stage. I
>>     need to add the DMA/buffering code, this is the missing pieces
>>     before a first public release. When I have anything to share I'll
>>     put up a tree and post a 'testers required' message here. 
>>
>>
>> We're a couple episodes into this fall television season and I'm missing 
>> my shows. ;)
>>
>> Having another month down, I wanted to send a friendly nudge your 
>> direction, Steve, to see how this is progressing.
>>     
>
> :)
>
> I hear you!
>
> Nothing to report lately. The S2API and the Plumbers conf took a lot of 
> my time, I'm only now getting back into a regular linux schedule.
>
> Feel free to ping me through this mailing list every few weeks.
>
> - Steve
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>   

Hi!

I'm going to go ahead and feel free to ask if you have made any progress 
with the HVR2200? :)


//Markus

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb