From: Lamarque Vieira Souza <lamarque@gmail.com>
To: Markus Rechberger <mrechberger@gmail.com>
Cc: video4linux-list@redhat.com
Subject: Re: Skype and libv4l
Date: Tue, 24 Mar 2009 16:05:06 -0300 [thread overview]
Message-ID: <200903241605.07230.lamarque@gmail.com> (raw)
In-Reply-To: <d9def9db0903241158h6324e805j68682c42098648cd@mail.gmail.com>
Em Tuesday 24 March 2009, Markus Rechberger escreveu:
> On Tue, Mar 24, 2009 at 7:42 PM, Lamarque Vieira Souza
>
> <lamarque@gmail.com> wrote:
> > It must be some problem in LD_PRELOAD, even setting
> > LIBV4L2_LOG_FILENAME the file is not created. I am running skype like
> > this:
> >
> > LD_PRELOAD=/usr/lib32/libv4l2.so /opt/skype/skype
> >
> > /opt/skype/skype is the binary executable. There is not error
> > message about LD_PRELOAD or libv4l. Skype returns:
> >
> > Skype V4L2: Could not find a suitable capture format
> > Skype V4L2: Could not find a suitable capture format
> > Starting the process...
> > Skype Xv: Xv ports available: 4
> > Skype XShm: XShm support enabled
> > Skype Xv: Using Xv port 131
> > Skype Xv: No suitable overlay format found
>
> this is a problem of your graphiccard or graphic driver, look for
> xorg.org tweaks.
Well, there are two problems above: the "Skype V4L2: Could not find a
suitable capture format" and the "Skype Xv: No suitable overlay format found".
I am trying to fix the first one for now, after that I am going to try to fix
the other. As I said before the webcam works with Kopete (64-bit) and with
mplayer (32-bit and 64-bit), so the Xv problem must be Skype specific, but I
cannot test this problem until I fix the first one.
> Markus
>
> > OBS: compat-ioctl32.ko is being used by the driver so it should
> > support 32- bit ioctl.
> >
> > Em Tuesday 24 March 2009, Lamarque Vieira Souza escreveu:
> >> Hi,
> >>
> >> Em Tuesday 24 March 2009, Hans de Goede escreveu:
> >> > On 03/23/2009 09:08 PM, Lamarque Vieira Souza wrote:
> >> > > Hi all,
> >> > >
> >> > > I am trying to make Skype work with my webcam (Creative PC-CAM
> >> > > 880, driver zr364xx). By what I have found Skype only supports YU12,
> >> > > YUYV and UYVY pixel formats, which libv4l supports as source formats
> >> > > only and not as destination formats.
> >> >
> >> > YU12 is the same as YUV420 (planar) which skype does support. I assure
> >> > you that skype works with libv4l for cams which have a native format
> >> > which skype does not understand.
> >>
> >> My fault here (+/-), I created a function to decode fourcc hex
> >> numbers to names and it returns V4L2_PIX_FMT_YU12 instead of
> >> V4L2_PIX_FMT_YUV420. I did not know they are synonyms. Anyway, it seems
> >> lib4l 0.5.9 (32-bit) is not working with Skype (32-bit) while lib4l
> >> 0.5.3 (64-bit) is working with Kopete (64-bit) patched to work with
> >> libv4l (no LD_PRELOAD). I will keep on trying to figure out why.
> >>
> >> > What is an other issue with skype is that it insists on asking
> >> > 320x240, so if the driver for your cam cannot deliver 320x240 and
> >> > libv4l fails to make 320x240 out of it in someway (see below) then
> >> > skype will fail.
> >> >
> >> > libv4l will crop 352x288 to 320x240 especially for skype, and it will
> >> > downscale 640x480 to 320x240 for the same reason.
> >>
> >> The driver delivers 320x240 as default.
> >
> > --
> > Lamarque V. Souza
> > http://www.geographicguide.com/brazil.htm
> > Linux User #57137 - http://counter.li.org/
> >
> > --
> > video4linux-list mailing list
> > Unsubscribe
> > mailto:video4linux-list-request@redhat.com?subject=unsubscribe
> > https://www.redhat.com/mailman/listinfo/video4linux-list
--
Lamarque V. Souza
http://www.geographicguide.com/brazil.htm
Linux User #57137 - http://counter.li.org/
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next prev parent reply other threads:[~2009-03-24 19:06 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-23 20:08 Skype and libv4l Lamarque Vieira Souza
2009-03-24 9:59 ` Hans de Goede
2009-03-24 16:11 ` Lamarque Vieira Souza
2009-03-24 18:42 ` Lamarque Vieira Souza
2009-03-24 18:58 ` Markus Rechberger
2009-03-24 18:59 ` Markus Rechberger
2009-03-24 19:05 ` Lamarque Vieira Souza [this message]
2009-03-24 20:51 ` Theodoros V. Kalamatianos
2009-03-24 21:10 ` Lamarque Vieira Souza
2009-03-24 22:09 ` Skype and libv4 Lamarque Vieira Souza
2009-03-24 22:29 ` Lamarque Vieira Souza
2009-03-25 9:03 ` Hans de Goede
2009-03-25 14:17 ` Lamarque Vieira Souza
[not found] ` <49CB4D4E.6030901@redhat.com>
2009-03-26 13:36 ` Lamarque Vieira Souza
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200903241605.07230.lamarque@gmail.com \
--to=lamarque@gmail.com \
--cc=mrechberger@gmail.com \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox