From: "Miroslav Šustek" <sustmidown@centrum.cz>
To: <linux-media@vger.kernel.org>
Subject: mchehab@infradead.org
Date: Fri, 29 May 2009 16:36:13 +0200 [thread overview]
Message-ID: <200905291636.330@centrum.cz> (raw)
In-Reply-To: <200905291635.22786@centrum.cz>
[-- Attachment #1: Type: text/plain, Size: 493 bytes --]
Hello,
this patch adds support for Leadtek WinFast DTV-1800H hybrid card.
It enables analog/digital tv, radio and remote control trough GPIO.
Input GPIO values are extracted from INF file which is included in winxp driver.
Analog audio works both through cx88-alsa and through internal cable from tv-card to sound card.
Tested by me and the people listed in patch (works well).
- Miroslav Šustek
(Sorry for TRIPLE!-post, but I am asshole and haven't appended the patch file last time. )
[-- Attachment #2: leadtek_winfast_dtv1800h.patch --]
[-- Type: application/octet-stream, Size: 5847 bytes --]
Adds support for Leadtek WinFast DTV-1800H
From: Miroslav Sustek <sustmidown@centrum.cz>
Enables analog/digital tv, radio and remote control (gpio).
Signed-off-by: Miroslav Sustek <sustmidown@centrum.cz>
Tested-by: Marcin Wojcikowski <emtees.mts@gmail.com>
Tested-by: Karel Juhanak <karel.juhanak@warnet.cz>
Tested-by: Andrew Goff <goffa72@gmail.com>
Tested-by: Jan Novak <novak-j@seznam.cz>
diff -r 65ec132f20df linux/Documentation/video4linux/CARDLIST.cx88
--- a/linux/Documentation/video4linux/CARDLIST.cx88 Wed May 27 15:53:00 2009 -0300
+++ b/linux/Documentation/video4linux/CARDLIST.cx88 Fri May 29 16:11:14 2009 +0200
@@ -79,3 +79,4 @@
78 -> Prof 6200 DVB-S [b022:3022]
79 -> Terratec Cinergy HT PCI MKII [153b:1177]
80 -> Hauppauge WinTV-IR Only [0070:9290]
+ 81 -> Leadtek WinFast DTV1800 Hybrid [107d:6654]
diff -r 65ec132f20df linux/drivers/media/video/cx88/cx88-cards.c
--- a/linux/drivers/media/video/cx88/cx88-cards.c Wed May 27 15:53:00 2009 -0300
+++ b/linux/drivers/media/video/cx88/cx88-cards.c Fri May 29 16:11:14 2009 +0200
@@ -2009,6 +2009,47 @@
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
+ [CX88_BOARD_WINFAST_DTV1800H] = {
+ .name = "Leadtek WinFast DTV1800 Hybrid",
+ .tuner_type = TUNER_XC2028,
+ .radio_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .radio_addr = 0x61,
+ /*
+ * GPIO setting
+ *
+ * 2: mute (0=off,1=on)
+ * 12: tuner reset pin
+ * 13: audio source (0=tuner audio,1=line in)
+ * 14: FM (0=on,1=off ???)
+ */
+ .input = {{
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x0400, /* pin 2 = 0 */
+ .gpio1 = 0x6040, /* pin 13 = 0, pin 14 = 1 */
+ .gpio2 = 0x0000,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x0400, /* pin 2 = 0 */
+ .gpio1 = 0x6060, /* pin 13 = 1, pin 14 = 1 */
+ .gpio2 = 0x0000,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x0400, /* pin 2 = 0 */
+ .gpio1 = 0x6060, /* pin 13 = 1, pin 14 = 1 */
+ .gpio2 = 0x0000,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x0400, /* pin 2 = 0 */
+ .gpio1 = 0x6000, /* pin 13 = 0, pin 14 = 0 */
+ .gpio2 = 0x0000,
+ },
+ .mpeg = CX88_MPEG_DVB,
+ },
};
/* ------------------------------------------------------------------ */
@@ -2426,6 +2467,10 @@
.subvendor = 0x0070,
.subdevice = 0x9290,
.card = CX88_BOARD_HAUPPAUGE_IRONLY,
+ }, {
+ .subvendor = 0x107d,
+ .subdevice = 0x6654,
+ .card = CX88_BOARD_WINFAST_DTV1800H,
},
};
@@ -2624,6 +2669,23 @@
return -EINVAL;
}
+static int cx88_xc3028_winfast1800h_callback(struct cx88_core *core,
+ int command, int arg)
+{
+ switch (command) {
+ case XC2028_TUNER_RESET:
+ /* GPIO 12 (xc3028 tuner reset) */
+ cx_set(MO_GP1_IO, 0x1010);
+ mdelay(50);
+ cx_clear(MO_GP1_IO, 0x10);
+ mdelay(50);
+ cx_set(MO_GP1_IO, 0x10);
+ mdelay(50);
+ return 0;
+ }
+ return -EINVAL;
+}
+
/* ------------------------------------------------------------------- */
/* some Divco specific stuff */
static int cx88_pv_8000gt_callback(struct cx88_core *core,
@@ -2696,6 +2758,8 @@
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
return cx88_dvico_xc2028_callback(core, command, arg);
+ case CX88_BOARD_WINFAST_DTV1800H:
+ return cx88_xc3028_winfast1800h_callback(core, command, arg);
}
switch (command) {
@@ -2882,6 +2946,16 @@
cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */
udelay(1000);
break;
+
+ case CX88_BOARD_WINFAST_DTV1800H:
+ /* GPIO 12 (xc3028 tuner reset) */
+ cx_set(MO_GP1_IO, 0x1010);
+ mdelay(50);
+ cx_clear(MO_GP1_IO, 0x10);
+ mdelay(50);
+ cx_set(MO_GP1_IO, 0x10);
+ mdelay(50);
+ break;
}
}
@@ -2902,6 +2976,7 @@
core->i2c_algo.udelay = 16;
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
+ case CX88_BOARD_WINFAST_DTV1800H:
ctl->demod = XC3028_FE_ZARLINK456;
break;
case CX88_BOARD_KWORLD_ATSC_120:
diff -r 65ec132f20df linux/drivers/media/video/cx88/cx88-dvb.c
--- a/linux/drivers/media/video/cx88/cx88-dvb.c Wed May 27 15:53:00 2009 -0300
+++ b/linux/drivers/media/video/cx88/cx88-dvb.c Fri May 29 16:11:14 2009 +0200
@@ -1021,6 +1021,7 @@
}
break;
case CX88_BOARD_PINNACLE_HYBRID_PCTV:
+ case CX88_BOARD_WINFAST_DTV1800H:
fe0->dvb.frontend = dvb_attach(zl10353_attach,
&cx88_pinnacle_hybrid_pctv,
&core->i2c_adap);
diff -r 65ec132f20df linux/drivers/media/video/cx88/cx88-input.c
--- a/linux/drivers/media/video/cx88/cx88-input.c Wed May 27 15:53:00 2009 -0300
+++ b/linux/drivers/media/video/cx88/cx88-input.c Fri May 29 16:11:14 2009 +0200
@@ -92,6 +92,7 @@
gpio=(gpio & 0x7fd) + (auxgpio & 0xef);
break;
case CX88_BOARD_WINFAST_DTV1000:
+ case CX88_BOARD_WINFAST_DTV1800H:
case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
gpio = (gpio & 0x6ff) | ((cx_read(MO_GP1_IO) << 8) & 0x900);
auxgpio = gpio;
@@ -237,6 +238,7 @@
ir->sampling = 1;
break;
case CX88_BOARD_WINFAST_DTV2000H:
+ case CX88_BOARD_WINFAST_DTV1800H:
ir_codes = ir_codes_winfast;
ir->gpio_addr = MO_GP0_IO;
ir->mask_keycode = 0x8f8;
diff -r 65ec132f20df linux/drivers/media/video/cx88/cx88.h
--- a/linux/drivers/media/video/cx88/cx88.h Wed May 27 15:53:00 2009 -0300
+++ b/linux/drivers/media/video/cx88/cx88.h Fri May 29 16:11:14 2009 +0200
@@ -237,6 +237,7 @@
#define CX88_BOARD_PROF_6200 78
#define CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII 79
#define CX88_BOARD_HAUPPAUGE_IRONLY 80
+#define CX88_BOARD_WINFAST_DTV1800H 81
enum cx88_itype {
CX88_VMUX_COMPOSITE1 = 1,
parent reply other threads:[~2009-05-29 14:36 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <200905291635.22786@centrum.cz>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200905291636.330@centrum.cz \
--to=sustmidown@centrum.cz \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox