From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from as-10.de ([212.112.241.2]:34775 "EHLO mail.as-10.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757430AbZFQQcM (ORCPT ); Wed, 17 Jun 2009 12:32:12 -0400 Received: from localhost (localhost.localdomain [127.0.0.1]) by mail.as-10.de (Postfix) with ESMTP id 50CE233A829 for ; Wed, 17 Jun 2009 18:21:59 +0200 (CEST) Received: from mail.as-10.de ([127.0.0.1]) by localhost (as-10.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id fo9etoXG64We for ; Wed, 17 Jun 2009 18:21:59 +0200 (CEST) Received: from halim.local (pD9E3FFF3.dip.t-dialin.net [217.227.255.243]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: web11p28) by mail.as-10.de (Postfix) with ESMTPSA id 1F50233A7E1 for ; Wed, 17 Jun 2009 18:21:59 +0200 (CEST) Date: Wed, 17 Jun 2009 18:24:00 +0200 From: Halim Sahin To: linux-media@vger.kernel.org Subject: bttv problem loading takes about several minutes Message-ID: <20090617162400.GA11690@halim.local> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: linux-media-owner@vger.kernel.org List-ID: Hi, In the past I could use this card by typing modprobe bttv card=34 tuner=24 gbuffers=16 Giving this command with current drivers has some problems: 1. it takes several minutes to load bttv module. 2. capturing doesn't work any more (dropped frames etc). Tested with current v4l-dvb from hg, ubuntu 9.04, debian lenny. I have a bt878 based card from leadtek. Here is my output after loading the driver: [ 3013.735459] bttv: driver version 0.9.17 loaded [ 3013.735470] bttv: using 32 buffers with 16k (4 pages) each for capture [ 3013.735542] bttv: Bt8xx card found (0). [ 3013.735562] bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 19, latency: 32, mmio : 0xf7800000 [ 3013.737762] bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insm od option] [ 3013.737825] bttv0: gpio: en=00000000, out=00000000 in=003ff502 [init] [ 3148.136017] bttv0: tuner type=24 [ 3148.136029] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 3154.536019] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 3160.936018] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 3167.351398] bttv0: registered device video0 [ 3167.351434] bttv0: registered device vbi0 [ 3167.351463] bttv0: registered device radio0 [ 3167.351485] bttv0: PLL: 28636363 => 35468950 . ok [ 3167.364182] input: bttv IR (card=34) as /class/input/input6 Please help! Regards Halim -- Halim Sahin E-Mail: halim.sahin (at) t-online.de