* Re: driver for 041e:4055 Creative Technology, Ltd Live! Cam Video IM
@ 2009-07-25 21:32 Denis Loginov
0 siblings, 0 replies; 6+ messages in thread
From: Denis Loginov @ 2009-07-25 21:32 UTC (permalink / raw)
To: amol.debian; +Cc: video4linux-list
Try adding this line:
{USB_DEVICE(0x041e, 0x4055), .driver_info = SENSOR_TAS5130C_VF0250},
after
{USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250},
if file /usr/src/linux/drivers/media/video/gspca/zc3xx.c
then choose in Device Drivers -> Multimedia Devices -> Video Capture Adapters
-> V4L USB Devices -> GSPCA based webcams -> (M) ZC3XX USB Camera Driver
and reinstall kernel modules.
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: driver for 041e:4055 Creative Technology, Ltd Live! Cam Video IM
@ 2009-07-26 13:04 Denis Loginov
2009-07-31 4:24 ` amol verule
0 siblings, 1 reply; 6+ messages in thread
From: Denis Loginov @ 2009-07-26 13:04 UTC (permalink / raw)
To: amol.debian; +Cc: video4linux-list
Actually, according to http://linux-uvc.berlios.de/ , you can just try 'USB
Video Class' Driver, i.e. Device Drivers -> Multimedia Devices -> Video
Capture Adapters -> V4L USB Devices -> (M) USB Video Class (UVC) & (y) UVC
input events device support
(CONFIG_USB_VIDEO_CLASS=m & USB_VIDEO_CLASS_INPUT_EVDEV=y).
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: driver for 041e:4055 Creative Technology, Ltd Live! Cam Video IM
2009-07-26 13:04 Denis Loginov
@ 2009-07-31 4:24 ` amol verule
2009-07-31 8:38 ` Jean-Francois Moine
2009-08-01 8:11 ` Jean-Francois Moine
0 siblings, 2 replies; 6+ messages in thread
From: amol verule @ 2009-07-31 4:24 UTC (permalink / raw)
To: Denis Loginov; +Cc: video4linux-list
thanks denis,
after following these steps it worked me to detect
device but not to read or get picture from device. it is giving error as
usb 5-5: new high speed USB device using ehci_hcd and address 3
usb 5-5: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
gspca: main v2.7.0 registered
gspca: probing 041e:4055
zc3xx: Sensor Tas5130 (VF0250)
gspca: probe ok
usbcore: registered new interface driver zc3xx
zc3xx: registered
usb 5-5: USB disconnect, address 3
gspca: usb_submit_urb alt 2 err -19
gspca: disconnect complete
gspca: open failed err -19
gspca: open failed err -19
what this error means ..i think problem in
device driver it is not able to open device..how to resolve this error???
On Sun, Jul 26, 2009 at 6:34 PM, Denis Loginov <dinvlad@gmail.com> wrote:
> Actually, according to http://linux-uvc.berlios.de/ , you can just try
> 'USB
> Video Class' Driver, i.e. Device Drivers -> Multimedia Devices -> Video
> Capture Adapters -> V4L USB Devices -> (M) USB Video Class (UVC) & (y) UVC
> input events device support
> (CONFIG_USB_VIDEO_CLASS=m & USB_VIDEO_CLASS_INPUT_EVDEV=y).
>
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: driver for 041e:4055 Creative Technology, Ltd Live! Cam Video IM
2009-07-31 4:24 ` amol verule
@ 2009-07-31 8:38 ` Jean-Francois Moine
2009-08-01 8:11 ` Jean-Francois Moine
1 sibling, 0 replies; 6+ messages in thread
From: Jean-Francois Moine @ 2009-07-31 8:38 UTC (permalink / raw)
To: amol verule; +Cc: Denis Loginov, Linux Media
On Fri, 31 Jul 2009 09:54:19 +0530
amol verule <amol.debian@gmail.com> wrote:
> thanks denis,
> after following these steps it worked me to
> detect device but not to read or get picture from device. it is
> giving error as usb 5-5: new high speed USB device using ehci_hcd and
> address 3 usb 5-5: configuration #1 chosen from 1 choice
> Linux video capture interface: v2.00
> gspca: main v2.7.0 registered
> gspca: probing 041e:4055
> zc3xx: Sensor Tas5130 (VF0250)
> gspca: probe ok
> usbcore: registered new interface driver zc3xx
> zc3xx: registered
> usb 5-5: USB disconnect, address 3
> gspca: usb_submit_urb alt 2 err -19
> gspca: disconnect complete
> gspca: open failed err -19
> gspca: open failed err -19
> what this error means ..i think
> problem in device driver it is not able to open device..how to
> resolve this error???
>
> On Sun, Jul 26, 2009 at 6:34 PM, Denis Loginov <dinvlad@gmail.com>
> wrote:
>
> > Actually, according to http://linux-uvc.berlios.de/ , you can just
> > try 'USB
> > Video Class' Driver, i.e. Device Drivers -> Multimedia Devices ->
> > Video Capture Adapters -> V4L USB Devices -> (M) USB Video Class
> > (UVC) & (y) UVC input events device support
> > (CONFIG_USB_VIDEO_CLASS=m & USB_VIDEO_CLASS_INPUT_EVDEV=y).
Hello Amol and Denis,
This webcam is not handled by gspca (it is VF0230, and not VF0250).
I already got a usbsnoop and I may say that it if not UVC compliant too.
With the usbsnoop and the register names in the V0230Dev.inf of the
ms-win driver, it should be easy to create a new driver, but:
- it seems it asks for a firmware which may be copyrighted,
- the images are compressed and the encoding is not known...
BTW, the linux video stuff is now discussed in the linux-media mailing
list (see Cc:).
Best regards.
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: driver for 041e:4055 Creative Technology, Ltd Live! Cam Video IM
2009-07-31 4:24 ` amol verule
2009-07-31 8:38 ` Jean-Francois Moine
@ 2009-08-01 8:11 ` Jean-Francois Moine
1 sibling, 0 replies; 6+ messages in thread
From: Jean-Francois Moine @ 2009-08-01 8:11 UTC (permalink / raw)
To: amol verule; +Cc: Denis Loginov, Linux Media, Franck Bourdonnec
Hello Amol,
Looking back in my mails, I found that the driver for your webcam is
'm5603c'. It has been written and ported to gspca v2 by Franck
Bourdonnec (hello Franck!), but it is not yet integrated in the kernel.
Looking at the m560x project at sourceforge, it seems that nothing
happended since many months. So, I don't know if the driver works. Here
are the source files:
http://m560x-driver.svn.sourceforge.net/viewvc/m560x-driver/
Best regards.
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <77ca8eab0907230657t7d284a6cqac2da26d4d80b8d4@mail.gmail.com>]
* driver for 041e:4055 Creative Technology, Ltd Live! Cam Video IM
[not found] <77ca8eab0907230657t7d284a6cqac2da26d4d80b8d4@mail.gmail.com>
@ 2009-07-23 14:02 ` amol verule
0 siblings, 0 replies; 6+ messages in thread
From: amol verule @ 2009-07-23 14:02 UTC (permalink / raw)
To: video4linux-list
[-- Attachment #1: Type: text/plain, Size: 1811 bytes --]
dear all,
i have device 041e:4055 Creative Technology, Ltd Live! Cam
Video IM.after connecting usb cam to system dmesg shows
[ 1051.460131] gspca: Unknown symbol video_devdata
[ 1051.460555] gspca: Unknown symbol video_unregister_device
[ 1051.460713] gspca: Unknown symbol video_device_alloc
[ 1051.460788] gspca: Unknown symbol video_register_device
[ 1051.461074] gspca: Unknown symbol video_usercopy
[ 1051.461148] gspca: Unknown symbol video_device_release
[ 1211.843393] Linux video capture interface: v2.00
[ 1211.846763] usbcore: registered new interface driver gspca
[ 1211.846768] gspca: gspca driver 01.00.20 registered
[ 2710.916370] usbcore: deregistering interface driver gspca
[ 2710.916406] gspca: driver gspca deregistered
[ 2728.931714] usbcore: registered new interface driver gspca
[ 2728.931721] gspca: gspca driver 01.00.20 registered
[10464.917130] usb 5-7: USB disconnect, address 3
[10474.040025] usb 5-8: new high speed USB device using ehci_hcd and address
4
[10474.258411] usb 5-8: configuration #1 chosen from 1 choice
[10474.258411] usb 5-8: New USB device found, idVendor=041e, idProduct=4055
[10474.258411] usb 5-8: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[10474.258411] usb 5-8: Product: Creative Live! Cam Video IM Pro
[11734.195805] usb 5-8: USB disconnect, address 4
#lsusb -vv (output is attached with mail)
#lsusb
Bus 006 Device 003: ID 041e:4055 Creative Technology, Ltd Live! Cam Video IM
Pro
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 004 Device 003: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
please anyone can help to do change in driver code to run webcam in Linux???
[-- Attachment #2: lsusb --]
[-- Type: application/octet-stream, Size: 20421 bytes --]
Bus 006 Device 003: ID 041e:4055 Creative Technology, Ltd Live! Cam Video IM Pro
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x041e Creative Technology, Ltd
idProduct 0x4055 Live! Cam Video IM Pro
bcdDevice 1.02
iManufacturer 0
iProduct 1 Creative Live! Cam Video IM Pro
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 101
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 4
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 4
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1380 3x 896 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 4
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x12c0 3x 704 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 4
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 006 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22-3-486 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:13.5
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 10
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0503 highspeed power enable connect
Port 9: 0000.0100 power
Port 10: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 005 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22-3-486 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:13.4
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0002
No power switching (usb 1.0)
Ganged overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22-3-486 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:13.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0002
No power switching (usb 1.0)
Ganged overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 004 Device 003: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc018 Optical Wheel Mouse
bcdDevice 43.01
iManufacturer 1 Logitech
iProduct 2 USB Optical Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 52
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0005 1x 5 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22-3-486 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:13.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0002
No power switching (usb 1.0)
Ganged overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0303 lowspeed power enable connect
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22-3-486 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:13.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0002
No power switching (usb 1.0)
Ganged overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22-3-486 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:13.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0002
No power switching (usb 1.0)
Ganged overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-08-01 8:11 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-07-25 21:32 driver for 041e:4055 Creative Technology, Ltd Live! Cam Video IM Denis Loginov
-- strict thread matches above, loose matches on Subject: below --
2009-07-26 13:04 Denis Loginov
2009-07-31 4:24 ` amol verule
2009-07-31 8:38 ` Jean-Francois Moine
2009-08-01 8:11 ` Jean-Francois Moine
[not found] <77ca8eab0907230657t7d284a6cqac2da26d4d80b8d4@mail.gmail.com>
2009-07-23 14:02 ` amol verule
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox