From: Eugene Yudin <eugene.yudin@gmail.com>
To: hermann pitton <hermann-pitton@arcor.de>
Cc: linux-media@vger.kernel.org
Subject: Re: [PATCH] Add support for RoverMedia TV Link Pro FM v3
Date: Fri, 28 Aug 2009 19:17:22 +0400 [thread overview]
Message-ID: <200908281917.23079.Eugene.Yudin@gmail.com> (raw)
In-Reply-To: <200908281846.01964.Eugene.Yudin@gmail.com>
В сообщении от Пятница 28 августа 2009 18:46:01 автор Eugene Yudin написал:
> Updated patch is at the end of letter. I also checked the auto-detection.
> It works correctly with this "modprobe.conf":
> alias char-major-81 videodev
> alias char-major-81-0 saa7134
> options saa7134 i2c_scan=1
Sorry, I'm a little confused. Tuner working great with:
> alias char-major-81 videodev
> alias char-major-81-0 saa7134
> options saa7134 secam=dk
Dmesg:
saa7130/34: v4l2 driver version 0.2.15 loaded
saa7134 0000:01:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ
19
saa7134[0]: found at 0000:01:07.0, rev: 1, irq: 19, latency: 32, mmio:
0xea000000
saa7134[0]: subsystem: 19d1:0138, board: RoverMedia TV Link Pro FM
[card=170,autodetected]
saa7134[0]: board init: gpio is 3b000
input: saa7134 IR (RoverMedia TV Link as
/devices/pci0000:00/0000:00:08.0/0000:01:07.0/input/input6
IRQ 19/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
saa7134[0]: i2c eeprom 00: d1 19 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c scan: found device @ 0x86 [tda9887]
saa7134[0]: i2c scan: found device @ 0xa0 [eeprom]
saa7134[0]: i2c scan: found device @ 0xc2 [???]
tuner 2-0043: chip found @ 0x86 (saa7134[0])
tuner 2-0061: chip found @ 0xc2 (saa7134[0])
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
saa7134 ALSA driver for DMA sound loaded
IRQ 19/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
saa7134[0]/alsa: saa7134[0] at 0xea000000 irq 19 registered as card -1
It also determined correctly with setting i2c_scan = 1, but seems to be using
some other tuner.
next prev parent reply other threads:[~2009-08-28 15:16 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-27 17:04 [PATCH] Add support for RoverMedia TV Link Pro FM Eugene Yudin
2009-08-27 20:59 ` [PATCH] Add support for RoverMedia TV Link Pro FM v2 Eugene Yudin
2009-08-27 23:24 ` hermann pitton
2009-08-28 0:54 ` hermann pitton
2009-08-28 14:46 ` [PATCH] Add support for RoverMedia TV Link Pro FM v3 Eugene Yudin
2009-08-28 15:17 ` Eugene Yudin [this message]
2009-08-28 20:49 ` hermann pitton
2009-08-29 12:13 ` Eugene Yudin
2009-08-29 12:32 ` [PATCH] Add support for RoverMedia TV Link Pro FM Eugene Yudin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200908281917.23079.Eugene.Yudin@gmail.com \
--to=eugene.yudin@gmail.com \
--cc=hermann-pitton@arcor.de \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox