From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp3-g21.free.fr ([212.27.42.3]:37044 "EHLO smtp3-g21.free.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753632AbZH3S2M (ORCPT ); Sun, 30 Aug 2009 14:28:12 -0400 Date: Sun, 30 Aug 2009 20:28:04 +0200 From: Jean-Francois Moine To: Sudipto Sarkar Cc: linux-media@vger.kernel.org, SPCA50x Linux Device Driver Development Subject: Re: HP VGA Cam Message-ID: <20090830202804.66f9b815@tele> In-Reply-To: <4A9A66B0.10202@gmail.com> References: <4A9A66B0.10202@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: linux-media-owner@vger.kernel.org List-ID: On Sun, 30 Aug 2009 17:16:56 +0530 Sudipto Sarkar wrote: > I'm trying to write a driver for the HP VGA camera. USB ID: > 15b8:6002. The sensor is 7131r, and the bridge is probably vc0323 > (although the inf says it's vc0326). It's inf is the same inf which > includes the po1200 sensor, which was added in December last year > (The HP 2.0 Megapixel camera). I am trying to use usbsnoop in a > windows installation, but the log size just does not cease to come to > a halt (as is specified in the microdia site), thereby leaving me > unable to snoop the init sequence. What might be wrong? > > Also, is this the same sensor as hv7131r, as in vc032x.c? Hello Sudipto, Did you try the last gspca v2 from my test repository? As there is a probe sequence in the vc032x subdriver, the kernel log should contain the sensor name. What is it? If you cannot get images, may you tell me what is wrong? (does 'svv' display some image? does 'svv -rg' create a raw image? what are the last kernel messages? ...) Best regards. -- Ken ar c'hentań | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/