Re: MSI Digivox mini III Remote Control

["Aleksandr V. Piskunov" <aleksandr.v.piskunov@gmail.com>]

Just grab that patch and apply it to the current vl4-dvb, no need to mess
with old repository.
http://linuxtv.org/hg/~anttip/af9015-digivox3_remote/raw-rev/914ded6d921d

Now if the current tree doesn't compile, thats another issue, probably
something with kernel headers, etc.

Actually thats interesting, I will test it on 64-bit Windows 7 when I get
home, will RMA that stick if remote doesn't work.

As for channel switching, it's most likely a tv viewing software issue, 
buffering or something like that. For me this tuner locks to transponder
in aprox. 1 second.

On Mon, Sep 21, 2009 at 12:53:49PM +0200, Roman wrote:
> Hi,
> 
> thx for the tip, i jusst tested it on Windows 7 and i was amazed....
> Not only the remote worked perfectly out of the box, also the software used 
> (some media-center from ArcSoft), worked flawless. (I last used a Hauppauge 
> TV-Card about 2 years ago on windows).
> One thing to note is the channel switching was a LOT faster (max. 1sec.) than 
> on linux (sometimes > 5sec.).
> 
> Anyway, the remote works on windows, no i am trying to compile the mentioned 
> repository, but it seems to fail compiling.
> I already sent a mail to the msi-support...
> 
> #------
> make[2]: Entering directory `/home/strowi/src/zen-sources'
>   CC [M]  /home/strowi/src/af9015-digivox3_remote/v4l/au0828-cards.o
> In file included from /home/strowi/src/af9015-digivox3_remote/v4l/dmxdev.h:33,
>                  from /home/strowi/src/af9015-digivox3_remote/v4l/au0828.h:29,
>                  
> from /home/strowi/src/af9015-digivox3_remote/v4l/au0828-cards.c:22:
> /home/strowi/src/af9015-digivox3_remote/v4l/compat.h:385: error: redefinition 
> of 'usb_endpoint_type'
> include/linux/usb/ch9.h:377: error: previous definition of 'usb_endpoint_type' 
> was here
> make[3]: *** [/home/strowi/src/af9015-digivox3_remote/v4l/au0828-cards.o] 
> Error 1
> #------
> 
> Am Monday 21 September 2009 10:19:33 schrieb Aleksandr V. Piskunov:
> > Well, it seems there is a patch for Digivox mini III remote control at
> > http://linuxtv.org/hg/~anttip/af9015-digivox3_remote/, perhaps Antti
> > can tell you more about it.
> >
> > I got this tuner, and no, IR receiver doesn't work for me, it doesn't
> > even work in WinXP with bundled drivers and software, tested with
> > USB snoop, no reaction to keypresses. Maybe a hardware defect at
> > receiver part, maybe something is missing in a firmware, no idea.
> >
> > So check it on some Windows system first, then try patch..
> >
> 
> greetings,
> Roman
> -- 
> Iron Law of Distribution:
> 	Them that has, gets.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html