From: Roman <lists@hasnoname.de>
To: Antti Palosaari <crope@iki.fi>
Cc: "Aleksandr V. Piskunov" <aleksandr.v.piskunov@gmail.com>,
"linux-media@vger.kernel.org" <linux-media@vger.kernel.org>
Subject: Re: MSI Digivox mini III Remote Control
Date: Mon, 21 Sep 2009 15:55:11 +0200 [thread overview]
Message-ID: <200909211555.11747.lists@hasnoname.de> (raw)
In-Reply-To: <4AB77329.5000405@iki.fi>
Am Monday 21 September 2009 14:35:53 schrieb Antti Palosaari:
> On 09/21/2009 02:51 PM, Aleksandr V. Piskunov wrote:
> > Just grab that patch and apply it to the current vl4-dvb, no need to mess
> > with old repository.
> > http://linuxtv.org/hg/~anttip/af9015-digivox3_remote/raw-rev/914ded6d921d
>
> With this patch remote will not work most likely. But after adding that
> patch you should see remote events dumped to the /var/log/messages when
> key is pressed. I need to know which key gives which code. After that I
> can add correct key mappings to the driver.
>
> Antti
I don't get anything else in the logs than this, even with the patch applied:
#---
Sep 21 15:43:04 Seth usbcore: registered new interface driver dvb_usb_af9015
Sep 21 15:43:07 Seth usb 1-5: new high speed USB device using ehci_hcd and
address 4
Sep 21 15:43:08 Seth usb 1-5: configuration #1 chosen from 1 choice
Sep 21 15:43:08 Seth dvb-usb: found a 'MSI Digi VOX mini III' in cold state,
will try to load a firmware
Sep 21 15:43:08 Seth usb 1-5: firmware: requesting dvb-usb-af9015.fw
Sep 21 15:43:08 Seth dvb-usb: downloading firmware from
file 'dvb-usb-af9015.fw'
Sep 21 15:43:08 Seth dvb-usb: found a 'MSI Digi VOX mini III' in warm state.
Sep 21 15:43:08 Seth dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
Sep 21 15:43:08 Seth DVB: registering new adapter (MSI Digi VOX mini III)
Sep 21 15:43:08 Seth af9013: firmware version:4.95.0
Sep 21 15:43:08 Seth DVB: registering adapter 0 frontend 0 (Afatech AF9013
DVB-T)...
Sep 21 15:43:08 Seth tda18271 3-00c0: creating new instance
Sep 21 15:43:08 Seth TDA18271HD/C1 detected @ 3-00c0
Sep 21 15:43:08 Seth dvb-usb: MSI Digi VOX mini III successfully initialized
and connected.
Sep 21 15:43:51 Seth [drm] LVDS-8: set mode 1024x768 10
#---
Gruß,
Roman
--
When I was in school, I cheated on my metaphysics exam: I looked into
the soul of the boy sitting next to me.
-- Woody Allen
next prev parent reply other threads:[~2009-09-21 13:55 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200909202026.27086.lists@hasnoname.de>
2009-09-21 8:19 ` MSI Digivox mini III Remote Control Aleksandr V. Piskunov
2009-09-21 10:53 ` Roman
2009-09-21 11:51 ` Aleksandr V. Piskunov
2009-09-21 12:35 ` Antti Palosaari
2009-09-21 13:55 ` Roman [this message]
2009-09-21 14:00 ` Antti Palosaari
2009-09-21 14:10 ` Roman
2009-09-21 14:19 ` Antti Palosaari
2009-09-21 14:31 ` Roman
2009-09-21 18:26 ` Aleksandr V. Piskunov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200909211555.11747.lists@hasnoname.de \
--to=lists@hasnoname.de \
--cc=aleksandr.v.piskunov@gmail.com \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox