From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from m3.goneo.de ([82.100.220.82]:59581 "EHLO m3.goneo.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756324AbZIUObY (ORCPT ); Mon, 21 Sep 2009 10:31:24 -0400 From: Roman To: Antti Palosaari Subject: Re: MSI Digivox mini III Remote Control Date: Mon, 21 Sep 2009 16:31:19 +0200 Cc: "Aleksandr V. Piskunov" , "linux-media@vger.kernel.org" References: <200909202026.27086.lists@hasnoname.de> <200909211610.52856.lists@hasnoname.de> <4AB78B79.3030203@iki.fi> In-Reply-To: <4AB78B79.3030203@iki.fi> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200909211631.19838.lists@hasnoname.de> Sender: linux-media-owner@vger.kernel.org List-ID: Hi Antti, Am Monday 21 September 2009 16:19:37 schrieb Antti Palosaari: > > Here is the output of dmesg after reloading the module: > > #-- > > af9015_usb_probe: interface:0 > > af9015_read_config: IR mode:4 > > IR mode 4 disables it. I have strong feeling it should mean "polling"... > Could you change af9015.c around line 720: > from: if (val == AF9015_IR_MODE_DISABLED || val == 0x04) { > to: if (val == AF9015_IR_MODE_DISABLED) { > > and test again. > Antti Ahh progress... ;) I did as you suggested, now dmesg shows the IR-device: #-- Sep 21 16:25:50 Seth input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/input/input7 Sep 21 16:25:50 Seth dvb-usb: schedule remote query interval to 150 msecs #-- And syslog shows requests like the following: #-- Sep 21 16:26:33 Seth af9015_rc_query: 07 00 27 00 00 00 00 00 #-- If it is ok, i will mail the output to you (and not spam the ml), later this day or tomorrow morning, as i have to leave for the university now... greetings, Roman -- Troubled day for virgins over 16 who are beautiful and wealthy and live in eucalyptus trees.