From: Mario Bachmann <grafgrimm77@gmx.de>
To: linux-media@vger.kernel.org
Subject: dib3000mb dvb-t with kernel 2.6.32-rc3 do not work
Date: Mon, 5 Oct 2009 09:51:44 +0200 [thread overview]
Message-ID: <20091005095144.3551deb3@x2.grafnetz> (raw)
Hi there,
with kernel 2.6.30.8 my "TwinhanDTV USB-Ter USB1.1 / Magic Box I"
worked.
Now with kernel 2.6.32-rc3 (and 2.6.31.1) the modules seems to be
loaded fine, but tzap/kaffeine/mplayer can not tune to a channel:
dmesg says:
dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state.
dvb-usb: will use the device's hardware PID filter (table count: 16).
DVB: registering new adapter (TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device)
DVB: registering adapter 0 frontend 0 (DiBcom 3000M-B DVB-T)...
dibusb: This device has the Thomson Cable onboard. Which is default.
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.0/usb4/4-2/input/input5
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dibusb_mb
grep DVB .config says (no chaanges between 2.6.30.8 and 2.6.32-rc3):
CONFIG_DVB_CORE=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_CAPTURE_DRIVERS=y
CONFIG_DVB_USB=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_PLL=m
lsmod |grep dvb
dvb_usb_dibusb_mb 16715 0
dvb_usb_dibusb_common 3559 1 dvb_usb_dibusb_mb
dvb_pll 8604 1 dvb_usb_dibusb_mb
dib3000mb 10969 1 dvb_usb_dibusb_mb
dvb_usb 13737 2 dvb_usb_dibusb_mb,dvb_usb_dibusb_common
dvb_core 85727 1 dvb_usb
tzap arte -r
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
reading channels from file '/home/grafrotz/.tzap/channels.conf'
tuning to 602000000 Hz
video pid 0x00c9, audio pid 0x00ca
status 00 | signal 0000 | snr 0000 | ber 001fffff | unc 0000ffff |
status 00 | signal 0000 | snr 0000 | ber 001fffff | unc 0000ffff |
status 04 | signal 0000 | snr 0000 | ber 001fffff | unc 0000ffff |
status 04 | signal 0000 | snr 0000 | ber 001fffff | unc 0000ffff |
status 04 | signal 0000 | snr 0000 | ber 001fffff | unc 0000ffff |
status 04 | signal 00b2 | snr 0000 | ber 001fffff | unc 0000ffff |
status 04 | signal 0000 | snr 0000 | ber 001fffff | unc 0000ffff |
status 04 | signal 0000 | snr 0000 | ber 001fffff | unc 0000ffff |
status 04 | signal 0000 | snr 0000 | ber 001fffff | unc 0000ffff |
status 04 | signal 0000 | snr 0000 | ber 001fffff | unc 0000ffff |
status 04 | signal 0000 | snr 0000 | ber 001fffff | unc 0000ffff |
and so on. The signal-values are zero or near zero, but when i boot the old kernel 2.6.30.8, t can tune without problems.
kaffeine DVB says:
Using DVB device 0:0 "DiBcom 3000M-B DVB-T"
tuning DVB-T to 602000000 Hz
inv:2 bw:0 fecH:2 fecL:9 mod:1 tm:1 gi:3 hier:0
................
Not able to lock to the signal on the given frequency
Frontend closed
Tuning delay: 2611 ms
mplayer dvb://arte says:
MPlayer SVN-r29699-4.4.1 (C) 2000-2009 MPlayer Team
Spiele dvb://arte.
dvb_tune Freq: 602000000
Not able to lock to the signal on the given frequency, timeout: 30
dvb_tune, TUNING FAILED
ERROR, COULDN'T SET CHANNEL 13: Konnte 'dvb://arte' nicht öffnen.
Beenden... (Dateiende erreicht)
Greetings
Mario
next reply other threads:[~2009-10-05 7:52 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-05 7:51 Mario Bachmann [this message]
2009-10-05 13:50 ` dib3000mb dvb-t with kernel 2.6.32-rc3 do not work Patrick Boettcher
2009-10-05 14:49 ` Mario Bachmann
2009-10-14 15:40 ` Mario Bachmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091005095144.3551deb3@x2.grafnetz \
--to=grafgrimm77@gmx.de \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox