From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-bw0-f210.google.com ([209.85.218.210]:41309 "EHLO mail-bw0-f210.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754767AbZJLXYH (ORCPT ); Mon, 12 Oct 2009 19:24:07 -0400 Received: by bwz6 with SMTP id 6so3505882bwz.37 for ; Mon, 12 Oct 2009 16:23:29 -0700 (PDT) Date: Tue, 13 Oct 2009 01:22:55 +0200 From: Giuseppe Borzi To: linux-media@vger.kernel.org Subject: Re: Dazzle TV Hybrid USB and em28xx Message-ID: <20091013012255.260afea3@ieee.org> In-Reply-To: <829197380910121437m4f1fb7cld8d7dc351f468671@mail.gmail.com> References: <829197380910111218q5739eb5ex9a87f19899a13e98@mail.gmail.com> <829197380910121437m4f1fb7cld8d7dc351f468671@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: > > Yeah, that happens with Ubuntu Karmic. The v4l-dvb firedtv driver > depends on headers that are private to ieee1394 and not in their > kernel headers package. > > To workaround the issue, open v4l/.config and set the firedtv driver > from "=m" to "=n" > > Devin > Thanks Devin, following your instruction for firedtv I've compiled v4l-dvb-5578cc977a13 but the results aren't so good. After doing an "make rminstall" , compiling and "make install" I plugged the USB stick, the various devices were created (including /dev/dvb) and here is the dmesg output (now it's identified as card=1) usb 1-3.1: new high speed USB device using ehci_hcd and address 7 usb 1-3.1: configuration #1 chosen from 1 choice Linux video capture interface: v2.00 em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) em28xx #0: chip ID is em2882/em2883 em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00 em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20 em28xx #0: EEPROM info: em28xx #0: AC97 audio (5 sample rates) em28xx #0: USB Remote wakeup capable em28xx #0: 500mA max power em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) em28xx #0: Your board has no unique USB ID. em28xx #0: A hint were successfully done, based on eeprom hash. em28xx #0: This method is not 100% failproof. em28xx #0: If the board were missdetected, please email this log to: em28xx #0: V4L Mailing List em28xx #0: Board detected as Pinnacle Hybrid Pro tvp5150 2-005c: chip found @ 0xb8 (em28xx #0) tuner 2-0061: chip found @ 0xc2 (em28xx #0) xc2028 2-0061: creating new instance xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner usb 1-3.1: firmware: requesting xc3028-v27.fw xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000. xc2028 2-0061: Loading firmware for type=(0), id 000000000000b700. SCODE (20000000), id 000000000000b700: xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. em28xx #0: Config register raw data: 0x58 em28xx #0: AC97 vendor ID = 0xffffffff em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected tvp5150 2-005c: tvp5150am1 detected. em28xx #0: v4l2 driver version 0.1.2 em28xx #0: V4L2 video device registered as /dev/video0 em28xx #0: V4L2 VBI device registered as /dev/vbi0 em28xx audio device (eb1a:2881): interface 1, class 1 em28xx audio device (eb1a:2881): interface 2, class 1 usbcore: registered new interface driver em28xx em28xx driver loaded usbcore: registered new interface driver snd-usb-audio xc2028 2-0061: attaching existing instance xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner em28xx #0/2: xc3028 attached DVB: registering new adapter (em28xx #0) DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... Successfully loaded em28xx-dvb Em28xx: Initialized (Em28xx dvb Extension) extension tvp5150 2-005c: tvp5150am1 detected. xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. xc2028 2-0061: Loading firmware for type=D2633 DTV8 (210), id 0000000000000000. xc2028 2-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. xc2028 2-0061: Loading firmware for type=D2633 DTV8 (210), id 0000000000000000. xc2028 2-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. xc2028 2-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. xc2028 2-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. tvp5150 2-005c: tvp5150am1 detected. xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. (0), id 00000000000000ff: xc2028 2-0061: Loading firmware for type=(0), id 0000000100000007. xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007. mtt[18144]: segfault at 0 ip (null) sp 00007fffcd5b12f8 error 4 in mtt[400000+26000] tvp5150 2-005c: tvp5150am1 detected. xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. (0), id 00000000000000ff: xc2028 2-0061: Loading firmware for type=(0), id 0000000100000007. xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007. tvp5150 2-005c: tvp5150am1 detected. tvp5150 2-005c: tvp5150am1 detected. xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. (0), id 00000000000000ff: xc2028 2-0061: Loading firmware for type=(0), id 0000000100000007. xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007. tvp5150 2-005c: tvp5150am1 detected. tvp5150 2-005c: tvp5150am1 detected. xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. (0), id 00000000000000ff: xc2028 2-0061: Loading firmware for type=(0), id 0000000100000007. xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007. xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. xc2028 2-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. xc2028 2-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. xc2028 2-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. xc2028 2-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. xc2028 2-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. xc2028 2-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. wlan0: disassociating by local choice (reason=3) [drm] TV-14: set mode NTSC 480i 0 then I started checking if it works. The command "vlc channels.conf" works, i.e. it plays the first channel in the list, but is unable to switch channel. me-tv doesn't start, but I think this is related to the recent gnome upgrade. w_scan doesn't find any channel. Analog TV only shows video, no audio. Tried this both with sox and vlc. When you say that I have to choose the right TV standard (PAL for my region) do you mean I have to select this in the TV app I'm using (tvtime, vlc, xawtv) or as a module option? I've not seen any em28xx option for TV standard, so I suppose it's in the app. Finally, I've noticed that the device is much less hot than it happened with out of kernel modules and the card=11 workaround. Is your latest post "em28xx mode switching" related to my device?