From: Jean Delvare <khali@linux-fr.org>
To: Andy Walls <awalls@radix.net>
Cc: linux-media@vger.kernel.org,
Matthias Fechner <idefix@fechner.net>,
Jarod Wilson <jarod@wilsonet.com>,
"Igor M. Liplianin" <liplianin@me.by>
Subject: Re: IR Receiver on an Tevii S470
Date: Sun, 22 Nov 2009 21:26:44 +0100 [thread overview]
Message-ID: <20091122212644.301b7e63@hyperion.delvare> (raw)
In-Reply-To: <1258920707.4201.16.camel@palomino.walls.org>
Hi Andy,
On Sun, 22 Nov 2009 15:11:47 -0500, Andy Walls wrote:
> On Sun, 2009-11-22 at 19:08 +0100, Matthias Fechner wrote:
> > thanks a lot for your answer.
> > I uploaded two pictures I did from the card, you can find it here:
> > http://fechner.net/tevii-s470/
> >
> > It is a CX23885.
> > The driver I use is the ds3000.
> > lspci says:
> [snip]
>
> Thanks for the pictures. OK so of the two other interesting chips on
> the S470:
>
> U4 is an I2C connected EEPROM - we don't care about that for IR.
>
> U10 appears to perhaps be a Silicon Labs C8051F300 microcontroller or
> similar:
>
> http://www.silabs.com/products/mcu/smallmcu/Pages/C8051F30x.aspx
>
> Since the 'F300 has an A/D convertor and has an SMBus interface
> (compatable with the I2C bus), I suspect this chip could be the IR
> controller on the TeVii S470.
>
> Could you as root:
>
> # modprobe cx23885
> # modprobe i2c-dev
> # i2c-detect -l
> (to list all the i2c buses, including cx23885 mastered i2c buses)
> # i2c-detect -y N
> (to show the addresses in use on bus # N: only query the cx23885 buses)
>
>
> i2c-detect was in the lm-sensors package last I checked. (Jean can
> correct me if I'm wrong.)
It is actually named "i2cdetect" (no dash). It used to live in the
lm-sensors package (up to 2.10.x) but is now in i2c-tools:
http://www.lm-sensors.org/wiki/I2CTools
> With that information, I should be able to figure out what I2C address
> that microcontroller is listening to.
--
Jean Delvare
next prev parent reply other threads:[~2009-11-22 20:26 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-18 20:31 IR Receiver on an Tevii S470 Matthias Fechner
2009-11-21 17:10 ` Matthias Fechner
2009-11-21 20:41 ` Andy Walls
2009-11-21 22:19 ` Jonas Kvinge
2009-11-22 1:03 ` Igor M. Liplianin
2009-11-22 2:48 ` Andy Walls
2009-11-22 18:08 ` Matthias Fechner
2009-11-22 20:11 ` Andy Walls
2009-11-22 20:25 ` Matthias Fechner
2009-11-22 20:32 ` Jean Delvare
2009-11-23 0:17 ` Andy Walls
2009-11-23 8:54 ` Jean Delvare
2009-11-25 0:25 ` Andy Walls
2009-11-26 16:43 ` Matthias Fechner
2009-11-29 14:22 ` Andy Walls
2009-11-22 20:26 ` Jean Delvare [this message]
2009-11-22 22:29 ` Igor M. Liplianin
2009-11-22 23:40 ` Andy Walls
2009-12-06 21:40 ` Andy Walls
2009-12-06 22:36 ` Matthias Fechner
2009-12-07 1:23 ` Igor M. Liplianin
2009-12-07 3:35 ` Andy Walls
2009-12-08 17:59 ` Igor M. Liplianin
2009-12-09 11:47 ` Andy Walls
2009-12-09 15:54 ` Igor M. Liplianin
2009-12-10 1:12 ` Andy Walls
2009-12-10 16:16 ` Igor M. Liplianin
2009-12-11 2:32 ` Andy Walls
-- strict thread matches above, loose matches on Subject: below --
2009-11-23 0:15 Igor M. Liplianin
2009-12-12 0:30 Igor M. Liplianin
2009-12-12 1:00 ` Andy Walls
2009-12-12 1:42 ` Igor M. Liplianin
2009-12-12 2:58 ` Andy Walls
2009-12-12 11:49 ` Igor M. Liplianin
2009-12-12 14:15 ` Andy Walls
2009-12-12 16:01 ` Igor M. Liplianin
2009-12-12 16:22 ` Igor M. Liplianin
2009-12-12 16:59 ` Andy Walls
2009-12-31 12:46 ` Guillem Solà Aranda
2009-12-31 15:23 ` Igor M. Liplianin
2010-01-06 21:21 ` Andreas Tschirpke
2010-01-07 0:44 ` Andy Walls
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091122212644.301b7e63@hyperion.delvare \
--to=khali@linux-fr.org \
--cc=awalls@radix.net \
--cc=idefix@fechner.net \
--cc=jarod@wilsonet.com \
--cc=linux-media@vger.kernel.org \
--cc=liplianin@me.by \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox