From: "Antonio Marcos López Alonso" <amlopezalonso@gmail.com>
To: linux-media@vger.kernel.org
Subject: Re: How to make a Zaapa LR301AP DVB-T card work
Date: Sun, 20 Dec 2009 13:13:31 +0000 [thread overview]
Message-ID: <200912201313.31384.amlopezalonso@gmail.com> (raw)
In-Reply-To: <1261252417.3220.3.camel@pc07.localdom.local>
>
> please try with "card=86".
>
> If everything is fine, we add it to auto detection.
>
> Cheers,
> Hermann
>
Did it so and the card (TDA10046 chip ) is now detected by MythTV (have to say
previous setup was not detected by Kaffeine because MythTV backend was
running). However scanning process did not find any channel and I'm sure
previous cards have worked doing so.
New "dmesg|grep saa" output:
*********************************
[ 8.840823] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 8.841237] saa7134 0000:00:0c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level,
low) -> IRQ 11
[ 8.841244] saa7134[0]: found at 0000:00:0c.0, rev: 1, irq: 11, latency:
64, mmio: 0xdffffc00
[ 8.841251] saa7134[0]: subsystem: 4e42:0301, board: LifeView FlyDVB-T /
Genius VideoWonder DVB-T [card=86,insmod option]
[ 8.841272] saa7134[0]: board init: gpio is 10000
[ 8.841369] input: saa7134 IR (LifeView FlyDVB-T / as
/devices/pci0000:00/0000:00:0c.0/input/input5
[ 8.841411] IRQ 11/saa7134[0]: IRQF_DISABLED is not guaranteed on shared
IRQs
[ 8.992137] saa7134[0]: i2c eeprom 00: 42 4e 01 03 54 20 1c 00 43 43 a9 1c
55 d2 b2 92
[ 8.992147] saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff
ff ff ff ff
[ 8.992155] saa7134[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 e2
ff ff ff ff
[ 8.992163] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 8.992170] saa7134[0]: i2c eeprom 40: ff 1b 00 c0 ff 10 01 00 ff ff ff ff
ff ff ff ff
[ 8.992177] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 8.992185] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 8.992192] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 8.992199] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 8.992207] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 8.992214] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 8.992221] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 8.992229] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 8.992236] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 8.992243] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 8.992250] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 8.992393] saa7134[0]: registered device video0 [v4l2]
[ 8.992418] saa7134[0]: registered device vbi0
[ 9.533985] DVB: registering new adapter (saa7134[0])
[ 10.279639] saa7134 ALSA driver for DMA sound loaded
[ 10.279652] IRQ 11/saa7134[0]: IRQF_DISABLED is not guaranteed on shared
IRQs
[ 10.279679] saa7134[0]/alsa: saa7134[0] at 0xdffffc00 irq 11 registered as
card -1
Cheers
Antonio
next prev parent reply other threads:[~2009-12-20 13:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-19 14:00 How to make a Zaapa LR301AP DVB-T card work Antonio Marcos López Alonso
2009-12-19 19:53 ` hermann pitton
2009-12-20 13:13 ` Antonio Marcos López Alonso [this message]
2009-12-21 20:51 ` hermann pitton
2009-12-22 16:41 ` Antonio Marcos López Alonso
2009-12-23 1:50 ` hermann pitton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200912201313.31384.amlopezalonso@gmail.com \
--to=amlopezalonso@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox