From: Armando Baia <armbaia@gmail.com>
To: linux-media@vger.kernel.org
Subject: [248.815294] DVB: adapter 0 frontend 0 symbol rate 4800000 out of range (5000000..45000000)
Date: Sat, 2 Jan 2010 11:21:02 +0000 [thread overview]
Message-ID: <201001021121.03197.armbaia@gmail.com> (raw)
Sorry if some phrases in the text does not make sense, I Portuguese do not
speak English, this text is translated by google.
I am not a expert with computers, so it is natural that does not do things
well, but this is my problem!
Using openSUSE 11.2 with kernel 2.6.31.5-0.1-desktop. I have installed a card
Technotrend budget dvb-s 3200, which in windows is to scan all frequencies,
but Linux does not scan the frequencies SymbolRate less than 5000! I leave you
with the information that within my limited knowledge of the system,may lead
to solving the problem.
linux-o2b8:~ # dmesg
[ 0.000000] Linux version 2.6.31.5-0.1-desktop (geeko@buildhost) (gcc
version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT
2009-10-26 15:49:03 +0100
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f7ae000 - 000000003f7e0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7e0000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x3f7a0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f7a0000 (usable)
[ 0.000000] modified: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
[ 0.000000] modified: 000000003f7ae000 - 000000003f7e0000 (ACPI NVS)
[ 0.000000] modified: 000000003f7e0000 - 000000003f800000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0036e00000 page 2M
[ 0.000000] 0036e00000 - 0036ffe000 page 4k
[ 0.000000] kernel direct mapping tables up to 36ffe000 @ 10000-1b000
[ 0.000000] RAMDISK: 379aa000 - 37feff0f
[ 0.000000] Allocated new RAMDISK: 00af7000 - 0113cf0f
[ 0.000000] Move RAMDISK from 00000000379aa000 - 0000000037feff0e to
00af7000 - 0113cf0e
[ 0.000000] ACPI: RSDP 000fb030 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3f7a0000 0003C (v01 ?????? ???????? 08000701 MSFT
00000097)
[ 0.000000] ACPI: FACP 3f7a0200 00084 (v02 A_M_I_ OEMFACP 08000701 MSFT
00000097)
[ 0.000000] ACPI: DSDT 3f7a05c0 0682B (v01 A0798 A0798000 00000000 INTL
20051117)
[ 0.000000] ACPI: FACS 3f7ae000 00040
[ 0.000000] ACPI: APIC 3f7a0390 0006C (v01 A_M_I_ OEMAPIC 08000701 MSFT
00000097)
[ 0.000000] ACPI: MCFG 3f7a0400 0003C (v01 A_M_I_ OEMMCFG 08000701 MSFT
00000097)
[ 0.000000] ACPI: SLIC 3f7a0440 00176 (v01 ?????? ???????? 08000701 MSFT
00000097)
[ 0.000000] ACPI: OEMB 3f7ae040 00080 (v01 A_M_I_ AMI_OEM 08000701 MSFT
00000097)
[ 0.000000] ACPI: HPET 3f7a6df0 00038 (v01 A_M_I_ OEMHPET 08000701 MSFT
00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] could not find any ACPI SRAT memory areas.
[ 0.000000] failed to get NUMA memory information from SRAT table
[ 0.000000] NUMA - single node, flat memory mode
[ 0.000000] Node: 0, start_pfn: 0, end_pfn: 3f7a0
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000
2c000 30000 34000 38000 3c000
[ 0.000000] node 0 pfn: [0 - 3f7a0]
[ 0.000000] Reserving 2048 pages of KVA for lmem_map of node 0 at 3ee00
[ 0.000000] remove_active_range (0, 257536, 259584)
[ 0.000000] Reserving total of 800 pages for numa KVA remap
[ 0.000000] kva_start_pfn ~ 36600 max_low_pfn ~ 36ffe
[ 0.000000] max_pfn = 3f7a0
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 879MB LOWMEM available.
[ 0.000000] max_low_pfn = 36ffe, highstart_pfn = 36ffe
[ 0.000000] Low memory ends at vaddr f6ffe000
[ 0.000000] node 0 will remap to vaddr f6600000 - f6e00000
[ 0.000000] allocate_pgdat: node 0 NODE_DATA f6600000
[ 0.000000] remap_numa_kva: node 0
[ 0.000000] remap_numa_kva: f6600000 to pfn 0003ee00
[ 0.000000] remap_numa_kva: f6800000 to pfn 0003f000
[ 0.000000] remap_numa_kva: f6a00000 to pfn 0003f200
[ 0.000000] remap_numa_kva: f6c00000 to pfn 0003f400
[ 0.000000] High memory starts at vaddr f6ffe000
[ 0.000000] mapped low ram: 0 - 36ffe000
[ 0.000000] low ram: 0 - 36ffe000
[ 0.000000] node 0 low ram: 00000000 - 36ffe000
[ 0.000000] node 0 bootmap 00018000 - 0001ee00
[ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 0036ffe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000
- 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000
- 0000007000]
[ 0.000000] #3 [0000200000 - 0000aeda90] TEXT DATA BSS ==> [0000200000
- 0000aeda90]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00
- 0000100000]
[ 0.000000] #5 [0000aee000 - 0000af6210] BRK ==> [0000aee000
- 0000af6210]
[ 0.000000] #6 [0000010000 - 0000018000] PGTABLE ==> [0000010000
- 0000018000]
[ 0.000000] #7 [0000af7000 - 000113cf0f] NEW RAMDISK ==> [0000af7000
- 000113cf0f]
[ 0.000000] #8 [003ee00000 - 003f600000] KVA RAM
[ 0.000000] #9 [0036600000 - 0036e00000] KVA PG ==> [0036600000
- 0036e00000]
[ 0.000000] #10 [0000018000 - 000001f000] BOOTMAP ==>
[0000018000 - 000001f000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00036ffe
[ 0.000000] HighMem 0x00036ffe -> 0x0003f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ee00
[ 0.000000] 0: 0x0003f600 -> 0x0003f7a0
[ 0.000000] On node 0 totalpages: 257839
[ 0.000000] free_area_init_node: node 0, pgdat f6600000, node_mem_map
f6602200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 219454 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 32402 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f800000 (gap:
3f800000:bf600000)
[ 0.000000] NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:8
[ 0.000000] PERCPU: Embedded 14 pages at c1142000, static data 34204 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 255807
[ 0.000000] Policy zone: HighMem
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-
Hitachi_HDS721680PLAT80_PV6805Z8S9RMEN-part2 resume=/dev/disk/by-id/ata-
Hitachi_HDS721680PLAT80_PV6805Z8S9RMEN-part3 splash=silent quiet vga=0x31a
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00036ffe:0003f7a0)
[ 0.000000] Memory: 1006476k/1040000k available (4719k kernel code, 24880k
reserved, 2944k data, 464k init, 130696k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff5b5000 - 0xfffff000 (10536 kB)
[ 0.000000] pkmap : 0xff000000 - 0xff200000 (2048 kB)
[ 0.000000] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB)
[ 0.000000] .init : 0xc097d000 - 0xc09f1000 ( 464 kB)
[ 0.000000] .data : 0xc069bd42 - 0xc097c008 (2944 kB)
[ 0.000000] .text : 0xc0200000 - 0xc069bd42 (4719 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1600.042 MHz processor.
[ 0.000117] Console: colour dummy device 80x25
[ 0.000122] console [tty0] enabled
[ 0.000344] hpet clockevent registered
[ 0.000349] HPET: 3 timers in total, 0 timers will be used for per-cpu
timer
[ 0.000356] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3200.08 BogoMIPS (lpj=1600042)
[ 0.021203] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI,
All Rights Reserved
[ 0.021300] Security Framework initialized
[ 0.021325] AppArmor: AppArmor initialized
[ 0.021355] Mount-cache hash table entries: 512
[ 0.021558] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.021563] CPU: L2 cache: 1024K
[ 0.021566] CPU: Physical Processor ID: 0
[ 0.021569] CPU: Processor Core ID: 0
[ 0.021574] mce: CPU supports 6 MCE banks
[ 0.021585] CPU0: Thermal monitoring enabled (TM2)
[ 0.021590] using mwait in idle threads.
[ 0.021598] Performance Counters: Core2 events, Intel PMU driver.
[ 0.021606] ... version: 2
[ 0.021608] ... bit width: 40
[ 0.021610] ... generic counters: 2
[ 0.021613] ... value mask: 000000ffffffffff
[ 0.021616] ... max period: 000000007fffffff
[ 0.021618] ... fixed-purpose counters: 3
[ 0.021621] ... counter mask: 0000000700000003
[ 0.021628] Checking 'hlt' instruction... OK.
[ 0.026536] ACPI: Core revision 20090521
[ 0.039222] Mapping cpu 0 to node 0
[ 0.039401] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.049737] CPU0: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz stepping
0d
[ 0.049992] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Mapping cpu 1 to node 0
[ 0.000999] Calibrating delay using timer specific routine.. 3199.78
BogoMIPS (lpj=1599893)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 1024K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] mce: CPU supports 6 MCE banks
[ 0.000999] CPU1: Thermal monitoring enabled (TM2)
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
[ 0.121778] CPU1: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz stepping
0d
[ 0.121794] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.122020] Brought up 2 CPUs
[ 0.122020] Total of 2 processors activated (6399.87 BogoMIPS).
[ 0.122092] CPU0 attaching sched-domain:
[ 0.122095] domain 0: span 0-1 level MC
[ 0.122099] groups: 0 1
[ 0.122106] domain 1: span 0-1 level NODE
[ 0.122110] groups: 0-1
[ 0.122117] CPU1 attaching sched-domain:
[ 0.122120] domain 0: span 0-1 level MC
[ 0.122124] groups: 1 0
[ 0.122130] domain 1: span 0-1 level NODE
[ 0.122133] groups: 0-1
[ 0.125059] devtmpfs: initialized
[ 0.126024] Booting paravirtualized kernel on bare hardware
[ 0.126264] regulator: core version 0.5
[ 0.126264] Time: 13:57:42 Date: 12/30/09
[ 0.126264] NET: Registered protocol family 16
[ 0.126324] ACPI: bus type pci registered
[ 0.126414] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.126414] PCI: Not using MMCONFIG.
[ 0.126414] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[ 0.126414] PCI: Using configuration type 1 for base access
[ 0.128088] bio: create slab <bio-0> at 0
[ 0.130366] ACPI: EC: Look up EC in DSDT
[ 0.144101] ACPI: Interpreter enabled
[ 0.144112] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.144155] ACPI: Using IOAPIC for interrupt routing
[ 0.144233] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.149739] PCI: MCFG area at f0000000 reserved in ACPI motherboard
resources
[ 0.149743] PCI: Using MMCONFIG for extended config space
[ 0.161377] ACPI Warning: Incorrect checksum in table [OEMB] - 99, should
be 8C 20090521 tbutils-246
[ 0.161619] ACPI: No dock devices found.
[ 0.161777] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.161913] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfd00000-0xdfd7ffff]
[ 0.161921] pci 0000:00:02.0: reg 14 io port: [0x8800-0x8807]
[ 0.161928] pci 0000:00:02.0: reg 18 32bit mmio: [0xe0000000-0xefffffff]
[ 0.161935] pci 0000:00:02.0: reg 1c 32bit mmio: [0xdfd80000-0xdfdbffff]
[ 0.162043] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdfdf8000-0xdfdfbfff]
[ 0.162096] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.162102] pci 0000:00:1b.0: PME# disabled
[ 0.162177] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.162183] pci 0000:00:1c.0: PME# disabled
[ 0.162258] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.162264] pci 0000:00:1c.1: PME# disabled
[ 0.162327] pci 0000:00:1d.0: reg 20 io port: [0x9000-0x901f]
[ 0.162386] pci 0000:00:1d.1: reg 20 io port: [0x9400-0x941f]
[ 0.162447] pci 0000:00:1d.2: reg 20 io port: [0x9800-0x981f]
[ 0.162509] pci 0000:00:1d.3: reg 20 io port: [0xa000-0xa01f]
[ 0.162575] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdfdffc00-0xdfdfffff]
[ 0.162636] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.162642] pci 0000:00:1d.7: PME# disabled
[ 0.162786] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
ACPI/GPIO/TCO
[ 0.162792] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.162799] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290
(mask 0007)
[ 0.162849] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.162858] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.162866] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.162875] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.162884] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.162935] pci 0000:00:1f.2: reg 10 io port: [0xb800-0xb807]
[ 0.162944] pci 0000:00:1f.2: reg 14 io port: [0xb400-0xb403]
[ 0.162952] pci 0000:00:1f.2: reg 18 io port: [0xb000-0xb007]
[ 0.162960] pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803]
[ 0.162968] pci 0000:00:1f.2: reg 20 io port: [0xa400-0xa40f]
[ 0.163004] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.163009] pci 0000:00:1f.2: PME# disabled
[ 0.163063] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.163144] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff]
[ 0.163215] pci 0000:02:00.0: reg 10 64bit mmio: [0xdffc0000-0xdfffffff]
[ 0.163253] pci 0000:02:00.0: reg 30 32bit mmio: [0xdffa0000-0xdffbffff]
[ 0.163293] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.163300] pci 0000:02:00.0: PME# disabled
[ 0.163334] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.163416] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
[ 0.163421] pci 0000:00:1c.1: bridge 32bit mmio: [0xdff00000-0xdfffffff]
[ 0.163455] pci 0000:01:00.0: reg 10 32bit mmio: [0xdfeffc00-0xdfeffdff]
[ 0.163549] pci 0000:00:1e.0: transparent bridge
[ 0.163555] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.163560] pci 0000:00:1e.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.163588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.163816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.163948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.164048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.169401] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14
15)
[ 0.169579] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14
15)
[ 0.169754] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14
15)
[ 0.169929] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14
15)
[ 0.170111] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14
15)
[ 0.170287] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.170464] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.170640] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14
15)
[ 0.170942] SCSI subsystem initialized
[ 0.171989] libata version 3.00 loaded.
[ 0.172051] usbcore: registered new interface driver usbfs
[ 0.172051] usbcore: registered new interface driver hub
[ 0.172990] usbcore: registered new device driver usb
[ 0.173042] PCI: Using ACPI for IRQ routing
[ 0.174997] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.175008] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.180535] AppArmor: AppArmor Filesystem Enabled
[ 0.182857] pnp: PnP ACPI init
[ 0.182882] ACPI: bus type pnp registered
[ 0.189782] pnp: PnP ACPI: found 18 devices
[ 0.189785] ACPI: ACPI bus type pnp unregistered
[ 0.189802] system 00:01: iomem range 0xfed13000-0xfed19fff has been
reserved
[ 0.189815] system 00:08: ioport range 0x290-0x297 has been reserved
[ 0.189824] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.189829] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.189833] system 00:09: ioport range 0x480-0x4bf has been reserved
[ 0.189837] system 00:09: ioport range 0x900-0x91f has been reserved
[ 0.189848] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.189853] system 00:09: iomem range 0xfed20000-0xfed8ffff has been
reserved
[ 0.189858] system 00:09: iomem range 0xffb00000-0xffbfffff has been
reserved
[ 0.189863] system 00:09: iomem range 0xfff00000-0xffffffff could not be
reserved
[ 0.189873] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.189878] system 00:0c: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.189888] system 00:0f: iomem range 0xffc00000-0xfff7ffff has been
reserved
[ 0.189896] system 00:10: iomem range 0xf0000000-0xf3ffffff has been
reserved
[ 0.189905] system 00:11: iomem range 0x0-0x9ffff could not be reserved
[ 0.189910] system 00:11: iomem range 0xc0000-0xdffff could not be reserved
[ 0.189914] system 00:11: iomem range 0xe0000-0xfffff could not be reserved
[ 0.189919] system 00:11: iomem range 0x100000-0x3f7fffff could not be
reserved
[ 0.224864] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.224870] pci 0000:00:1c.0: IO window: 0xe000-0xefff
[ 0.224876] pci 0000:00:1c.0: MEM window: disabled
[ 0.224881] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.224887] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.224892] pci 0000:00:1c.1: IO window: 0xd000-0xdfff
[ 0.224899] pci 0000:00:1c.1: MEM window: 0xdff00000-0xdfffffff
[ 0.224904] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.224910] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.224915] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.224922] pci 0000:00:1e.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.224927] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.224944] alloc irq_desc for 16 on node 0
[ 0.224947] alloc kstat_irqs on node 0
[ 0.224955] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.224963] pci 0000:00:1c.0: setting latency timer to 64
[ 0.224972] alloc irq_desc for 17 on node 0
[ 0.224975] alloc kstat_irqs on node 0
[ 0.224980] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.224986] pci 0000:00:1c.1: setting latency timer to 64
[ 0.224995] pci 0000:00:1e.0: setting latency timer to 64
[ 0.225001] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.225006] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.225010] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.225013] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.225017] pci_bus 0000:02: resource 1 mem: [0xdff00000-0xdfffffff]
[ 0.225021] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.225025] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 0.225029] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.225033] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.225135] NET: Registered protocol family 2
[ 0.225295] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.225782] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.226331] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.226679] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.226683] TCP reno registered
[ 0.226947] NET: Registered protocol family 1
[ 0.227043] Unpacking initramfs...
[ 0.418647] Freeing initrd memory: 6423k freed
[ 0.422727] Scanning for low memory corruption every 60 seconds
[ 0.423009] audit: initializing netlink socket (disabled)
[ 0.423032] type=2000 audit(1262181462.422:1): initialized
[ 0.427158] highmem bounce pool size: 64 pages
[ 0.427166] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.427321] VFS: Disk quotas dquot_6.5.2
[ 0.427383] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.427575] msgmni has been set to 430
[ 0.427718] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.427723] io scheduler noop registered
[ 0.427726] io scheduler anticipatory registered
[ 0.427729] io scheduler deadline registered
[ 0.427754] io scheduler cfq registered (default)
[ 0.427874] pci 0000:00:02.0: Boot video device
[ 0.428156] alloc irq_desc for 24 on node 0
[ 0.428160] alloc kstat_irqs on node 0
[ 0.428173] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.428184] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.428382] alloc irq_desc for 25 on node 0
[ 0.428386] alloc kstat_irqs on node 0
[ 0.428396] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.428406] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.428533] pci-stub: invalid id string ""
[ 0.428703] vesafb: framebuffer at 0xe0000000, mapped to 0xf7880000, using
5120k, total 7872k
[ 0.428707] vesafb: mode is 1280x1024x16, linelength=2560, pages=2
[ 0.428710] vesafb: scrolling: redraw
[ 0.428714] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.428962] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.450815] bootsplash: silentjpeg size 130564 bytes
[ 0.483105] bootsplash: ...found (1280x1024, 29083 bytes, v3).
[ 0.500834] Switched to high resolution mode on CPU 1
[ 0.500975] Switched to high resolution mode on CPU 0
[ 0.557334] Console: switching to colour frame buffer device 156x60
[ 0.630990] fb0: VESA VGA frame buffer device
[ 0.633266] Non-volatile memory driver v1.3
[ 0.633270] Linux agpgart interface v0.103
[ 0.633311] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.633421] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.634168] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.634490] ata_piix 0000:00:1f.1: version 2.13
[ 0.634510] alloc irq_desc for 22 on node 0
[ 0.634513] alloc kstat_irqs on node 0
[ 0.634523] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 0.634575] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.634654] scsi0 : ata_piix
[ 0.634785] scsi1 : ata_piix
[ 0.637040] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.637045] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.637282] alloc irq_desc for 23 on node 0
[ 0.637285] alloc kstat_irqs on node 0
[ 0.637293] ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ
23
[ 0.637300] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.637350] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.637411] scsi2 : ata_piix
[ 0.637489] scsi3 : ata_piix
[ 0.639363] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq
23
[ 0.639367] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq
23
[ 0.639459] Fixed MDIO Bus: probed
[ 0.639468] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.639618] alloc irq_desc for 20 on node 0
[ 0.639621] alloc kstat_irqs on node 0
[ 0.639629] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 0.639648] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.639652] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.639691] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 0.643608] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.643616] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.643634] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdfdffc00
[ 0.653023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.653074] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.653079] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.653084] usb usb1: Product: EHCI Host Controller
[ 0.653088] usb usb1: Manufacturer: Linux 2.6.31.5-0.1-desktop ehci_hcd
[ 0.653092] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.653218] usb usb1: configuration #1 chosen from 1 choice
[ 0.653259] hub 1-0:1.0: USB hub found
[ 0.653269] hub 1-0:1.0: 8 ports detected
[ 0.653368] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.653390] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.654167] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 0.654178] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.654184] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.654200] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 0.654230] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00009000
[ 0.654286] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.654291] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.654296] usb usb2: Product: UHCI Host Controller
[ 0.654300] usb usb2: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
[ 0.654305] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.654411] usb usb2: configuration #1 chosen from 1 choice
[ 0.654449] hub 2-0:1.0: USB hub found
[ 0.654461] hub 2-0:1.0: 2 ports detected
[ 0.655159] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 0.655167] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.655172] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.655184] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 0.655220] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00009400
[ 0.655261] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.655265] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.655269] usb usb3: Product: UHCI Host Controller
[ 0.655272] usb usb3: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
[ 0.655275] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.655364] usb usb3: configuration #1 chosen from 1 choice
[ 0.655401] hub 3-0:1.0: USB hub found
[ 0.655410] hub 3-0:1.0: 2 ports detected
[ 0.656163] alloc irq_desc for 18 on node 0
[ 0.656167] alloc kstat_irqs on node 0
[ 0.656177] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 0.656187] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.656193] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.656208] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 0.656250] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009800
[ 0.656305] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.656310] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.656314] usb usb4: Product: UHCI Host Controller
[ 0.656319] usb usb4: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
[ 0.656323] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.656427] usb usb4: configuration #1 chosen from 1 choice
[ 0.656465] hub 4-0:1.0: USB hub found
[ 0.656474] hub 4-0:1.0: 2 ports detected
[ 0.657158] alloc irq_desc for 19 on node 0
[ 0.657161] alloc kstat_irqs on node 0
[ 0.657168] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ
19
[ 0.657177] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.657181] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.657195] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 5
[ 0.657231] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000a000
[ 0.657272] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.657275] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.657279] usb usb5: Product: UHCI Host Controller
[ 0.657282] usb usb5: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
[ 0.657285] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.657380] usb usb5: configuration #1 chosen from 1 choice
[ 0.657417] hub 5-0:1.0: USB hub found
[ 0.657426] hub 5-0:1.0: 2 ports detected
[ 0.657511] Initializing USB Mass Storage driver...
[ 0.657555] usbcore: registered new interface driver usb-storage
[ 0.657559] USB Mass Storage support registered.
[ 0.657598] usbcore: registered new interface driver libusual
[ 0.657616] usbcore: registered new interface driver ums-alauda
[ 0.657632] usbcore: registered new interface driver ums-cypress
[ 0.657650] usbcore: registered new interface driver ums-datafab
[ 0.657667] usbcore: registered new interface driver ums-freecom
[ 0.657684] usbcore: registered new interface driver ums-isd200
[ 0.657700] usbcore: registered new interface driver ums-jumpshot
[ 0.657717] usbcore: registered new interface driver ums-karma
[ 0.657736] usbcore: registered new interface driver ums-onetouch
[ 0.657754] usbcore: registered new interface driver ums-sddr09
[ 0.657772] usbcore: registered new interface driver ums-sddr55
[ 0.657789] usbcore: registered new interface driver ums-usbat
[ 0.657867] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.657870] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.658306] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.658393] mice: PS/2 mouse device common for all mice
[ 0.658520] rtc_cmos 00:03: RTC can wake from S4
[ 0.658574] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.658602] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.658624] cpuidle: using governor ladder
[ 0.658627] cpuidle: using governor menu
[ 0.659011] usbcore: registered new interface driver hiddev
[ 0.659032] usbcore: registered new interface driver usbhid
[ 0.659036] usbhid: v2.6:USB HID core driver
[ 0.745414] TCP cubic registered
[ 0.745498] NET: Registered protocol family 10
[ 0.746179] lo: Disabled Privacy Extensions
[ 0.746693] lib80211: common routines for IEEE802.11 drivers
[ 0.746696] lib80211_crypt: registered algorithm 'NULL'
[ 0.746716] Using IPI No-Shortcut mode
[ 0.746832] PM: Checking image partition /dev/disk/by-id/ata-
Hitachi_HDS721680PLAT80_PV6805Z8S9RMEN-part3
[ 0.820784] ata1: clearing spurious IRQ
[ 0.823434] ata1: clearing spurious IRQ
[ 0.826546] ata1.00: ATA-7: Hitachi HDS721680PLAT80, P21OA8BA, max UDMA/133
[ 0.826552] ata1.00: 156301488 sectors, multi 16: LBA48
[ 0.826615] ata1.01: ATAPI: ASUS DRW-1608P3S, 1.06, max UDMA/66
[ 0.826754] ata1: clearing spurious IRQ
[ 0.829130] ata1: clearing spurious IRQ
[ 0.832459] ata1.00: configured for UDMA/100
[ 0.832534] ata1: clearing spurious IRQ
[ 0.835130] ata1: clearing spurious IRQ
[ 0.838289] ata1.01: configured for UDMA/66
[ 0.844861] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72168 P21O
PQ: 0 ANSI: 5
[ 0.851506] scsi 0:0:1:0: CD-ROM ASUS DRW-1608P3S 1.06
PQ: 0 ANSI: 5
[ 0.851674] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0
GB/74.5 GiB)
[ 0.851743] sd 0:0:0:0: [sda] Write Protect is off
[ 0.851747] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.851780] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 0.851959] sda: sda1 sda2 sda3
[ 0.886582] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.886593] PM: Resume from disk failed.
[ 0.886613] registered taskstats version 1
[ 0.886773] Magic number: 5:114:990
[ 0.886854] rtc_cmos 00:03: setting system clock to 2009-12-30 13:57:43 UTC
(1262181463)
[ 0.886983] Freeing unused kernel memory: 464k freed
[ 0.887227] Write protecting the kernel text: 4720k
[ 0.887396] Write protecting the kernel read-only data: 2704k
[ 0.961082] Uniform Multi-Platform E-IDE driver
[ 0.972919] ACPI: SSDT 3f7ae0c0 001D2 (v01 AMI CPU1PM 00000001 INTL
20051117)
[ 0.973526] processor LNXCPU:00: registered as cooling_device0
[ 0.973532] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.974021] ACPI: SSDT 3f7ae2a0 00143 (v01 AMI CPU2PM 00000001 INTL
20051117)
[ 0.974571] processor LNXCPU:01: registered as cooling_device1
[ 0.974577] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.984982] udev: starting version 146
[ 1.108097] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 1.484143] usb 1-3: New USB device found, idVendor=058f, idProduct=6387
[ 1.484149] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.484153] usb 1-3: Product: USB2.0
[ 1.484156] usb 1-3: Manufacturer: Generic
[ 1.484159] usb 1-3: SerialNumber: 73BDB33F
[ 1.484312] usb 1-3: configuration #1 chosen from 1 choice
[ 1.486908] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.489421] usb-storage: device found at 4
[ 1.489425] usb-storage: waiting for device to settle before scanning
[ 1.497726] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 1.497735] PM: Basic memory bitmaps created
[ 1.509690] PM: Basic memory bitmaps freed
[ 1.520536] PM: Starting manual resume from disk
[ 1.520541] PM: Resume from partition 8:3
[ 1.520544] PM: Checking hibernation image.
[ 1.520748] PM: Resume from disk failed.
[ 1.591028] usb 1-4: new high speed USB device using ehci_hcd and address 5
[ 1.620960] EXT4-fs (sda2): barriers enabled
[ 1.644501] kjournald2 starting: pid 236, dev sda2:8, commit interval 5
seconds
[ 1.644856] EXT4-fs (sda2): internal journal on sda2:8
[ 1.644864] EXT4-fs (sda2): delayed allocation enabled
[ 1.644871] EXT4-fs: file extents enabled
[ 1.646560] EXT4-fs: mballoc enabled
[ 1.646582] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 1.705886] usb 1-4: New USB device found, idVendor=0930, idProduct=6540
[ 1.705891] usb 1-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.705895] usb 1-4: Product: TransMemory
[ 1.705898] usb 1-4: Manufacturer: TOSHIBA
[ 1.705901] usb 1-4: SerialNumber: 0640377110910964
[ 1.706037] usb 1-4: configuration #1 chosen from 1 choice
[ 1.706496] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1.706752] usb-storage: device found at 5
[ 1.706756] usb-storage: waiting for device to settle before scanning
[ 1.912033] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 2.090237] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[ 2.090243] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.090380] usb 2-1: configuration #1 chosen from 1 choice
[ 2.300037] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 2.471213] usb 2-2: New USB device found, idVendor=045e, idProduct=009d
[ 2.471220] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.471226] usb 2-2: Product: Microsoft Wireless Optical Desktop® 2.10
[ 2.471231] usb 2-2: Manufacturer: Microsoft
[ 2.471370] usb 2-2: configuration #1 chosen from 1 choice
[ 2.488607] input: Microsoft Microsoft Wireless Optical Desktop® 2.10 as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input0
[ 2.488715] microsoft 0003:045E:009D.0001: input,hidraw0: USB HID v1.11
Keyboard [Microsoft Microsoft Wireless Optical Desktop® 2.10] on
usb-0000:00:1d.0-2/input0
[ 2.489899] scsi 4:0:0:0: Direct-Access Generic USB2.0 8.07
PQ: 0 ANSI: 2
[ 2.491489] sd 4:0:0:0: [sdb] 2057216 512-byte logical blocks: (1.05
GB/1004 MiB)
[ 2.491984] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.491989] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2.491994] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2.492386] usb-storage: device scan complete
[ 2.494110] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2.494127] sdb:
[ 2.578864] input: Microsoft Microsoft Wireless Optical Desktop® 2.10 as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input1
[ 2.579015] microsoft 0003:045E:009D.0002: input,hidraw1: USB HID v1.11
Mouse [Microsoft Microsoft Wireless Optical Desktop® 2.10] on
usb-0000:00:1d.0-2/input1
[ 2.706640] scsi 5:0:0:0: Direct-Access TOSHIBA TransMemory 6.50
PQ: 0 ANSI: 0 CCS
[ 2.707486] sd 5:0:0:0: [sdc] 3903487 512-byte logical blocks: (1.99
GB/1.86 GiB)
[ 2.707978] sd 5:0:0:0: [sdc] Write Protect is off
[ 2.707984] sd 5:0:0:0: [sdc] Mode Sense: 45 00 00 08
[ 2.707989] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 2.709256] usb-storage: device scan complete
[ 2.709731] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 2.709750] sdc: sdc1
[ 2.712104] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 2.712118] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 2.714479] sdb1
[ 2.721729] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2.721746] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3.263568] preloadtrace: systemtap: 0.9.9/0.142, base: f7f8f000, memory:
34052+77432+22160+13600 data+text+ctx+net, probes: 34
[ 4.827763] udev: starting version 146
[ 4.868857] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[ 4.869370] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 4.871811] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 4.877910] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 4.877915] Copyright (c) 2007 Atheros Corporation.
[ 4.878039] atl2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.878053] atl2 0000:02:00.0: setting latency timer to 64
[ 4.892080] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.892166] ACPI: Power Button [PWRF]
[ 4.892274] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 4.892315] ACPI: Power Button [PWRB]
[ 5.021149] Floppy drive(s): fd0 is 1.44M
[ 5.035325] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.035371] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 5.035413] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 5.035455] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 5.035829] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.037190] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ
19
[ 5.037225] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.039571] FDC 0 is a post-1991 82077
[ 5.053386] intel_rng: FWH not detected
[ 5.057628] parport_pc 00:07: reported by Plug and Play ACPI
[ 5.057739] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 5.070800] Bluetooth: Core ver 2.15
[ 5.073605] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2
cdda tray
[ 5.073612] Uniform CD-ROM driver Revision: 3.20
[ 5.073765] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 5.073853] NET: Registered protocol family 31
[ 5.073856] Bluetooth: HCI device and connection manager initialized
[ 5.073860] Bluetooth: HCI socket layer initialized
[ 5.083315] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 5.083444] usbcore: registered new interface driver btusb
[ 5.143042] iTCO_vendor_support: vendor-support=0
[ 5.144640] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 5.144763] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2,
TCOBASE=0x0860)
[ 5.144843] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.163075] saa7146: register extension 'budget_ci dvb'.
[ 5.165599] ppdev: user-space parallel port driver
[ 5.167174] budget_ci dvb 0000:01:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 5.167229] IRQ 17/: IRQF_DISABLED is not guaranteed on shared IRQs
[ 5.167244] saa7146: found saa7146 @ mem f881ec00 (revision 1, irq 17)
(0x13c2,0x1019).
[ 5.167254] saa7146 (0): dma buffer size 192512
[ 5.167258] DVB: registering new adapter (TT-Budget S2-3200 PCI)
[ 5.186103] adapter has MAC addr = 00:d0:5c:64:a7:3a
[ 5.186913] input: Budget-CI dvb ir receiver saa7146 (0) as
/devices/pci0000:00/0000:00:1e.0/0000:01:00.0/input/input5
[ 8.703883] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 8.709491] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 23 (level, low) ->
IRQ 23
[ 9.831371] stb0899_attach: Attaching STB0899
[ 9.848076] stb6100_attach: Attaching STB6100
[ 9.872406] LNBx2x attached on addr=8
[ 9.872413] DVB: registering adapter 0 frontend 0 (STB0899
Multistandard)...
[ 10.092329] Adding 10485496k swap on /dev/sda3. Priority:-1 extents:1
across:10485496k
[ 10.576226] device-mapper: uevent: version 1.0.3
[ 10.576425] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@redhat.com
[ 10.777448] loop: module loaded
[ 11.011001] fuse init (API version 7.12)
[ 12.618662] type=1505 audit(1262181475.231:2): operation="profile_load"
pid=1047 name=/bin/ping
[ 12.690796] type=1505 audit(1262181475.303:3): operation="profile_load"
pid=1048 name=/sbin/klogd
[ 12.795113] type=1505 audit(1262181475.408:4): operation="profile_load"
pid=1049 name=/sbin/syslog-ng
[ 12.897724] type=1505 audit(1262181475.510:5): operation="profile_load"
pid=1050 name=/sbin/syslogd
[ 13.000219] type=1505 audit(1262181475.613:6): operation="profile_load"
pid=1051 name=/usr/sbin/avahi-daemon
[ 13.105214] type=1505 audit(1262181475.718:7): operation="profile_load"
pid=1052 name=/usr/sbin/identd
[ 13.200792] type=1505 audit(1262181475.813:8): operation="profile_load"
pid=1053 name=/usr/sbin/mdnsd
[ 13.307549] type=1505 audit(1262181475.920:9): operation="profile_load"
pid=1054 name=/usr/sbin/nscd
[ 13.461335] type=1505 audit(1262181476.074:10): operation="profile_load"
pid=1055 name=/usr/sbin/ntpd
[ 13.566301] type=1505 audit(1262181476.179:11): operation="profile_load"
pid=1056 name=/usr/sbin/traceroute
[ 15.367161] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.457898] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.493746] nf_conntrack version 0.5.0 (15833 buckets, 63332 max)
[ 15.493891] CONFIG_NF_CT_ACCT is deprecated and will be removed soon.
Please use
[ 15.493900] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack
module option or
[ 15.493907] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 18.005668] powernow: This module only works with AMD K7 CPUs
[ 18.700370] [drm] Initialized drm 1.1.0 20060810
[ 18.756021] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.756035] pci 0000:00:02.0: setting latency timer to 64
[ 18.759542] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor
0
[ 19.257591] alloc irq_desc for 26 on node 0
[ 19.257598] alloc kstat_irqs on node 0
[ 19.257639] atl2 0000:02:00.0: irq 26 for MSI/MSI-X
[ 19.258044] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.462361] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 19.462673] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.613600] NET: Registered protocol family 17
[ 28.104213] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[ 28.595268] Bluetooth: L2CAP ver 2.13
[ 28.595279] Bluetooth: L2CAP socket layer initialized
[ 28.892954] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.892966] Bluetooth: BNEP filters: protocol multicast
[ 29.484008] eth0: no IPv6 routers present
[ 30.028120] Bridge firewalling registered
[ 30.324679] Bluetooth: SCO (Voice Link) ver 0.6
[ 30.324691] Bluetooth: SCO socket layer initialized
[ 30.624625] Bluetooth: RFCOMM TTY layer initialized
[ 30.624641] Bluetooth: RFCOMM socket layer initialized
[ 30.624649] Bluetooth: RFCOMM ver 1.11
[ 30.903840] bootsplash: status on console 0 changed to on
[ 34.647778] CPU0 attaching NULL sched-domain.
[ 34.647787] CPU1 attaching NULL sched-domain.
[ 34.651139] CPU0 attaching sched-domain:
[ 34.651146] domain 0: span 0-1 level MC
[ 34.651151] groups: 0 1
[ 34.651160] domain 1: span 0-1 level NODE
[ 34.651165] groups: 0-1
[ 34.651174] CPU1 attaching sched-domain:
[ 34.651178] domain 0: span 0-1 level MC
[ 34.651183] groups: 1 0
[ 34.651191] domain 1: span 0-1 level NODE
[ 34.651196] groups: 0-1
[ 193.214449] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10474 DF PROTO=TCP SPT=45217 DPT=80
WINDOW=1554 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFE5EDEA072888C)
[ 198.934057] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=49261 DF PROTO=TCP SPT=45220 DPT=80
WINDOW=544 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFE7536A0728986)
[ 199.501040] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=59289 DF PROTO=TCP SPT=45221 DPT=80
WINDOW=544 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFE776DA0728986)
[ 200.580046] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=37629 DF PROTO=TCP SPT=45215 DPT=80
WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFE7BA4A072888C)
[ 201.850057] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=63.245.209.93
LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=11378 DF PROTO=TCP SPT=60031 DPT=80
WINDOW=6948 RES=0x00 ACK FIN URGP=0
[ 214.423044] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=30672 DF PROTO=TCP SPT=45218 DPT=80
WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFEB1B7A072888C)
[ 244.600050] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=212.58.226.75
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=16315 DF PROTO=TCP SPT=37020 DPT=80
WINDOW=997 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFF2798437A8FC9)
[ 248.815294] DVB: adapter 0 frontend 0 symbol rate 4800000 out of range
(5000000..45000000)
[ 249.024289] DVB: adapter 0 frontend 0 symbol rate 4800000 out of range
(5000000..45000000)
[ 259.390044] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10475 DF PROTO=TCP SPT=45217 DPT=80
WINDOW=1554 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFF615EA072888C)
[ 274.180042] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=37630 DF PROTO=TCP SPT=45215 DPT=80
WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFF9B24A072888C)
[ 301.975042] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=30673 DF PROTO=TCP SPT=45218 DPT=80
WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A000007B7A072888C)
[ 313.450051] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=34625 DF PROTO=TCP SPT=45206 DPT=80
WINDOW=1454 RES=0x00 ACK FIN URGP=0 OPT (0101080A0000348AA0728A81)
linux-o2b8:~ #
linux-o2b8:~ # lsmod
Module Size Used by
ip6t_LOG 6468 6
xt_tcpudp 3136 2
xt_pkttype 1632 3
xt_physdev 2384 2
ipt_LOG 6276 6
xt_limit 2692 12
rfcomm 75312 4
sco 20004 2
bridge 63476 1
stp 2532 1 bridge
llc 7020 2 bridge,stp
bnep 18624 2
l2cap 43168 16 rfcomm,bnep
snd_pcm_oss 51616 0
snd_mixer_oss 19072 1 snd_pcm_oss
snd_seq 64752 0
snd_seq_device 8620 1 snd_seq
edd 10472 0
af_packet 23424 0
i915 248968 1
drm 184896 2 i915
i2c_algo_bit 6884 1 i915
video 24600 1 i915
cpufreq_conservative 8396 0
cpufreq_userspace 3332 0
cpufreq_powersave 1568 0
acpi_cpufreq 9452 0
speedstep_lib 5092 0
ip6t_REJECT 5472 3
nf_conntrack_ipv6 22036 4
ip6table_raw 3008 1
xt_NOTRACK 1632 4
ipt_REJECT 3168 3
xt_state 2208 8
iptable_raw 2848 1
iptable_filter 3616 1
ip6table_mangle 4160 0
nf_conntrack_netbios_ns 2560 0
nf_conntrack_ipv4 11688 4
nf_conntrack 85660 5
nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4
nf_defrag_ipv4 2112 1 nf_conntrack_ipv4
ip_tables 13392 2 iptable_raw,iptable_filter
ip6table_filter 3616 1
ip6_tables 14832 4
ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter
x_tables 19524 12
ip6t_LOG,xt_tcpudp,xt_pkttype,xt_physdev,ipt_LOG,xt_limit,ip6t_REJECT,xt_NOTRACK,ipt_REJECT,xt_state,ip_tables,ip6_tables
fuse 74268 3
loop 17228 0
dm_mod 84804 0
lnbp21 2816 1
stb6100 7780 1
stb0899 37252 1
snd_hda_codec_realtek 233604 1
ppdev 10276 0
budget_ci 25240 0
budget_core 10628 1 budget_ci
iTCO_wdt 12164 0
iTCO_vendor_support 3876 1 iTCO_wdt
dvb_core 98692 2 budget_ci,budget_core
saa7146 19880 2 budget_ci,budget_core
ttpci_eeprom 2144 1 budget_core
btusb 16916 2
bluetooth 103524 9 rfcomm,sco,bnep,l2cap,btusb
parport_pc 40356 0
serio_raw 6276 0
sr_mod 17572 0
cdrom 40768 1 sr_mod
ir_common 49284 1 budget_ci
pcspkr 2784 0
sg 32884 0
joydev 11232 0
i2c_i801 12788 0
parport 39948 2 ppdev,parport_pc
floppy 61220 0
rfkill 22772 1 bluetooth
snd_hda_intel 31584 2
snd_hda_codec 94688 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 8708 1 snd_hda_codec
snd_pcm 96324 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 25960 2 snd_seq,snd_pcm
snd 75236 14
snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
asus_atk0110 13888 0
button 6608 0
atl2 30264 0
snd_page_alloc 10600 2 snd_hda_intel,snd_pcm
intel_agp 31012 1
ext4 359524 1
jbd2 95584 1 ext4
crc16 1952 1 ext4
fan 5028 0
processor 50576 1 acpi_cpufreq
ide_pci_generic 4036 0
piix 6760 0
ide_core 122572 2 ide_pci_generic,piix
ata_generic 4836 0
thermal 21084 0
thermal_sys 18344 4 video,fan,processor,thermal
linux-o2b8:~ #
linux-o2b8:~ # lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller
Hub [8086:2770] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ
Integrated Graphics Controller [8086:2772] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [8086:27d0] (rev 01)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 [8086:27d2] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge [8086:27b8] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family)
SATA IDE Controller [8086:27c0] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller
[8086:27da] (rev 01)
01:00.0 Multimedia controller [0480]: Philips Semiconductors SAA7146
[1131:7146] (rev 01)
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L2 100 Mbit
Ethernet Adapter [1969:2048] (rev a0)
linux-o2b8:~ #
I also want to communicate, I tried installing the v4l-dvb drivers and do not
work. The computer does not start, if you take the card starts. If way to get
a log of the boot of the computer that can display the error, even if the
interest is mine, I will be the provision. Thanks
reply other threads:[~2010-01-02 11:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201001021121.03197.armbaia@gmail.com \
--to=armbaia@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox