* gspca_sunplus problem: more than one device is created
@ 2010-01-10 16:38 Németh Márton
2010-01-10 17:11 ` leandro Costantino
2010-01-10 19:35 ` Jean-Francois Moine
0 siblings, 2 replies; 7+ messages in thread
From: Németh Márton @ 2010-01-10 16:38 UTC (permalink / raw)
To: Jean-Francois Moine; +Cc: V4L Mailing List
Hi,
I tried the gspca_sunplus driver from http://linuxtv.org/hg/~jfrancois/gspca/
rev 13915 on top of Linux kernel 2.6.32. When I plug the Trust 610 LCD PowerC@m Zoom
device in webcam mode (0x06d6:0x0031) then two devices are created: /dev/video0
and /dev/video1:
[31636.528184] usb 3-2: new full speed USB device using uhci_hcd and address 5
[31636.740722] usb 3-2: New USB device found, idVendor=06d6, idProduct=0031
[31636.740744] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[31636.740760] usb 3-2: Product: Trust 610 LCD POWERC@M ZOOM
[31636.740772] usb 3-2: Manufacturer: Trust
[31636.744229] usb 3-2: configuration #1 chosen from 1 choice
[31636.747584] gspca: probing 06d6:0031
[31636.760176] gspca: video0 created
[31636.760643] gspca: probing 06d6:0031
[31636.772063] gspca: video1 created
The /dev/video0 is working correctly but the /dev/video1 just causes error:
$ ./svv -d /dev/video1
raw pixfmt: JPEG 464x480
pixfmt: RGB3 464x480
mmap method
VIDIOC_STREAMON error 5, Input/output error
Here is the USB descriptor of the device:
Trust 610 LCD POWERC@M ZOOM
Manufacturer: Trust
Speed: 12Mb/s (full)
USB Version: 1.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 06d6
Product Id: 0031
Revision Number: 1.00
Config Number: 1
Number of Interfaces: 2
Attributes: 80
MaxPower Needed: 500mA
Interface Number: 0
Name: sunplus
Alternate Number: 0
Class: ff(vend.)
Sub Class: 00
Protocol: 00
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 0
Interval: 1ms
Interface Number: 0
Name: sunplus
Alternate Number: 1
Class: ff(vend.)
Sub Class: 00
Protocol: 00
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 128
Interval: 1ms
Interface Number: 0
Name: sunplus
Alternate Number: 2
Class: ff(vend.)
Sub Class: 00
Protocol: 00
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 384
Interval: 1ms
Interface Number: 0
Name: sunplus
Alternate Number: 3
Class: ff(vend.)
Sub Class: 00
Protocol: 00
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 512
Interval: 1ms
Interface Number: 0
Name: sunplus
Alternate Number: 4
Class: ff(vend.)
Sub Class: 00
Protocol: 00
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 640
Interval: 1ms
Interface Number: 0
Name: sunplus
Alternate Number: 5
Class: ff(vend.)
Sub Class: 00
Protocol: 00
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 768
Interval: 1ms
Interface Number: 0
Name: sunplus
Alternate Number: 6
Class: ff(vend.)
Sub Class: 00
Protocol: 00
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 896
Interval: 1ms
Interface Number: 0
Name: sunplus
Alternate Number: 7
Class: ff(vend.)
Sub Class: 00
Protocol: 00
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 1023
Interval: 1ms
Interface Number: 1
Name: sunplus
Alternate Number: 0
Class: ff(vend.)
Sub Class: 00
Protocol: 00
Number of Endpoints: 3
Endpoint Address: 82
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 03
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 84
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 1
Interval: 1ms
Regards,
Márton Németh
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: gspca_sunplus problem: more than one device is created
2010-01-10 16:38 gspca_sunplus problem: more than one device is created Németh Márton
@ 2010-01-10 17:11 ` leandro Costantino
2010-01-10 19:42 ` Németh Márton
2010-01-10 19:35 ` Jean-Francois Moine
1 sibling, 1 reply; 7+ messages in thread
From: leandro Costantino @ 2010-01-10 17:11 UTC (permalink / raw)
To: Németh Márton; +Cc: Jean-Francois Moine, V4L Mailing List
Did that happen with the included version on the kernel?.
The kernel is calling the probe for the isoch and the bulk, i really
dont have a sunplus webcam to test, and ignore the older behavior,
that's why i am asking.
Best Regards
2010/1/10 Németh Márton <nm127@freemail.hu>:
> Hi,
>
> I tried the gspca_sunplus driver from http://linuxtv.org/hg/~jfrancois/gspca/
> rev 13915 on top of Linux kernel 2.6.32. When I plug the Trust 610 LCD PowerC@m Zoom
> device in webcam mode (0x06d6:0x0031) then two devices are created: /dev/video0
> and /dev/video1:
>
> [31636.528184] usb 3-2: new full speed USB device using uhci_hcd and address 5
> [31636.740722] usb 3-2: New USB device found, idVendor=06d6, idProduct=0031
> [31636.740744] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [31636.740760] usb 3-2: Product: Trust 610 LCD POWERC@M ZOOM
> [31636.740772] usb 3-2: Manufacturer: Trust
> [31636.744229] usb 3-2: configuration #1 chosen from 1 choice
> [31636.747584] gspca: probing 06d6:0031
> [31636.760176] gspca: video0 created
> [31636.760643] gspca: probing 06d6:0031
> [31636.772063] gspca: video1 created
>
> The /dev/video0 is working correctly but the /dev/video1 just causes error:
> $ ./svv -d /dev/video1
> raw pixfmt: JPEG 464x480
> pixfmt: RGB3 464x480
> mmap method
> VIDIOC_STREAMON error 5, Input/output error
>
> Here is the USB descriptor of the device:
>
> Trust 610 LCD POWERC@M ZOOM
> Manufacturer: Trust
> Speed: 12Mb/s (full)
> USB Version: 1.00
> Device Class: 00(>ifc )
> Device Subclass: 00
> Device Protocol: 00
> Maximum Default Endpoint Size: 8
> Number of Configurations: 1
> Vendor Id: 06d6
> Product Id: 0031
> Revision Number: 1.00
>
> Config Number: 1
> Number of Interfaces: 2
> Attributes: 80
> MaxPower Needed: 500mA
>
> Interface Number: 0
> Name: sunplus
> Alternate Number: 0
> Class: ff(vend.)
> Sub Class: 00
> Protocol: 00
> Number of Endpoints: 1
>
> Endpoint Address: 81
> Direction: in
> Attribute: 1
> Type: Isoc
> Max Packet Size: 0
> Interval: 1ms
>
> Interface Number: 0
> Name: sunplus
> Alternate Number: 1
> Class: ff(vend.)
> Sub Class: 00
> Protocol: 00
> Number of Endpoints: 1
>
> Endpoint Address: 81
> Direction: in
> Attribute: 1
> Type: Isoc
> Max Packet Size: 128
> Interval: 1ms
>
> Interface Number: 0
> Name: sunplus
> Alternate Number: 2
> Class: ff(vend.)
> Sub Class: 00
> Protocol: 00
> Number of Endpoints: 1
>
> Endpoint Address: 81
> Direction: in
> Attribute: 1
> Type: Isoc
> Max Packet Size: 384
> Interval: 1ms
>
> Interface Number: 0
> Name: sunplus
> Alternate Number: 3
> Class: ff(vend.)
> Sub Class: 00
> Protocol: 00
> Number of Endpoints: 1
>
> Endpoint Address: 81
> Direction: in
> Attribute: 1
> Type: Isoc
> Max Packet Size: 512
> Interval: 1ms
>
> Interface Number: 0
> Name: sunplus
> Alternate Number: 4
> Class: ff(vend.)
> Sub Class: 00
> Protocol: 00
> Number of Endpoints: 1
>
> Endpoint Address: 81
> Direction: in
> Attribute: 1
> Type: Isoc
> Max Packet Size: 640
> Interval: 1ms
>
> Interface Number: 0
> Name: sunplus
> Alternate Number: 5
> Class: ff(vend.)
> Sub Class: 00
> Protocol: 00
> Number of Endpoints: 1
>
> Endpoint Address: 81
> Direction: in
> Attribute: 1
> Type: Isoc
> Max Packet Size: 768
> Interval: 1ms
>
> Interface Number: 0
> Name: sunplus
> Alternate Number: 6
> Class: ff(vend.)
> Sub Class: 00
> Protocol: 00
> Number of Endpoints: 1
>
> Endpoint Address: 81
> Direction: in
> Attribute: 1
> Type: Isoc
> Max Packet Size: 896
> Interval: 1ms
>
> Interface Number: 0
> Name: sunplus
> Alternate Number: 7
> Class: ff(vend.)
> Sub Class: 00
> Protocol: 00
> Number of Endpoints: 1
>
> Endpoint Address: 81
> Direction: in
> Attribute: 1
> Type: Isoc
> Max Packet Size: 1023
> Interval: 1ms
>
> Interface Number: 1
> Name: sunplus
> Alternate Number: 0
> Class: ff(vend.)
> Sub Class: 00
> Protocol: 00
> Number of Endpoints: 3
>
> Endpoint Address: 82
> Direction: in
> Attribute: 2
> Type: Bulk
> Max Packet Size: 64
> Interval: 0ms
>
> Endpoint Address: 03
> Direction: out
> Attribute: 2
> Type: Bulk
> Max Packet Size: 64
> Interval: 0ms
>
> Endpoint Address: 84
> Direction: in
> Attribute: 3
> Type: Int.
> Max Packet Size: 1
> Interval: 1ms
>
> Regards,
>
> Márton Németh
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: gspca_sunplus problem: more than one device is created
2010-01-10 17:11 ` leandro Costantino
@ 2010-01-10 19:42 ` Németh Márton
0 siblings, 0 replies; 7+ messages in thread
From: Németh Márton @ 2010-01-10 19:42 UTC (permalink / raw)
To: leandro Costantino; +Cc: Jean-Francois Moine, V4L Mailing List
leandro Costantino wrote:
> Did that happen with the included version on the kernel?.
> The kernel is calling the probe for the isoch and the bulk, i really
> dont have a sunplus webcam to test, and ignore the older behavior,
> that's why i am asking.
I tested with 2.6.33-rc2 on a Clevo D4J model D410J laptop. There only one
device is created. Not counting the circular locking that version is working
properly:
[ 280.578560] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 281.177675] Linux video capture interface: v2.00
[ 281.229464] gspca: main v2.8.0 registered
[ 281.260399] gspca: probing 06d6:0031
[ 281.286724] gspca: video0 created
[ 281.286909] gspca: probing 06d6:0031
[ 281.286914] gspca: intf != 0
[ 281.295106] usbcore: registered new interface driver sunplus
[ 281.295122] sunplus: registered
[ 581.086743]
[ 581.086753] =======================================================
[ 581.086770] [ INFO: possible circular locking dependency detected ]
[ 581.086783] 2.6.33-rc2 #1
[ 581.086790] -------------------------------------------------------
[ 581.086800] svv/3409 is trying to acquire lock:
[ 581.086811] (sysfs_mutex){+.+.+.}, at: [<c03338e3>] sysfs_get_dirent+0x23/0xe0
[ 581.086846]
[ 581.086849] but task is already holding lock:
[ 581.086858] (&gspca_dev->usb_lock){+.+...}, at: [<f80f7019>] gspca_init_transfer+0x29/0x840 [gspca_main]
[ 581.086888]
[ 581.086891] which lock already depends on the new lock.
[ 581.086895]
[ 581.086903]
[ 581.086905] the existing dependency chain (in reverse order) is:
[ 581.086915]
[ 581.086917] -> #3 (&gspca_dev->usb_lock){+.+...}:
[ 581.086935] [<c01bd1da>] validate_chain+0x12ea/0x1e40
[ 581.086953] [<c01be064>] __lock_acquire+0x334/0x15a0
[ 581.086968] [<c01bf39a>] lock_acquire+0xca/0x220
[ 581.086982] [<c0649d9a>] mutex_lock_interruptible_nested+0xaa/0xa20
[ 581.087002] [<f80f7019>] gspca_init_transfer+0x29/0x840 [gspca_main]
[ 581.087020] [<f80f79ad>] vidioc_streamon+0xfd/0x180 [gspca_main]
[ 581.087037] [<f80e6abc>] __video_do_ioctl+0x29ec/0x71c0 [videodev]
[ 581.087057] [<f80eb36d>] video_ioctl2+0xdd/0x980 [videodev]
[ 581.087074] [<f80e22e7>] v4l2_unlocked_ioctl+0x37/0x70 [videodev]
[ 581.087091] [<c02bd6ed>] vfs_ioctl+0x3d/0x130
[ 581.087109] [<c02bda60>] do_vfs_ioctl+0x80/0xb10
[ 581.087111] [<c02be539>] sys_ioctl+0x49/0xc0
[ 581.087111] [<c010484c>] sysenter_do_call+0x12/0x32
[ 581.087111]
[ 581.087111] -> #2 (&gspca_dev->queue_lock){+.+.+.}:
[ 581.087111] [<c01bd1da>] validate_chain+0x12ea/0x1e40
[ 581.087111] [<c01be064>] __lock_acquire+0x334/0x15a0
[ 581.087111] [<c01bf39a>] lock_acquire+0xca/0x220
[ 581.087111] [<c0649d9a>] mutex_lock_interruptible_nested+0xaa/0xa20
[ 581.087111] [<f80fa4ad>] dev_mmap+0x4d/0x3e0 [gspca_main]
[ 581.087111] [<f80e238a>] v4l2_mmap+0x6a/0x80 [videodev]
[ 581.087111] [<c027b234>] mmap_region+0x7a4/0x890
[ 581.087111] [<c027b8aa>] do_mmap_pgoff+0x58a/0x5c0
[ 581.087111] [<c0267296>] sys_mmap_pgoff+0xf6/0x240
[ 581.087111] [<c010484c>] sysenter_do_call+0x12/0x32
[ 581.087111]
[ 581.087111] -> #1 (&mm->mmap_sem){++++++}:
[ 581.087111] [<c01bd1da>] validate_chain+0x12ea/0x1e40
[ 581.087111] [<c01be064>] __lock_acquire+0x334/0x15a0
[ 581.087111] [<c01bf39a>] lock_acquire+0xca/0x220
[ 581.087111] [<c026ccef>] might_fault+0xdf/0x120
[ 581.087111] [<c0427670>] copy_to_user+0x60/0x1c0
[ 581.087111] [<c02bf0cf>] filldir64+0x17f/0x210
[ 581.087111] [<c03334b4>] sysfs_readdir+0x174/0x320
[ 581.087111] [<c02bf5fc>] vfs_readdir+0xec/0x130
[ 581.087111] [<c02bf6c7>] sys_getdents64+0x87/0x150
[ 581.087111] [<c010484c>] sysenter_do_call+0x12/0x32
[ 581.087111]
[ 581.087111] -> #0 (sysfs_mutex){+.+.+.}:
[ 581.087111] [<c01bdb3a>] validate_chain+0x1c4a/0x1e40
[ 581.087111] [<c01be064>] __lock_acquire+0x334/0x15a0
[ 581.087111] [<c01bf39a>] lock_acquire+0xca/0x220
[ 581.087111] [<c064b210>] mutex_lock_nested+0xa0/0x820
[ 581.087111] [<c03338e3>] sysfs_get_dirent+0x23/0xe0
[ 581.087111] [<c0337220>] sysfs_remove_group+0x30/0x220
[ 581.087111] [<c050e5be>] dpm_sysfs_remove+0x1e/0x30
[ 581.087111] [<c0501711>] device_del+0x71/0x310
[ 581.087111] [<c05019c9>] device_unregister+0x19/0x40
[ 581.087111] [<f899d1c1>] usb_remove_ep_devs+0x31/0x50 [usbcore]
[ 581.087111] [<f898fa13>] remove_intf_ep_devs+0x43/0xa0 [usbcore]
[ 581.087111] [<f8991c83>] usb_set_interface+0x1e3/0x430 [usbcore]
[ 581.087111] [<f80f6f33>] get_ep+0x293/0x350 [gspca_main]
[ 581.087111] [<f80f70c8>] gspca_init_transfer+0xd8/0x840 [gspca_main]
[ 581.087111] [<f80f79ad>] vidioc_streamon+0xfd/0x180 [gspca_main]
[ 581.087111] [<f80e6abc>] __video_do_ioctl+0x29ec/0x71c0 [videodev]
[ 581.087111] [<f80eb36d>] video_ioctl2+0xdd/0x980 [videodev]
[ 581.087111] [<f80e22e7>] v4l2_unlocked_ioctl+0x37/0x70 [videodev]
[ 581.087111] [<c02bd6ed>] vfs_ioctl+0x3d/0x130
[ 581.087111] [<c02bda60>] do_vfs_ioctl+0x80/0xb10
[ 581.087111] [<c02be539>] sys_ioctl+0x49/0xc0
[ 581.087111] [<c010484c>] sysenter_do_call+0x12/0x32
[ 581.087111]
[ 581.087111] other info that might help us debug this:
[ 581.087111]
[ 581.087111] 2 locks held by svv/3409:
[ 581.087111] #0: (&gspca_dev->queue_lock){+.+.+.}, at: [<f80f78e7>] vidioc_streamon+0x37/0x180 [gspca_main]
[ 581.087111] #1: (&gspca_dev->usb_lock){+.+...}, at: [<f80f7019>] gspca_init_transfer+0x29/0x840 [gspca_main]
[ 581.087111]
[ 581.087111] stack backtrace:
[ 581.087111] Pid: 3409, comm: svv Not tainted 2.6.33-rc2 #1
[ 581.087111] Call Trace:
[ 581.087111] [<c06473f8>] ? printk+0x34/0x54
[ 581.087111] [<c01bb456>] print_circular_bug+0x196/0x1b0
[ 581.087111] [<c01bdb3a>] validate_chain+0x1c4a/0x1e40
[ 581.087111] [<c01b7638>] ? save_trace+0x48/0x150
[ 581.087111] [<c050eab0>] ? device_pm_remove+0x20/0x60
[ 581.087111] [<c01be064>] __lock_acquire+0x334/0x15a0
[ 581.087111] [<c01be064>] ? __lock_acquire+0x334/0x15a0
[ 581.087111] [<c01bf39a>] lock_acquire+0xca/0x220
[ 581.087111] [<c03338e3>] ? sysfs_get_dirent+0x23/0xe0
[ 581.087111] [<c03338e3>] ? sysfs_get_dirent+0x23/0xe0
[ 581.087111] [<c064b210>] mutex_lock_nested+0xa0/0x820
[ 581.087111] [<c03338e3>] ? sysfs_get_dirent+0x23/0xe0
[ 581.087111] [<c01b96fb>] ? mark_held_locks+0x9b/0xe0
[ 581.087111] [<c03338e3>] sysfs_get_dirent+0x23/0xe0
[ 581.087111] [<c0337220>] sysfs_remove_group+0x30/0x220
[ 581.087111] [<c01b9f37>] ? trace_hardirqs_on+0x27/0x40
[ 581.087111] [<c050e5be>] dpm_sysfs_remove+0x1e/0x30
[ 581.087111] [<c0501711>] device_del+0x71/0x310
[ 581.087111] [<c05019c9>] device_unregister+0x19/0x40
[ 581.087111] [<f899d1c1>] usb_remove_ep_devs+0x31/0x50 [usbcore]
[ 581.087111] [<f898fa13>] remove_intf_ep_devs+0x43/0xa0 [usbcore]
[ 581.087111] [<f8991c83>] usb_set_interface+0x1e3/0x430 [usbcore]
[ 581.087111] [<f80f6f33>] get_ep+0x293/0x350 [gspca_main]
[ 581.087111] [<c064a6be>] ? mutex_lock_interruptible_nested+0x9ce/0xa20
[ 581.087111] [<f80f7019>] ? gspca_init_transfer+0x29/0x840 [gspca_main]
[ 581.087111] [<f80f70c8>] gspca_init_transfer+0xd8/0x840 [gspca_main]
[ 581.087111] [<f80f78e7>] ? vidioc_streamon+0x37/0x180 [gspca_main]
[ 581.087111] [<f80f78e7>] ? vidioc_streamon+0x37/0x180 [gspca_main]
[ 581.087111] [<f80f79ad>] vidioc_streamon+0xfd/0x180 [gspca_main]
[ 581.087111] [<f80e6abc>] __video_do_ioctl+0x29ec/0x71c0 [videodev]
[ 581.087111] [<c064ee8f>] ? _raw_spin_unlock_irq+0x8f/0x100
[ 581.087111] [<c01be064>] ? __lock_acquire+0x334/0x15a0
[ 581.087111] [<c01bf7c0>] ? lock_release_non_nested+0xc0/0x550
[ 581.087111] [<c026ccb0>] ? might_fault+0xa0/0x120
[ 581.087111] [<c026ccb0>] ? might_fault+0xa0/0x120
[ 581.087111] [<c026ccb0>] ? might_fault+0xa0/0x120
[ 581.087111] [<c026cd12>] ? might_fault+0x102/0x120
[ 581.087111] [<c026ccb0>] ? might_fault+0xa0/0x120
[ 581.087111] [<c0427491>] ? _copy_from_user+0x51/0x1d0
[ 581.087111] [<f80eb36d>] video_ioctl2+0xdd/0x980 [videodev]
[ 581.087111] [<c0149199>] ? __wake_up+0x29/0x90
[ 581.087111] [<c064f003>] ? _raw_spin_unlock_irqrestore+0x103/0x150
[ 581.087111] [<c01b9e12>] ? trace_hardirqs_on_caller+0x312/0x410
[ 581.087111] [<c01b9f37>] ? trace_hardirqs_on+0x27/0x40
[ 581.087111] [<f80eb290>] ? video_ioctl2+0x0/0x980 [videodev]
[ 581.087111] [<f80e22e7>] v4l2_unlocked_ioctl+0x37/0x70 [videodev]
[ 581.087111] [<f80e22b0>] ? v4l2_unlocked_ioctl+0x0/0x70 [videodev]
[ 581.087111] [<c02bd6ed>] vfs_ioctl+0x3d/0x130
[ 581.087111] [<c01b9f37>] ? trace_hardirqs_on+0x27/0x40
[ 581.087111] [<c02bda60>] do_vfs_ioctl+0x80/0xb10
[ 581.087111] [<c04cde27>] ? tty_write+0x2a7/0x490
[ 581.087111] [<c02a22a7>] ? vfs_write+0x177/0x260
[ 581.087111] [<c010487b>] ? sysenter_exit+0xf/0x16
[ 581.087111] [<c02be539>] sys_ioctl+0x49/0xc0
[ 581.087111] [<c010484c>] sysenter_do_call+0x12/0x32
Regards,
Márton Németh
> 2010/1/10 Németh Márton <nm127@freemail.hu>:
>> Hi,
>>
>> I tried the gspca_sunplus driver from http://linuxtv.org/hg/~jfrancois/gspca/
>> rev 13915 on top of Linux kernel 2.6.32. When I plug the Trust 610 LCD PowerC@m Zoom
>> device in webcam mode (0x06d6:0x0031) then two devices are created: /dev/video0
>> and /dev/video1:
>>
>> [31636.528184] usb 3-2: new full speed USB device using uhci_hcd and address 5
>> [31636.740722] usb 3-2: New USB device found, idVendor=06d6, idProduct=0031
>> [31636.740744] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>> [31636.740760] usb 3-2: Product: Trust 610 LCD POWERC@M ZOOM
>> [31636.740772] usb 3-2: Manufacturer: Trust
>> [31636.744229] usb 3-2: configuration #1 chosen from 1 choice
>> [31636.747584] gspca: probing 06d6:0031
>> [31636.760176] gspca: video0 created
>> [31636.760643] gspca: probing 06d6:0031
>> [31636.772063] gspca: video1 created
>>
>> The /dev/video0 is working correctly but the /dev/video1 just causes error:
>> $ ./svv -d /dev/video1
>> raw pixfmt: JPEG 464x480
>> pixfmt: RGB3 464x480
>> mmap method
>> VIDIOC_STREAMON error 5, Input/output error
>>
>> Here is the USB descriptor of the device:
>>
>> Trust 610 LCD POWERC@M ZOOM
>> Manufacturer: Trust
>> Speed: 12Mb/s (full)
>> USB Version: 1.00
>> Device Class: 00(>ifc )
>> Device Subclass: 00
>> Device Protocol: 00
>> Maximum Default Endpoint Size: 8
>> Number of Configurations: 1
>> Vendor Id: 06d6
>> Product Id: 0031
>> Revision Number: 1.00
>>
>> Config Number: 1
>> Number of Interfaces: 2
>> Attributes: 80
>> MaxPower Needed: 500mA
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 0
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 0
>> Interval: 1ms
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 1
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 128
>> Interval: 1ms
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 2
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 384
>> Interval: 1ms
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 3
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 512
>> Interval: 1ms
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 4
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 640
>> Interval: 1ms
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 5
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 768
>> Interval: 1ms
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 6
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 896
>> Interval: 1ms
>>
>> Interface Number: 0
>> Name: sunplus
>> Alternate Number: 7
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 1
>>
>> Endpoint Address: 81
>> Direction: in
>> Attribute: 1
>> Type: Isoc
>> Max Packet Size: 1023
>> Interval: 1ms
>>
>> Interface Number: 1
>> Name: sunplus
>> Alternate Number: 0
>> Class: ff(vend.)
>> Sub Class: 00
>> Protocol: 00
>> Number of Endpoints: 3
>>
>> Endpoint Address: 82
>> Direction: in
>> Attribute: 2
>> Type: Bulk
>> Max Packet Size: 64
>> Interval: 0ms
>>
>> Endpoint Address: 03
>> Direction: out
>> Attribute: 2
>> Type: Bulk
>> Max Packet Size: 64
>> Interval: 0ms
>>
>> Endpoint Address: 84
>> Direction: in
>> Attribute: 3
>> Type: Int.
>> Max Packet Size: 1
>> Interval: 1ms
>>
>> Regards,
>>
>> Márton Németh
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: gspca_sunplus problem: more than one device is created
2010-01-10 16:38 gspca_sunplus problem: more than one device is created Németh Márton
2010-01-10 17:11 ` leandro Costantino
@ 2010-01-10 19:35 ` Jean-Francois Moine
2010-01-10 20:47 ` Németh Márton
2010-01-11 0:22 ` Hans de Goede
1 sibling, 2 replies; 7+ messages in thread
From: Jean-Francois Moine @ 2010-01-10 19:35 UTC (permalink / raw)
To: Németh Márton; +Cc: V4L Mailing List
On Sun, 10 Jan 2010 17:38:00 +0100
Németh Márton <nm127@freemail.hu> wrote:
> I tried the gspca_sunplus driver from
> http://linuxtv.org/hg/~jfrancois/gspca/ rev 13915 on top of Linux
> kernel 2.6.32. When I plug the Trust 610 LCD PowerC@m Zoom device in
> webcam mode (0x06d6:0x0031) then two devices are created: /dev/video0
> and /dev/video1:
[snip]
OK, this is a bug. I did not imagine that some webcams had the same
interface class for two different devices. I am fixing it.
Thanks.
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: gspca_sunplus problem: more than one device is created
2010-01-10 19:35 ` Jean-Francois Moine
@ 2010-01-10 20:47 ` Németh Márton
2010-01-11 0:22 ` Hans de Goede
1 sibling, 0 replies; 7+ messages in thread
From: Németh Márton @ 2010-01-10 20:47 UTC (permalink / raw)
To: Jean-Francois Moine; +Cc: V4L Mailing List
Jean-Francois Moine wrote:
> On Sun, 10 Jan 2010 17:38:00 +0100
> Németh Márton <nm127@freemail.hu> wrote:
>
>> I tried the gspca_sunplus driver from
>> http://linuxtv.org/hg/~jfrancois/gspca/ rev 13915 on top of Linux
>> kernel 2.6.32. When I plug the Trust 610 LCD PowerC@m Zoom device in
>> webcam mode (0x06d6:0x0031) then two devices are created: /dev/video0
>> and /dev/video1:
> [snip]
>
> OK, this is a bug. I did not imagine that some webcams had the same
> interface class for two different devices. I am fixing it.
rev 13917 from http://linuxtv.org/hg/~jfrancois/gspca/ works correctly
with Trust 610 LCD PowerC@m Zoom device in webcam mode (0x06d6:0x0031):
only one device is created.
Thanks for the fix.
Regards,
Márton Németh
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: gspca_sunplus problem: more than one device is created
2010-01-10 19:35 ` Jean-Francois Moine
2010-01-10 20:47 ` Németh Márton
@ 2010-01-11 0:22 ` Hans de Goede
2010-01-11 18:19 ` Jean-Francois Moine
1 sibling, 1 reply; 7+ messages in thread
From: Hans de Goede @ 2010-01-11 0:22 UTC (permalink / raw)
To: Jean-Francois Moine; +Cc: Németh Márton, V4L Mailing List
Hi,
On 01/10/2010 08:35 PM, Jean-Francois Moine wrote:
> On Sun, 10 Jan 2010 17:38:00 +0100
> Németh Márton<nm127@freemail.hu> wrote:
>
>> I tried the gspca_sunplus driver from
>> http://linuxtv.org/hg/~jfrancois/gspca/ rev 13915 on top of Linux
>> kernel 2.6.32. When I plug the Trust 610 LCD PowerC@m Zoom device in
>> webcam mode (0x06d6:0x0031) then two devices are created: /dev/video0
>> and /dev/video1:
> [snip]
>
> OK, this is a bug. I did not imagine that some webcams had the same
> interface class for two different devices. I am fixing it.
>
JF,
You did not mark this as high priority, still it should go into 2.6.33.
can you please send a mail to Mauro asking for this ?
Regards,
Hans
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: gspca_sunplus problem: more than one device is created
2010-01-11 0:22 ` Hans de Goede
@ 2010-01-11 18:19 ` Jean-Francois Moine
0 siblings, 0 replies; 7+ messages in thread
From: Jean-Francois Moine @ 2010-01-11 18:19 UTC (permalink / raw)
To: Hans de Goede; +Cc: Németh Márton, V4L Mailing List
On Mon, 11 Jan 2010 01:22:50 +0100
Hans de Goede <hdegoede@redhat.com> wrote:
> You did not mark this as high priority, still it should go into
> 2.6.33. can you please send a mail to Mauro asking for this ?
The previous change (test of the interface class) had not a high
priority, so, it will not go into 2.6.33. Then, both changes will go
into 2.6.34. I hope you did not mark a high priority to the cpia1 port
to gspca...
Regards.
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2010-01-11 18:18 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-10 16:38 gspca_sunplus problem: more than one device is created Németh Márton
2010-01-10 17:11 ` leandro Costantino
2010-01-10 19:42 ` Németh Márton
2010-01-10 19:35 ` Jean-Francois Moine
2010-01-10 20:47 ` Németh Márton
2010-01-11 0:22 ` Hans de Goede
2010-01-11 18:19 ` Jean-Francois Moine
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox