Re: em28xx - Your board has no unique USB ID and thus need a hint to be detected

[Steffen Pankratz <kratz00@gmx.de>]

[-- Attachment #1: Type: text/plain, Size: 3783 bytes --]

On Mon, 22 Mar 2010 13:54:16 -0400
Devin Heitmueller <dheitmueller@kernellabs.com> wrote:

Hi Devin,


> In the meantime, you can add "card=53" as a modprobe option to em28xx, and it
> should start working for you.

thanks that worked.
I was abled to tune to one DVB-T channel, back in the days
using Markus Rechberger's driver I had all of the available channels.
But this could also be a problem with my antenna setup,
I will recheck later.

With the old driver I also had support for the remote control,
what could be the problem on this topic?

I still have to check Analog TV.

And finally some dmesg output:

usb 1-4: new high speed USB device using ehci_hcd and address 13
em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
em28xx #0: chip ID is em2882/em2883
em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 5a 00 55 aa 71 74 54 03 00 17 98 01 00 00 00 00
em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb6a56b20
em28xx #0: EEPROM info:
em28xx #0:      AC97 audio (5 sample rates)
em28xx #0:      USB Remote wakeup capable
em28xx #0:      500mA max power
em28xx #0:      Table at 0x04, strings=0x206a, 0x006a, 0x0000
em28xx #0: Identified as Pinnacle Hybrid Pro (card=53)
tvp5150 3-005c: chip found @ 0xb8 (em28xx #0)
tuner 3-0061: chip found @ 0xc2 (em28xx #0)
xc2028 3-0061: creating new instance
xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
usb 1-4: firmware: requesting xc3028-v27.fw
xc2028 3-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
xc2028 3-0061: Loading firmware for type=BASE (1), id 0000000000000000.
xc2028 3-0061: Loading firmware for type=(0), id 000000000000b700.
SCODE (20000000), id 000000000000b700:
xc2028 3-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
em28xx #0: Config register raw data: 0x58
em28xx #0: AC97 vendor ID = 0xffffffff
em28xx #0: AC97 features = 0x6a90
em28xx #0: Empia 202 AC97 audio processor detected
tvp5150 3-005c: tvp5150am1 detected.
em28xx #0: v4l2 driver version 0.1.2
em28xx #0: V4L2 video device registered as video0
em28xx #0: V4L2 VBI device registered as vbi0
xc2028 3-0061: attaching existing instance
xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
em28xx #0: em28xx #0/2: xc3028 attached
DVB: registering new adapter (em28xx #0)
DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)...
em28xx #0: Successfully loaded em28xx-dvb
em28xx audio device (eb1a:2881): interface 1, class 1
em28xx audio device (eb1a:2881): interface 2, class 1

-- 
Hermes powered by LFS SVN-20070420 (Linux 2.6.33.1)

Best regards, Steffen Pankratz.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]