em28xx - Your board has no unique USB ID and thus need a hint to be detected

em28xx - Your board has no unique USB ID and thus need a hint to be detected

[Steffen Pankratz]

[-- Attachment #1: Type: text/plain, Size: 10709 bytes --]

Hi,

this USB stick is a Pinnacle Pctv Hybrid Pro 320e device
(ID eb1a:2881 eMPIA Technology, Inc.). 

Is there anything else you need to know?

Mar 19 17:54:47 hermes kernel: usb 1-4: new high speed USB device using ehci_hcd and address 5
Mar 19 17:54:47 hermes kernel: Linux video capture interface: v2.00
Mar 19 17:54:47 hermes kernel: em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
Mar 19 17:54:47 hermes kernel: em28xx #0: chip ID is em2882/em2883
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom e0: 5a 00 55 aa 71 74 54 03 00 17 98 01 00 00 00 00
Mar 19 17:54:47 hermes kernel: em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
Mar 19 17:54:47 hermes kernel: em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb6a56b20
Mar 19 17:54:47 hermes kernel: em28xx #0: EEPROM info:
Mar 19 17:54:47 hermes kernel: em28xx #0:^IAC97 audio (5 sample rates)
Mar 19 17:54:47 hermes kernel: em28xx #0:^IUSB Remote wakeup capable
Mar 19 17:54:47 hermes kernel: em28xx #0:^I500mA max power
Mar 19 17:54:47 hermes kernel: em28xx #0:^ITable at 0x04, strings=0x206a, 0x006a, 0x0000
Mar 19 17:54:47 hermes kernel: em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
Mar 19 17:54:47 hermes kernel: em28xx #0: found i2c device @ 0xa0 [eeprom]
Mar 19 17:54:47 hermes kernel: em28xx #0: found i2c device @ 0xb8 [tvp5150a]
Mar 19 17:54:47 hermes kernel: em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
Mar 19 17:54:47 hermes kernel: em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
Mar 19 17:54:47 hermes kernel: em28xx #0: You may try to use card=<n> insmod option to workaround that.
Mar 19 17:54:47 hermes kernel: em28xx #0: Please send an email with this log to:
Mar 19 17:54:47 hermes kernel: em28xx #0: ^IV4L Mailing List <linux-media@vger.kernel.org>
Mar 19 17:54:47 hermes kernel: em28xx #0: Board eeprom hash is 0xb6a56b20
Mar 19 17:54:47 hermes kernel: em28xx #0: Board i2c devicelist hash is 0x27e10080
Mar 19 17:54:47 hermes kernel: em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=0 -> Unknown EM2800 video grabber
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=1 -> Unknown EM2750/28xx video grabber
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=2 -> Terratec Cinergy 250 USB
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=3 -> Pinnacle PCTV USB 2
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=4 -> Hauppauge WinTV USB 2
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=5 -> MSI VOX USB 2.0
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=6 -> Terratec Cinergy 200 USB
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=7 -> Leadtek Winfast USB II
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=8 -> Kworld USB2800
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=10 -> Hauppauge WinTV HVR 900
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=11 -> Terratec Hybrid XS
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=12 -> Kworld PVR TV 2800 RF
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=13 -> Terratec Prodigy XS
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=15 -> V-Gear PocketTV
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=16 -> Hauppauge WinTV HVR 950
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=17 -> Pinnacle PCTV HD Pro Stick
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=18 -> Hauppauge WinTV HVR 900 (R2)
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=19 -> EM2860/SAA711X Reference Design
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=20 -> AMD ATI TV Wonder HD 600
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=22 -> EM2710/EM2750/EM2751 webcam grabber
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=23 -> Huaqi DLCW-130
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=24 -> D-Link DUB-T210 TV Tuner
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=25 -> Gadmei UTV310
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=26 -> Hercules Smart TV USB 2.0
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=28 -> Leadtek Winfast USB II Deluxe
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=29 -> (null)
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=30 -> Videology 20K14XUSB USB2.0
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=31 -> Usbgear VD204v9
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=32 -> Supercomp USB 2.0 TV
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=33 -> (null)
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=34 -> Terratec Cinergy A Hybrid XS
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=35 -> Typhoon DVD Maker
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=36 -> NetGMBH Cam
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=37 -> Gadmei UTV330
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=38 -> Yakumo MovieMixer
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=39 -> KWorld PVRTV 300U
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=40 -> Plextor ConvertX PX-TV100U
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=41 -> Kworld 350 U DVB-T
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=42 -> Kworld 355 U DVB-T
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=43 -> Terratec Cinergy T XS
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=44 -> Terratec Cinergy T XS (MT2060)
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=45 -> Pinnacle PCTV DVB-T
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=46 -> Compro, VideoMate U3
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=47 -> KWorld DVB-T 305U
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=48 -> KWorld DVB-T 310U
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=49 -> MSI DigiVox A/D
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=50 -> MSI DigiVox A/D II
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=51 -> Terratec Hybrid XS Secam
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=52 -> DNT DA2 Hybrid
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=53 -> Pinnacle Hybrid Pro
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=54 -> Kworld VS-DVB-T 323UR
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=55 -> Terratec Hybrid XS (em2882)
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=56 -> Pinnacle Hybrid Pro (2)
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=57 -> Kworld PlusTV HD Hybrid 330
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=58 -> Compro VideoMate ForYou/Stereo
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=59 -> (null)
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=60 -> Hauppauge WinTV HVR 850
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=61 -> Pixelview PlayTV Box 4 USB 2.0
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=62 -> Gadmei TVR200
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=63 -> Kaiomy TVnPC U2
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=64 -> Easy Cap Capture DC-60
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=65 -> IO-DATA GV-MVP/SZ
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=66 -> Empire dual TV
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=67 -> Terratec Grabby
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=68 -> Terratec AV350
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=69 -> KWorld ATSC 315U HDTV TV Box
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=70 -> Evga inDtube
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=71 -> Silvercrest Webcam 1.3mpix
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=72 -> Gadmei UTV330+
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=73 -> Reddo DVB-C USB TV Box
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=74 -> Actionmaster/LinXcel/Digitus VC211A
Mar 19 17:54:47 hermes kernel: em28xx #0:     card=75 -> Dikom DK300
Mar 19 17:54:47 hermes kernel: em28xx #0: Config register raw data: 0x58
Mar 19 17:54:47 hermes kernel: em28xx #0: AC97 vendor ID = 0xa808a808
Mar 19 17:54:47 hermes kernel: em28xx #0: AC97 features = 0xa808
Mar 19 17:54:47 hermes kernel: em28xx #0: Unknown AC97 audio processor detected!
Mar 19 17:54:47 hermes kernel: em28xx #0: v4l2 driver version 0.1.2
Mar 19 17:54:47 hermes kernel: em28xx #0: V4L2 video device registered as video0
Mar 19 17:54:47 hermes kernel: em28xx #0: V4L2 VBI device registered as vbi0
Mar 19 17:54:47 hermes kernel: em28xx audio device (eb1a:2881): interface 1, class 1
Mar 19 17:54:47 hermes kernel: em28xx audio device (eb1a:2881): interface 2, class 1
Mar 19 17:54:47 hermes kernel: usbcore: registered new interface driver em28xx
Mar 19 17:54:47 hermes kernel: em28xx driver loaded

-- 
Hermes powered by LFS SVN-20070420 (Linux 2.6.33.1)

Best regards, Steffen Pankratz.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: em28xx - Your board has no unique USB ID and thus need a hint to be detected

[Devin Heitmueller]

On Fri, Mar 19, 2010 at 1:01 PM, Steffen Pankratz <kratz00@gmx.de> wrote:
> Hi,
>
> this USB stick is a Pinnacle Pctv Hybrid Pro 320e device
> (ID eb1a:2881 eMPIA Technology, Inc.).
>
> Is there anything else you need to know?
<snip>

This was fixed some time ago.  Just install the current v4l-dvb code
(instructions can be found at http://linuxtv.org/repo)

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: em28xx - Your board has no unique USB ID and thus need a hint to be detected

[Steffen Pankratz]

[-- Attachment #1: Type: text/plain, Size: 848 bytes --]

On Fri, 19 Mar 2010 13:07:23 -0400
Devin Heitmueller <dheitmueller@kernellabs.com> wrote:

> On Fri, Mar 19, 2010 at 1:01 PM, Steffen Pankratz <kratz00@gmx.de> wrote:
> > Hi,
> >
> > this USB stick is a Pinnacle Pctv Hybrid Pro 320e device
> > (ID eb1a:2881 eMPIA Technology, Inc.).
> >
> > Is there anything else you need to know?
> <snip>
> 
> This was fixed some time ago.  Just install the current v4l-dvb code
> (instructions can be found at http://linuxtv.org/repo)

This is what I did.

hg tip output:

changeset:   14494:929298149eba
tag:         tip
user:        Douglas Schilling Landgraf <dougsland@redhat.com>
date:        Thu Mar 18 23:47:27 2010 -0300
summary:     ir-keytable: fix prototype for kernels < 2.6.22


-- 
Hermes powered by LFS SVN-20070420 (Linux 2.6.33.1)

Best regards, Steffen Pankratz.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: em28xx - Your board has no unique USB ID and thus need a hint to be detected

[Devin Heitmueller]

On Fri, Mar 19, 2010 at 1:13 PM, Steffen Pankratz <kratz00@gmx.de> wrote:
> On Fri, 19 Mar 2010 13:07:23 -0400
> Devin Heitmueller <dheitmueller@kernellabs.com> wrote:
>
>> On Fri, Mar 19, 2010 at 1:01 PM, Steffen Pankratz <kratz00@gmx.de> wrote:
>> > Hi,
>> >
>> > this USB stick is a Pinnacle Pctv Hybrid Pro 320e device
>> > (ID eb1a:2881 eMPIA Technology, Inc.).
>> >
>> > Is there anything else you need to know?
>> <snip>
>>
>> This was fixed some time ago.  Just install the current v4l-dvb code
>> (instructions can be found at http://linuxtv.org/repo)
>
> This is what I did.
>
> hg tip output:
>
> changeset:   14494:929298149eba
> tag:         tip
> user:        Douglas Schilling Landgraf <dougsland@redhat.com>
> date:        Thu Mar 18 23:47:27 2010 -0300
> summary:     ir-keytable: fix prototype for kernels < 2.6.22

Hmm...  Interesting.  Your eeprom hash is different than everybody
else who has a 320e.  I will have to do a manual comparison and see
why it is different.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: em28xx - Your board has no unique USB ID and thus need a hint to be detected

[Steffen Pankratz]

[-- Attachment #1: Type: text/plain, Size: 1347 bytes --]

On Fri, 19 Mar 2010 13:17:20 -0400
Devin Heitmueller <dheitmueller@kernellabs.com> wrote:

> On Fri, Mar 19, 2010 at 1:13 PM, Steffen Pankratz <kratz00@gmx.de> wrote:
> > On Fri, 19 Mar 2010 13:07:23 -0400
> > Devin Heitmueller <dheitmueller@kernellabs.com> wrote:
> >
> >> On Fri, Mar 19, 2010 at 1:01 PM, Steffen Pankratz <kratz00@gmx.de> wrote:
> >> > Hi,
> >> >
> >> > this USB stick is a Pinnacle Pctv Hybrid Pro 320e device
> >> > (ID eb1a:2881 eMPIA Technology, Inc.).
> >> >
> >> > Is there anything else you need to know?
> >> <snip>
> >>
> >> This was fixed some time ago.  Just install the current v4l-dvb code
> >> (instructions can be found at http://linuxtv.org/repo)
> >
> > This is what I did.
> >
> > hg tip output:
> >
> > changeset:   14494:929298149eba
> > tag:         tip
> > user:        Douglas Schilling Landgraf <dougsland@redhat.com>
> > date:        Thu Mar 18 23:47:27 2010 -0300
> > summary:     ir-keytable: fix prototype for kernels < 2.6.22
> 
> Hmm...  Interesting.  Your eeprom hash is different than everybody
> else who has a 320e.  I will have to do a manual comparison and see
> why it is different.

Hi Devin,

I don't want to push you but are there any news?

-- 
Hermes powered by LFS SVN-20070420 (Linux 2.6.33.1)

Best regards, Steffen Pankratz.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: em28xx - Your board has no unique USB ID and thus need a hint to be detected

[Devin Heitmueller]

On Mon, Mar 22, 2010 at 1:45 PM, Steffen Pankratz <kratz00@gmx.de> wrote:
> Hi Devin,
>
> I don't want to push you but are there any news?

I've been too buried in other projects to work on it.  In the
meantime, you can add "card=53" as a modprobe option to em28xx, and it
should start working for you.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

Re: em28xx - Your board has no unique USB ID and thus need a hint to be detected

[Steffen Pankratz]

[-- Attachment #1: Type: text/plain, Size: 3783 bytes --]

On Mon, 22 Mar 2010 13:54:16 -0400
Devin Heitmueller <dheitmueller@kernellabs.com> wrote:

Hi Devin,


> In the meantime, you can add "card=53" as a modprobe option to em28xx, and it
> should start working for you.

thanks that worked.
I was abled to tune to one DVB-T channel, back in the days
using Markus Rechberger's driver I had all of the available channels.
But this could also be a problem with my antenna setup,
I will recheck later.

With the old driver I also had support for the remote control,
what could be the problem on this topic?

I still have to check Analog TV.

And finally some dmesg output:

usb 1-4: new high speed USB device using ehci_hcd and address 13
em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
em28xx #0: chip ID is em2882/em2883
em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 5a 00 55 aa 71 74 54 03 00 17 98 01 00 00 00 00
em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb6a56b20
em28xx #0: EEPROM info:
em28xx #0:      AC97 audio (5 sample rates)
em28xx #0:      USB Remote wakeup capable
em28xx #0:      500mA max power
em28xx #0:      Table at 0x04, strings=0x206a, 0x006a, 0x0000
em28xx #0: Identified as Pinnacle Hybrid Pro (card=53)
tvp5150 3-005c: chip found @ 0xb8 (em28xx #0)
tuner 3-0061: chip found @ 0xc2 (em28xx #0)
xc2028 3-0061: creating new instance
xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
usb 1-4: firmware: requesting xc3028-v27.fw
xc2028 3-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
xc2028 3-0061: Loading firmware for type=BASE (1), id 0000000000000000.
xc2028 3-0061: Loading firmware for type=(0), id 000000000000b700.
SCODE (20000000), id 000000000000b700:
xc2028 3-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
em28xx #0: Config register raw data: 0x58
em28xx #0: AC97 vendor ID = 0xffffffff
em28xx #0: AC97 features = 0x6a90
em28xx #0: Empia 202 AC97 audio processor detected
tvp5150 3-005c: tvp5150am1 detected.
em28xx #0: v4l2 driver version 0.1.2
em28xx #0: V4L2 video device registered as video0
em28xx #0: V4L2 VBI device registered as vbi0
xc2028 3-0061: attaching existing instance
xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
em28xx #0: em28xx #0/2: xc3028 attached
DVB: registering new adapter (em28xx #0)
DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)...
em28xx #0: Successfully loaded em28xx-dvb
em28xx audio device (eb1a:2881): interface 1, class 1
em28xx audio device (eb1a:2881): interface 2, class 1

-- 
Hermes powered by LFS SVN-20070420 (Linux 2.6.33.1)

Best regards, Steffen Pankratz.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]