From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: "Stefan Lippers-Hollmann" <s.L-H@gmx.de>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Kernel Testers List <kernel-testers@vger.kernel.org>,
Maciej Rutecki <maciej.rutecki@gmail.com>,
"Christian Kujau" <lists@nerdbynature.de>,
linux-media@vger.kernel.org
Subject: Re: [Bug #15589] 2.6.34-rc1: Badness at fs/proc/generic.c:316
Date: Wed, 5 May 2010 02:23:48 +0200 [thread overview]
Message-ID: <201005050223.48237.rjw@sisk.pl> (raw)
In-Reply-To: <201005050218.02620.s.L-H@gmx.de>
On Wednesday 05 May 2010, Stefan Lippers-Hollmann wrote:
> Hi
>
> On Wednesday 05 May 2010, Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a summary report
> > of recent regressions.
> >
> > The following bug entry is on the current list of known regressions
> > from 2.6.33. Please verify if it still should be listed and let the tracking team
> > know (either way).
> >
> >
> > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15589
> > Subject : 2.6.34-rc1: Badness at fs/proc/generic.c:316
> > Submitter : Christian Kujau <lists@nerdbynature.de>
> > Date : 2010-03-13 23:53 (53 days old)
> > Message-ID : <alpine.DEB.2.01.1003131544340.5493@bogon.housecafe.de>
> > References : http://marc.info/?l=linux-kernel&m=126852442903680&w=2
>
> Still valid for b2c2_flexcop_pci in 2.6.34-rc6-git2:
>
> [ 8.736930] Linux video capture interface: v2.00
> [ 8.809720] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
> [ 8.818680] flexcop-pci: will use the HW PID filter.
> [ 8.818685] flexcop-pci: card revision 2
> [ 8.818694] b2c2_flexcop_pci 0000:06:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> [ 8.818794] ------------[ cut here ]------------
> [ 8.818799] WARNING: at /tmp/buildd/linux-sidux-2.6-2.6.34~rc6-git2/debian/build/source_amd64_none/fs/proc/generic.c:317 __xlate_proc_name+0xb5/0xd0()
> [ 8.818801] Hardware name: EP45-DS3
> [ 8.818802] name 'Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver'
> [ 8.818804] Modules linked in: b2c2_flexcop_pci(+) cx88xx b2c2_flexcop rfkill v4l2_common ir_common videodev drm snd_pcm snd_seq rtc_cmos snd_timer rtc_core snd_seq_device rtc_lib v4l1_compat tveeprom v4l2_compat_ioctl32 ir_core dvb_core snd videobuf_dma_sg cx24123 cx24113 videobuf_core s5h1420 tpm_tis led_class btcx_risc tpm i2c_i801 i2c_algo_bit tpm_bios i2c_core evdev intel_agp soundcore snd_page_alloc button processor ext4 mbcache jbd2 crc16 dm_mod sg sr_mod cdrom sd_mod usbhid hid uhci_hcd ahci firewire_ohci libata firewire_core crc_itu_t ehci_hcd r8169 mii scsi_mod thermal usbcore nls_base [last unloaded: scsi_wait_scan]
> [ 8.818832] Pid: 1064, comm: modprobe Not tainted 2.6.34-rc6-sidux-amd64 #1
> [ 8.818833] Call Trace:
> [ 8.818837] [<ffffffff8104ba83>] ? warn_slowpath_common+0x73/0xb0
> [ 8.818839] [<ffffffff8104bb20>] ? warn_slowpath_fmt+0x40/0x50
> [ 8.818842] [<ffffffff8114f545>] ? __xlate_proc_name+0xb5/0xd0
> [ 8.818844] [<ffffffff8114fb2e>] ? __proc_create+0x7e/0x150
> [ 8.818846] [<ffffffff811504e7>] ? proc_mkdir_mode+0x27/0x60
> [ 8.818849] [<ffffffff8109fb55>] ? register_handler_proc+0x115/0x130
> [ 8.818852] [<ffffffff8109d4c1>] ? __setup_irq+0x1d1/0x330
> [ 8.818855] [<ffffffffa03bc160>] ? flexcop_pci_isr+0x0/0x190 [b2c2_flexcop_pci]
> [ 8.818858] [<ffffffff8109d735>] ? request_threaded_irq+0x115/0x1b0
> [ 8.818860] [<ffffffffa03bc495>] ? flexcop_pci_probe+0x1a5/0x330 [b2c2_flexcop_pci]
> [ 8.818864] [<ffffffff811ceef2>] ? local_pci_probe+0x12/0x20
> [ 8.818867] [<ffffffff811d02ca>] ? pci_device_probe+0x10a/0x130
> [ 8.818870] [<ffffffff8125cdda>] ? driver_sysfs_add+0x5a/0x80
> [ 8.818872] [<ffffffff8125cf03>] ? driver_probe_device+0x93/0x190
> [ 8.818874] [<ffffffff8125d093>] ? __driver_attach+0x93/0xa0
> [ 8.818876] [<ffffffff8125d000>] ? __driver_attach+0x0/0xa0
> [ 8.818878] [<ffffffff8125c638>] ? bus_for_each_dev+0x58/0x80
> [ 8.818880] [<ffffffff8125be70>] ? bus_add_driver+0xb0/0x250
> [ 8.818882] [<ffffffff8125d38a>] ? driver_register+0x6a/0x130
> [ 8.818884] [<ffffffff811d056c>] ? __pci_register_driver+0x4c/0xc0
> [ 8.818887] [<ffffffffa03bf000>] ? flexcop_pci_module_init+0x0/0x20 [b2c2_flexcop_pci]
> [ 8.818890] [<ffffffff81002044>] ? do_one_initcall+0x34/0x1a0
> [ 8.818893] [<ffffffff8107d15f>] ? sys_init_module+0xdf/0x260
> [ 8.818896] [<ffffffff81009f42>] ? system_call_fastpath+0x16/0x1b
> [ 8.818897] ---[ end trace 46b5c98323696f39 ]---
> [ 8.822389] DVB: registering new adapter (FlexCop Digital TV device)
> [ 8.823874] b2c2-flexcop: MAC address = 00:d0:d7:0c:83:d6
Thanks for the update.
Rafael
next prev parent reply other threads:[~2010-05-05 0:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <JzEGxUyyQHG.A.ZtH.YHJ4LB@chimera>
[not found] ` <8VO9AsMlpMD.A.IFC.aKJ4LB@chimera>
2010-05-05 0:18 ` [Bug #15589] 2.6.34-rc1: Badness at fs/proc/generic.c:316 Stefan Lippers-Hollmann
2010-05-05 0:23 ` Rafael J. Wysocki [this message]
[not found] <g77CuMUl7QI.A.5wF.V5OFMB@chimera>
[not found] ` <YPGdyfWGvNK.A.C8B.d9OFMB@chimera>
2010-06-13 15:22 ` Stefan Lippers-Hollmann
2010-06-13 18:10 ` Christian Kujau
2010-06-13 19:57 ` Grant Likely
2010-06-14 6:39 ` Alexey Dobriyan
2010-06-14 12:27 ` Jindrich Makovicka
2010-06-14 15:42 ` Grant Likely
[not found] <deuQKFRcc0B.A.3EG.BRSzLB@tosh>
[not found] ` <YeFfFNFyTSF.A.vUB.fSSzLB@tosh>
2010-04-30 2:44 ` Stefan Lippers-Hollmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201005050223.48237.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=kernel-testers@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lists@nerdbynature.de \
--cc=maciej.rutecki@gmail.com \
--cc=s.L-H@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox