* [PATCH 1/6] Remove usbvideo quickcam_messenger driver
2010-05-28 17:02 [PATCH 0/6] Remove some obsolete drivers for 2.6.35 Amerigo Wang
@ 2010-05-28 17:02 ` Amerigo Wang
2010-05-28 17:02 ` [PATCH 2/6] Remove obsolete ov511 driver Amerigo Wang
` (4 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Amerigo Wang @ 2010-05-28 17:02 UTC (permalink / raw)
To: linux-media; +Cc: Hans de Goede, Amerigo Wang
From: Amerigo Wang <amwang@redhat.com>
Date: Fri, 28 May 2010 17:26:32 +0800
Subject: [PATCH 1/6] Remove usbvideo quickcam_messenger driver
obsolete v4l1 driver replaced by gspca_stv06xx
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Amerigo Wang <amwang@redhat.com>
---
Documentation/feature-removal-schedule.txt | 8 -
drivers/media/video/usbvideo/Kconfig | 14 -
drivers/media/video/usbvideo/Makefile | 1 -
drivers/media/video/usbvideo/quickcam_messenger.c | 1126 ---------------------
drivers/media/video/usbvideo/quickcam_messenger.h | 112 --
5 files changed, 0 insertions(+), 1261 deletions(-)
delete mode 100644 drivers/media/video/usbvideo/quickcam_messenger.c
delete mode 100644 drivers/media/video/usbvideo/quickcam_messenger.h
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index a86152a..0d75cd9 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -459,14 +459,6 @@ Who: Corentin Chary <corentin.chary@gmail.com>
----------------------------
-What: usbvideo quickcam_messenger driver
-When: 2.6.35
-Files: drivers/media/video/usbvideo/quickcam_messenger.[ch]
-Why: obsolete v4l1 driver replaced by gspca_stv06xx
-Who: Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
What: ov511 v4l1 driver
When: 2.6.35
Files: drivers/media/video/ov511.[ch]
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
index adb1c04..d6e1695 100644
--- a/drivers/media/video/usbvideo/Kconfig
+++ b/drivers/media/video/usbvideo/Kconfig
@@ -37,17 +37,3 @@ config USB_KONICAWC
To compile this driver as a module, choose M here: the
module will be called konicawc.
-config USB_QUICKCAM_MESSENGER
- tristate "USB Logitech Quickcam Messenger (DEPRECATED)"
- depends on VIDEO_V4L1
- select VIDEO_USBVIDEO
- ---help---
- This driver is DEPRECATED please use the gspca stv06xx module
- instead.
-
- Say Y or M here to enable support for the USB Logitech Quickcam
- Messenger webcam.
-
- To compile this driver as a module, choose M here: the
- module will be called quickcam_messenger.
-
diff --git a/drivers/media/video/usbvideo/Makefile b/drivers/media/video/usbvideo/Makefile
index 4a1b144..bb52eb8 100644
--- a/drivers/media/video/usbvideo/Makefile
+++ b/drivers/media/video/usbvideo/Makefile
@@ -2,4 +2,3 @@ obj-$(CONFIG_VIDEO_USBVIDEO) += usbvideo.o
obj-$(CONFIG_USB_IBMCAM) += ibmcam.o ultracam.o
obj-$(CONFIG_USB_KONICAWC) += konicawc.o
obj-$(CONFIG_USB_VICAM) += vicam.o
-obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += quickcam_messenger.o
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c
deleted file mode 100644
index fbd665f..0000000
--- a/drivers/media/video/usbvideo/quickcam_messenger.c
+++ /dev/null
@@ -1,1126 +0,0 @@
-/*
- * Driver for Logitech Quickcam Messenger usb video camera
- * Copyright (C) Jaya Kumar
- *
- * This work was sponsored by CIS(M) Sdn Bhd.
- * History:
- * 05/08/2006 - Jaya Kumar
- * I wrote this based on the konicawc by Simon Evans.
- * -
- * Full credit for reverse engineering and creating an initial
- * working linux driver for the VV6422 goes to the qce-ga project by
- * Tuukka Toivonen, Jochen Hoenicke, Peter McConnell,
- * Cristiano De Michele, Georg Acher, Jean-Frederic Clere as well as
- * others.
- * ---
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/usb/input.h>
-#include <linux/slab.h>
-
-#include "usbvideo.h"
-#include "quickcam_messenger.h"
-
-/*
- * Version Information
- */
-
-#ifdef CONFIG_USB_DEBUG
-static int debug;
-#define DEBUG(n, format, arg...) \
- if (n <= debug) { \
- printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __func__ , ## arg); \
- }
-#else
-#define DEBUG(n, arg...)
-static const int debug;
-#endif
-
-#define DRIVER_VERSION "v0.01"
-#define DRIVER_DESC "Logitech Quickcam Messenger USB"
-
-#define USB_LOGITECH_VENDOR_ID 0x046D
-#define USB_QCM_PRODUCT_ID 0x08F0
-
-#define MAX_CAMERAS 1
-
-#define MAX_COLOUR 32768
-#define MAX_HUE 32768
-#define MAX_BRIGHTNESS 32768
-#define MAX_CONTRAST 32768
-#define MAX_WHITENESS 32768
-
-static int size = SIZE_320X240;
-static int colour = MAX_COLOUR;
-static int hue = MAX_HUE;
-static int brightness = MAX_BRIGHTNESS;
-static int contrast = MAX_CONTRAST;
-static int whiteness = MAX_WHITENESS;
-
-static struct usbvideo *cams;
-
-static struct usb_device_id qcm_table [] = {
- { USB_DEVICE(USB_LOGITECH_VENDOR_ID, USB_QCM_PRODUCT_ID) },
- { }
-};
-MODULE_DEVICE_TABLE(usb, qcm_table);
-
-#ifdef CONFIG_INPUT
-static void qcm_register_input(struct qcm *cam, struct usb_device *dev)
-{
- struct input_dev *input_dev;
- int error;
-
- usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));
- strlcat(cam->input_physname, "/input0", sizeof(cam->input_physname));
-
- cam->input = input_dev = input_allocate_device();
- if (!input_dev) {
- dev_warn(&dev->dev, "insufficient mem for cam input device\n");
- return;
- }
-
- input_dev->name = "QCM button";
- input_dev->phys = cam->input_physname;
- usb_to_input_id(dev, &input_dev->id);
- input_dev->dev.parent = &dev->dev;
-
- input_dev->evbit[0] = BIT_MASK(EV_KEY);
- input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
-
- error = input_register_device(cam->input);
- if (error) {
- dev_warn(&dev->dev,
- "Failed to register camera's input device, err: %d\n",
- error);
- input_free_device(cam->input);
- cam->input = NULL;
- }
-}
-
-static void qcm_unregister_input(struct qcm *cam)
-{
- if (cam->input) {
- input_unregister_device(cam->input);
- cam->input = NULL;
- }
-}
-
-static void qcm_report_buttonstat(struct qcm *cam)
-{
- if (cam->input) {
- input_report_key(cam->input, KEY_CAMERA, cam->button_sts);
- input_sync(cam->input);
- }
-}
-
-static void qcm_int_irq(struct urb *urb)
-{
- int ret;
- struct uvd *uvd = urb->context;
- struct qcm *cam;
-
- if (!CAMERA_IS_OPERATIONAL(uvd))
- return;
-
- if (!uvd->streaming)
- return;
-
- uvd->stats.urb_count++;
-
- if (urb->status < 0)
- uvd->stats.iso_err_count++;
- else {
- if (urb->actual_length > 0 ) {
- cam = (struct qcm *) uvd->user_data;
- if (cam->button_sts_buf == 0x88)
- cam->button_sts = 0x0;
- else if (cam->button_sts_buf == 0x80)
- cam->button_sts = 0x1;
- qcm_report_buttonstat(cam);
- }
- }
-
- ret = usb_submit_urb(urb, GFP_ATOMIC);
- if (ret < 0)
- err("usb_submit_urb error (%d)", ret);
-}
-
-static int qcm_setup_input_int(struct qcm *cam, struct uvd *uvd)
-{
- int errflag;
- usb_fill_int_urb(cam->button_urb, uvd->dev,
- usb_rcvintpipe(uvd->dev, uvd->video_endp + 1),
- &cam->button_sts_buf,
- 1,
- qcm_int_irq,
- uvd, 16);
-
- errflag = usb_submit_urb(cam->button_urb, GFP_KERNEL);
- if (errflag)
- err ("usb_submit_int ret %d", errflag);
- return errflag;
-}
-
-static void qcm_stop_int_data(struct qcm *cam)
-{
- usb_kill_urb(cam->button_urb);
-}
-
-static int qcm_alloc_int_urb(struct qcm *cam)
-{
- cam->button_urb = usb_alloc_urb(0, GFP_KERNEL);
-
- if (!cam->button_urb)
- return -ENOMEM;
-
- return 0;
-}
-
-static void qcm_free_int(struct qcm *cam)
-{
- usb_free_urb(cam->button_urb);
-}
-#endif /* CONFIG_INPUT */
-
-static int qcm_stv_setb(struct usb_device *dev, u16 reg, u8 val)
-{
- int ret;
-
- /* we'll wait up to 3 slices but no more */
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x04, USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
- reg, 0, &val, 1, 3*HZ);
- return ret;
-}
-
-static int qcm_stv_setw(struct usb_device *dev, u16 reg, __le16 val)
-{
- int ret;
-
- /* we'll wait up to 3 slices but no more */
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x04, USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
- reg, 0, &val, 2, 3*HZ);
- return ret;
-}
-
-static int qcm_stv_getw(struct usb_device *dev, unsigned short reg,
- __le16 *val)
-{
- int ret;
-
- /* we'll wait up to 3 slices but no more */
- ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
- 0x04, USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE,
- reg, 0, val, 2, 3*HZ);
- return ret;
-}
-
-static int qcm_camera_on(struct uvd *uvd)
-{
- int ret;
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, STV_ISO_ENABLE, 0x01));
- return 0;
-}
-
-static int qcm_camera_off(struct uvd *uvd)
-{
- int ret;
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, STV_ISO_ENABLE, 0x00));
- return 0;
-}
-
-static void qcm_hsv2rgb(u16 hue, u16 sat, u16 val, u16 *r, u16 *g, u16 *b)
-{
- unsigned int segment, valsat;
- signed int h = (signed int) hue;
- unsigned int s = (sat - 32768) * 2; /* rescale */
- unsigned int v = val;
- unsigned int p;
-
- /*
- the registers controlling gain are 8 bit of which
- we affect only the last 4 bits with our gain.
- we know that if saturation is 0, (unsaturated) then
- we're grayscale (center axis of the colour cone) so
- we set rgb=value. we use a formula obtained from
- wikipedia to map the cone to the RGB plane. it's
- as follows for the human value case of h=0..360,
- s=0..1, v=0..1
- h_i = h/60 % 6 , f = h/60 - h_i , p = v(1-s)
- q = v(1 - f*s) , t = v(1 - (1-f)s)
- h_i==0 => r=v , g=t, b=p
- h_i==1 => r=q , g=v, b=p
- h_i==2 => r=p , g=v, b=t
- h_i==3 => r=p , g=q, b=v
- h_i==4 => r=t , g=p, b=v
- h_i==5 => r=v , g=p, b=q
- the bottom side (the point) and the stuff just up
- of that is black so we simplify those two cases.
- */
- if (sat < 32768) {
- /* anything less than this is unsaturated */
- *r = val;
- *g = val;
- *b = val;
- return;
- }
- if (val <= (0xFFFF/8)) {
- /* anything less than this is black */
- *r = 0;
- *g = 0;
- *b = 0;
- return;
- }
-
- /* the rest of this code is copying tukkat's
- implementation of the hsv2rgb conversion as taken
- from qc-usb-messenger code. the 10923 is 0xFFFF/6
- to divide the cone into 6 sectors. */
-
- segment = (h + 10923) & 0xFFFF;
- segment = segment*3 >> 16; /* 0..2: 0=R, 1=G, 2=B */
- hue -= segment * 21845; /* -10923..10923 */
- h = hue;
- h *= 3;
- valsat = v*s >> 16; /* 0..65534 */
- p = v - valsat;
- if (h >= 0) {
- unsigned int t = v - (valsat * (32769 - h) >> 15);
- switch (segment) {
- case 0: /* R-> */
- *r = v;
- *g = t;
- *b = p;
- break;
- case 1: /* G-> */
- *r = p;
- *g = v;
- *b = t;
- break;
- case 2: /* B-> */
- *r = t;
- *g = p;
- *b = v;
- break;
- }
- } else {
- unsigned int q = v - (valsat * (32769 + h) >> 15);
- switch (segment) {
- case 0: /* ->R */
- *r = v;
- *g = p;
- *b = q;
- break;
- case 1: /* ->G */
- *r = q;
- *g = v;
- *b = p;
- break;
- case 2: /* ->B */
- *r = p;
- *g = q;
- *b = v;
- break;
- }
- }
-}
-
-static int qcm_sensor_set_gains(struct uvd *uvd, u16 hue,
- u16 saturation, u16 value)
-{
- int ret;
- u16 r=0,g=0,b=0;
-
- /* this code is based on qc-usb-messenger */
- qcm_hsv2rgb(hue, saturation, value, &r, &g, &b);
-
- r >>= 12;
- g >>= 12;
- b >>= 12;
-
- /* min val is 8 */
- r = max((u16) 8, r);
- g = max((u16) 8, g);
- b = max((u16) 8, b);
-
- r |= 0x30;
- g |= 0x30;
- b |= 0x30;
-
- /* set the r,g,b gain registers */
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x0509, r));
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x050A, g));
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x050B, b));
-
- /* doing as qc-usb did */
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x050C, 0x2A));
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x050D, 0x01));
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143F, 0x01));
-
- return 0;
-}
-
-static int qcm_sensor_set_exposure(struct uvd *uvd, int exposure)
-{
- int ret;
- int formedval;
-
- /* calculation was from qc-usb-messenger driver */
- formedval = ( exposure >> 12 );
-
- /* max value for formedval is 14 */
- formedval = min(formedval, 14);
-
- CHECK_RET(ret, qcm_stv_setb(uvd->dev,
- 0x143A, 0xF0 | formedval));
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143F, 0x01));
- return 0;
-}
-
-static int qcm_sensor_setlevels(struct uvd *uvd, int brightness, int contrast,
- int hue, int colour)
-{
- int ret;
- /* brightness is exposure, contrast is gain, colour is saturation */
- CHECK_RET(ret,
- qcm_sensor_set_exposure(uvd, brightness));
- CHECK_RET(ret, qcm_sensor_set_gains(uvd, hue, colour, contrast));
-
- return 0;
-}
-
-static int qcm_sensor_setsize(struct uvd *uvd, u8 size)
-{
- int ret;
-
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x1505, size));
- return 0;
-}
-
-static int qcm_sensor_set_shutter(struct uvd *uvd, int whiteness)
-{
- int ret;
- /* some rescaling as done by the qc-usb-messenger code */
- if (whiteness > 0xC000)
- whiteness = 0xC000 + (whiteness & 0x3FFF)*8;
-
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143D,
- (whiteness >> 8) & 0xFF));
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143E,
- (whiteness >> 16) & 0x03));
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143F, 0x01));
-
- return 0;
-}
-
-static int qcm_sensor_init(struct uvd *uvd)
-{
- struct qcm *cam = (struct qcm *) uvd->user_data;
- int ret;
- int i;
-
- for (i=0; i < ARRAY_SIZE(regval_table) ; i++) {
- CHECK_RET(ret, qcm_stv_setb(uvd->dev,
- regval_table[i].reg,
- regval_table[i].val));
- }
-
- CHECK_RET(ret, qcm_stv_setw(uvd->dev, 0x15c1,
- cpu_to_le16(ISOC_PACKET_SIZE)));
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x15c3, 0x08));
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143f, 0x01));
-
- CHECK_RET(ret, qcm_stv_setb(uvd->dev, STV_ISO_ENABLE, 0x00));
-
- CHECK_RET(ret, qcm_sensor_setsize(uvd, camera_sizes[cam->size].cmd));
-
- CHECK_RET(ret, qcm_sensor_setlevels(uvd, uvd->vpic.brightness,
- uvd->vpic.contrast, uvd->vpic.hue, uvd->vpic.colour));
-
- CHECK_RET(ret, qcm_sensor_set_shutter(uvd, uvd->vpic.whiteness));
- CHECK_RET(ret, qcm_sensor_setsize(uvd, camera_sizes[cam->size].cmd));
-
- return 0;
-}
-
-static int qcm_set_camera_size(struct uvd *uvd)
-{
- int ret;
- struct qcm *cam = (struct qcm *) uvd->user_data;
-
- CHECK_RET(ret, qcm_sensor_setsize(uvd, camera_sizes[cam->size].cmd));
- cam->width = camera_sizes[cam->size].width;
- cam->height = camera_sizes[cam->size].height;
- uvd->videosize = VIDEOSIZE(cam->width, cam->height);
-
- return 0;
-}
-
-static int qcm_setup_on_open(struct uvd *uvd)
-{
- int ret;
-
- CHECK_RET(ret, qcm_sensor_set_gains(uvd, uvd->vpic.hue,
- uvd->vpic.colour, uvd->vpic.contrast));
- CHECK_RET(ret, qcm_sensor_set_exposure(uvd, uvd->vpic.brightness));
- CHECK_RET(ret, qcm_sensor_set_shutter(uvd, uvd->vpic.whiteness));
- CHECK_RET(ret, qcm_set_camera_size(uvd));
- CHECK_RET(ret, qcm_camera_on(uvd));
- return 0;
-}
-
-static void qcm_adjust_picture(struct uvd *uvd)
-{
- int ret;
- struct qcm *cam = (struct qcm *) uvd->user_data;
-
- ret = qcm_camera_off(uvd);
- if (ret) {
- err("can't turn camera off. abandoning pic adjustment");
- return;
- }
-
- /* if there's been a change in contrast, hue, or
- colour then we need to recalculate hsv in order
- to update gains */
- if ((cam->contrast != uvd->vpic.contrast) ||
- (cam->hue != uvd->vpic.hue) ||
- (cam->colour != uvd->vpic.colour)) {
- cam->contrast = uvd->vpic.contrast;
- cam->hue = uvd->vpic.hue;
- cam->colour = uvd->vpic.colour;
- ret = qcm_sensor_set_gains(uvd, cam->hue, cam->colour,
- cam->contrast);
- if (ret) {
- err("can't set gains. abandoning pic adjustment");
- return;
- }
- }
-
- if (cam->brightness != uvd->vpic.brightness) {
- cam->brightness = uvd->vpic.brightness;
- ret = qcm_sensor_set_exposure(uvd, cam->brightness);
- if (ret) {
- err("can't set exposure. abandoning pic adjustment");
- return;
- }
- }
-
- if (cam->whiteness != uvd->vpic.whiteness) {
- cam->whiteness = uvd->vpic.whiteness;
- qcm_sensor_set_shutter(uvd, cam->whiteness);
- if (ret) {
- err("can't set shutter. abandoning pic adjustment");
- return;
- }
- }
-
- ret = qcm_camera_on(uvd);
- if (ret) {
- err("can't reenable camera. pic adjustment failed");
- return;
- }
-}
-
-static int qcm_process_frame(struct uvd *uvd, u8 *cdata, int framelen)
-{
- int datalen;
- int totaldata;
- struct framehdr {
- __be16 id;
- __be16 len;
- };
- struct framehdr *fhdr;
-
- totaldata = 0;
- while (framelen) {
- fhdr = (struct framehdr *) cdata;
- datalen = be16_to_cpu(fhdr->len);
- framelen -= 4;
- cdata += 4;
-
- if ((fhdr->id) == cpu_to_be16(0x8001)) {
- RingQueue_Enqueue(&uvd->dp, marker, 4);
- totaldata += 4;
- continue;
- }
- if ((fhdr->id & cpu_to_be16(0xFF00)) == cpu_to_be16(0x0200)) {
- RingQueue_Enqueue(&uvd->dp, cdata, datalen);
- totaldata += datalen;
- }
- framelen -= datalen;
- cdata += datalen;
- }
- return totaldata;
-}
-
-static int qcm_compress_iso(struct uvd *uvd, struct urb *dataurb)
-{
- int totlen;
- int i;
- unsigned char *cdata;
-
- totlen=0;
- for (i = 0; i < dataurb->number_of_packets; i++) {
- int n = dataurb->iso_frame_desc[i].actual_length;
- int st = dataurb->iso_frame_desc[i].status;
-
- cdata = dataurb->transfer_buffer +
- dataurb->iso_frame_desc[i].offset;
-
- if (st < 0) {
- dev_warn(&uvd->dev->dev,
- "Data error: packet=%d. len=%d. status=%d.\n",
- i, n, st);
- uvd->stats.iso_err_count++;
- continue;
- }
- if (!n)
- continue;
-
- totlen += qcm_process_frame(uvd, cdata, n);
- }
- return totlen;
-}
-
-static void resubmit_urb(struct uvd *uvd, struct urb *urb)
-{
- int ret;
-
- urb->dev = uvd->dev;
- ret = usb_submit_urb(urb, GFP_ATOMIC);
- if (ret)
- err("usb_submit_urb error (%d)", ret);
-}
-
-static void qcm_isoc_irq(struct urb *urb)
-{
- int len;
- struct uvd *uvd = urb->context;
-
- if (!CAMERA_IS_OPERATIONAL(uvd))
- return;
-
- if (!uvd->streaming)
- return;
-
- uvd->stats.urb_count++;
-
- if (!urb->actual_length) {
- resubmit_urb(uvd, urb);
- return;
- }
-
- len = qcm_compress_iso(uvd, urb);
- resubmit_urb(uvd, urb);
- uvd->stats.urb_length = len;
- uvd->stats.data_count += len;
- if (len)
- RingQueue_WakeUpInterruptible(&uvd->dp);
-}
-
-static int qcm_start_data(struct uvd *uvd)
-{
- struct qcm *cam = (struct qcm *) uvd->user_data;
- int i;
- int errflag;
- int pktsz;
- int err;
-
- pktsz = uvd->iso_packet_len;
- if (!CAMERA_IS_OPERATIONAL(uvd)) {
- err("Camera is not operational");
- return -EFAULT;
- }
-
- err = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltActive);
- if (err < 0) {
- err("usb_set_interface error");
- uvd->last_error = err;
- return -EBUSY;
- }
-
- for (i=0; i < USBVIDEO_NUMSBUF; i++) {
- int j, k;
- struct urb *urb = uvd->sbuf[i].urb;
- urb->dev = uvd->dev;
- urb->context = uvd;
- urb->pipe = usb_rcvisocpipe(uvd->dev, uvd->video_endp);
- urb->interval = 1;
- urb->transfer_flags = URB_ISO_ASAP;
- urb->transfer_buffer = uvd->sbuf[i].data;
- urb->complete = qcm_isoc_irq;
- urb->number_of_packets = FRAMES_PER_DESC;
- urb->transfer_buffer_length = pktsz * FRAMES_PER_DESC;
- for (j=k=0; j < FRAMES_PER_DESC; j++, k += pktsz) {
- urb->iso_frame_desc[j].offset = k;
- urb->iso_frame_desc[j].length = pktsz;
- }
- }
-
- uvd->streaming = 1;
- uvd->curframe = -1;
- for (i=0; i < USBVIDEO_NUMSBUF; i++) {
- errflag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL);
- if (errflag)
- err ("usb_submit_isoc(%d) ret %d", i, errflag);
- }
-
- CHECK_RET(err, qcm_setup_input_int(cam, uvd));
- CHECK_RET(err, qcm_camera_on(uvd));
- return 0;
-}
-
-static void qcm_stop_data(struct uvd *uvd)
-{
- struct qcm *cam;
- int i, j;
- int ret;
-
- if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL))
- return;
- cam = (struct qcm *) uvd->user_data;
-
- ret = qcm_camera_off(uvd);
- if (ret)
- dev_warn(&uvd->dev->dev, "couldn't turn the cam off.\n");
-
- uvd->streaming = 0;
-
- /* Unschedule all of the iso td's */
- for (i=0; i < USBVIDEO_NUMSBUF; i++)
- usb_kill_urb(uvd->sbuf[i].urb);
-
- qcm_stop_int_data(cam);
-
- if (!uvd->remove_pending) {
- /* Set packet size to 0 */
- j = usb_set_interface(uvd->dev, uvd->iface,
- uvd->ifaceAltInactive);
- if (j < 0) {
- err("usb_set_interface() error %d.", j);
- uvd->last_error = j;
- }
- }
-}
-
-static void qcm_process_isoc(struct uvd *uvd, struct usbvideo_frame *frame)
-{
- struct qcm *cam = (struct qcm *) uvd->user_data;
- int x;
- struct rgb *rgbL0;
- struct rgb *rgbL1;
- struct bayL0 *bayL0;
- struct bayL1 *bayL1;
- int hor,ver,hordel,verdel;
- assert(frame != NULL);
-
- switch (cam->size) {
- case SIZE_160X120:
- hor = 162; ver = 124; hordel = 1; verdel = 2;
- break;
- case SIZE_320X240:
- default:
- hor = 324; ver = 248; hordel = 2; verdel = 4;
- break;
- }
-
- if (frame->scanstate == ScanState_Scanning) {
- while (RingQueue_GetLength(&uvd->dp) >=
- 4 + (hor*verdel + hordel)) {
- if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) &&
- (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xff) &&
- (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00) &&
- (RING_QUEUE_PEEK(&uvd->dp, 3) == 0xff)) {
- frame->curline = 0;
- frame->scanstate = ScanState_Lines;
- frame->frameState = FrameState_Grabbing;
- RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 4);
- /*
- * if we're starting, we need to discard the first
- * 4 lines of y bayer data
- * and the first 2 gr elements of x bayer data
- */
- RING_QUEUE_DEQUEUE_BYTES(&uvd->dp,
- (hor*verdel + hordel));
- break;
- }
- RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1);
- }
- }
-
- if (frame->scanstate == ScanState_Scanning)
- return;
-
- /* now we can start processing bayer data so long as we have at least
- * 2 lines worth of data. this is the simplest demosaicing method that
- * I could think of. I use each 2x2 bayer element without interpolation
- * to generate 4 rgb pixels.
- */
- while ( frame->curline < cam->height &&
- (RingQueue_GetLength(&uvd->dp) >= hor*2)) {
- /* get 2 lines of bayer for demosaicing
- * into 2 lines of RGB */
- RingQueue_Dequeue(&uvd->dp, cam->scratch, hor*2);
- bayL0 = (struct bayL0 *) cam->scratch;
- bayL1 = (struct bayL1 *) (cam->scratch + hor);
- /* frame->curline is the rgb y line */
- rgbL0 = (struct rgb *)
- ( frame->data + (cam->width*3*frame->curline));
- /* w/2 because we're already doing 2 pixels */
- rgbL1 = rgbL0 + (cam->width/2);
-
- for (x=0; x < cam->width; x+=2) {
- rgbL0->r = bayL0->r;
- rgbL0->g = bayL0->g;
- rgbL0->b = bayL1->b;
-
- rgbL0->r2 = bayL0->r;
- rgbL0->g2 = bayL1->g;
- rgbL0->b2 = bayL1->b;
-
- rgbL1->r = bayL0->r;
- rgbL1->g = bayL1->g;
- rgbL1->b = bayL1->b;
-
- rgbL1->r2 = bayL0->r;
- rgbL1->g2 = bayL1->g;
- rgbL1->b2 = bayL1->b;
-
- rgbL0++;
- rgbL1++;
-
- bayL0++;
- bayL1++;
- }
-
- frame->seqRead_Length += cam->width*3*2;
- frame->curline += 2;
- }
- /* See if we filled the frame */
- if (frame->curline == cam->height) {
- frame->frameState = FrameState_Done_Hold;
- frame->curline = 0;
- uvd->curframe = -1;
- uvd->stats.frame_num++;
- }
-}
-
-/* taken from konicawc */
-static int qcm_set_video_mode(struct uvd *uvd, struct video_window *vw)
-{
- int ret;
- int newsize;
- int oldsize;
- int x = vw->width;
- int y = vw->height;
- struct qcm *cam = (struct qcm *) uvd->user_data;
-
- if (x > 0 && y > 0) {
- DEBUG(2, "trying to find size %d,%d", x, y);
- for (newsize = 0; newsize <= MAX_FRAME_SIZE; newsize++) {
- if ((camera_sizes[newsize].width == x) &&
- (camera_sizes[newsize].height == y))
- break;
- }
- } else
- newsize = cam->size;
-
- if (newsize > MAX_FRAME_SIZE) {
- DEBUG(1, "couldn't find size %d,%d", x, y);
- return -EINVAL;
- }
-
- if (newsize == cam->size) {
- DEBUG(1, "Nothing to do");
- return 0;
- }
-
- qcm_stop_data(uvd);
-
- if (cam->size != newsize) {
- oldsize = cam->size;
- cam->size = newsize;
- ret = qcm_set_camera_size(uvd);
- if (ret) {
- err("Couldn't set camera size, err=%d",ret);
- /* restore the original size */
- cam->size = oldsize;
- return ret;
- }
- }
-
- /* Flush the input queue and clear any current frame in progress */
-
- RingQueue_Flush(&uvd->dp);
- if (uvd->curframe != -1) {
- uvd->frame[uvd->curframe].curline = 0;
- uvd->frame[uvd->curframe].seqRead_Length = 0;
- uvd->frame[uvd->curframe].seqRead_Index = 0;
- }
-
- CHECK_RET(ret, qcm_start_data(uvd));
- return 0;
-}
-
-static int qcm_configure_video(struct uvd *uvd)
-{
- int ret;
- memset(&uvd->vpic, 0, sizeof(uvd->vpic));
- memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old));
-
- uvd->vpic.colour = colour;
- uvd->vpic.hue = hue;
- uvd->vpic.brightness = brightness;
- uvd->vpic.contrast = contrast;
- uvd->vpic.whiteness = whiteness;
- uvd->vpic.depth = 24;
- uvd->vpic.palette = VIDEO_PALETTE_RGB24;
-
- memset(&uvd->vcap, 0, sizeof(uvd->vcap));
- strcpy(uvd->vcap.name, "QCM USB Camera");
- uvd->vcap.type = VID_TYPE_CAPTURE;
- uvd->vcap.channels = 1;
- uvd->vcap.audios = 0;
-
- uvd->vcap.minwidth = camera_sizes[SIZE_160X120].width;
- uvd->vcap.minheight = camera_sizes[SIZE_160X120].height;
- uvd->vcap.maxwidth = camera_sizes[SIZE_320X240].width;
- uvd->vcap.maxheight = camera_sizes[SIZE_320X240].height;
-
- memset(&uvd->vchan, 0, sizeof(uvd->vchan));
- uvd->vchan.flags = 0 ;
- uvd->vchan.tuners = 0;
- uvd->vchan.channel = 0;
- uvd->vchan.type = VIDEO_TYPE_CAMERA;
- strcpy(uvd->vchan.name, "Camera");
-
- CHECK_RET(ret, qcm_sensor_init(uvd));
- return 0;
-}
-
-static int qcm_probe(struct usb_interface *intf,
- const struct usb_device_id *devid)
-{
- int err;
- struct uvd *uvd;
- struct usb_device *dev = interface_to_usbdev(intf);
- struct qcm *cam;
- size_t buffer_size;
- unsigned char video_ep;
- struct usb_host_interface *interface;
- struct usb_endpoint_descriptor *endpoint;
- int i,j;
- unsigned int ifacenum, ifacenum_inact=0;
- __le16 sensor_id;
-
- /* we don't support multiconfig cams */
- if (dev->descriptor.bNumConfigurations != 1)
- return -ENODEV;
-
- /* first check for the video interface and not
- * the audio interface */
- interface = &intf->cur_altsetting[0];
- if ((interface->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
- || (interface->desc.bInterfaceSubClass !=
- USB_CLASS_VENDOR_SPEC))
- return -ENODEV;
-
- /*
- walk through each endpoint in each setting in the interface
- stop when we find the one that's an isochronous IN endpoint.
- */
- for (i=0; i < intf->num_altsetting; i++) {
- interface = &intf->cur_altsetting[i];
- ifacenum = interface->desc.bAlternateSetting;
- /* walk the end points */
- for (j=0; j < interface->desc.bNumEndpoints; j++) {
- endpoint = &interface->endpoint[j].desc;
-
- if (usb_endpoint_dir_out(endpoint))
- continue; /* not input then not good */
-
- buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
- if (!buffer_size) {
- ifacenum_inact = ifacenum;
- continue; /* 0 pkt size is not what we want */
- }
-
- if (usb_endpoint_xfer_isoc(endpoint)) {
- video_ep = endpoint->bEndpointAddress;
- /* break out of the search */
- goto good_videoep;
- }
- }
- }
- /* failed out since nothing useful was found */
- err("No suitable endpoint was found\n");
- return -ENODEV;
-
-good_videoep:
- /* disable isochronous stream before doing anything else */
- err = qcm_stv_setb(dev, STV_ISO_ENABLE, 0);
- if (err < 0) {
- err("Failed to disable sensor stream");
- return -EIO;
- }
-
- /*
- Check that this is the same unknown sensor that is known to work. This
- sensor is suspected to be the ST VV6422C001. I'll check the same value
- that the qc-usb driver checks. This value is probably not even the
- sensor ID since it matches the USB dev ID. Oh well. If it doesn't
- match, it's probably a diff sensor so exit and apologize.
- */
- err = qcm_stv_getw(dev, CMOS_SENSOR_IDREV, &sensor_id);
- if (err < 0) {
- err("Couldn't read sensor values. Err %d\n",err);
- return err;
- }
- if (sensor_id != cpu_to_le16(0x08F0)) {
- err("Sensor ID %x != %x. Unsupported. Sorry\n",
- le16_to_cpu(sensor_id), (0x08F0));
- return -ENODEV;
- }
-
- uvd = usbvideo_AllocateDevice(cams);
- if (!uvd)
- return -ENOMEM;
-
- cam = (struct qcm *) uvd->user_data;
-
- /* buf for doing demosaicing */
- cam->scratch = kmalloc(324*2, GFP_KERNEL);
- if (!cam->scratch) /* uvd freed in dereg */
- return -ENOMEM;
-
- /* yes, if we fail after here, cam->scratch gets freed
- by qcm_free_uvd */
-
- err = qcm_alloc_int_urb(cam);
- if (err < 0)
- return err;
-
- /* yes, if we fail after here, int urb gets freed
- by qcm_free_uvd */
-
- RESTRICT_TO_RANGE(size, SIZE_160X120, SIZE_320X240);
- cam->width = camera_sizes[size].width;
- cam->height = camera_sizes[size].height;
- cam->size = size;
-
- uvd->debug = debug;
- uvd->flags = 0;
- uvd->dev = dev;
- uvd->iface = intf->altsetting->desc.bInterfaceNumber;
- uvd->ifaceAltActive = ifacenum;
- uvd->ifaceAltInactive = ifacenum_inact;
- uvd->video_endp = video_ep;
- uvd->iso_packet_len = buffer_size;
- uvd->paletteBits = 1L << VIDEO_PALETTE_RGB24;
- uvd->defaultPalette = VIDEO_PALETTE_RGB24;
- uvd->canvas = VIDEOSIZE(320, 240);
- uvd->videosize = VIDEOSIZE(cam->width, cam->height);
- err = qcm_configure_video(uvd);
- if (err) {
- err("failed to configure video settings");
- return err;
- }
-
- err = usbvideo_RegisterVideoDevice(uvd);
- if (err) { /* the uvd gets freed in Deregister */
- err("usbvideo_RegisterVideoDevice() failed.");
- return err;
- }
-
- uvd->max_frame_size = (320 * 240 * 3);
- qcm_register_input(cam, dev);
- usb_set_intfdata(intf, uvd);
- return 0;
-}
-
-static void qcm_free_uvd(struct uvd *uvd)
-{
- struct qcm *cam = (struct qcm *) uvd->user_data;
-
- kfree(cam->scratch);
- qcm_unregister_input(cam);
- qcm_free_int(cam);
-}
-
-static struct usbvideo_cb qcm_driver = {
- .probe = qcm_probe,
- .setupOnOpen = qcm_setup_on_open,
- .processData = qcm_process_isoc,
- .setVideoMode = qcm_set_video_mode,
- .startDataPump = qcm_start_data,
- .stopDataPump = qcm_stop_data,
- .adjustPicture = qcm_adjust_picture,
- .userFree = qcm_free_uvd
-};
-
-static int __init qcm_init(void)
-{
- printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
- DRIVER_DESC "\n");
-
- return usbvideo_register(
- &cams,
- MAX_CAMERAS,
- sizeof(struct qcm),
- "QCM",
- &qcm_driver,
- THIS_MODULE,
- qcm_table);
-}
-
-static void __exit qcm_exit(void)
-{
- usbvideo_Deregister(&cams);
-}
-
-module_param(size, int, 0);
-MODULE_PARM_DESC(size, "Initial Size 0: 160x120 1: 320x240");
-module_param(colour, int, 0);
-MODULE_PARM_DESC(colour, "Initial colour");
-module_param(hue, int, 0);
-MODULE_PARM_DESC(hue, "Initial hue");
-module_param(brightness, int, 0);
-MODULE_PARM_DESC(brightness, "Initial brightness");
-module_param(contrast, int, 0);
-MODULE_PARM_DESC(contrast, "Initial contrast");
-module_param(whiteness, int, 0);
-MODULE_PARM_DESC(whiteness, "Initial whiteness");
-
-#ifdef CONFIG_USB_DEBUG
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)");
-#endif
-
-module_init(qcm_init);
-module_exit(qcm_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jaya Kumar");
-MODULE_DESCRIPTION("QCM USB Camera");
-MODULE_SUPPORTED_DEVICE("QCM USB Camera");
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.h b/drivers/media/video/usbvideo/quickcam_messenger.h
deleted file mode 100644
index 17ace39..0000000
--- a/drivers/media/video/usbvideo/quickcam_messenger.h
+++ /dev/null
@@ -1,112 +0,0 @@
-#ifndef quickcam_messenger_h
-#define quickcam_messenger_h
-
-#ifndef CONFIG_INPUT
-/* if we're not using input we dummy out these functions */
-#define qcm_register_input(...)
-#define qcm_unregister_input(...)
-#define qcm_report_buttonstat(...)
-#define qcm_setup_input_int(...) 0
-#define qcm_stop_int_data(...)
-#define qcm_alloc_int_urb(...) 0
-#define qcm_free_int(...)
-#endif
-
-
-#define CHECK_RET(ret, expr) \
- if ((ret = expr) < 0) return ret
-
-/* Control Registers for the STVV6422 ASIC
- * - this define is taken from the qc-usb-messenger code
- */
-#define STV_ISO_ENABLE 0x1440
-#define ISOC_PACKET_SIZE 1023
-
-/* Chip identification number including revision indicator */
-#define CMOS_SENSOR_IDREV 0xE00A
-
-struct rgb {
- u8 b;
- u8 g;
- u8 r;
- u8 b2;
- u8 g2;
- u8 r2;
-};
-
-struct bayL0 {
- u8 g;
- u8 r;
-};
-
-struct bayL1 {
- u8 b;
- u8 g;
-};
-
-struct cam_size {
- u16 width;
- u16 height;
- u8 cmd;
-};
-
-static const struct cam_size camera_sizes[] = {
- { 160, 120, 0xf },
- { 320, 240, 0x2 },
-};
-
-enum frame_sizes {
- SIZE_160X120 = 0,
- SIZE_320X240 = 1,
-};
-
-#define MAX_FRAME_SIZE SIZE_320X240
-
-struct qcm {
- u16 colour;
- u16 hue;
- u16 brightness;
- u16 contrast;
- u16 whiteness;
-
- u8 size;
- int height;
- int width;
- u8 *scratch;
- struct urb *button_urb;
- u8 button_sts;
- u8 button_sts_buf;
-
-#ifdef CONFIG_INPUT
- struct input_dev *input;
- char input_physname[64];
-#endif
-};
-
-struct regval {
- u16 reg;
- u8 val;
-};
-/* this table is derived from the
-qc-usb-messenger code */
-static const struct regval regval_table[] = {
- { STV_ISO_ENABLE, 0x00 },
- { 0x1436, 0x00 }, { 0x1432, 0x03 },
- { 0x143a, 0xF9 }, { 0x0509, 0x38 },
- { 0x050a, 0x38 }, { 0x050b, 0x38 },
- { 0x050c, 0x2A }, { 0x050d, 0x01 },
- { 0x1431, 0x00 }, { 0x1433, 0x34 },
- { 0x1438, 0x18 }, { 0x1439, 0x00 },
- { 0x143b, 0x05 }, { 0x143c, 0x00 },
- { 0x143e, 0x01 }, { 0x143d, 0x00 },
- { 0x1442, 0xe2 }, { 0x1500, 0xd0 },
- { 0x1500, 0xd0 }, { 0x1500, 0x50 },
- { 0x1501, 0xaf }, { 0x1502, 0xc2 },
- { 0x1503, 0x45 }, { 0x1505, 0x02 },
- { 0x150e, 0x8e }, { 0x150f, 0x37 },
- { 0x15c0, 0x00 },
-};
-
-static const unsigned char marker[] = { 0x00, 0xff, 0x00, 0xFF };
-
-#endif /* quickcam_messenger_h */
--
1.6.5.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 2/6] Remove obsolete ov511 driver
2010-05-28 17:02 [PATCH 0/6] Remove some obsolete drivers for 2.6.35 Amerigo Wang
2010-05-28 17:02 ` [PATCH 1/6] Remove usbvideo quickcam_messenger driver Amerigo Wang
@ 2010-05-28 17:02 ` Amerigo Wang
2010-05-28 17:02 ` [PATCH 3/6] Remove obsolete w9968cf v4l1 driver Amerigo Wang
` (3 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Amerigo Wang @ 2010-05-28 17:02 UTC (permalink / raw)
To: linux-media; +Cc: Hans de Goede, Amerigo Wang
From: Amerigo Wang <amwang@redhat.com>
Date: Fri, 28 May 2010 17:31:39 +0800
Subject: [PATCH 2/6] Remove obsolete ov511 driver
obsolete v4l1 driver replaced by gspca_ov519
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Amerigo Wang <amwang@redhat.com>
---
Documentation/feature-removal-schedule.txt | 8 -
drivers/media/video/Kconfig | 16 -
drivers/media/video/Makefile | 1 -
drivers/media/video/ov511.c | 5995 ----------------------------
drivers/media/video/ov511.h | 573 ---
5 files changed, 0 insertions(+), 6593 deletions(-)
delete mode 100644 drivers/media/video/ov511.c
delete mode 100644 drivers/media/video/ov511.h
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 0d75cd9..044c4bc 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -459,14 +459,6 @@ Who: Corentin Chary <corentin.chary@gmail.com>
----------------------------
-What: ov511 v4l1 driver
-When: 2.6.35
-Files: drivers/media/video/ov511.[ch]
-Why: obsolete v4l1 driver replaced by gspca_ov519
-Who: Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
What: w9968cf v4l1 driver
When: 2.6.35
Files: drivers/media/video/w9968cf*.[ch]
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index ad9e6f9..2b82ab6 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -1039,22 +1039,6 @@ config USB_W9968CF
To compile this driver as a module, choose M here: the
module will be called w9968cf.
-config USB_OV511
- tristate "USB OV511 Camera support (DEPRECATED)"
- depends on VIDEO_V4L1
- default n
- ---help---
- This driver is DEPRECATED please use the gspca ov519 module
- instead. Note that for the ov511 / ov518 support of the gspca module
- you need atleast version 0.6.0 of libv4l.
-
- Say Y here if you want to connect this type of camera to your
- computer's USB port. See <file:Documentation/video4linux/ov511.txt>
- for more information and for a list of supported cameras.
-
- To compile this driver as a module, choose M here: the
- module will be called ov511.
-
config USB_SE401
tristate "USB SE401 Camera support"
depends on VIDEO_V4L1
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index cc93859..82aef40 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -127,7 +127,6 @@ obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
obj-$(CONFIG_USB_DABUSB) += dabusb.o
-obj-$(CONFIG_USB_OV511) += ov511.o
obj-$(CONFIG_USB_SE401) += se401.o
obj-$(CONFIG_USB_STV680) += stv680.o
obj-$(CONFIG_USB_W9968CF) += w9968cf.o
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
deleted file mode 100644
index a109120..0000000
--- a/drivers/media/video/ov511.c
+++ /dev/null
@@ -1,5995 +0,0 @@
-/*
- * OmniVision OV511 Camera-to-USB Bridge Driver
- *
- * Copyright (c) 1999-2003 Mark W. McClelland
- * Original decompression code Copyright 1998-2000 OmniVision Technologies
- * Many improvements by Bret Wallach <bwallac1@san.rr.com>
- * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000)
- * Snapshot code by Kevin Moore
- * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org>
- * Changes by Claudio Matsuoka <claudio@conectiva.com>
- * Original SAA7111A code by Dave Perks <dperks@ibm.net>
- * URB error messages from pwc driver by Nemosoft
- * generic_ioctl() code from videodev.c by Gerd Knorr and Alan Cox
- * Memory management (rvmalloc) code from bttv driver, by Gerd Knorr and others
- *
- * Based on the Linux CPiA driver written by Peter Pregler,
- * Scott J. Bertin and Johannes Erdfelt.
- *
- * Please see the file: Documentation/usb/ov511.txt
- * and the website at: http://alpha.dyndns.org/ov511
- * for more info.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/ctype.h>
-#include <linux/pagemap.h>
-#include <asm/processor.h>
-#include <linux/mm.h>
-#include <linux/device.h>
-
-#if defined (__i386__)
- #include <asm/cpufeature.h>
-#endif
-
-#include "ov511.h"
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.64 for Linux 2.5"
-#define EMAIL "mark@alpha.dyndns.org"
-#define DRIVER_AUTHOR "Mark McClelland <mark@alpha.dyndns.org> & Bret Wallach \
-& Orion Sky Lawlor <olawlor@acm.org> & Kevin Moore & Charl P. Botha \
-<cpbotha@ieee.org> & Claudio Matsuoka <claudio@conectiva.com>"
-#define DRIVER_DESC "ov511 USB Camera Driver"
-
-#define OV511_I2C_RETRIES 3
-#define ENABLE_Y_QUANTABLE 1
-#define ENABLE_UV_QUANTABLE 1
-
-#define OV511_MAX_UNIT_VIDEO 16
-
-/* Pixel count * bytes per YUV420 pixel (1.5) */
-#define MAX_FRAME_SIZE(w, h) ((w) * (h) * 3 / 2)
-
-#define MAX_DATA_SIZE(w, h) (MAX_FRAME_SIZE(w, h) + sizeof(struct timeval))
-
-/* Max size * bytes per YUV420 pixel (1.5) + one extra isoc frame for safety */
-#define MAX_RAW_DATA_SIZE(w, h) ((w) * (h) * 3 / 2 + 1024)
-
-#define FATAL_ERROR(rc) ((rc) < 0 && (rc) != -EPERM)
-
-/**********************************************************************
- * Module Parameters
- * (See ov511.txt for detailed descriptions of these)
- **********************************************************************/
-
-/* These variables (and all static globals) default to zero */
-static int autobright = 1;
-static int autogain = 1;
-static int autoexp = 1;
-static int debug;
-static int snapshot;
-static int cams = 1;
-static int compress;
-static int testpat;
-static int dumppix;
-static int led = 1;
-static int dump_bridge;
-static int dump_sensor;
-static int printph;
-static int phy = 0x1f;
-static int phuv = 0x05;
-static int pvy = 0x06;
-static int pvuv = 0x06;
-static int qhy = 0x14;
-static int qhuv = 0x03;
-static int qvy = 0x04;
-static int qvuv = 0x04;
-static int lightfreq;
-static int bandingfilter;
-static int clockdiv = -1;
-static int packetsize = -1;
-static int framedrop = -1;
-static int fastset;
-static int force_palette;
-static int backlight;
-/* Bitmask marking allocated devices from 0 to OV511_MAX_UNIT_VIDEO */
-static unsigned long ov511_devused;
-static int unit_video[OV511_MAX_UNIT_VIDEO];
-static int remove_zeros;
-static int mirror;
-static int ov518_color;
-
-module_param(autobright, int, 0);
-MODULE_PARM_DESC(autobright, "Sensor automatically changes brightness");
-module_param(autogain, int, 0);
-MODULE_PARM_DESC(autogain, "Sensor automatically changes gain");
-module_param(autoexp, int, 0);
-MODULE_PARM_DESC(autoexp, "Sensor automatically changes exposure");
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug,
- "Debug level: 0=none, 1=inits, 2=warning, 3=config, 4=functions, 5=max");
-module_param(snapshot, int, 0);
-MODULE_PARM_DESC(snapshot, "Enable snapshot mode");
-module_param(cams, int, 0);
-MODULE_PARM_DESC(cams, "Number of simultaneous cameras");
-module_param(compress, int, 0);
-MODULE_PARM_DESC(compress, "Turn on compression");
-module_param(testpat, int, 0);
-MODULE_PARM_DESC(testpat,
- "Replace image with vertical bar testpattern (only partially working)");
-module_param(dumppix, int, 0);
-MODULE_PARM_DESC(dumppix, "Dump raw pixel data");
-module_param(led, int, 0);
-MODULE_PARM_DESC(led,
- "LED policy (OV511+ or later). 0=off, 1=on (default), 2=auto (on when open)");
-module_param(dump_bridge, int, 0);
-MODULE_PARM_DESC(dump_bridge, "Dump the bridge registers");
-module_param(dump_sensor, int, 0);
-MODULE_PARM_DESC(dump_sensor, "Dump the sensor registers");
-module_param(printph, int, 0);
-MODULE_PARM_DESC(printph, "Print frame start/end headers");
-module_param(phy, int, 0);
-MODULE_PARM_DESC(phy, "Prediction range (horiz. Y)");
-module_param(phuv, int, 0);
-MODULE_PARM_DESC(phuv, "Prediction range (horiz. UV)");
-module_param(pvy, int, 0);
-MODULE_PARM_DESC(pvy, "Prediction range (vert. Y)");
-module_param(pvuv, int, 0);
-MODULE_PARM_DESC(pvuv, "Prediction range (vert. UV)");
-module_param(qhy, int, 0);
-MODULE_PARM_DESC(qhy, "Quantization threshold (horiz. Y)");
-module_param(qhuv, int, 0);
-MODULE_PARM_DESC(qhuv, "Quantization threshold (horiz. UV)");
-module_param(qvy, int, 0);
-MODULE_PARM_DESC(qvy, "Quantization threshold (vert. Y)");
-module_param(qvuv, int, 0);
-MODULE_PARM_DESC(qvuv, "Quantization threshold (vert. UV)");
-module_param(lightfreq, int, 0);
-MODULE_PARM_DESC(lightfreq,
- "Light frequency. Set to 50 or 60 Hz, or zero for default settings");
-module_param(bandingfilter, int, 0);
-MODULE_PARM_DESC(bandingfilter,
- "Enable banding filter (to reduce effects of fluorescent lighting)");
-module_param(clockdiv, int, 0);
-MODULE_PARM_DESC(clockdiv, "Force pixel clock divisor to a specific value");
-module_param(packetsize, int, 0);
-MODULE_PARM_DESC(packetsize, "Force a specific isoc packet size");
-module_param(framedrop, int, 0);
-MODULE_PARM_DESC(framedrop, "Force a specific frame drop register setting");
-module_param(fastset, int, 0);
-MODULE_PARM_DESC(fastset, "Allows picture settings to take effect immediately");
-module_param(force_palette, int, 0);
-MODULE_PARM_DESC(force_palette, "Force the palette to a specific value");
-module_param(backlight, int, 0);
-MODULE_PARM_DESC(backlight, "For objects that are lit from behind");
-static unsigned int num_uv;
-module_param_array(unit_video, int, &num_uv, 0);
-MODULE_PARM_DESC(unit_video,
- "Force use of specific minor number(s). 0 is not allowed.");
-module_param(remove_zeros, int, 0);
-MODULE_PARM_DESC(remove_zeros,
- "Remove zero-padding from uncompressed incoming data");
-module_param(mirror, int, 0);
-MODULE_PARM_DESC(mirror, "Reverse image horizontally");
-module_param(ov518_color, int, 0);
-MODULE_PARM_DESC(ov518_color, "Enable OV518 color (experimental)");
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-/**********************************************************************
- * Miscellaneous Globals
- **********************************************************************/
-
-static struct usb_driver ov511_driver;
-
-/* Number of times to retry a failed I2C transaction. Increase this if you
- * are getting "Failed to read sensor ID..." */
-static const int i2c_detect_tries = 5;
-
-static struct usb_device_id device_table [] = {
- { USB_DEVICE(VEND_OMNIVISION, PROD_OV511) },
- { USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) },
- { USB_DEVICE(VEND_MATTEL, PROD_ME2CAM) },
- { } /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, device_table);
-
-static unsigned char yQuanTable511[] = OV511_YQUANTABLE;
-static unsigned char uvQuanTable511[] = OV511_UVQUANTABLE;
-static unsigned char yQuanTable518[] = OV518_YQUANTABLE;
-static unsigned char uvQuanTable518[] = OV518_UVQUANTABLE;
-
-/**********************************************************************
- * Symbolic Names
- **********************************************************************/
-
-/* Known OV511-based cameras */
-static struct symbolic_list camlist[] = {
- { 0, "Generic Camera (no ID)" },
- { 1, "Mustek WCam 3X" },
- { 3, "D-Link DSB-C300" },
- { 4, "Generic OV511/OV7610" },
- { 5, "Puretek PT-6007" },
- { 6, "Lifeview USB Life TV (NTSC)" },
- { 21, "Creative Labs WebCam 3" },
- { 22, "Lifeview USB Life TV (PAL D/K+B/G)" },
- { 36, "Koala-Cam" },
- { 38, "Lifeview USB Life TV (PAL)" },
- { 41, "Samsung Anycam MPC-M10" },
- { 43, "Mtekvision Zeca MV402" },
- { 46, "Suma eON" },
- { 70, "Lifeview USB Life TV (PAL/SECAM)" },
- { 100, "Lifeview RoboCam" },
- { 102, "AverMedia InterCam Elite" },
- { 112, "MediaForte MV300" }, /* or OV7110 evaluation kit */
- { 134, "Ezonics EZCam II" },
- { 192, "Webeye 2000B" },
- { 253, "Alpha Vision Tech. AlphaCam SE" },
- { -1, NULL }
-};
-
-/* Video4Linux1 Palettes */
-static struct symbolic_list v4l1_plist[] = {
- { VIDEO_PALETTE_GREY, "GREY" },
- { VIDEO_PALETTE_HI240, "HI240" },
- { VIDEO_PALETTE_RGB565, "RGB565" },
- { VIDEO_PALETTE_RGB24, "RGB24" },
- { VIDEO_PALETTE_RGB32, "RGB32" },
- { VIDEO_PALETTE_RGB555, "RGB555" },
- { VIDEO_PALETTE_YUV422, "YUV422" },
- { VIDEO_PALETTE_YUYV, "YUYV" },
- { VIDEO_PALETTE_UYVY, "UYVY" },
- { VIDEO_PALETTE_YUV420, "YUV420" },
- { VIDEO_PALETTE_YUV411, "YUV411" },
- { VIDEO_PALETTE_RAW, "RAW" },
- { VIDEO_PALETTE_YUV422P,"YUV422P" },
- { VIDEO_PALETTE_YUV411P,"YUV411P" },
- { VIDEO_PALETTE_YUV420P,"YUV420P" },
- { VIDEO_PALETTE_YUV410P,"YUV410P" },
- { -1, NULL }
-};
-
-static struct symbolic_list brglist[] = {
- { BRG_OV511, "OV511" },
- { BRG_OV511PLUS, "OV511+" },
- { BRG_OV518, "OV518" },
- { BRG_OV518PLUS, "OV518+" },
- { -1, NULL }
-};
-
-static struct symbolic_list senlist[] = {
- { SEN_OV76BE, "OV76BE" },
- { SEN_OV7610, "OV7610" },
- { SEN_OV7620, "OV7620" },
- { SEN_OV7620AE, "OV7620AE" },
- { SEN_OV6620, "OV6620" },
- { SEN_OV6630, "OV6630" },
- { SEN_OV6630AE, "OV6630AE" },
- { SEN_OV6630AF, "OV6630AF" },
- { SEN_OV8600, "OV8600" },
- { SEN_KS0127, "KS0127" },
- { SEN_KS0127B, "KS0127B" },
- { SEN_SAA7111A, "SAA7111A" },
- { -1, NULL }
-};
-
-/* URB error codes: */
-static struct symbolic_list urb_errlist[] = {
- { -ENOSR, "Buffer error (overrun)" },
- { -EPIPE, "Stalled (device not responding)" },
- { -EOVERFLOW, "Babble (device sends too much data)" },
- { -EPROTO, "Bit-stuff error (bad cable?)" },
- { -EILSEQ, "CRC/Timeout (bad cable?)" },
- { -ETIME, "Device does not respond to token" },
- { -ETIMEDOUT, "Device does not respond to command" },
- { -1, NULL }
-};
-
-/**********************************************************************
- * Memory management
- **********************************************************************/
-static void *
-rvmalloc(unsigned long size)
-{
- void *mem;
- unsigned long adr;
-
- size = PAGE_ALIGN(size);
- mem = vmalloc_32(size);
- if (!mem)
- return NULL;
-
- memset(mem, 0, size); /* Clear the ram out, no junk to the user */
- adr = (unsigned long) mem;
- while (size > 0) {
- SetPageReserved(vmalloc_to_page((void *)adr));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
-
- return mem;
-}
-
-static void
-rvfree(void *mem, unsigned long size)
-{
- unsigned long adr;
-
- if (!mem)
- return;
-
- adr = (unsigned long) mem;
- while ((long) size > 0) {
- ClearPageReserved(vmalloc_to_page((void *)adr));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
- vfree(mem);
-}
-
-/**********************************************************************
- *
- * Register I/O
- *
- **********************************************************************/
-
-/* Write an OV51x register */
-static int
-reg_w(struct usb_ov511 *ov, unsigned char reg, unsigned char value)
-{
- int rc;
-
- PDEBUG(5, "0x%02X:0x%02X", reg, value);
-
- mutex_lock(&ov->cbuf_lock);
- ov->cbuf[0] = value;
- rc = usb_control_msg(ov->dev,
- usb_sndctrlpipe(ov->dev, 0),
- (ov->bclass == BCL_OV518)?1:2 /* REG_IO */,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0, (__u16)reg, &ov->cbuf[0], 1, 1000);
- mutex_unlock(&ov->cbuf_lock);
-
- if (rc < 0)
- err("reg write: error %d: %s", rc, symbolic(urb_errlist, rc));
-
- return rc;
-}
-
-/* Read from an OV51x register */
-/* returns: negative is error, pos or zero is data */
-static int
-reg_r(struct usb_ov511 *ov, unsigned char reg)
-{
- int rc;
-
- mutex_lock(&ov->cbuf_lock);
- rc = usb_control_msg(ov->dev,
- usb_rcvctrlpipe(ov->dev, 0),
- (ov->bclass == BCL_OV518)?1:3 /* REG_IO */,
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0, (__u16)reg, &ov->cbuf[0], 1, 1000);
-
- if (rc < 0) {
- err("reg read: error %d: %s", rc, symbolic(urb_errlist, rc));
- } else {
- rc = ov->cbuf[0];
- PDEBUG(5, "0x%02X:0x%02X", reg, ov->cbuf[0]);
- }
-
- mutex_unlock(&ov->cbuf_lock);
-
- return rc;
-}
-
-/*
- * Writes bits at positions specified by mask to an OV51x reg. Bits that are in
- * the same position as 1's in "mask" are cleared and set to "value". Bits
- * that are in the same position as 0's in "mask" are preserved, regardless
- * of their respective state in "value".
- */
-static int
-reg_w_mask(struct usb_ov511 *ov,
- unsigned char reg,
- unsigned char value,
- unsigned char mask)
-{
- int ret;
- unsigned char oldval, newval;
-
- ret = reg_r(ov, reg);
- if (ret < 0)
- return ret;
-
- oldval = (unsigned char) ret;
- oldval &= (~mask); /* Clear the masked bits */
- value &= mask; /* Enforce mask on value */
- newval = oldval | value; /* Set the desired bits */
-
- return (reg_w(ov, reg, newval));
-}
-
-/*
- * Writes multiple (n) byte value to a single register. Only valid with certain
- * registers (0x30 and 0xc4 - 0xce).
- */
-static int
-ov518_reg_w32(struct usb_ov511 *ov, unsigned char reg, u32 val, int n)
-{
- int rc;
-
- PDEBUG(5, "0x%02X:%7d, n=%d", reg, val, n);
-
- mutex_lock(&ov->cbuf_lock);
-
- *((__le32 *)ov->cbuf) = __cpu_to_le32(val);
-
- rc = usb_control_msg(ov->dev,
- usb_sndctrlpipe(ov->dev, 0),
- 1 /* REG_IO */,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0, (__u16)reg, ov->cbuf, n, 1000);
- mutex_unlock(&ov->cbuf_lock);
-
- if (rc < 0)
- err("reg write multiple: error %d: %s", rc,
- symbolic(urb_errlist, rc));
-
- return rc;
-}
-
-static int
-ov511_upload_quan_tables(struct usb_ov511 *ov)
-{
- unsigned char *pYTable = yQuanTable511;
- unsigned char *pUVTable = uvQuanTable511;
- unsigned char val0, val1;
- int i, rc, reg = R511_COMP_LUT_BEGIN;
-
- PDEBUG(4, "Uploading quantization tables");
-
- for (i = 0; i < OV511_QUANTABLESIZE / 2; i++) {
- if (ENABLE_Y_QUANTABLE) {
- val0 = *pYTable++;
- val1 = *pYTable++;
- val0 &= 0x0f;
- val1 &= 0x0f;
- val0 |= val1 << 4;
- rc = reg_w(ov, reg, val0);
- if (rc < 0)
- return rc;
- }
-
- if (ENABLE_UV_QUANTABLE) {
- val0 = *pUVTable++;
- val1 = *pUVTable++;
- val0 &= 0x0f;
- val1 &= 0x0f;
- val0 |= val1 << 4;
- rc = reg_w(ov, reg + OV511_QUANTABLESIZE/2, val0);
- if (rc < 0)
- return rc;
- }
-
- reg++;
- }
-
- return 0;
-}
-
-/* OV518 quantization tables are 8x4 (instead of 8x8) */
-static int
-ov518_upload_quan_tables(struct usb_ov511 *ov)
-{
- unsigned char *pYTable = yQuanTable518;
- unsigned char *pUVTable = uvQuanTable518;
- unsigned char val0, val1;
- int i, rc, reg = R511_COMP_LUT_BEGIN;
-
- PDEBUG(4, "Uploading quantization tables");
-
- for (i = 0; i < OV518_QUANTABLESIZE / 2; i++) {
- if (ENABLE_Y_QUANTABLE) {
- val0 = *pYTable++;
- val1 = *pYTable++;
- val0 &= 0x0f;
- val1 &= 0x0f;
- val0 |= val1 << 4;
- rc = reg_w(ov, reg, val0);
- if (rc < 0)
- return rc;
- }
-
- if (ENABLE_UV_QUANTABLE) {
- val0 = *pUVTable++;
- val1 = *pUVTable++;
- val0 &= 0x0f;
- val1 &= 0x0f;
- val0 |= val1 << 4;
- rc = reg_w(ov, reg + OV518_QUANTABLESIZE/2, val0);
- if (rc < 0)
- return rc;
- }
-
- reg++;
- }
-
- return 0;
-}
-
-static int
-ov51x_reset(struct usb_ov511 *ov, unsigned char reset_type)
-{
- int rc;
-
- /* Setting bit 0 not allowed on 518/518Plus */
- if (ov->bclass == BCL_OV518)
- reset_type &= 0xfe;
-
- PDEBUG(4, "Reset: type=0x%02X", reset_type);
-
- rc = reg_w(ov, R51x_SYS_RESET, reset_type);
- rc = reg_w(ov, R51x_SYS_RESET, 0);
-
- if (rc < 0)
- err("reset: command failed");
-
- return rc;
-}
-
-/**********************************************************************
- *
- * Low-level I2C I/O functions
- *
- **********************************************************************/
-
-/* NOTE: Do not call this function directly!
- * The OV518 I2C I/O procedure is different, hence, this function.
- * This is normally only called from i2c_w(). Note that this function
- * always succeeds regardless of whether the sensor is present and working.
- */
-static int
-ov518_i2c_write_internal(struct usb_ov511 *ov,
- unsigned char reg,
- unsigned char value)
-{
- int rc;
-
- PDEBUG(5, "0x%02X:0x%02X", reg, value);
-
- /* Select camera register */
- rc = reg_w(ov, R51x_I2C_SADDR_3, reg);
- if (rc < 0)
- return rc;
-
- /* Write "value" to I2C data port of OV511 */
- rc = reg_w(ov, R51x_I2C_DATA, value);
- if (rc < 0)
- return rc;
-
- /* Initiate 3-byte write cycle */
- rc = reg_w(ov, R518_I2C_CTL, 0x01);
- if (rc < 0)
- return rc;
-
- return 0;
-}
-
-/* NOTE: Do not call this function directly! */
-static int
-ov511_i2c_write_internal(struct usb_ov511 *ov,
- unsigned char reg,
- unsigned char value)
-{
- int rc, retries;
-
- PDEBUG(5, "0x%02X:0x%02X", reg, value);
-
- /* Three byte write cycle */
- for (retries = OV511_I2C_RETRIES; ; ) {
- /* Select camera register */
- rc = reg_w(ov, R51x_I2C_SADDR_3, reg);
- if (rc < 0)
- break;
-
- /* Write "value" to I2C data port of OV511 */
- rc = reg_w(ov, R51x_I2C_DATA, value);
- if (rc < 0)
- break;
-
- /* Initiate 3-byte write cycle */
- rc = reg_w(ov, R511_I2C_CTL, 0x01);
- if (rc < 0)
- break;
-
- /* Retry until idle */
- do {
- rc = reg_r(ov, R511_I2C_CTL);
- } while (rc > 0 && ((rc&1) == 0));
- if (rc < 0)
- break;
-
- /* Ack? */
- if ((rc&2) == 0) {
- rc = 0;
- break;
- }
-#if 0
- /* I2C abort */
- reg_w(ov, R511_I2C_CTL, 0x10);
-#endif
- if (--retries < 0) {
- err("i2c write retries exhausted");
- rc = -1;
- break;
- }
- }
-
- return rc;
-}
-
-/* NOTE: Do not call this function directly!
- * The OV518 I2C I/O procedure is different, hence, this function.
- * This is normally only called from i2c_r(). Note that this function
- * always succeeds regardless of whether the sensor is present and working.
- */
-static int
-ov518_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg)
-{
- int rc, value;
-
- /* Select camera register */
- rc = reg_w(ov, R51x_I2C_SADDR_2, reg);
- if (rc < 0)
- return rc;
-
- /* Initiate 2-byte write cycle */
- rc = reg_w(ov, R518_I2C_CTL, 0x03);
- if (rc < 0)
- return rc;
-
- /* Initiate 2-byte read cycle */
- rc = reg_w(ov, R518_I2C_CTL, 0x05);
- if (rc < 0)
- return rc;
-
- value = reg_r(ov, R51x_I2C_DATA);
-
- PDEBUG(5, "0x%02X:0x%02X", reg, value);
-
- return value;
-}
-
-/* NOTE: Do not call this function directly!
- * returns: negative is error, pos or zero is data */
-static int
-ov511_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg)
-{
- int rc, value, retries;
-
- /* Two byte write cycle */
- for (retries = OV511_I2C_RETRIES; ; ) {
- /* Select camera register */
- rc = reg_w(ov, R51x_I2C_SADDR_2, reg);
- if (rc < 0)
- return rc;
-
- /* Initiate 2-byte write cycle */
- rc = reg_w(ov, R511_I2C_CTL, 0x03);
- if (rc < 0)
- return rc;
-
- /* Retry until idle */
- do {
- rc = reg_r(ov, R511_I2C_CTL);
- } while (rc > 0 && ((rc & 1) == 0));
- if (rc < 0)
- return rc;
-
- if ((rc&2) == 0) /* Ack? */
- break;
-
- /* I2C abort */
- reg_w(ov, R511_I2C_CTL, 0x10);
-
- if (--retries < 0) {
- err("i2c write retries exhausted");
- return -1;
- }
- }
-
- /* Two byte read cycle */
- for (retries = OV511_I2C_RETRIES; ; ) {
- /* Initiate 2-byte read cycle */
- rc = reg_w(ov, R511_I2C_CTL, 0x05);
- if (rc < 0)
- return rc;
-
- /* Retry until idle */
- do {
- rc = reg_r(ov, R511_I2C_CTL);
- } while (rc > 0 && ((rc&1) == 0));
- if (rc < 0)
- return rc;
-
- if ((rc&2) == 0) /* Ack? */
- break;
-
- /* I2C abort */
- rc = reg_w(ov, R511_I2C_CTL, 0x10);
- if (rc < 0)
- return rc;
-
- if (--retries < 0) {
- err("i2c read retries exhausted");
- return -1;
- }
- }
-
- value = reg_r(ov, R51x_I2C_DATA);
-
- PDEBUG(5, "0x%02X:0x%02X", reg, value);
-
- /* This is needed to make i2c_w() work */
- rc = reg_w(ov, R511_I2C_CTL, 0x05);
- if (rc < 0)
- return rc;
-
- return value;
-}
-
-/* returns: negative is error, pos or zero is data */
-static int
-i2c_r(struct usb_ov511 *ov, unsigned char reg)
-{
- int rc;
-
- mutex_lock(&ov->i2c_lock);
-
- if (ov->bclass == BCL_OV518)
- rc = ov518_i2c_read_internal(ov, reg);
- else
- rc = ov511_i2c_read_internal(ov, reg);
-
- mutex_unlock(&ov->i2c_lock);
-
- return rc;
-}
-
-static int
-i2c_w(struct usb_ov511 *ov, unsigned char reg, unsigned char value)
-{
- int rc;
-
- mutex_lock(&ov->i2c_lock);
-
- if (ov->bclass == BCL_OV518)
- rc = ov518_i2c_write_internal(ov, reg, value);
- else
- rc = ov511_i2c_write_internal(ov, reg, value);
-
- mutex_unlock(&ov->i2c_lock);
-
- return rc;
-}
-
-/* Do not call this function directly! */
-static int
-ov51x_i2c_write_mask_internal(struct usb_ov511 *ov,
- unsigned char reg,
- unsigned char value,
- unsigned char mask)
-{
- int rc;
- unsigned char oldval, newval;
-
- if (mask == 0xff) {
- newval = value;
- } else {
- if (ov->bclass == BCL_OV518)
- rc = ov518_i2c_read_internal(ov, reg);
- else
- rc = ov511_i2c_read_internal(ov, reg);
- if (rc < 0)
- return rc;
-
- oldval = (unsigned char) rc;
- oldval &= (~mask); /* Clear the masked bits */
- value &= mask; /* Enforce mask on value */
- newval = oldval | value; /* Set the desired bits */
- }
-
- if (ov->bclass == BCL_OV518)
- return (ov518_i2c_write_internal(ov, reg, newval));
- else
- return (ov511_i2c_write_internal(ov, reg, newval));
-}
-
-/* Writes bits at positions specified by mask to an I2C reg. Bits that are in
- * the same position as 1's in "mask" are cleared and set to "value". Bits
- * that are in the same position as 0's in "mask" are preserved, regardless
- * of their respective state in "value".
- */
-static int
-i2c_w_mask(struct usb_ov511 *ov,
- unsigned char reg,
- unsigned char value,
- unsigned char mask)
-{
- int rc;
-
- mutex_lock(&ov->i2c_lock);
- rc = ov51x_i2c_write_mask_internal(ov, reg, value, mask);
- mutex_unlock(&ov->i2c_lock);
-
- return rc;
-}
-
-/* Set the read and write slave IDs. The "slave" argument is the write slave,
- * and the read slave will be set to (slave + 1). ov->i2c_lock should be held
- * when calling this. This should not be called from outside the i2c I/O
- * functions.
- */
-static int
-i2c_set_slave_internal(struct usb_ov511 *ov, unsigned char slave)
-{
- int rc;
-
- rc = reg_w(ov, R51x_I2C_W_SID, slave);
- if (rc < 0)
- return rc;
-
- rc = reg_w(ov, R51x_I2C_R_SID, slave + 1);
- if (rc < 0)
- return rc;
-
- return 0;
-}
-
-/* Write to a specific I2C slave ID and register, using the specified mask */
-static int
-i2c_w_slave(struct usb_ov511 *ov,
- unsigned char slave,
- unsigned char reg,
- unsigned char value,
- unsigned char mask)
-{
- int rc = 0;
-
- mutex_lock(&ov->i2c_lock);
-
- /* Set new slave IDs */
- rc = i2c_set_slave_internal(ov, slave);
- if (rc < 0)
- goto out;
-
- rc = ov51x_i2c_write_mask_internal(ov, reg, value, mask);
-
-out:
- /* Restore primary IDs */
- if (i2c_set_slave_internal(ov, ov->primary_i2c_slave) < 0)
- err("Couldn't restore primary I2C slave");
-
- mutex_unlock(&ov->i2c_lock);
- return rc;
-}
-
-/* Read from a specific I2C slave ID and register */
-static int
-i2c_r_slave(struct usb_ov511 *ov,
- unsigned char slave,
- unsigned char reg)
-{
- int rc;
-
- mutex_lock(&ov->i2c_lock);
-
- /* Set new slave IDs */
- rc = i2c_set_slave_internal(ov, slave);
- if (rc < 0)
- goto out;
-
- if (ov->bclass == BCL_OV518)
- rc = ov518_i2c_read_internal(ov, reg);
- else
- rc = ov511_i2c_read_internal(ov, reg);
-
-out:
- /* Restore primary IDs */
- if (i2c_set_slave_internal(ov, ov->primary_i2c_slave) < 0)
- err("Couldn't restore primary I2C slave");
-
- mutex_unlock(&ov->i2c_lock);
- return rc;
-}
-
-/* Sets I2C read and write slave IDs. Returns <0 for error */
-static int
-ov51x_set_slave_ids(struct usb_ov511 *ov, unsigned char sid)
-{
- int rc;
-
- mutex_lock(&ov->i2c_lock);
-
- rc = i2c_set_slave_internal(ov, sid);
- if (rc < 0)
- goto out;
-
- // FIXME: Is this actually necessary?
- rc = ov51x_reset(ov, OV511_RESET_NOREGS);
-out:
- mutex_unlock(&ov->i2c_lock);
- return rc;
-}
-
-static int
-write_regvals(struct usb_ov511 *ov, struct ov511_regvals * pRegvals)
-{
- int rc;
-
- while (pRegvals->bus != OV511_DONE_BUS) {
- if (pRegvals->bus == OV511_REG_BUS) {
- if ((rc = reg_w(ov, pRegvals->reg, pRegvals->val)) < 0)
- return rc;
- } else if (pRegvals->bus == OV511_I2C_BUS) {
- if ((rc = i2c_w(ov, pRegvals->reg, pRegvals->val)) < 0)
- return rc;
- } else {
- err("Bad regval array");
- return -1;
- }
- pRegvals++;
- }
- return 0;
-}
-
-#ifdef OV511_DEBUG
-static void
-dump_i2c_range(struct usb_ov511 *ov, int reg1, int regn)
-{
- int i, rc;
-
- for (i = reg1; i <= regn; i++) {
- rc = i2c_r(ov, i);
- dev_info(&ov->dev->dev, "Sensor[0x%02X] = 0x%02X\n", i, rc);
- }
-}
-
-static void
-dump_i2c_regs(struct usb_ov511 *ov)
-{
- dev_info(&ov->dev->dev, "I2C REGS\n");
- dump_i2c_range(ov, 0x00, 0x7C);
-}
-
-static void
-dump_reg_range(struct usb_ov511 *ov, int reg1, int regn)
-{
- int i, rc;
-
- for (i = reg1; i <= regn; i++) {
- rc = reg_r(ov, i);
- dev_info(&ov->dev->dev, "OV511[0x%02X] = 0x%02X\n", i, rc);
- }
-}
-
-static void
-ov511_dump_regs(struct usb_ov511 *ov)
-{
- dev_info(&ov->dev->dev, "CAMERA INTERFACE REGS\n");
- dump_reg_range(ov, 0x10, 0x1f);
- dev_info(&ov->dev->dev, "DRAM INTERFACE REGS\n");
- dump_reg_range(ov, 0x20, 0x23);
- dev_info(&ov->dev->dev, "ISO FIFO REGS\n");
- dump_reg_range(ov, 0x30, 0x31);
- dev_info(&ov->dev->dev, "PIO REGS\n");
- dump_reg_range(ov, 0x38, 0x39);
- dump_reg_range(ov, 0x3e, 0x3e);
- dev_info(&ov->dev->dev, "I2C REGS\n");
- dump_reg_range(ov, 0x40, 0x49);
- dev_info(&ov->dev->dev, "SYSTEM CONTROL REGS\n");
- dump_reg_range(ov, 0x50, 0x55);
- dump_reg_range(ov, 0x5e, 0x5f);
- dev_info(&ov->dev->dev, "OmniCE REGS\n");
- dump_reg_range(ov, 0x70, 0x79);
- /* NOTE: Quantization tables are not readable. You will get the value
- * in reg. 0x79 for every table register */
- dump_reg_range(ov, 0x80, 0x9f);
- dump_reg_range(ov, 0xa0, 0xbf);
-
-}
-
-static void
-ov518_dump_regs(struct usb_ov511 *ov)
-{
- dev_info(&ov->dev->dev, "VIDEO MODE REGS\n");
- dump_reg_range(ov, 0x20, 0x2f);
- dev_info(&ov->dev->dev, "DATA PUMP AND SNAPSHOT REGS\n");
- dump_reg_range(ov, 0x30, 0x3f);
- dev_info(&ov->dev->dev, "I2C REGS\n");
- dump_reg_range(ov, 0x40, 0x4f);
- dev_info(&ov->dev->dev, "SYSTEM CONTROL AND VENDOR REGS\n");
- dump_reg_range(ov, 0x50, 0x5f);
- dev_info(&ov->dev->dev, "60 - 6F\n");
- dump_reg_range(ov, 0x60, 0x6f);
- dev_info(&ov->dev->dev, "70 - 7F\n");
- dump_reg_range(ov, 0x70, 0x7f);
- dev_info(&ov->dev->dev, "Y QUANTIZATION TABLE\n");
- dump_reg_range(ov, 0x80, 0x8f);
- dev_info(&ov->dev->dev, "UV QUANTIZATION TABLE\n");
- dump_reg_range(ov, 0x90, 0x9f);
- dev_info(&ov->dev->dev, "A0 - BF\n");
- dump_reg_range(ov, 0xa0, 0xbf);
- dev_info(&ov->dev->dev, "CBR\n");
- dump_reg_range(ov, 0xc0, 0xcf);
-}
-#endif
-
-/*****************************************************************************/
-
-/* Temporarily stops OV511 from functioning. Must do this before changing
- * registers while the camera is streaming */
-static inline int
-ov51x_stop(struct usb_ov511 *ov)
-{
- PDEBUG(4, "stopping");
- ov->stopped = 1;
- if (ov->bclass == BCL_OV518)
- return (reg_w_mask(ov, R51x_SYS_RESET, 0x3a, 0x3a));
- else
- return (reg_w(ov, R51x_SYS_RESET, 0x3d));
-}
-
-/* Restarts OV511 after ov511_stop() is called. Has no effect if it is not
- * actually stopped (for performance). */
-static inline int
-ov51x_restart(struct usb_ov511 *ov)
-{
- if (ov->stopped) {
- PDEBUG(4, "restarting");
- ov->stopped = 0;
-
- /* Reinitialize the stream */
- if (ov->bclass == BCL_OV518)
- reg_w(ov, 0x2f, 0x80);
-
- return (reg_w(ov, R51x_SYS_RESET, 0x00));
- }
-
- return 0;
-}
-
-/* Sleeps until no frames are active. Returns !0 if got signal */
-static int
-ov51x_wait_frames_inactive(struct usb_ov511 *ov)
-{
- return wait_event_interruptible(ov->wq, ov->curframe < 0);
-}
-
-/* Resets the hardware snapshot button */
-static void
-ov51x_clear_snapshot(struct usb_ov511 *ov)
-{
- if (ov->bclass == BCL_OV511) {
- reg_w(ov, R51x_SYS_SNAP, 0x00);
- reg_w(ov, R51x_SYS_SNAP, 0x02);
- reg_w(ov, R51x_SYS_SNAP, 0x00);
- } else if (ov->bclass == BCL_OV518) {
- dev_warn(&ov->dev->dev,
- "snapshot reset not supported yet on OV518(+)\n");
- } else {
- dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n");
- }
-}
-
-#if 0
-/* Checks the status of the snapshot button. Returns 1 if it was pressed since
- * it was last cleared, and zero in all other cases (including errors) */
-static int
-ov51x_check_snapshot(struct usb_ov511 *ov)
-{
- int ret, status = 0;
-
- if (ov->bclass == BCL_OV511) {
- ret = reg_r(ov, R51x_SYS_SNAP);
- if (ret < 0) {
- dev_err(&ov->dev->dev,
- "Error checking snspshot status (%d)\n", ret);
- } else if (ret & 0x08) {
- status = 1;
- }
- } else if (ov->bclass == BCL_OV518) {
- dev_warn(&ov->dev->dev,
- "snapshot check not supported yet on OV518(+)\n");
- } else {
- dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n");
- }
-
- return status;
-}
-#endif
-
-/* This does an initial reset of an OmniVision sensor and ensures that I2C
- * is synchronized. Returns <0 for failure.
- */
-static int
-init_ov_sensor(struct usb_ov511 *ov)
-{
- int i, success;
-
- /* Reset the sensor */
- if (i2c_w(ov, 0x12, 0x80) < 0)
- return -EIO;
-
- /* Wait for it to initialize */
- msleep(150);
-
- for (i = 0, success = 0; i < i2c_detect_tries && !success; i++) {
- if ((i2c_r(ov, OV7610_REG_ID_HIGH) == 0x7F) &&
- (i2c_r(ov, OV7610_REG_ID_LOW) == 0xA2)) {
- success = 1;
- continue;
- }
-
- /* Reset the sensor */
- if (i2c_w(ov, 0x12, 0x80) < 0)
- return -EIO;
- /* Wait for it to initialize */
- msleep(150);
- /* Dummy read to sync I2C */
- if (i2c_r(ov, 0x00) < 0)
- return -EIO;
- }
-
- if (!success)
- return -EIO;
-
- PDEBUG(1, "I2C synced in %d attempt(s)", i);
-
- return 0;
-}
-
-static int
-ov511_set_packet_size(struct usb_ov511 *ov, int size)
-{
- int alt, mult;
-
- if (ov51x_stop(ov) < 0)
- return -EIO;
-
- mult = size >> 5;
-
- if (ov->bridge == BRG_OV511) {
- if (size == 0)
- alt = OV511_ALT_SIZE_0;
- else if (size == 257)
- alt = OV511_ALT_SIZE_257;
- else if (size == 513)
- alt = OV511_ALT_SIZE_513;
- else if (size == 769)
- alt = OV511_ALT_SIZE_769;
- else if (size == 993)
- alt = OV511_ALT_SIZE_993;
- else {
- err("Set packet size: invalid size (%d)", size);
- return -EINVAL;
- }
- } else if (ov->bridge == BRG_OV511PLUS) {
- if (size == 0)
- alt = OV511PLUS_ALT_SIZE_0;
- else if (size == 33)
- alt = OV511PLUS_ALT_SIZE_33;
- else if (size == 129)
- alt = OV511PLUS_ALT_SIZE_129;
- else if (size == 257)
- alt = OV511PLUS_ALT_SIZE_257;
- else if (size == 385)
- alt = OV511PLUS_ALT_SIZE_385;
- else if (size == 513)
- alt = OV511PLUS_ALT_SIZE_513;
- else if (size == 769)
- alt = OV511PLUS_ALT_SIZE_769;
- else if (size == 961)
- alt = OV511PLUS_ALT_SIZE_961;
- else {
- err("Set packet size: invalid size (%d)", size);
- return -EINVAL;
- }
- } else {
- err("Set packet size: Invalid bridge type");
- return -EINVAL;
- }
-
- PDEBUG(3, "%d, mult=%d, alt=%d", size, mult, alt);
-
- if (reg_w(ov, R51x_FIFO_PSIZE, mult) < 0)
- return -EIO;
-
- if (usb_set_interface(ov->dev, ov->iface, alt) < 0) {
- err("Set packet size: set interface error");
- return -EBUSY;
- }
-
- if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0)
- return -EIO;
-
- ov->packet_size = size;
-
- if (ov51x_restart(ov) < 0)
- return -EIO;
-
- return 0;
-}
-
-/* Note: Unlike the OV511/OV511+, the size argument does NOT include the
- * optional packet number byte. The actual size *is* stored in ov->packet_size,
- * though. */
-static int
-ov518_set_packet_size(struct usb_ov511 *ov, int size)
-{
- int alt;
-
- if (ov51x_stop(ov) < 0)
- return -EIO;
-
- if (ov->bclass == BCL_OV518) {
- if (size == 0)
- alt = OV518_ALT_SIZE_0;
- else if (size == 128)
- alt = OV518_ALT_SIZE_128;
- else if (size == 256)
- alt = OV518_ALT_SIZE_256;
- else if (size == 384)
- alt = OV518_ALT_SIZE_384;
- else if (size == 512)
- alt = OV518_ALT_SIZE_512;
- else if (size == 640)
- alt = OV518_ALT_SIZE_640;
- else if (size == 768)
- alt = OV518_ALT_SIZE_768;
- else if (size == 896)
- alt = OV518_ALT_SIZE_896;
- else {
- err("Set packet size: invalid size (%d)", size);
- return -EINVAL;
- }
- } else {
- err("Set packet size: Invalid bridge type");
- return -EINVAL;
- }
-
- PDEBUG(3, "%d, alt=%d", size, alt);
-
- ov->packet_size = size;
- if (size > 0) {
- /* Program ISO FIFO size reg (packet number isn't included) */
- ov518_reg_w32(ov, 0x30, size, 2);
-
- if (ov->packet_numbering)
- ++ov->packet_size;
- }
-
- if (usb_set_interface(ov->dev, ov->iface, alt) < 0) {
- err("Set packet size: set interface error");
- return -EBUSY;
- }
-
- /* Initialize the stream */
- if (reg_w(ov, 0x2f, 0x80) < 0)
- return -EIO;
-
- if (ov51x_restart(ov) < 0)
- return -EIO;
-
- if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0)
- return -EIO;
-
- return 0;
-}
-
-/* Upload compression params and quantization tables. Returns 0 for success. */
-static int
-ov511_init_compression(struct usb_ov511 *ov)
-{
- int rc = 0;
-
- if (!ov->compress_inited) {
- reg_w(ov, 0x70, phy);
- reg_w(ov, 0x71, phuv);
- reg_w(ov, 0x72, pvy);
- reg_w(ov, 0x73, pvuv);
- reg_w(ov, 0x74, qhy);
- reg_w(ov, 0x75, qhuv);
- reg_w(ov, 0x76, qvy);
- reg_w(ov, 0x77, qvuv);
-
- if (ov511_upload_quan_tables(ov) < 0) {
- err("Error uploading quantization tables");
- rc = -EIO;
- goto out;
- }
- }
-
- ov->compress_inited = 1;
-out:
- return rc;
-}
-
-/* Upload compression params and quantization tables. Returns 0 for success. */
-static int
-ov518_init_compression(struct usb_ov511 *ov)
-{
- int rc = 0;
-
- if (!ov->compress_inited) {
- if (ov518_upload_quan_tables(ov) < 0) {
- err("Error uploading quantization tables");
- rc = -EIO;
- goto out;
- }
- }
-
- ov->compress_inited = 1;
-out:
- return rc;
-}
-
-/* -------------------------------------------------------------------------- */
-
-/* Sets sensor's contrast setting to "val" */
-static int
-sensor_set_contrast(struct usb_ov511 *ov, unsigned short val)
-{
- int rc;
-
- PDEBUG(3, "%d", val);
-
- if (ov->stop_during_set)
- if (ov51x_stop(ov) < 0)
- return -EIO;
-
- switch (ov->sensor) {
- case SEN_OV7610:
- case SEN_OV6620:
- {
- rc = i2c_w(ov, OV7610_REG_CNT, val >> 8);
- if (rc < 0)
- goto out;
- break;
- }
- case SEN_OV6630:
- {
- rc = i2c_w_mask(ov, OV7610_REG_CNT, val >> 12, 0x0f);
- if (rc < 0)
- goto out;
- break;
- }
- case SEN_OV7620:
- {
- unsigned char ctab[] = {
- 0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57,
- 0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff
- };
-
- /* Use Y gamma control instead. Bit 0 enables it. */
- rc = i2c_w(ov, 0x64, ctab[val>>12]);
- if (rc < 0)
- goto out;
- break;
- }
- case SEN_SAA7111A:
- {
- rc = i2c_w(ov, 0x0b, val >> 9);
- if (rc < 0)
- goto out;
- break;
- }
- default:
- {
- PDEBUG(3, "Unsupported with this sensor");
- rc = -EPERM;
- goto out;
- }
- }
-
- rc = 0; /* Success */
- ov->contrast = val;
-out:
- if (ov51x_restart(ov) < 0)
- return -EIO;
-
- return rc;
-}
-
-/* Gets sensor's contrast setting */
-static int
-sensor_get_contrast(struct usb_ov511 *ov, unsigned short *val)
-{
- int rc;
-
- switch (ov->sensor) {
- case SEN_OV7610:
- case SEN_OV6620:
- rc = i2c_r(ov, OV7610_REG_CNT);
- if (rc < 0)
- return rc;
- else
- *val = rc << 8;
- break;
- case SEN_OV6630:
- rc = i2c_r(ov, OV7610_REG_CNT);
- if (rc < 0)
- return rc;
- else
- *val = rc << 12;
- break;
- case SEN_OV7620:
- /* Use Y gamma reg instead. Bit 0 is the enable bit. */
- rc = i2c_r(ov, 0x64);
- if (rc < 0)
- return rc;
- else
- *val = (rc & 0xfe) << 8;
- break;
- case SEN_SAA7111A:
- *val = ov->contrast;
- break;
- default:
- PDEBUG(3, "Unsupported with this sensor");
- return -EPERM;
- }
-
- PDEBUG(3, "%d", *val);
- ov->contrast = *val;
-
- return 0;
-}
-
-/* -------------------------------------------------------------------------- */
-
-/* Sets sensor's brightness setting to "val" */
-static int
-sensor_set_brightness(struct usb_ov511 *ov, unsigned short val)
-{
- int rc;
-
- PDEBUG(4, "%d", val);
-
- if (ov->stop_during_set)
- if (ov51x_stop(ov) < 0)
- return -EIO;
-
- switch (ov->sensor) {
- case SEN_OV7610:
- case SEN_OV76BE:
- case SEN_OV6620:
- case SEN_OV6630:
- rc = i2c_w(ov, OV7610_REG_BRT, val >> 8);
- if (rc < 0)
- goto out;
- break;
- case SEN_OV7620:
- /* 7620 doesn't like manual changes when in auto mode */
- if (!ov->auto_brt) {
- rc = i2c_w(ov, OV7610_REG_BRT, val >> 8);
- if (rc < 0)
- goto out;
- }
- break;
- case SEN_SAA7111A:
- rc = i2c_w(ov, 0x0a, val >> 8);
- if (rc < 0)
- goto out;
- break;
- default:
- PDEBUG(3, "Unsupported with this sensor");
- rc = -EPERM;
- goto out;
- }
-
- rc = 0; /* Success */
- ov->brightness = val;
-out:
- if (ov51x_restart(ov) < 0)
- return -EIO;
-
- return rc;
-}
-
-/* Gets sensor's brightness setting */
-static int
-sensor_get_brightness(struct usb_ov511 *ov, unsigned short *val)
-{
- int rc;
-
- switch (ov->sensor) {
- case SEN_OV7610:
- case SEN_OV76BE:
- case SEN_OV7620:
- case SEN_OV6620:
- case SEN_OV6630:
- rc = i2c_r(ov, OV7610_REG_BRT);
- if (rc < 0)
- return rc;
- else
- *val = rc << 8;
- break;
- case SEN_SAA7111A:
- *val = ov->brightness;
- break;
- default:
- PDEBUG(3, "Unsupported with this sensor");
- return -EPERM;
- }
-
- PDEBUG(3, "%d", *val);
- ov->brightness = *val;
-
- return 0;
-}
-
-/* -------------------------------------------------------------------------- */
-
-/* Sets sensor's saturation (color intensity) setting to "val" */
-static int
-sensor_set_saturation(struct usb_ov511 *ov, unsigned short val)
-{
- int rc;
-
- PDEBUG(3, "%d", val);
-
- if (ov->stop_during_set)
- if (ov51x_stop(ov) < 0)
- return -EIO;
-
- switch (ov->sensor) {
- case SEN_OV7610:
- case SEN_OV76BE:
- case SEN_OV6620:
- case SEN_OV6630:
- rc = i2c_w(ov, OV7610_REG_SAT, val >> 8);
- if (rc < 0)
- goto out;
- break;
- case SEN_OV7620:
-// /* Use UV gamma control instead. Bits 0 & 7 are reserved. */
-// rc = ov_i2c_write(ov->dev, 0x62, (val >> 9) & 0x7e);
-// if (rc < 0)
-// goto out;
- rc = i2c_w(ov, OV7610_REG_SAT, val >> 8);
- if (rc < 0)
- goto out;
- break;
- case SEN_SAA7111A:
- rc = i2c_w(ov, 0x0c, val >> 9);
- if (rc < 0)
- goto out;
- break;
- default:
- PDEBUG(3, "Unsupported with this sensor");
- rc = -EPERM;
- goto out;
- }
-
- rc = 0; /* Success */
- ov->colour = val;
-out:
- if (ov51x_restart(ov) < 0)
- return -EIO;
-
- return rc;
-}
-
-/* Gets sensor's saturation (color intensity) setting */
-static int
-sensor_get_saturation(struct usb_ov511 *ov, unsigned short *val)
-{
- int rc;
-
- switch (ov->sensor) {
- case SEN_OV7610:
- case SEN_OV76BE:
- case SEN_OV6620:
- case SEN_OV6630:
- rc = i2c_r(ov, OV7610_REG_SAT);
- if (rc < 0)
- return rc;
- else
- *val = rc << 8;
- break;
- case SEN_OV7620:
-// /* Use UV gamma reg instead. Bits 0 & 7 are reserved. */
-// rc = i2c_r(ov, 0x62);
-// if (rc < 0)
-// return rc;
-// else
-// *val = (rc & 0x7e) << 9;
- rc = i2c_r(ov, OV7610_REG_SAT);
- if (rc < 0)
- return rc;
- else
- *val = rc << 8;
- break;
- case SEN_SAA7111A:
- *val = ov->colour;
- break;
- default:
- PDEBUG(3, "Unsupported with this sensor");
- return -EPERM;
- }
-
- PDEBUG(3, "%d", *val);
- ov->colour = *val;
-
- return 0;
-}
-
-/* -------------------------------------------------------------------------- */
-
-/* Sets sensor's hue (red/blue balance) setting to "val" */
-static int
-sensor_set_hue(struct usb_ov511 *ov, unsigned short val)
-{
- int rc;
-
- PDEBUG(3, "%d", val);
-
- if (ov->stop_during_set)
- if (ov51x_stop(ov) < 0)
- return -EIO;
-
- switch (ov->sensor) {
- case SEN_OV7610:
- case SEN_OV6620:
- case SEN_OV6630:
- rc = i2c_w(ov, OV7610_REG_RED, 0xFF - (val >> 8));
- if (rc < 0)
- goto out;
-
- rc = i2c_w(ov, OV7610_REG_BLUE, val >> 8);
- if (rc < 0)
- goto out;
- break;
- case SEN_OV7620:
-// Hue control is causing problems. I will enable it once it's fixed.
-#if 0
- rc = i2c_w(ov, 0x7a, (unsigned char)(val >> 8) + 0xb);
- if (rc < 0)
- goto out;
-
- rc = i2c_w(ov, 0x79, (unsigned char)(val >> 8) + 0xb);
- if (rc < 0)
- goto out;
-#endif
- break;
- case SEN_SAA7111A:
- rc = i2c_w(ov, 0x0d, (val + 32768) >> 8);
- if (rc < 0)
- goto out;
- break;
- default:
- PDEBUG(3, "Unsupported with this sensor");
- rc = -EPERM;
- goto out;
- }
-
- rc = 0; /* Success */
- ov->hue = val;
-out:
- if (ov51x_restart(ov) < 0)
- return -EIO;
-
- return rc;
-}
-
-/* Gets sensor's hue (red/blue balance) setting */
-static int
-sensor_get_hue(struct usb_ov511 *ov, unsigned short *val)
-{
- int rc;
-
- switch (ov->sensor) {
- case SEN_OV7610:
- case SEN_OV6620:
- case SEN_OV6630:
- rc = i2c_r(ov, OV7610_REG_BLUE);
- if (rc < 0)
- return rc;
- else
- *val = rc << 8;
- break;
- case SEN_OV7620:
- rc = i2c_r(ov, 0x7a);
- if (rc < 0)
- return rc;
- else
- *val = rc << 8;
- break;
- case SEN_SAA7111A:
- *val = ov->hue;
- break;
- default:
- PDEBUG(3, "Unsupported with this sensor");
- return -EPERM;
- }
-
- PDEBUG(3, "%d", *val);
- ov->hue = *val;
-
- return 0;
-}
-
-/* -------------------------------------------------------------------------- */
-
-static int
-sensor_set_picture(struct usb_ov511 *ov, struct video_picture *p)
-{
- int rc;
-
- PDEBUG(4, "sensor_set_picture");
-
- ov->whiteness = p->whiteness;
-
- /* Don't return error if a setting is unsupported, or rest of settings
- * will not be performed */
-
- rc = sensor_set_contrast(ov, p->contrast);
- if (FATAL_ERROR(rc))
- return rc;
-
- rc = sensor_set_brightness(ov, p->brightness);
- if (FATAL_ERROR(rc))
- return rc;
-
- rc = sensor_set_saturation(ov, p->colour);
- if (FATAL_ERROR(rc))
- return rc;
-
- rc = sensor_set_hue(ov, p->hue);
- if (FATAL_ERROR(rc))
- return rc;
-
- return 0;
-}
-
-static int
-sensor_get_picture(struct usb_ov511 *ov, struct video_picture *p)
-{
- int rc;
-
- PDEBUG(4, "sensor_get_picture");
-
- /* Don't return error if a setting is unsupported, or rest of settings
- * will not be performed */
-
- rc = sensor_get_contrast(ov, &(p->contrast));
- if (FATAL_ERROR(rc))
- return rc;
-
- rc = sensor_get_brightness(ov, &(p->brightness));
- if (FATAL_ERROR(rc))
- return rc;
-
- rc = sensor_get_saturation(ov, &(p->colour));
- if (FATAL_ERROR(rc))
- return rc;
-
- rc = sensor_get_hue(ov, &(p->hue));
- if (FATAL_ERROR(rc))
- return rc;
-
- p->whiteness = 105 << 8;
-
- return 0;
-}
-
-#if 0
-// FIXME: Exposure range is only 0x00-0x7f in interlace mode
-/* Sets current exposure for sensor. This only has an effect if auto-exposure
- * is off */
-static inline int
-sensor_set_exposure(struct usb_ov511 *ov, unsigned char val)
-{
- int rc;
-
- PDEBUG(3, "%d", val);
-
- if (ov->stop_during_set)
- if (ov51x_stop(ov) < 0)
- return -EIO;
-
- switch (ov->sensor) {
- case SEN_OV6620:
- case SEN_OV6630:
- case SEN_OV7610:
- case SEN_OV7620:
- case SEN_OV76BE:
- case SEN_OV8600:
- rc = i2c_w(ov, 0x10, val);
- if (rc < 0)
- goto out;
-
- break;
- case SEN_KS0127:
- case SEN_KS0127B:
- case SEN_SAA7111A:
- PDEBUG(3, "Unsupported with this sensor");
- return -EPERM;
- default:
- err("Sensor not supported for set_exposure");
- return -EINVAL;
- }
-
- rc = 0; /* Success */
- ov->exposure = val;
-out:
- if (ov51x_restart(ov) < 0)
- return -EIO;
-
- return rc;
-}
-#endif
-
-/* Gets current exposure level from sensor, regardless of whether it is under
- * manual control. */
-static int
-sensor_get_exposure(struct usb_ov511 *ov, unsigned char *val)
-{
- int rc;
-
- switch (ov->sensor) {
- case SEN_OV7610:
- case SEN_OV6620:
- case SEN_OV6630:
- case SEN_OV7620:
- case SEN_OV76BE:
- case SEN_OV8600:
- rc = i2c_r(ov, 0x10);
- if (rc < 0)
- return rc;
- else
- *val = rc;
- break;
- case SEN_KS0127:
- case SEN_KS0127B:
- case SEN_SAA7111A:
- val = NULL;
- PDEBUG(3, "Unsupported with this sensor");
- return -EPERM;
- default:
- err("Sensor not supported for get_exposure");
- return -EINVAL;
- }
-
- PDEBUG(3, "%d", *val);
- ov->exposure = *val;
-
- return 0;
-}
-
-/* Turns on or off the LED. Only has an effect with OV511+/OV518(+) */
-static void
-ov51x_led_control(struct usb_ov511 *ov, int enable)
-{
- PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
-
- if (ov->bridge == BRG_OV511PLUS)
- reg_w(ov, R511_SYS_LED_CTL, enable ? 1 : 0);
- else if (ov->bclass == BCL_OV518)
- reg_w_mask(ov, R518_GPIO_OUT, enable ? 0x02 : 0x00, 0x02);
-
- return;
-}
-
-/* Matches the sensor's internal frame rate to the lighting frequency.
- * Valid frequencies are:
- * 50 - 50Hz, for European and Asian lighting
- * 60 - 60Hz, for American lighting
- *
- * Tested with: OV7610, OV7620, OV76BE, OV6620
- * Unsupported: KS0127, KS0127B, SAA7111A
- * Returns: 0 for success
- */
-static int
-sensor_set_light_freq(struct usb_ov511 *ov, int freq)
-{
- int sixty;
-
- PDEBUG(4, "%d Hz", freq);
-
- if (freq == 60)
- sixty = 1;
- else if (freq == 50)
- sixty = 0;
- else {
- err("Invalid light freq (%d Hz)", freq);
- return -EINVAL;
- }
-
- switch (ov->sensor) {
- case SEN_OV7610:
- i2c_w_mask(ov, 0x2a, sixty?0x00:0x80, 0x80);
- i2c_w(ov, 0x2b, sixty?0x00:0xac);
- i2c_w_mask(ov, 0x13, 0x10, 0x10);
- i2c_w_mask(ov, 0x13, 0x00, 0x10);
- break;
- case SEN_OV7620:
- case SEN_OV76BE:
- case SEN_OV8600:
- i2c_w_mask(ov, 0x2a, sixty?0x00:0x80, 0x80);
- i2c_w(ov, 0x2b, sixty?0x00:0xac);
- i2c_w_mask(ov, 0x76, 0x01, 0x01);
- break;
- case SEN_OV6620:
- case SEN_OV6630:
- i2c_w(ov, 0x2b, sixty?0xa8:0x28);
- i2c_w(ov, 0x2a, sixty?0x84:0xa4);
- break;
- case SEN_KS0127:
- case SEN_KS0127B:
- case SEN_SAA7111A:
- PDEBUG(5, "Unsupported with this sensor");
- return -EPERM;
- default:
- err("Sensor not supported for set_light_freq");
- return -EINVAL;
- }
-
- ov->lightfreq = freq;
-
- return 0;
-}
-
-/* If enable is true, turn on the sensor's banding filter, otherwise turn it
- * off. This filter tries to reduce the pattern of horizontal light/dark bands
- * caused by some (usually fluorescent) lighting. The light frequency must be
- * set either before or after enabling it with ov51x_set_light_freq().
- *
- * Tested with: OV7610, OV7620, OV76BE, OV6620.
- * Unsupported: KS0127, KS0127B, SAA7111A
- * Returns: 0 for success
- */
-static int
-sensor_set_banding_filter(struct usb_ov511 *ov, int enable)
-{
- int rc;
-
- PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
-
- if (ov->sensor == SEN_KS0127 || ov->sensor == SEN_KS0127B
- || ov->sensor == SEN_SAA7111A) {
- PDEBUG(5, "Unsupported with this sensor");
- return -EPERM;
- }
-
- rc = i2c_w_mask(ov, 0x2d, enable?0x04:0x00, 0x04);
- if (rc < 0)
- return rc;
-
- ov->bandfilt = enable;
-
- return 0;
-}
-
-/* If enable is true, turn on the sensor's auto brightness control, otherwise
- * turn it off.
- *
- * Unsupported: KS0127, KS0127B, SAA7111A
- * Returns: 0 for success
- */
-static int
-sensor_set_auto_brightness(struct usb_ov511 *ov, int enable)
-{
- int rc;
-
- PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
-
- if (ov->sensor == SEN_KS0127 || ov->sensor == SEN_KS0127B
- || ov->sensor == SEN_SAA7111A) {
- PDEBUG(5, "Unsupported with this sensor");
- return -EPERM;
- }
-
- rc = i2c_w_mask(ov, 0x2d, enable?0x10:0x00, 0x10);
- if (rc < 0)
- return rc;
-
- ov->auto_brt = enable;
-
- return 0;
-}
-
-/* If enable is true, turn on the sensor's auto exposure control, otherwise
- * turn it off.
- *
- * Unsupported: KS0127, KS0127B, SAA7111A
- * Returns: 0 for success
- */
-static int
-sensor_set_auto_exposure(struct usb_ov511 *ov, int enable)
-{
- PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
-
- switch (ov->sensor) {
- case SEN_OV7610:
- i2c_w_mask(ov, 0x29, enable?0x00:0x80, 0x80);
- break;
- case SEN_OV6620:
- case SEN_OV7620:
- case SEN_OV76BE:
- case SEN_OV8600:
- i2c_w_mask(ov, 0x13, enable?0x01:0x00, 0x01);
- break;
- case SEN_OV6630:
- i2c_w_mask(ov, 0x28, enable?0x00:0x10, 0x10);
- break;
- case SEN_KS0127:
- case SEN_KS0127B:
- case SEN_SAA7111A:
- PDEBUG(5, "Unsupported with this sensor");
- return -EPERM;
- default:
- err("Sensor not supported for set_auto_exposure");
- return -EINVAL;
- }
-
- ov->auto_exp = enable;
-
- return 0;
-}
-
-/* Modifies the sensor's exposure algorithm to allow proper exposure of objects
- * that are illuminated from behind.
- *
- * Tested with: OV6620, OV7620
- * Unsupported: OV7610, OV76BE, KS0127, KS0127B, SAA7111A
- * Returns: 0 for success
- */
-static int
-sensor_set_backlight(struct usb_ov511 *ov, int enable)
-{
- PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
-
- switch (ov->sensor) {
- case SEN_OV7620:
- case SEN_OV8600:
- i2c_w_mask(ov, 0x68, enable?0xe0:0xc0, 0xe0);
- i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08);
- i2c_w_mask(ov, 0x28, enable?0x02:0x00, 0x02);
- break;
- case SEN_OV6620:
- i2c_w_mask(ov, 0x4e, enable?0xe0:0xc0, 0xe0);
- i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08);
- i2c_w_mask(ov, 0x0e, enable?0x80:0x00, 0x80);
- break;
- case SEN_OV6630:
- i2c_w_mask(ov, 0x4e, enable?0x80:0x60, 0xe0);
- i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08);
- i2c_w_mask(ov, 0x28, enable?0x02:0x00, 0x02);
- break;
- case SEN_OV7610:
- case SEN_OV76BE:
- case SEN_KS0127:
- case SEN_KS0127B:
- case SEN_SAA7111A:
- PDEBUG(5, "Unsupported with this sensor");
- return -EPERM;
- default:
- err("Sensor not supported for set_backlight");
- return -EINVAL;
- }
-
- ov->backlight = enable;
-
- return 0;
-}
-
-static int
-sensor_set_mirror(struct usb_ov511 *ov, int enable)
-{
- PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
-
- switch (ov->sensor) {
- case SEN_OV6620:
- case SEN_OV6630:
- case SEN_OV7610:
- case SEN_OV7620:
- case SEN_OV76BE:
- case SEN_OV8600:
- i2c_w_mask(ov, 0x12, enable?0x40:0x00, 0x40);
- break;
- case SEN_KS0127:
- case SEN_KS0127B:
- case SEN_SAA7111A:
- PDEBUG(5, "Unsupported with this sensor");
- return -EPERM;
- default:
- err("Sensor not supported for set_mirror");
- return -EINVAL;
- }
-
- ov->mirror = enable;
-
- return 0;
-}
-
-/* Returns number of bits per pixel (regardless of where they are located;
- * planar or not), or zero for unsupported format.
- */
-static inline int
-get_depth(int palette)
-{
- switch (palette) {
- case VIDEO_PALETTE_GREY: return 8;
- case VIDEO_PALETTE_YUV420: return 12;
- case VIDEO_PALETTE_YUV420P: return 12; /* Planar */
- default: return 0; /* Invalid format */
- }
-}
-
-/* Bytes per frame. Used by read(). Return of 0 indicates error */
-static inline long int
-get_frame_length(struct ov511_frame *frame)
-{
- if (!frame)
- return 0;
- else
- return ((frame->width * frame->height
- * get_depth(frame->format)) >> 3);
-}
-
-static int
-mode_init_ov_sensor_regs(struct usb_ov511 *ov, int width, int height,
- int mode, int sub_flag, int qvga)
-{
- int clock;
-
- /******** Mode (VGA/QVGA) and sensor specific regs ********/
-
- switch (ov->sensor) {
- case SEN_OV7610:
- i2c_w(ov, 0x14, qvga?0x24:0x04);
-// FIXME: Does this improve the image quality or frame rate?
-#if 0
- i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20);
- i2c_w(ov, 0x24, 0x10);
- i2c_w(ov, 0x25, qvga?0x40:0x8a);
- i2c_w(ov, 0x2f, qvga?0x30:0xb0);
- i2c_w(ov, 0x35, qvga?0x1c:0x9c);
-#endif
- break;
- case SEN_OV7620:
-// i2c_w(ov, 0x2b, 0x00);
- i2c_w(ov, 0x14, qvga?0xa4:0x84);
- i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20);
- i2c_w(ov, 0x24, qvga?0x20:0x3a);
- i2c_w(ov, 0x25, qvga?0x30:0x60);
- i2c_w_mask(ov, 0x2d, qvga?0x40:0x00, 0x40);
- i2c_w_mask(ov, 0x67, qvga?0xf0:0x90, 0xf0);
- i2c_w_mask(ov, 0x74, qvga?0x20:0x00, 0x20);
- break;
- case SEN_OV76BE:
-// i2c_w(ov, 0x2b, 0x00);
- i2c_w(ov, 0x14, qvga?0xa4:0x84);
-// FIXME: Enable this once 7620AE uses 7620 initial settings
-#if 0
- i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20);
- i2c_w(ov, 0x24, qvga?0x20:0x3a);
- i2c_w(ov, 0x25, qvga?0x30:0x60);
- i2c_w_mask(ov, 0x2d, qvga?0x40:0x00, 0x40);
- i2c_w_mask(ov, 0x67, qvga?0xb0:0x90, 0xf0);
- i2c_w_mask(ov, 0x74, qvga?0x20:0x00, 0x20);
-#endif
- break;
- case SEN_OV6620:
- i2c_w(ov, 0x14, qvga?0x24:0x04);
- break;
- case SEN_OV6630:
- i2c_w(ov, 0x14, qvga?0xa0:0x80);
- break;
- default:
- err("Invalid sensor");
- return -EINVAL;
- }
-
- /******** Palette-specific regs ********/
-
- if (mode == VIDEO_PALETTE_GREY) {
- if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) {
- /* these aren't valid on the OV6620/OV7620/6630? */
- i2c_w_mask(ov, 0x0e, 0x40, 0x40);
- }
-
- if (ov->sensor == SEN_OV6630 && ov->bridge == BRG_OV518
- && ov518_color) {
- i2c_w_mask(ov, 0x12, 0x00, 0x10);
- i2c_w_mask(ov, 0x13, 0x00, 0x20);
- } else {
- i2c_w_mask(ov, 0x13, 0x20, 0x20);
- }
- } else {
- if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) {
- /* not valid on the OV6620/OV7620/6630? */
- i2c_w_mask(ov, 0x0e, 0x00, 0x40);
- }
-
- /* The OV518 needs special treatment. Although both the OV518
- * and the OV6630 support a 16-bit video bus, only the 8 bit Y
- * bus is actually used. The UV bus is tied to ground.
- * Therefore, the OV6630 needs to be in 8-bit multiplexed
- * output mode */
-
- if (ov->sensor == SEN_OV6630 && ov->bridge == BRG_OV518
- && ov518_color) {
- i2c_w_mask(ov, 0x12, 0x10, 0x10);
- i2c_w_mask(ov, 0x13, 0x20, 0x20);
- } else {
- i2c_w_mask(ov, 0x13, 0x00, 0x20);
- }
- }
-
- /******** Clock programming ********/
-
- /* The OV6620 needs special handling. This prevents the
- * severe banding that normally occurs */
- if (ov->sensor == SEN_OV6620 || ov->sensor == SEN_OV6630)
- {
- /* Clock down */
-
- i2c_w(ov, 0x2a, 0x04);
-
- if (ov->compress) {
-// clock = 0; /* This ensures the highest frame rate */
- clock = 3;
- } else if (clockdiv == -1) { /* If user didn't override it */
- clock = 3; /* Gives better exposure time */
- } else {
- clock = clockdiv;
- }
-
- PDEBUG(4, "Setting clock divisor to %d", clock);
-
- i2c_w(ov, 0x11, clock);
-
- i2c_w(ov, 0x2a, 0x84);
- /* This next setting is critical. It seems to improve
- * the gain or the contrast. The "reserved" bits seem
- * to have some effect in this case. */
- i2c_w(ov, 0x2d, 0x85);
- }
- else
- {
- if (ov->compress) {
- clock = 1; /* This ensures the highest frame rate */
- } else if (clockdiv == -1) { /* If user didn't override it */
- /* Calculate and set the clock divisor */
- clock = ((sub_flag ? ov->subw * ov->subh
- : width * height)
- * (mode == VIDEO_PALETTE_GREY ? 2 : 3) / 2)
- / 66000;
- } else {
- clock = clockdiv;
- }
-
- PDEBUG(4, "Setting clock divisor to %d", clock);
-
- i2c_w(ov, 0x11, clock);
- }
-
- /******** Special Features ********/
-
- if (framedrop >= 0)
- i2c_w(ov, 0x16, framedrop);
-
- /* Test Pattern */
- i2c_w_mask(ov, 0x12, (testpat?0x02:0x00), 0x02);
-
- /* Enable auto white balance */
- i2c_w_mask(ov, 0x12, 0x04, 0x04);
-
- // This will go away as soon as ov51x_mode_init_sensor_regs()
- // is fully tested.
- /* 7620/6620/6630? don't have register 0x35, so play it safe */
- if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) {
- if (width == 640 && height == 480)
- i2c_w(ov, 0x35, 0x9e);
- else
- i2c_w(ov, 0x35, 0x1e);
- }
-
- return 0;
-}
-
-static int
-set_ov_sensor_window(struct usb_ov511 *ov, int width, int height, int mode,
- int sub_flag)
-{
- int ret;
- int hwsbase, hwebase, vwsbase, vwebase, hwsize, vwsize;
- int hoffset, voffset, hwscale = 0, vwscale = 0;
-
- /* The different sensor ICs handle setting up of window differently.
- * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!!! */
- switch (ov->sensor) {
- case SEN_OV7610:
- case SEN_OV76BE:
- hwsbase = 0x38;
- hwebase = 0x3a;
- vwsbase = vwebase = 0x05;
- break;
- case SEN_OV6620:
- case SEN_OV6630:
- hwsbase = 0x38;
- hwebase = 0x3a;
- vwsbase = 0x05;
- vwebase = 0x06;
- break;
- case SEN_OV7620:
- hwsbase = 0x2f; /* From 7620.SET (spec is wrong) */
- hwebase = 0x2f;
- vwsbase = vwebase = 0x05;
- break;
- default:
- err("Invalid sensor");
- return -EINVAL;
- }
-
- if (ov->sensor == SEN_OV6620 || ov->sensor == SEN_OV6630) {
- /* Note: OV518(+) does downsample on its own) */
- if ((width > 176 && height > 144)
- || ov->bclass == BCL_OV518) { /* CIF */
- ret = mode_init_ov_sensor_regs(ov, width, height,
- mode, sub_flag, 0);
- if (ret < 0)
- return ret;
- hwscale = 1;
- vwscale = 1; /* The datasheet says 0; it's wrong */
- hwsize = 352;
- vwsize = 288;
- } else if (width > 176 || height > 144) {
- err("Illegal dimensions");
- return -EINVAL;
- } else { /* QCIF */
- ret = mode_init_ov_sensor_regs(ov, width, height,
- mode, sub_flag, 1);
- if (ret < 0)
- return ret;
- hwsize = 176;
- vwsize = 144;
- }
- } else {
- if (width > 320 && height > 240) { /* VGA */
- ret = mode_init_ov_sensor_regs(ov, width, height,
- mode, sub_flag, 0);
- if (ret < 0)
- return ret;
- hwscale = 2;
- vwscale = 1;
- hwsize = 640;
- vwsize = 480;
- } else if (width > 320 || height > 240) {
- err("Illegal dimensions");
- return -EINVAL;
- } else { /* QVGA */
- ret = mode_init_ov_sensor_regs(ov, width, height,
- mode, sub_flag, 1);
- if (ret < 0)
- return ret;
- hwscale = 1;
- hwsize = 320;
- vwsize = 240;
- }
- }
-
- /* Center the window */
- hoffset = ((hwsize - width) / 2) >> hwscale;
- voffset = ((vwsize - height) / 2) >> vwscale;
-
- /* FIXME! - This needs to be changed to support 160x120 and 6620!!! */
- if (sub_flag) {
- i2c_w(ov, 0x17, hwsbase+(ov->subx>>hwscale));
- i2c_w(ov, 0x18, hwebase+((ov->subx+ov->subw)>>hwscale));
- i2c_w(ov, 0x19, vwsbase+(ov->suby>>vwscale));
- i2c_w(ov, 0x1a, vwebase+((ov->suby+ov->subh)>>vwscale));
- } else {
- i2c_w(ov, 0x17, hwsbase + hoffset);
- i2c_w(ov, 0x18, hwebase + hoffset + (hwsize>>hwscale));
- i2c_w(ov, 0x19, vwsbase + voffset);
- i2c_w(ov, 0x1a, vwebase + voffset + (vwsize>>vwscale));
- }
-
-#ifdef OV511_DEBUG
- if (dump_sensor)
- dump_i2c_regs(ov);
-#endif
-
- return 0;
-}
-
-/* Set up the OV511/OV511+ with the given image parameters.
- *
- * Do not put any sensor-specific code in here (including I2C I/O functions)
- */
-static int
-ov511_mode_init_regs(struct usb_ov511 *ov,
- int width, int height, int mode, int sub_flag)
-{
- int hsegs, vsegs;
-
- if (sub_flag) {
- width = ov->subw;
- height = ov->subh;
- }
-
- PDEBUG(3, "width:%d, height:%d, mode:%d, sub:%d",
- width, height, mode, sub_flag);
-
- // FIXME: This should be moved to a 7111a-specific function once
- // subcapture is dealt with properly
- if (ov->sensor == SEN_SAA7111A) {
- if (width == 320 && height == 240) {
- /* No need to do anything special */
- } else if (width == 640 && height == 480) {
- /* Set the OV511 up as 320x480, but keep the
- * V4L resolution as 640x480 */
- width = 320;
- } else {
- err("SAA7111A only allows 320x240 or 640x480");
- return -EINVAL;
- }
- }
-
- /* Make sure width and height are a multiple of 8 */
- if (width % 8 || height % 8) {
- err("Invalid size (%d, %d) (mode = %d)", width, height, mode);
- return -EINVAL;
- }
-
- if (width < ov->minwidth || height < ov->minheight) {
- err("Requested dimensions are too small");
- return -EINVAL;
- }
-
- if (ov51x_stop(ov) < 0)
- return -EIO;
-
- if (mode == VIDEO_PALETTE_GREY) {
- reg_w(ov, R511_CAM_UV_EN, 0x00);
- reg_w(ov, R511_SNAP_UV_EN, 0x00);
- reg_w(ov, R511_SNAP_OPTS, 0x01);
- } else {
- reg_w(ov, R511_CAM_UV_EN, 0x01);
- reg_w(ov, R511_SNAP_UV_EN, 0x01);
- reg_w(ov, R511_SNAP_OPTS, 0x03);
- }
-
- /* Here I'm assuming that snapshot size == image size.
- * I hope that's always true. --claudio
- */
- hsegs = (width >> 3) - 1;
- vsegs = (height >> 3) - 1;
-
- reg_w(ov, R511_CAM_PXCNT, hsegs);
- reg_w(ov, R511_CAM_LNCNT, vsegs);
- reg_w(ov, R511_CAM_PXDIV, 0x00);
- reg_w(ov, R511_CAM_LNDIV, 0x00);
-
- /* YUV420, low pass filter on */
- reg_w(ov, R511_CAM_OPTS, 0x03);
-
- /* Snapshot additions */
- reg_w(ov, R511_SNAP_PXCNT, hsegs);
- reg_w(ov, R511_SNAP_LNCNT, vsegs);
- reg_w(ov, R511_SNAP_PXDIV, 0x00);
- reg_w(ov, R511_SNAP_LNDIV, 0x00);
-
- if (ov->compress) {
- /* Enable Y and UV quantization and compression */
- reg_w(ov, R511_COMP_EN, 0x07);
- reg_w(ov, R511_COMP_LUT_EN, 0x03);
- ov51x_reset(ov, OV511_RESET_OMNICE);
- }
-
- if (ov51x_restart(ov) < 0)
- return -EIO;
-
- return 0;
-}
-
-/* Sets up the OV518/OV518+ with the given image parameters
- *
- * OV518 needs a completely different approach, until we can figure out what
- * the individual registers do. Also, only 15 FPS is supported now.
- *
- * Do not put any sensor-specific code in here (including I2C I/O functions)
- */
-static int
-ov518_mode_init_regs(struct usb_ov511 *ov,
- int width, int height, int mode, int sub_flag)
-{
- int hsegs, vsegs, hi_res;
-
- if (sub_flag) {
- width = ov->subw;
- height = ov->subh;
- }
-
- PDEBUG(3, "width:%d, height:%d, mode:%d, sub:%d",
- width, height, mode, sub_flag);
-
- if (width % 16 || height % 8) {
- err("Invalid size (%d, %d)", width, height);
- return -EINVAL;
- }
-
- if (width < ov->minwidth || height < ov->minheight) {
- err("Requested dimensions are too small");
- return -EINVAL;
- }
-
- if (width >= 320 && height >= 240) {
- hi_res = 1;
- } else if (width >= 320 || height >= 240) {
- err("Invalid width/height combination (%d, %d)", width, height);
- return -EINVAL;
- } else {
- hi_res = 0;
- }
-
- if (ov51x_stop(ov) < 0)
- return -EIO;
-
- /******** Set the mode ********/
-
- reg_w(ov, 0x2b, 0);
- reg_w(ov, 0x2c, 0);
- reg_w(ov, 0x2d, 0);
- reg_w(ov, 0x2e, 0);
- reg_w(ov, 0x3b, 0);
- reg_w(ov, 0x3c, 0);
- reg_w(ov, 0x3d, 0);
- reg_w(ov, 0x3e, 0);
-
- if (ov->bridge == BRG_OV518 && ov518_color) {
- /* OV518 needs U and V swapped */
- i2c_w_mask(ov, 0x15, 0x00, 0x01);
-
- if (mode == VIDEO_PALETTE_GREY) {
- /* Set 16-bit input format (UV data are ignored) */
- reg_w_mask(ov, 0x20, 0x00, 0x08);
-
- /* Set 8-bit (4:0:0) output format */
- reg_w_mask(ov, 0x28, 0x00, 0xf0);
- reg_w_mask(ov, 0x38, 0x00, 0xf0);
- } else {
- /* Set 8-bit (YVYU) input format */
- reg_w_mask(ov, 0x20, 0x08, 0x08);
-
- /* Set 12-bit (4:2:0) output format */
- reg_w_mask(ov, 0x28, 0x80, 0xf0);
- reg_w_mask(ov, 0x38, 0x80, 0xf0);
- }
- } else {
- reg_w(ov, 0x28, (mode == VIDEO_PALETTE_GREY) ? 0x00:0x80);
- reg_w(ov, 0x38, (mode == VIDEO_PALETTE_GREY) ? 0x00:0x80);
- }
-
- hsegs = width / 16;
- vsegs = height / 4;
-
- reg_w(ov, 0x29, hsegs);
- reg_w(ov, 0x2a, vsegs);
-
- reg_w(ov, 0x39, hsegs);
- reg_w(ov, 0x3a, vsegs);
-
- /* Windows driver does this here; who knows why */
- reg_w(ov, 0x2f, 0x80);
-
- /******** Set the framerate (to 15 FPS) ********/
-
- /* Mode independent, but framerate dependent, regs */
- reg_w(ov, 0x51, 0x02); /* Clock divider; lower==faster */
- reg_w(ov, 0x22, 0x18);
- reg_w(ov, 0x23, 0xff);
-
- if (ov->bridge == BRG_OV518PLUS)
- reg_w(ov, 0x21, 0x19);
- else
- reg_w(ov, 0x71, 0x19); /* Compression-related? */
-
- // FIXME: Sensor-specific
- /* Bit 5 is what matters here. Of course, it is "reserved" */
- i2c_w(ov, 0x54, 0x23);
-
- reg_w(ov, 0x2f, 0x80);
-
- if (ov->bridge == BRG_OV518PLUS) {
- reg_w(ov, 0x24, 0x94);
- reg_w(ov, 0x25, 0x90);
- ov518_reg_w32(ov, 0xc4, 400, 2); /* 190h */
- ov518_reg_w32(ov, 0xc6, 540, 2); /* 21ch */
- ov518_reg_w32(ov, 0xc7, 540, 2); /* 21ch */
- ov518_reg_w32(ov, 0xc8, 108, 2); /* 6ch */
- ov518_reg_w32(ov, 0xca, 131098, 3); /* 2001ah */
- ov518_reg_w32(ov, 0xcb, 532, 2); /* 214h */
- ov518_reg_w32(ov, 0xcc, 2400, 2); /* 960h */
- ov518_reg_w32(ov, 0xcd, 32, 2); /* 20h */
- ov518_reg_w32(ov, 0xce, 608, 2); /* 260h */
- } else {
- reg_w(ov, 0x24, 0x9f);
- reg_w(ov, 0x25, 0x90);
- ov518_reg_w32(ov, 0xc4, 400, 2); /* 190h */
- ov518_reg_w32(ov, 0xc6, 500, 2); /* 1f4h */
- ov518_reg_w32(ov, 0xc7, 500, 2); /* 1f4h */
- ov518_reg_w32(ov, 0xc8, 142, 2); /* 8eh */
- ov518_reg_w32(ov, 0xca, 131098, 3); /* 2001ah */
- ov518_reg_w32(ov, 0xcb, 532, 2); /* 214h */
- ov518_reg_w32(ov, 0xcc, 2000, 2); /* 7d0h */
- ov518_reg_w32(ov, 0xcd, 32, 2); /* 20h */
- ov518_reg_w32(ov, 0xce, 608, 2); /* 260h */
- }
-
- reg_w(ov, 0x2f, 0x80);
-
- if (ov51x_restart(ov) < 0)
- return -EIO;
-
- /* Reset it just for good measure */
- if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0)
- return -EIO;
-
- return 0;
-}
-
-/* This is a wrapper around the OV511, OV518, and sensor specific functions */
-static int
-mode_init_regs(struct usb_ov511 *ov,
- int width, int height, int mode, int sub_flag)
-{
- int rc = 0;
-
- if (!ov || !ov->dev)
- return -EFAULT;
-
- if (ov->bclass == BCL_OV518) {
- rc = ov518_mode_init_regs(ov, width, height, mode, sub_flag);
- } else {
- rc = ov511_mode_init_regs(ov, width, height, mode, sub_flag);
- }
-
- if (FATAL_ERROR(rc))
- return rc;
-
- switch (ov->sensor) {
- case SEN_OV7610:
- case SEN_OV7620:
- case SEN_OV76BE:
- case SEN_OV8600:
- case SEN_OV6620:
- case SEN_OV6630:
- rc = set_ov_sensor_window(ov, width, height, mode, sub_flag);
- break;
- case SEN_KS0127:
- case SEN_KS0127B:
- err("KS0127-series decoders not supported yet");
- rc = -EINVAL;
- break;
- case SEN_SAA7111A:
-// rc = mode_init_saa_sensor_regs(ov, width, height, mode,
-// sub_flag);
-
- PDEBUG(1, "SAA status = 0x%02X", i2c_r(ov, 0x1f));
- break;
- default:
- err("Unknown sensor");
- rc = -EINVAL;
- }
-
- if (FATAL_ERROR(rc))
- return rc;
-
- /* Sensor-independent settings */
- rc = sensor_set_auto_brightness(ov, ov->auto_brt);
- if (FATAL_ERROR(rc))
- return rc;
-
- rc = sensor_set_auto_exposure(ov, ov->auto_exp);
- if (FATAL_ERROR(rc))
- return rc;
-
- rc = sensor_set_banding_filter(ov, bandingfilter);
- if (FATAL_ERROR(rc))
- return rc;
-
- if (ov->lightfreq) {
- rc = sensor_set_light_freq(ov, lightfreq);
- if (FATAL_ERROR(rc))
- return rc;
- }
-
- rc = sensor_set_backlight(ov, ov->backlight);
- if (FATAL_ERROR(rc))
- return rc;
-
- rc = sensor_set_mirror(ov, ov->mirror);
- if (FATAL_ERROR(rc))
- return rc;
-
- return 0;
-}
-
-/* This sets the default image parameters. This is useful for apps that use
- * read() and do not set these.
- */
-static int
-ov51x_set_default_params(struct usb_ov511 *ov)
-{
- int i;
-
- /* Set default sizes in case IOCTL (VIDIOCMCAPTURE) is not used
- * (using read() instead). */
- for (i = 0; i < OV511_NUMFRAMES; i++) {
- ov->frame[i].width = ov->maxwidth;
- ov->frame[i].height = ov->maxheight;
- ov->frame[i].bytes_read = 0;
- if (force_palette)
- ov->frame[i].format = force_palette;
- else
- ov->frame[i].format = VIDEO_PALETTE_YUV420;
-
- ov->frame[i].depth = get_depth(ov->frame[i].format);
- }
-
- PDEBUG(3, "%dx%d, %s", ov->maxwidth, ov->maxheight,
- symbolic(v4l1_plist, ov->frame[0].format));
-
- /* Initialize to max width/height, YUV420 or RGB24 (if supported) */
- if (mode_init_regs(ov, ov->maxwidth, ov->maxheight,
- ov->frame[0].format, 0) < 0)
- return -EINVAL;
-
- return 0;
-}
-
-/**********************************************************************
- *
- * Video decoder stuff
- *
- **********************************************************************/
-
-/* Set analog input port of decoder */
-static int
-decoder_set_input(struct usb_ov511 *ov, int input)
-{
- PDEBUG(4, "port %d", input);
-
- switch (ov->sensor) {
- case SEN_SAA7111A:
- {
- /* Select mode */
- i2c_w_mask(ov, 0x02, input, 0x07);
- /* Bypass chrominance trap for modes 4..7 */
- i2c_w_mask(ov, 0x09, (input > 3) ? 0x80:0x00, 0x80);
- break;
- }
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-/* Get ASCII name of video input */
-static int
-decoder_get_input_name(struct usb_ov511 *ov, int input, char *name)
-{
- switch (ov->sensor) {
- case SEN_SAA7111A:
- {
- if (input < 0 || input > 7)
- return -EINVAL;
- else if (input < 4)
- sprintf(name, "CVBS-%d", input);
- else // if (input < 8)
- sprintf(name, "S-Video-%d", input - 4);
- break;
- }
- default:
- sprintf(name, "%s", "Camera");
- }
-
- return 0;
-}
-
-/* Set norm (NTSC, PAL, SECAM, AUTO) */
-static int
-decoder_set_norm(struct usb_ov511 *ov, int norm)
-{
- PDEBUG(4, "%d", norm);
-
- switch (ov->sensor) {
- case SEN_SAA7111A:
- {
- int reg_8, reg_e;
-
- if (norm == VIDEO_MODE_NTSC) {
- reg_8 = 0x40; /* 60 Hz */
- reg_e = 0x00; /* NTSC M / PAL BGHI */
- } else if (norm == VIDEO_MODE_PAL) {
- reg_8 = 0x00; /* 50 Hz */
- reg_e = 0x00; /* NTSC M / PAL BGHI */
- } else if (norm == VIDEO_MODE_AUTO) {
- reg_8 = 0x80; /* Auto field detect */
- reg_e = 0x00; /* NTSC M / PAL BGHI */
- } else if (norm == VIDEO_MODE_SECAM) {
- reg_8 = 0x00; /* 50 Hz */
- reg_e = 0x50; /* SECAM / PAL 4.43 */
- } else {
- return -EINVAL;
- }
-
- i2c_w_mask(ov, 0x08, reg_8, 0xc0);
- i2c_w_mask(ov, 0x0e, reg_e, 0x70);
- break;
- }
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-/**********************************************************************
- *
- * Raw data parsing
- *
- **********************************************************************/
-
-/* Copies a 64-byte segment at pIn to an 8x8 block at pOut. The width of the
- * image at pOut is specified by w.
- */
-static inline void
-make_8x8(unsigned char *pIn, unsigned char *pOut, int w)
-{
- unsigned char *pOut1 = pOut;
- int x, y;
-
- for (y = 0; y < 8; y++) {
- pOut1 = pOut;
- for (x = 0; x < 8; x++) {
- *pOut1++ = *pIn++;
- }
- pOut += w;
- }
-}
-
-/*
- * For RAW BW (YUV 4:0:0) images, data show up in 256 byte segments.
- * The segments represent 4 squares of 8x8 pixels as follows:
- *
- * 0 1 ... 7 64 65 ... 71 ... 192 193 ... 199
- * 8 9 ... 15 72 73 ... 79 200 201 ... 207
- * ... ... ...
- * 56 57 ... 63 120 121 ... 127 248 249 ... 255
- *
- */
-static void
-yuv400raw_to_yuv400p(struct ov511_frame *frame,
- unsigned char *pIn0, unsigned char *pOut0)
-{
- int x, y;
- unsigned char *pIn, *pOut, *pOutLine;
-
- /* Copy Y */
- pIn = pIn0;
- pOutLine = pOut0;
- for (y = 0; y < frame->rawheight - 1; y += 8) {
- pOut = pOutLine;
- for (x = 0; x < frame->rawwidth - 1; x += 8) {
- make_8x8(pIn, pOut, frame->rawwidth);
- pIn += 64;
- pOut += 8;
- }
- pOutLine += 8 * frame->rawwidth;
- }
-}
-
-/*
- * For YUV 4:2:0 images, the data show up in 384 byte segments.
- * The first 64 bytes of each segment are U, the next 64 are V. The U and
- * V are arranged as follows:
- *
- * 0 1 ... 7
- * 8 9 ... 15
- * ...
- * 56 57 ... 63
- *
- * U and V are shipped at half resolution (1 U,V sample -> one 2x2 block).
- *
- * The next 256 bytes are full resolution Y data and represent 4 squares
- * of 8x8 pixels as follows:
- *
- * 0 1 ... 7 64 65 ... 71 ... 192 193 ... 199
- * 8 9 ... 15 72 73 ... 79 200 201 ... 207
- * ... ... ...
- * 56 57 ... 63 120 121 ... 127 ... 248 249 ... 255
- *
- * Note that the U and V data in one segment represent a 16 x 16 pixel
- * area, but the Y data represent a 32 x 8 pixel area. If the width is not an
- * even multiple of 32, the extra 8x8 blocks within a 32x8 block belong to the
- * next horizontal stripe.
- *
- * If dumppix module param is set, _parse_data just dumps the incoming segments,
- * verbatim, in order, into the frame. When used with vidcat -f ppm -s 640x480
- * this puts the data on the standard output and can be analyzed with the
- * parseppm.c utility I wrote. That's a much faster way for figuring out how
- * these data are scrambled.
- */
-
-/* Converts from raw, uncompressed segments at pIn0 to a YUV420P frame at pOut0.
- *
- * FIXME: Currently only handles width and height that are multiples of 16
- */
-static void
-yuv420raw_to_yuv420p(struct ov511_frame *frame,
- unsigned char *pIn0, unsigned char *pOut0)
-{
- int k, x, y;
- unsigned char *pIn, *pOut, *pOutLine;
- const unsigned int a = frame->rawwidth * frame->rawheight;
- const unsigned int w = frame->rawwidth / 2;
-
- /* Copy U and V */
- pIn = pIn0;
- pOutLine = pOut0 + a;
- for (y = 0; y < frame->rawheight - 1; y += 16) {
- pOut = pOutLine;
- for (x = 0; x < frame->rawwidth - 1; x += 16) {
- make_8x8(pIn, pOut, w);
- make_8x8(pIn + 64, pOut + a/4, w);
- pIn += 384;
- pOut += 8;
- }
- pOutLine += 8 * w;
- }
-
- /* Copy Y */
- pIn = pIn0 + 128;
- pOutLine = pOut0;
- k = 0;
- for (y = 0; y < frame->rawheight - 1; y += 8) {
- pOut = pOutLine;
- for (x = 0; x < frame->rawwidth - 1; x += 8) {
- make_8x8(pIn, pOut, frame->rawwidth);
- pIn += 64;
- pOut += 8;
- if ((++k) > 3) {
- k = 0;
- pIn += 128;
- }
- }
- pOutLine += 8 * frame->rawwidth;
- }
-}
-
-/**********************************************************************
- *
- * Decompression
- *
- **********************************************************************/
-
-static int
-request_decompressor(struct usb_ov511 *ov)
-{
- if (ov->bclass == BCL_OV511 || ov->bclass == BCL_OV518) {
- err("No decompressor available");
- } else {
- err("Unknown bridge");
- }
-
- return -ENOSYS;
-}
-
-static void
-decompress(struct usb_ov511 *ov, struct ov511_frame *frame,
- unsigned char *pIn0, unsigned char *pOut0)
-{
- if (!ov->decomp_ops)
- if (request_decompressor(ov))
- return;
-
-}
-
-/**********************************************************************
- *
- * Format conversion
- *
- **********************************************************************/
-
-/* Fuses even and odd fields together, and doubles width.
- * INPUT: an odd field followed by an even field at pIn0, in YUV planar format
- * OUTPUT: a normal YUV planar image, with correct aspect ratio
- */
-static void
-deinterlace(struct ov511_frame *frame, int rawformat,
- unsigned char *pIn0, unsigned char *pOut0)
-{
- const int fieldheight = frame->rawheight / 2;
- const int fieldpix = fieldheight * frame->rawwidth;
- const int w = frame->width;
- int x, y;
- unsigned char *pInEven, *pInOdd, *pOut;
-
- PDEBUG(5, "fieldheight=%d", fieldheight);
-
- if (frame->rawheight != frame->height) {
- err("invalid height");
- return;
- }
-
- if ((frame->rawwidth * 2) != frame->width) {
- err("invalid width");
- return;
- }
-
- /* Y */
- pInOdd = pIn0;
- pInEven = pInOdd + fieldpix;
- pOut = pOut0;
- for (y = 0; y < fieldheight; y++) {
- for (x = 0; x < frame->rawwidth; x++) {
- *pOut = *pInEven;
- *(pOut+1) = *pInEven++;
- *(pOut+w) = *pInOdd;
- *(pOut+w+1) = *pInOdd++;
- pOut += 2;
- }
- pOut += w;
- }
-
- if (rawformat == RAWFMT_YUV420) {
- /* U */
- pInOdd = pIn0 + fieldpix * 2;
- pInEven = pInOdd + fieldpix / 4;
- for (y = 0; y < fieldheight / 2; y++) {
- for (x = 0; x < frame->rawwidth / 2; x++) {
- *pOut = *pInEven;
- *(pOut+1) = *pInEven++;
- *(pOut+w/2) = *pInOdd;
- *(pOut+w/2+1) = *pInOdd++;
- pOut += 2;
- }
- pOut += w/2;
- }
- /* V */
- pInOdd = pIn0 + fieldpix * 2 + fieldpix / 2;
- pInEven = pInOdd + fieldpix / 4;
- for (y = 0; y < fieldheight / 2; y++) {
- for (x = 0; x < frame->rawwidth / 2; x++) {
- *pOut = *pInEven;
- *(pOut+1) = *pInEven++;
- *(pOut+w/2) = *pInOdd;
- *(pOut+w/2+1) = *pInOdd++;
- pOut += 2;
- }
- pOut += w/2;
- }
- }
-}
-
-static void
-ov51x_postprocess_grey(struct usb_ov511 *ov, struct ov511_frame *frame)
-{
- /* Deinterlace frame, if necessary */
- if (ov->sensor == SEN_SAA7111A && frame->rawheight >= 480) {
- if (frame->compressed)
- decompress(ov, frame, frame->rawdata,
- frame->tempdata);
- else
- yuv400raw_to_yuv400p(frame, frame->rawdata,
- frame->tempdata);
-
- deinterlace(frame, RAWFMT_YUV400, frame->tempdata,
- frame->data);
- } else {
- if (frame->compressed)
- decompress(ov, frame, frame->rawdata,
- frame->data);
- else
- yuv400raw_to_yuv400p(frame, frame->rawdata,
- frame->data);
- }
-}
-
-/* Process raw YUV420 data into standard YUV420P */
-static void
-ov51x_postprocess_yuv420(struct usb_ov511 *ov, struct ov511_frame *frame)
-{
- /* Deinterlace frame, if necessary */
- if (ov->sensor == SEN_SAA7111A && frame->rawheight >= 480) {
- if (frame->compressed)
- decompress(ov, frame, frame->rawdata, frame->tempdata);
- else
- yuv420raw_to_yuv420p(frame, frame->rawdata,
- frame->tempdata);
-
- deinterlace(frame, RAWFMT_YUV420, frame->tempdata,
- frame->data);
- } else {
- if (frame->compressed)
- decompress(ov, frame, frame->rawdata, frame->data);
- else
- yuv420raw_to_yuv420p(frame, frame->rawdata,
- frame->data);
- }
-}
-
-/* Post-processes the specified frame. This consists of:
- * 1. Decompress frame, if necessary
- * 2. Deinterlace frame and scale to proper size, if necessary
- * 3. Convert from YUV planar to destination format, if necessary
- * 4. Fix the RGB offset, if necessary
- */
-static void
-ov51x_postprocess(struct usb_ov511 *ov, struct ov511_frame *frame)
-{
- if (dumppix) {
- memset(frame->data, 0,
- MAX_DATA_SIZE(ov->maxwidth, ov->maxheight));
- PDEBUG(4, "Dumping %d bytes", frame->bytes_recvd);
- memcpy(frame->data, frame->rawdata, frame->bytes_recvd);
- } else {
- switch (frame->format) {
- case VIDEO_PALETTE_GREY:
- ov51x_postprocess_grey(ov, frame);
- break;
- case VIDEO_PALETTE_YUV420:
- case VIDEO_PALETTE_YUV420P:
- ov51x_postprocess_yuv420(ov, frame);
- break;
- default:
- err("Cannot convert data to %s",
- symbolic(v4l1_plist, frame->format));
- }
- }
-}
-
-/**********************************************************************
- *
- * OV51x data transfer, IRQ handler
- *
- **********************************************************************/
-
-static inline void
-ov511_move_data(struct usb_ov511 *ov, unsigned char *in, int n)
-{
- int num, offset;
- int pnum = in[ov->packet_size - 1]; /* Get packet number */
- int max_raw = MAX_RAW_DATA_SIZE(ov->maxwidth, ov->maxheight);
- struct ov511_frame *frame = &ov->frame[ov->curframe];
- struct timeval *ts;
-
- /* SOF/EOF packets have 1st to 8th bytes zeroed and the 9th
- * byte non-zero. The EOF packet has image width/height in the
- * 10th and 11th bytes. The 9th byte is given as follows:
- *
- * bit 7: EOF
- * 6: compression enabled
- * 5: 422/420/400 modes
- * 4: 422/420/400 modes
- * 3: 1
- * 2: snapshot button on
- * 1: snapshot frame
- * 0: even/odd field
- */
-
- if (printph) {
- dev_info(&ov->dev->dev,
- "ph(%3d): %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x\n",
- pnum, in[0], in[1], in[2], in[3], in[4], in[5], in[6],
- in[7], in[8], in[9], in[10], in[11]);
- }
-
- /* Check for SOF/EOF packet */
- if ((in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) ||
- (~in[8] & 0x08))
- goto check_middle;
-
- /* Frame end */
- if (in[8] & 0x80) {
- ts = (struct timeval *)(frame->data
- + MAX_FRAME_SIZE(ov->maxwidth, ov->maxheight));
- do_gettimeofday(ts);
-
- /* Get the actual frame size from the EOF header */
- frame->rawwidth = ((int)(in[9]) + 1) * 8;
- frame->rawheight = ((int)(in[10]) + 1) * 8;
-
- PDEBUG(4, "Frame end, frame=%d, pnum=%d, w=%d, h=%d, recvd=%d",
- ov->curframe, pnum, frame->rawwidth, frame->rawheight,
- frame->bytes_recvd);
-
- /* Validate the header data */
- RESTRICT_TO_RANGE(frame->rawwidth, ov->minwidth, ov->maxwidth);
- RESTRICT_TO_RANGE(frame->rawheight, ov->minheight,
- ov->maxheight);
-
- /* Don't allow byte count to exceed buffer size */
- RESTRICT_TO_RANGE(frame->bytes_recvd, 8, max_raw);
-
- if (frame->scanstate == STATE_LINES) {
- int nextf;
-
- frame->grabstate = FRAME_DONE;
- wake_up_interruptible(&frame->wq);
-
- /* If next frame is ready or grabbing,
- * point to it */
- nextf = (ov->curframe + 1) % OV511_NUMFRAMES;
- if (ov->frame[nextf].grabstate == FRAME_READY
- || ov->frame[nextf].grabstate == FRAME_GRABBING) {
- ov->curframe = nextf;
- ov->frame[nextf].scanstate = STATE_SCANNING;
- } else {
- if (frame->grabstate == FRAME_DONE) {
- PDEBUG(4, "** Frame done **");
- } else {
- PDEBUG(4, "Frame not ready? state = %d",
- ov->frame[nextf].grabstate);
- }
-
- ov->curframe = -1;
- }
- } else {
- PDEBUG(5, "Frame done, but not scanning");
- }
- /* Image corruption caused by misplaced frame->segment = 0
- * fixed by carlosf@conectiva.com.br
- */
- } else {
- /* Frame start */
- PDEBUG(4, "Frame start, framenum = %d", ov->curframe);
-
- /* Check to see if it's a snapshot frame */
- /* FIXME?? Should the snapshot reset go here? Performance? */
- if (in[8] & 0x02) {
- frame->snapshot = 1;
- PDEBUG(3, "snapshot detected");
- }
-
- frame->scanstate = STATE_LINES;
- frame->bytes_recvd = 0;
- frame->compressed = in[8] & 0x40;
- }
-
-check_middle:
- /* Are we in a frame? */
- if (frame->scanstate != STATE_LINES) {
- PDEBUG(5, "Not in a frame; packet skipped");
- return;
- }
-
- /* If frame start, skip header */
- if (frame->bytes_recvd == 0)
- offset = 9;
- else
- offset = 0;
-
- num = n - offset - 1;
-
- /* Dump all data exactly as received */
- if (dumppix == 2) {
- frame->bytes_recvd += n - 1;
- if (frame->bytes_recvd <= max_raw)
- memcpy(frame->rawdata + frame->bytes_recvd - (n - 1),
- in, n - 1);
- else
- PDEBUG(3, "Raw data buffer overrun!! (%d)",
- frame->bytes_recvd - max_raw);
- } else if (!frame->compressed && !remove_zeros) {
- frame->bytes_recvd += num;
- if (frame->bytes_recvd <= max_raw)
- memcpy(frame->rawdata + frame->bytes_recvd - num,
- in + offset, num);
- else
- PDEBUG(3, "Raw data buffer overrun!! (%d)",
- frame->bytes_recvd - max_raw);
- } else { /* Remove all-zero FIFO lines (aligned 32-byte blocks) */
- int b, read = 0, allzero, copied = 0;
- if (offset) {
- frame->bytes_recvd += 32 - offset; // Bytes out
- memcpy(frame->rawdata, in + offset, 32 - offset);
- read += 32;
- }
-
- while (read < n - 1) {
- allzero = 1;
- for (b = 0; b < 32; b++) {
- if (in[read + b]) {
- allzero = 0;
- break;
- }
- }
-
- if (allzero) {
- /* Don't copy it */
- } else {
- if (frame->bytes_recvd + copied + 32 <= max_raw)
- {
- memcpy(frame->rawdata
- + frame->bytes_recvd + copied,
- in + read, 32);
- copied += 32;
- } else {
- PDEBUG(3, "Raw data buffer overrun!!");
- }
- }
- read += 32;
- }
-
- frame->bytes_recvd += copied;
- }
-}
-
-static inline void
-ov518_move_data(struct usb_ov511 *ov, unsigned char *in, int n)
-{
- int max_raw = MAX_RAW_DATA_SIZE(ov->maxwidth, ov->maxheight);
- struct ov511_frame *frame = &ov->frame[ov->curframe];
- struct timeval *ts;
-
- /* Don't copy the packet number byte */
- if (ov->packet_numbering)
- --n;
-
- /* A false positive here is likely, until OVT gives me
- * the definitive SOF/EOF format */
- if ((!(in[0] | in[1] | in[2] | in[3] | in[5])) && in[6]) {
- if (printph) {
- dev_info(&ov->dev->dev,
- "ph: %2x %2x %2x %2x %2x %2x %2x %2x\n",
- in[0], in[1], in[2], in[3], in[4], in[5],
- in[6], in[7]);
- }
-
- if (frame->scanstate == STATE_LINES) {
- PDEBUG(4, "Detected frame end/start");
- goto eof;
- } else { //scanstate == STATE_SCANNING
- /* Frame start */
- PDEBUG(4, "Frame start, framenum = %d", ov->curframe);
- goto sof;
- }
- } else {
- goto check_middle;
- }
-
-eof:
- ts = (struct timeval *)(frame->data
- + MAX_FRAME_SIZE(ov->maxwidth, ov->maxheight));
- do_gettimeofday(ts);
-
- PDEBUG(4, "Frame end, curframe = %d, hw=%d, vw=%d, recvd=%d",
- ov->curframe,
- (int)(in[9]), (int)(in[10]), frame->bytes_recvd);
-
- // FIXME: Since we don't know the header formats yet,
- // there is no way to know what the actual image size is
- frame->rawwidth = frame->width;
- frame->rawheight = frame->height;
-
- /* Validate the header data */
- RESTRICT_TO_RANGE(frame->rawwidth, ov->minwidth, ov->maxwidth);
- RESTRICT_TO_RANGE(frame->rawheight, ov->minheight, ov->maxheight);
-
- /* Don't allow byte count to exceed buffer size */
- RESTRICT_TO_RANGE(frame->bytes_recvd, 8, max_raw);
-
- if (frame->scanstate == STATE_LINES) {
- int nextf;
-
- frame->grabstate = FRAME_DONE;
- wake_up_interruptible(&frame->wq);
-
- /* If next frame is ready or grabbing,
- * point to it */
- nextf = (ov->curframe + 1) % OV511_NUMFRAMES;
- if (ov->frame[nextf].grabstate == FRAME_READY
- || ov->frame[nextf].grabstate == FRAME_GRABBING) {
- ov->curframe = nextf;
- ov->frame[nextf].scanstate = STATE_SCANNING;
- frame = &ov->frame[nextf];
- } else {
- if (frame->grabstate == FRAME_DONE) {
- PDEBUG(4, "** Frame done **");
- } else {
- PDEBUG(4, "Frame not ready? state = %d",
- ov->frame[nextf].grabstate);
- }
-
- ov->curframe = -1;
- PDEBUG(4, "SOF dropped (no active frame)");
- return; /* Nowhere to store this frame */
- }
- }
-sof:
- PDEBUG(4, "Starting capture on frame %d", frame->framenum);
-
-// Snapshot not reverse-engineered yet.
-#if 0
- /* Check to see if it's a snapshot frame */
- /* FIXME?? Should the snapshot reset go here? Performance? */
- if (in[8] & 0x02) {
- frame->snapshot = 1;
- PDEBUG(3, "snapshot detected");
- }
-#endif
- frame->scanstate = STATE_LINES;
- frame->bytes_recvd = 0;
- frame->compressed = 1;
-
-check_middle:
- /* Are we in a frame? */
- if (frame->scanstate != STATE_LINES) {
- PDEBUG(4, "scanstate: no SOF yet");
- return;
- }
-
- /* Dump all data exactly as received */
- if (dumppix == 2) {
- frame->bytes_recvd += n;
- if (frame->bytes_recvd <= max_raw)
- memcpy(frame->rawdata + frame->bytes_recvd - n, in, n);
- else
- PDEBUG(3, "Raw data buffer overrun!! (%d)",
- frame->bytes_recvd - max_raw);
- } else {
- /* All incoming data are divided into 8-byte segments. If the
- * segment contains all zero bytes, it must be skipped. These
- * zero-segments allow the OV518 to mainain a constant data rate
- * regardless of the effectiveness of the compression. Segments
- * are aligned relative to the beginning of each isochronous
- * packet. The first segment in each image is a header (the
- * decompressor skips it later).
- */
-
- int b, read = 0, allzero, copied = 0;
-
- while (read < n) {
- allzero = 1;
- for (b = 0; b < 8; b++) {
- if (in[read + b]) {
- allzero = 0;
- break;
- }
- }
-
- if (allzero) {
- /* Don't copy it */
- } else {
- if (frame->bytes_recvd + copied + 8 <= max_raw)
- {
- memcpy(frame->rawdata
- + frame->bytes_recvd + copied,
- in + read, 8);
- copied += 8;
- } else {
- PDEBUG(3, "Raw data buffer overrun!!");
- }
- }
- read += 8;
- }
- frame->bytes_recvd += copied;
- }
-}
-
-static void
-ov51x_isoc_irq(struct urb *urb)
-{
- int i;
- struct usb_ov511 *ov;
- struct ov511_sbuf *sbuf;
-
- if (!urb->context) {
- PDEBUG(4, "no context");
- return;
- }
-
- sbuf = urb->context;
- ov = sbuf->ov;
-
- if (!ov || !ov->dev || !ov->user) {
- PDEBUG(4, "no device, or not open");
- return;
- }
-
- if (!ov->streaming) {
- PDEBUG(4, "hmmm... not streaming, but got interrupt");
- return;
- }
-
- if (urb->status == -ENOENT || urb->status == -ECONNRESET) {
- PDEBUG(4, "URB unlinked");
- return;
- }
-
- if (urb->status != -EINPROGRESS && urb->status != 0) {
- err("ERROR: urb->status=%d: %s", urb->status,
- symbolic(urb_errlist, urb->status));
- }
-
- /* Copy the data received into our frame buffer */
- PDEBUG(5, "sbuf[%d]: Moving %d packets", sbuf->n,
- urb->number_of_packets);
- for (i = 0; i < urb->number_of_packets; i++) {
- /* Warning: Don't call *_move_data() if no frame active! */
- if (ov->curframe >= 0) {
- int n = urb->iso_frame_desc[i].actual_length;
- int st = urb->iso_frame_desc[i].status;
- unsigned char *cdata;
-
- urb->iso_frame_desc[i].actual_length = 0;
- urb->iso_frame_desc[i].status = 0;
-
- cdata = urb->transfer_buffer
- + urb->iso_frame_desc[i].offset;
-
- if (!n) {
- PDEBUG(4, "Zero-length packet");
- continue;
- }
-
- if (st)
- PDEBUG(2, "data error: [%d] len=%d, status=%d",
- i, n, st);
-
- if (ov->bclass == BCL_OV511)
- ov511_move_data(ov, cdata, n);
- else if (ov->bclass == BCL_OV518)
- ov518_move_data(ov, cdata, n);
- else
- err("Unknown bridge device (%d)", ov->bridge);
-
- } else if (waitqueue_active(&ov->wq)) {
- wake_up_interruptible(&ov->wq);
- }
- }
-
- /* Resubmit this URB */
- urb->dev = ov->dev;
- if ((i = usb_submit_urb(urb, GFP_ATOMIC)) != 0)
- err("usb_submit_urb() ret %d", i);
-
- return;
-}
-
-/****************************************************************************
- *
- * Stream initialization and termination
- *
- ***************************************************************************/
-
-static int
-ov51x_init_isoc(struct usb_ov511 *ov)
-{
- struct urb *urb;
- int fx, err, n, i, size;
-
- PDEBUG(3, "*** Initializing capture ***");
-
- ov->curframe = -1;
-
- if (ov->bridge == BRG_OV511) {
- if (cams == 1)
- size = 993;
- else if (cams == 2)
- size = 513;
- else if (cams == 3 || cams == 4)
- size = 257;
- else {
- err("\"cams\" parameter too high!");
- return -1;
- }
- } else if (ov->bridge == BRG_OV511PLUS) {
- if (cams == 1)
- size = 961;
- else if (cams == 2)
- size = 513;
- else if (cams == 3 || cams == 4)
- size = 257;
- else if (cams >= 5 && cams <= 8)
- size = 129;
- else if (cams >= 9 && cams <= 31)
- size = 33;
- else {
- err("\"cams\" parameter too high!");
- return -1;
- }
- } else if (ov->bclass == BCL_OV518) {
- if (cams == 1)
- size = 896;
- else if (cams == 2)
- size = 512;
- else if (cams == 3 || cams == 4)
- size = 256;
- else if (cams >= 5 && cams <= 8)
- size = 128;
- else {
- err("\"cams\" parameter too high!");
- return -1;
- }
- } else {
- err("invalid bridge type");
- return -1;
- }
-
- // FIXME: OV518 is hardcoded to 15 FPS (alternate 5) for now
- if (ov->bclass == BCL_OV518) {
- if (packetsize == -1) {
- ov518_set_packet_size(ov, 640);
- } else {
- dev_info(&ov->dev->dev, "Forcing packet size to %d\n",
- packetsize);
- ov518_set_packet_size(ov, packetsize);
- }
- } else {
- if (packetsize == -1) {
- ov511_set_packet_size(ov, size);
- } else {
- dev_info(&ov->dev->dev, "Forcing packet size to %d\n",
- packetsize);
- ov511_set_packet_size(ov, packetsize);
- }
- }
-
- for (n = 0; n < OV511_NUMSBUF; n++) {
- urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
- if (!urb) {
- err("init isoc: usb_alloc_urb ret. NULL");
- for (i = 0; i < n; i++)
- usb_free_urb(ov->sbuf[i].urb);
- return -ENOMEM;
- }
- ov->sbuf[n].urb = urb;
- urb->dev = ov->dev;
- urb->context = &ov->sbuf[n];
- urb->pipe = usb_rcvisocpipe(ov->dev, OV511_ENDPOINT_ADDRESS);
- urb->transfer_flags = URB_ISO_ASAP;
- urb->transfer_buffer = ov->sbuf[n].data;
- urb->complete = ov51x_isoc_irq;
- urb->number_of_packets = FRAMES_PER_DESC;
- urb->transfer_buffer_length = ov->packet_size * FRAMES_PER_DESC;
- urb->interval = 1;
- for (fx = 0; fx < FRAMES_PER_DESC; fx++) {
- urb->iso_frame_desc[fx].offset = ov->packet_size * fx;
- urb->iso_frame_desc[fx].length = ov->packet_size;
- }
- }
-
- ov->streaming = 1;
-
- for (n = 0; n < OV511_NUMSBUF; n++) {
- ov->sbuf[n].urb->dev = ov->dev;
- err = usb_submit_urb(ov->sbuf[n].urb, GFP_KERNEL);
- if (err) {
- err("init isoc: usb_submit_urb(%d) ret %d", n, err);
- return err;
- }
- }
-
- return 0;
-}
-
-static void
-ov51x_unlink_isoc(struct usb_ov511 *ov)
-{
- int n;
-
- /* Unschedule all of the iso td's */
- for (n = OV511_NUMSBUF - 1; n >= 0; n--) {
- if (ov->sbuf[n].urb) {
- usb_kill_urb(ov->sbuf[n].urb);
- usb_free_urb(ov->sbuf[n].urb);
- ov->sbuf[n].urb = NULL;
- }
- }
-}
-
-static void
-ov51x_stop_isoc(struct usb_ov511 *ov)
-{
- if (!ov->streaming || !ov->dev)
- return;
-
- PDEBUG(3, "*** Stopping capture ***");
-
- if (ov->bclass == BCL_OV518)
- ov518_set_packet_size(ov, 0);
- else
- ov511_set_packet_size(ov, 0);
-
- ov->streaming = 0;
-
- ov51x_unlink_isoc(ov);
-}
-
-static int
-ov51x_new_frame(struct usb_ov511 *ov, int framenum)
-{
- struct ov511_frame *frame;
- int newnum;
-
- PDEBUG(4, "ov->curframe = %d, framenum = %d", ov->curframe, framenum);
-
- if (!ov->dev)
- return -1;
-
- /* If we're not grabbing a frame right now and the other frame is */
- /* ready to be grabbed into, then use it instead */
- if (ov->curframe == -1) {
- newnum = (framenum - 1 + OV511_NUMFRAMES) % OV511_NUMFRAMES;
- if (ov->frame[newnum].grabstate == FRAME_READY)
- framenum = newnum;
- } else
- return 0;
-
- frame = &ov->frame[framenum];
-
- PDEBUG(4, "framenum = %d, width = %d, height = %d", framenum,
- frame->width, frame->height);
-
- frame->grabstate = FRAME_GRABBING;
- frame->scanstate = STATE_SCANNING;
- frame->snapshot = 0;
-
- ov->curframe = framenum;
-
- /* Make sure it's not too big */
- if (frame->width > ov->maxwidth)
- frame->width = ov->maxwidth;
-
- frame->width &= ~7L; /* Multiple of 8 */
-
- if (frame->height > ov->maxheight)
- frame->height = ov->maxheight;
-
- frame->height &= ~3L; /* Multiple of 4 */
-
- return 0;
-}
-
-/****************************************************************************
- *
- * Buffer management
- *
- ***************************************************************************/
-
-/*
- * - You must acquire buf_lock before entering this function.
- * - Because this code will free any non-null pointer, you must be sure to null
- * them if you explicitly free them somewhere else!
- */
-static void
-ov51x_do_dealloc(struct usb_ov511 *ov)
-{
- int i;
- PDEBUG(4, "entered");
-
- if (ov->fbuf) {
- rvfree(ov->fbuf, OV511_NUMFRAMES
- * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight));
- ov->fbuf = NULL;
- }
-
- vfree(ov->rawfbuf);
- ov->rawfbuf = NULL;
-
- vfree(ov->tempfbuf);
- ov->tempfbuf = NULL;
-
- for (i = 0; i < OV511_NUMSBUF; i++) {
- kfree(ov->sbuf[i].data);
- ov->sbuf[i].data = NULL;
- }
-
- for (i = 0; i < OV511_NUMFRAMES; i++) {
- ov->frame[i].data = NULL;
- ov->frame[i].rawdata = NULL;
- ov->frame[i].tempdata = NULL;
- if (ov->frame[i].compbuf) {
- free_page((unsigned long) ov->frame[i].compbuf);
- ov->frame[i].compbuf = NULL;
- }
- }
-
- PDEBUG(4, "buffer memory deallocated");
- ov->buf_state = BUF_NOT_ALLOCATED;
- PDEBUG(4, "leaving");
-}
-
-static int
-ov51x_alloc(struct usb_ov511 *ov)
-{
- int i;
- const int w = ov->maxwidth;
- const int h = ov->maxheight;
- const int data_bufsize = OV511_NUMFRAMES * MAX_DATA_SIZE(w, h);
- const int raw_bufsize = OV511_NUMFRAMES * MAX_RAW_DATA_SIZE(w, h);
-
- PDEBUG(4, "entered");
- mutex_lock(&ov->buf_lock);
-
- if (ov->buf_state == BUF_ALLOCATED)
- goto out;
-
- ov->fbuf = rvmalloc(data_bufsize);
- if (!ov->fbuf)
- goto error;
-
- ov->rawfbuf = vmalloc(raw_bufsize);
- if (!ov->rawfbuf)
- goto error;
-
- memset(ov->rawfbuf, 0, raw_bufsize);
-
- ov->tempfbuf = vmalloc(raw_bufsize);
- if (!ov->tempfbuf)
- goto error;
-
- memset(ov->tempfbuf, 0, raw_bufsize);
-
- for (i = 0; i < OV511_NUMSBUF; i++) {
- ov->sbuf[i].data = kmalloc(FRAMES_PER_DESC *
- MAX_FRAME_SIZE_PER_DESC, GFP_KERNEL);
- if (!ov->sbuf[i].data)
- goto error;
-
- PDEBUG(4, "sbuf[%d] @ %p", i, ov->sbuf[i].data);
- }
-
- for (i = 0; i < OV511_NUMFRAMES; i++) {
- ov->frame[i].data = ov->fbuf + i * MAX_DATA_SIZE(w, h);
- ov->frame[i].rawdata = ov->rawfbuf
- + i * MAX_RAW_DATA_SIZE(w, h);
- ov->frame[i].tempdata = ov->tempfbuf
- + i * MAX_RAW_DATA_SIZE(w, h);
-
- ov->frame[i].compbuf =
- (unsigned char *) __get_free_page(GFP_KERNEL);
- if (!ov->frame[i].compbuf)
- goto error;
-
- PDEBUG(4, "frame[%d] @ %p", i, ov->frame[i].data);
- }
-
- ov->buf_state = BUF_ALLOCATED;
-out:
- mutex_unlock(&ov->buf_lock);
- PDEBUG(4, "leaving");
- return 0;
-error:
- ov51x_do_dealloc(ov);
- mutex_unlock(&ov->buf_lock);
- PDEBUG(4, "errored");
- return -ENOMEM;
-}
-
-static void
-ov51x_dealloc(struct usb_ov511 *ov)
-{
- PDEBUG(4, "entered");
- mutex_lock(&ov->buf_lock);
- ov51x_do_dealloc(ov);
- mutex_unlock(&ov->buf_lock);
- PDEBUG(4, "leaving");
-}
-
-/****************************************************************************
- *
- * V4L 1 API
- *
- ***************************************************************************/
-
-static int
-ov51x_v4l1_open(struct file *file)
-{
- struct video_device *vdev = video_devdata(file);
- struct usb_ov511 *ov = video_get_drvdata(vdev);
- int err, i;
-
- PDEBUG(4, "opening");
-
- mutex_lock(&ov->lock);
-
- err = -EBUSY;
- if (ov->user)
- goto out;
-
- ov->sub_flag = 0;
-
- /* In case app doesn't set them... */
- err = ov51x_set_default_params(ov);
- if (err < 0)
- goto out;
-
- /* Make sure frames are reset */
- for (i = 0; i < OV511_NUMFRAMES; i++) {
- ov->frame[i].grabstate = FRAME_UNUSED;
- ov->frame[i].bytes_read = 0;
- }
-
- /* If compression is on, make sure now that a
- * decompressor can be loaded */
- if (ov->compress && !ov->decomp_ops) {
- err = request_decompressor(ov);
- if (err && !dumppix)
- goto out;
- }
-
- err = ov51x_alloc(ov);
- if (err < 0)
- goto out;
-
- err = ov51x_init_isoc(ov);
- if (err) {
- ov51x_dealloc(ov);
- goto out;
- }
-
- ov->user++;
- file->private_data = vdev;
-
- if (ov->led_policy == LED_AUTO)
- ov51x_led_control(ov, 1);
-
-out:
- mutex_unlock(&ov->lock);
- return err;
-}
-
-static int
-ov51x_v4l1_close(struct file *file)
-{
- struct video_device *vdev = file->private_data;
- struct usb_ov511 *ov = video_get_drvdata(vdev);
-
- PDEBUG(4, "ov511_close");
-
- mutex_lock(&ov->lock);
-
- ov->user--;
- ov51x_stop_isoc(ov);
-
- if (ov->led_policy == LED_AUTO)
- ov51x_led_control(ov, 0);
-
- if (ov->dev)
- ov51x_dealloc(ov);
-
- mutex_unlock(&ov->lock);
-
- /* Device unplugged while open. Only a minimum of unregistration is done
- * here; the disconnect callback already did the rest. */
- if (!ov->dev) {
- mutex_lock(&ov->cbuf_lock);
- kfree(ov->cbuf);
- ov->cbuf = NULL;
- mutex_unlock(&ov->cbuf_lock);
-
- ov51x_dealloc(ov);
- kfree(ov);
- ov = NULL;
- }
-
- file->private_data = NULL;
- return 0;
-}
-
-/* Do not call this function directly! */
-static long
-ov51x_v4l1_ioctl_internal(struct file *file, unsigned int cmd, void *arg)
-{
- struct video_device *vdev = file->private_data;
- struct usb_ov511 *ov = video_get_drvdata(vdev);
- PDEBUG(5, "IOCtl: 0x%X", cmd);
-
- if (!ov->dev)
- return -EIO;
-
- switch (cmd) {
- case VIDIOCGCAP:
- {
- struct video_capability *b = arg;
-
- PDEBUG(4, "VIDIOCGCAP");
-
- memset(b, 0, sizeof(struct video_capability));
- sprintf(b->name, "%s USB Camera",
- symbolic(brglist, ov->bridge));
- b->type = VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE;
- b->channels = ov->num_inputs;
- b->audios = 0;
- b->maxwidth = ov->maxwidth;
- b->maxheight = ov->maxheight;
- b->minwidth = ov->minwidth;
- b->minheight = ov->minheight;
-
- return 0;
- }
- case VIDIOCGCHAN:
- {
- struct video_channel *v = arg;
-
- PDEBUG(4, "VIDIOCGCHAN");
-
- if ((unsigned)(v->channel) >= ov->num_inputs) {
- err("Invalid channel (%d)", v->channel);
- return -EINVAL;
- }
-
- v->norm = ov->norm;
- v->type = VIDEO_TYPE_CAMERA;
- v->flags = 0;
-// v->flags |= (ov->has_decoder) ? VIDEO_VC_NORM : 0;
- v->tuners = 0;
- decoder_get_input_name(ov, v->channel, v->name);
-
- return 0;
- }
- case VIDIOCSCHAN:
- {
- struct video_channel *v = arg;
- int err;
-
- PDEBUG(4, "VIDIOCSCHAN");
-
- /* Make sure it's not a camera */
- if (!ov->has_decoder) {
- if (v->channel == 0)
- return 0;
- else
- return -EINVAL;
- }
-
- if (v->norm != VIDEO_MODE_PAL &&
- v->norm != VIDEO_MODE_NTSC &&
- v->norm != VIDEO_MODE_SECAM &&
- v->norm != VIDEO_MODE_AUTO) {
- err("Invalid norm (%d)", v->norm);
- return -EINVAL;
- }
-
- if ((unsigned)(v->channel) >= ov->num_inputs) {
- err("Invalid channel (%d)", v->channel);
- return -EINVAL;
- }
-
- err = decoder_set_input(ov, v->channel);
- if (err)
- return err;
-
- err = decoder_set_norm(ov, v->norm);
- if (err)
- return err;
-
- return 0;
- }
- case VIDIOCGPICT:
- {
- struct video_picture *p = arg;
-
- PDEBUG(4, "VIDIOCGPICT");
-
- memset(p, 0, sizeof(struct video_picture));
- if (sensor_get_picture(ov, p))
- return -EIO;
-
- /* Can we get these from frame[0]? -claudio? */
- p->depth = ov->frame[0].depth;
- p->palette = ov->frame[0].format;
-
- return 0;
- }
- case VIDIOCSPICT:
- {
- struct video_picture *p = arg;
- int i, rc;
-
- PDEBUG(4, "VIDIOCSPICT");
-
- if (!get_depth(p->palette))
- return -EINVAL;
-
- if (sensor_set_picture(ov, p))
- return -EIO;
-
- if (force_palette && p->palette != force_palette) {
- dev_info(&ov->dev->dev, "Palette rejected (%s)\n",
- symbolic(v4l1_plist, p->palette));
- return -EINVAL;
- }
-
- // FIXME: Format should be independent of frames
- if (p->palette != ov->frame[0].format) {
- PDEBUG(4, "Detected format change");
-
- rc = ov51x_wait_frames_inactive(ov);
- if (rc)
- return rc;
-
- mode_init_regs(ov, ov->frame[0].width,
- ov->frame[0].height, p->palette, ov->sub_flag);
- }
-
- PDEBUG(4, "Setting depth=%d, palette=%s",
- p->depth, symbolic(v4l1_plist, p->palette));
-
- for (i = 0; i < OV511_NUMFRAMES; i++) {
- ov->frame[i].depth = p->depth;
- ov->frame[i].format = p->palette;
- }
-
- return 0;
- }
- case VIDIOCGCAPTURE:
- {
- int *vf = arg;
-
- PDEBUG(4, "VIDIOCGCAPTURE");
-
- ov->sub_flag = *vf;
- return 0;
- }
- case VIDIOCSCAPTURE:
- {
- struct video_capture *vc = arg;
-
- PDEBUG(4, "VIDIOCSCAPTURE");
-
- if (vc->flags)
- return -EINVAL;
- if (vc->decimation)
- return -EINVAL;
-
- vc->x &= ~3L;
- vc->y &= ~1L;
- vc->y &= ~31L;
-
- if (vc->width == 0)
- vc->width = 32;
-
- vc->height /= 16;
- vc->height *= 16;
- if (vc->height == 0)
- vc->height = 16;
-
- ov->subx = vc->x;
- ov->suby = vc->y;
- ov->subw = vc->width;
- ov->subh = vc->height;
-
- return 0;
- }
- case VIDIOCSWIN:
- {
- struct video_window *vw = arg;
- int i, rc;
-
- PDEBUG(4, "VIDIOCSWIN: %dx%d", vw->width, vw->height);
-
-#if 0
- if (vw->flags)
- return -EINVAL;
- if (vw->clipcount)
- return -EINVAL;
- if (vw->height != ov->maxheight)
- return -EINVAL;
- if (vw->width != ov->maxwidth)
- return -EINVAL;
-#endif
-
- rc = ov51x_wait_frames_inactive(ov);
- if (rc)
- return rc;
-
- rc = mode_init_regs(ov, vw->width, vw->height,
- ov->frame[0].format, ov->sub_flag);
- if (rc < 0)
- return rc;
-
- for (i = 0; i < OV511_NUMFRAMES; i++) {
- ov->frame[i].width = vw->width;
- ov->frame[i].height = vw->height;
- }
-
- return 0;
- }
- case VIDIOCGWIN:
- {
- struct video_window *vw = arg;
-
- memset(vw, 0, sizeof(struct video_window));
- vw->x = 0; /* FIXME */
- vw->y = 0;
- vw->width = ov->frame[0].width;
- vw->height = ov->frame[0].height;
- vw->flags = 30;
-
- PDEBUG(4, "VIDIOCGWIN: %dx%d", vw->width, vw->height);
-
- return 0;
- }
- case VIDIOCGMBUF:
- {
- struct video_mbuf *vm = arg;
- int i;
-
- PDEBUG(4, "VIDIOCGMBUF");
-
- memset(vm, 0, sizeof(struct video_mbuf));
- vm->size = OV511_NUMFRAMES
- * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight);
- vm->frames = OV511_NUMFRAMES;
-
- vm->offsets[0] = 0;
- for (i = 1; i < OV511_NUMFRAMES; i++) {
- vm->offsets[i] = vm->offsets[i-1]
- + MAX_DATA_SIZE(ov->maxwidth, ov->maxheight);
- }
-
- return 0;
- }
- case VIDIOCMCAPTURE:
- {
- struct video_mmap *vm = arg;
- int rc, depth;
- unsigned int f = vm->frame;
-
- PDEBUG(4, "VIDIOCMCAPTURE: frame: %d, %dx%d, %s", f, vm->width,
- vm->height, symbolic(v4l1_plist, vm->format));
-
- depth = get_depth(vm->format);
- if (!depth) {
- PDEBUG(2, "VIDIOCMCAPTURE: invalid format (%s)",
- symbolic(v4l1_plist, vm->format));
- return -EINVAL;
- }
-
- if (f >= OV511_NUMFRAMES) {
- err("VIDIOCMCAPTURE: invalid frame (%d)", f);
- return -EINVAL;
- }
-
- if (vm->width > ov->maxwidth
- || vm->height > ov->maxheight) {
- err("VIDIOCMCAPTURE: requested dimensions too big");
- return -EINVAL;
- }
-
- if (ov->frame[f].grabstate == FRAME_GRABBING) {
- PDEBUG(4, "VIDIOCMCAPTURE: already grabbing");
- return -EBUSY;
- }
-
- if (force_palette && (vm->format != force_palette)) {
- PDEBUG(2, "palette rejected (%s)",
- symbolic(v4l1_plist, vm->format));
- return -EINVAL;
- }
-
- if ((ov->frame[f].width != vm->width) ||
- (ov->frame[f].height != vm->height) ||
- (ov->frame[f].format != vm->format) ||
- (ov->frame[f].sub_flag != ov->sub_flag) ||
- (ov->frame[f].depth != depth)) {
- PDEBUG(4, "VIDIOCMCAPTURE: change in image parameters");
-
- rc = ov51x_wait_frames_inactive(ov);
- if (rc)
- return rc;
-
- rc = mode_init_regs(ov, vm->width, vm->height,
- vm->format, ov->sub_flag);
-#if 0
- if (rc < 0) {
- PDEBUG(1, "Got error while initializing regs ");
- return ret;
- }
-#endif
- ov->frame[f].width = vm->width;
- ov->frame[f].height = vm->height;
- ov->frame[f].format = vm->format;
- ov->frame[f].sub_flag = ov->sub_flag;
- ov->frame[f].depth = depth;
- }
-
- /* Mark it as ready */
- ov->frame[f].grabstate = FRAME_READY;
-
- PDEBUG(4, "VIDIOCMCAPTURE: renewing frame %d", f);
-
- return ov51x_new_frame(ov, f);
- }
- case VIDIOCSYNC:
- {
- unsigned int fnum = *((unsigned int *) arg);
- struct ov511_frame *frame;
- int rc;
-
- if (fnum >= OV511_NUMFRAMES) {
- err("VIDIOCSYNC: invalid frame (%d)", fnum);
- return -EINVAL;
- }
-
- frame = &ov->frame[fnum];
-
- PDEBUG(4, "syncing to frame %d, grabstate = %d", fnum,
- frame->grabstate);
-
- switch (frame->grabstate) {
- case FRAME_UNUSED:
- return -EINVAL;
- case FRAME_READY:
- case FRAME_GRABBING:
- case FRAME_ERROR:
-redo:
- if (!ov->dev)
- return -EIO;
-
- rc = wait_event_interruptible(frame->wq,
- (frame->grabstate == FRAME_DONE)
- || (frame->grabstate == FRAME_ERROR));
-
- if (rc)
- return rc;
-
- if (frame->grabstate == FRAME_ERROR) {
- if ((rc = ov51x_new_frame(ov, fnum)) < 0)
- return rc;
- goto redo;
- }
- /* Fall through */
- case FRAME_DONE:
- if (ov->snap_enabled && !frame->snapshot) {
- if ((rc = ov51x_new_frame(ov, fnum)) < 0)
- return rc;
- goto redo;
- }
-
- frame->grabstate = FRAME_UNUSED;
-
- /* Reset the hardware snapshot button */
- /* FIXME - Is this the best place for this? */
- if ((ov->snap_enabled) && (frame->snapshot)) {
- frame->snapshot = 0;
- ov51x_clear_snapshot(ov);
- }
-
- /* Decompression, format conversion, etc... */
- ov51x_postprocess(ov, frame);
-
- break;
- } /* end switch */
-
- return 0;
- }
- case VIDIOCGFBUF:
- {
- struct video_buffer *vb = arg;
-
- PDEBUG(4, "VIDIOCGFBUF");
-
- memset(vb, 0, sizeof(struct video_buffer));
-
- return 0;
- }
- case VIDIOCGUNIT:
- {
- struct video_unit *vu = arg;
-
- PDEBUG(4, "VIDIOCGUNIT");
-
- memset(vu, 0, sizeof(struct video_unit));
-
- vu->video = ov->vdev->minor;
- vu->vbi = VIDEO_NO_UNIT;
- vu->radio = VIDEO_NO_UNIT;
- vu->audio = VIDEO_NO_UNIT;
- vu->teletext = VIDEO_NO_UNIT;
-
- return 0;
- }
- case OV511IOC_WI2C:
- {
- struct ov511_i2c_struct *w = arg;
-
- return i2c_w_slave(ov, w->slave, w->reg, w->value, w->mask);
- }
- case OV511IOC_RI2C:
- {
- struct ov511_i2c_struct *r = arg;
- int rc;
-
- rc = i2c_r_slave(ov, r->slave, r->reg);
- if (rc < 0)
- return rc;
-
- r->value = rc;
- return 0;
- }
- default:
- PDEBUG(3, "Unsupported IOCtl: 0x%X", cmd);
- return -ENOIOCTLCMD;
- } /* end switch */
-
- return 0;
-}
-
-static long
-ov51x_v4l1_ioctl(struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct video_device *vdev = file->private_data;
- struct usb_ov511 *ov = video_get_drvdata(vdev);
- int rc;
-
- if (mutex_lock_interruptible(&ov->lock))
- return -EINTR;
-
- rc = video_usercopy(file, cmd, arg, ov51x_v4l1_ioctl_internal);
-
- mutex_unlock(&ov->lock);
- return rc;
-}
-
-static ssize_t
-ov51x_v4l1_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos)
-{
- struct video_device *vdev = file->private_data;
- int noblock = file->f_flags&O_NONBLOCK;
- unsigned long count = cnt;
- struct usb_ov511 *ov = video_get_drvdata(vdev);
- int i, rc = 0, frmx = -1;
- struct ov511_frame *frame;
-
- if (mutex_lock_interruptible(&ov->lock))
- return -EINTR;
-
- PDEBUG(4, "%ld bytes, noblock=%d", count, noblock);
-
- if (!vdev || !buf) {
- rc = -EFAULT;
- goto error;
- }
-
- if (!ov->dev) {
- rc = -EIO;
- goto error;
- }
-
-// FIXME: Only supports two frames
- /* See if a frame is completed, then use it. */
- if (ov->frame[0].grabstate >= FRAME_DONE) /* _DONE or _ERROR */
- frmx = 0;
- else if (ov->frame[1].grabstate >= FRAME_DONE)/* _DONE or _ERROR */
- frmx = 1;
-
- /* If nonblocking we return immediately */
- if (noblock && (frmx == -1)) {
- rc = -EAGAIN;
- goto error;
- }
-
- /* If no FRAME_DONE, look for a FRAME_GRABBING state. */
- /* See if a frame is in process (grabbing), then use it. */
- if (frmx == -1) {
- if (ov->frame[0].grabstate == FRAME_GRABBING)
- frmx = 0;
- else if (ov->frame[1].grabstate == FRAME_GRABBING)
- frmx = 1;
- }
-
- /* If no frame is active, start one. */
- if (frmx == -1) {
- if ((rc = ov51x_new_frame(ov, frmx = 0))) {
- err("read: ov51x_new_frame error");
- goto error;
- }
- }
-
- frame = &ov->frame[frmx];
-
-restart:
- if (!ov->dev) {
- rc = -EIO;
- goto error;
- }
-
- /* Wait while we're grabbing the image */
- PDEBUG(4, "Waiting image grabbing");
- rc = wait_event_interruptible(frame->wq,
- (frame->grabstate == FRAME_DONE)
- || (frame->grabstate == FRAME_ERROR));
-
- if (rc)
- goto error;
-
- PDEBUG(4, "Got image, frame->grabstate = %d", frame->grabstate);
- PDEBUG(4, "bytes_recvd = %d", frame->bytes_recvd);
-
- if (frame->grabstate == FRAME_ERROR) {
- frame->bytes_read = 0;
- err("** ick! ** Errored frame %d", ov->curframe);
- if (ov51x_new_frame(ov, frmx)) {
- err("read: ov51x_new_frame error");
- goto error;
- }
- goto restart;
- }
-
-
- /* Repeat until we get a snapshot frame */
- if (ov->snap_enabled)
- PDEBUG(4, "Waiting snapshot frame");
- if (ov->snap_enabled && !frame->snapshot) {
- frame->bytes_read = 0;
- if ((rc = ov51x_new_frame(ov, frmx))) {
- err("read: ov51x_new_frame error");
- goto error;
- }
- goto restart;
- }
-
- /* Clear the snapshot */
- if (ov->snap_enabled && frame->snapshot) {
- frame->snapshot = 0;
- ov51x_clear_snapshot(ov);
- }
-
- /* Decompression, format conversion, etc... */
- ov51x_postprocess(ov, frame);
-
- PDEBUG(4, "frmx=%d, bytes_read=%ld, length=%ld", frmx,
- frame->bytes_read,
- get_frame_length(frame));
-
- /* copy bytes to user space; we allow for partials reads */
-// if ((count + frame->bytes_read)
-// > get_frame_length((struct ov511_frame *)frame))
-// count = frame->scanlength - frame->bytes_read;
-
- /* FIXME - count hardwired to be one frame... */
- count = get_frame_length(frame);
-
- PDEBUG(4, "Copy to user space: %ld bytes", count);
- if ((i = copy_to_user(buf, frame->data + frame->bytes_read, count))) {
- PDEBUG(4, "Copy failed! %d bytes not copied", i);
- rc = -EFAULT;
- goto error;
- }
-
- frame->bytes_read += count;
- PDEBUG(4, "{copy} count used=%ld, new bytes_read=%ld",
- count, frame->bytes_read);
-
- /* If all data have been read... */
- if (frame->bytes_read
- >= get_frame_length(frame)) {
- frame->bytes_read = 0;
-
-// FIXME: Only supports two frames
- /* Mark it as available to be used again. */
- ov->frame[frmx].grabstate = FRAME_UNUSED;
- if ((rc = ov51x_new_frame(ov, !frmx))) {
- err("ov51x_new_frame returned error");
- goto error;
- }
- }
-
- PDEBUG(4, "read finished, returning %ld (sweet)", count);
-
- mutex_unlock(&ov->lock);
- return count;
-
-error:
- mutex_unlock(&ov->lock);
- return rc;
-}
-
-static int
-ov51x_v4l1_mmap(struct file *file, struct vm_area_struct *vma)
-{
- struct video_device *vdev = file->private_data;
- unsigned long start = vma->vm_start;
- unsigned long size = vma->vm_end - vma->vm_start;
- struct usb_ov511 *ov = video_get_drvdata(vdev);
- unsigned long page, pos;
-
- if (ov->dev == NULL)
- return -EIO;
-
- PDEBUG(4, "mmap: %ld (%lX) bytes", size, size);
-
- if (size > (((OV511_NUMFRAMES
- * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight)
- + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))))
- return -EINVAL;
-
- if (mutex_lock_interruptible(&ov->lock))
- return -EINTR;
-
- pos = (unsigned long)ov->fbuf;
- while (size > 0) {
- page = vmalloc_to_pfn((void *)pos);
- if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
- mutex_unlock(&ov->lock);
- return -EAGAIN;
- }
- start += PAGE_SIZE;
- pos += PAGE_SIZE;
- if (size > PAGE_SIZE)
- size -= PAGE_SIZE;
- else
- size = 0;
- }
-
- mutex_unlock(&ov->lock);
- return 0;
-}
-
-static const struct v4l2_file_operations ov511_fops = {
- .owner = THIS_MODULE,
- .open = ov51x_v4l1_open,
- .release = ov51x_v4l1_close,
- .read = ov51x_v4l1_read,
- .mmap = ov51x_v4l1_mmap,
- .ioctl = ov51x_v4l1_ioctl,
-};
-
-static struct video_device vdev_template = {
- .name = "OV511 USB Camera",
- .fops = &ov511_fops,
- .release = video_device_release,
-};
-
-/****************************************************************************
- *
- * OV511 and sensor configuration
- *
- ***************************************************************************/
-
-/* This initializes the OV7610, OV7620, or OV76BE sensor. The OV76BE uses
- * the same register settings as the OV7610, since they are very similar.
- */
-static int
-ov7xx0_configure(struct usb_ov511 *ov)
-{
- int i, success;
- int rc;
-
- /* Lawrence Glaister <lg@jfm.bc.ca> reports:
- *
- * Register 0x0f in the 7610 has the following effects:
- *
- * 0x85 (AEC method 1): Best overall, good contrast range
- * 0x45 (AEC method 2): Very overexposed
- * 0xa5 (spec sheet default): Ok, but the black level is
- * shifted resulting in loss of contrast
- * 0x05 (old driver setting): very overexposed, too much
- * contrast
- */
- static struct ov511_regvals aRegvalsNorm7610[] = {
- { OV511_I2C_BUS, 0x10, 0xff },
- { OV511_I2C_BUS, 0x16, 0x06 },
- { OV511_I2C_BUS, 0x28, 0x24 },
- { OV511_I2C_BUS, 0x2b, 0xac },
- { OV511_I2C_BUS, 0x12, 0x00 },
- { OV511_I2C_BUS, 0x38, 0x81 },
- { OV511_I2C_BUS, 0x28, 0x24 }, /* 0c */
- { OV511_I2C_BUS, 0x0f, 0x85 }, /* lg's setting */
- { OV511_I2C_BUS, 0x15, 0x01 },
- { OV511_I2C_BUS, 0x20, 0x1c },
- { OV511_I2C_BUS, 0x23, 0x2a },
- { OV511_I2C_BUS, 0x24, 0x10 },
- { OV511_I2C_BUS, 0x25, 0x8a },
- { OV511_I2C_BUS, 0x26, 0xa2 },
- { OV511_I2C_BUS, 0x27, 0xc2 },
- { OV511_I2C_BUS, 0x2a, 0x04 },
- { OV511_I2C_BUS, 0x2c, 0xfe },
- { OV511_I2C_BUS, 0x2d, 0x93 },
- { OV511_I2C_BUS, 0x30, 0x71 },
- { OV511_I2C_BUS, 0x31, 0x60 },
- { OV511_I2C_BUS, 0x32, 0x26 },
- { OV511_I2C_BUS, 0x33, 0x20 },
- { OV511_I2C_BUS, 0x34, 0x48 },
- { OV511_I2C_BUS, 0x12, 0x24 },
- { OV511_I2C_BUS, 0x11, 0x01 },
- { OV511_I2C_BUS, 0x0c, 0x24 },
- { OV511_I2C_BUS, 0x0d, 0x24 },
- { OV511_DONE_BUS, 0x0, 0x00 },
- };
-
- static struct ov511_regvals aRegvalsNorm7620[] = {
- { OV511_I2C_BUS, 0x00, 0x00 },
- { OV511_I2C_BUS, 0x01, 0x80 },
- { OV511_I2C_BUS, 0x02, 0x80 },
- { OV511_I2C_BUS, 0x03, 0xc0 },
- { OV511_I2C_BUS, 0x06, 0x60 },
- { OV511_I2C_BUS, 0x07, 0x00 },
- { OV511_I2C_BUS, 0x0c, 0x24 },
- { OV511_I2C_BUS, 0x0c, 0x24 },
- { OV511_I2C_BUS, 0x0d, 0x24 },
- { OV511_I2C_BUS, 0x11, 0x01 },
- { OV511_I2C_BUS, 0x12, 0x24 },
- { OV511_I2C_BUS, 0x13, 0x01 },
- { OV511_I2C_BUS, 0x14, 0x84 },
- { OV511_I2C_BUS, 0x15, 0x01 },
- { OV511_I2C_BUS, 0x16, 0x03 },
- { OV511_I2C_BUS, 0x17, 0x2f },
- { OV511_I2C_BUS, 0x18, 0xcf },
- { OV511_I2C_BUS, 0x19, 0x06 },
- { OV511_I2C_BUS, 0x1a, 0xf5 },
- { OV511_I2C_BUS, 0x1b, 0x00 },
- { OV511_I2C_BUS, 0x20, 0x18 },
- { OV511_I2C_BUS, 0x21, 0x80 },
- { OV511_I2C_BUS, 0x22, 0x80 },
- { OV511_I2C_BUS, 0x23, 0x00 },
- { OV511_I2C_BUS, 0x26, 0xa2 },
- { OV511_I2C_BUS, 0x27, 0xea },
- { OV511_I2C_BUS, 0x28, 0x20 },
- { OV511_I2C_BUS, 0x29, 0x00 },
- { OV511_I2C_BUS, 0x2a, 0x10 },
- { OV511_I2C_BUS, 0x2b, 0x00 },
- { OV511_I2C_BUS, 0x2c, 0x88 },
- { OV511_I2C_BUS, 0x2d, 0x91 },
- { OV511_I2C_BUS, 0x2e, 0x80 },
- { OV511_I2C_BUS, 0x2f, 0x44 },
- { OV511_I2C_BUS, 0x60, 0x27 },
- { OV511_I2C_BUS, 0x61, 0x02 },
- { OV511_I2C_BUS, 0x62, 0x5f },
- { OV511_I2C_BUS, 0x63, 0xd5 },
- { OV511_I2C_BUS, 0x64, 0x57 },
- { OV511_I2C_BUS, 0x65, 0x83 },
- { OV511_I2C_BUS, 0x66, 0x55 },
- { OV511_I2C_BUS, 0x67, 0x92 },
- { OV511_I2C_BUS, 0x68, 0xcf },
- { OV511_I2C_BUS, 0x69, 0x76 },
- { OV511_I2C_BUS, 0x6a, 0x22 },
- { OV511_I2C_BUS, 0x6b, 0x00 },
- { OV511_I2C_BUS, 0x6c, 0x02 },
- { OV511_I2C_BUS, 0x6d, 0x44 },
- { OV511_I2C_BUS, 0x6e, 0x80 },
- { OV511_I2C_BUS, 0x6f, 0x1d },
- { OV511_I2C_BUS, 0x70, 0x8b },
- { OV511_I2C_BUS, 0x71, 0x00 },
- { OV511_I2C_BUS, 0x72, 0x14 },
- { OV511_I2C_BUS, 0x73, 0x54 },
- { OV511_I2C_BUS, 0x74, 0x00 },
- { OV511_I2C_BUS, 0x75, 0x8e },
- { OV511_I2C_BUS, 0x76, 0x00 },
- { OV511_I2C_BUS, 0x77, 0xff },
- { OV511_I2C_BUS, 0x78, 0x80 },
- { OV511_I2C_BUS, 0x79, 0x80 },
- { OV511_I2C_BUS, 0x7a, 0x80 },
- { OV511_I2C_BUS, 0x7b, 0xe2 },
- { OV511_I2C_BUS, 0x7c, 0x00 },
- { OV511_DONE_BUS, 0x0, 0x00 },
- };
-
- PDEBUG(4, "starting configuration");
-
- /* This looks redundant, but is necessary for WebCam 3 */
- ov->primary_i2c_slave = OV7xx0_SID;
- if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0)
- return -1;
-
- if (init_ov_sensor(ov) >= 0) {
- PDEBUG(1, "OV7xx0 sensor initalized (method 1)");
- } else {
- /* Reset the 76xx */
- if (i2c_w(ov, 0x12, 0x80) < 0)
- return -1;
-
- /* Wait for it to initialize */
- msleep(150);
-
- i = 0;
- success = 0;
- while (i <= i2c_detect_tries) {
- if ((i2c_r(ov, OV7610_REG_ID_HIGH) == 0x7F) &&
- (i2c_r(ov, OV7610_REG_ID_LOW) == 0xA2)) {
- success = 1;
- break;
- } else {
- i++;
- }
- }
-
-// Was (i == i2c_detect_tries) previously. This obviously used to always report
-// success. Whether anyone actually depended on that bug is unknown
- if ((i >= i2c_detect_tries) && (success == 0)) {
- err("Failed to read sensor ID. You might not have an");
- err("OV7610/20, or it may be not responding. Report");
- err("this to " EMAIL);
- err("This is only a warning. You can attempt to use");
- err("your camera anyway");
-// Only issue a warning for now
-// return -1;
- } else {
- PDEBUG(1, "OV7xx0 initialized (method 2, %dx)", i+1);
- }
- }
-
- /* Detect sensor (sub)type */
- rc = i2c_r(ov, OV7610_REG_COM_I);
-
- if (rc < 0) {
- err("Error detecting sensor type");
- return -1;
- } else if ((rc & 3) == 3) {
- dev_info(&ov->dev->dev, "Sensor is an OV7610\n");
- ov->sensor = SEN_OV7610;
- } else if ((rc & 3) == 1) {
- /* I don't know what's different about the 76BE yet. */
- if (i2c_r(ov, 0x15) & 1)
- dev_info(&ov->dev->dev, "Sensor is an OV7620AE\n");
- else
- dev_info(&ov->dev->dev, "Sensor is an OV76BE\n");
-
- /* OV511+ will return all zero isoc data unless we
- * configure the sensor as a 7620. Someone needs to
- * find the exact reg. setting that causes this. */
- if (ov->bridge == BRG_OV511PLUS) {
- dev_info(&ov->dev->dev,
- "Enabling 511+/7620AE workaround\n");
- ov->sensor = SEN_OV7620;
- } else {
- ov->sensor = SEN_OV76BE;
- }
- } else if ((rc & 3) == 0) {
- dev_info(&ov->dev->dev, "Sensor is an OV7620\n");
- ov->sensor = SEN_OV7620;
- } else {
- err("Unknown image sensor version: %d", rc & 3);
- return -1;
- }
-
- if (ov->sensor == SEN_OV7620) {
- PDEBUG(4, "Writing 7620 registers");
- if (write_regvals(ov, aRegvalsNorm7620))
- return -1;
- } else {
- PDEBUG(4, "Writing 7610 registers");
- if (write_regvals(ov, aRegvalsNorm7610))
- return -1;
- }
-
- /* Set sensor-specific vars */
- ov->maxwidth = 640;
- ov->maxheight = 480;
- ov->minwidth = 64;
- ov->minheight = 48;
-
- // FIXME: These do not match the actual settings yet
- ov->brightness = 0x80 << 8;
- ov->contrast = 0x80 << 8;
- ov->colour = 0x80 << 8;
- ov->hue = 0x80 << 8;
-
- return 0;
-}
-
-/* This initializes the OV6620, OV6630, OV6630AE, or OV6630AF sensor. */
-static int
-ov6xx0_configure(struct usb_ov511 *ov)
-{
- int rc;
-
- static struct ov511_regvals aRegvalsNorm6x20[] = {
- { OV511_I2C_BUS, 0x12, 0x80 }, /* reset */
- { OV511_I2C_BUS, 0x11, 0x01 },
- { OV511_I2C_BUS, 0x03, 0x60 },
- { OV511_I2C_BUS, 0x05, 0x7f }, /* For when autoadjust is off */
- { OV511_I2C_BUS, 0x07, 0xa8 },
- /* The ratio of 0x0c and 0x0d controls the white point */
- { OV511_I2C_BUS, 0x0c, 0x24 },
- { OV511_I2C_BUS, 0x0d, 0x24 },
- { OV511_I2C_BUS, 0x0f, 0x15 }, /* COMS */
- { OV511_I2C_BUS, 0x10, 0x75 }, /* AEC Exposure time */
- { OV511_I2C_BUS, 0x12, 0x24 }, /* Enable AGC */
- { OV511_I2C_BUS, 0x14, 0x04 },
- /* 0x16: 0x06 helps frame stability with moving objects */
- { OV511_I2C_BUS, 0x16, 0x06 },
-// { OV511_I2C_BUS, 0x20, 0x30 }, /* Aperture correction enable */
- { OV511_I2C_BUS, 0x26, 0xb2 }, /* BLC enable */
- /* 0x28: 0x05 Selects RGB format if RGB on */
- { OV511_I2C_BUS, 0x28, 0x05 },
- { OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */
-// { OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */
- { OV511_I2C_BUS, 0x2d, 0x99 },
- { OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Processing Parameter */
- { OV511_I2C_BUS, 0x34, 0xd2 }, /* Max A/D range */
- { OV511_I2C_BUS, 0x38, 0x8b },
- { OV511_I2C_BUS, 0x39, 0x40 },
-
- { OV511_I2C_BUS, 0x3c, 0x39 }, /* Enable AEC mode changing */
- { OV511_I2C_BUS, 0x3c, 0x3c }, /* Change AEC mode */
- { OV511_I2C_BUS, 0x3c, 0x24 }, /* Disable AEC mode changing */
-
- { OV511_I2C_BUS, 0x3d, 0x80 },
- /* These next two registers (0x4a, 0x4b) are undocumented. They
- * control the color balance */
- { OV511_I2C_BUS, 0x4a, 0x80 },
- { OV511_I2C_BUS, 0x4b, 0x80 },
- { OV511_I2C_BUS, 0x4d, 0xd2 }, /* This reduces noise a bit */
- { OV511_I2C_BUS, 0x4e, 0xc1 },
- { OV511_I2C_BUS, 0x4f, 0x04 },
-// Do 50-53 have any effect?
-// Toggle 0x12[2] off and on here?
- { OV511_DONE_BUS, 0x0, 0x00 }, /* END MARKER */
- };
-
- static struct ov511_regvals aRegvalsNorm6x30[] = {
- /*OK*/ { OV511_I2C_BUS, 0x12, 0x80 }, /* reset */
- { OV511_I2C_BUS, 0x11, 0x00 },
- /*OK*/ { OV511_I2C_BUS, 0x03, 0x60 },
- /*0A?*/ { OV511_I2C_BUS, 0x05, 0x7f }, /* For when autoadjust is off */
- { OV511_I2C_BUS, 0x07, 0xa8 },
- /* The ratio of 0x0c and 0x0d controls the white point */
- /*OK*/ { OV511_I2C_BUS, 0x0c, 0x24 },
- /*OK*/ { OV511_I2C_BUS, 0x0d, 0x24 },
- /*A*/ { OV511_I2C_BUS, 0x0e, 0x20 },
-// /*04?*/ { OV511_I2C_BUS, 0x14, 0x80 },
- { OV511_I2C_BUS, 0x16, 0x03 },
-// /*OK*/ { OV511_I2C_BUS, 0x20, 0x30 }, /* Aperture correction enable */
- // 21 & 22? The suggested values look wrong. Go with default
- /*A*/ { OV511_I2C_BUS, 0x23, 0xc0 },
- /*A*/ { OV511_I2C_BUS, 0x25, 0x9a }, // Check this against default
-// /*OK*/ { OV511_I2C_BUS, 0x26, 0xb2 }, /* BLC enable */
-
- /* 0x28: 0x05 Selects RGB format if RGB on */
-// /*04?*/ { OV511_I2C_BUS, 0x28, 0x05 },
-// /*04?*/ { OV511_I2C_BUS, 0x28, 0x45 }, // DEBUG: Tristate UV bus
-
- /*OK*/ { OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */
-// /*OK*/ { OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */
- { OV511_I2C_BUS, 0x2d, 0x99 },
-// /*A*/ { OV511_I2C_BUS, 0x33, 0x26 }, // Reserved bits on 6620
-// /*d2?*/ { OV511_I2C_BUS, 0x34, 0x03 }, /* Max A/D range */
-// /*8b?*/ { OV511_I2C_BUS, 0x38, 0x83 },
-// /*40?*/ { OV511_I2C_BUS, 0x39, 0xc0 }, // 6630 adds bit 7
-// { OV511_I2C_BUS, 0x3c, 0x39 }, /* Enable AEC mode changing */
-// { OV511_I2C_BUS, 0x3c, 0x3c }, /* Change AEC mode */
-// { OV511_I2C_BUS, 0x3c, 0x24 }, /* Disable AEC mode changing */
- { OV511_I2C_BUS, 0x3d, 0x80 },
-// /*A*/ { OV511_I2C_BUS, 0x3f, 0x0e },
-
- /* These next two registers (0x4a, 0x4b) are undocumented. They
- * control the color balance */
-// /*OK?*/ { OV511_I2C_BUS, 0x4a, 0x80 }, // Check these
-// /*OK?*/ { OV511_I2C_BUS, 0x4b, 0x80 },
- { OV511_I2C_BUS, 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
- /*c1?*/ { OV511_I2C_BUS, 0x4e, 0x40 },
-
- /* UV average mode, color killer: strongest */
- { OV511_I2C_BUS, 0x4f, 0x07 },
-
- { OV511_I2C_BUS, 0x54, 0x23 }, /* Max AGC gain: 18dB */
- { OV511_I2C_BUS, 0x57, 0x81 }, /* (default) */
- { OV511_I2C_BUS, 0x59, 0x01 }, /* AGC dark current comp: +1 */
- { OV511_I2C_BUS, 0x5a, 0x2c }, /* (undocumented) */
- { OV511_I2C_BUS, 0x5b, 0x0f }, /* AWB chrominance levels */
-// { OV511_I2C_BUS, 0x5c, 0x10 },
- { OV511_DONE_BUS, 0x0, 0x00 }, /* END MARKER */
- };
-
- PDEBUG(4, "starting sensor configuration");
-
- if (init_ov_sensor(ov) < 0) {
- err("Failed to read sensor ID. You might not have an OV6xx0,");
- err("or it may be not responding. Report this to " EMAIL);
- return -1;
- } else {
- PDEBUG(1, "OV6xx0 sensor detected");
- }
-
- /* Detect sensor (sub)type */
- rc = i2c_r(ov, OV7610_REG_COM_I);
-
- if (rc < 0) {
- err("Error detecting sensor type");
- return -1;
- }
-
- if ((rc & 3) == 0) {
- ov->sensor = SEN_OV6630;
- dev_info(&ov->dev->dev, "Sensor is an OV6630\n");
- } else if ((rc & 3) == 1) {
- ov->sensor = SEN_OV6620;
- dev_info(&ov->dev->dev, "Sensor is an OV6620\n");
- } else if ((rc & 3) == 2) {
- ov->sensor = SEN_OV6630;
- dev_info(&ov->dev->dev, "Sensor is an OV6630AE\n");
- } else if ((rc & 3) == 3) {
- ov->sensor = SEN_OV6630;
- dev_info(&ov->dev->dev, "Sensor is an OV6630AF\n");
- }
-
- /* Set sensor-specific vars */
- ov->maxwidth = 352;
- ov->maxheight = 288;
- ov->minwidth = 64;
- ov->minheight = 48;
-
- // FIXME: These do not match the actual settings yet
- ov->brightness = 0x80 << 8;
- ov->contrast = 0x80 << 8;
- ov->colour = 0x80 << 8;
- ov->hue = 0x80 << 8;
-
- if (ov->sensor == SEN_OV6620) {
- PDEBUG(4, "Writing 6x20 registers");
- if (write_regvals(ov, aRegvalsNorm6x20))
- return -1;
- } else {
- PDEBUG(4, "Writing 6x30 registers");
- if (write_regvals(ov, aRegvalsNorm6x30))
- return -1;
- }
-
- return 0;
-}
-
-/* This initializes the KS0127 and KS0127B video decoders. */
-static int
-ks0127_configure(struct usb_ov511 *ov)
-{
- int rc;
-
-// FIXME: I don't know how to sync or reset it yet
-#if 0
- if (ov51x_init_ks_sensor(ov) < 0) {
- err("Failed to initialize the KS0127");
- return -1;
- } else {
- PDEBUG(1, "KS012x(B) sensor detected");
- }
-#endif
-
- /* Detect decoder subtype */
- rc = i2c_r(ov, 0x00);
- if (rc < 0) {
- err("Error detecting sensor type");
- return -1;
- } else if (rc & 0x08) {
- rc = i2c_r(ov, 0x3d);
- if (rc < 0) {
- err("Error detecting sensor type");
- return -1;
- } else if ((rc & 0x0f) == 0) {
- dev_info(&ov->dev->dev, "Sensor is a KS0127\n");
- ov->sensor = SEN_KS0127;
- } else if ((rc & 0x0f) == 9) {
- dev_info(&ov->dev->dev, "Sensor is a KS0127B Rev. A\n");
- ov->sensor = SEN_KS0127B;
- }
- } else {
- err("Error: Sensor is an unsupported KS0122");
- return -1;
- }
-
- /* Set sensor-specific vars */
- ov->maxwidth = 640;
- ov->maxheight = 480;
- ov->minwidth = 64;
- ov->minheight = 48;
-
- // FIXME: These do not match the actual settings yet
- ov->brightness = 0x80 << 8;
- ov->contrast = 0x80 << 8;
- ov->colour = 0x80 << 8;
- ov->hue = 0x80 << 8;
-
- /* This device is not supported yet. Bail out now... */
- err("This sensor is not supported yet.");
- return -1;
-
- return 0;
-}
-
-/* This initializes the SAA7111A video decoder. */
-static int
-saa7111a_configure(struct usb_ov511 *ov)
-{
- int rc;
-
- /* Since there is no register reset command, all registers must be
- * written, otherwise gives erratic results */
- static struct ov511_regvals aRegvalsNormSAA7111A[] = {
- { OV511_I2C_BUS, 0x06, 0xce },
- { OV511_I2C_BUS, 0x07, 0x00 },
- { OV511_I2C_BUS, 0x10, 0x44 }, /* YUV422, 240/286 lines */
- { OV511_I2C_BUS, 0x0e, 0x01 }, /* NTSC M or PAL BGHI */
- { OV511_I2C_BUS, 0x00, 0x00 },
- { OV511_I2C_BUS, 0x01, 0x00 },
- { OV511_I2C_BUS, 0x03, 0x23 },
- { OV511_I2C_BUS, 0x04, 0x00 },
- { OV511_I2C_BUS, 0x05, 0x00 },
- { OV511_I2C_BUS, 0x08, 0xc8 }, /* Auto field freq */
- { OV511_I2C_BUS, 0x09, 0x01 }, /* Chrom. trap off, APER=0.25 */
- { OV511_I2C_BUS, 0x0a, 0x80 }, /* BRIG=128 */
- { OV511_I2C_BUS, 0x0b, 0x40 }, /* CONT=1.0 */
- { OV511_I2C_BUS, 0x0c, 0x40 }, /* SATN=1.0 */
- { OV511_I2C_BUS, 0x0d, 0x00 }, /* HUE=0 */
- { OV511_I2C_BUS, 0x0f, 0x00 },
- { OV511_I2C_BUS, 0x11, 0x0c },
- { OV511_I2C_BUS, 0x12, 0x00 },
- { OV511_I2C_BUS, 0x13, 0x00 },
- { OV511_I2C_BUS, 0x14, 0x00 },
- { OV511_I2C_BUS, 0x15, 0x00 },
- { OV511_I2C_BUS, 0x16, 0x00 },
- { OV511_I2C_BUS, 0x17, 0x00 },
- { OV511_I2C_BUS, 0x02, 0xc0 }, /* Composite input 0 */
- { OV511_DONE_BUS, 0x0, 0x00 },
- };
-
-// FIXME: I don't know how to sync or reset it yet
-#if 0
- if (ov51x_init_saa_sensor(ov) < 0) {
- err("Failed to initialize the SAA7111A");
- return -1;
- } else {
- PDEBUG(1, "SAA7111A sensor detected");
- }
-#endif
-
- /* 640x480 not supported with PAL */
- if (ov->pal) {
- ov->maxwidth = 320;
- ov->maxheight = 240; /* Even field only */
- } else {
- ov->maxwidth = 640;
- ov->maxheight = 480; /* Even/Odd fields */
- }
-
- ov->minwidth = 320;
- ov->minheight = 240; /* Even field only */
-
- ov->has_decoder = 1;
- ov->num_inputs = 8;
- ov->norm = VIDEO_MODE_AUTO;
- ov->stop_during_set = 0; /* Decoder guarantees stable image */
-
- /* Decoder doesn't change these values, so we use these instead of
- * acutally reading the registers (which doesn't work) */
- ov->brightness = 0x80 << 8;
- ov->contrast = 0x40 << 9;
- ov->colour = 0x40 << 9;
- ov->hue = 32768;
-
- PDEBUG(4, "Writing SAA7111A registers");
- if (write_regvals(ov, aRegvalsNormSAA7111A))
- return -1;
-
- /* Detect version of decoder. This must be done after writing the
- * initial regs or the decoder will lock up. */
- rc = i2c_r(ov, 0x00);
-
- if (rc < 0) {
- err("Error detecting sensor version");
- return -1;
- } else {
- dev_info(&ov->dev->dev,
- "Sensor is an SAA7111A (version 0x%x)\n", rc);
- ov->sensor = SEN_SAA7111A;
- }
-
- // FIXME: Fix this for OV518(+)
- /* Latch to negative edge of clock. Otherwise, we get incorrect
- * colors and jitter in the digital signal. */
- if (ov->bclass == BCL_OV511)
- reg_w(ov, 0x11, 0x00);
- else
- dev_warn(&ov->dev->dev,
- "SAA7111A not yet supported with OV518/OV518+\n");
-
- return 0;
-}
-
-/* This initializes the OV511/OV511+ and the sensor */
-static int
-ov511_configure(struct usb_ov511 *ov)
-{
- static struct ov511_regvals aRegvalsInit511[] = {
- { OV511_REG_BUS, R51x_SYS_RESET, 0x7f },
- { OV511_REG_BUS, R51x_SYS_INIT, 0x01 },
- { OV511_REG_BUS, R51x_SYS_RESET, 0x7f },
- { OV511_REG_BUS, R51x_SYS_INIT, 0x01 },
- { OV511_REG_BUS, R51x_SYS_RESET, 0x3f },
- { OV511_REG_BUS, R51x_SYS_INIT, 0x01 },
- { OV511_REG_BUS, R51x_SYS_RESET, 0x3d },
- { OV511_DONE_BUS, 0x0, 0x00},
- };
-
- static struct ov511_regvals aRegvalsNorm511[] = {
- { OV511_REG_BUS, R511_DRAM_FLOW_CTL, 0x01 },
- { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 },
- { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 },
- { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 },
- { OV511_REG_BUS, R511_FIFO_OPTS, 0x1f },
- { OV511_REG_BUS, R511_COMP_EN, 0x00 },
- { OV511_REG_BUS, R511_COMP_LUT_EN, 0x03 },
- { OV511_DONE_BUS, 0x0, 0x00 },
- };
-
- static struct ov511_regvals aRegvalsNorm511Plus[] = {
- { OV511_REG_BUS, R511_DRAM_FLOW_CTL, 0xff },
- { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 },
- { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 },
- { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 },
- { OV511_REG_BUS, R511_FIFO_OPTS, 0xff },
- { OV511_REG_BUS, R511_COMP_EN, 0x00 },
- { OV511_REG_BUS, R511_COMP_LUT_EN, 0x03 },
- { OV511_DONE_BUS, 0x0, 0x00 },
- };
-
- PDEBUG(4, "");
-
- ov->customid = reg_r(ov, R511_SYS_CUST_ID);
- if (ov->customid < 0) {
- err("Unable to read camera bridge registers");
- goto error;
- }
-
- PDEBUG (1, "CustomID = %d", ov->customid);
- ov->desc = symbolic(camlist, ov->customid);
- dev_info(&ov->dev->dev, "model: %s\n", ov->desc);
-
- if (0 == strcmp(ov->desc, NOT_DEFINED_STR)) {
- err("Camera type (%d) not recognized", ov->customid);
- err("Please notify " EMAIL " of the name,");
- err("manufacturer, model, and this number of your camera.");
- err("Also include the output of the detection process.");
- }
-
- if (ov->customid == 70) /* USB Life TV (PAL/SECAM) */
- ov->pal = 1;
-
- if (write_regvals(ov, aRegvalsInit511))
- goto error;
-
- if (ov->led_policy == LED_OFF || ov->led_policy == LED_AUTO)
- ov51x_led_control(ov, 0);
-
- /* The OV511+ has undocumented bits in the flow control register.
- * Setting it to 0xff fixes the corruption with moving objects. */
- if (ov->bridge == BRG_OV511) {
- if (write_regvals(ov, aRegvalsNorm511))
- goto error;
- } else if (ov->bridge == BRG_OV511PLUS) {
- if (write_regvals(ov, aRegvalsNorm511Plus))
- goto error;
- } else {
- err("Invalid bridge");
- }
-
- if (ov511_init_compression(ov))
- goto error;
-
- ov->packet_numbering = 1;
- ov511_set_packet_size(ov, 0);
-
- ov->snap_enabled = snapshot;
-
- /* Test for 7xx0 */
- PDEBUG(3, "Testing for 0V7xx0");
- ov->primary_i2c_slave = OV7xx0_SID;
- if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0)
- goto error;
-
- if (i2c_w(ov, 0x12, 0x80) < 0) {
- /* Test for 6xx0 */
- PDEBUG(3, "Testing for 0V6xx0");
- ov->primary_i2c_slave = OV6xx0_SID;
- if (ov51x_set_slave_ids(ov, OV6xx0_SID) < 0)
- goto error;
-
- if (i2c_w(ov, 0x12, 0x80) < 0) {
- /* Test for 8xx0 */
- PDEBUG(3, "Testing for 0V8xx0");
- ov->primary_i2c_slave = OV8xx0_SID;
- if (ov51x_set_slave_ids(ov, OV8xx0_SID) < 0)
- goto error;
-
- if (i2c_w(ov, 0x12, 0x80) < 0) {
- /* Test for SAA7111A */
- PDEBUG(3, "Testing for SAA7111A");
- ov->primary_i2c_slave = SAA7111A_SID;
- if (ov51x_set_slave_ids(ov, SAA7111A_SID) < 0)
- goto error;
-
- if (i2c_w(ov, 0x0d, 0x00) < 0) {
- /* Test for KS0127 */
- PDEBUG(3, "Testing for KS0127");
- ov->primary_i2c_slave = KS0127_SID;
- if (ov51x_set_slave_ids(ov, KS0127_SID) < 0)
- goto error;
-
- if (i2c_w(ov, 0x10, 0x00) < 0) {
- err("Can't determine sensor slave IDs");
- goto error;
- } else {
- if (ks0127_configure(ov) < 0) {
- err("Failed to configure KS0127");
- goto error;
- }
- }
- } else {
- if (saa7111a_configure(ov) < 0) {
- err("Failed to configure SAA7111A");
- goto error;
- }
- }
- } else {
- err("Detected unsupported OV8xx0 sensor");
- goto error;
- }
- } else {
- if (ov6xx0_configure(ov) < 0) {
- err("Failed to configure OV6xx0");
- goto error;
- }
- }
- } else {
- if (ov7xx0_configure(ov) < 0) {
- err("Failed to configure OV7xx0");
- goto error;
- }
- }
-
- return 0;
-
-error:
- err("OV511 Config failed");
-
- return -EBUSY;
-}
-
-/* This initializes the OV518/OV518+ and the sensor */
-static int
-ov518_configure(struct usb_ov511 *ov)
-{
- /* For 518 and 518+ */
- static struct ov511_regvals aRegvalsInit518[] = {
- { OV511_REG_BUS, R51x_SYS_RESET, 0x40 },
- { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 },
- { OV511_REG_BUS, R51x_SYS_RESET, 0x3e },
- { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 },
- { OV511_REG_BUS, R51x_SYS_RESET, 0x00 },
- { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 },
- { OV511_REG_BUS, 0x46, 0x00 },
- { OV511_REG_BUS, 0x5d, 0x03 },
- { OV511_DONE_BUS, 0x0, 0x00},
- };
-
- static struct ov511_regvals aRegvalsNorm518[] = {
- { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, /* Reset */
- { OV511_REG_BUS, R51x_SYS_SNAP, 0x01 }, /* Enable */
- { OV511_REG_BUS, 0x31, 0x0f },
- { OV511_REG_BUS, 0x5d, 0x03 },
- { OV511_REG_BUS, 0x24, 0x9f },
- { OV511_REG_BUS, 0x25, 0x90 },
- { OV511_REG_BUS, 0x20, 0x00 },
- { OV511_REG_BUS, 0x51, 0x04 },
- { OV511_REG_BUS, 0x71, 0x19 },
- { OV511_DONE_BUS, 0x0, 0x00 },
- };
-
- static struct ov511_regvals aRegvalsNorm518Plus[] = {
- { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, /* Reset */
- { OV511_REG_BUS, R51x_SYS_SNAP, 0x01 }, /* Enable */
- { OV511_REG_BUS, 0x31, 0x0f },
- { OV511_REG_BUS, 0x5d, 0x03 },
- { OV511_REG_BUS, 0x24, 0x9f },
- { OV511_REG_BUS, 0x25, 0x90 },
- { OV511_REG_BUS, 0x20, 0x60 },
- { OV511_REG_BUS, 0x51, 0x02 },
- { OV511_REG_BUS, 0x71, 0x19 },
- { OV511_REG_BUS, 0x40, 0xff },
- { OV511_REG_BUS, 0x41, 0x42 },
- { OV511_REG_BUS, 0x46, 0x00 },
- { OV511_REG_BUS, 0x33, 0x04 },
- { OV511_REG_BUS, 0x21, 0x19 },
- { OV511_REG_BUS, 0x3f, 0x10 },
- { OV511_DONE_BUS, 0x0, 0x00 },
- };
-
- PDEBUG(4, "");
-
- /* First 5 bits of custom ID reg are a revision ID on OV518 */
- dev_info(&ov->dev->dev, "Device revision %d\n",
- 0x1F & reg_r(ov, R511_SYS_CUST_ID));
-
- /* Give it the default description */
- ov->desc = symbolic(camlist, 0);
-
- if (write_regvals(ov, aRegvalsInit518))
- goto error;
-
- /* Set LED GPIO pin to output mode */
- if (reg_w_mask(ov, 0x57, 0x00, 0x02) < 0)
- goto error;
-
- /* LED is off by default with OV518; have to explicitly turn it on */
- if (ov->led_policy == LED_OFF || ov->led_policy == LED_AUTO)
- ov51x_led_control(ov, 0);
- else
- ov51x_led_control(ov, 1);
-
- /* Don't require compression if dumppix is enabled; otherwise it's
- * required. OV518 has no uncompressed mode, to save RAM. */
- if (!dumppix && !ov->compress) {
- ov->compress = 1;
- dev_warn(&ov->dev->dev,
- "Compression required with OV518...enabling\n");
- }
-
- if (ov->bridge == BRG_OV518) {
- if (write_regvals(ov, aRegvalsNorm518))
- goto error;
- } else if (ov->bridge == BRG_OV518PLUS) {
- if (write_regvals(ov, aRegvalsNorm518Plus))
- goto error;
- } else {
- err("Invalid bridge");
- }
-
- if (reg_w(ov, 0x2f, 0x80) < 0)
- goto error;
-
- if (ov518_init_compression(ov))
- goto error;
-
- if (ov->bridge == BRG_OV518)
- {
- struct usb_interface *ifp;
- struct usb_host_interface *alt;
- __u16 mxps = 0;
-
- ifp = usb_ifnum_to_if(ov->dev, 0);
- if (ifp) {
- alt = usb_altnum_to_altsetting(ifp, 7);
- if (alt)
- mxps = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
- }
-
- /* Some OV518s have packet numbering by default, some don't */
- if (mxps == 897)
- ov->packet_numbering = 1;
- else
- ov->packet_numbering = 0;
- } else {
- /* OV518+ has packet numbering turned on by default */
- ov->packet_numbering = 1;
- }
-
- ov518_set_packet_size(ov, 0);
-
- ov->snap_enabled = snapshot;
-
- /* Test for 76xx */
- ov->primary_i2c_slave = OV7xx0_SID;
- if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0)
- goto error;
-
- /* The OV518 must be more aggressive about sensor detection since
- * I2C write will never fail if the sensor is not present. We have
- * to try to initialize the sensor to detect its presence */
-
- if (init_ov_sensor(ov) < 0) {
- /* Test for 6xx0 */
- ov->primary_i2c_slave = OV6xx0_SID;
- if (ov51x_set_slave_ids(ov, OV6xx0_SID) < 0)
- goto error;
-
- if (init_ov_sensor(ov) < 0) {
- /* Test for 8xx0 */
- ov->primary_i2c_slave = OV8xx0_SID;
- if (ov51x_set_slave_ids(ov, OV8xx0_SID) < 0)
- goto error;
-
- if (init_ov_sensor(ov) < 0) {
- err("Can't determine sensor slave IDs");
- goto error;
- } else {
- err("Detected unsupported OV8xx0 sensor");
- goto error;
- }
- } else {
- if (ov6xx0_configure(ov) < 0) {
- err("Failed to configure OV6xx0");
- goto error;
- }
- }
- } else {
- if (ov7xx0_configure(ov) < 0) {
- err("Failed to configure OV7xx0");
- goto error;
- }
- }
-
- ov->maxwidth = 352;
- ov->maxheight = 288;
-
- // The OV518 cannot go as low as the sensor can
- ov->minwidth = 160;
- ov->minheight = 120;
-
- return 0;
-
-error:
- err("OV518 Config failed");
-
- return -EBUSY;
-}
-
-/****************************************************************************
- * sysfs
- ***************************************************************************/
-
-static inline struct usb_ov511 *cd_to_ov(struct device *cd)
-{
- struct video_device *vdev = to_video_device(cd);
- return video_get_drvdata(vdev);
-}
-
-static ssize_t show_custom_id(struct device *cd,
- struct device_attribute *attr, char *buf)
-{
- struct usb_ov511 *ov = cd_to_ov(cd);
- return sprintf(buf, "%d\n", ov->customid);
-}
-static DEVICE_ATTR(custom_id, S_IRUGO, show_custom_id, NULL);
-
-static ssize_t show_model(struct device *cd,
- struct device_attribute *attr, char *buf)
-{
- struct usb_ov511 *ov = cd_to_ov(cd);
- return sprintf(buf, "%s\n", ov->desc);
-}
-static DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
-
-static ssize_t show_bridge(struct device *cd,
- struct device_attribute *attr, char *buf)
-{
- struct usb_ov511 *ov = cd_to_ov(cd);
- return sprintf(buf, "%s\n", symbolic(brglist, ov->bridge));
-}
-static DEVICE_ATTR(bridge, S_IRUGO, show_bridge, NULL);
-
-static ssize_t show_sensor(struct device *cd,
- struct device_attribute *attr, char *buf)
-{
- struct usb_ov511 *ov = cd_to_ov(cd);
- return sprintf(buf, "%s\n", symbolic(senlist, ov->sensor));
-}
-static DEVICE_ATTR(sensor, S_IRUGO, show_sensor, NULL);
-
-static ssize_t show_brightness(struct device *cd,
- struct device_attribute *attr, char *buf)
-{
- struct usb_ov511 *ov = cd_to_ov(cd);
- unsigned short x;
-
- if (!ov->dev)
- return -ENODEV;
- sensor_get_brightness(ov, &x);
- return sprintf(buf, "%d\n", x >> 8);
-}
-static DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL);
-
-static ssize_t show_saturation(struct device *cd,
- struct device_attribute *attr, char *buf)
-{
- struct usb_ov511 *ov = cd_to_ov(cd);
- unsigned short x;
-
- if (!ov->dev)
- return -ENODEV;
- sensor_get_saturation(ov, &x);
- return sprintf(buf, "%d\n", x >> 8);
-}
-static DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL);
-
-static ssize_t show_contrast(struct device *cd,
- struct device_attribute *attr, char *buf)
-{
- struct usb_ov511 *ov = cd_to_ov(cd);
- unsigned short x;
-
- if (!ov->dev)
- return -ENODEV;
- sensor_get_contrast(ov, &x);
- return sprintf(buf, "%d\n", x >> 8);
-}
-static DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL);
-
-static ssize_t show_hue(struct device *cd,
- struct device_attribute *attr, char *buf)
-{
- struct usb_ov511 *ov = cd_to_ov(cd);
- unsigned short x;
-
- if (!ov->dev)
- return -ENODEV;
- sensor_get_hue(ov, &x);
- return sprintf(buf, "%d\n", x >> 8);
-}
-static DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
-
-static ssize_t show_exposure(struct device *cd,
- struct device_attribute *attr, char *buf)
-{
- struct usb_ov511 *ov = cd_to_ov(cd);
- unsigned char exp = 0;
-
- if (!ov->dev)
- return -ENODEV;
- sensor_get_exposure(ov, &exp);
- return sprintf(buf, "%d\n", exp);
-}
-static DEVICE_ATTR(exposure, S_IRUGO, show_exposure, NULL);
-
-static int ov_create_sysfs(struct video_device *vdev)
-{
- int rc;
-
- rc = device_create_file(&vdev->dev, &dev_attr_custom_id);
- if (rc) goto err;
- rc = device_create_file(&vdev->dev, &dev_attr_model);
- if (rc) goto err_id;
- rc = device_create_file(&vdev->dev, &dev_attr_bridge);
- if (rc) goto err_model;
- rc = device_create_file(&vdev->dev, &dev_attr_sensor);
- if (rc) goto err_bridge;
- rc = device_create_file(&vdev->dev, &dev_attr_brightness);
- if (rc) goto err_sensor;
- rc = device_create_file(&vdev->dev, &dev_attr_saturation);
- if (rc) goto err_bright;
- rc = device_create_file(&vdev->dev, &dev_attr_contrast);
- if (rc) goto err_sat;
- rc = device_create_file(&vdev->dev, &dev_attr_hue);
- if (rc) goto err_contrast;
- rc = device_create_file(&vdev->dev, &dev_attr_exposure);
- if (rc) goto err_hue;
-
- return 0;
-
-err_hue:
- device_remove_file(&vdev->dev, &dev_attr_hue);
-err_contrast:
- device_remove_file(&vdev->dev, &dev_attr_contrast);
-err_sat:
- device_remove_file(&vdev->dev, &dev_attr_saturation);
-err_bright:
- device_remove_file(&vdev->dev, &dev_attr_brightness);
-err_sensor:
- device_remove_file(&vdev->dev, &dev_attr_sensor);
-err_bridge:
- device_remove_file(&vdev->dev, &dev_attr_bridge);
-err_model:
- device_remove_file(&vdev->dev, &dev_attr_model);
-err_id:
- device_remove_file(&vdev->dev, &dev_attr_custom_id);
-err:
- return rc;
-}
-
-/****************************************************************************
- * USB routines
- ***************************************************************************/
-
-static int
-ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
- struct usb_device *dev = interface_to_usbdev(intf);
- struct usb_interface_descriptor *idesc;
- struct usb_ov511 *ov;
- int i, rc, nr;
-
- PDEBUG(1, "probing for device...");
-
- /* We don't handle multi-config cameras */
- if (dev->descriptor.bNumConfigurations != 1)
- return -ENODEV;
-
- idesc = &intf->cur_altsetting->desc;
-
- if (idesc->bInterfaceClass != 0xFF)
- return -ENODEV;
- if (idesc->bInterfaceSubClass != 0x00)
- return -ENODEV;
-
- if ((ov = kzalloc(sizeof(*ov), GFP_KERNEL)) == NULL) {
- err("couldn't kmalloc ov struct");
- goto error_out;
- }
-
- ov->dev = dev;
- ov->iface = idesc->bInterfaceNumber;
- ov->led_policy = led;
- ov->compress = compress;
- ov->lightfreq = lightfreq;
- ov->num_inputs = 1; /* Video decoder init functs. change this */
- ov->stop_during_set = !fastset;
- ov->backlight = backlight;
- ov->mirror = mirror;
- ov->auto_brt = autobright;
- ov->auto_gain = autogain;
- ov->auto_exp = autoexp;
-
- switch (le16_to_cpu(dev->descriptor.idProduct)) {
- case PROD_OV511:
- ov->bridge = BRG_OV511;
- ov->bclass = BCL_OV511;
- break;
- case PROD_OV511PLUS:
- ov->bridge = BRG_OV511PLUS;
- ov->bclass = BCL_OV511;
- break;
- case PROD_OV518:
- ov->bridge = BRG_OV518;
- ov->bclass = BCL_OV518;
- break;
- case PROD_OV518PLUS:
- ov->bridge = BRG_OV518PLUS;
- ov->bclass = BCL_OV518;
- break;
- case PROD_ME2CAM:
- if (le16_to_cpu(dev->descriptor.idVendor) != VEND_MATTEL)
- goto error;
- ov->bridge = BRG_OV511PLUS;
- ov->bclass = BCL_OV511;
- break;
- default:
- err("Unknown product ID 0x%04x", le16_to_cpu(dev->descriptor.idProduct));
- goto error;
- }
-
- dev_info(&intf->dev, "USB %s video device found\n",
- symbolic(brglist, ov->bridge));
-
- init_waitqueue_head(&ov->wq);
-
- mutex_init(&ov->lock); /* to 1 == available */
- mutex_init(&ov->buf_lock);
- mutex_init(&ov->i2c_lock);
- mutex_init(&ov->cbuf_lock);
-
- ov->buf_state = BUF_NOT_ALLOCATED;
-
- if (usb_make_path(dev, ov->usb_path, OV511_USB_PATH_LEN) < 0) {
- err("usb_make_path error");
- goto error;
- }
-
- /* Allocate control transfer buffer. */
- /* Must be kmalloc()'ed, for DMA compatibility */
- ov->cbuf = kmalloc(OV511_CBUF_SIZE, GFP_KERNEL);
- if (!ov->cbuf)
- goto error;
-
- if (ov->bclass == BCL_OV518) {
- if (ov518_configure(ov) < 0)
- goto error;
- } else {
- if (ov511_configure(ov) < 0)
- goto error;
- }
-
- for (i = 0; i < OV511_NUMFRAMES; i++) {
- ov->frame[i].framenum = i;
- init_waitqueue_head(&ov->frame[i].wq);
- }
-
- for (i = 0; i < OV511_NUMSBUF; i++) {
- ov->sbuf[i].ov = ov;
- spin_lock_init(&ov->sbuf[i].lock);
- ov->sbuf[i].n = i;
- }
-
- /* Unnecessary? (This is done on open(). Need to make sure variables
- * are properly initialized without this before removing it, though). */
- if (ov51x_set_default_params(ov) < 0)
- goto error;
-
-#ifdef OV511_DEBUG
- if (dump_bridge) {
- if (ov->bclass == BCL_OV511)
- ov511_dump_regs(ov);
- else
- ov518_dump_regs(ov);
- }
-#endif
-
- ov->vdev = video_device_alloc();
- if (!ov->vdev)
- goto error;
-
- memcpy(ov->vdev, &vdev_template, sizeof(*ov->vdev));
- ov->vdev->parent = &intf->dev;
- video_set_drvdata(ov->vdev, ov);
-
- mutex_lock(&ov->lock);
-
- /* Check to see next free device and mark as used */
- nr = find_first_zero_bit(&ov511_devused, OV511_MAX_UNIT_VIDEO);
-
- /* Registers device */
- if (unit_video[nr] != 0)
- rc = video_register_device(ov->vdev, VFL_TYPE_GRABBER,
- unit_video[nr]);
- else
- rc = video_register_device(ov->vdev, VFL_TYPE_GRABBER, -1);
-
- if (rc < 0) {
- err("video_register_device failed");
- mutex_unlock(&ov->lock);
- goto error;
- }
-
- /* Mark device as used */
- ov511_devused |= 1 << nr;
- ov->nr = nr;
-
- dev_info(&intf->dev, "Device at %s registered to %s\n",
- ov->usb_path, video_device_node_name(ov->vdev));
-
- usb_set_intfdata(intf, ov);
- if (ov_create_sysfs(ov->vdev)) {
- err("ov_create_sysfs failed");
- ov511_devused &= ~(1 << nr);
- mutex_unlock(&ov->lock);
- goto error;
- }
-
- mutex_unlock(&ov->lock);
-
- return 0;
-
-error:
- if (ov->vdev) {
- if (!video_is_registered(ov->vdev))
- video_device_release(ov->vdev);
- else
- video_unregister_device(ov->vdev);
- ov->vdev = NULL;
- }
-
- if (ov->cbuf) {
- mutex_lock(&ov->cbuf_lock);
- kfree(ov->cbuf);
- ov->cbuf = NULL;
- mutex_unlock(&ov->cbuf_lock);
- }
-
- kfree(ov);
- ov = NULL;
-
-error_out:
- err("Camera initialization failed");
- return -EIO;
-}
-
-static void
-ov51x_disconnect(struct usb_interface *intf)
-{
- struct usb_ov511 *ov = usb_get_intfdata(intf);
- int n;
-
- PDEBUG(3, "");
-
- mutex_lock(&ov->lock);
- usb_set_intfdata (intf, NULL);
-
- /* Free device number */
- ov511_devused &= ~(1 << ov->nr);
-
- if (ov->vdev)
- video_unregister_device(ov->vdev);
-
- for (n = 0; n < OV511_NUMFRAMES; n++)
- ov->frame[n].grabstate = FRAME_ERROR;
-
- ov->curframe = -1;
-
- /* This will cause the process to request another frame */
- for (n = 0; n < OV511_NUMFRAMES; n++)
- wake_up_interruptible(&ov->frame[n].wq);
-
- wake_up_interruptible(&ov->wq);
-
- ov->streaming = 0;
- ov51x_unlink_isoc(ov);
- mutex_unlock(&ov->lock);
-
- ov->dev = NULL;
-
- /* Free the memory */
- if (!ov->user) {
- mutex_lock(&ov->cbuf_lock);
- kfree(ov->cbuf);
- ov->cbuf = NULL;
- mutex_unlock(&ov->cbuf_lock);
-
- ov51x_dealloc(ov);
- kfree(ov);
- ov = NULL;
- }
-
- PDEBUG(3, "Disconnect complete");
-}
-
-static struct usb_driver ov511_driver = {
- .name = "ov511",
- .id_table = device_table,
- .probe = ov51x_probe,
- .disconnect = ov51x_disconnect
-};
-
-/****************************************************************************
- *
- * Module routines
- *
- ***************************************************************************/
-
-static int __init
-usb_ov511_init(void)
-{
- int retval;
-
- retval = usb_register(&ov511_driver);
- if (retval)
- goto out;
-
- printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
- DRIVER_DESC "\n");
-
-out:
- return retval;
-}
-
-static void __exit
-usb_ov511_exit(void)
-{
- usb_deregister(&ov511_driver);
- printk(KERN_INFO KBUILD_MODNAME ": driver deregistered\n");
-}
-
-module_init(usb_ov511_init);
-module_exit(usb_ov511_exit);
-
diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h
deleted file mode 100644
index c450c92..0000000
--- a/drivers/media/video/ov511.h
+++ /dev/null
@@ -1,573 +0,0 @@
-#ifndef __LINUX_OV511_H
-#define __LINUX_OV511_H
-
-#include <asm/uaccess.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/usb.h>
-#include <linux/mutex.h>
-
-#define OV511_DEBUG /* Turn on debug messages */
-
-#ifdef OV511_DEBUG
- #define PDEBUG(level, fmt, args...) \
- if (debug >= (level)) \
- printk(KERN_INFO KBUILD_MODNAME "[%s:%d] \n" fmt, \
- __func__, __LINE__ , ## args)
-#else
- #define PDEBUG(level, fmt, args...) do {} while(0)
-#endif
-
-/* This macro restricts an int variable to an inclusive range */
-#define RESTRICT_TO_RANGE(v,mi,ma) { \
- if ((v) < (mi)) (v) = (mi); \
- else if ((v) > (ma)) (v) = (ma); \
-}
-
-/* --------------------------------- */
-/* DEFINES FOR OV511 AND OTHER CHIPS */
-/* --------------------------------- */
-
-/* USB IDs */
-#define VEND_OMNIVISION 0x05A9
-#define PROD_OV511 0x0511
-#define PROD_OV511PLUS 0xA511
-#define PROD_OV518 0x0518
-#define PROD_OV518PLUS 0xA518
-
-#define VEND_MATTEL 0x0813
-#define PROD_ME2CAM 0x0002
-
-/* --------------------------------- */
-/* OV51x REGISTER MNEMONICS */
-/* --------------------------------- */
-
-/* Camera interface register numbers */
-#define R511_CAM_DELAY 0x10
-#define R511_CAM_EDGE 0x11
-#define R511_CAM_PXCNT 0x12
-#define R511_CAM_LNCNT 0x13
-#define R511_CAM_PXDIV 0x14
-#define R511_CAM_LNDIV 0x15
-#define R511_CAM_UV_EN 0x16
-#define R511_CAM_LINE_MODE 0x17
-#define R511_CAM_OPTS 0x18
-
-/* Snapshot mode camera interface register numbers */
-#define R511_SNAP_FRAME 0x19
-#define R511_SNAP_PXCNT 0x1A
-#define R511_SNAP_LNCNT 0x1B
-#define R511_SNAP_PXDIV 0x1C
-#define R511_SNAP_LNDIV 0x1D
-#define R511_SNAP_UV_EN 0x1E
-#define R511_SNAP_OPTS 0x1F
-
-/* DRAM register numbers */
-#define R511_DRAM_FLOW_CTL 0x20
-#define R511_DRAM_ARCP 0x21
-#define R511_DRAM_MRC 0x22
-#define R511_DRAM_RFC 0x23
-
-/* ISO FIFO register numbers */
-#define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */
-#define R511_FIFO_OPTS 0x31
-
-/* Parallel IO register numbers */
-#define R511_PIO_OPTS 0x38
-#define R511_PIO_DATA 0x39
-#define R511_PIO_BIST 0x3E
-#define R518_GPIO_IN 0x55 /* OV518(+) only */
-#define R518_GPIO_OUT 0x56 /* OV518(+) only */
-#define R518_GPIO_CTL 0x57 /* OV518(+) only */
-#define R518_GPIO_PULSE_IN 0x58 /* OV518(+) only */
-#define R518_GPIO_PULSE_CLEAR 0x59 /* OV518(+) only */
-#define R518_GPIO_PULSE_POL 0x5a /* OV518(+) only */
-#define R518_GPIO_PULSE_EN 0x5b /* OV518(+) only */
-#define R518_GPIO_RESET 0x5c /* OV518(+) only */
-
-/* I2C registers */
-#define R511_I2C_CTL 0x40
-#define R518_I2C_CTL 0x47 /* OV518(+) only */
-#define R51x_I2C_W_SID 0x41
-#define R51x_I2C_SADDR_3 0x42
-#define R51x_I2C_SADDR_2 0x43
-#define R51x_I2C_R_SID 0x44
-#define R51x_I2C_DATA 0x45
-#define R51x_I2C_CLOCK 0x46
-#define R51x_I2C_TIMEOUT 0x47
-
-/* I2C snapshot registers */
-#define R511_SI2C_SADDR_3 0x48
-#define R511_SI2C_DATA 0x49
-
-/* System control registers */
-#define R51x_SYS_RESET 0x50
- /* Reset type definitions */
-#define OV511_RESET_UDC 0x01
-#define OV511_RESET_I2C 0x02
-#define OV511_RESET_FIFO 0x04
-#define OV511_RESET_OMNICE 0x08
-#define OV511_RESET_DRAM 0x10
-#define OV511_RESET_CAM_INT 0x20
-#define OV511_RESET_OV511 0x40
-#define OV511_RESET_NOREGS 0x3F /* All but OV511 & regs */
-#define OV511_RESET_ALL 0x7F
-
-#define R511_SYS_CLOCK_DIV 0x51
-#define R51x_SYS_SNAP 0x52
-#define R51x_SYS_INIT 0x53
-#define R511_SYS_PWR_CLK 0x54 /* OV511+/OV518(+) only */
-#define R511_SYS_LED_CTL 0x55 /* OV511+ only */
-#define R511_SYS_USER 0x5E
-#define R511_SYS_CUST_ID 0x5F
-
-/* OmniCE (compression) registers */
-#define R511_COMP_PHY 0x70
-#define R511_COMP_PHUV 0x71
-#define R511_COMP_PVY 0x72
-#define R511_COMP_PVUV 0x73
-#define R511_COMP_QHY 0x74
-#define R511_COMP_QHUV 0x75
-#define R511_COMP_QVY 0x76
-#define R511_COMP_QVUV 0x77
-#define R511_COMP_EN 0x78
-#define R511_COMP_LUT_EN 0x79
-#define R511_COMP_LUT_BEGIN 0x80
-
-/* --------------------------------- */
-/* ALTERNATE NUMBERS */
-/* --------------------------------- */
-
-/* Alternate numbers for various max packet sizes (OV511 only) */
-#define OV511_ALT_SIZE_992 0
-#define OV511_ALT_SIZE_993 1
-#define OV511_ALT_SIZE_768 2
-#define OV511_ALT_SIZE_769 3
-#define OV511_ALT_SIZE_512 4
-#define OV511_ALT_SIZE_513 5
-#define OV511_ALT_SIZE_257 6
-#define OV511_ALT_SIZE_0 7
-
-/* Alternate numbers for various max packet sizes (OV511+ only) */
-#define OV511PLUS_ALT_SIZE_0 0
-#define OV511PLUS_ALT_SIZE_33 1
-#define OV511PLUS_ALT_SIZE_129 2
-#define OV511PLUS_ALT_SIZE_257 3
-#define OV511PLUS_ALT_SIZE_385 4
-#define OV511PLUS_ALT_SIZE_513 5
-#define OV511PLUS_ALT_SIZE_769 6
-#define OV511PLUS_ALT_SIZE_961 7
-
-/* Alternate numbers for various max packet sizes (OV518(+) only) */
-#define OV518_ALT_SIZE_0 0
-#define OV518_ALT_SIZE_128 1
-#define OV518_ALT_SIZE_256 2
-#define OV518_ALT_SIZE_384 3
-#define OV518_ALT_SIZE_512 4
-#define OV518_ALT_SIZE_640 5
-#define OV518_ALT_SIZE_768 6
-#define OV518_ALT_SIZE_896 7
-
-/* --------------------------------- */
-/* OV7610 REGISTER MNEMONICS */
-/* --------------------------------- */
-
-/* OV7610 registers */
-#define OV7610_REG_GAIN 0x00 /* gain setting (5:0) */
-#define OV7610_REG_BLUE 0x01 /* blue channel balance */
-#define OV7610_REG_RED 0x02 /* red channel balance */
-#define OV7610_REG_SAT 0x03 /* saturation */
- /* 04 reserved */
-#define OV7610_REG_CNT 0x05 /* Y contrast */
-#define OV7610_REG_BRT 0x06 /* Y brightness */
- /* 08-0b reserved */
-#define OV7610_REG_BLUE_BIAS 0x0C /* blue channel bias (5:0) */
-#define OV7610_REG_RED_BIAS 0x0D /* read channel bias (5:0) */
-#define OV7610_REG_GAMMA_COEFF 0x0E /* gamma settings */
-#define OV7610_REG_WB_RANGE 0x0F /* AEC/ALC/S-AWB settings */
-#define OV7610_REG_EXP 0x10 /* manual exposure setting */
-#define OV7610_REG_CLOCK 0x11 /* polarity/clock prescaler */
-#define OV7610_REG_COM_A 0x12 /* misc common regs */
-#define OV7610_REG_COM_B 0x13 /* misc common regs */
-#define OV7610_REG_COM_C 0x14 /* misc common regs */
-#define OV7610_REG_COM_D 0x15 /* misc common regs */
-#define OV7610_REG_FIELD_DIVIDE 0x16 /* field interval/mode settings */
-#define OV7610_REG_HWIN_START 0x17 /* horizontal window start */
-#define OV7610_REG_HWIN_END 0x18 /* horizontal window end */
-#define OV7610_REG_VWIN_START 0x19 /* vertical window start */
-#define OV7610_REG_VWIN_END 0x1A /* vertical window end */
-#define OV7610_REG_PIXEL_SHIFT 0x1B /* pixel shift */
-#define OV7610_REG_ID_HIGH 0x1C /* manufacturer ID MSB */
-#define OV7610_REG_ID_LOW 0x1D /* manufacturer ID LSB */
- /* 0e-0f reserved */
-#define OV7610_REG_COM_E 0x20 /* misc common regs */
-#define OV7610_REG_YOFFSET 0x21 /* Y channel offset */
-#define OV7610_REG_UOFFSET 0x22 /* U channel offset */
- /* 23 reserved */
-#define OV7610_REG_ECW 0x24 /* Exposure white level for AEC */
-#define OV7610_REG_ECB 0x25 /* Exposure black level for AEC */
-#define OV7610_REG_COM_F 0x26 /* misc settings */
-#define OV7610_REG_COM_G 0x27 /* misc settings */
-#define OV7610_REG_COM_H 0x28 /* misc settings */
-#define OV7610_REG_COM_I 0x29 /* misc settings */
-#define OV7610_REG_FRAMERATE_H 0x2A /* frame rate MSB + misc */
-#define OV7610_REG_FRAMERATE_L 0x2B /* frame rate LSB */
-#define OV7610_REG_ALC 0x2C /* Auto Level Control settings */
-#define OV7610_REG_COM_J 0x2D /* misc settings */
-#define OV7610_REG_VOFFSET 0x2E /* V channel offset adjustment */
-#define OV7610_REG_ARRAY_BIAS 0x2F /* Array bias -- don't change */
- /* 30-32 reserved */
-#define OV7610_REG_YGAMMA 0x33 /* misc gamma settings (7:6) */
-#define OV7610_REG_BIAS_ADJUST 0x34 /* misc bias settings */
-#define OV7610_REG_COM_L 0x35 /* misc settings */
- /* 36-37 reserved */
-#define OV7610_REG_COM_K 0x38 /* misc registers */
-
-/* --------------------------------- */
-/* I2C ADDRESSES */
-/* --------------------------------- */
-
-#define OV7xx0_SID 0x42
-#define OV6xx0_SID 0xC0
-#define OV8xx0_SID 0xA0
-#define KS0127_SID 0xD8
-#define SAA7111A_SID 0x48
-
-/* --------------------------------- */
-/* MISCELLANEOUS DEFINES */
-/* --------------------------------- */
-
-#define I2C_CLOCK_PRESCALER 0x03
-
-#define FRAMES_PER_DESC 10 /* FIXME - What should this be? */
-#define MAX_FRAME_SIZE_PER_DESC 993 /* For statically allocated stuff */
-#define PIXELS_PER_SEG 256 /* Pixels per segment */
-
-#define OV511_ENDPOINT_ADDRESS 1 /* Isoc endpoint number */
-
-#define OV511_NUMFRAMES 2
-#if OV511_NUMFRAMES > VIDEO_MAX_FRAME
- #error "OV511_NUMFRAMES is too high"
-#endif
-
-#define OV511_NUMSBUF 2
-
-/* Control transfers use up to 4 bytes */
-#define OV511_CBUF_SIZE 4
-
-/* Size of usb_make_path() buffer */
-#define OV511_USB_PATH_LEN 64
-
-/* Bridge types */
-enum {
- BRG_UNKNOWN,
- BRG_OV511,
- BRG_OV511PLUS,
- BRG_OV518,
- BRG_OV518PLUS,
-};
-
-/* Bridge classes */
-enum {
- BCL_UNKNOWN,
- BCL_OV511,
- BCL_OV518,
-};
-
-/* Sensor types */
-enum {
- SEN_UNKNOWN,
- SEN_OV76BE,
- SEN_OV7610,
- SEN_OV7620,
- SEN_OV7620AE,
- SEN_OV6620,
- SEN_OV6630,
- SEN_OV6630AE,
- SEN_OV6630AF,
- SEN_OV8600,
- SEN_KS0127,
- SEN_KS0127B,
- SEN_SAA7111A,
-};
-
-enum {
- STATE_SCANNING, /* Scanning for start */
- STATE_HEADER, /* Parsing header */
- STATE_LINES, /* Parsing lines */
-};
-
-/* Buffer states */
-enum {
- BUF_NOT_ALLOCATED,
- BUF_ALLOCATED,
-};
-
-/* --------- Definition of ioctl interface --------- */
-
-#define OV511_INTERFACE_VER 101
-
-/* LED options */
-enum {
- LED_OFF,
- LED_ON,
- LED_AUTO,
-};
-
-/* Raw frame formats */
-enum {
- RAWFMT_INVALID,
- RAWFMT_YUV400,
- RAWFMT_YUV420,
- RAWFMT_YUV422,
- RAWFMT_GBR422,
-};
-
-struct ov511_i2c_struct {
- unsigned char slave; /* Write slave ID (read ID - 1) */
- unsigned char reg; /* Index of register */
- unsigned char value; /* User sets this w/ write, driver does w/ read */
- unsigned char mask; /* Bits to be changed. Not used with read ops */
-};
-
-/* ioctls */
-#define OV511IOC_WI2C _IOW('v', BASE_VIDIOCPRIVATE + 5, \
- struct ov511_i2c_struct)
-#define OV511IOC_RI2C _IOWR('v', BASE_VIDIOCPRIVATE + 6, \
- struct ov511_i2c_struct)
-/* ------------- End IOCTL interface -------------- */
-
-struct usb_ov511; /* Forward declaration */
-
-struct ov511_sbuf {
- struct usb_ov511 *ov;
- unsigned char *data;
- struct urb *urb;
- spinlock_t lock;
- int n;
-};
-
-enum {
- FRAME_UNUSED, /* Unused (no MCAPTURE) */
- FRAME_READY, /* Ready to start grabbing */
- FRAME_GRABBING, /* In the process of being grabbed into */
- FRAME_DONE, /* Finished grabbing, but not been synced yet */
- FRAME_ERROR, /* Something bad happened while processing */
-};
-
-struct ov511_regvals {
- enum {
- OV511_DONE_BUS,
- OV511_REG_BUS,
- OV511_I2C_BUS,
- } bus;
- unsigned char reg;
- unsigned char val;
-};
-
-struct ov511_frame {
- int framenum; /* Index of this frame */
- unsigned char *data; /* Frame buffer */
- unsigned char *tempdata; /* Temp buffer for multi-stage conversions */
- unsigned char *rawdata; /* Raw camera data buffer */
- unsigned char *compbuf; /* Temp buffer for decompressor */
-
- int depth; /* Bytes per pixel */
- int width; /* Width application is expecting */
- int height; /* Height application is expecting */
-
- int rawwidth; /* Actual width of frame sent from camera */
- int rawheight; /* Actual height of frame sent from camera */
-
- int sub_flag; /* Sub-capture mode for this frame? */
- unsigned int format; /* Format for this frame */
- int compressed; /* Is frame compressed? */
-
- volatile int grabstate; /* State of grabbing */
- int scanstate; /* State of scanning */
-
- int bytes_recvd; /* Number of image bytes received from camera */
-
- long bytes_read; /* Amount that has been read() */
-
- wait_queue_head_t wq; /* Processes waiting */
-
- int snapshot; /* True if frame was a snapshot */
-};
-
-#define DECOMP_INTERFACE_VER 4
-
-/* Compression module operations */
-struct ov51x_decomp_ops {
- int (*decomp_400)(unsigned char *, unsigned char *, unsigned char *,
- int, int, int);
- int (*decomp_420)(unsigned char *, unsigned char *, unsigned char *,
- int, int, int);
- int (*decomp_422)(unsigned char *, unsigned char *, unsigned char *,
- int, int, int);
- struct module *owner;
-};
-
-struct usb_ov511 {
- struct video_device *vdev;
- struct usb_device *dev;
-
- int customid;
- char *desc;
- unsigned char iface;
- char usb_path[OV511_USB_PATH_LEN];
-
- /* Determined by sensor type */
- int maxwidth;
- int maxheight;
- int minwidth;
- int minheight;
-
- int brightness;
- int colour;
- int contrast;
- int hue;
- int whiteness;
- int exposure;
- int auto_brt; /* Auto brightness enabled flag */
- int auto_gain; /* Auto gain control enabled flag */
- int auto_exp; /* Auto exposure enabled flag */
- int backlight; /* Backlight exposure algorithm flag */
- int mirror; /* Image is reversed horizontally */
-
- int led_policy; /* LED: off|on|auto; OV511+ only */
-
- struct mutex lock; /* Serializes user-accessible operations */
- int user; /* user count for exclusive use */
-
- int streaming; /* Are we streaming Isochronous? */
- int grabbing; /* Are we grabbing? */
-
- int compress; /* Should the next frame be compressed? */
- int compress_inited; /* Are compression params uploaded? */
-
- int lightfreq; /* Power (lighting) frequency */
- int bandfilt; /* Banding filter enabled flag */
-
- unsigned char *fbuf; /* Videodev buffer area */
- unsigned char *tempfbuf; /* Temporary (intermediate) buffer area */
- unsigned char *rawfbuf; /* Raw camera data buffer area */
-
- int sub_flag; /* Pix Array subcapture on flag */
- int subx; /* Pix Array subcapture x offset */
- int suby; /* Pix Array subcapture y offset */
- int subw; /* Pix Array subcapture width */
- int subh; /* Pix Array subcapture height */
-
- int curframe; /* Current receiving sbuf */
- struct ov511_frame frame[OV511_NUMFRAMES];
-
- struct ov511_sbuf sbuf[OV511_NUMSBUF];
-
- wait_queue_head_t wq; /* Processes waiting */
-
- int snap_enabled; /* Snapshot mode enabled */
-
- int bridge; /* Type of bridge (BRG_*) */
- int bclass; /* Class of bridge (BCL_*) */
- int sensor; /* Type of image sensor chip (SEN_*) */
-
- int packet_size; /* Frame size per isoc desc */
- int packet_numbering; /* Is ISO frame numbering enabled? */
-
- /* Framebuffer/sbuf management */
- int buf_state;
- struct mutex buf_lock;
-
- struct ov51x_decomp_ops *decomp_ops;
-
- /* Stop streaming while changing picture settings */
- int stop_during_set;
-
- int stopped; /* Streaming is temporarily paused */
-
- /* Video decoder stuff */
- int input; /* Composite, S-VIDEO, etc... */
- int num_inputs; /* Number of inputs */
- int norm; /* NTSC / PAL / SECAM */
- int has_decoder; /* Device has a video decoder */
- int pal; /* Device is designed for PAL resolution */
-
- /* ov511 device number ID */
- int nr; /* Stores a device number */
-
- /* I2C interface */
- struct mutex i2c_lock; /* Protect I2C controller regs */
- unsigned char primary_i2c_slave; /* I2C write id of sensor */
-
- /* Control transaction stuff */
- unsigned char *cbuf; /* Buffer for payload */
- struct mutex cbuf_lock;
-};
-
-/* Used to represent a list of values and their respective symbolic names */
-struct symbolic_list {
- int num;
- char *name;
-};
-
-#define NOT_DEFINED_STR "Unknown"
-
-/* Returns the name of the matching element in the symbolic_list array. The
- * end of the list must be marked with an element that has a NULL name.
- */
-static inline char *
-symbolic(struct symbolic_list list[], int num)
-{
- int i;
-
- for (i = 0; list[i].name != NULL; i++)
- if (list[i].num == num)
- return (list[i].name);
-
- return (NOT_DEFINED_STR);
-}
-
-/* Compression stuff */
-
-#define OV511_QUANTABLESIZE 64
-#define OV518_QUANTABLESIZE 32
-
-#define OV511_YQUANTABLE { \
- 0, 1, 1, 2, 2, 3, 3, 4, \
- 1, 1, 1, 2, 2, 3, 4, 4, \
- 1, 1, 2, 2, 3, 4, 4, 4, \
- 2, 2, 2, 3, 4, 4, 4, 4, \
- 2, 2, 3, 4, 4, 5, 5, 5, \
- 3, 3, 4, 4, 5, 5, 5, 5, \
- 3, 4, 4, 4, 5, 5, 5, 5, \
- 4, 4, 4, 4, 5, 5, 5, 5 \
-}
-
-#define OV511_UVQUANTABLE { \
- 0, 2, 2, 3, 4, 4, 4, 4, \
- 2, 2, 2, 4, 4, 4, 4, 4, \
- 2, 2, 3, 4, 4, 4, 4, 4, \
- 3, 4, 4, 4, 4, 4, 4, 4, \
- 4, 4, 4, 4, 4, 4, 4, 4, \
- 4, 4, 4, 4, 4, 4, 4, 4, \
- 4, 4, 4, 4, 4, 4, 4, 4, \
- 4, 4, 4, 4, 4, 4, 4, 4 \
-}
-
-#define OV518_YQUANTABLE { \
- 5, 4, 5, 6, 6, 7, 7, 7, \
- 5, 5, 5, 5, 6, 7, 7, 7, \
- 6, 6, 6, 6, 7, 7, 7, 8, \
- 7, 7, 6, 7, 7, 7, 8, 8 \
-}
-
-#define OV518_UVQUANTABLE { \
- 6, 6, 6, 7, 7, 7, 7, 7, \
- 6, 6, 6, 7, 7, 7, 7, 7, \
- 6, 6, 6, 7, 7, 7, 7, 8, \
- 7, 7, 7, 7, 7, 7, 8, 8 \
-}
-
-#endif
--
1.6.5.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 3/6] Remove obsolete w9968cf v4l1 driver
2010-05-28 17:02 [PATCH 0/6] Remove some obsolete drivers for 2.6.35 Amerigo Wang
2010-05-28 17:02 ` [PATCH 1/6] Remove usbvideo quickcam_messenger driver Amerigo Wang
2010-05-28 17:02 ` [PATCH 2/6] Remove obsolete ov511 driver Amerigo Wang
@ 2010-05-28 17:02 ` Amerigo Wang
2010-05-28 17:03 ` [PATCH 4/6] Remove obsolete ovcamchip sensor framework Amerigo Wang
` (2 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Amerigo Wang @ 2010-05-28 17:02 UTC (permalink / raw)
To: linux-media; +Cc: Hans de Goede, Amerigo Wang
>From a97df96226e89d3539be93ddb5a8df3a2f7edcb6 Mon Sep 17 00:00:00 2001
From: Amerigo Wang <amwang@redhat.com>
Date: Fri, 28 May 2010 17:41:07 +0800
Subject: [PATCH 3/6] Remove obsolete w9968cf v4l1 driver
obsolete v4l1 driver replaced by gspca_ov519
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Amerigo Wang <amwang@redhat.com>
---
Documentation/feature-removal-schedule.txt | 8 -
drivers/media/video/Kconfig | 22 -
drivers/media/video/Makefile | 1 -
drivers/media/video/w9968cf.c | 3620 ----------------------------
drivers/media/video/w9968cf.h | 333 ---
drivers/media/video/w9968cf_decoder.h | 86 -
drivers/media/video/w9968cf_vpp.h | 40 -
7 files changed, 0 insertions(+), 4110 deletions(-)
delete mode 100644 drivers/media/video/w9968cf.c
delete mode 100644 drivers/media/video/w9968cf.h
delete mode 100644 drivers/media/video/w9968cf_decoder.h
delete mode 100644 drivers/media/video/w9968cf_vpp.h
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 044c4bc..e2d630c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -459,14 +459,6 @@ Who: Corentin Chary <corentin.chary@gmail.com>
----------------------------
-What: w9968cf v4l1 driver
-When: 2.6.35
-Files: drivers/media/video/w9968cf*.[ch]
-Why: obsolete v4l1 driver replaced by gspca_ov519
-Who: Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
What: ovcamchip sensor framework
When: 2.6.35
Files: drivers/media/video/ovcamchip/*
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 2b82ab6..a546444 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -1017,28 +1017,6 @@ config VIDEO_OVCAMCHIP
To compile this driver as a module, choose M here: the
module will be called ovcamchip.
-config USB_W9968CF
- tristate "USB W996[87]CF JPEG Dual Mode Camera support (DEPRECATED)"
- depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
- default n
- ---help---
- This driver is DEPRECATED please use the gspca ov519 module
- instead. Note that for the w9968cf support of the gspca module
- you need atleast version 0.6.3 of libv4l.
-
- Say Y here if you want support for cameras based on OV681 or
- Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
-
- This driver has an optional plugin, which is distributed as a
- separate module only (released under GPL). It allows to use higher
- resolutions and framerates, but cannot be included in the official
- Linux kernel for performance purposes.
-
- See <file:Documentation/video4linux/w9968cf.txt> for more info.
-
- To compile this driver as a module, choose M here: the
- module will be called w9968cf.
-
config USB_SE401
tristate "USB SE401 Camera support"
depends on VIDEO_V4L1
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 82aef40..bb702c9 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -129,7 +129,6 @@ obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
obj-$(CONFIG_USB_DABUSB) += dabusb.o
obj-$(CONFIG_USB_SE401) += se401.o
obj-$(CONFIG_USB_STV680) += stv680.o
-obj-$(CONFIG_USB_W9968CF) += w9968cf.o
obj-$(CONFIG_USB_ZR364XX) += zr364xx.o
obj-$(CONFIG_USB_STKWEBCAM) += stkwebcam.o
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
deleted file mode 100644
index d807eea..0000000
--- a/drivers/media/video/w9968cf.c
+++ /dev/null
@@ -1,3620 +0,0 @@
-/***************************************************************************
- * Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip. *
- * *
- * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> *
- * *
- * - Memory management code from bttv driver by Ralph Metzler, *
- * Marcus Metzler and Gerd Knorr. *
- * - I2C interface to kernel, high-level image sensor control routines and *
- * some symbolic names from OV511 driver by Mark W. McClelland. *
- * - Low-level I2C fast write function by Piotr Czerczak. *
- * - Low-level I2C read function by Frederic Jouault. *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the Free Software *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
- ***************************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/kmod.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/ioctl.h>
-#include <linux/delay.h>
-#include <linux/stddef.h>
-#include <asm/page.h>
-#include <asm/uaccess.h>
-#include <linux/page-flags.h>
-#include <linux/videodev.h>
-#include <media/v4l2-ioctl.h>
-
-#include "w9968cf.h"
-#include "w9968cf_decoder.h"
-
-static struct w9968cf_vpp_t* w9968cf_vpp;
-static DECLARE_WAIT_QUEUE_HEAD(w9968cf_vppmod_wait);
-
-static LIST_HEAD(w9968cf_dev_list); /* head of V4L registered cameras list */
-static DEFINE_MUTEX(w9968cf_devlist_mutex); /* semaphore for list traversal */
-
-static DECLARE_RWSEM(w9968cf_disconnect); /* prevent races with open() */
-
-
-/****************************************************************************
- * Module macros and parameters *
- ****************************************************************************/
-
-MODULE_DEVICE_TABLE(usb, winbond_id_table);
-
-MODULE_AUTHOR(W9968CF_MODULE_AUTHOR" "W9968CF_AUTHOR_EMAIL);
-MODULE_DESCRIPTION(W9968CF_MODULE_NAME);
-MODULE_VERSION(W9968CF_MODULE_VERSION);
-MODULE_LICENSE(W9968CF_MODULE_LICENSE);
-MODULE_SUPPORTED_DEVICE("Video");
-
-static unsigned short simcams = W9968CF_SIMCAMS;
-static short video_nr[]={[0 ... W9968CF_MAX_DEVICES-1] = -1}; /*-1=first free*/
-static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_PACKET_SIZE};
-static unsigned short max_buffers[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_BUFFERS};
-static int double_buffer[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_DOUBLE_BUFFER};
-static int clamping[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLAMPING};
-static unsigned short filter_type[]= {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_FILTER_TYPE};
-static int largeview[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_LARGEVIEW};
-static unsigned short decompression[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_DECOMPRESSION};
-static int upscaling[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_UPSCALING};
-static unsigned short force_palette[] = {[0 ... W9968CF_MAX_DEVICES-1] = 0};
-static int force_rgb[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_FORCE_RGB};
-static int autobright[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOBRIGHT};
-static int autoexp[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOEXP};
-static unsigned short lightfreq[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_LIGHTFREQ};
-static int bandingfilter[] = {[0 ... W9968CF_MAX_DEVICES-1]=
- W9968CF_BANDINGFILTER};
-static short clockdiv[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLOCKDIV};
-static int backlight[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_BACKLIGHT};
-static int mirror[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_MIRROR};
-static int monochrome[] = {[0 ... W9968CF_MAX_DEVICES-1]=W9968CF_MONOCHROME};
-static unsigned int brightness[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_BRIGHTNESS};
-static unsigned int hue[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_HUE};
-static unsigned int colour[]={[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_COLOUR};
-static unsigned int contrast[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_CONTRAST};
-static unsigned int whiteness[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_WHITENESS};
-#ifdef W9968CF_DEBUG
-static unsigned short debug = W9968CF_DEBUG_LEVEL;
-static int specific_debug = W9968CF_SPECIFIC_DEBUG;
-#endif
-
-static unsigned int param_nv[24]; /* number of values per parameter */
-
-module_param(simcams, ushort, 0644);
-module_param_array(video_nr, short, ¶m_nv[0], 0444);
-module_param_array(packet_size, uint, ¶m_nv[1], 0444);
-module_param_array(max_buffers, ushort, ¶m_nv[2], 0444);
-module_param_array(double_buffer, bool, ¶m_nv[3], 0444);
-module_param_array(clamping, bool, ¶m_nv[4], 0444);
-module_param_array(filter_type, ushort, ¶m_nv[5], 0444);
-module_param_array(largeview, bool, ¶m_nv[6], 0444);
-module_param_array(decompression, ushort, ¶m_nv[7], 0444);
-module_param_array(upscaling, bool, ¶m_nv[8], 0444);
-module_param_array(force_palette, ushort, ¶m_nv[9], 0444);
-module_param_array(force_rgb, ushort, ¶m_nv[10], 0444);
-module_param_array(autobright, bool, ¶m_nv[11], 0444);
-module_param_array(autoexp, bool, ¶m_nv[12], 0444);
-module_param_array(lightfreq, ushort, ¶m_nv[13], 0444);
-module_param_array(bandingfilter, bool, ¶m_nv[14], 0444);
-module_param_array(clockdiv, short, ¶m_nv[15], 0444);
-module_param_array(backlight, bool, ¶m_nv[16], 0444);
-module_param_array(mirror, bool, ¶m_nv[17], 0444);
-module_param_array(monochrome, bool, ¶m_nv[18], 0444);
-module_param_array(brightness, uint, ¶m_nv[19], 0444);
-module_param_array(hue, uint, ¶m_nv[20], 0444);
-module_param_array(colour, uint, ¶m_nv[21], 0444);
-module_param_array(contrast, uint, ¶m_nv[22], 0444);
-module_param_array(whiteness, uint, ¶m_nv[23], 0444);
-#ifdef W9968CF_DEBUG
-module_param(debug, ushort, 0644);
-module_param(specific_debug, bool, 0644);
-#endif
-
-MODULE_PARM_DESC(simcams,
- "\n<n> Number of cameras allowed to stream simultaneously."
- "\nn may vary from 0 to "
- __MODULE_STRING(W9968CF_MAX_DEVICES)"."
- "\nDefault value is "__MODULE_STRING(W9968CF_SIMCAMS)"."
- "\n");
-MODULE_PARM_DESC(video_nr,
- "\n<-1|n[,...]> Specify V4L minor mode number."
- "\n -1 = use next available (default)"
- "\n n = use minor number n (integer >= 0)"
- "\nYou can specify up to "__MODULE_STRING(W9968CF_MAX_DEVICES)
- " cameras this way."
- "\nFor example:"
- "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
- "\nthe second camera and use auto for the first"
- "\none and for every other camera."
- "\n");
-MODULE_PARM_DESC(packet_size,
- "\n<n[,...]> Specify the maximum data payload"
- "\nsize in bytes for alternate settings, for each device."
- "\nn is scaled between 63 and 1023 "
- "(default is "__MODULE_STRING(W9968CF_PACKET_SIZE)")."
- "\n");
-MODULE_PARM_DESC(max_buffers,
- "\n<n[,...]> For advanced users."
- "\nSpecify the maximum number of video frame buffers"
- "\nto allocate for each device, from 2 to "
- __MODULE_STRING(W9968CF_MAX_BUFFERS)
- ". (default is "__MODULE_STRING(W9968CF_BUFFERS)")."
- "\n");
-MODULE_PARM_DESC(double_buffer,
- "\n<0|1[,...]> "
- "Hardware double buffering: 0 disabled, 1 enabled."
- "\nIt should be enabled if you want smooth video output: if"
- "\nyou obtain out of sync. video, disable it, or try to"
- "\ndecrease the 'clockdiv' module parameter value."
- "\nDefault value is "__MODULE_STRING(W9968CF_DOUBLE_BUFFER)
- " for every device."
- "\n");
-MODULE_PARM_DESC(clamping,
- "\n<0|1[,...]> Video data clamping: 0 disabled, 1 enabled."
- "\nDefault value is "__MODULE_STRING(W9968CF_CLAMPING)
- " for every device."
- "\n");
-MODULE_PARM_DESC(filter_type,
- "\n<0|1|2[,...]> Video filter type."
- "\n0 none, 1 (1-2-1) 3-tap filter, "
- "2 (2-3-6-3-2) 5-tap filter."
- "\nDefault value is "__MODULE_STRING(W9968CF_FILTER_TYPE)
- " for every device."
- "\nThe filter is used to reduce noise and aliasing artifacts"
- "\nproduced by the CCD or CMOS image sensor, and the scaling"
- " process."
- "\n");
-MODULE_PARM_DESC(largeview,
- "\n<0|1[,...]> Large view: 0 disabled, 1 enabled."
- "\nDefault value is "__MODULE_STRING(W9968CF_LARGEVIEW)
- " for every device."
- "\n");
-MODULE_PARM_DESC(upscaling,
- "\n<0|1[,...]> Software scaling (for non-compressed video):"
- "\n0 disabled, 1 enabled."
- "\nDisable it if you have a slow CPU or you don't have"
- " enough memory."
- "\nDefault value is "__MODULE_STRING(W9968CF_UPSCALING)
- " for every device."
- "\nIf 'w9968cf-vpp' is not present, this parameter is"
- " set to 0."
- "\n");
-MODULE_PARM_DESC(decompression,
- "\n<0|1|2[,...]> Software video decompression:"
- "\n- 0 disables decompression (doesn't allow formats needing"
- " decompression)"
- "\n- 1 forces decompression (allows formats needing"
- " decompression only);"
- "\n- 2 allows any permitted formats."
- "\nFormats supporting compressed video are YUV422P and"
- " YUV420P/YUV420 "
- "\nin any resolutions where both width and height are "
- "a multiple of 16."
- "\nDefault value is "__MODULE_STRING(W9968CF_DECOMPRESSION)
- " for every device."
- "\nIf 'w9968cf-vpp' is not present, forcing decompression is "
- "\nnot allowed; in this case this parameter is set to 2."
- "\n");
-MODULE_PARM_DESC(force_palette,
- "\n<0"
- "|" __MODULE_STRING(VIDEO_PALETTE_UYVY)
- "|" __MODULE_STRING(VIDEO_PALETTE_YUV420)
- "|" __MODULE_STRING(VIDEO_PALETTE_YUV422P)
- "|" __MODULE_STRING(VIDEO_PALETTE_YUV420P)
- "|" __MODULE_STRING(VIDEO_PALETTE_YUYV)
- "|" __MODULE_STRING(VIDEO_PALETTE_YUV422)
- "|" __MODULE_STRING(VIDEO_PALETTE_GREY)
- "|" __MODULE_STRING(VIDEO_PALETTE_RGB555)
- "|" __MODULE_STRING(VIDEO_PALETTE_RGB565)
- "|" __MODULE_STRING(VIDEO_PALETTE_RGB24)
- "|" __MODULE_STRING(VIDEO_PALETTE_RGB32)
- "[,...]>"
- " Force picture palette."
- "\nIn order:"
- "\n- 0 allows any of the following formats:"
- "\n- UYVY 16 bpp - Original video, compression disabled"
- "\n- YUV420 12 bpp - Original video, compression enabled"
- "\n- YUV422P 16 bpp - Original video, compression enabled"
- "\n- YUV420P 12 bpp - Original video, compression enabled"
- "\n- YUVY 16 bpp - Software conversion from UYVY"
- "\n- YUV422 16 bpp - Software conversion from UYVY"
- "\n- GREY 8 bpp - Software conversion from UYVY"
- "\n- RGB555 16 bpp - Software conversion from UYVY"
- "\n- RGB565 16 bpp - Software conversion from UYVY"
- "\n- RGB24 24 bpp - Software conversion from UYVY"
- "\n- RGB32 32 bpp - Software conversion from UYVY"
- "\nWhen not 0, this parameter will override 'decompression'."
- "\nDefault value is 0 for every device."
- "\nInitial palette is "
- __MODULE_STRING(W9968CF_PALETTE_DECOMP_ON)"."
- "\nIf 'w9968cf-vpp' is not present, this parameter is"
- " set to 9 (UYVY)."
- "\n");
-MODULE_PARM_DESC(force_rgb,
- "\n<0|1[,...]> Read RGB video data instead of BGR:"
- "\n 1 = use RGB component ordering."
- "\n 0 = use BGR component ordering."
- "\nThis parameter has effect when using RGBX palettes only."
- "\nDefault value is "__MODULE_STRING(W9968CF_FORCE_RGB)
- " for every device."
- "\n");
-MODULE_PARM_DESC(autobright,
- "\n<0|1[,...]> Image sensor automatically changes brightness:"
- "\n 0 = no, 1 = yes"
- "\nDefault value is "__MODULE_STRING(W9968CF_AUTOBRIGHT)
- " for every device."
- "\n");
-MODULE_PARM_DESC(autoexp,
- "\n<0|1[,...]> Image sensor automatically changes exposure:"
- "\n 0 = no, 1 = yes"
- "\nDefault value is "__MODULE_STRING(W9968CF_AUTOEXP)
- " for every device."
- "\n");
-MODULE_PARM_DESC(lightfreq,
- "\n<50|60[,...]> Light frequency in Hz:"
- "\n 50 for European and Asian lighting,"
- " 60 for American lighting."
- "\nDefault value is "__MODULE_STRING(W9968CF_LIGHTFREQ)
- " for every device."
- "\n");
-MODULE_PARM_DESC(bandingfilter,
- "\n<0|1[,...]> Banding filter to reduce effects of"
- " fluorescent lighting:"
- "\n 0 disabled, 1 enabled."
- "\nThis filter tries to reduce the pattern of horizontal"
- "\nlight/dark bands caused by some (usually fluorescent)"
- " lighting."
- "\nDefault value is "__MODULE_STRING(W9968CF_BANDINGFILTER)
- " for every device."
- "\n");
-MODULE_PARM_DESC(clockdiv,
- "\n<-1|n[,...]> "
- "Force pixel clock divisor to a specific value (for experts):"
- "\n n may vary from 0 to 127."
- "\n -1 for automatic value."
- "\nSee also the 'double_buffer' module parameter."
- "\nDefault value is "__MODULE_STRING(W9968CF_CLOCKDIV)
- " for every device."
- "\n");
-MODULE_PARM_DESC(backlight,
- "\n<0|1[,...]> Objects are lit from behind:"
- "\n 0 = no, 1 = yes"
- "\nDefault value is "__MODULE_STRING(W9968CF_BACKLIGHT)
- " for every device."
- "\n");
-MODULE_PARM_DESC(mirror,
- "\n<0|1[,...]> Reverse image horizontally:"
- "\n 0 = no, 1 = yes"
- "\nDefault value is "__MODULE_STRING(W9968CF_MIRROR)
- " for every device."
- "\n");
-MODULE_PARM_DESC(monochrome,
- "\n<0|1[,...]> Use image sensor as monochrome sensor:"
- "\n 0 = no, 1 = yes"
- "\nNot all the sensors support monochrome color."
- "\nDefault value is "__MODULE_STRING(W9968CF_MONOCHROME)
- " for every device."
- "\n");
-MODULE_PARM_DESC(brightness,
- "\n<n[,...]> Set picture brightness (0-65535)."
- "\nDefault value is "__MODULE_STRING(W9968CF_BRIGHTNESS)
- " for every device."
- "\nThis parameter has no effect if 'autobright' is enabled."
- "\n");
-MODULE_PARM_DESC(hue,
- "\n<n[,...]> Set picture hue (0-65535)."
- "\nDefault value is "__MODULE_STRING(W9968CF_HUE)
- " for every device."
- "\n");
-MODULE_PARM_DESC(colour,
- "\n<n[,...]> Set picture saturation (0-65535)."
- "\nDefault value is "__MODULE_STRING(W9968CF_COLOUR)
- " for every device."
- "\n");
-MODULE_PARM_DESC(contrast,
- "\n<n[,...]> Set picture contrast (0-65535)."
- "\nDefault value is "__MODULE_STRING(W9968CF_CONTRAST)
- " for every device."
- "\n");
-MODULE_PARM_DESC(whiteness,
- "\n<n[,...]> Set picture whiteness (0-65535)."
- "\nDefault value is "__MODULE_STRING(W9968CF_WHITENESS)
- " for every device."
- "\n");
-#ifdef W9968CF_DEBUG
-MODULE_PARM_DESC(debug,
- "\n<n> Debugging information level, from 0 to 6:"
- "\n0 = none (use carefully)"
- "\n1 = critical errors"
- "\n2 = significant informations"
- "\n3 = configuration or general messages"
- "\n4 = warnings"
- "\n5 = called functions"
- "\n6 = function internals"
- "\nLevel 5 and 6 are useful for testing only, when only "
- "one device is used."
- "\nDefault value is "__MODULE_STRING(W9968CF_DEBUG_LEVEL)"."
- "\n");
-MODULE_PARM_DESC(specific_debug,
- "\n<0|1> Enable or disable specific debugging messages:"
- "\n0 = print messages concerning every level"
- " <= 'debug' level."
- "\n1 = print messages concerning the level"
- " indicated by 'debug'."
- "\nDefault value is "
- __MODULE_STRING(W9968CF_SPECIFIC_DEBUG)"."
- "\n");
-#endif /* W9968CF_DEBUG */
-
-
-
-/****************************************************************************
- * Some prototypes *
- ****************************************************************************/
-
-/* Video4linux interface */
-static const struct v4l2_file_operations w9968cf_fops;
-static int w9968cf_open(struct file *);
-static int w9968cf_release(struct file *);
-static int w9968cf_mmap(struct file *, struct vm_area_struct *);
-static long w9968cf_ioctl(struct file *, unsigned, unsigned long);
-static ssize_t w9968cf_read(struct file *, char __user *, size_t, loff_t *);
-static long w9968cf_v4l_ioctl(struct file *, unsigned int,
- void __user *);
-
-/* USB-specific */
-static int w9968cf_start_transfer(struct w9968cf_device*);
-static int w9968cf_stop_transfer(struct w9968cf_device*);
-static int w9968cf_write_reg(struct w9968cf_device*, u16 value, u16 index);
-static int w9968cf_read_reg(struct w9968cf_device*, u16 index);
-static int w9968cf_write_fsb(struct w9968cf_device*, u16* data);
-static int w9968cf_write_sb(struct w9968cf_device*, u16 value);
-static int w9968cf_read_sb(struct w9968cf_device*);
-static int w9968cf_upload_quantizationtables(struct w9968cf_device*);
-static void w9968cf_urb_complete(struct urb *urb);
-
-/* Low-level I2C (SMBus) I/O */
-static int w9968cf_smbus_start(struct w9968cf_device*);
-static int w9968cf_smbus_stop(struct w9968cf_device*);
-static int w9968cf_smbus_write_byte(struct w9968cf_device*, u8 v);
-static int w9968cf_smbus_read_byte(struct w9968cf_device*, u8* v);
-static int w9968cf_smbus_write_ack(struct w9968cf_device*);
-static int w9968cf_smbus_read_ack(struct w9968cf_device*);
-static int w9968cf_smbus_refresh_bus(struct w9968cf_device*);
-static int w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam,
- u16 address, u8* value);
-static int w9968cf_i2c_adap_read_byte_data(struct w9968cf_device*, u16 address,
- u8 subaddress, u8* value);
-static int w9968cf_i2c_adap_write_byte(struct w9968cf_device*,
- u16 address, u8 subaddress);
-static int w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device*,
- u16 address, u8 subaddress,
- u8 value);
-
-/* I2C interface to kernel */
-static int w9968cf_i2c_init(struct w9968cf_device*);
-static int w9968cf_i2c_smbus_xfer(struct i2c_adapter*, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size, union i2c_smbus_data*);
-static u32 w9968cf_i2c_func(struct i2c_adapter*);
-
-/* Memory management */
-static void* rvmalloc(unsigned long size);
-static void rvfree(void *mem, unsigned long size);
-static void w9968cf_deallocate_memory(struct w9968cf_device*);
-static int w9968cf_allocate_memory(struct w9968cf_device*);
-
-/* High-level image sensor control functions */
-static int w9968cf_sensor_set_control(struct w9968cf_device*,int cid,int val);
-static int w9968cf_sensor_get_control(struct w9968cf_device*,int cid,int *val);
-static int w9968cf_sensor_cmd(struct w9968cf_device*,
- unsigned int cmd, void *arg);
-static int w9968cf_sensor_init(struct w9968cf_device*);
-static int w9968cf_sensor_update_settings(struct w9968cf_device*);
-static int w9968cf_sensor_get_picture(struct w9968cf_device*);
-static int w9968cf_sensor_update_picture(struct w9968cf_device*,
- struct video_picture pict);
-
-/* Other helper functions */
-static void w9968cf_configure_camera(struct w9968cf_device*,struct usb_device*,
- enum w9968cf_model_id,
- const unsigned short dev_nr);
-static void w9968cf_adjust_configuration(struct w9968cf_device*);
-static int w9968cf_turn_on_led(struct w9968cf_device*);
-static int w9968cf_init_chip(struct w9968cf_device*);
-static inline u16 w9968cf_valid_palette(u16 palette);
-static inline u16 w9968cf_valid_depth(u16 palette);
-static inline u8 w9968cf_need_decompression(u16 palette);
-static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture);
-static int w9968cf_set_window(struct w9968cf_device*, struct video_window);
-static int w9968cf_postprocess_frame(struct w9968cf_device*,
- struct w9968cf_frame_t*);
-static int w9968cf_adjust_window_size(struct w9968cf_device*, u32 *w, u32 *h);
-static void w9968cf_init_framelist(struct w9968cf_device*);
-static void w9968cf_push_frame(struct w9968cf_device*, u8 f_num);
-static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**);
-static void w9968cf_release_resources(struct w9968cf_device*);
-
-
-
-/****************************************************************************
- * Symbolic names *
- ****************************************************************************/
-
-/* Used to represent a list of values and their respective symbolic names */
-struct w9968cf_symbolic_list {
- const int num;
- const char *name;
-};
-
-/*--------------------------------------------------------------------------
- Returns the name of the matching element in the symbolic_list array. The
- end of the list must be marked with an element that has a NULL name.
- --------------------------------------------------------------------------*/
-static inline const char *
-symbolic(struct w9968cf_symbolic_list list[], const int num)
-{
- int i;
-
- for (i = 0; list[i].name != NULL; i++)
- if (list[i].num == num)
- return (list[i].name);
-
- return "Unknown";
-}
-
-static struct w9968cf_symbolic_list camlist[] = {
- { W9968CF_MOD_GENERIC, "W996[87]CF JPEG USB Dual Mode Camera" },
- { W9968CF_MOD_CLVBWGP, "Creative Labs Video Blaster WebCam Go Plus" },
-
- /* Other cameras (having the same descriptors as Generic W996[87]CF) */
- { W9968CF_MOD_ADPVDMA, "Aroma Digi Pen VGA Dual Mode ADG-5000" },
- { W9986CF_MOD_AAU, "AVerMedia AVerTV USB" },
- { W9968CF_MOD_CLVBWG, "Creative Labs Video Blaster WebCam Go" },
- { W9968CF_MOD_LL, "Lebon LDC-035A" },
- { W9968CF_MOD_EEEMC, "Ezonics EZ-802 EZMega Cam" },
- { W9968CF_MOD_OOE, "OmniVision OV8610-EDE" },
- { W9968CF_MOD_ODPVDMPC, "OPCOM Digi Pen VGA Dual Mode Pen Camera" },
- { W9968CF_MOD_PDPII, "Pretec Digi Pen-II" },
- { W9968CF_MOD_PDP480, "Pretec DigiPen-480" },
-
- { -1, NULL }
-};
-
-static struct w9968cf_symbolic_list senlist[] = {
- { CC_OV76BE, "OV76BE" },
- { CC_OV7610, "OV7610" },
- { CC_OV7620, "OV7620" },
- { CC_OV7620AE, "OV7620AE" },
- { CC_OV6620, "OV6620" },
- { CC_OV6630, "OV6630" },
- { CC_OV6630AE, "OV6630AE" },
- { CC_OV6630AF, "OV6630AF" },
- { -1, NULL }
-};
-
-/* Video4Linux1 palettes */
-static struct w9968cf_symbolic_list v4l1_plist[] = {
- { VIDEO_PALETTE_GREY, "GREY" },
- { VIDEO_PALETTE_HI240, "HI240" },
- { VIDEO_PALETTE_RGB565, "RGB565" },
- { VIDEO_PALETTE_RGB24, "RGB24" },
- { VIDEO_PALETTE_RGB32, "RGB32" },
- { VIDEO_PALETTE_RGB555, "RGB555" },
- { VIDEO_PALETTE_YUV422, "YUV422" },
- { VIDEO_PALETTE_YUYV, "YUYV" },
- { VIDEO_PALETTE_UYVY, "UYVY" },
- { VIDEO_PALETTE_YUV420, "YUV420" },
- { VIDEO_PALETTE_YUV411, "YUV411" },
- { VIDEO_PALETTE_RAW, "RAW" },
- { VIDEO_PALETTE_YUV422P, "YUV422P" },
- { VIDEO_PALETTE_YUV411P, "YUV411P" },
- { VIDEO_PALETTE_YUV420P, "YUV420P" },
- { VIDEO_PALETTE_YUV410P, "YUV410P" },
- { -1, NULL }
-};
-
-/* Decoder error codes: */
-static struct w9968cf_symbolic_list decoder_errlist[] = {
- { W9968CF_DEC_ERR_CORRUPTED_DATA, "Corrupted data" },
- { W9968CF_DEC_ERR_BUF_OVERFLOW, "Buffer overflow" },
- { W9968CF_DEC_ERR_NO_SOI, "SOI marker not found" },
- { W9968CF_DEC_ERR_NO_SOF0, "SOF0 marker not found" },
- { W9968CF_DEC_ERR_NO_SOS, "SOS marker not found" },
- { W9968CF_DEC_ERR_NO_EOI, "EOI marker not found" },
- { -1, NULL }
-};
-
-/* URB error codes: */
-static struct w9968cf_symbolic_list urb_errlist[] = {
- { -ENOMEM, "No memory for allocation of internal structures" },
- { -ENOSPC, "The host controller's bandwidth is already consumed" },
- { -ENOENT, "URB was canceled by unlink_urb" },
- { -EXDEV, "ISO transfer only partially completed" },
- { -EAGAIN, "Too match scheduled for the future" },
- { -ENXIO, "URB already queued" },
- { -EFBIG, "Too much ISO frames requested" },
- { -ENOSR, "Buffer error (overrun)" },
- { -EPIPE, "Specified endpoint is stalled (device not responding)"},
- { -EOVERFLOW, "Babble (too much data)" },
- { -EPROTO, "Bit-stuff error (bad cable?)" },
- { -EILSEQ, "CRC/Timeout" },
- { -ETIME, "Device does not respond to token" },
- { -ETIMEDOUT, "Device does not respond to command" },
- { -1, NULL }
-};
-
-/****************************************************************************
- * Memory management functions *
- ****************************************************************************/
-static void* rvmalloc(unsigned long size)
-{
- void* mem;
- unsigned long adr;
-
- size = PAGE_ALIGN(size);
- mem = vmalloc_32(size);
- if (!mem)
- return NULL;
-
- memset(mem, 0, size); /* Clear the ram out, no junk to the user */
- adr = (unsigned long) mem;
- while (size > 0) {
- SetPageReserved(vmalloc_to_page((void *)adr));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
-
- return mem;
-}
-
-
-static void rvfree(void* mem, unsigned long size)
-{
- unsigned long adr;
-
- if (!mem)
- return;
-
- adr = (unsigned long) mem;
- while ((long) size > 0) {
- ClearPageReserved(vmalloc_to_page((void *)adr));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
- vfree(mem);
-}
-
-
-/*--------------------------------------------------------------------------
- Deallocate previously allocated memory.
- --------------------------------------------------------------------------*/
-static void w9968cf_deallocate_memory(struct w9968cf_device* cam)
-{
- u8 i;
-
- /* Free the isochronous transfer buffers */
- for (i = 0; i < W9968CF_URBS; i++) {
- kfree(cam->transfer_buffer[i]);
- cam->transfer_buffer[i] = NULL;
- }
-
- /* Free temporary frame buffer */
- if (cam->frame_tmp.buffer) {
- rvfree(cam->frame_tmp.buffer, cam->frame_tmp.size);
- cam->frame_tmp.buffer = NULL;
- }
-
- /* Free helper buffer */
- if (cam->frame_vpp.buffer) {
- rvfree(cam->frame_vpp.buffer, cam->frame_vpp.size);
- cam->frame_vpp.buffer = NULL;
- }
-
- /* Free video frame buffers */
- if (cam->frame[0].buffer) {
- rvfree(cam->frame[0].buffer, cam->nbuffers*cam->frame[0].size);
- cam->frame[0].buffer = NULL;
- }
-
- cam->nbuffers = 0;
-
- DBG(5, "Memory successfully deallocated")
-}
-
-
-/*--------------------------------------------------------------------------
- Allocate memory buffers for USB transfers and video frames.
- This function is called by open() only.
- Return 0 on success, a negative number otherwise.
- --------------------------------------------------------------------------*/
-static int w9968cf_allocate_memory(struct w9968cf_device* cam)
-{
- const u16 p_size = wMaxPacketSize[cam->altsetting-1];
- void* buff = NULL;
- unsigned long hw_bufsize, vpp_bufsize;
- u8 i, bpp;
-
- /* NOTE: Deallocation is done elsewhere in case of error */
-
- /* Calculate the max amount of raw data per frame from the device */
- hw_bufsize = cam->maxwidth*cam->maxheight*2;
-
- /* Calculate the max buf. size needed for post-processing routines */
- bpp = (w9968cf_vpp) ? 4 : 2;
- if (cam->upscaling)
- vpp_bufsize = max(W9968CF_MAX_WIDTH*W9968CF_MAX_HEIGHT*bpp,
- cam->maxwidth*cam->maxheight*bpp);
- else
- vpp_bufsize = cam->maxwidth*cam->maxheight*bpp;
-
- /* Allocate memory for the isochronous transfer buffers */
- for (i = 0; i < W9968CF_URBS; i++) {
- if (!(cam->transfer_buffer[i] =
- kzalloc(W9968CF_ISO_PACKETS*p_size, GFP_KERNEL))) {
- DBG(1, "Couldn't allocate memory for the isochronous "
- "transfer buffers (%u bytes)",
- p_size * W9968CF_ISO_PACKETS)
- return -ENOMEM;
- }
- }
-
- /* Allocate memory for the temporary frame buffer */
- if (!(cam->frame_tmp.buffer = rvmalloc(hw_bufsize))) {
- DBG(1, "Couldn't allocate memory for the temporary "
- "video frame buffer (%lu bytes)", hw_bufsize)
- return -ENOMEM;
- }
- cam->frame_tmp.size = hw_bufsize;
- cam->frame_tmp.number = -1;
-
- /* Allocate memory for the helper buffer */
- if (w9968cf_vpp) {
- if (!(cam->frame_vpp.buffer = rvmalloc(vpp_bufsize))) {
- DBG(1, "Couldn't allocate memory for the helper buffer"
- " (%lu bytes)", vpp_bufsize)
- return -ENOMEM;
- }
- cam->frame_vpp.size = vpp_bufsize;
- } else
- cam->frame_vpp.buffer = NULL;
-
- /* Allocate memory for video frame buffers */
- cam->nbuffers = cam->max_buffers;
- while (cam->nbuffers >= 2) {
- if ((buff = rvmalloc(cam->nbuffers * vpp_bufsize)))
- break;
- else
- cam->nbuffers--;
- }
-
- if (!buff) {
- DBG(1, "Couldn't allocate memory for the video frame buffers")
- cam->nbuffers = 0;
- return -ENOMEM;
- }
-
- if (cam->nbuffers != cam->max_buffers)
- DBG(2, "Couldn't allocate memory for %u video frame buffers. "
- "Only memory for %u buffers has been allocated",
- cam->max_buffers, cam->nbuffers)
-
- for (i = 0; i < cam->nbuffers; i++) {
- cam->frame[i].buffer = buff + i*vpp_bufsize;
- cam->frame[i].size = vpp_bufsize;
- cam->frame[i].number = i;
- /* Circular list */
- if (i != cam->nbuffers-1)
- cam->frame[i].next = &cam->frame[i+1];
- else
- cam->frame[i].next = &cam->frame[0];
- cam->frame[i].status = F_UNUSED;
- }
-
- DBG(5, "Memory successfully allocated")
- return 0;
-}
-
-
-
-/****************************************************************************
- * USB-specific functions *
- ****************************************************************************/
-
-/*--------------------------------------------------------------------------
- This is an handler function which is called after the URBs are completed.
- It collects multiple data packets coming from the camera by putting them
- into frame buffers: one or more zero data length data packets are used to
- mark the end of a video frame; the first non-zero data packet is the start
- of the next video frame; if an error is encountered in a packet, the entire
- video frame is discarded and grabbed again.
- If there are no requested frames in the FIFO list, packets are collected into
- a temporary buffer.
- --------------------------------------------------------------------------*/
-static void w9968cf_urb_complete(struct urb *urb)
-{
- struct w9968cf_device* cam = (struct w9968cf_device*)urb->context;
- struct w9968cf_frame_t** f;
- unsigned int len, status;
- void* pos;
- u8 i;
- int err = 0;
-
- if ((!cam->streaming) || cam->disconnected) {
- DBG(4, "Got interrupt, but not streaming")
- return;
- }
-
- /* "(*f)" will be used instead of "cam->frame_current" */
- f = &cam->frame_current;
-
- /* If a frame has been requested and we are grabbing into
- the temporary frame, we'll switch to that requested frame */
- if ((*f) == &cam->frame_tmp && *cam->requested_frame) {
- if (cam->frame_tmp.status == F_GRABBING) {
- w9968cf_pop_frame(cam, &cam->frame_current);
- (*f)->status = F_GRABBING;
- (*f)->length = cam->frame_tmp.length;
- memcpy((*f)->buffer, cam->frame_tmp.buffer,
- (*f)->length);
- DBG(6, "Switched from temp. frame to frame #%d",
- (*f)->number)
- }
- }
-
- for (i = 0; i < urb->number_of_packets; i++) {
- len = urb->iso_frame_desc[i].actual_length;
- status = urb->iso_frame_desc[i].status;
- pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
-
- if (status && len != 0) {
- DBG(4, "URB failed, error in data packet "
- "(error #%u, %s)",
- status, symbolic(urb_errlist, status))
- (*f)->status = F_ERROR;
- continue;
- }
-
- if (len) { /* start of frame */
-
- if ((*f)->status == F_UNUSED) {
- (*f)->status = F_GRABBING;
- (*f)->length = 0;
- }
-
- /* Buffer overflows shouldn't happen, however...*/
- if ((*f)->length + len > (*f)->size) {
- DBG(4, "Buffer overflow: bad data packets")
- (*f)->status = F_ERROR;
- }
-
- if ((*f)->status == F_GRABBING) {
- memcpy((*f)->buffer + (*f)->length, pos, len);
- (*f)->length += len;
- }
-
- } else if ((*f)->status == F_GRABBING) { /* end of frame */
-
- DBG(6, "Frame #%d successfully grabbed", (*f)->number)
-
- if (cam->vpp_flag & VPP_DECOMPRESSION) {
- err = w9968cf_vpp->check_headers((*f)->buffer,
- (*f)->length);
- if (err) {
- DBG(4, "Skip corrupted frame: %s",
- symbolic(decoder_errlist, err))
- (*f)->status = F_UNUSED;
- continue; /* grab this frame again */
- }
- }
-
- (*f)->status = F_READY;
- (*f)->queued = 0;
-
- /* Take a pointer to the new frame from the FIFO list.
- If the list is empty,we'll use the temporary frame*/
- if (*cam->requested_frame)
- w9968cf_pop_frame(cam, &cam->frame_current);
- else {
- cam->frame_current = &cam->frame_tmp;
- (*f)->status = F_UNUSED;
- }
-
- } else if ((*f)->status == F_ERROR)
- (*f)->status = F_UNUSED; /* grab it again */
-
- PDBGG("Frame length %lu | pack.#%u | pack.len. %u | state %d",
- (unsigned long)(*f)->length, i, len, (*f)->status)
-
- } /* end for */
-
- /* Resubmit this URB */
- urb->dev = cam->usbdev;
- urb->status = 0;
- spin_lock(&cam->urb_lock);
- if (cam->streaming)
- if ((err = usb_submit_urb(urb, GFP_ATOMIC))) {
- cam->misconfigured = 1;
- DBG(1, "Couldn't resubmit the URB: error %d, %s",
- err, symbolic(urb_errlist, err))
- }
- spin_unlock(&cam->urb_lock);
-
- /* Wake up the user process */
- wake_up_interruptible(&cam->wait_queue);
-}
-
-
-/*---------------------------------------------------------------------------
- Setup the URB structures for the isochronous transfer.
- Submit the URBs so that the data transfer begins.
- Return 0 on success, a negative number otherwise.
- ---------------------------------------------------------------------------*/
-static int w9968cf_start_transfer(struct w9968cf_device* cam)
-{
- struct usb_device *udev = cam->usbdev;
- struct urb* urb;
- const u16 p_size = wMaxPacketSize[cam->altsetting-1];
- u16 w, h, d;
- int vidcapt;
- u32 t_size;
- int err = 0;
- s8 i, j;
-
- for (i = 0; i < W9968CF_URBS; i++) {
- urb = usb_alloc_urb(W9968CF_ISO_PACKETS, GFP_KERNEL);
- if (!urb) {
- for (j = 0; j < i; j++)
- usb_free_urb(cam->urb[j]);
- DBG(1, "Couldn't allocate the URB structures")
- return -ENOMEM;
- }
-
- cam->urb[i] = urb;
- urb->dev = udev;
- urb->context = (void*)cam;
- urb->pipe = usb_rcvisocpipe(udev, 1);
- urb->transfer_flags = URB_ISO_ASAP;
- urb->number_of_packets = W9968CF_ISO_PACKETS;
- urb->complete = w9968cf_urb_complete;
- urb->transfer_buffer = cam->transfer_buffer[i];
- urb->transfer_buffer_length = p_size*W9968CF_ISO_PACKETS;
- urb->interval = 1;
- for (j = 0; j < W9968CF_ISO_PACKETS; j++) {
- urb->iso_frame_desc[j].offset = p_size*j;
- urb->iso_frame_desc[j].length = p_size;
- }
- }
-
- /* Transfer size per frame, in WORD ! */
- d = cam->hw_depth;
- w = cam->hw_width;
- h = cam->hw_height;
-
- t_size = (w*h*d)/16;
-
- err = w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */
- err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */
-
- /* Transfer size */
- err += w9968cf_write_reg(cam, t_size & 0xffff, 0x3d); /* low bits */
- err += w9968cf_write_reg(cam, t_size >> 16, 0x3e); /* high bits */
-
- if (cam->vpp_flag & VPP_DECOMPRESSION)
- err += w9968cf_upload_quantizationtables(cam);
-
- vidcapt = w9968cf_read_reg(cam, 0x16); /* read picture settings */
- err += w9968cf_write_reg(cam, vidcapt|0x8000, 0x16); /* capt. enable */
-
- err += usb_set_interface(udev, 0, cam->altsetting);
- err += w9968cf_write_reg(cam, 0x8a05, 0x3c); /* USB FIFO enable */
-
- if (err || (vidcapt < 0)) {
- for (i = 0; i < W9968CF_URBS; i++)
- usb_free_urb(cam->urb[i]);
- DBG(1, "Couldn't tell the camera to start the data transfer")
- return err;
- }
-
- w9968cf_init_framelist(cam);
-
- /* Begin to grab into the temporary buffer */
- cam->frame_tmp.status = F_UNUSED;
- cam->frame_tmp.queued = 0;
- cam->frame_current = &cam->frame_tmp;
-
- if (!(cam->vpp_flag & VPP_DECOMPRESSION))
- DBG(5, "Isochronous transfer size: %lu bytes/frame",
- (unsigned long)t_size*2)
-
- DBG(5, "Starting the isochronous transfer...")
-
- cam->streaming = 1;
-
- /* Submit the URBs */
- for (i = 0; i < W9968CF_URBS; i++) {
- err = usb_submit_urb(cam->urb[i], GFP_KERNEL);
- if (err) {
- cam->streaming = 0;
- for (j = i-1; j >= 0; j--) {
- usb_kill_urb(cam->urb[j]);
- usb_free_urb(cam->urb[j]);
- }
- DBG(1, "Couldn't send a transfer request to the "
- "USB core (error #%d, %s)", err,
- symbolic(urb_errlist, err))
- return err;
- }
- }
-
- return 0;
-}
-
-
-/*--------------------------------------------------------------------------
- Stop the isochronous transfer and set alternate setting to 0 (0Mb/s).
- Return 0 on success, a negative number otherwise.
- --------------------------------------------------------------------------*/
-static int w9968cf_stop_transfer(struct w9968cf_device* cam)
-{
- struct usb_device *udev = cam->usbdev;
- unsigned long lock_flags;
- int err = 0;
- s8 i;
-
- if (!cam->streaming)
- return 0;
-
- /* This avoids race conditions with usb_submit_urb()
- in the URB completition handler */
- spin_lock_irqsave(&cam->urb_lock, lock_flags);
- cam->streaming = 0;
- spin_unlock_irqrestore(&cam->urb_lock, lock_flags);
-
- for (i = W9968CF_URBS-1; i >= 0; i--)
- if (cam->urb[i]) {
- usb_kill_urb(cam->urb[i]);
- usb_free_urb(cam->urb[i]);
- cam->urb[i] = NULL;
- }
-
- if (cam->disconnected)
- goto exit;
-
- err = w9968cf_write_reg(cam, 0x0a05, 0x3c); /* stop USB transfer */
- err += usb_set_interface(udev, 0, 0); /* 0 Mb/s */
- err += w9968cf_write_reg(cam, 0x0000, 0x39); /* disable JPEG encoder */
- err += w9968cf_write_reg(cam, 0x0000, 0x16); /* stop video capture */
-
- if (err) {
- DBG(2, "Failed to tell the camera to stop the isochronous "
- "transfer. However this is not a critical error.")
- return -EIO;
- }
-
-exit:
- DBG(5, "Isochronous transfer stopped")
- return 0;
-}
-
-
-/*--------------------------------------------------------------------------
- Write a W9968CF register.
- Return 0 on success, -1 otherwise.
- --------------------------------------------------------------------------*/
-static int w9968cf_write_reg(struct w9968cf_device* cam, u16 value, u16 index)
-{
- struct usb_device* udev = cam->usbdev;
- int res;
-
- res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0,
- USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
- value, index, NULL, 0, W9968CF_USB_CTRL_TIMEOUT);
-
- if (res < 0)
- DBG(4, "Failed to write a register "
- "(value 0x%04X, index 0x%02X, error #%d, %s)",
- value, index, res, symbolic(urb_errlist, res))
-
- return (res >= 0) ? 0 : -1;
-}
-
-
-/*--------------------------------------------------------------------------
- Read a W9968CF register.
- Return the register value on success, -1 otherwise.
- --------------------------------------------------------------------------*/
-static int w9968cf_read_reg(struct w9968cf_device* cam, u16 index)
-{
- struct usb_device* udev = cam->usbdev;
- u16* buff = cam->control_buffer;
- int res;
-
- res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 1,
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0, index, buff, 2, W9968CF_USB_CTRL_TIMEOUT);
-
- if (res < 0)
- DBG(4, "Failed to read a register "
- "(index 0x%02X, error #%d, %s)",
- index, res, symbolic(urb_errlist, res))
-
- return (res >= 0) ? (int)(*buff) : -1;
-}
-
-
-/*--------------------------------------------------------------------------
- Write 64-bit data to the fast serial bus registers.
- Return 0 on success, -1 otherwise.
- --------------------------------------------------------------------------*/
-static int w9968cf_write_fsb(struct w9968cf_device* cam, u16* data)
-{
- struct usb_device* udev = cam->usbdev;
- u16 value;
- int res;
-
- value = *data++;
-
- res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0,
- USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
- value, 0x06, data, 6, W9968CF_USB_CTRL_TIMEOUT);
-
- if (res < 0)
- DBG(4, "Failed to write the FSB registers "
- "(error #%d, %s)", res, symbolic(urb_errlist, res))
-
- return (res >= 0) ? 0 : -1;
-}
-
-
-/*--------------------------------------------------------------------------
- Write data to the serial bus control register.
- Return 0 on success, a negative number otherwise.
- --------------------------------------------------------------------------*/
-static int w9968cf_write_sb(struct w9968cf_device* cam, u16 value)
-{
- int err = 0;
-
- err = w9968cf_write_reg(cam, value, 0x01);
- udelay(W9968CF_I2C_BUS_DELAY);
-
- return err;
-}
-
-
-/*--------------------------------------------------------------------------
- Read data from the serial bus control register.
- Return 0 on success, a negative number otherwise.
- --------------------------------------------------------------------------*/
-static int w9968cf_read_sb(struct w9968cf_device* cam)
-{
- int v = 0;
-
- v = w9968cf_read_reg(cam, 0x01);
- udelay(W9968CF_I2C_BUS_DELAY);
-
- return v;
-}
-
-
-/*--------------------------------------------------------------------------
- Upload quantization tables for the JPEG compression.
- This function is called by w9968cf_start_transfer().
- Return 0 on success, a negative number otherwise.
- --------------------------------------------------------------------------*/
-static int w9968cf_upload_quantizationtables(struct w9968cf_device* cam)
-{
- u16 a, b;
- int err = 0, i, j;
-
- err += w9968cf_write_reg(cam, 0x0010, 0x39); /* JPEG clock enable */
-
- for (i = 0, j = 0; i < 32; i++, j += 2) {
- a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j+1]) << 8);
- b = UV_QUANTABLE[j] | ((unsigned)(UV_QUANTABLE[j+1]) << 8);
- err += w9968cf_write_reg(cam, a, 0x40+i);
- err += w9968cf_write_reg(cam, b, 0x60+i);
- }
- err += w9968cf_write_reg(cam, 0x0012, 0x39); /* JPEG encoder enable */
-
- return err;
-}
-
-
-
-/****************************************************************************
- * Low-level I2C I/O functions. *
- * The adapter supports the following I2C transfer functions: *
- * i2c_adap_fastwrite_byte_data() (at 400 kHz bit frequency only) *
- * i2c_adap_read_byte_data() *
- * i2c_adap_read_byte() *
- ****************************************************************************/
-
-static int w9968cf_smbus_start(struct w9968cf_device* cam)
-{
- int err = 0;
-
- err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
- err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
-
- return err;
-}
-
-
-static int w9968cf_smbus_stop(struct w9968cf_device* cam)
-{
- int err = 0;
-
- err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
- err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */
-
- return err;
-}
-
-
-static int w9968cf_smbus_write_byte(struct w9968cf_device* cam, u8 v)
-{
- u8 bit;
- int err = 0, sda;
-
- for (bit = 0 ; bit < 8 ; bit++) {
- sda = (v & 0x80) ? 2 : 0;
- v <<= 1;
- /* SDE=1, SDA=sda, SCL=0 */
- err += w9968cf_write_sb(cam, 0x10 | sda);
- /* SDE=1, SDA=sda, SCL=1 */
- err += w9968cf_write_sb(cam, 0x11 | sda);
- /* SDE=1, SDA=sda, SCL=0 */
- err += w9968cf_write_sb(cam, 0x10 | sda);
- }
-
- return err;
-}
-
-
-static int w9968cf_smbus_read_byte(struct w9968cf_device* cam, u8* v)
-{
- u8 bit;
- int err = 0;
-
- *v = 0;
- for (bit = 0 ; bit < 8 ; bit++) {
- *v <<= 1;
- err += w9968cf_write_sb(cam, 0x0013);
- *v |= (w9968cf_read_sb(cam) & 0x0008) ? 1 : 0;
- err += w9968cf_write_sb(cam, 0x0012);
- }
-
- return err;
-}
-
-
-static int w9968cf_smbus_write_ack(struct w9968cf_device* cam)
-{
- int err = 0;
-
- err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
- err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
- err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
-
- return err;
-}
-
-
-static int w9968cf_smbus_read_ack(struct w9968cf_device* cam)
-{
- int err = 0, sda;
-
- err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */
- sda = (w9968cf_read_sb(cam) & 0x08) ? 1 : 0; /* sda = SDA */
- err += w9968cf_write_sb(cam, 0x0012); /* SDE=1, SDA=1, SCL=0 */
- if (sda < 0)
- err += sda;
- if (sda == 1) {
- DBG(6, "Couldn't receive the ACK")
- err += -1;
- }
-
- return err;
-}
-
-
-/* This seems to refresh the communication through the serial bus */
-static int w9968cf_smbus_refresh_bus(struct w9968cf_device* cam)
-{
- int err = 0, j;
-
- for (j = 1; j <= 10; j++) {
- err = w9968cf_write_reg(cam, 0x0020, 0x01);
- err += w9968cf_write_reg(cam, 0x0000, 0x01);
- if (err)
- break;
- }
-
- return err;
-}
-
-
-/* SMBus protocol: S Addr Wr [A] Subaddr [A] Value [A] P */
-static int
-w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device* cam,
- u16 address, u8 subaddress,u8 value)
-{
- u16* data = cam->data_buffer;
- int err = 0;
-
- err += w9968cf_smbus_refresh_bus(cam);
-
- /* Enable SBUS outputs */
- err += w9968cf_write_sb(cam, 0x0020);
-
- data[0] = 0x082f | ((address & 0x80) ? 0x1500 : 0x0);
- data[0] |= (address & 0x40) ? 0x4000 : 0x0;
- data[1] = 0x2082 | ((address & 0x40) ? 0x0005 : 0x0);
- data[1] |= (address & 0x20) ? 0x0150 : 0x0;
- data[1] |= (address & 0x10) ? 0x5400 : 0x0;
- data[2] = 0x8208 | ((address & 0x08) ? 0x0015 : 0x0);
- data[2] |= (address & 0x04) ? 0x0540 : 0x0;
- data[2] |= (address & 0x02) ? 0x5000 : 0x0;
- data[3] = 0x1d20 | ((address & 0x02) ? 0x0001 : 0x0);
- data[3] |= (address & 0x01) ? 0x0054 : 0x0;
-
- err += w9968cf_write_fsb(cam, data);
-
- data[0] = 0x8208 | ((subaddress & 0x80) ? 0x0015 : 0x0);
- data[0] |= (subaddress & 0x40) ? 0x0540 : 0x0;
- data[0] |= (subaddress & 0x20) ? 0x5000 : 0x0;
- data[1] = 0x0820 | ((subaddress & 0x20) ? 0x0001 : 0x0);
- data[1] |= (subaddress & 0x10) ? 0x0054 : 0x0;
- data[1] |= (subaddress & 0x08) ? 0x1500 : 0x0;
- data[1] |= (subaddress & 0x04) ? 0x4000 : 0x0;
- data[2] = 0x2082 | ((subaddress & 0x04) ? 0x0005 : 0x0);
- data[2] |= (subaddress & 0x02) ? 0x0150 : 0x0;
- data[2] |= (subaddress & 0x01) ? 0x5400 : 0x0;
- data[3] = 0x001d;
-
- err += w9968cf_write_fsb(cam, data);
-
- data[0] = 0x8208 | ((value & 0x80) ? 0x0015 : 0x0);
- data[0] |= (value & 0x40) ? 0x0540 : 0x0;
- data[0] |= (value & 0x20) ? 0x5000 : 0x0;
- data[1] = 0x0820 | ((value & 0x20) ? 0x0001 : 0x0);
- data[1] |= (value & 0x10) ? 0x0054 : 0x0;
- data[1] |= (value & 0x08) ? 0x1500 : 0x0;
- data[1] |= (value & 0x04) ? 0x4000 : 0x0;
- data[2] = 0x2082 | ((value & 0x04) ? 0x0005 : 0x0);
- data[2] |= (value & 0x02) ? 0x0150 : 0x0;
- data[2] |= (value & 0x01) ? 0x5400 : 0x0;
- data[3] = 0xfe1d;
-
- err += w9968cf_write_fsb(cam, data);
-
- /* Disable SBUS outputs */
- err += w9968cf_write_sb(cam, 0x0000);
-
- if (!err)
- DBG(5, "I2C write byte data done, addr.0x%04X, subaddr.0x%02X "
- "value 0x%02X", address, subaddress, value)
- else
- DBG(5, "I2C write byte data failed, addr.0x%04X, "
- "subaddr.0x%02X, value 0x%02X",
- address, subaddress, value)
-
- return err;
-}
-
-
-/* SMBus protocol: S Addr Wr [A] Subaddr [A] P S Addr+1 Rd [A] [Value] NA P */
-static int
-w9968cf_i2c_adap_read_byte_data(struct w9968cf_device* cam,
- u16 address, u8 subaddress,
- u8* value)
-{
- int err = 0;
-
- /* Serial data enable */
- err += w9968cf_write_sb(cam, 0x0013); /* don't change ! */
-
- err += w9968cf_smbus_start(cam);
- err += w9968cf_smbus_write_byte(cam, address);
- err += w9968cf_smbus_read_ack(cam);
- err += w9968cf_smbus_write_byte(cam, subaddress);
- err += w9968cf_smbus_read_ack(cam);
- err += w9968cf_smbus_stop(cam);
- err += w9968cf_smbus_start(cam);
- err += w9968cf_smbus_write_byte(cam, address + 1);
- err += w9968cf_smbus_read_ack(cam);
- err += w9968cf_smbus_read_byte(cam, value);
- err += w9968cf_smbus_write_ack(cam);
- err += w9968cf_smbus_stop(cam);
-
- /* Serial data disable */
- err += w9968cf_write_sb(cam, 0x0000);
-
- if (!err)
- DBG(5, "I2C read byte data done, addr.0x%04X, "
- "subaddr.0x%02X, value 0x%02X",
- address, subaddress, *value)
- else
- DBG(5, "I2C read byte data failed, addr.0x%04X, "
- "subaddr.0x%02X, wrong value 0x%02X",
- address, subaddress, *value)
-
- return err;
-}
-
-
-/* SMBus protocol: S Addr+1 Rd [A] [Value] NA P */
-static int
-w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam,
- u16 address, u8* value)
-{
- int err = 0;
-
- /* Serial data enable */
- err += w9968cf_write_sb(cam, 0x0013);
-
- err += w9968cf_smbus_start(cam);
- err += w9968cf_smbus_write_byte(cam, address + 1);
- err += w9968cf_smbus_read_ack(cam);
- err += w9968cf_smbus_read_byte(cam, value);
- err += w9968cf_smbus_write_ack(cam);
- err += w9968cf_smbus_stop(cam);
-
- /* Serial data disable */
- err += w9968cf_write_sb(cam, 0x0000);
-
- if (!err)
- DBG(5, "I2C read byte done, addr.0x%04X, "
- "value 0x%02X", address, *value)
- else
- DBG(5, "I2C read byte failed, addr.0x%04X, "
- "wrong value 0x%02X", address, *value)
-
- return err;
-}
-
-
-/* SMBus protocol: S Addr Wr [A] Value [A] P */
-static int
-w9968cf_i2c_adap_write_byte(struct w9968cf_device* cam,
- u16 address, u8 value)
-{
- DBG(4, "i2c_write_byte() is an unsupported transfer mode")
- return -EINVAL;
-}
-
-
-
-/****************************************************************************
- * I2C interface to kernel *
- ****************************************************************************/
-
-static int
-w9968cf_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
- unsigned short flags, char read_write, u8 command,
- int size, union i2c_smbus_data *data)
-{
- struct v4l2_device *v4l2_dev = i2c_get_adapdata(adapter);
- struct w9968cf_device *cam = to_cam(v4l2_dev);
- u8 i;
- int err = 0;
-
- if (size == I2C_SMBUS_BYTE) {
- /* Why addr <<= 1? See OVXXX0_SID defines in ovcamchip.h */
- addr <<= 1;
-
- if (read_write == I2C_SMBUS_WRITE)
- err = w9968cf_i2c_adap_write_byte(cam, addr, command);
- else if (read_write == I2C_SMBUS_READ)
- for (i = 1; i <= W9968CF_I2C_RW_RETRIES; i++) {
- err = w9968cf_i2c_adap_read_byte(cam, addr,
- &data->byte);
- if (err) {
- if (w9968cf_smbus_refresh_bus(cam)) {
- err = -EIO;
- break;
- }
- } else
- break;
- }
- } else if (size == I2C_SMBUS_BYTE_DATA) {
- addr <<= 1;
-
- if (read_write == I2C_SMBUS_WRITE)
- err = w9968cf_i2c_adap_fastwrite_byte_data(cam, addr,
- command, data->byte);
- else if (read_write == I2C_SMBUS_READ) {
- for (i = 1; i <= W9968CF_I2C_RW_RETRIES; i++) {
- err = w9968cf_i2c_adap_read_byte_data(cam,addr,
- command, &data->byte);
- if (err) {
- if (w9968cf_smbus_refresh_bus(cam)) {
- err = -EIO;
- break;
- }
- } else
- break;
- }
-
- } else
- return -EINVAL;
-
- } else {
- DBG(4, "Unsupported I2C transfer mode (%d)", size)
- return -EINVAL;
- }
- return err;
-}
-
-
-static u32 w9968cf_i2c_func(struct i2c_adapter* adap)
-{
- return I2C_FUNC_SMBUS_READ_BYTE |
- I2C_FUNC_SMBUS_READ_BYTE_DATA |
- I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
-}
-
-
-static int w9968cf_i2c_init(struct w9968cf_device* cam)
-{
- int err = 0;
-
- static struct i2c_algorithm algo = {
- .smbus_xfer = w9968cf_i2c_smbus_xfer,
- .functionality = w9968cf_i2c_func,
- };
-
- static struct i2c_adapter adap = {
- .owner = THIS_MODULE,
- .algo = &algo,
- };
-
- memcpy(&cam->i2c_adapter, &adap, sizeof(struct i2c_adapter));
- strcpy(cam->i2c_adapter.name, "w9968cf");
- cam->i2c_adapter.dev.parent = &cam->usbdev->dev;
- i2c_set_adapdata(&cam->i2c_adapter, &cam->v4l2_dev);
-
- DBG(6, "Registering I2C adapter with kernel...")
-
- err = i2c_add_adapter(&cam->i2c_adapter);
- if (err)
- DBG(1, "Failed to register the I2C adapter")
- else
- DBG(5, "I2C adapter registered")
-
- return err;
-}
-
-
-
-/****************************************************************************
- * Helper functions *
- ****************************************************************************/
-
-/*--------------------------------------------------------------------------
- Turn on the LED on some webcams. A beep should be heard too.
- Return 0 on success, a negative number otherwise.
- --------------------------------------------------------------------------*/
-static int w9968cf_turn_on_led(struct w9968cf_device* cam)
-{
- int err = 0;
-
- err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power-down */
- err += w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */
- err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */
- err += w9968cf_write_reg(cam, 0x0010, 0x01); /* serial bus, SDS high */
- err += w9968cf_write_reg(cam, 0x0000, 0x01); /* serial bus, SDS low */
- err += w9968cf_write_reg(cam, 0x0010, 0x01); /* ..high 'beep-beep' */
-
- if (err)
- DBG(2, "Couldn't turn on the LED")
-
- DBG(5, "LED turned on")
-
- return err;
-}
-
-
-/*--------------------------------------------------------------------------
- Write some registers for the device initialization.
- This function is called once on open().
- Return 0 on success, a negative number otherwise.
- --------------------------------------------------------------------------*/
-static int w9968cf_init_chip(struct w9968cf_device* cam)
-{
- unsigned long hw_bufsize = cam->maxwidth*cam->maxheight*2,
- y0 = 0x0000,
- u0 = y0 + hw_bufsize/2,
- v0 = u0 + hw_bufsize/4,
- y1 = v0 + hw_bufsize/4,
- u1 = y1 + hw_bufsize/2,
- v1 = u1 + hw_bufsize/4;
- int err = 0;
-
- err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power off */
- err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* power on */
-
- err += w9968cf_write_reg(cam, 0x405d, 0x03); /* DRAM timings */
- err += w9968cf_write_reg(cam, 0x0030, 0x04); /* SDRAM timings */
-
- err += w9968cf_write_reg(cam, y0 & 0xffff, 0x20); /* Y buf.0, low */
- err += w9968cf_write_reg(cam, y0 >> 16, 0x21); /* Y buf.0, high */
- err += w9968cf_write_reg(cam, u0 & 0xffff, 0x24); /* U buf.0, low */
- err += w9968cf_write_reg(cam, u0 >> 16, 0x25); /* U buf.0, high */
- err += w9968cf_write_reg(cam, v0 & 0xffff, 0x28); /* V buf.0, low */
- err += w9968cf_write_reg(cam, v0 >> 16, 0x29); /* V buf.0, high */
-
- err += w9968cf_write_reg(cam, y1 & 0xffff, 0x22); /* Y buf.1, low */
- err += w9968cf_write_reg(cam, y1 >> 16, 0x23); /* Y buf.1, high */
- err += w9968cf_write_reg(cam, u1 & 0xffff, 0x26); /* U buf.1, low */
- err += w9968cf_write_reg(cam, u1 >> 16, 0x27); /* U buf.1, high */
- err += w9968cf_write_reg(cam, v1 & 0xffff, 0x2a); /* V buf.1, low */
- err += w9968cf_write_reg(cam, v1 >> 16, 0x2b); /* V buf.1, high */
-
- err += w9968cf_write_reg(cam, y1 & 0xffff, 0x32); /* JPEG buf 0 low */
- err += w9968cf_write_reg(cam, y1 >> 16, 0x33); /* JPEG buf 0 high */
-
- err += w9968cf_write_reg(cam, y1 & 0xffff, 0x34); /* JPEG buf 1 low */
- err += w9968cf_write_reg(cam, y1 >> 16, 0x35); /* JPEG bug 1 high */
-
- err += w9968cf_write_reg(cam, 0x0000, 0x36);/* JPEG restart interval */
- err += w9968cf_write_reg(cam, 0x0804, 0x37);/*JPEG VLE FIFO threshold*/
- err += w9968cf_write_reg(cam, 0x0000, 0x38);/* disable hw up-scaling */
- err += w9968cf_write_reg(cam, 0x0000, 0x3f); /* JPEG/MCTL test data */
-
- err += w9968cf_set_picture(cam, cam->picture); /* this before */
- err += w9968cf_set_window(cam, cam->window);
-
- if (err)
- DBG(1, "Chip initialization failed")
- else
- DBG(5, "Chip successfully initialized")
-
- return err;
-}
-
-
-/*--------------------------------------------------------------------------
- Return non-zero if the palette is supported, 0 otherwise.
- --------------------------------------------------------------------------*/
-static inline u16 w9968cf_valid_palette(u16 palette)
-{
- u8 i = 0;
- while (w9968cf_formatlist[i].palette != 0) {
- if (palette == w9968cf_formatlist[i].palette)
- return palette;
- i++;
- }
- return 0;
-}
-
-
-/*--------------------------------------------------------------------------
- Return the depth corresponding to the given palette.
- Palette _must_ be supported !
- --------------------------------------------------------------------------*/
-static inline u16 w9968cf_valid_depth(u16 palette)
-{
- u8 i=0;
- while (w9968cf_formatlist[i].palette != palette)
- i++;
-
- return w9968cf_formatlist[i].depth;
-}
-
-
-/*--------------------------------------------------------------------------
- Return non-zero if the format requires decompression, 0 otherwise.
- --------------------------------------------------------------------------*/
-static inline u8 w9968cf_need_decompression(u16 palette)
-{
- u8 i = 0;
- while (w9968cf_formatlist[i].palette != 0) {
- if (palette == w9968cf_formatlist[i].palette)
- return w9968cf_formatlist[i].compression;
- i++;
- }
- return 0;
-}
-
-
-/*--------------------------------------------------------------------------
- Change the picture settings of the camera.
- Return 0 on success, a negative number otherwise.
- --------------------------------------------------------------------------*/
-static int
-w9968cf_set_picture(struct w9968cf_device* cam, struct video_picture pict)
-{
- u16 fmt, hw_depth, hw_palette, reg_v = 0x0000;
- int err = 0;
-
- /* Make sure we are using a valid depth */
- pict.depth = w9968cf_valid_depth(pict.palette);
-
- fmt = pict.palette;
-
- hw_depth = pict.depth; /* depth used by the winbond chip */
- hw_palette = pict.palette; /* palette used by the winbond chip */
-
- /* VS & HS polarities */
- reg_v = (cam->vs_polarity << 12) | (cam->hs_polarity << 11);
-
- switch (fmt)
- {
- case VIDEO_PALETTE_UYVY:
- reg_v |= 0x0000;
- cam->vpp_flag = VPP_NONE;
- break;
- case VIDEO_PALETTE_YUV422P:
- reg_v |= 0x0002;
- cam->vpp_flag = VPP_DECOMPRESSION;
- break;
- case VIDEO_PALETTE_YUV420:
- case VIDEO_PALETTE_YUV420P:
- reg_v |= 0x0003;
- cam->vpp_flag = VPP_DECOMPRESSION;
- break;
- case VIDEO_PALETTE_YUYV:
- case VIDEO_PALETTE_YUV422:
- reg_v |= 0x0000;
- cam->vpp_flag = VPP_SWAP_YUV_BYTES;
- hw_palette = VIDEO_PALETTE_UYVY;
- break;
- /* Original video is used instead of RGBX palettes.
- Software conversion later. */
- case VIDEO_PALETTE_GREY:
- case VIDEO_PALETTE_RGB555:
- case VIDEO_PALETTE_RGB565:
- case VIDEO_PALETTE_RGB24:
- case VIDEO_PALETTE_RGB32:
- reg_v |= 0x0000; /* UYVY 16 bit is used */
- hw_depth = 16;
- hw_palette = VIDEO_PALETTE_UYVY;
- cam->vpp_flag = VPP_UYVY_TO_RGBX;
- break;
- }
-
- /* NOTE: due to memory issues, it is better to disable the hardware
- double buffering during compression */
- if (cam->double_buffer && !(cam->vpp_flag & VPP_DECOMPRESSION))
- reg_v |= 0x0080;
-
- if (cam->clamping)
- reg_v |= 0x0020;
-
- if (cam->filter_type == 1)
- reg_v |= 0x0008;
- else if (cam->filter_type == 2)
- reg_v |= 0x000c;
-
- if ((err = w9968cf_write_reg(cam, reg_v, 0x16)))
- goto error;
-
- if ((err = w9968cf_sensor_update_picture(cam, pict)))
- goto error;
-
- /* If all went well, update the device data structure */
- memcpy(&cam->picture, &pict, sizeof(pict));
- cam->hw_depth = hw_depth;
- cam->hw_palette = hw_palette;
-
- /* Settings changed, so we clear the frame buffers */
- memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size);
-
- DBG(4, "Palette is %s, depth is %u bpp",
- symbolic(v4l1_plist, pict.palette), pict.depth)
-
- return 0;
-
-error:
- DBG(1, "Failed to change picture settings")
- return err;
-}
-
-
-/*--------------------------------------------------------------------------
- Change the capture area size of the camera.
- This function _must_ be called _after_ w9968cf_set_picture().
- Return 0 on success, a negative number otherwise.
- --------------------------------------------------------------------------*/
-static int
-w9968cf_set_window(struct w9968cf_device* cam, struct video_window win)
-{
- u16 x, y, w, h, scx, scy, cw, ch, ax, ay;
- unsigned long fw, fh;
- struct ovcamchip_window s_win;
- int err = 0;
-
- /* Work around to avoid FP arithmetics */
- #define SC(x) ((x) << 10)
- #define UNSC(x) ((x) >> 10)
-
- /* Make sure we are using a supported resolution */
- if ((err = w9968cf_adjust_window_size(cam, &win.width, &win.height)))
- goto error;
-
- /* Scaling factors */
- fw = SC(win.width) / cam->maxwidth;
- fh = SC(win.height) / cam->maxheight;
-
- /* Set up the width and height values used by the chip */
- if ((win.width > cam->maxwidth) || (win.height > cam->maxheight)) {
- cam->vpp_flag |= VPP_UPSCALE;
- /* Calculate largest w,h mantaining the same w/h ratio */
- w = (fw >= fh) ? cam->maxwidth : SC(win.width)/fh;
- h = (fw >= fh) ? SC(win.height)/fw : cam->maxheight;
- if (w < cam->minwidth) /* just in case */
- w = cam->minwidth;
- if (h < cam->minheight) /* just in case */
- h = cam->minheight;
- } else {
- cam->vpp_flag &= ~VPP_UPSCALE;
- w = win.width;
- h = win.height;
- }
-
- /* x,y offsets of the cropped area */
- scx = cam->start_cropx;
- scy = cam->start_cropy;
-
- /* Calculate cropped area manteining the right w/h ratio */
- if (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) {
- cw = (fw >= fh) ? cam->maxwidth : SC(win.width)/fh;
- ch = (fw >= fh) ? SC(win.height)/fw : cam->maxheight;
- } else {
- cw = w;
- ch = h;
- }
-
- /* Setup the window of the sensor */
- s_win.format = VIDEO_PALETTE_UYVY;
- s_win.width = cam->maxwidth;
- s_win.height = cam->maxheight;
- s_win.quarter = 0; /* full progressive video */
-
- /* Center it */
- s_win.x = (s_win.width - cw) / 2;
- s_win.y = (s_win.height - ch) / 2;
-
- /* Clock divisor */
- if (cam->clockdiv >= 0)
- s_win.clockdiv = cam->clockdiv; /* manual override */
- else
- switch (cam->sensor) {
- case CC_OV6620:
- s_win.clockdiv = 0;
- break;
- case CC_OV6630:
- s_win.clockdiv = 0;
- break;
- case CC_OV76BE:
- case CC_OV7610:
- case CC_OV7620:
- s_win.clockdiv = 0;
- break;
- default:
- s_win.clockdiv = W9968CF_DEF_CLOCKDIVISOR;
- }
-
- /* We have to scale win.x and win.y offsets */
- if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE))
- || (cam->vpp_flag & VPP_UPSCALE) ) {
- ax = SC(win.x)/fw;
- ay = SC(win.y)/fh;
- } else {
- ax = win.x;
- ay = win.y;
- }
-
- if ((ax + cw) > cam->maxwidth)
- ax = cam->maxwidth - cw;
-
- if ((ay + ch) > cam->maxheight)
- ay = cam->maxheight - ch;
-
- /* Adjust win.x, win.y */
- if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE))
- || (cam->vpp_flag & VPP_UPSCALE) ) {
- win.x = UNSC(ax*fw);
- win.y = UNSC(ay*fh);
- } else {
- win.x = ax;
- win.y = ay;
- }
-
- /* Offsets used by the chip */
- x = ax + s_win.x;
- y = ay + s_win.y;
-
- /* Go ! */
- if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_MODE, &s_win)))
- goto error;
-
- err += w9968cf_write_reg(cam, scx + x, 0x10);
- err += w9968cf_write_reg(cam, scy + y, 0x11);
- err += w9968cf_write_reg(cam, scx + x + cw, 0x12);
- err += w9968cf_write_reg(cam, scy + y + ch, 0x13);
- err += w9968cf_write_reg(cam, w, 0x14);
- err += w9968cf_write_reg(cam, h, 0x15);
-
- /* JPEG width & height */
- err += w9968cf_write_reg(cam, w, 0x30);
- err += w9968cf_write_reg(cam, h, 0x31);
-
- /* Y & UV frame buffer strides (in WORD) */
- if (cam->vpp_flag & VPP_DECOMPRESSION) {
- err += w9968cf_write_reg(cam, w/2, 0x2c);
- err += w9968cf_write_reg(cam, w/4, 0x2d);
- } else
- err += w9968cf_write_reg(cam, w, 0x2c);
-
- if (err)
- goto error;
-
- /* If all went well, update the device data structure */
- memcpy(&cam->window, &win, sizeof(win));
- cam->hw_width = w;
- cam->hw_height = h;
-
- /* Settings changed, so we clear the frame buffers */
- memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size);
-
- DBG(4, "The capture area is %dx%d, Offset (x,y)=(%u,%u)",
- win.width, win.height, win.x, win.y)
-
- PDBGG("x=%u ,y=%u, w=%u, h=%u, ax=%u, ay=%u, s_win.x=%u, s_win.y=%u, "
- "cw=%u, ch=%u, win.x=%u, win.y=%u, win.width=%u, win.height=%u",
- x, y, w, h, ax, ay, s_win.x, s_win.y, cw, ch, win.x, win.y,
- win.width, win.height)
-
- return 0;
-
-error:
- DBG(1, "Failed to change the capture area size")
- return err;
-}
-
-
-/*--------------------------------------------------------------------------
- Adjust the asked values for window width and height.
- Return 0 on success, -1 otherwise.
- --------------------------------------------------------------------------*/
-static int
-w9968cf_adjust_window_size(struct w9968cf_device *cam, u32 *width, u32 *height)
-{
- unsigned int maxw, maxh, align;
-
- maxw = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
- w9968cf_vpp ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
- : cam->maxwidth;
- maxh = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
- w9968cf_vpp ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
- : cam->maxheight;
- align = (cam->vpp_flag & VPP_DECOMPRESSION) ? 4 : 0;
-
- v4l_bound_align_image(width, cam->minwidth, maxw, align,
- height, cam->minheight, maxh, align, 0);
-
- PDBGG("Window size adjusted w=%u, h=%u ", *width, *height)
-
- return 0;
-}
-
-
-/*--------------------------------------------------------------------------
- Initialize the FIFO list of requested frames.
- --------------------------------------------------------------------------*/
-static void w9968cf_init_framelist(struct w9968cf_device* cam)
-{
- u8 i;
-
- for (i = 0; i < cam->nbuffers; i++) {
- cam->requested_frame[i] = NULL;
- cam->frame[i].queued = 0;
- cam->frame[i].status = F_UNUSED;
- }
-}
-
-
-/*--------------------------------------------------------------------------
- Add a frame in the FIFO list of requested frames.
- This function is called in process context.
- --------------------------------------------------------------------------*/
-static void w9968cf_push_frame(struct w9968cf_device* cam, u8 f_num)
-{
- u8 f;
- unsigned long lock_flags;
-
- spin_lock_irqsave(&cam->flist_lock, lock_flags);
-
- for (f=0; cam->requested_frame[f] != NULL; f++);
- cam->requested_frame[f] = &cam->frame[f_num];
- cam->frame[f_num].queued = 1;
- cam->frame[f_num].status = F_UNUSED; /* clear the status */
-
- spin_unlock_irqrestore(&cam->flist_lock, lock_flags);
-
- DBG(6, "Frame #%u pushed into the FIFO list. Position %u", f_num, f)
-}
-
-
-/*--------------------------------------------------------------------------
- Read, store and remove the first pointer in the FIFO list of requested
- frames. This function is called in interrupt context.
- --------------------------------------------------------------------------*/
-static void
-w9968cf_pop_frame(struct w9968cf_device* cam, struct w9968cf_frame_t** framep)
-{
- u8 i;
-
- spin_lock(&cam->flist_lock);
-
- *framep = cam->requested_frame[0];
-
- /* Shift the list of pointers */
- for (i = 0; i < cam->nbuffers-1; i++)
- cam->requested_frame[i] = cam->requested_frame[i+1];
- cam->requested_frame[i] = NULL;
-
- spin_unlock(&cam->flist_lock);
-
- DBG(6,"Popped frame #%d from the list", (*framep)->number)
-}
-
-
-/*--------------------------------------------------------------------------
- High-level video post-processing routine on grabbed frames.
- Return 0 on success, a negative number otherwise.
- --------------------------------------------------------------------------*/
-static int
-w9968cf_postprocess_frame(struct w9968cf_device* cam,
- struct w9968cf_frame_t* fr)
-{
- void *pIn = fr->buffer, *pOut = cam->frame_vpp.buffer, *tmp;
- u16 w = cam->window.width,
- h = cam->window.height,
- d = cam->picture.depth,
- fmt = cam->picture.palette,
- rgb = cam->force_rgb,
- hw_w = cam->hw_width,
- hw_h = cam->hw_height,
- hw_d = cam->hw_depth;
- int err = 0;
-
- #define _PSWAP(pIn, pOut) {tmp = (pIn); (pIn) = (pOut); (pOut) = tmp;}
-
- if (cam->vpp_flag & VPP_DECOMPRESSION) {
- memcpy(pOut, pIn, fr->length);
- _PSWAP(pIn, pOut)
- err = w9968cf_vpp->decode(pIn, fr->length, hw_w, hw_h, pOut);
- PDBGG("Compressed frame length: %lu",(unsigned long)fr->length)
- fr->length = (hw_w*hw_h*hw_d)/8;
- _PSWAP(pIn, pOut)
- if (err) {
- DBG(4, "An error occurred while decoding the frame: "
- "%s", symbolic(decoder_errlist, err))
- return err;
- } else
- DBG(6, "Frame decoded")
- }
-
- if (cam->vpp_flag & VPP_SWAP_YUV_BYTES) {
- w9968cf_vpp->swap_yuvbytes(pIn, fr->length);
- DBG(6, "Original UYVY component ordering changed")
- }
-
- if (cam->vpp_flag & VPP_UPSCALE) {
- w9968cf_vpp->scale_up(pIn, pOut, hw_w, hw_h, hw_d, w, h);
- fr->length = (w*h*hw_d)/8;
- _PSWAP(pIn, pOut)
- DBG(6, "Vertical up-scaling done: %u,%u,%ubpp->%u,%u",
- hw_w, hw_h, hw_d, w, h)
- }
-
- if (cam->vpp_flag & VPP_UYVY_TO_RGBX) {
- w9968cf_vpp->uyvy_to_rgbx(pIn, fr->length, pOut, fmt, rgb);
- fr->length = (w*h*d)/8;
- _PSWAP(pIn, pOut)
- DBG(6, "UYVY-16bit to %s conversion done",
- symbolic(v4l1_plist, fmt))
- }
-
- if (pOut == fr->buffer)
- memcpy(fr->buffer, cam->frame_vpp.buffer, fr->length);
-
- return 0;
-}
-
-
-
-/****************************************************************************
- * Image sensor control routines *
- ****************************************************************************/
-
-static int
-w9968cf_sensor_set_control(struct w9968cf_device* cam, int cid, int val)
-{
- struct ovcamchip_control ctl;
- int err;
-
- ctl.id = cid;
- ctl.value = val;
-
- err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_CTRL, &ctl);
-
- return err;
-}
-
-
-static int
-w9968cf_sensor_get_control(struct w9968cf_device* cam, int cid, int* val)
-{
- struct ovcamchip_control ctl;
- int err;
-
- ctl.id = cid;
-
- err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_G_CTRL, &ctl);
- if (!err)
- *val = ctl.value;
-
- return err;
-}
-
-
-static int
-w9968cf_sensor_cmd(struct w9968cf_device* cam, unsigned int cmd, void* arg)
-{
- int rc;
-
- rc = v4l2_subdev_call(cam->sensor_sd, core, ioctl, cmd, arg);
- /* The I2C driver returns -EPERM on non-supported controls */
- return (rc < 0 && rc != -EPERM) ? rc : 0;
-}
-
-
-/*--------------------------------------------------------------------------
- Update some settings of the image sensor.
- Returns: 0 on success, a negative number otherwise.
- --------------------------------------------------------------------------*/
-static int w9968cf_sensor_update_settings(struct w9968cf_device* cam)
-{
- int err = 0;
-
- /* Auto brightness */
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOBRIGHT,
- cam->auto_brt);
- if (err)
- return err;
-
- /* Auto exposure */
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOEXP,
- cam->auto_exp);
- if (err)
- return err;
-
- /* Banding filter */
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BANDFILT,
- cam->bandfilt);
- if (err)
- return err;
-
- /* Light frequency */
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_FREQ,
- cam->lightfreq);
- if (err)
- return err;
-
- /* Back light */
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BACKLIGHT,
- cam->backlight);
- if (err)
- return err;
-
- /* Mirror */
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_MIRROR,
- cam->mirror);
- if (err)
- return err;
-
- return 0;
-}
-
-
-/*--------------------------------------------------------------------------
- Get some current picture settings from the image sensor and update the
- internal 'picture' structure of the camera.
- Returns: 0 on success, a negative number otherwise.
- --------------------------------------------------------------------------*/
-static int w9968cf_sensor_get_picture(struct w9968cf_device* cam)
-{
- int err, v;
-
- err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_CONT, &v);
- if (err)
- return err;
- cam->picture.contrast = v;
-
- err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_BRIGHT, &v);
- if (err)
- return err;
- cam->picture.brightness = v;
-
- err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_SAT, &v);
- if (err)
- return err;
- cam->picture.colour = v;
-
- err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_HUE, &v);
- if (err)
- return err;
- cam->picture.hue = v;
-
- DBG(5, "Got picture settings from the image sensor")
-
- PDBGG("Brightness, contrast, hue, colour, whiteness are "
- "%u,%u,%u,%u,%u", cam->picture.brightness,cam->picture.contrast,
- cam->picture.hue, cam->picture.colour, cam->picture.whiteness)
-
- return 0;
-}
-
-
-/*--------------------------------------------------------------------------
- Update picture settings of the image sensor.
- Returns: 0 on success, a negative number otherwise.
- --------------------------------------------------------------------------*/
-static int
-w9968cf_sensor_update_picture(struct w9968cf_device* cam,
- struct video_picture pict)
-{
- int err = 0;
-
- if ((!cam->sensor_initialized)
- || pict.contrast != cam->picture.contrast) {
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_CONT,
- pict.contrast);
- if (err)
- goto fail;
- DBG(4, "Contrast changed from %u to %u",
- cam->picture.contrast, pict.contrast)
- cam->picture.contrast = pict.contrast;
- }
-
- if (((!cam->sensor_initialized) ||
- pict.brightness != cam->picture.brightness) && (!cam->auto_brt)) {
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BRIGHT,
- pict.brightness);
- if (err)
- goto fail;
- DBG(4, "Brightness changed from %u to %u",
- cam->picture.brightness, pict.brightness)
- cam->picture.brightness = pict.brightness;
- }
-
- if ((!cam->sensor_initialized) || pict.colour != cam->picture.colour) {
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_SAT,
- pict.colour);
- if (err)
- goto fail;
- DBG(4, "Colour changed from %u to %u",
- cam->picture.colour, pict.colour)
- cam->picture.colour = pict.colour;
- }
-
- if ((!cam->sensor_initialized) || pict.hue != cam->picture.hue) {
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_HUE,
- pict.hue);
- if (err)
- goto fail;
- DBG(4, "Hue changed from %u to %u",
- cam->picture.hue, pict.hue)
- cam->picture.hue = pict.hue;
- }
-
- return 0;
-
-fail:
- DBG(4, "Failed to change sensor picture setting")
- return err;
-}
-
-
-
-/****************************************************************************
- * Camera configuration *
- ****************************************************************************/
-
-/*--------------------------------------------------------------------------
- This function is called when a supported image sensor is detected.
- Return 0 if the initialization succeeds, a negative number otherwise.
- --------------------------------------------------------------------------*/
-static int w9968cf_sensor_init(struct w9968cf_device* cam)
-{
- int err = 0;
-
- if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_INITIALIZE,
- &cam->monochrome)))
- goto error;
-
- if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_Q_SUBTYPE,
- &cam->sensor)))
- goto error;
-
- /* NOTE: Make sure width and height are a multiple of 16 */
- switch (v4l2_i2c_subdev_addr(cam->sensor_sd)) {
- case OV6xx0_SID:
- cam->maxwidth = 352;
- cam->maxheight = 288;
- cam->minwidth = 64;
- cam->minheight = 48;
- break;
- case OV7xx0_SID:
- cam->maxwidth = 640;
- cam->maxheight = 480;
- cam->minwidth = 64;
- cam->minheight = 48;
- break;
- default:
- DBG(1, "Not supported image sensor detected for %s",
- symbolic(camlist, cam->id))
- return -EINVAL;
- }
-
- /* These values depend on the ones in the ovxxx0.c sources */
- switch (cam->sensor) {
- case CC_OV7620:
- cam->start_cropx = 287;
- cam->start_cropy = 35;
- /* Seems to work around a bug in the image sensor */
- cam->vs_polarity = 1;
- cam->hs_polarity = 1;
- break;
- default:
- cam->start_cropx = 320;
- cam->start_cropy = 35;
- cam->vs_polarity = 1;
- cam->hs_polarity = 0;
- }
-
- if ((err = w9968cf_sensor_update_settings(cam)))
- goto error;
-
- if ((err = w9968cf_sensor_update_picture(cam, cam->picture)))
- goto error;
-
- cam->sensor_initialized = 1;
-
- DBG(2, "%s image sensor initialized", symbolic(senlist, cam->sensor))
- return 0;
-
-error:
- cam->sensor_initialized = 0;
- cam->sensor = CC_UNKNOWN;
- DBG(1, "Image sensor initialization failed for %s (%s). "
- "Try to detach and attach this device again",
- symbolic(camlist, cam->id), video_device_node_name(cam->v4ldev))
- return err;
-}
-
-
-/*--------------------------------------------------------------------------
- Fill some basic fields in the main device data structure.
- This function is called once on w9968cf_usb_probe() for each recognized
- camera.
- --------------------------------------------------------------------------*/
-static void
-w9968cf_configure_camera(struct w9968cf_device* cam,
- struct usb_device* udev,
- enum w9968cf_model_id mod_id,
- const unsigned short dev_nr)
-{
- mutex_init(&cam->fileop_mutex);
- init_waitqueue_head(&cam->open);
- spin_lock_init(&cam->urb_lock);
- spin_lock_init(&cam->flist_lock);
-
- cam->users = 0;
- cam->disconnected = 0;
- cam->id = mod_id;
- cam->sensor = CC_UNKNOWN;
- cam->sensor_initialized = 0;
-
- /* Calculate the alternate setting number (from 1 to 16)
- according to the 'packet_size' module parameter */
- if (packet_size[dev_nr] < W9968CF_MIN_PACKET_SIZE)
- packet_size[dev_nr] = W9968CF_MIN_PACKET_SIZE;
- for (cam->altsetting = 1;
- packet_size[dev_nr] < wMaxPacketSize[cam->altsetting-1];
- cam->altsetting++);
-
- cam->max_buffers = (max_buffers[dev_nr] < 2 ||
- max_buffers[dev_nr] > W9968CF_MAX_BUFFERS)
- ? W9968CF_BUFFERS : (u8)max_buffers[dev_nr];
-
- cam->double_buffer = (double_buffer[dev_nr] == 0 ||
- double_buffer[dev_nr] == 1)
- ? (u8)double_buffer[dev_nr]:W9968CF_DOUBLE_BUFFER;
-
- cam->clamping = (clamping[dev_nr] == 0 || clamping[dev_nr] == 1)
- ? (u8)clamping[dev_nr] : W9968CF_CLAMPING;
-
- cam->filter_type = (filter_type[dev_nr] == 0 ||
- filter_type[dev_nr] == 1 ||
- filter_type[dev_nr] == 2)
- ? (u8)filter_type[dev_nr] : W9968CF_FILTER_TYPE;
-
- cam->capture = 1;
-
- cam->largeview = (largeview[dev_nr] == 0 || largeview[dev_nr] == 1)
- ? (u8)largeview[dev_nr] : W9968CF_LARGEVIEW;
-
- cam->decompression = (decompression[dev_nr] == 0 ||
- decompression[dev_nr] == 1 ||
- decompression[dev_nr] == 2)
- ? (u8)decompression[dev_nr]:W9968CF_DECOMPRESSION;
-
- cam->upscaling = (upscaling[dev_nr] == 0 ||
- upscaling[dev_nr] == 1)
- ? (u8)upscaling[dev_nr] : W9968CF_UPSCALING;
-
- cam->auto_brt = (autobright[dev_nr] == 0 || autobright[dev_nr] == 1)
- ? (u8)autobright[dev_nr] : W9968CF_AUTOBRIGHT;
-
- cam->auto_exp = (autoexp[dev_nr] == 0 || autoexp[dev_nr] == 1)
- ? (u8)autoexp[dev_nr] : W9968CF_AUTOEXP;
-
- cam->lightfreq = (lightfreq[dev_nr] == 50 || lightfreq[dev_nr] == 60)
- ? (u8)lightfreq[dev_nr] : W9968CF_LIGHTFREQ;
-
- cam->bandfilt = (bandingfilter[dev_nr] == 0 ||
- bandingfilter[dev_nr] == 1)
- ? (u8)bandingfilter[dev_nr] : W9968CF_BANDINGFILTER;
-
- cam->backlight = (backlight[dev_nr] == 0 || backlight[dev_nr] == 1)
- ? (u8)backlight[dev_nr] : W9968CF_BACKLIGHT;
-
- cam->clockdiv = (clockdiv[dev_nr] == -1 || clockdiv[dev_nr] >= 0)
- ? (s8)clockdiv[dev_nr] : W9968CF_CLOCKDIV;
-
- cam->mirror = (mirror[dev_nr] == 0 || mirror[dev_nr] == 1)
- ? (u8)mirror[dev_nr] : W9968CF_MIRROR;
-
- cam->monochrome = (monochrome[dev_nr] == 0 || monochrome[dev_nr] == 1)
- ? monochrome[dev_nr] : W9968CF_MONOCHROME;
-
- cam->picture.brightness = (u16)brightness[dev_nr];
- cam->picture.hue = (u16)hue[dev_nr];
- cam->picture.colour = (u16)colour[dev_nr];
- cam->picture.contrast = (u16)contrast[dev_nr];
- cam->picture.whiteness = (u16)whiteness[dev_nr];
- if (w9968cf_valid_palette((u16)force_palette[dev_nr])) {
- cam->picture.palette = (u16)force_palette[dev_nr];
- cam->force_palette = 1;
- } else {
- cam->force_palette = 0;
- if (cam->decompression == 0)
- cam->picture.palette = W9968CF_PALETTE_DECOMP_OFF;
- else if (cam->decompression == 1)
- cam->picture.palette = W9968CF_PALETTE_DECOMP_FORCE;
- else
- cam->picture.palette = W9968CF_PALETTE_DECOMP_ON;
- }
- cam->picture.depth = w9968cf_valid_depth(cam->picture.palette);
-
- cam->force_rgb = (force_rgb[dev_nr] == 0 || force_rgb[dev_nr] == 1)
- ? (u8)force_rgb[dev_nr] : W9968CF_FORCE_RGB;
-
- cam->window.x = 0;
- cam->window.y = 0;
- cam->window.width = W9968CF_WIDTH;
- cam->window.height = W9968CF_HEIGHT;
- cam->window.chromakey = 0;
- cam->window.clipcount = 0;
- cam->window.flags = 0;
-
- DBG(3, "%s configured with settings #%u:",
- symbolic(camlist, cam->id), dev_nr)
-
- DBG(3, "- Data packet size for USB isochrnous transfer: %u bytes",
- wMaxPacketSize[cam->altsetting-1])
-
- DBG(3, "- Number of requested video frame buffers: %u",
- cam->max_buffers)
-
- if (cam->double_buffer)
- DBG(3, "- Hardware double buffering enabled")
- else
- DBG(3, "- Hardware double buffering disabled")
-
- if (cam->filter_type == 0)
- DBG(3, "- Video filtering disabled")
- else if (cam->filter_type == 1)
- DBG(3, "- Video filtering enabled: type 1-2-1")
- else if (cam->filter_type == 2)
- DBG(3, "- Video filtering enabled: type 2-3-6-3-2")
-
- if (cam->clamping)
- DBG(3, "- Video data clamping (CCIR-601 format) enabled")
- else
- DBG(3, "- Video data clamping (CCIR-601 format) disabled")
-
- if (cam->largeview)
- DBG(3, "- Large view enabled")
- else
- DBG(3, "- Large view disabled")
-
- if ((cam->decompression) == 0 && (!cam->force_palette))
- DBG(3, "- Decompression disabled")
- else if ((cam->decompression) == 1 && (!cam->force_palette))
- DBG(3, "- Decompression forced")
- else if ((cam->decompression) == 2 && (!cam->force_palette))
- DBG(3, "- Decompression allowed")
-
- if (cam->upscaling)
- DBG(3, "- Software image scaling enabled")
- else
- DBG(3, "- Software image scaling disabled")
-
- if (cam->force_palette)
- DBG(3, "- Image palette forced to %s",
- symbolic(v4l1_plist, cam->picture.palette))
-
- if (cam->force_rgb)
- DBG(3, "- RGB component ordering will be used instead of BGR")
-
- if (cam->auto_brt)
- DBG(3, "- Auto brightness enabled")
- else
- DBG(3, "- Auto brightness disabled")
-
- if (cam->auto_exp)
- DBG(3, "- Auto exposure enabled")
- else
- DBG(3, "- Auto exposure disabled")
-
- if (cam->backlight)
- DBG(3, "- Backlight exposure algorithm enabled")
- else
- DBG(3, "- Backlight exposure algorithm disabled")
-
- if (cam->mirror)
- DBG(3, "- Mirror enabled")
- else
- DBG(3, "- Mirror disabled")
-
- if (cam->bandfilt)
- DBG(3, "- Banding filter enabled")
- else
- DBG(3, "- Banding filter disabled")
-
- DBG(3, "- Power lighting frequency: %u", cam->lightfreq)
-
- if (cam->clockdiv == -1)
- DBG(3, "- Automatic clock divisor enabled")
- else
- DBG(3, "- Clock divisor: %d", cam->clockdiv)
-
- if (cam->monochrome)
- DBG(3, "- Image sensor used as monochrome")
- else
- DBG(3, "- Image sensor not used as monochrome")
-}
-
-
-/*--------------------------------------------------------------------------
- If the video post-processing module is not loaded, some parameters
- must be overridden.
- --------------------------------------------------------------------------*/
-static void w9968cf_adjust_configuration(struct w9968cf_device* cam)
-{
- if (!w9968cf_vpp) {
- if (cam->decompression == 1) {
- cam->decompression = 2;
- DBG(2, "Video post-processing module not found: "
- "'decompression' parameter forced to 2")
- }
- if (cam->upscaling) {
- cam->upscaling = 0;
- DBG(2, "Video post-processing module not found: "
- "'upscaling' parameter forced to 0")
- }
- if (cam->picture.palette != VIDEO_PALETTE_UYVY) {
- cam->force_palette = 0;
- DBG(2, "Video post-processing module not found: "
- "'force_palette' parameter forced to 0")
- }
- cam->picture.palette = VIDEO_PALETTE_UYVY;
- cam->picture.depth = w9968cf_valid_depth(cam->picture.palette);
- }
-}
-
-
-/*--------------------------------------------------------------------------
- Release the resources used by the driver.
- This function is called on disconnect
- (or on close if deallocation has been deferred)
- --------------------------------------------------------------------------*/
-static void w9968cf_release_resources(struct w9968cf_device* cam)
-{
- mutex_lock(&w9968cf_devlist_mutex);
-
- DBG(2, "V4L device deregistered: %s",
- video_device_node_name(cam->v4ldev))
-
- video_unregister_device(cam->v4ldev);
- list_del(&cam->v4llist);
- i2c_del_adapter(&cam->i2c_adapter);
- w9968cf_deallocate_memory(cam);
- kfree(cam->control_buffer);
- kfree(cam->data_buffer);
- v4l2_device_unregister(&cam->v4l2_dev);
-
- mutex_unlock(&w9968cf_devlist_mutex);
-}
-
-
-
-/****************************************************************************
- * Video4Linux interface *
- ****************************************************************************/
-
-static int w9968cf_open(struct file *filp)
-{
- struct w9968cf_device* cam;
- int err;
-
- /* This the only safe way to prevent race conditions with disconnect */
- if (!down_read_trylock(&w9968cf_disconnect))
- return -EAGAIN;
-
- cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
-
- mutex_lock(&cam->dev_mutex);
-
- if (cam->sensor == CC_UNKNOWN) {
- DBG(2, "No supported image sensor has been detected by the "
- "'ovcamchip' module for the %s (%s). Make sure "
- "it is loaded *before* (re)connecting the camera.",
- symbolic(camlist, cam->id),
- video_device_node_name(cam->v4ldev))
- mutex_unlock(&cam->dev_mutex);
- up_read(&w9968cf_disconnect);
- return -ENODEV;
- }
-
- if (cam->users) {
- DBG(2, "%s (%s) has been already occupied by '%s'",
- symbolic(camlist, cam->id),
- video_device_node_name(cam->v4ldev), cam->command)
- if ((filp->f_flags & O_NONBLOCK)||(filp->f_flags & O_NDELAY)) {
- mutex_unlock(&cam->dev_mutex);
- up_read(&w9968cf_disconnect);
- return -EWOULDBLOCK;
- }
- mutex_unlock(&cam->dev_mutex);
- err = wait_event_interruptible_exclusive(cam->open,
- cam->disconnected ||
- !cam->users);
- if (err) {
- up_read(&w9968cf_disconnect);
- return err;
- }
- if (cam->disconnected) {
- up_read(&w9968cf_disconnect);
- return -ENODEV;
- }
- mutex_lock(&cam->dev_mutex);
- }
-
- DBG(5, "Opening '%s', %s ...",
- symbolic(camlist, cam->id), video_device_node_name(cam->v4ldev))
-
- cam->streaming = 0;
- cam->misconfigured = 0;
-
- w9968cf_adjust_configuration(cam);
-
- if ((err = w9968cf_allocate_memory(cam)))
- goto deallocate_memory;
-
- if ((err = w9968cf_init_chip(cam)))
- goto deallocate_memory;
-
- if ((err = w9968cf_start_transfer(cam)))
- goto deallocate_memory;
-
- filp->private_data = cam;
-
- cam->users++;
- strcpy(cam->command, current->comm);
-
- init_waitqueue_head(&cam->wait_queue);
-
- DBG(5, "Video device is open")
-
- mutex_unlock(&cam->dev_mutex);
- up_read(&w9968cf_disconnect);
-
- return 0;
-
-deallocate_memory:
- w9968cf_deallocate_memory(cam);
- DBG(2, "Failed to open the video device")
- mutex_unlock(&cam->dev_mutex);
- up_read(&w9968cf_disconnect);
- return err;
-}
-
-
-static int w9968cf_release(struct file *filp)
-{
- struct w9968cf_device* cam;
-
- cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
-
- mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */
-
- w9968cf_stop_transfer(cam);
-
- if (cam->disconnected) {
- w9968cf_release_resources(cam);
- mutex_unlock(&cam->dev_mutex);
- kfree(cam);
- return 0;
- }
-
- cam->users--;
- w9968cf_deallocate_memory(cam);
- wake_up_interruptible_nr(&cam->open, 1);
-
- DBG(5, "Video device closed")
- mutex_unlock(&cam->dev_mutex);
- return 0;
-}
-
-
-static ssize_t
-w9968cf_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
-{
- struct w9968cf_device* cam;
- struct w9968cf_frame_t* fr;
- int err = 0;
-
- cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
-
- if (filp->f_flags & O_NONBLOCK)
- return -EWOULDBLOCK;
-
- if (mutex_lock_interruptible(&cam->fileop_mutex))
- return -ERESTARTSYS;
-
- if (cam->disconnected) {
- DBG(2, "Device not present")
- mutex_unlock(&cam->fileop_mutex);
- return -ENODEV;
- }
-
- if (cam->misconfigured) {
- DBG(2, "The camera is misconfigured. Close and open it again.")
- mutex_unlock(&cam->fileop_mutex);
- return -EIO;
- }
-
- if (!cam->frame[0].queued)
- w9968cf_push_frame(cam, 0);
-
- if (!cam->frame[1].queued)
- w9968cf_push_frame(cam, 1);
-
- err = wait_event_interruptible(cam->wait_queue,
- cam->frame[0].status == F_READY ||
- cam->frame[1].status == F_READY ||
- cam->disconnected);
- if (err) {
- mutex_unlock(&cam->fileop_mutex);
- return err;
- }
- if (cam->disconnected) {
- mutex_unlock(&cam->fileop_mutex);
- return -ENODEV;
- }
-
- fr = (cam->frame[0].status == F_READY) ? &cam->frame[0]:&cam->frame[1];
-
- if (w9968cf_vpp)
- w9968cf_postprocess_frame(cam, fr);
-
- if (count > fr->length)
- count = fr->length;
-
- if (copy_to_user(buf, fr->buffer, count)) {
- fr->status = F_UNUSED;
- mutex_unlock(&cam->fileop_mutex);
- return -EFAULT;
- }
- *f_pos += count;
-
- fr->status = F_UNUSED;
-
- DBG(5, "%zu bytes read", count)
-
- mutex_unlock(&cam->fileop_mutex);
- return count;
-}
-
-
-static int w9968cf_mmap(struct file* filp, struct vm_area_struct *vma)
-{
- struct w9968cf_device* cam = (struct w9968cf_device*)
- video_get_drvdata(video_devdata(filp));
- unsigned long vsize = vma->vm_end - vma->vm_start,
- psize = cam->nbuffers * cam->frame[0].size,
- start = vma->vm_start,
- pos = (unsigned long)cam->frame[0].buffer,
- page;
-
- if (cam->disconnected) {
- DBG(2, "Device not present")
- return -ENODEV;
- }
-
- if (cam->misconfigured) {
- DBG(2, "The camera is misconfigured. Close and open it again")
- return -EIO;
- }
-
- PDBGG("mmapping %lu bytes...", vsize)
-
- if (vsize > psize - (vma->vm_pgoff << PAGE_SHIFT))
- return -EINVAL;
-
- while (vsize > 0) {
- page = vmalloc_to_pfn((void *)pos);
- if (remap_pfn_range(vma, start, page + vma->vm_pgoff,
- PAGE_SIZE, vma->vm_page_prot))
- return -EAGAIN;
- start += PAGE_SIZE;
- pos += PAGE_SIZE;
- vsize -= PAGE_SIZE;
- }
-
- DBG(5, "mmap method successfully called")
- return 0;
-}
-
-
-static long
-w9968cf_ioctl(struct file *filp,
- unsigned int cmd, unsigned long arg)
-{
- struct w9968cf_device* cam;
- long err;
-
- cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
-
- if (mutex_lock_interruptible(&cam->fileop_mutex))
- return -ERESTARTSYS;
-
- if (cam->disconnected) {
- DBG(2, "Device not present")
- mutex_unlock(&cam->fileop_mutex);
- return -ENODEV;
- }
-
- if (cam->misconfigured) {
- DBG(2, "The camera is misconfigured. Close and open it again.")
- mutex_unlock(&cam->fileop_mutex);
- return -EIO;
- }
-
- err = w9968cf_v4l_ioctl(filp, cmd, (void __user *)arg);
-
- mutex_unlock(&cam->fileop_mutex);
- return err;
-}
-
-
-static long w9968cf_v4l_ioctl(struct file *filp,
- unsigned int cmd, void __user *arg)
-{
- struct w9968cf_device* cam;
- const char* v4l1_ioctls[] = {
- "?", "CGAP", "GCHAN", "SCHAN", "GTUNER", "STUNER",
- "GPICT", "SPICT", "CCAPTURE", "GWIN", "SWIN", "GFBUF",
- "SFBUF", "KEY", "GFREQ", "SFREQ", "GAUDIO", "SAUDIO",
- "SYNC", "MCAPTURE", "GMBUF", "GUNIT", "GCAPTURE", "SCAPTURE",
- "SPLAYMODE", "SWRITEMODE", "GPLAYINFO", "SMICROCODE",
- "GVBIFMT", "SVBIFMT"
- };
-
- #define V4L1_IOCTL(cmd) \
- ((_IOC_NR((cmd)) < ARRAY_SIZE(v4l1_ioctls)) ? \
- v4l1_ioctls[_IOC_NR((cmd))] : "?")
-
- cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
-
- switch (cmd) {
-
- case VIDIOCGCAP: /* get video capability */
- {
- struct video_capability cap = {
- .type = VID_TYPE_CAPTURE | VID_TYPE_SCALES,
- .channels = 1,
- .audios = 0,
- .minwidth = cam->minwidth,
- .minheight = cam->minheight,
- };
- sprintf(cap.name, "W996[87]CF USB Camera");
- cap.maxwidth = (cam->upscaling && w9968cf_vpp)
- ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
- : cam->maxwidth;
- cap.maxheight = (cam->upscaling && w9968cf_vpp)
- ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
- : cam->maxheight;
-
- if (copy_to_user(arg, &cap, sizeof(cap)))
- return -EFAULT;
-
- DBG(5, "VIDIOCGCAP successfully called")
- return 0;
- }
-
- case VIDIOCGCHAN: /* get video channel informations */
- {
- struct video_channel chan;
- if (copy_from_user(&chan, arg, sizeof(chan)))
- return -EFAULT;
-
- if (chan.channel != 0)
- return -EINVAL;
-
- strcpy(chan.name, "Camera");
- chan.tuners = 0;
- chan.flags = 0;
- chan.type = VIDEO_TYPE_CAMERA;
- chan.norm = VIDEO_MODE_AUTO;
-
- if (copy_to_user(arg, &chan, sizeof(chan)))
- return -EFAULT;
-
- DBG(5, "VIDIOCGCHAN successfully called")
- return 0;
- }
-
- case VIDIOCSCHAN: /* set active channel */
- {
- struct video_channel chan;
-
- if (copy_from_user(&chan, arg, sizeof(chan)))
- return -EFAULT;
-
- if (chan.channel != 0)
- return -EINVAL;
-
- DBG(5, "VIDIOCSCHAN successfully called")
- return 0;
- }
-
- case VIDIOCGPICT: /* get image properties of the picture */
- {
- if (w9968cf_sensor_get_picture(cam))
- return -EIO;
-
- if (copy_to_user(arg, &cam->picture, sizeof(cam->picture)))
- return -EFAULT;
-
- DBG(5, "VIDIOCGPICT successfully called")
- return 0;
- }
-
- case VIDIOCSPICT: /* change picture settings */
- {
- struct video_picture pict;
- int err = 0;
-
- if (copy_from_user(&pict, arg, sizeof(pict)))
- return -EFAULT;
-
- if ( (cam->force_palette || !w9968cf_vpp)
- && pict.palette != cam->picture.palette ) {
- DBG(4, "Palette %s rejected: only %s is allowed",
- symbolic(v4l1_plist, pict.palette),
- symbolic(v4l1_plist, cam->picture.palette))
- return -EINVAL;
- }
-
- if (!w9968cf_valid_palette(pict.palette)) {
- DBG(4, "Palette %s not supported. VIDIOCSPICT failed",
- symbolic(v4l1_plist, pict.palette))
- return -EINVAL;
- }
-
- if (!cam->force_palette) {
- if (cam->decompression == 0) {
- if (w9968cf_need_decompression(pict.palette)) {
- DBG(4, "Decompression disabled: palette %s is not "
- "allowed. VIDIOCSPICT failed",
- symbolic(v4l1_plist, pict.palette))
- return -EINVAL;
- }
- } else if (cam->decompression == 1) {
- if (!w9968cf_need_decompression(pict.palette)) {
- DBG(4, "Decompression forced: palette %s is not "
- "allowed. VIDIOCSPICT failed",
- symbolic(v4l1_plist, pict.palette))
- return -EINVAL;
- }
- }
- }
-
- if (pict.depth != w9968cf_valid_depth(pict.palette)) {
- DBG(4, "Requested depth %u bpp is not valid for %s "
- "palette: ignored and changed to %u bpp",
- pict.depth, symbolic(v4l1_plist, pict.palette),
- w9968cf_valid_depth(pict.palette))
- pict.depth = w9968cf_valid_depth(pict.palette);
- }
-
- if (pict.palette != cam->picture.palette) {
- if(*cam->requested_frame
- || cam->frame_current->queued) {
- err = wait_event_interruptible
- ( cam->wait_queue,
- cam->disconnected ||
- (!*cam->requested_frame &&
- !cam->frame_current->queued) );
- if (err)
- return err;
- if (cam->disconnected)
- return -ENODEV;
- }
-
- if (w9968cf_stop_transfer(cam))
- goto ioctl_fail;
-
- if (w9968cf_set_picture(cam, pict))
- goto ioctl_fail;
-
- if (w9968cf_start_transfer(cam))
- goto ioctl_fail;
-
- } else if (w9968cf_sensor_update_picture(cam, pict))
- return -EIO;
-
-
- DBG(5, "VIDIOCSPICT successfully called")
- return 0;
- }
-
- case VIDIOCSWIN: /* set capture area */
- {
- struct video_window win;
- int err = 0;
-
- if (copy_from_user(&win, arg, sizeof(win)))
- return -EFAULT;
-
- DBG(6, "VIDIOCSWIN called: clipcount=%d, flags=%u, "
- "x=%u, y=%u, %ux%u", win.clipcount, win.flags,
- win.x, win.y, win.width, win.height)
-
- if (win.clipcount != 0 || win.flags != 0)
- return -EINVAL;
-
- if ((err = w9968cf_adjust_window_size(cam, &win.width,
- &win.height))) {
- DBG(4, "Resolution not supported (%ux%u). "
- "VIDIOCSWIN failed", win.width, win.height)
- return err;
- }
-
- if (win.x != cam->window.x ||
- win.y != cam->window.y ||
- win.width != cam->window.width ||
- win.height != cam->window.height) {
- if(*cam->requested_frame
- || cam->frame_current->queued) {
- err = wait_event_interruptible
- ( cam->wait_queue,
- cam->disconnected ||
- (!*cam->requested_frame &&
- !cam->frame_current->queued) );
- if (err)
- return err;
- if (cam->disconnected)
- return -ENODEV;
- }
-
- if (w9968cf_stop_transfer(cam))
- goto ioctl_fail;
-
- /* This _must_ be called before set_window() */
- if (w9968cf_set_picture(cam, cam->picture))
- goto ioctl_fail;
-
- if (w9968cf_set_window(cam, win))
- goto ioctl_fail;
-
- if (w9968cf_start_transfer(cam))
- goto ioctl_fail;
- }
-
- DBG(5, "VIDIOCSWIN successfully called. ")
- return 0;
- }
-
- case VIDIOCGWIN: /* get current window properties */
- {
- if (copy_to_user(arg,&cam->window,sizeof(struct video_window)))
- return -EFAULT;
-
- DBG(5, "VIDIOCGWIN successfully called")
- return 0;
- }
-
- case VIDIOCGMBUF: /* request for memory (mapped) buffer */
- {
- struct video_mbuf mbuf;
- u8 i;
-
- mbuf.size = cam->nbuffers * cam->frame[0].size;
- mbuf.frames = cam->nbuffers;
- for (i = 0; i < cam->nbuffers; i++)
- mbuf.offsets[i] = (unsigned long)cam->frame[i].buffer -
- (unsigned long)cam->frame[0].buffer;
-
- if (copy_to_user(arg, &mbuf, sizeof(mbuf)))
- return -EFAULT;
-
- DBG(5, "VIDIOCGMBUF successfully called")
- return 0;
- }
-
- case VIDIOCMCAPTURE: /* start the capture to a frame */
- {
- struct video_mmap mmap;
- struct w9968cf_frame_t* fr;
- u32 w, h;
- int err = 0;
-
- if (copy_from_user(&mmap, arg, sizeof(mmap)))
- return -EFAULT;
-
- DBG(6, "VIDIOCMCAPTURE called: frame #%u, format=%s, %dx%d",
- mmap.frame, symbolic(v4l1_plist, mmap.format),
- mmap.width, mmap.height)
-
- if (mmap.frame >= cam->nbuffers) {
- DBG(4, "Invalid frame number (%u). "
- "VIDIOCMCAPTURE failed", mmap.frame)
- return -EINVAL;
- }
-
- if (mmap.format!=cam->picture.palette &&
- (cam->force_palette || !w9968cf_vpp)) {
- DBG(4, "Palette %s rejected: only %s is allowed",
- symbolic(v4l1_plist, mmap.format),
- symbolic(v4l1_plist, cam->picture.palette))
- return -EINVAL;
- }
-
- if (!w9968cf_valid_palette(mmap.format)) {
- DBG(4, "Palette %s not supported. "
- "VIDIOCMCAPTURE failed",
- symbolic(v4l1_plist, mmap.format))
- return -EINVAL;
- }
-
- if (!cam->force_palette) {
- if (cam->decompression == 0) {
- if (w9968cf_need_decompression(mmap.format)) {
- DBG(4, "Decompression disabled: palette %s is not "
- "allowed. VIDIOCSPICT failed",
- symbolic(v4l1_plist, mmap.format))
- return -EINVAL;
- }
- } else if (cam->decompression == 1) {
- if (!w9968cf_need_decompression(mmap.format)) {
- DBG(4, "Decompression forced: palette %s is not "
- "allowed. VIDIOCSPICT failed",
- symbolic(v4l1_plist, mmap.format))
- return -EINVAL;
- }
- }
- }
-
- w = mmap.width; h = mmap.height;
- err = w9968cf_adjust_window_size(cam, &w, &h);
- mmap.width = w; mmap.height = h;
- if (err) {
- DBG(4, "Resolution not supported (%dx%d). "
- "VIDIOCMCAPTURE failed",
- mmap.width, mmap.height)
- return err;
- }
-
- fr = &cam->frame[mmap.frame];
-
- if (mmap.width != cam->window.width ||
- mmap.height != cam->window.height ||
- mmap.format != cam->picture.palette) {
-
- struct video_window win;
- struct video_picture pict;
-
- if(*cam->requested_frame
- || cam->frame_current->queued) {
- DBG(6, "VIDIOCMCAPTURE. Change settings for "
- "frame #%u: %dx%d, format %s. Wait...",
- mmap.frame, mmap.width, mmap.height,
- symbolic(v4l1_plist, mmap.format))
- err = wait_event_interruptible
- ( cam->wait_queue,
- cam->disconnected ||
- (!*cam->requested_frame &&
- !cam->frame_current->queued) );
- if (err)
- return err;
- if (cam->disconnected)
- return -ENODEV;
- }
-
- memcpy(&win, &cam->window, sizeof(win));
- memcpy(&pict, &cam->picture, sizeof(pict));
- win.width = mmap.width;
- win.height = mmap.height;
- pict.palette = mmap.format;
-
- if (w9968cf_stop_transfer(cam))
- goto ioctl_fail;
-
- /* This before set_window */
- if (w9968cf_set_picture(cam, pict))
- goto ioctl_fail;
-
- if (w9968cf_set_window(cam, win))
- goto ioctl_fail;
-
- if (w9968cf_start_transfer(cam))
- goto ioctl_fail;
-
- } else if (fr->queued) {
-
- DBG(6, "Wait until frame #%u is free", mmap.frame)
-
- err = wait_event_interruptible(cam->wait_queue,
- cam->disconnected ||
- (!fr->queued));
- if (err)
- return err;
- if (cam->disconnected)
- return -ENODEV;
- }
-
- w9968cf_push_frame(cam, mmap.frame);
- DBG(5, "VIDIOCMCAPTURE(%u): successfully called", mmap.frame)
- return 0;
- }
-
- case VIDIOCSYNC: /* wait until the capture of a frame is finished */
- {
- unsigned int f_num;
- struct w9968cf_frame_t* fr;
- int err = 0;
-
- if (copy_from_user(&f_num, arg, sizeof(f_num)))
- return -EFAULT;
-
- if (f_num >= cam->nbuffers) {
- DBG(4, "Invalid frame number (%u). "
- "VIDIOCMCAPTURE failed", f_num)
- return -EINVAL;
- }
-
- DBG(6, "VIDIOCSYNC called for frame #%u", f_num)
-
- fr = &cam->frame[f_num];
-
- switch (fr->status) {
- case F_UNUSED:
- if (!fr->queued) {
- DBG(4, "VIDIOSYNC: Frame #%u not requested!",
- f_num)
- return -EFAULT;
- }
- case F_ERROR:
- case F_GRABBING:
- err = wait_event_interruptible(cam->wait_queue,
- (fr->status == F_READY)
- || cam->disconnected);
- if (err)
- return err;
- if (cam->disconnected)
- return -ENODEV;
- break;
- case F_READY:
- break;
- }
-
- if (w9968cf_vpp)
- w9968cf_postprocess_frame(cam, fr);
-
- fr->status = F_UNUSED;
-
- DBG(5, "VIDIOCSYNC(%u) successfully called", f_num)
- return 0;
- }
-
- case VIDIOCGUNIT:/* report the unit numbers of the associated devices*/
- {
- struct video_unit unit = {
- .video = cam->v4ldev->minor,
- .vbi = VIDEO_NO_UNIT,
- .radio = VIDEO_NO_UNIT,
- .audio = VIDEO_NO_UNIT,
- .teletext = VIDEO_NO_UNIT,
- };
-
- if (copy_to_user(arg, &unit, sizeof(unit)))
- return -EFAULT;
-
- DBG(5, "VIDIOCGUNIT successfully called")
- return 0;
- }
-
- case VIDIOCKEY:
- return 0;
-
- case VIDIOCGFBUF:
- {
- if (clear_user(arg, sizeof(struct video_buffer)))
- return -EFAULT;
-
- DBG(5, "VIDIOCGFBUF successfully called")
- return 0;
- }
-
- case VIDIOCGTUNER:
- {
- struct video_tuner tuner;
- if (copy_from_user(&tuner, arg, sizeof(tuner)))
- return -EFAULT;
-
- if (tuner.tuner != 0)
- return -EINVAL;
-
- strcpy(tuner.name, "no_tuner");
- tuner.rangelow = 0;
- tuner.rangehigh = 0;
- tuner.flags = VIDEO_TUNER_NORM;
- tuner.mode = VIDEO_MODE_AUTO;
- tuner.signal = 0xffff;
-
- if (copy_to_user(arg, &tuner, sizeof(tuner)))
- return -EFAULT;
-
- DBG(5, "VIDIOCGTUNER successfully called")
- return 0;
- }
-
- case VIDIOCSTUNER:
- {
- struct video_tuner tuner;
- if (copy_from_user(&tuner, arg, sizeof(tuner)))
- return -EFAULT;
-
- if (tuner.tuner != 0)
- return -EINVAL;
-
- if (tuner.mode != VIDEO_MODE_AUTO)
- return -EINVAL;
-
- DBG(5, "VIDIOCSTUNER successfully called")
- return 0;
- }
-
- case VIDIOCSFBUF:
- case VIDIOCCAPTURE:
- case VIDIOCGFREQ:
- case VIDIOCSFREQ:
- case VIDIOCGAUDIO:
- case VIDIOCSAUDIO:
- case VIDIOCSPLAYMODE:
- case VIDIOCSWRITEMODE:
- case VIDIOCGPLAYINFO:
- case VIDIOCSMICROCODE:
- case VIDIOCGVBIFMT:
- case VIDIOCSVBIFMT:
- DBG(4, "Unsupported V4L1 IOCtl: VIDIOC%s "
- "(type 0x%01X, "
- "n. 0x%01X, "
- "dir. 0x%01X, "
- "size 0x%02X)",
- V4L1_IOCTL(cmd),
- _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd))
-
- return -EINVAL;
-
- default:
- DBG(4, "Invalid V4L1 IOCtl: VIDIOC%s "
- "type 0x%01X, "
- "n. 0x%01X, "
- "dir. 0x%01X, "
- "size 0x%02X",
- V4L1_IOCTL(cmd),
- _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd))
-
- return -ENOIOCTLCMD;
-
- } /* end of switch */
-
-ioctl_fail:
- cam->misconfigured = 1;
- DBG(1, "VIDIOC%s failed because of hardware problems. "
- "To use the camera, close and open it again.", V4L1_IOCTL(cmd))
- return -EFAULT;
-}
-
-
-static const struct v4l2_file_operations w9968cf_fops = {
- .owner = THIS_MODULE,
- .open = w9968cf_open,
- .release = w9968cf_release,
- .read = w9968cf_read,
- .ioctl = w9968cf_ioctl,
- .mmap = w9968cf_mmap,
-};
-
-
-
-/****************************************************************************
- * USB probe and V4L registration, disconnect and id_table[] definition *
- ****************************************************************************/
-
-static int
-w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
-{
- struct usb_device *udev = interface_to_usbdev(intf);
- struct w9968cf_device* cam;
- int err = 0;
- enum w9968cf_model_id mod_id;
- struct list_head* ptr;
- u8 sc = 0; /* number of simultaneous cameras */
- static unsigned short dev_nr; /* 0 - we are handling device number n */
- static unsigned short addrs[] = {
- OV7xx0_SID,
- OV6xx0_SID,
- I2C_CLIENT_END
- };
-
- if (le16_to_cpu(udev->descriptor.idVendor) == winbond_id_table[0].idVendor &&
- le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[0].idProduct)
- mod_id = W9968CF_MOD_CLVBWGP; /* see camlist[] table */
- else if (le16_to_cpu(udev->descriptor.idVendor) == winbond_id_table[1].idVendor &&
- le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[1].idProduct)
- mod_id = W9968CF_MOD_GENERIC; /* see camlist[] table */
- else
- return -ENODEV;
-
- cam = (struct w9968cf_device*)
- kzalloc(sizeof(struct w9968cf_device), GFP_KERNEL);
- if (!cam)
- return -ENOMEM;
-
- err = v4l2_device_register(&intf->dev, &cam->v4l2_dev);
- if (err)
- goto fail0;
-
- mutex_init(&cam->dev_mutex);
- mutex_lock(&cam->dev_mutex);
-
- cam->usbdev = udev;
-
- DBG(2, "%s detected", symbolic(camlist, mod_id))
-
- if (simcams > W9968CF_MAX_DEVICES)
- simcams = W9968CF_SIMCAMS;
-
- /* How many cameras are connected ? */
- mutex_lock(&w9968cf_devlist_mutex);
- list_for_each(ptr, &w9968cf_dev_list)
- sc++;
- mutex_unlock(&w9968cf_devlist_mutex);
-
- if (sc >= simcams) {
- DBG(2, "Device rejected: too many connected cameras "
- "(max. %u)", simcams)
- err = -EPERM;
- goto fail;
- }
-
-
- /* Allocate 2 bytes of memory for camera control USB transfers */
- if (!(cam->control_buffer = kzalloc(2, GFP_KERNEL))) {
- DBG(1,"Couldn't allocate memory for camera control transfers")
- err = -ENOMEM;
- goto fail;
- }
-
- /* Allocate 8 bytes of memory for USB data transfers to the FSB */
- if (!(cam->data_buffer = kzalloc(8, GFP_KERNEL))) {
- DBG(1, "Couldn't allocate memory for data "
- "transfers to the FSB")
- err = -ENOMEM;
- goto fail;
- }
-
- /* Register the V4L device */
- cam->v4ldev = video_device_alloc();
- if (!cam->v4ldev) {
- DBG(1, "Could not allocate memory for a V4L structure")
- err = -ENOMEM;
- goto fail;
- }
-
- strcpy(cam->v4ldev->name, symbolic(camlist, mod_id));
- cam->v4ldev->fops = &w9968cf_fops;
- cam->v4ldev->release = video_device_release;
- video_set_drvdata(cam->v4ldev, cam);
- cam->v4ldev->v4l2_dev = &cam->v4l2_dev;
-
- err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
- video_nr[dev_nr]);
- if (err) {
- DBG(1, "V4L device registration failed")
- if (err == -ENFILE && video_nr[dev_nr] == -1)
- DBG(2, "Couldn't find a free /dev/videoX node")
- video_nr[dev_nr] = -1;
- dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0;
- goto fail;
- }
-
- DBG(2, "V4L device registered as %s",
- video_device_node_name(cam->v4ldev))
-
- /* Set some basic constants */
- w9968cf_configure_camera(cam, udev, mod_id, dev_nr);
-
- /* Add a new entry into the list of V4L registered devices */
- mutex_lock(&w9968cf_devlist_mutex);
- list_add(&cam->v4llist, &w9968cf_dev_list);
- mutex_unlock(&w9968cf_devlist_mutex);
- dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0;
-
- w9968cf_turn_on_led(cam);
-
- w9968cf_i2c_init(cam);
- cam->sensor_sd = v4l2_i2c_new_subdev(&cam->v4l2_dev,
- &cam->i2c_adapter,
- "ovcamchip", "ovcamchip", 0, addrs);
-
- usb_set_intfdata(intf, cam);
- mutex_unlock(&cam->dev_mutex);
-
- err = w9968cf_sensor_init(cam);
- return 0;
-
-fail: /* Free unused memory */
- kfree(cam->control_buffer);
- kfree(cam->data_buffer);
- if (cam->v4ldev)
- video_device_release(cam->v4ldev);
- mutex_unlock(&cam->dev_mutex);
- v4l2_device_unregister(&cam->v4l2_dev);
-fail0:
- kfree(cam);
- return err;
-}
-
-
-static void w9968cf_usb_disconnect(struct usb_interface* intf)
-{
- struct w9968cf_device* cam =
- (struct w9968cf_device*)usb_get_intfdata(intf);
-
- if (cam) {
- down_write(&w9968cf_disconnect);
- /* Prevent concurrent accesses to data */
- mutex_lock(&cam->dev_mutex);
-
- cam->disconnected = 1;
-
- DBG(2, "Disconnecting %s...", symbolic(camlist, cam->id));
-
- v4l2_device_disconnect(&cam->v4l2_dev);
-
- wake_up_interruptible_all(&cam->open);
-
- if (cam->users) {
- DBG(2, "The device is open (%s)! "
- "Process name: %s. Deregistration and memory "
- "deallocation are deferred on close.",
- video_device_node_name(cam->v4ldev), cam->command)
- cam->misconfigured = 1;
- w9968cf_stop_transfer(cam);
- wake_up_interruptible(&cam->wait_queue);
- } else
- w9968cf_release_resources(cam);
-
- mutex_unlock(&cam->dev_mutex);
- up_write(&w9968cf_disconnect);
-
- if (!cam->users) {
- kfree(cam);
- }
- }
-}
-
-
-static struct usb_driver w9968cf_usb_driver = {
- .name = "w9968cf",
- .id_table = winbond_id_table,
- .probe = w9968cf_usb_probe,
- .disconnect = w9968cf_usb_disconnect,
-};
-
-
-
-/****************************************************************************
- * Module init, exit and intermodule communication *
- ****************************************************************************/
-
-static int __init w9968cf_module_init(void)
-{
- int err;
-
- KDBG(2, W9968CF_MODULE_NAME" "W9968CF_MODULE_VERSION)
- KDBG(3, W9968CF_MODULE_AUTHOR)
-
- if ((err = usb_register(&w9968cf_usb_driver)))
- return err;
-
- return 0;
-}
-
-
-static void __exit w9968cf_module_exit(void)
-{
- /* w9968cf_usb_disconnect() will be called */
- usb_deregister(&w9968cf_usb_driver);
-
- KDBG(2, W9968CF_MODULE_NAME" deregistered")
-}
-
-
-module_init(w9968cf_module_init);
-module_exit(w9968cf_module_exit);
-
diff --git a/drivers/media/video/w9968cf.h b/drivers/media/video/w9968cf.h
deleted file mode 100644
index 73ad864..0000000
--- a/drivers/media/video/w9968cf.h
+++ /dev/null
@@ -1,333 +0,0 @@
-/***************************************************************************
- * Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip. *
- * *
- * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the Free Software *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
- ***************************************************************************/
-
-#ifndef _W9968CF_H_
-#define _W9968CF_H_
-
-#include <linux/videodev2.h>
-#include <linux/usb.h>
-#include <linux/i2c.h>
-#include <linux/device.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/wait.h>
-#include <linux/param.h>
-#include <linux/types.h>
-#include <linux/rwsem.h>
-#include <linux/mutex.h>
-
-#include <media/v4l2-device.h>
-#include <media/ovcamchip.h>
-
-#include "w9968cf_vpp.h"
-
-
-/****************************************************************************
- * Default values *
- ****************************************************************************/
-
-#define W9968CF_VPPMOD_LOAD 1 /* automatic 'w9968cf-vpp' module loading */
-
-/* Comment/uncomment the following line to enable/disable debugging messages */
-#define W9968CF_DEBUG
-
-/* These have effect only if W9968CF_DEBUG is defined */
-#define W9968CF_DEBUG_LEVEL 2 /* from 0 to 6. 0 for no debug informations */
-#define W9968CF_SPECIFIC_DEBUG 0 /* 0 or 1 */
-
-#define W9968CF_MAX_DEVICES 32
-#define W9968CF_SIMCAMS W9968CF_MAX_DEVICES /* simultaneous cameras */
-
-#define W9968CF_MAX_BUFFERS 32
-#define W9968CF_BUFFERS 2 /* n. of frame buffers from 2 to MAX_BUFFERS */
-
-/* Maximum data payload sizes in bytes for alternate settings */
-static const u16 wMaxPacketSize[] = {1023, 959, 895, 831, 767, 703, 639, 575,
- 511, 447, 383, 319, 255, 191, 127, 63};
-#define W9968CF_PACKET_SIZE 1023 /* according to wMaxPacketSizes[] */
-#define W9968CF_MIN_PACKET_SIZE 63 /* minimum value */
-#define W9968CF_ISO_PACKETS 5 /* n.of packets for isochronous transfers */
-#define W9968CF_USB_CTRL_TIMEOUT 1000 /* timeout (ms) for usb control commands */
-#define W9968CF_URBS 2 /* n. of scheduled URBs for ISO transfer */
-
-#define W9968CF_I2C_BUS_DELAY 4 /* delay in us for I2C bit r/w operations */
-#define W9968CF_I2C_RW_RETRIES 15 /* number of max I2C r/w retries */
-
-/* Available video formats */
-struct w9968cf_format {
- const u16 palette;
- const u16 depth;
- const u8 compression;
-};
-
-static const struct w9968cf_format w9968cf_formatlist[] = {
- { VIDEO_PALETTE_UYVY, 16, 0 }, /* original video */
- { VIDEO_PALETTE_YUV422P, 16, 1 }, /* with JPEG compression */
- { VIDEO_PALETTE_YUV420P, 12, 1 }, /* with JPEG compression */
- { VIDEO_PALETTE_YUV420, 12, 1 }, /* same as YUV420P */
- { VIDEO_PALETTE_YUYV, 16, 0 }, /* software conversion */
- { VIDEO_PALETTE_YUV422, 16, 0 }, /* software conversion */
- { VIDEO_PALETTE_GREY, 8, 0 }, /* software conversion */
- { VIDEO_PALETTE_RGB555, 16, 0 }, /* software conversion */
- { VIDEO_PALETTE_RGB565, 16, 0 }, /* software conversion */
- { VIDEO_PALETTE_RGB24, 24, 0 }, /* software conversion */
- { VIDEO_PALETTE_RGB32, 32, 0 }, /* software conversion */
- { 0, 0, 0 } /* 0 is a terminating entry */
-};
-
-#define W9968CF_DECOMPRESSION 2 /* decomp:0=disable,1=force,2=any formats */
-#define W9968CF_PALETTE_DECOMP_OFF VIDEO_PALETTE_UYVY /* when decomp=0 */
-#define W9968CF_PALETTE_DECOMP_FORCE VIDEO_PALETTE_YUV420P /* when decomp=1 */
-#define W9968CF_PALETTE_DECOMP_ON VIDEO_PALETTE_UYVY /* when decomp=2 */
-
-#define W9968CF_FORCE_RGB 0 /* read RGB instead of BGR, yes=1/no=0 */
-
-#define W9968CF_MAX_WIDTH 800 /* Has effect if up-scaling is on */
-#define W9968CF_MAX_HEIGHT 600 /* Has effect if up-scaling is on */
-#define W9968CF_WIDTH 320 /* from 128 to 352, multiple of 16 */
-#define W9968CF_HEIGHT 240 /* from 96 to 288, multiple of 16 */
-
-#define W9968CF_CLAMPING 0 /* 0 disable, 1 enable video data clamping */
-#define W9968CF_FILTER_TYPE 0 /* 0 disable 1 (1-2-1), 2 (2-3-6-3-2) */
-#define W9968CF_DOUBLE_BUFFER 1 /* 0 disable, 1 enable double buffer */
-#define W9968CF_LARGEVIEW 1 /* 0 disable, 1 enable */
-#define W9968CF_UPSCALING 0 /* 0 disable, 1 enable */
-
-#define W9968CF_MONOCHROME 0 /* 0 not monochrome, 1 monochrome sensor */
-#define W9968CF_BRIGHTNESS 31000 /* from 0 to 65535 */
-#define W9968CF_HUE 32768 /* from 0 to 65535 */
-#define W9968CF_COLOUR 32768 /* from 0 to 65535 */
-#define W9968CF_CONTRAST 50000 /* from 0 to 65535 */
-#define W9968CF_WHITENESS 32768 /* from 0 to 65535 */
-
-#define W9968CF_AUTOBRIGHT 0 /* 0 disable, 1 enable automatic brightness */
-#define W9968CF_AUTOEXP 1 /* 0 disable, 1 enable automatic exposure */
-#define W9968CF_LIGHTFREQ 50 /* light frequency. 50Hz (Europe) or 60Hz */
-#define W9968CF_BANDINGFILTER 0 /* 0 disable, 1 enable banding filter */
-#define W9968CF_BACKLIGHT 0 /* 0 or 1, 1=object is lit from behind */
-#define W9968CF_MIRROR 0 /* 0 or 1 [don't] reverse image horizontally*/
-
-#define W9968CF_CLOCKDIV -1 /* -1 = automatic clock divisor */
-#define W9968CF_DEF_CLOCKDIVISOR 0 /* default sensor clock divisor value */
-
-
-/****************************************************************************
- * Globals *
- ****************************************************************************/
-
-#define W9968CF_MODULE_NAME "V4L driver for W996[87]CF JPEG USB " \
- "Dual Mode Camera Chip"
-#define W9968CF_MODULE_VERSION "1:1.34-basic"
-#define W9968CF_MODULE_AUTHOR "(C) 2002-2004 Luca Risolia"
-#define W9968CF_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
-#define W9968CF_MODULE_LICENSE "GPL"
-
-static const struct usb_device_id winbond_id_table[] = {
- {
- /* Creative Labs Video Blaster WebCam Go Plus */
- USB_DEVICE(0x041e, 0x4003),
- .driver_info = (unsigned long)"w9968cf",
- },
- {
- /* Generic W996[87]CF JPEG USB Dual Mode Camera */
- USB_DEVICE(0x1046, 0x9967),
- .driver_info = (unsigned long)"w9968cf",
- },
- { } /* terminating entry */
-};
-
-/* W996[87]CF camera models, internal ids: */
-enum w9968cf_model_id {
- W9968CF_MOD_GENERIC = 1, /* Generic W996[87]CF based device */
- W9968CF_MOD_CLVBWGP = 11,/*Creative Labs Video Blaster WebCam Go Plus*/
- W9968CF_MOD_ADPVDMA = 21, /* Aroma Digi Pen VGA Dual Mode ADG-5000 */
- W9986CF_MOD_AAU = 31, /* AVerMedia AVerTV USB */
- W9968CF_MOD_CLVBWG = 34, /* Creative Labs Video Blaster WebCam Go */
- W9968CF_MOD_LL = 37, /* Lebon LDC-035A */
- W9968CF_MOD_EEEMC = 40, /* Ezonics EZ-802 EZMega Cam */
- W9968CF_MOD_OOE = 42, /* OmniVision OV8610-EDE */
- W9968CF_MOD_ODPVDMPC = 43,/* OPCOM Digi Pen VGA Dual Mode Pen Camera */
- W9968CF_MOD_PDPII = 46, /* Pretec Digi Pen-II */
- W9968CF_MOD_PDP480 = 49, /* Pretec DigiPen-480 */
-};
-
-enum w9968cf_frame_status {
- F_READY, /* finished grabbing & ready to be read/synced */
- F_GRABBING, /* in the process of being grabbed into */
- F_ERROR, /* something bad happened while processing */
- F_UNUSED /* unused (no VIDIOCMCAPTURE) */
-};
-
-struct w9968cf_frame_t {
- void* buffer;
- unsigned long size;
- u32 length;
- int number;
- enum w9968cf_frame_status status;
- struct w9968cf_frame_t* next;
- u8 queued;
-};
-
-enum w9968cf_vpp_flag {
- VPP_NONE = 0x00,
- VPP_UPSCALE = 0x01,
- VPP_SWAP_YUV_BYTES = 0x02,
- VPP_DECOMPRESSION = 0x04,
- VPP_UYVY_TO_RGBX = 0x08,
-};
-
-/* Main device driver structure */
-struct w9968cf_device {
- enum w9968cf_model_id id; /* private device identifier */
-
- struct v4l2_device v4l2_dev;
- struct video_device* v4ldev; /* -> V4L structure */
- struct list_head v4llist; /* entry of the list of V4L cameras */
-
- struct usb_device* usbdev; /* -> main USB structure */
- struct urb* urb[W9968CF_URBS]; /* -> USB request block structs */
- void* transfer_buffer[W9968CF_URBS]; /* -> ISO transfer buffers */
- u16* control_buffer; /* -> buffer for control req.*/
- u16* data_buffer; /* -> data to send to the FSB */
-
- struct w9968cf_frame_t frame[W9968CF_MAX_BUFFERS];
- struct w9968cf_frame_t frame_tmp; /* temporary frame */
- struct w9968cf_frame_t frame_vpp; /* helper frame.*/
- struct w9968cf_frame_t* frame_current; /* -> frame being grabbed */
- struct w9968cf_frame_t* requested_frame[W9968CF_MAX_BUFFERS];
-
- u8 max_buffers, /* number of requested buffers */
- force_palette, /* yes=1/no=0 */
- force_rgb, /* read RGB instead of BGR, yes=1, no=0 */
- double_buffer, /* hardware double buffering yes=1/no=0 */
- clamping, /* video data clamping yes=1/no=0 */
- filter_type, /* 0=disabled, 1=3 tap, 2=5 tap filter */
- capture, /* 0=disabled, 1=enabled */
- largeview, /* 0=disabled, 1=enabled */
- decompression, /* 0=disabled, 1=forced, 2=allowed */
- upscaling; /* software image scaling, 0=enabled, 1=disabled */
-
- struct video_picture picture; /* current picture settings */
- struct video_window window; /* current window settings */
-
- u16 hw_depth, /* depth (used by the chip) */
- hw_palette, /* palette (used by the chip) */
- hw_width, /* width (used by the chip) */
- hw_height, /* height (used by the chip) */
- hs_polarity, /* 0=negative sync pulse, 1=positive sync pulse */
- vs_polarity, /* 0=negative sync pulse, 1=positive sync pulse */
- start_cropx, /* pixels from HS inactive edge to 1st cropped pixel*/
- start_cropy; /* pixels from VS inactive edge to 1st cropped pixel*/
-
- enum w9968cf_vpp_flag vpp_flag; /* post-processing routines in use */
-
- u8 nbuffers, /* number of allocated frame buffers */
- altsetting, /* camera alternate setting */
- disconnected, /* flag: yes=1, no=0 */
- misconfigured, /* flag: yes=1, no=0 */
- users, /* flag: number of users holding the device */
- streaming; /* flag: yes=1, no=0 */
-
- u8 sensor_initialized; /* flag: yes=1, no=0 */
-
- /* Determined by the image sensor type: */
- int sensor, /* type of image sensor chip (CC_*) */
- monochrome; /* image sensor is (probably) monochrome */
- u16 maxwidth, /* maximum width supported by the image sensor */
- maxheight, /* maximum height supported by the image sensor */
- minwidth, /* minimum width supported by the image sensor */
- minheight; /* minimum height supported by the image sensor */
- u8 auto_brt, /* auto brightness enabled flag */
- auto_exp, /* auto exposure enabled flag */
- backlight, /* backlight exposure algorithm flag */
- mirror, /* image is reversed horizontally */
- lightfreq, /* power (lighting) frequency */
- bandfilt; /* banding filter enabled flag */
- s8 clockdiv; /* clock divisor */
-
- /* I2C interface to kernel */
- struct i2c_adapter i2c_adapter;
- struct v4l2_subdev *sensor_sd;
-
- /* Locks */
- struct mutex dev_mutex, /* for probe, disconnect,open and close */
- fileop_mutex; /* for read and ioctl */
- spinlock_t urb_lock, /* for submit_urb() and unlink_urb() */
- flist_lock; /* for requested frame list accesses */
- wait_queue_head_t open, wait_queue;
-
- char command[16]; /* name of the program holding the device */
-};
-
-static inline struct w9968cf_device *to_cam(struct v4l2_device *v4l2_dev)
-{
- return container_of(v4l2_dev, struct w9968cf_device, v4l2_dev);
-}
-
-
-/****************************************************************************
- * Macros for debugging *
- ****************************************************************************/
-
-#undef DBG
-#undef KDBG
-#ifdef W9968CF_DEBUG
-/* For device specific debugging messages */
-# define DBG(level, fmt, args...) \
-{ \
- if ( ((specific_debug) && (debug == (level))) || \
- ((!specific_debug) && (debug >= (level))) ) { \
- if ((level) == 1) \
- v4l2_err(&cam->v4l2_dev, fmt "\n", ## args); \
- else if ((level) == 2 || (level) == 3) \
- v4l2_info(&cam->v4l2_dev, fmt "\n", ## args); \
- else if ((level) == 4) \
- v4l2_warn(&cam->v4l2_dev, fmt "\n", ## args); \
- else if ((level) >= 5) \
- v4l2_info(&cam->v4l2_dev, "[%s:%d] " fmt "\n", \
- __func__, __LINE__ , ## args); \
- } \
-}
-/* For generic kernel (not device specific) messages */
-# define KDBG(level, fmt, args...) \
-{ \
- if ( ((specific_debug) && (debug == (level))) || \
- ((!specific_debug) && (debug >= (level))) ) { \
- if ((level) >= 1 && (level) <= 4) \
- pr_info("w9968cf: " fmt "\n", ## args); \
- else if ((level) >= 5) \
- pr_debug("w9968cf: [%s:%d] " fmt "\n", __func__, \
- __LINE__ , ## args); \
- } \
-}
-#else
- /* Not debugging: nothing */
-# define DBG(level, fmt, args...) do {;} while(0);
-# define KDBG(level, fmt, args...) do {;} while(0);
-#endif
-
-#undef PDBG
-#define PDBG(fmt, args...) \
-v4l2_info(&cam->v4l2_dev, "[%s:%d] " fmt "\n", __func__, __LINE__ , ## args);
-
-#undef PDBGG
-#define PDBGG(fmt, args...) do {;} while(0); /* nothing: it's a placeholder */
-
-#endif /* _W9968CF_H_ */
diff --git a/drivers/media/video/w9968cf_decoder.h b/drivers/media/video/w9968cf_decoder.h
deleted file mode 100644
index 59decbf..0000000
--- a/drivers/media/video/w9968cf_decoder.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/***************************************************************************
- * Video decoder for the W996[87]CF driver for Linux. *
- * *
- * Copyright (C) 2003 2004 by Luca Risolia <luca.risolia@studio.unibo.it> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the Free Software *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
- ***************************************************************************/
-
-#ifndef _W9968CF_DECODER_H_
-#define _W9968CF_DECODER_H_
-
-/* Comment/uncomment this for high/low quality of compressed video */
-#define W9968CF_DEC_FAST_LOWQUALITY_VIDEO
-
-#ifdef W9968CF_DEC_FAST_LOWQUALITY_VIDEO
-static const unsigned char Y_QUANTABLE[64] = {
- 16, 11, 10, 16, 24, 40, 51, 61,
- 12, 12, 14, 19, 26, 58, 60, 55,
- 14, 13, 16, 24, 40, 57, 69, 56,
- 14, 17, 22, 29, 51, 87, 80, 62,
- 18, 22, 37, 56, 68, 109, 103, 77,
- 24, 35, 55, 64, 81, 104, 113, 92,
- 49, 64, 78, 87, 103, 121, 120, 101,
- 72, 92, 95, 98, 112, 100, 103, 99
-};
-
-static const unsigned char UV_QUANTABLE[64] = {
- 17, 18, 24, 47, 99, 99, 99, 99,
- 18, 21, 26, 66, 99, 99, 99, 99,
- 24, 26, 56, 99, 99, 99, 99, 99,
- 47, 66, 99, 99, 99, 99, 99, 99,
- 99, 99, 99, 99, 99, 99, 99, 99,
- 99, 99, 99, 99, 99, 99, 99, 99,
- 99, 99, 99, 99, 99, 99, 99, 99,
- 99, 99, 99, 99, 99, 99, 99, 99
-};
-#else
-static const unsigned char Y_QUANTABLE[64] = {
- 8, 5, 5, 8, 12, 20, 25, 30,
- 6, 6, 7, 9, 13, 29, 30, 27,
- 7, 6, 8, 12, 20, 28, 34, 28,
- 7, 8, 11, 14, 25, 43, 40, 31,
- 9, 11, 18, 28, 34, 54, 51, 38,
- 12, 17, 27, 32, 40, 52, 56, 46,
- 24, 32, 39, 43, 51, 60, 60, 50,
- 36, 46, 47, 49, 56, 50, 51, 49
-};
-
-static const unsigned char UV_QUANTABLE[64] = {
- 8, 9, 12, 23, 49, 49, 49, 49,
- 9, 10, 13, 33, 49, 49, 49, 49,
- 12, 13, 28, 49, 49, 49, 49, 49,
- 23, 33, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49
-};
-#endif
-
-#define W9968CF_DEC_ERR_CORRUPTED_DATA -1
-#define W9968CF_DEC_ERR_BUF_OVERFLOW -2
-#define W9968CF_DEC_ERR_NO_SOI -3
-#define W9968CF_DEC_ERR_NO_SOF0 -4
-#define W9968CF_DEC_ERR_NO_SOS -5
-#define W9968CF_DEC_ERR_NO_EOI -6
-
-extern void w9968cf_init_decoder(void);
-extern int w9968cf_check_headers(const unsigned char* Pin,
- const unsigned long BUF_SIZE);
-extern int w9968cf_decode(const char* Pin, const unsigned long BUF_SIZE,
- const unsigned W, const unsigned H, char* Pout);
-
-#endif /* _W9968CF_DECODER_H_ */
diff --git a/drivers/media/video/w9968cf_vpp.h b/drivers/media/video/w9968cf_vpp.h
deleted file mode 100644
index 88c9b6c..0000000
--- a/drivers/media/video/w9968cf_vpp.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/***************************************************************************
- * Interface for video post-processing functions for the W996[87]CF driver *
- * for Linux. *
- * *
- * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the Free Software *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
- ***************************************************************************/
-
-#ifndef _W9968CF_VPP_H_
-#define _W9968CF_VPP_H_
-
-#include <linux/module.h>
-#include <asm/types.h>
-
-struct w9968cf_vpp_t {
- struct module* owner;
- int (*check_headers)(const unsigned char*, const unsigned long);
- int (*decode)(const char*, const unsigned long, const unsigned,
- const unsigned, char*);
- void (*swap_yuvbytes)(void*, unsigned long);
- void (*uyvy_to_rgbx)(u8*, unsigned long, u8*, u16, u8);
- void (*scale_up)(u8*, u8*, u16, u16, u16, u16, u16);
-
- u8 busy; /* read-only flag: module is/is not in use */
-};
-
-#endif /* _W9968CF_VPP_H_ */
--
1.6.5.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 4/6] Remove obsolete ovcamchip sensor framework
2010-05-28 17:02 [PATCH 0/6] Remove some obsolete drivers for 2.6.35 Amerigo Wang
` (2 preceding siblings ...)
2010-05-28 17:02 ` [PATCH 3/6] Remove obsolete w9968cf v4l1 driver Amerigo Wang
@ 2010-05-28 17:03 ` Amerigo Wang
2010-05-28 17:03 ` [PATCH 5/6] Remove obsolete stv680 v4l1 driver Amerigo Wang
2010-05-28 17:03 ` [PATCH 6/6] Remove obsolete zc0301 v4l driver Amerigo Wang
5 siblings, 0 replies; 9+ messages in thread
From: Amerigo Wang @ 2010-05-28 17:03 UTC (permalink / raw)
To: linux-media; +Cc: Hans de Goede, Amerigo Wang
From: Amerigo Wang <amwang@redhat.com>
Date: Fri, 28 May 2010 17:45:38 +0800
Subject: [PATCH 4/6] Remove obsolete ovcamchip sensor framework
Only used by obsoleted v4l1 driver
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Amerigo Wang <amwang@redhat.com>
---
Documentation/feature-removal-schedule.txt | 8 -
drivers/media/video/Kconfig | 17 -
drivers/media/video/Makefile | 1 -
drivers/media/video/ovcamchip/Makefile | 4 -
drivers/media/video/ovcamchip/ov6x20.c | 414 ---------------------
drivers/media/video/ovcamchip/ov6x30.c | 373 -------------------
drivers/media/video/ovcamchip/ov76be.c | 302 ----------------
drivers/media/video/ovcamchip/ov7x10.c | 334 -----------------
drivers/media/video/ovcamchip/ov7x20.c | 454 ------------------------
drivers/media/video/ovcamchip/ovcamchip_core.c | 395 ---------------------
drivers/media/video/ovcamchip/ovcamchip_priv.h | 101 ------
11 files changed, 0 insertions(+), 2403 deletions(-)
delete mode 100644 drivers/media/video/ovcamchip/Makefile
delete mode 100644 drivers/media/video/ovcamchip/ov6x20.c
delete mode 100644 drivers/media/video/ovcamchip/ov6x30.c
delete mode 100644 drivers/media/video/ovcamchip/ov76be.c
delete mode 100644 drivers/media/video/ovcamchip/ov7x10.c
delete mode 100644 drivers/media/video/ovcamchip/ov7x20.c
delete mode 100644 drivers/media/video/ovcamchip/ovcamchip_core.c
delete mode 100644 drivers/media/video/ovcamchip/ovcamchip_priv.h
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index e2d630c..42bb6e6 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -459,14 +459,6 @@ Who: Corentin Chary <corentin.chary@gmail.com>
----------------------------
-What: ovcamchip sensor framework
-When: 2.6.35
-Files: drivers/media/video/ovcamchip/*
-Why: Only used by obsoleted v4l1 drivers
-Who: Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
What: stv680 v4l1 driver
When: 2.6.35
Files: drivers/media/video/stv680.[ch]
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index a546444..de12f93 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -1000,23 +1000,6 @@ source "drivers/media/video/usbvideo/Kconfig"
source "drivers/media/video/et61x251/Kconfig"
-config VIDEO_OVCAMCHIP
- tristate "OmniVision Camera Chip support (DEPRECATED)"
- depends on I2C && VIDEO_V4L1
- default n
- ---help---
- This driver is DEPRECATED please use the gspca ov519 module
- instead. Note that for the ov511 / ov518 support of the gspca module
- you need atleast version 0.6.0 of libv4l and for the w9968cf
- atleast version 0.6.3 of libv4l.
-
- Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
- This driver is intended to be used with the ov511 and w9968cf USB
- camera drivers.
-
- To compile this driver as a module, choose M here: the
- module will be called ovcamchip.
-
config USB_SE401
tristate "USB SE401 Camera support"
depends on VIDEO_V4L1
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index bb702c9..e3603b4 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -105,7 +105,6 @@ obj-$(CONFIG_VIDEO_TLG2300) += tlg2300/
obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/
obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/
-obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/
obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
obj-$(CONFIG_VIDEO_MXB) += mxb.o
obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o
diff --git a/drivers/media/video/ovcamchip/Makefile b/drivers/media/video/ovcamchip/Makefile
deleted file mode 100644
index cba4cdf..0000000
--- a/drivers/media/video/ovcamchip/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-ovcamchip-objs := ovcamchip_core.o ov6x20.o ov6x30.o ov7x10.o ov7x20.o \
- ov76be.o
-
-obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip.o
diff --git a/drivers/media/video/ovcamchip/ov6x20.c b/drivers/media/video/ovcamchip/ov6x20.c
deleted file mode 100644
index c04130d..0000000
--- a/drivers/media/video/ovcamchip/ov6x20.c
+++ /dev/null
@@ -1,414 +0,0 @@
-/* OmniVision OV6620/OV6120 Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* Registers */
-#define REG_GAIN 0x00 /* gain [5:0] */
-#define REG_BLUE 0x01 /* blue gain */
-#define REG_RED 0x02 /* red gain */
-#define REG_SAT 0x03 /* saturation */
-#define REG_CNT 0x05 /* Y contrast */
-#define REG_BRT 0x06 /* Y brightness */
-#define REG_WB_BLUE 0x0C /* WB blue ratio [5:0] */
-#define REG_WB_RED 0x0D /* WB red ratio [5:0] */
-#define REG_EXP 0x10 /* exposure */
-
-/* Window parameters */
-#define HWSBASE 0x38
-#define HWEBASE 0x3A
-#define VWSBASE 0x05
-#define VWEBASE 0x06
-
-struct ov6x20 {
- int auto_brt;
- int auto_exp;
- int backlight;
- int bandfilt;
- int mirror;
-};
-
-/* Initial values for use with OV511/OV511+ cameras */
-static struct ovcamchip_regvals regvals_init_6x20_511[] = {
- { 0x12, 0x80 }, /* reset */
- { 0x11, 0x01 },
- { 0x03, 0x60 },
- { 0x05, 0x7f }, /* For when autoadjust is off */
- { 0x07, 0xa8 },
- { 0x0c, 0x24 },
- { 0x0d, 0x24 },
- { 0x0f, 0x15 }, /* COMS */
- { 0x10, 0x75 }, /* AEC Exposure time */
- { 0x12, 0x24 }, /* Enable AGC and AWB */
- { 0x14, 0x04 },
- { 0x16, 0x03 },
- { 0x26, 0xb2 }, /* BLC enable */
- /* 0x28: 0x05 Selects RGB format if RGB on */
- { 0x28, 0x05 },
- { 0x2a, 0x04 }, /* Disable framerate adjust */
- { 0x2d, 0x99 },
- { 0x33, 0xa0 }, /* Color Processing Parameter */
- { 0x34, 0xd2 }, /* Max A/D range */
- { 0x38, 0x8b },
- { 0x39, 0x40 },
-
- { 0x3c, 0x39 }, /* Enable AEC mode changing */
- { 0x3c, 0x3c }, /* Change AEC mode */
- { 0x3c, 0x24 }, /* Disable AEC mode changing */
-
- { 0x3d, 0x80 },
- /* These next two registers (0x4a, 0x4b) are undocumented. They
- * control the color balance */
- { 0x4a, 0x80 },
- { 0x4b, 0x80 },
- { 0x4d, 0xd2 }, /* This reduces noise a bit */
- { 0x4e, 0xc1 },
- { 0x4f, 0x04 },
- { 0xff, 0xff }, /* END MARKER */
-};
-
-/* Initial values for use with OV518 cameras */
-static struct ovcamchip_regvals regvals_init_6x20_518[] = {
- { 0x12, 0x80 }, /* Do a reset */
- { 0x03, 0xc0 }, /* Saturation */
- { 0x05, 0x8a }, /* Contrast */
- { 0x0c, 0x24 }, /* AWB blue */
- { 0x0d, 0x24 }, /* AWB red */
- { 0x0e, 0x8d }, /* Additional 2x gain */
- { 0x0f, 0x25 }, /* Black expanding level = 1.3V */
- { 0x11, 0x01 }, /* Clock div. */
- { 0x12, 0x24 }, /* Enable AGC and AWB */
- { 0x13, 0x01 }, /* (default) */
- { 0x14, 0x80 }, /* Set reserved bit 7 */
- { 0x15, 0x01 }, /* (default) */
- { 0x16, 0x03 }, /* (default) */
- { 0x17, 0x38 }, /* (default) */
- { 0x18, 0xea }, /* (default) */
- { 0x19, 0x04 },
- { 0x1a, 0x93 },
- { 0x1b, 0x00 }, /* (default) */
- { 0x1e, 0xc4 }, /* (default) */
- { 0x1f, 0x04 }, /* (default) */
- { 0x20, 0x20 }, /* Enable 1st stage aperture correction */
- { 0x21, 0x10 }, /* Y offset */
- { 0x22, 0x88 }, /* U offset */
- { 0x23, 0xc0 }, /* Set XTAL power level */
- { 0x24, 0x53 }, /* AEC bright ratio */
- { 0x25, 0x7a }, /* AEC black ratio */
- { 0x26, 0xb2 }, /* BLC enable */
- { 0x27, 0xa2 }, /* Full output range */
- { 0x28, 0x01 }, /* (default) */
- { 0x29, 0x00 }, /* (default) */
- { 0x2a, 0x84 }, /* (default) */
- { 0x2b, 0xa8 }, /* Set custom frame rate */
- { 0x2c, 0xa0 }, /* (reserved) */
- { 0x2d, 0x95 }, /* Enable banding filter */
- { 0x2e, 0x88 }, /* V offset */
- { 0x33, 0x22 }, /* Luminance gamma on */
- { 0x34, 0xc7 }, /* A/D bias */
- { 0x36, 0x12 }, /* (reserved) */
- { 0x37, 0x63 }, /* (reserved) */
- { 0x38, 0x8b }, /* Quick AEC/AEB */
- { 0x39, 0x00 }, /* (default) */
- { 0x3a, 0x0f }, /* (default) */
- { 0x3b, 0x3c }, /* (default) */
- { 0x3c, 0x5c }, /* AEC controls */
- { 0x3d, 0x80 }, /* Drop 1 (bad) frame when AEC change */
- { 0x3e, 0x80 }, /* (default) */
- { 0x3f, 0x02 }, /* (default) */
- { 0x40, 0x10 }, /* (reserved) */
- { 0x41, 0x10 }, /* (reserved) */
- { 0x42, 0x00 }, /* (reserved) */
- { 0x43, 0x7f }, /* (reserved) */
- { 0x44, 0x80 }, /* (reserved) */
- { 0x45, 0x1c }, /* (reserved) */
- { 0x46, 0x1c }, /* (reserved) */
- { 0x47, 0x80 }, /* (reserved) */
- { 0x48, 0x5f }, /* (reserved) */
- { 0x49, 0x00 }, /* (reserved) */
- { 0x4a, 0x00 }, /* Color balance (undocumented) */
- { 0x4b, 0x80 }, /* Color balance (undocumented) */
- { 0x4c, 0x58 }, /* (reserved) */
- { 0x4d, 0xd2 }, /* U *= .938, V *= .838 */
- { 0x4e, 0xa0 }, /* (default) */
- { 0x4f, 0x04 }, /* UV 3-point average */
- { 0x50, 0xff }, /* (reserved) */
- { 0x51, 0x58 }, /* (reserved) */
- { 0x52, 0xc0 }, /* (reserved) */
- { 0x53, 0x42 }, /* (reserved) */
- { 0x27, 0xa6 }, /* Enable manual offset adj. (reg 21 & 22) */
- { 0x12, 0x20 },
- { 0x12, 0x24 },
-
- { 0xff, 0xff }, /* END MARKER */
-};
-
-/* This initializes the OV6x20 camera chip and relevant variables. */
-static int ov6x20_init(struct i2c_client *c)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov6x20 *s;
- int rc;
-
- DDEBUG(4, &c->dev, "entered");
-
- switch (c->adapter->id) {
- case I2C_HW_SMBUS_OV511:
- rc = ov_write_regvals(c, regvals_init_6x20_511);
- break;
- case I2C_HW_SMBUS_OV518:
- rc = ov_write_regvals(c, regvals_init_6x20_518);
- break;
- default:
- dev_err(&c->dev, "ov6x20: Unsupported adapter\n");
- rc = -ENODEV;
- }
-
- if (rc < 0)
- return rc;
-
- ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
- if (!s)
- return -ENOMEM;
-
- s->auto_brt = 1;
- s->auto_exp = 1;
-
- return rc;
-}
-
-static int ov6x20_free(struct i2c_client *c)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
-
- kfree(ov->spriv);
- return 0;
-}
-
-static int ov6x20_set_control(struct i2c_client *c,
- struct ovcamchip_control *ctl)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov6x20 *s = ov->spriv;
- int rc;
- int v = ctl->value;
-
- switch (ctl->id) {
- case OVCAMCHIP_CID_CONT:
- rc = ov_write(c, REG_CNT, v >> 8);
- break;
- case OVCAMCHIP_CID_BRIGHT:
- rc = ov_write(c, REG_BRT, v >> 8);
- break;
- case OVCAMCHIP_CID_SAT:
- rc = ov_write(c, REG_SAT, v >> 8);
- break;
- case OVCAMCHIP_CID_HUE:
- rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
- if (rc < 0)
- goto out;
-
- rc = ov_write(c, REG_BLUE, v >> 8);
- break;
- case OVCAMCHIP_CID_EXP:
- rc = ov_write(c, REG_EXP, v);
- break;
- case OVCAMCHIP_CID_FREQ:
- {
- int sixty = (v == 60);
-
- rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
- if (rc < 0)
- goto out;
-
- rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
- break;
- }
- case OVCAMCHIP_CID_BANDFILT:
- rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
- s->bandfilt = v;
- break;
- case OVCAMCHIP_CID_AUTOBRIGHT:
- rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
- s->auto_brt = v;
- break;
- case OVCAMCHIP_CID_AUTOEXP:
- rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
- s->auto_exp = v;
- break;
- case OVCAMCHIP_CID_BACKLIGHT:
- {
- rc = ov_write_mask(c, 0x4e, v?0xe0:0xc0, 0xe0);
- if (rc < 0)
- goto out;
-
- rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
- if (rc < 0)
- goto out;
-
- rc = ov_write_mask(c, 0x0e, v?0x80:0x00, 0x80);
- s->backlight = v;
- break;
- }
- case OVCAMCHIP_CID_MIRROR:
- rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
- s->mirror = v;
- break;
- default:
- DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
- return -EPERM;
- }
-
-out:
- DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
- return rc;
-}
-
-static int ov6x20_get_control(struct i2c_client *c,
- struct ovcamchip_control *ctl)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov6x20 *s = ov->spriv;
- int rc = 0;
- unsigned char val = 0;
-
- switch (ctl->id) {
- case OVCAMCHIP_CID_CONT:
- rc = ov_read(c, REG_CNT, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_BRIGHT:
- rc = ov_read(c, REG_BRT, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_SAT:
- rc = ov_read(c, REG_SAT, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_HUE:
- rc = ov_read(c, REG_BLUE, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_EXP:
- rc = ov_read(c, REG_EXP, &val);
- ctl->value = val;
- break;
- case OVCAMCHIP_CID_BANDFILT:
- ctl->value = s->bandfilt;
- break;
- case OVCAMCHIP_CID_AUTOBRIGHT:
- ctl->value = s->auto_brt;
- break;
- case OVCAMCHIP_CID_AUTOEXP:
- ctl->value = s->auto_exp;
- break;
- case OVCAMCHIP_CID_BACKLIGHT:
- ctl->value = s->backlight;
- break;
- case OVCAMCHIP_CID_MIRROR:
- ctl->value = s->mirror;
- break;
- default:
- DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
- return -EPERM;
- }
-
- DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
- return rc;
-}
-
-static int ov6x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
- /******** QCIF-specific regs ********/
-
- ov_write(c, 0x14, win->quarter?0x24:0x04);
-
- /******** Palette-specific regs ********/
-
- /* OV518 needs 8 bit multiplexed in color mode, and 16 bit in B&W */
- if (c->adapter->id == I2C_HW_SMBUS_OV518) {
- if (win->format == VIDEO_PALETTE_GREY)
- ov_write_mask(c, 0x13, 0x00, 0x20);
- else
- ov_write_mask(c, 0x13, 0x20, 0x20);
- } else {
- if (win->format == VIDEO_PALETTE_GREY)
- ov_write_mask(c, 0x13, 0x20, 0x20);
- else
- ov_write_mask(c, 0x13, 0x00, 0x20);
- }
-
- /******** Clock programming ********/
-
- /* The OV6620 needs special handling. This prevents the
- * severe banding that normally occurs */
-
- /* Clock down */
- ov_write(c, 0x2a, 0x04);
-
- ov_write(c, 0x11, win->clockdiv);
-
- ov_write(c, 0x2a, 0x84);
- /* This next setting is critical. It seems to improve
- * the gain or the contrast. The "reserved" bits seem
- * to have some effect in this case. */
- ov_write(c, 0x2d, 0x85); /* FIXME: This messes up banding filter */
-
- return 0;
-}
-
-static int ov6x20_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
- int ret, hwscale, vwscale;
-
- ret = ov6x20_mode_init(c, win);
- if (ret < 0)
- return ret;
-
- if (win->quarter) {
- hwscale = 0;
- vwscale = 0;
- } else {
- hwscale = 1;
- vwscale = 1; /* The datasheet says 0; it's wrong */
- }
-
- ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
- ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
- ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
- ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
- return 0;
-}
-
-static int ov6x20_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
- switch (cmd) {
- case OVCAMCHIP_CMD_S_CTRL:
- return ov6x20_set_control(c, arg);
- case OVCAMCHIP_CMD_G_CTRL:
- return ov6x20_get_control(c, arg);
- case OVCAMCHIP_CMD_S_MODE:
- return ov6x20_set_window(c, arg);
- default:
- DDEBUG(2, &c->dev, "command not supported: %d", cmd);
- return -ENOIOCTLCMD;
- }
-}
-
-struct ovcamchip_ops ov6x20_ops = {
- .init = ov6x20_init,
- .free = ov6x20_free,
- .command = ov6x20_command,
-};
diff --git a/drivers/media/video/ovcamchip/ov6x30.c b/drivers/media/video/ovcamchip/ov6x30.c
deleted file mode 100644
index 73b94f5..0000000
--- a/drivers/media/video/ovcamchip/ov6x30.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/* OmniVision OV6630/OV6130 Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* Registers */
-#define REG_GAIN 0x00 /* gain [5:0] */
-#define REG_BLUE 0x01 /* blue gain */
-#define REG_RED 0x02 /* red gain */
-#define REG_SAT 0x03 /* saturation [7:3] */
-#define REG_CNT 0x05 /* Y contrast [3:0] */
-#define REG_BRT 0x06 /* Y brightness */
-#define REG_SHARP 0x07 /* sharpness */
-#define REG_WB_BLUE 0x0C /* WB blue ratio [5:0] */
-#define REG_WB_RED 0x0D /* WB red ratio [5:0] */
-#define REG_EXP 0x10 /* exposure */
-
-/* Window parameters */
-#define HWSBASE 0x38
-#define HWEBASE 0x3A
-#define VWSBASE 0x05
-#define VWEBASE 0x06
-
-struct ov6x30 {
- int auto_brt;
- int auto_exp;
- int backlight;
- int bandfilt;
- int mirror;
-};
-
-static struct ovcamchip_regvals regvals_init_6x30[] = {
- { 0x12, 0x80 }, /* reset */
- { 0x00, 0x1f }, /* Gain */
- { 0x01, 0x99 }, /* Blue gain */
- { 0x02, 0x7c }, /* Red gain */
- { 0x03, 0xc0 }, /* Saturation */
- { 0x05, 0x0a }, /* Contrast */
- { 0x06, 0x95 }, /* Brightness */
- { 0x07, 0x2d }, /* Sharpness */
- { 0x0c, 0x20 },
- { 0x0d, 0x20 },
- { 0x0e, 0x20 },
- { 0x0f, 0x05 },
- { 0x10, 0x9a }, /* "exposure check" */
- { 0x11, 0x00 }, /* Pixel clock = fastest */
- { 0x12, 0x24 }, /* Enable AGC and AWB */
- { 0x13, 0x21 },
- { 0x14, 0x80 },
- { 0x15, 0x01 },
- { 0x16, 0x03 },
- { 0x17, 0x38 },
- { 0x18, 0xea },
- { 0x19, 0x04 },
- { 0x1a, 0x93 },
- { 0x1b, 0x00 },
- { 0x1e, 0xc4 },
- { 0x1f, 0x04 },
- { 0x20, 0x20 },
- { 0x21, 0x10 },
- { 0x22, 0x88 },
- { 0x23, 0xc0 }, /* Crystal circuit power level */
- { 0x25, 0x9a }, /* Increase AEC black pixel ratio */
- { 0x26, 0xb2 }, /* BLC enable */
- { 0x27, 0xa2 },
- { 0x28, 0x00 },
- { 0x29, 0x00 },
- { 0x2a, 0x84 }, /* (keep) */
- { 0x2b, 0xa8 }, /* (keep) */
- { 0x2c, 0xa0 },
- { 0x2d, 0x95 }, /* Enable auto-brightness */
- { 0x2e, 0x88 },
- { 0x33, 0x26 },
- { 0x34, 0x03 },
- { 0x36, 0x8f },
- { 0x37, 0x80 },
- { 0x38, 0x83 },
- { 0x39, 0x80 },
- { 0x3a, 0x0f },
- { 0x3b, 0x3c },
- { 0x3c, 0x1a },
- { 0x3d, 0x80 },
- { 0x3e, 0x80 },
- { 0x3f, 0x0e },
- { 0x40, 0x00 }, /* White bal */
- { 0x41, 0x00 }, /* White bal */
- { 0x42, 0x80 },
- { 0x43, 0x3f }, /* White bal */
- { 0x44, 0x80 },
- { 0x45, 0x20 },
- { 0x46, 0x20 },
- { 0x47, 0x80 },
- { 0x48, 0x7f },
- { 0x49, 0x00 },
- { 0x4a, 0x00 },
- { 0x4b, 0x80 },
- { 0x4c, 0xd0 },
- { 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
- { 0x4e, 0x40 },
- { 0x4f, 0x07 }, /* UV average mode, color killer: strongest */
- { 0x50, 0xff },
- { 0x54, 0x23 }, /* Max AGC gain: 18dB */
- { 0x55, 0xff },
- { 0x56, 0x12 },
- { 0x57, 0x81 }, /* (default) */
- { 0x58, 0x75 },
- { 0x59, 0x01 }, /* AGC dark current compensation: +1 */
- { 0x5a, 0x2c },
- { 0x5b, 0x0f }, /* AWB chrominance levels */
- { 0x5c, 0x10 },
- { 0x3d, 0x80 },
- { 0x27, 0xa6 },
- /* Toggle AWB off and on */
- { 0x12, 0x20 },
- { 0x12, 0x24 },
-
- { 0xff, 0xff }, /* END MARKER */
-};
-
-/* This initializes the OV6x30 camera chip and relevant variables. */
-static int ov6x30_init(struct i2c_client *c)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov6x30 *s;
- int rc;
-
- DDEBUG(4, &c->dev, "entered");
-
- rc = ov_write_regvals(c, regvals_init_6x30);
- if (rc < 0)
- return rc;
-
- ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
- if (!s)
- return -ENOMEM;
-
- s->auto_brt = 1;
- s->auto_exp = 1;
-
- return rc;
-}
-
-static int ov6x30_free(struct i2c_client *c)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
-
- kfree(ov->spriv);
- return 0;
-}
-
-static int ov6x30_set_control(struct i2c_client *c,
- struct ovcamchip_control *ctl)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov6x30 *s = ov->spriv;
- int rc;
- int v = ctl->value;
-
- switch (ctl->id) {
- case OVCAMCHIP_CID_CONT:
- rc = ov_write_mask(c, REG_CNT, v >> 12, 0x0f);
- break;
- case OVCAMCHIP_CID_BRIGHT:
- rc = ov_write(c, REG_BRT, v >> 8);
- break;
- case OVCAMCHIP_CID_SAT:
- rc = ov_write(c, REG_SAT, v >> 8);
- break;
- case OVCAMCHIP_CID_HUE:
- rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
- if (rc < 0)
- goto out;
-
- rc = ov_write(c, REG_BLUE, v >> 8);
- break;
- case OVCAMCHIP_CID_EXP:
- rc = ov_write(c, REG_EXP, v);
- break;
- case OVCAMCHIP_CID_FREQ:
- {
- int sixty = (v == 60);
-
- rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
- if (rc < 0)
- goto out;
-
- rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
- break;
- }
- case OVCAMCHIP_CID_BANDFILT:
- rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
- s->bandfilt = v;
- break;
- case OVCAMCHIP_CID_AUTOBRIGHT:
- rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
- s->auto_brt = v;
- break;
- case OVCAMCHIP_CID_AUTOEXP:
- rc = ov_write_mask(c, 0x28, v?0x00:0x10, 0x10);
- s->auto_exp = v;
- break;
- case OVCAMCHIP_CID_BACKLIGHT:
- {
- rc = ov_write_mask(c, 0x4e, v?0x80:0x60, 0xe0);
- if (rc < 0)
- goto out;
-
- rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
- if (rc < 0)
- goto out;
-
- rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02);
- s->backlight = v;
- break;
- }
- case OVCAMCHIP_CID_MIRROR:
- rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
- s->mirror = v;
- break;
- default:
- DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
- return -EPERM;
- }
-
-out:
- DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
- return rc;
-}
-
-static int ov6x30_get_control(struct i2c_client *c,
- struct ovcamchip_control *ctl)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov6x30 *s = ov->spriv;
- int rc = 0;
- unsigned char val = 0;
-
- switch (ctl->id) {
- case OVCAMCHIP_CID_CONT:
- rc = ov_read(c, REG_CNT, &val);
- ctl->value = (val & 0x0f) << 12;
- break;
- case OVCAMCHIP_CID_BRIGHT:
- rc = ov_read(c, REG_BRT, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_SAT:
- rc = ov_read(c, REG_SAT, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_HUE:
- rc = ov_read(c, REG_BLUE, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_EXP:
- rc = ov_read(c, REG_EXP, &val);
- ctl->value = val;
- break;
- case OVCAMCHIP_CID_BANDFILT:
- ctl->value = s->bandfilt;
- break;
- case OVCAMCHIP_CID_AUTOBRIGHT:
- ctl->value = s->auto_brt;
- break;
- case OVCAMCHIP_CID_AUTOEXP:
- ctl->value = s->auto_exp;
- break;
- case OVCAMCHIP_CID_BACKLIGHT:
- ctl->value = s->backlight;
- break;
- case OVCAMCHIP_CID_MIRROR:
- ctl->value = s->mirror;
- break;
- default:
- DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
- return -EPERM;
- }
-
- DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
- return rc;
-}
-
-static int ov6x30_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
- /******** QCIF-specific regs ********/
-
- ov_write_mask(c, 0x14, win->quarter?0x20:0x00, 0x20);
-
- /******** Palette-specific regs ********/
-
- if (win->format == VIDEO_PALETTE_GREY) {
- if (c->adapter->id == I2C_HW_SMBUS_OV518) {
- /* Do nothing - we're already in 8-bit mode */
- } else {
- ov_write_mask(c, 0x13, 0x20, 0x20);
- }
- } else {
- /* The OV518 needs special treatment. Although both the OV518
- * and the OV6630 support a 16-bit video bus, only the 8 bit Y
- * bus is actually used. The UV bus is tied to ground.
- * Therefore, the OV6630 needs to be in 8-bit multiplexed
- * output mode */
-
- if (c->adapter->id == I2C_HW_SMBUS_OV518) {
- /* Do nothing - we want to stay in 8-bit mode */
- /* Warning: Messing with reg 0x13 breaks OV518 color */
- } else {
- ov_write_mask(c, 0x13, 0x00, 0x20);
- }
- }
-
- /******** Clock programming ********/
-
- ov_write(c, 0x11, win->clockdiv);
-
- return 0;
-}
-
-static int ov6x30_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
- int ret, hwscale, vwscale;
-
- ret = ov6x30_mode_init(c, win);
- if (ret < 0)
- return ret;
-
- if (win->quarter) {
- hwscale = 0;
- vwscale = 0;
- } else {
- hwscale = 1;
- vwscale = 1; /* The datasheet says 0; it's wrong */
- }
-
- ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
- ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
- ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
- ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
- return 0;
-}
-
-static int ov6x30_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
- switch (cmd) {
- case OVCAMCHIP_CMD_S_CTRL:
- return ov6x30_set_control(c, arg);
- case OVCAMCHIP_CMD_G_CTRL:
- return ov6x30_get_control(c, arg);
- case OVCAMCHIP_CMD_S_MODE:
- return ov6x30_set_window(c, arg);
- default:
- DDEBUG(2, &c->dev, "command not supported: %d", cmd);
- return -ENOIOCTLCMD;
- }
-}
-
-struct ovcamchip_ops ov6x30_ops = {
- .init = ov6x30_init,
- .free = ov6x30_free,
- .command = ov6x30_command,
-};
diff --git a/drivers/media/video/ovcamchip/ov76be.c b/drivers/media/video/ovcamchip/ov76be.c
deleted file mode 100644
index 11f6be9..0000000
--- a/drivers/media/video/ovcamchip/ov76be.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/* OmniVision OV76BE Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* OV7610 registers: Since the OV76BE is undocumented, we'll settle for these
- * for now. */
-#define REG_GAIN 0x00 /* gain [5:0] */
-#define REG_BLUE 0x01 /* blue channel balance */
-#define REG_RED 0x02 /* red channel balance */
-#define REG_SAT 0x03 /* saturation */
-#define REG_CNT 0x05 /* Y contrast */
-#define REG_BRT 0x06 /* Y brightness */
-#define REG_BLUE_BIAS 0x0C /* blue channel bias [5:0] */
-#define REG_RED_BIAS 0x0D /* red channel bias [5:0] */
-#define REG_GAMMA_COEFF 0x0E /* gamma settings */
-#define REG_WB_RANGE 0x0F /* AEC/ALC/S-AWB settings */
-#define REG_EXP 0x10 /* manual exposure setting */
-#define REG_CLOCK 0x11 /* polarity/clock prescaler */
-#define REG_FIELD_DIVIDE 0x16 /* field interval/mode settings */
-#define REG_HWIN_START 0x17 /* horizontal window start */
-#define REG_HWIN_END 0x18 /* horizontal window end */
-#define REG_VWIN_START 0x19 /* vertical window start */
-#define REG_VWIN_END 0x1A /* vertical window end */
-#define REG_PIXEL_SHIFT 0x1B /* pixel shift */
-#define REG_YOFFSET 0x21 /* Y channel offset */
-#define REG_UOFFSET 0x22 /* U channel offset */
-#define REG_ECW 0x24 /* exposure white level for AEC */
-#define REG_ECB 0x25 /* exposure black level for AEC */
-#define REG_FRAMERATE_H 0x2A /* frame rate MSB + misc */
-#define REG_FRAMERATE_L 0x2B /* frame rate LSB */
-#define REG_ALC 0x2C /* Auto Level Control settings */
-#define REG_VOFFSET 0x2E /* V channel offset adjustment */
-#define REG_ARRAY_BIAS 0x2F /* array bias -- don't change */
-#define REG_YGAMMA 0x33 /* misc gamma settings [7:6] */
-#define REG_BIAS_ADJUST 0x34 /* misc bias settings */
-
-/* Window parameters */
-#define HWSBASE 0x38
-#define HWEBASE 0x3a
-#define VWSBASE 0x05
-#define VWEBASE 0x05
-
-struct ov76be {
- int auto_brt;
- int auto_exp;
- int bandfilt;
- int mirror;
-};
-
-/* NOTE: These are the same as the 7x10 settings, but should eventually be
- * optimized for the OV76BE */
-static struct ovcamchip_regvals regvals_init_76be[] = {
- { 0x10, 0xff },
- { 0x16, 0x03 },
- { 0x28, 0x24 },
- { 0x2b, 0xac },
- { 0x12, 0x00 },
- { 0x38, 0x81 },
- { 0x28, 0x24 }, /* 0c */
- { 0x0f, 0x85 }, /* lg's setting */
- { 0x15, 0x01 },
- { 0x20, 0x1c },
- { 0x23, 0x2a },
- { 0x24, 0x10 },
- { 0x25, 0x8a },
- { 0x26, 0xa2 },
- { 0x27, 0xc2 },
- { 0x2a, 0x04 },
- { 0x2c, 0xfe },
- { 0x2d, 0x93 },
- { 0x30, 0x71 },
- { 0x31, 0x60 },
- { 0x32, 0x26 },
- { 0x33, 0x20 },
- { 0x34, 0x48 },
- { 0x12, 0x24 },
- { 0x11, 0x01 },
- { 0x0c, 0x24 },
- { 0x0d, 0x24 },
- { 0xff, 0xff }, /* END MARKER */
-};
-
-/* This initializes the OV76be camera chip and relevant variables. */
-static int ov76be_init(struct i2c_client *c)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov76be *s;
- int rc;
-
- DDEBUG(4, &c->dev, "entered");
-
- rc = ov_write_regvals(c, regvals_init_76be);
- if (rc < 0)
- return rc;
-
- ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
- if (!s)
- return -ENOMEM;
-
- s->auto_brt = 1;
- s->auto_exp = 1;
-
- return rc;
-}
-
-static int ov76be_free(struct i2c_client *c)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
-
- kfree(ov->spriv);
- return 0;
-}
-
-static int ov76be_set_control(struct i2c_client *c,
- struct ovcamchip_control *ctl)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov76be *s = ov->spriv;
- int rc;
- int v = ctl->value;
-
- switch (ctl->id) {
- case OVCAMCHIP_CID_BRIGHT:
- rc = ov_write(c, REG_BRT, v >> 8);
- break;
- case OVCAMCHIP_CID_SAT:
- rc = ov_write(c, REG_SAT, v >> 8);
- break;
- case OVCAMCHIP_CID_EXP:
- rc = ov_write(c, REG_EXP, v);
- break;
- case OVCAMCHIP_CID_FREQ:
- {
- int sixty = (v == 60);
-
- rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
- if (rc < 0)
- goto out;
-
- rc = ov_write(c, 0x2b, sixty?0x00:0xac);
- if (rc < 0)
- goto out;
-
- rc = ov_write_mask(c, 0x76, 0x01, 0x01);
- break;
- }
- case OVCAMCHIP_CID_BANDFILT:
- rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
- s->bandfilt = v;
- break;
- case OVCAMCHIP_CID_AUTOBRIGHT:
- rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
- s->auto_brt = v;
- break;
- case OVCAMCHIP_CID_AUTOEXP:
- rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
- s->auto_exp = v;
- break;
- case OVCAMCHIP_CID_MIRROR:
- rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
- s->mirror = v;
- break;
- default:
- DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
- return -EPERM;
- }
-
-out:
- DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
- return rc;
-}
-
-static int ov76be_get_control(struct i2c_client *c,
- struct ovcamchip_control *ctl)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov76be *s = ov->spriv;
- int rc = 0;
- unsigned char val = 0;
-
- switch (ctl->id) {
- case OVCAMCHIP_CID_BRIGHT:
- rc = ov_read(c, REG_BRT, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_SAT:
- rc = ov_read(c, REG_SAT, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_EXP:
- rc = ov_read(c, REG_EXP, &val);
- ctl->value = val;
- break;
- case OVCAMCHIP_CID_BANDFILT:
- ctl->value = s->bandfilt;
- break;
- case OVCAMCHIP_CID_AUTOBRIGHT:
- ctl->value = s->auto_brt;
- break;
- case OVCAMCHIP_CID_AUTOEXP:
- ctl->value = s->auto_exp;
- break;
- case OVCAMCHIP_CID_MIRROR:
- ctl->value = s->mirror;
- break;
- default:
- DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
- return -EPERM;
- }
-
- DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
- return rc;
-}
-
-static int ov76be_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
- int qvga = win->quarter;
-
- /******** QVGA-specific regs ********/
-
- ov_write(c, 0x14, qvga?0xa4:0x84);
-
- /******** Palette-specific regs ********/
-
- if (win->format == VIDEO_PALETTE_GREY) {
- ov_write_mask(c, 0x0e, 0x40, 0x40);
- ov_write_mask(c, 0x13, 0x20, 0x20);
- } else {
- ov_write_mask(c, 0x0e, 0x00, 0x40);
- ov_write_mask(c, 0x13, 0x00, 0x20);
- }
-
- /******** Clock programming ********/
-
- ov_write(c, 0x11, win->clockdiv);
-
- /******** Resolution-specific ********/
-
- if (win->width == 640 && win->height == 480)
- ov_write(c, 0x35, 0x9e);
- else
- ov_write(c, 0x35, 0x1e);
-
- return 0;
-}
-
-static int ov76be_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
- int ret, hwscale, vwscale;
-
- ret = ov76be_mode_init(c, win);
- if (ret < 0)
- return ret;
-
- if (win->quarter) {
- hwscale = 1;
- vwscale = 0;
- } else {
- hwscale = 2;
- vwscale = 1;
- }
-
- ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
- ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
- ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
- ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
- return 0;
-}
-
-static int ov76be_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
- switch (cmd) {
- case OVCAMCHIP_CMD_S_CTRL:
- return ov76be_set_control(c, arg);
- case OVCAMCHIP_CMD_G_CTRL:
- return ov76be_get_control(c, arg);
- case OVCAMCHIP_CMD_S_MODE:
- return ov76be_set_window(c, arg);
- default:
- DDEBUG(2, &c->dev, "command not supported: %d", cmd);
- return -ENOIOCTLCMD;
- }
-}
-
-struct ovcamchip_ops ov76be_ops = {
- .init = ov76be_init,
- .free = ov76be_free,
- .command = ov76be_command,
-};
diff --git a/drivers/media/video/ovcamchip/ov7x10.c b/drivers/media/video/ovcamchip/ov7x10.c
deleted file mode 100644
index 5206e79..0000000
--- a/drivers/media/video/ovcamchip/ov7x10.c
+++ /dev/null
@@ -1,334 +0,0 @@
-/* OmniVision OV7610/OV7110 Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* Registers */
-#define REG_GAIN 0x00 /* gain [5:0] */
-#define REG_BLUE 0x01 /* blue channel balance */
-#define REG_RED 0x02 /* red channel balance */
-#define REG_SAT 0x03 /* saturation */
-#define REG_CNT 0x05 /* Y contrast */
-#define REG_BRT 0x06 /* Y brightness */
-#define REG_BLUE_BIAS 0x0C /* blue channel bias [5:0] */
-#define REG_RED_BIAS 0x0D /* red channel bias [5:0] */
-#define REG_GAMMA_COEFF 0x0E /* gamma settings */
-#define REG_WB_RANGE 0x0F /* AEC/ALC/S-AWB settings */
-#define REG_EXP 0x10 /* manual exposure setting */
-#define REG_CLOCK 0x11 /* polarity/clock prescaler */
-#define REG_FIELD_DIVIDE 0x16 /* field interval/mode settings */
-#define REG_HWIN_START 0x17 /* horizontal window start */
-#define REG_HWIN_END 0x18 /* horizontal window end */
-#define REG_VWIN_START 0x19 /* vertical window start */
-#define REG_VWIN_END 0x1A /* vertical window end */
-#define REG_PIXEL_SHIFT 0x1B /* pixel shift */
-#define REG_YOFFSET 0x21 /* Y channel offset */
-#define REG_UOFFSET 0x22 /* U channel offset */
-#define REG_ECW 0x24 /* exposure white level for AEC */
-#define REG_ECB 0x25 /* exposure black level for AEC */
-#define REG_FRAMERATE_H 0x2A /* frame rate MSB + misc */
-#define REG_FRAMERATE_L 0x2B /* frame rate LSB */
-#define REG_ALC 0x2C /* Auto Level Control settings */
-#define REG_VOFFSET 0x2E /* V channel offset adjustment */
-#define REG_ARRAY_BIAS 0x2F /* array bias -- don't change */
-#define REG_YGAMMA 0x33 /* misc gamma settings [7:6] */
-#define REG_BIAS_ADJUST 0x34 /* misc bias settings */
-
-/* Window parameters */
-#define HWSBASE 0x38
-#define HWEBASE 0x3a
-#define VWSBASE 0x05
-#define VWEBASE 0x05
-
-struct ov7x10 {
- int auto_brt;
- int auto_exp;
- int bandfilt;
- int mirror;
-};
-
-/* Lawrence Glaister <lg@jfm.bc.ca> reports:
- *
- * Register 0x0f in the 7610 has the following effects:
- *
- * 0x85 (AEC method 1): Best overall, good contrast range
- * 0x45 (AEC method 2): Very overexposed
- * 0xa5 (spec sheet default): Ok, but the black level is
- * shifted resulting in loss of contrast
- * 0x05 (old driver setting): very overexposed, too much
- * contrast
- */
-static struct ovcamchip_regvals regvals_init_7x10[] = {
- { 0x10, 0xff },
- { 0x16, 0x03 },
- { 0x28, 0x24 },
- { 0x2b, 0xac },
- { 0x12, 0x00 },
- { 0x38, 0x81 },
- { 0x28, 0x24 }, /* 0c */
- { 0x0f, 0x85 }, /* lg's setting */
- { 0x15, 0x01 },
- { 0x20, 0x1c },
- { 0x23, 0x2a },
- { 0x24, 0x10 },
- { 0x25, 0x8a },
- { 0x26, 0xa2 },
- { 0x27, 0xc2 },
- { 0x2a, 0x04 },
- { 0x2c, 0xfe },
- { 0x2d, 0x93 },
- { 0x30, 0x71 },
- { 0x31, 0x60 },
- { 0x32, 0x26 },
- { 0x33, 0x20 },
- { 0x34, 0x48 },
- { 0x12, 0x24 },
- { 0x11, 0x01 },
- { 0x0c, 0x24 },
- { 0x0d, 0x24 },
- { 0xff, 0xff }, /* END MARKER */
-};
-
-/* This initializes the OV7x10 camera chip and relevant variables. */
-static int ov7x10_init(struct i2c_client *c)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov7x10 *s;
- int rc;
-
- DDEBUG(4, &c->dev, "entered");
-
- rc = ov_write_regvals(c, regvals_init_7x10);
- if (rc < 0)
- return rc;
-
- ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
- if (!s)
- return -ENOMEM;
-
- s->auto_brt = 1;
- s->auto_exp = 1;
-
- return rc;
-}
-
-static int ov7x10_free(struct i2c_client *c)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
-
- kfree(ov->spriv);
- return 0;
-}
-
-static int ov7x10_set_control(struct i2c_client *c,
- struct ovcamchip_control *ctl)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov7x10 *s = ov->spriv;
- int rc;
- int v = ctl->value;
-
- switch (ctl->id) {
- case OVCAMCHIP_CID_CONT:
- rc = ov_write(c, REG_CNT, v >> 8);
- break;
- case OVCAMCHIP_CID_BRIGHT:
- rc = ov_write(c, REG_BRT, v >> 8);
- break;
- case OVCAMCHIP_CID_SAT:
- rc = ov_write(c, REG_SAT, v >> 8);
- break;
- case OVCAMCHIP_CID_HUE:
- rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
- if (rc < 0)
- goto out;
-
- rc = ov_write(c, REG_BLUE, v >> 8);
- break;
- case OVCAMCHIP_CID_EXP:
- rc = ov_write(c, REG_EXP, v);
- break;
- case OVCAMCHIP_CID_FREQ:
- {
- int sixty = (v == 60);
-
- rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
- if (rc < 0)
- goto out;
-
- rc = ov_write(c, 0x2b, sixty?0x00:0xac);
- if (rc < 0)
- goto out;
-
- rc = ov_write_mask(c, 0x13, 0x10, 0x10);
- if (rc < 0)
- goto out;
-
- rc = ov_write_mask(c, 0x13, 0x00, 0x10);
- break;
- }
- case OVCAMCHIP_CID_BANDFILT:
- rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
- s->bandfilt = v;
- break;
- case OVCAMCHIP_CID_AUTOBRIGHT:
- rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
- s->auto_brt = v;
- break;
- case OVCAMCHIP_CID_AUTOEXP:
- rc = ov_write_mask(c, 0x29, v?0x00:0x80, 0x80);
- s->auto_exp = v;
- break;
- case OVCAMCHIP_CID_MIRROR:
- rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
- s->mirror = v;
- break;
- default:
- DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
- return -EPERM;
- }
-
-out:
- DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
- return rc;
-}
-
-static int ov7x10_get_control(struct i2c_client *c,
- struct ovcamchip_control *ctl)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov7x10 *s = ov->spriv;
- int rc = 0;
- unsigned char val = 0;
-
- switch (ctl->id) {
- case OVCAMCHIP_CID_CONT:
- rc = ov_read(c, REG_CNT, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_BRIGHT:
- rc = ov_read(c, REG_BRT, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_SAT:
- rc = ov_read(c, REG_SAT, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_HUE:
- rc = ov_read(c, REG_BLUE, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_EXP:
- rc = ov_read(c, REG_EXP, &val);
- ctl->value = val;
- break;
- case OVCAMCHIP_CID_BANDFILT:
- ctl->value = s->bandfilt;
- break;
- case OVCAMCHIP_CID_AUTOBRIGHT:
- ctl->value = s->auto_brt;
- break;
- case OVCAMCHIP_CID_AUTOEXP:
- ctl->value = s->auto_exp;
- break;
- case OVCAMCHIP_CID_MIRROR:
- ctl->value = s->mirror;
- break;
- default:
- DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
- return -EPERM;
- }
-
- DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
- return rc;
-}
-
-static int ov7x10_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
- int qvga = win->quarter;
-
- /******** QVGA-specific regs ********/
-
- ov_write(c, 0x14, qvga?0x24:0x04);
-
- /******** Palette-specific regs ********/
-
- if (win->format == VIDEO_PALETTE_GREY) {
- ov_write_mask(c, 0x0e, 0x40, 0x40);
- ov_write_mask(c, 0x13, 0x20, 0x20);
- } else {
- ov_write_mask(c, 0x0e, 0x00, 0x40);
- ov_write_mask(c, 0x13, 0x00, 0x20);
- }
-
- /******** Clock programming ********/
-
- ov_write(c, 0x11, win->clockdiv);
-
- /******** Resolution-specific ********/
-
- if (win->width == 640 && win->height == 480)
- ov_write(c, 0x35, 0x9e);
- else
- ov_write(c, 0x35, 0x1e);
-
- return 0;
-}
-
-static int ov7x10_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
- int ret, hwscale, vwscale;
-
- ret = ov7x10_mode_init(c, win);
- if (ret < 0)
- return ret;
-
- if (win->quarter) {
- hwscale = 1;
- vwscale = 0;
- } else {
- hwscale = 2;
- vwscale = 1;
- }
-
- ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
- ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
- ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
- ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
- return 0;
-}
-
-static int ov7x10_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
- switch (cmd) {
- case OVCAMCHIP_CMD_S_CTRL:
- return ov7x10_set_control(c, arg);
- case OVCAMCHIP_CMD_G_CTRL:
- return ov7x10_get_control(c, arg);
- case OVCAMCHIP_CMD_S_MODE:
- return ov7x10_set_window(c, arg);
- default:
- DDEBUG(2, &c->dev, "command not supported: %d", cmd);
- return -ENOIOCTLCMD;
- }
-}
-
-struct ovcamchip_ops ov7x10_ops = {
- .init = ov7x10_init,
- .free = ov7x10_free,
- .command = ov7x10_command,
-};
diff --git a/drivers/media/video/ovcamchip/ov7x20.c b/drivers/media/video/ovcamchip/ov7x20.c
deleted file mode 100644
index 8e26ae3..0000000
--- a/drivers/media/video/ovcamchip/ov7x20.c
+++ /dev/null
@@ -1,454 +0,0 @@
-/* OmniVision OV7620/OV7120 Camera Chip Support Code
- *
- * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/slab.h>
-#include "ovcamchip_priv.h"
-
-/* Registers */
-#define REG_GAIN 0x00 /* gain [5:0] */
-#define REG_BLUE 0x01 /* blue gain */
-#define REG_RED 0x02 /* red gain */
-#define REG_SAT 0x03 /* saturation */
-#define REG_BRT 0x06 /* Y brightness */
-#define REG_SHARP 0x07 /* analog sharpness */
-#define REG_BLUE_BIAS 0x0C /* WB blue ratio [5:0] */
-#define REG_RED_BIAS 0x0D /* WB red ratio [5:0] */
-#define REG_EXP 0x10 /* exposure */
-
-/* Default control settings. Values are in terms of V4L2 controls. */
-#define OV7120_DFL_BRIGHT 0x60
-#define OV7620_DFL_BRIGHT 0x60
-#define OV7120_DFL_SAT 0xb0
-#define OV7620_DFL_SAT 0xc0
-#define DFL_AUTO_EXP 1
-#define DFL_AUTO_GAIN 1
-#define OV7120_DFL_GAIN 0x00
-#define OV7620_DFL_GAIN 0x00
-/* NOTE: Since autoexposure is the default, these aren't programmed into the
- * OV7x20 chip. They are just here because V4L2 expects a default */
-#define OV7120_DFL_EXP 0x7f
-#define OV7620_DFL_EXP 0x7f
-
-/* Window parameters */
-#define HWSBASE 0x2F /* From 7620.SET (spec is wrong) */
-#define HWEBASE 0x2F
-#define VWSBASE 0x05
-#define VWEBASE 0x05
-
-struct ov7x20 {
- int auto_brt;
- int auto_exp;
- int auto_gain;
- int backlight;
- int bandfilt;
- int mirror;
-};
-
-/* Contrast look-up table */
-static unsigned char ctab[] = {
- 0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57,
- 0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff
-};
-
-/* Settings for (Black & White) OV7120 camera chip */
-static struct ovcamchip_regvals regvals_init_7120[] = {
- { 0x12, 0x80 }, /* reset */
- { 0x13, 0x00 }, /* Autoadjust off */
- { 0x12, 0x20 }, /* Disable AWB */
- { 0x13, DFL_AUTO_GAIN?0x01:0x00 }, /* Autoadjust on (if desired) */
- { 0x00, OV7120_DFL_GAIN },
- { 0x01, 0x80 },
- { 0x02, 0x80 },
- { 0x03, OV7120_DFL_SAT },
- { 0x06, OV7120_DFL_BRIGHT },
- { 0x07, 0x00 },
- { 0x0c, 0x20 },
- { 0x0d, 0x20 },
- { 0x11, 0x01 },
- { 0x14, 0x84 },
- { 0x15, 0x01 },
- { 0x16, 0x03 },
- { 0x17, 0x2f },
- { 0x18, 0xcf },
- { 0x19, 0x06 },
- { 0x1a, 0xf5 },
- { 0x1b, 0x00 },
- { 0x20, 0x08 },
- { 0x21, 0x80 },
- { 0x22, 0x80 },
- { 0x23, 0x00 },
- { 0x26, 0xa0 },
- { 0x27, 0xfa },
- { 0x28, 0x20 }, /* DON'T set bit 6. It is for the OV7620 only */
- { 0x29, DFL_AUTO_EXP?0x00:0x80 },
- { 0x2a, 0x10 },
- { 0x2b, 0x00 },
- { 0x2c, 0x88 },
- { 0x2d, 0x95 },
- { 0x2e, 0x80 },
- { 0x2f, 0x44 },
- { 0x60, 0x20 },
- { 0x61, 0x02 },
- { 0x62, 0x5f },
- { 0x63, 0xd5 },
- { 0x64, 0x57 },
- { 0x65, 0x83 }, /* OV says "don't change this value" */
- { 0x66, 0x55 },
- { 0x67, 0x92 },
- { 0x68, 0xcf },
- { 0x69, 0x76 },
- { 0x6a, 0x22 },
- { 0x6b, 0xe2 },
- { 0x6c, 0x40 },
- { 0x6d, 0x48 },
- { 0x6e, 0x80 },
- { 0x6f, 0x0d },
- { 0x70, 0x89 },
- { 0x71, 0x00 },
- { 0x72, 0x14 },
- { 0x73, 0x54 },
- { 0x74, 0xa0 },
- { 0x75, 0x8e },
- { 0x76, 0x00 },
- { 0x77, 0xff },
- { 0x78, 0x80 },
- { 0x79, 0x80 },
- { 0x7a, 0x80 },
- { 0x7b, 0xe6 },
- { 0x7c, 0x00 },
- { 0x24, 0x3a },
- { 0x25, 0x60 },
- { 0xff, 0xff }, /* END MARKER */
-};
-
-/* Settings for (color) OV7620 camera chip */
-static struct ovcamchip_regvals regvals_init_7620[] = {
- { 0x12, 0x80 }, /* reset */
- { 0x00, OV7620_DFL_GAIN },
- { 0x01, 0x80 },
- { 0x02, 0x80 },
- { 0x03, OV7620_DFL_SAT },
- { 0x06, OV7620_DFL_BRIGHT },
- { 0x07, 0x00 },
- { 0x0c, 0x24 },
- { 0x0c, 0x24 },
- { 0x0d, 0x24 },
- { 0x11, 0x01 },
- { 0x12, 0x24 },
- { 0x13, DFL_AUTO_GAIN?0x01:0x00 },
- { 0x14, 0x84 },
- { 0x15, 0x01 },
- { 0x16, 0x03 },
- { 0x17, 0x2f },
- { 0x18, 0xcf },
- { 0x19, 0x06 },
- { 0x1a, 0xf5 },
- { 0x1b, 0x00 },
- { 0x20, 0x18 },
- { 0x21, 0x80 },
- { 0x22, 0x80 },
- { 0x23, 0x00 },
- { 0x26, 0xa2 },
- { 0x27, 0xea },
- { 0x28, 0x20 },
- { 0x29, DFL_AUTO_EXP?0x00:0x80 },
- { 0x2a, 0x10 },
- { 0x2b, 0x00 },
- { 0x2c, 0x88 },
- { 0x2d, 0x91 },
- { 0x2e, 0x80 },
- { 0x2f, 0x44 },
- { 0x60, 0x27 },
- { 0x61, 0x02 },
- { 0x62, 0x5f },
- { 0x63, 0xd5 },
- { 0x64, 0x57 },
- { 0x65, 0x83 },
- { 0x66, 0x55 },
- { 0x67, 0x92 },
- { 0x68, 0xcf },
- { 0x69, 0x76 },
- { 0x6a, 0x22 },
- { 0x6b, 0x00 },
- { 0x6c, 0x02 },
- { 0x6d, 0x44 },
- { 0x6e, 0x80 },
- { 0x6f, 0x1d },
- { 0x70, 0x8b },
- { 0x71, 0x00 },
- { 0x72, 0x14 },
- { 0x73, 0x54 },
- { 0x74, 0x00 },
- { 0x75, 0x8e },
- { 0x76, 0x00 },
- { 0x77, 0xff },
- { 0x78, 0x80 },
- { 0x79, 0x80 },
- { 0x7a, 0x80 },
- { 0x7b, 0xe2 },
- { 0x7c, 0x00 },
- { 0xff, 0xff }, /* END MARKER */
-};
-
-/* Returns index into the specified look-up table, with 'n' elements, for which
- * the value is greater than or equal to "val". If a match isn't found, (n-1)
- * is returned. The entries in the table must be in ascending order. */
-static inline int ov7x20_lut_find(unsigned char lut[], int n, unsigned char val)
-{
- int i = 0;
-
- while (lut[i] < val && i < n)
- i++;
-
- return i;
-}
-
-/* This initializes the OV7x20 camera chip and relevant variables. */
-static int ov7x20_init(struct i2c_client *c)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov7x20 *s;
- int rc;
-
- DDEBUG(4, &c->dev, "entered");
-
- if (ov->mono)
- rc = ov_write_regvals(c, regvals_init_7120);
- else
- rc = ov_write_regvals(c, regvals_init_7620);
-
- if (rc < 0)
- return rc;
-
- ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
- if (!s)
- return -ENOMEM;
-
- s->auto_brt = 1;
- s->auto_exp = DFL_AUTO_EXP;
- s->auto_gain = DFL_AUTO_GAIN;
-
- return 0;
-}
-
-static int ov7x20_free(struct i2c_client *c)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
-
- kfree(ov->spriv);
- return 0;
-}
-
-static int ov7x20_set_v4l1_control(struct i2c_client *c,
- struct ovcamchip_control *ctl)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov7x20 *s = ov->spriv;
- int rc;
- int v = ctl->value;
-
- switch (ctl->id) {
- case OVCAMCHIP_CID_CONT:
- {
- /* Use Y gamma control instead. Bit 0 enables it. */
- rc = ov_write(c, 0x64, ctab[v >> 12]);
- break;
- }
- case OVCAMCHIP_CID_BRIGHT:
- /* 7620 doesn't like manual changes when in auto mode */
- if (!s->auto_brt)
- rc = ov_write(c, REG_BRT, v >> 8);
- else
- rc = 0;
- break;
- case OVCAMCHIP_CID_SAT:
- rc = ov_write(c, REG_SAT, v >> 8);
- break;
- case OVCAMCHIP_CID_EXP:
- if (!s->auto_exp)
- rc = ov_write(c, REG_EXP, v);
- else
- rc = -EBUSY;
- break;
- case OVCAMCHIP_CID_FREQ:
- {
- int sixty = (v == 60);
-
- rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
- if (rc < 0)
- goto out;
-
- rc = ov_write(c, 0x2b, sixty?0x00:0xac);
- if (rc < 0)
- goto out;
-
- rc = ov_write_mask(c, 0x76, 0x01, 0x01);
- break;
- }
- case OVCAMCHIP_CID_BANDFILT:
- rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
- s->bandfilt = v;
- break;
- case OVCAMCHIP_CID_AUTOBRIGHT:
- rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
- s->auto_brt = v;
- break;
- case OVCAMCHIP_CID_AUTOEXP:
- rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
- s->auto_exp = v;
- break;
- case OVCAMCHIP_CID_BACKLIGHT:
- {
- rc = ov_write_mask(c, 0x68, v?0xe0:0xc0, 0xe0);
- if (rc < 0)
- goto out;
-
- rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
- if (rc < 0)
- goto out;
-
- rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02);
- s->backlight = v;
- break;
- }
- case OVCAMCHIP_CID_MIRROR:
- rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
- s->mirror = v;
- break;
- default:
- DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
- return -EPERM;
- }
-
-out:
- DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
- return rc;
-}
-
-static int ov7x20_get_v4l1_control(struct i2c_client *c,
- struct ovcamchip_control *ctl)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- struct ov7x20 *s = ov->spriv;
- int rc = 0;
- unsigned char val = 0;
-
- switch (ctl->id) {
- case OVCAMCHIP_CID_CONT:
- rc = ov_read(c, 0x64, &val);
- ctl->value = ov7x20_lut_find(ctab, 16, val) << 12;
- break;
- case OVCAMCHIP_CID_BRIGHT:
- rc = ov_read(c, REG_BRT, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_SAT:
- rc = ov_read(c, REG_SAT, &val);
- ctl->value = val << 8;
- break;
- case OVCAMCHIP_CID_EXP:
- rc = ov_read(c, REG_EXP, &val);
- ctl->value = val;
- break;
- case OVCAMCHIP_CID_BANDFILT:
- ctl->value = s->bandfilt;
- break;
- case OVCAMCHIP_CID_AUTOBRIGHT:
- ctl->value = s->auto_brt;
- break;
- case OVCAMCHIP_CID_AUTOEXP:
- ctl->value = s->auto_exp;
- break;
- case OVCAMCHIP_CID_BACKLIGHT:
- ctl->value = s->backlight;
- break;
- case OVCAMCHIP_CID_MIRROR:
- ctl->value = s->mirror;
- break;
- default:
- DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
- return -EPERM;
- }
-
- DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
- return rc;
-}
-
-static int ov7x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- int qvga = win->quarter;
-
- /******** QVGA-specific regs ********/
- ov_write_mask(c, 0x14, qvga?0x20:0x00, 0x20);
- ov_write_mask(c, 0x28, qvga?0x00:0x20, 0x20);
- ov_write(c, 0x24, qvga?0x20:0x3a);
- ov_write(c, 0x25, qvga?0x30:0x60);
- ov_write_mask(c, 0x2d, qvga?0x40:0x00, 0x40);
- if (!ov->mono)
- ov_write_mask(c, 0x67, qvga?0xf0:0x90, 0xf0);
- ov_write_mask(c, 0x74, qvga?0x20:0x00, 0x20);
-
- /******** Clock programming ********/
-
- ov_write(c, 0x11, win->clockdiv);
-
- return 0;
-}
-
-static int ov7x20_set_window(struct i2c_client *c, struct ovcamchip_window *win)
-{
- int ret, hwscale, vwscale;
-
- ret = ov7x20_mode_init(c, win);
- if (ret < 0)
- return ret;
-
- if (win->quarter) {
- hwscale = 1;
- vwscale = 0;
- } else {
- hwscale = 2;
- vwscale = 1;
- }
-
- ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
- ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
- ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
- ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
-
- return 0;
-}
-
-static int ov7x20_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
- switch (cmd) {
- case OVCAMCHIP_CMD_S_CTRL:
- return ov7x20_set_v4l1_control(c, arg);
- case OVCAMCHIP_CMD_G_CTRL:
- return ov7x20_get_v4l1_control(c, arg);
- case OVCAMCHIP_CMD_S_MODE:
- return ov7x20_set_window(c, arg);
- default:
- DDEBUG(2, &c->dev, "command not supported: %d", cmd);
- return -ENOIOCTLCMD;
- }
-}
-
-struct ovcamchip_ops ov7x20_ops = {
- .init = ov7x20_init,
- .free = ov7x20_free,
- .command = ov7x20_command,
-};
diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c
deleted file mode 100644
index d573d84..0000000
--- a/drivers/media/video/ovcamchip/ovcamchip_core.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/* Shared Code for OmniVision Camera Chip Drivers
- *
- * Copyright (c) 2004 Mark McClelland <mark@alpha.dyndns.org>
- * http://alpha.dyndns.org/ov511/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- */
-
-#define DEBUG
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-i2c-drv.h>
-#include "ovcamchip_priv.h"
-
-#define DRIVER_VERSION "v2.27 for Linux 2.6"
-#define DRIVER_AUTHOR "Mark McClelland <mark@alpha.dyndns.org>"
-#define DRIVER_DESC "OV camera chip I2C driver"
-
-#define PINFO(fmt, args...) printk(KERN_INFO "ovcamchip: " fmt "\n" , ## args);
-#define PERROR(fmt, args...) printk(KERN_ERR "ovcamchip: " fmt "\n" , ## args);
-
-#ifdef DEBUG
-int ovcamchip_debug = 0;
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug,
- "Debug level: 0=none, 1=inits, 2=warning, 3=config, 4=functions, 5=all");
-#endif
-
-/* By default, let bridge driver tell us if chip is monochrome. mono=0
- * will ignore that and always treat chips as color. mono=1 will force
- * monochrome mode for all chips. */
-static int mono = -1;
-module_param(mono, int, 0);
-MODULE_PARM_DESC(mono,
- "1=chips are monochrome (OVx1xx), 0=force color, -1=autodetect (default)");
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-
-/* Registers common to all chips, that are needed for detection */
-#define GENERIC_REG_ID_HIGH 0x1C /* manufacturer ID MSB */
-#define GENERIC_REG_ID_LOW 0x1D /* manufacturer ID LSB */
-#define GENERIC_REG_COM_I 0x29 /* misc ID bits */
-
-static char *chip_names[NUM_CC_TYPES] = {
- [CC_UNKNOWN] = "Unknown chip",
- [CC_OV76BE] = "OV76BE",
- [CC_OV7610] = "OV7610",
- [CC_OV7620] = "OV7620",
- [CC_OV7620AE] = "OV7620AE",
- [CC_OV6620] = "OV6620",
- [CC_OV6630] = "OV6630",
- [CC_OV6630AE] = "OV6630AE",
- [CC_OV6630AF] = "OV6630AF",
-};
-
-/* ----------------------------------------------------------------------- */
-
-int ov_write_regvals(struct i2c_client *c, struct ovcamchip_regvals *rvals)
-{
- int rc;
-
- while (rvals->reg != 0xff) {
- rc = ov_write(c, rvals->reg, rvals->val);
- if (rc < 0)
- return rc;
- rvals++;
- }
-
- return 0;
-}
-
-/* Writes bits at positions specified by mask to an I2C reg. Bits that are in
- * the same position as 1's in "mask" are cleared and set to "value". Bits
- * that are in the same position as 0's in "mask" are preserved, regardless
- * of their respective state in "value".
- */
-int ov_write_mask(struct i2c_client *c,
- unsigned char reg,
- unsigned char value,
- unsigned char mask)
-{
- int rc;
- unsigned char oldval, newval;
-
- if (mask == 0xff) {
- newval = value;
- } else {
- rc = ov_read(c, reg, &oldval);
- if (rc < 0)
- return rc;
-
- oldval &= (~mask); /* Clear the masked bits */
- value &= mask; /* Enforce mask on value */
- newval = oldval | value; /* Set the desired bits */
- }
-
- return ov_write(c, reg, newval);
-}
-
-/* ----------------------------------------------------------------------- */
-
-/* Reset the chip and ensure that I2C is synchronized. Returns <0 if failure.
- */
-static int init_camchip(struct i2c_client *c)
-{
- int i, success;
- unsigned char high, low;
-
- /* Reset the chip */
- ov_write(c, 0x12, 0x80);
-
- /* Wait for it to initialize */
- msleep(150);
-
- for (i = 0, success = 0; i < I2C_DETECT_RETRIES && !success; i++) {
- if (ov_read(c, GENERIC_REG_ID_HIGH, &high) >= 0) {
- if (ov_read(c, GENERIC_REG_ID_LOW, &low) >= 0) {
- if (high == 0x7F && low == 0xA2) {
- success = 1;
- continue;
- }
- }
- }
-
- /* Reset the chip */
- ov_write(c, 0x12, 0x80);
-
- /* Wait for it to initialize */
- msleep(150);
-
- /* Dummy read to sync I2C */
- ov_read(c, 0x00, &low);
- }
-
- if (!success)
- return -EIO;
-
- PDEBUG(1, "I2C synced in %d attempt(s)", i);
-
- return 0;
-}
-
-/* This detects the OV7610, OV7620, or OV76BE chip. */
-static int ov7xx0_detect(struct i2c_client *c)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- int rc;
- unsigned char val;
-
- PDEBUG(4, "");
-
- /* Detect chip (sub)type */
- rc = ov_read(c, GENERIC_REG_COM_I, &val);
- if (rc < 0) {
- PERROR("Error detecting ov7xx0 type");
- return rc;
- }
-
- if ((val & 3) == 3) {
- PINFO("Camera chip is an OV7610");
- ov->subtype = CC_OV7610;
- } else if ((val & 3) == 1) {
- rc = ov_read(c, 0x15, &val);
- if (rc < 0) {
- PERROR("Error detecting ov7xx0 type");
- return rc;
- }
-
- if (val & 1) {
- PINFO("Camera chip is an OV7620AE");
- /* OV7620 is a close enough match for now. There are
- * some definite differences though, so this should be
- * fixed */
- ov->subtype = CC_OV7620;
- } else {
- PINFO("Camera chip is an OV76BE");
- ov->subtype = CC_OV76BE;
- }
- } else if ((val & 3) == 0) {
- PINFO("Camera chip is an OV7620");
- ov->subtype = CC_OV7620;
- } else {
- PERROR("Unknown camera chip version: %d", val & 3);
- return -ENOSYS;
- }
-
- if (ov->subtype == CC_OV76BE)
- ov->sops = &ov76be_ops;
- else if (ov->subtype == CC_OV7620)
- ov->sops = &ov7x20_ops;
- else
- ov->sops = &ov7x10_ops;
-
- return 0;
-}
-
-/* This detects the OV6620, OV6630, OV6630AE, or OV6630AF chip. */
-static int ov6xx0_detect(struct i2c_client *c)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- int rc;
- unsigned char val;
-
- PDEBUG(4, "");
-
- /* Detect chip (sub)type */
- rc = ov_read(c, GENERIC_REG_COM_I, &val);
- if (rc < 0) {
- PERROR("Error detecting ov6xx0 type");
- return -1;
- }
-
- if ((val & 3) == 0) {
- ov->subtype = CC_OV6630;
- PINFO("Camera chip is an OV6630");
- } else if ((val & 3) == 1) {
- ov->subtype = CC_OV6620;
- PINFO("Camera chip is an OV6620");
- } else if ((val & 3) == 2) {
- ov->subtype = CC_OV6630;
- PINFO("Camera chip is an OV6630AE");
- } else if ((val & 3) == 3) {
- ov->subtype = CC_OV6630;
- PINFO("Camera chip is an OV6630AF");
- }
-
- if (ov->subtype == CC_OV6620)
- ov->sops = &ov6x20_ops;
- else
- ov->sops = &ov6x30_ops;
-
- return 0;
-}
-
-static int ovcamchip_detect(struct i2c_client *c)
-{
- /* Ideally we would just try a single register write and see if it NAKs.
- * That isn't possible since the OV518 can't report I2C transaction
- * failures. So, we have to try to initialize the chip (i.e. reset it
- * and check the ID registers) to detect its presence. */
-
- /* Test for 7xx0 */
- PDEBUG(3, "Testing for 0V7xx0");
- if (init_camchip(c) < 0)
- return -ENODEV;
- /* 7-bit addresses with bit 0 set are for the OV7xx0 */
- if (c->addr & 1) {
- if (ov7xx0_detect(c) < 0) {
- PERROR("Failed to init OV7xx0");
- return -EIO;
- }
- return 0;
- }
- /* Test for 6xx0 */
- PDEBUG(3, "Testing for 0V6xx0");
- if (ov6xx0_detect(c) < 0) {
- PERROR("Failed to init OV6xx0");
- return -EIO;
- }
- return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static long ovcamchip_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
-{
- struct ovcamchip *ov = to_ovcamchip(sd);
- struct i2c_client *c = v4l2_get_subdevdata(sd);
-
- if (!ov->initialized &&
- cmd != OVCAMCHIP_CMD_Q_SUBTYPE &&
- cmd != OVCAMCHIP_CMD_INITIALIZE) {
- v4l2_err(sd, "Camera chip not initialized yet!\n");
- return -EPERM;
- }
-
- switch (cmd) {
- case OVCAMCHIP_CMD_Q_SUBTYPE:
- {
- *(int *)arg = ov->subtype;
- return 0;
- }
- case OVCAMCHIP_CMD_INITIALIZE:
- {
- int rc;
-
- if (mono == -1)
- ov->mono = *(int *)arg;
- else
- ov->mono = mono;
-
- if (ov->mono) {
- if (ov->subtype != CC_OV7620)
- v4l2_warn(sd, "Monochrome not "
- "implemented for this chip\n");
- else
- v4l2_info(sd, "Initializing chip as "
- "monochrome\n");
- }
-
- rc = ov->sops->init(c);
- if (rc < 0)
- return rc;
-
- ov->initialized = 1;
- return 0;
- }
- default:
- return ov->sops->command(c, cmd, arg);
- }
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops ovcamchip_core_ops = {
- .ioctl = ovcamchip_ioctl,
-};
-
-static const struct v4l2_subdev_ops ovcamchip_ops = {
- .core = &ovcamchip_core_ops,
-};
-
-static int ovcamchip_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct ovcamchip *ov;
- struct v4l2_subdev *sd;
- int rc = 0;
-
- ov = kzalloc(sizeof *ov, GFP_KERNEL);
- if (!ov) {
- rc = -ENOMEM;
- goto no_ov;
- }
- sd = &ov->sd;
- v4l2_i2c_subdev_init(sd, client, &ovcamchip_ops);
-
- rc = ovcamchip_detect(client);
- if (rc < 0)
- goto error;
-
- v4l_info(client, "%s found @ 0x%02x (%s)\n",
- chip_names[ov->subtype], client->addr << 1, client->adapter->name);
-
- PDEBUG(1, "Camera chip detection complete");
-
- return rc;
-error:
- kfree(ov);
-no_ov:
- PDEBUG(1, "returning %d", rc);
- return rc;
-}
-
-static int ovcamchip_remove(struct i2c_client *client)
-{
- struct v4l2_subdev *sd = i2c_get_clientdata(client);
- struct ovcamchip *ov = to_ovcamchip(sd);
- int rc;
-
- v4l2_device_unregister_subdev(sd);
- rc = ov->sops->free(client);
- if (rc < 0)
- return rc;
-
- kfree(ov);
- return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id ovcamchip_id[] = {
- { "ovcamchip", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, ovcamchip_id);
-
-static struct v4l2_i2c_driver_data v4l2_i2c_data = {
- .name = "ovcamchip",
- .probe = ovcamchip_probe,
- .remove = ovcamchip_remove,
- .id_table = ovcamchip_id,
-};
diff --git a/drivers/media/video/ovcamchip/ovcamchip_priv.h b/drivers/media/video/ovcamchip/ovcamchip_priv.h
deleted file mode 100644
index 4f07b78..0000000
--- a/drivers/media/video/ovcamchip/ovcamchip_priv.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* OmniVision* camera chip driver private definitions for core code and
- * chip-specific code
- *
- * Copyright (c) 1999-2004 Mark McClelland
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- *
- * * OmniVision is a trademark of OmniVision Technologies, Inc. This driver
- * is not sponsored or developed by them.
- */
-
-#ifndef __LINUX_OVCAMCHIP_PRIV_H
-#define __LINUX_OVCAMCHIP_PRIV_H
-
-#include <linux/i2c.h>
-#include <media/v4l2-subdev.h>
-#include <media/ovcamchip.h>
-
-#ifdef DEBUG
-extern int ovcamchip_debug;
-#endif
-
-#define PDEBUG(level, fmt, args...) \
- if (ovcamchip_debug >= (level)) pr_debug("[%s:%d] " fmt "\n", \
- __func__, __LINE__ , ## args)
-
-#define DDEBUG(level, dev, fmt, args...) \
- if (ovcamchip_debug >= (level)) dev_dbg(dev, "[%s:%d] " fmt "\n", \
- __func__, __LINE__ , ## args)
-
-/* Number of times to retry chip detection. Increase this if you are getting
- * "Failed to init camera chip" */
-#define I2C_DETECT_RETRIES 10
-
-struct ovcamchip_regvals {
- unsigned char reg;
- unsigned char val;
-};
-
-struct ovcamchip_ops {
- int (*init)(struct i2c_client *);
- int (*free)(struct i2c_client *);
- int (*command)(struct i2c_client *, unsigned int, void *);
-};
-
-struct ovcamchip {
- struct v4l2_subdev sd;
- struct ovcamchip_ops *sops;
- void *spriv; /* Private data for OV7x10.c etc... */
- int subtype; /* = SEN_OV7610 etc... */
- int mono; /* Monochrome chip? (invalid until init) */
- int initialized; /* OVCAMCHIP_CMD_INITIALIZE was successful */
-};
-
-static inline struct ovcamchip *to_ovcamchip(struct v4l2_subdev *sd)
-{
- return container_of(sd, struct ovcamchip, sd);
-}
-
-extern struct ovcamchip_ops ov6x20_ops;
-extern struct ovcamchip_ops ov6x30_ops;
-extern struct ovcamchip_ops ov7x10_ops;
-extern struct ovcamchip_ops ov7x20_ops;
-extern struct ovcamchip_ops ov76be_ops;
-
-/* --------------------------------- */
-/* I2C I/O */
-/* --------------------------------- */
-
-static inline int ov_read(struct i2c_client *c, unsigned char reg,
- unsigned char *value)
-{
- int rc;
-
- rc = i2c_smbus_read_byte_data(c, reg);
- *value = (unsigned char) rc;
- return rc;
-}
-
-static inline int ov_write(struct i2c_client *c, unsigned char reg,
- unsigned char value )
-{
- return i2c_smbus_write_byte_data(c, reg, value);
-}
-
-/* --------------------------------- */
-/* FUNCTION PROTOTYPES */
-/* --------------------------------- */
-
-/* Functions in ovcamchip_core.c */
-
-extern int ov_write_regvals(struct i2c_client *c,
- struct ovcamchip_regvals *rvals);
-
-extern int ov_write_mask(struct i2c_client *c, unsigned char reg,
- unsigned char value, unsigned char mask);
-
-#endif
--
1.6.5.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 5/6] Remove obsolete stv680 v4l1 driver
2010-05-28 17:02 [PATCH 0/6] Remove some obsolete drivers for 2.6.35 Amerigo Wang
` (3 preceding siblings ...)
2010-05-28 17:03 ` [PATCH 4/6] Remove obsolete ovcamchip sensor framework Amerigo Wang
@ 2010-05-28 17:03 ` Amerigo Wang
2010-05-28 17:03 ` [PATCH 6/6] Remove obsolete zc0301 v4l driver Amerigo Wang
5 siblings, 0 replies; 9+ messages in thread
From: Amerigo Wang @ 2010-05-28 17:03 UTC (permalink / raw)
To: linux-media; +Cc: Hans de Goede, Amerigo Wang
From: Amerigo Wang <amwang@redhat.com>
Date: Fri, 28 May 2010 17:49:57 +0800
Subject: [PATCH 5/6] Remove obsolete stv680 v4l1 driver
obsolete v4l1 driver replaced by gspca_stv0680
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Amerigo Wang <amwang@redhat.com>
---
Documentation/feature-removal-schedule.txt | 8 -
drivers/media/video/Kconfig | 17 -
drivers/media/video/Makefile | 1 -
drivers/media/video/stv680.c | 1565 ----------------------------
drivers/media/video/stv680.h | 227 ----
5 files changed, 0 insertions(+), 1818 deletions(-)
delete mode 100644 drivers/media/video/stv680.c
delete mode 100644 drivers/media/video/stv680.h
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 42bb6e6..5a29615 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -459,14 +459,6 @@ Who: Corentin Chary <corentin.chary@gmail.com>
----------------------------
-What: stv680 v4l1 driver
-When: 2.6.35
-Files: drivers/media/video/stv680.[ch]
-Why: obsolete v4l1 driver replaced by gspca_stv0680
-Who: Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
What: zc0301 v4l driver
When: 2.6.35
Files: drivers/media/video/zc0301/*
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index de12f93..4361fe6 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -1013,23 +1013,6 @@ config USB_SE401
source "drivers/media/video/sn9c102/Kconfig"
-config USB_STV680
- tristate "USB STV680 (Pencam) Camera support (DEPRECATED)"
- depends on VIDEO_V4L1
- default n
- ---help---
- This driver is DEPRECATED please use the gspca stv0680 module
- instead. Note that for the gspca stv0680 module you need
- atleast version 0.6.3 of libv4l.
-
- Say Y here if you want to connect this type of camera to your
- computer's USB port. This includes the Pencam line of cameras.
- See <file:Documentation/video4linux/stv680.txt> for more information
- and for a list of supported cameras.
-
- To compile this driver as a module, choose M here: the
- module will be called stv680.
-
source "drivers/media/video/zc0301/Kconfig"
source "drivers/media/video/pwc/Kconfig"
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index e3603b4..5c2a38e 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -127,7 +127,6 @@ obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
obj-$(CONFIG_USB_DABUSB) += dabusb.o
obj-$(CONFIG_USB_SE401) += se401.o
-obj-$(CONFIG_USB_STV680) += stv680.o
obj-$(CONFIG_USB_ZR364XX) += zr364xx.o
obj-$(CONFIG_USB_STKWEBCAM) += stkwebcam.o
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
deleted file mode 100644
index 5938ad8..0000000
--- a/drivers/media/video/stv680.c
+++ /dev/null
@@ -1,1565 +0,0 @@
-/*
- * STV0680 USB Camera Driver, by Kevin Sisson (kjsisson@bellsouth.net)
- *
- * Thanks to STMicroelectronics for information on the usb commands, and
- * to Steve Miller at STM for his help and encouragement while I was
- * writing this driver.
- *
- * This driver is based heavily on the
- * Endpoints (formerly known as AOX) se401 USB Camera Driver
- * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
- *
- * Still somewhat based on the Linux ov511 driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * History:
- * ver 0.1 October, 2001. Initial attempt.
- *
- * ver 0.2 November, 2001. Fixed asbility to resize, added brightness
- * function, made more stable (?)
- *
- * ver 0.21 Nov, 2001. Added gamma correction and white balance,
- * due to Alexander Schwartz. Still trying to
- * improve stablility. Moved stuff into stv680.h
- *
- * ver 0.22 Nov, 2001. Added sharpen function (by Michael Sweet,
- * mike@easysw.com) from GIMP, also used in pencam.
- * Simple, fast, good integer math routine.
- *
- * ver 0.23 Dec, 2001 (gkh)
- * Took out sharpen function, ran code through
- * Lindent, and did other minor tweaks to get
- * things to work properly with 2.5.1
- *
- * ver 0.24 Jan, 2002 (kjs)
- * Fixed the problem with webcam crashing after
- * two pictures. Changed the way pic is halved to
- * improve quality. Got rid of green line around
- * frame. Fix brightness reset when changing size
- * bug. Adjusted gamma filters slightly.
- *
- * ver 0.25 Jan, 2002 (kjs)
- * Fixed a bug in which the driver sometimes attempted
- * to set to a non-supported size. This allowed
- * gnomemeeting to work.
- * Fixed proc entry removal bug.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
-#include <linux/pagemap.h>
-#include <linux/errno.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/usb.h>
-#include <linux/mutex.h>
-
-#include "stv680.h"
-
-static int video_nr = -1;
-
-static int swapRGB; /* 0 = default for auto select */
-
-/* 0 = default to allow auto select; -1 = swap never, +1 = swap always */
-static int swapRGB_on;
-
-static unsigned int debug;
-
-#define PDEBUG(level, fmt, args...) \
- do { \
- if (debug >= level) \
- printk(KERN_INFO KBUILD_MODNAME " [%s:%d] \n" fmt, \
- __func__, __LINE__ , ## args); \
- } while (0)
-
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.25"
-#define DRIVER_AUTHOR "Kevin Sisson <kjsisson@bellsouth.net>"
-#define DRIVER_DESC "STV0680 USB Camera Driver"
-
-MODULE_AUTHOR (DRIVER_AUTHOR);
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE ("GPL");
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC (debug, "Debug enabled or not");
-module_param(swapRGB_on, int, 0);
-MODULE_PARM_DESC (swapRGB_on, "Red/blue swap: 1=always, 0=auto, -1=never");
-module_param(video_nr, int, 0);
-
-/********************************************************************
- *
- * Memory management
- *
- * This is a shameless copy from the USB-cpia driver (linux kernel
- * version 2.3.29 or so, I have no idea what this code actually does ;).
- * Actually it seems to be a copy of a shameless copy of the bttv-driver.
- * Or that is a copy of a shameless copy of ... (To the powers: is there
- * no generic kernel-function to do this sort of stuff?)
- *
- * Yes, it was a shameless copy from the bttv-driver. IIRC, Alan says
- * there will be one, but apparentely not yet -jerdfelt
- *
- * So I copied it again for the ov511 driver -claudio
- *
- * Same for the se401 driver -Jeroen
- *
- * And the STV0680 driver - Kevin
- ********************************************************************/
-static void *rvmalloc (unsigned long size)
-{
- void *mem;
- unsigned long adr;
-
- size = PAGE_ALIGN(size);
- mem = vmalloc_32 (size);
- if (!mem)
- return NULL;
-
- memset (mem, 0, size); /* Clear the ram out, no junk to the user */
- adr = (unsigned long) mem;
- while (size > 0) {
- SetPageReserved(vmalloc_to_page((void *)adr));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
- return mem;
-}
-
-static void rvfree (void *mem, unsigned long size)
-{
- unsigned long adr;
-
- if (!mem)
- return;
-
- adr = (unsigned long) mem;
- while ((long) size > 0) {
- ClearPageReserved(vmalloc_to_page((void *)adr));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
- vfree (mem);
-}
-
-
-/*********************************************************************
- * pencam read/write functions
- ********************************************************************/
-
-static int stv_sndctrl (int set, struct usb_stv *stv680, unsigned short req, unsigned short value, unsigned char *buffer, int size)
-{
- int ret = -1;
-
- switch (set) {
- case 0: /* 0xc1 */
- ret = usb_control_msg (stv680->udev,
- usb_rcvctrlpipe (stv680->udev, 0),
- req,
- (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT),
- value, 0, buffer, size, PENCAM_TIMEOUT);
- break;
-
- case 1: /* 0x41 */
- ret = usb_control_msg (stv680->udev,
- usb_sndctrlpipe (stv680->udev, 0),
- req,
- (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT),
- value, 0, buffer, size, PENCAM_TIMEOUT);
- break;
-
- case 2: /* 0x80 */
- ret = usb_control_msg (stv680->udev,
- usb_rcvctrlpipe (stv680->udev, 0),
- req,
- (USB_DIR_IN | USB_RECIP_DEVICE),
- value, 0, buffer, size, PENCAM_TIMEOUT);
- break;
-
- case 3: /* 0x40 */
- ret = usb_control_msg (stv680->udev,
- usb_sndctrlpipe (stv680->udev, 0),
- req,
- (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE),
- value, 0, buffer, size, PENCAM_TIMEOUT);
- break;
-
- }
- if ((ret < 0) && (req != 0x0a)) {
- PDEBUG (1, "STV(e): usb_control_msg error %i, request = 0x%x, error = %i", set, req, ret);
- }
- return ret;
-}
-
-static int stv_set_config (struct usb_stv *dev, int configuration, int interface, int alternate)
-{
-
- if (configuration != dev->udev->actconfig->desc.bConfigurationValue
- || usb_reset_configuration (dev->udev) < 0) {
- PDEBUG (1, "STV(e): FAILED to reset configuration %i", configuration);
- return -1;
- }
- if (usb_set_interface (dev->udev, interface, alternate) < 0) {
- PDEBUG (1, "STV(e): FAILED to set alternate interface %i", alternate);
- return -1;
- }
- return 0;
-}
-
-static int stv_stop_video (struct usb_stv *dev)
-{
- int i;
- unsigned char *buf;
-
- buf = kmalloc (40, GFP_KERNEL);
- if (buf == NULL) {
- PDEBUG (0, "STV(e): Out of (small buf) memory");
- return -1;
- }
-
- /* this is a high priority command; it stops all lower order commands */
- if ((i = stv_sndctrl (1, dev, 0x04, 0x0000, buf, 0x0)) < 0) {
- i = stv_sndctrl (0, dev, 0x80, 0, buf, 0x02); /* Get Last Error; 2 = busy */
- PDEBUG (1, "STV(i): last error: %i, command = 0x%x", buf[0], buf[1]);
- } else {
- PDEBUG (1, "STV(i): Camera reset to idle mode.");
- }
-
- if ((i = stv_set_config (dev, 1, 0, 0)) < 0)
- PDEBUG (1, "STV(e): Reset config during exit failed");
-
- /* get current mode */
- buf[0] = 0xf0;
- if ((i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08)) != 0x08) /* get mode */
- PDEBUG (0, "STV(e): Stop_video: problem setting original mode");
- if (dev->origMode != buf[0]) {
- memset (buf, 0, 8);
- buf[0] = (unsigned char) dev->origMode;
- if ((i = stv_sndctrl (3, dev, 0x07, 0x0100, buf, 0x08)) != 0x08) {
- PDEBUG (0, "STV(e): Stop_video: Set_Camera_Mode failed");
- i = -1;
- }
- buf[0] = 0xf0;
- i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08);
- if ((i != 0x08) || (buf[0] != dev->origMode)) {
- PDEBUG (0, "STV(e): camera NOT set to original resolution.");
- i = -1;
- } else
- PDEBUG (0, "STV(i): Camera set to original resolution");
- }
- /* origMode */
- kfree(buf);
- return i;
-}
-
-static int stv_set_video_mode (struct usb_stv *dev)
-{
- int i, stop_video = 1;
- unsigned char *buf;
-
- buf = kmalloc (40, GFP_KERNEL);
- if (buf == NULL) {
- PDEBUG (0, "STV(e): Out of (small buf) memory");
- return -1;
- }
-
- if ((i = stv_set_config (dev, 1, 0, 0)) < 0) {
- kfree(buf);
- return i;
- }
-
- i = stv_sndctrl (2, dev, 0x06, 0x0100, buf, 0x12);
- if (!(i > 0) && (buf[8] == 0x53) && (buf[9] == 0x05)) {
- PDEBUG (1, "STV(e): Could not get descriptor 0100.");
- goto error;
- }
-
- /* set alternate interface 1 */
- if ((i = stv_set_config (dev, 1, 0, 1)) < 0)
- goto error;
-
- if ((i = stv_sndctrl (0, dev, 0x85, 0, buf, 0x10)) != 0x10)
- goto error;
- PDEBUG (1, "STV(i): Setting video mode.");
- /* Switch to Video mode: 0x0100 = VGA (640x480), 0x0000 = CIF (352x288) 0x0300 = QVGA (320x240) */
- if ((i = stv_sndctrl (1, dev, 0x09, dev->VideoMode, buf, 0x0)) < 0) {
- stop_video = 0;
- goto error;
- }
- goto exit;
-
-error:
- kfree(buf);
- if (stop_video == 1)
- stv_stop_video (dev);
- return -1;
-
-exit:
- kfree(buf);
- return 0;
-}
-
-static int stv_init (struct usb_stv *stv680)
-{
- int i = 0;
- unsigned char *buffer;
- unsigned long int bufsize;
-
- buffer = kzalloc (40, GFP_KERNEL);
- if (buffer == NULL) {
- PDEBUG (0, "STV(e): Out of (small buf) memory");
- return -1;
- }
- udelay (100);
-
- /* set config 1, interface 0, alternate 0 */
- if ((i = stv_set_config (stv680, 1, 0, 0)) < 0) {
- kfree(buffer);
- PDEBUG (0, "STV(e): set config 1,0,0 failed");
- return -1;
- }
- /* ping camera to be sure STV0680 is present */
- if ((i = stv_sndctrl (0, stv680, 0x88, 0x5678, buffer, 0x02)) != 0x02)
- goto error;
- if ((buffer[0] != 0x56) || (buffer[1] != 0x78)) {
- PDEBUG (1, "STV(e): camera ping failed!!");
- goto error;
- }
-
- /* get camera descriptor */
- if ((i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x09)) != 0x09)
- goto error;
- i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x22);
- if (!(i >= 0) && (buffer[7] == 0xa0) && (buffer[8] == 0x23)) {
- PDEBUG (1, "STV(e): Could not get descriptor 0200.");
- goto error;
- }
- if ((i = stv_sndctrl (0, stv680, 0x8a, 0, buffer, 0x02)) != 0x02)
- goto error;
- if ((i = stv_sndctrl (0, stv680, 0x8b, 0, buffer, 0x24)) != 0x24)
- goto error;
- if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10)
- goto error;
-
- stv680->SupportedModes = buffer[7];
- i = stv680->SupportedModes;
- stv680->CIF = 0;
- stv680->VGA = 0;
- stv680->QVGA = 0;
- if (i & 1)
- stv680->CIF = 1;
- if (i & 2)
- stv680->VGA = 1;
- if (i & 8)
- stv680->QVGA = 1;
- if (stv680->SupportedModes == 0) {
- PDEBUG (0, "STV(e): There are NO supported STV680 modes!!");
- i = -1;
- goto error;
- } else {
- if (stv680->CIF)
- PDEBUG (0, "STV(i): CIF is supported");
- if (stv680->QVGA)
- PDEBUG (0, "STV(i): QVGA is supported");
- }
- /* FW rev, ASIC rev, sensor ID */
- PDEBUG (1, "STV(i): Firmware rev is %i.%i", buffer[0], buffer[1]);
- PDEBUG (1, "STV(i): ASIC rev is %i.%i", buffer[2], buffer[3]);
- PDEBUG (1, "STV(i): Sensor ID is %i", (buffer[4]*16) + (buffer[5]>>4));
-
- /* set alternate interface 1 */
- if ((i = stv_set_config (stv680, 1, 0, 1)) < 0)
- goto error;
-
- if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10)
- goto error;
- if ((i = stv_sndctrl (0, stv680, 0x8d, 0, buffer, 0x08)) != 0x08)
- goto error;
- i = buffer[3];
- PDEBUG (0, "STV(i): Camera has %i pictures.", i);
-
- /* get current mode */
- if ((i = stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08)) != 0x08)
- goto error;
- stv680->origMode = buffer[0]; /* 01 = VGA, 03 = QVGA, 00 = CIF */
-
- /* This will attemp CIF mode, if supported. If not, set to QVGA */
- memset (buffer, 0, 8);
- if (stv680->CIF)
- buffer[0] = 0x00;
- else if (stv680->QVGA)
- buffer[0] = 0x03;
- if ((i = stv_sndctrl (3, stv680, 0x07, 0x0100, buffer, 0x08)) != 0x08) {
- PDEBUG (0, "STV(i): Set_Camera_Mode failed");
- i = -1;
- goto error;
- }
- buffer[0] = 0xf0;
- stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08);
- if (((stv680->CIF == 1) && (buffer[0] != 0x00)) || ((stv680->QVGA == 1) && (buffer[0] != 0x03))) {
- PDEBUG (0, "STV(e): Error setting camera video mode!");
- i = -1;
- goto error;
- } else {
- if (buffer[0] == 0) {
- stv680->VideoMode = 0x0000;
- PDEBUG (0, "STV(i): Video Mode set to CIF");
- }
- if (buffer[0] == 0x03) {
- stv680->VideoMode = 0x0300;
- PDEBUG (0, "STV(i): Video Mode set to QVGA");
- }
- }
- if ((i = stv_sndctrl (0, stv680, 0x8f, 0, buffer, 0x10)) != 0x10)
- goto error;
- bufsize = (buffer[0] << 24) | (buffer[1] << 16) | (buffer[2] << 8) | (buffer[3]);
- stv680->cwidth = (buffer[4] << 8) | (buffer[5]); /* ->camera = 322, 356, 644 */
- stv680->cheight = (buffer[6] << 8) | (buffer[7]); /* ->camera = 242, 292, 484 */
- stv680->origGain = buffer[12];
-
- goto exit;
-
-error:
- i = stv_sndctrl (0, stv680, 0x80, 0, buffer, 0x02); /* Get Last Error */
- PDEBUG (1, "STV(i): last error: %i, command = 0x%x", buffer[0], buffer[1]);
- kfree(buffer);
- return -1;
-
-exit:
- kfree(buffer);
-
- /* video = 320x240, 352x288 */
- if (stv680->CIF == 1) {
- stv680->maxwidth = 352;
- stv680->maxheight = 288;
- stv680->vwidth = 352;
- stv680->vheight = 288;
- }
- if (stv680->QVGA == 1) {
- stv680->maxwidth = 320;
- stv680->maxheight = 240;
- stv680->vwidth = 320;
- stv680->vheight = 240;
- }
-
- stv680->rawbufsize = bufsize; /* must be ./. by 8 */
- stv680->maxframesize = bufsize * 3; /* RGB size */
- PDEBUG (2, "STV(i): cwidth = %i, cheight = %i", stv680->cwidth, stv680->cheight);
- PDEBUG (1, "STV(i): width = %i, height = %i, rawbufsize = %li", stv680->vwidth, stv680->vheight, stv680->rawbufsize);
-
- /* some default values */
- stv680->bulk_in_endpointAddr = 0x82;
- stv680->dropped = 0;
- stv680->error = 0;
- stv680->framecount = 0;
- stv680->readcount = 0;
- stv680->streaming = 0;
- /* bright, white, colour, hue, contrast are set by software, not in stv0680 */
- stv680->brightness = 32767;
- stv680->chgbright = 0;
- stv680->whiteness = 0; /* only for greyscale */
- stv680->colour = 32767;
- stv680->contrast = 32767;
- stv680->hue = 32767;
- stv680->palette = STV_VIDEO_PALETTE;
- stv680->depth = 24; /* rgb24 bits */
- if ((swapRGB_on == 0) && (swapRGB == 0))
- PDEBUG (1, "STV(i): swapRGB is (auto) OFF");
- else if ((swapRGB_on == 0) && (swapRGB == 1))
- PDEBUG (1, "STV(i): swapRGB is (auto) ON");
- else if (swapRGB_on == 1)
- PDEBUG (1, "STV(i): swapRGB is (forced) ON");
- else if (swapRGB_on == -1)
- PDEBUG (1, "STV(i): swapRGB is (forced) OFF");
-
- if (stv_set_video_mode (stv680) < 0) {
- PDEBUG (0, "STV(e): Could not set video mode in stv_init");
- return -1;
- }
-
- return 0;
-}
-
-/***************** last of pencam routines *******************/
-
-/****************************************************************************
- * sysfs
- ***************************************************************************/
-#define stv680_file(name, variable, field) \
-static ssize_t show_##name(struct device *class_dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- struct video_device *vdev = to_video_device(class_dev); \
- struct usb_stv *stv = video_get_drvdata(vdev); \
- return sprintf(buf, field, stv->variable); \
-} \
-static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL);
-
-stv680_file(model, camera_name, "%s\n");
-stv680_file(in_use, user, "%d\n");
-stv680_file(streaming, streaming, "%d\n");
-stv680_file(palette, palette, "%i\n");
-stv680_file(frames_total, readcount, "%d\n");
-stv680_file(frames_read, framecount, "%d\n");
-stv680_file(packets_dropped, dropped, "%d\n");
-stv680_file(decoding_errors, error, "%d\n");
-
-static int stv680_create_sysfs_files(struct video_device *vdev)
-{
- int rc;
-
- rc = device_create_file(&vdev->dev, &dev_attr_model);
- if (rc) goto err;
- rc = device_create_file(&vdev->dev, &dev_attr_in_use);
- if (rc) goto err_model;
- rc = device_create_file(&vdev->dev, &dev_attr_streaming);
- if (rc) goto err_inuse;
- rc = device_create_file(&vdev->dev, &dev_attr_palette);
- if (rc) goto err_stream;
- rc = device_create_file(&vdev->dev, &dev_attr_frames_total);
- if (rc) goto err_pal;
- rc = device_create_file(&vdev->dev, &dev_attr_frames_read);
- if (rc) goto err_framtot;
- rc = device_create_file(&vdev->dev, &dev_attr_packets_dropped);
- if (rc) goto err_framread;
- rc = device_create_file(&vdev->dev, &dev_attr_decoding_errors);
- if (rc) goto err_dropped;
-
- return 0;
-
-err_dropped:
- device_remove_file(&vdev->dev, &dev_attr_packets_dropped);
-err_framread:
- device_remove_file(&vdev->dev, &dev_attr_frames_read);
-err_framtot:
- device_remove_file(&vdev->dev, &dev_attr_frames_total);
-err_pal:
- device_remove_file(&vdev->dev, &dev_attr_palette);
-err_stream:
- device_remove_file(&vdev->dev, &dev_attr_streaming);
-err_inuse:
- device_remove_file(&vdev->dev, &dev_attr_in_use);
-err_model:
- device_remove_file(&vdev->dev, &dev_attr_model);
-err:
- PDEBUG(0, "STV(e): Could not create sysfs files");
- return rc;
-}
-
-static void stv680_remove_sysfs_files(struct video_device *vdev)
-{
- device_remove_file(&vdev->dev, &dev_attr_model);
- device_remove_file(&vdev->dev, &dev_attr_in_use);
- device_remove_file(&vdev->dev, &dev_attr_streaming);
- device_remove_file(&vdev->dev, &dev_attr_palette);
- device_remove_file(&vdev->dev, &dev_attr_frames_total);
- device_remove_file(&vdev->dev, &dev_attr_frames_read);
- device_remove_file(&vdev->dev, &dev_attr_packets_dropped);
- device_remove_file(&vdev->dev, &dev_attr_decoding_errors);
-}
-
-/********************************************************************
- * Camera control
- *******************************************************************/
-
-static int stv680_get_pict (struct usb_stv *stv680, struct video_picture *p)
-{
- /* This sets values for v4l interface. max/min = 65535/0 */
-
- p->brightness = stv680->brightness;
- p->whiteness = stv680->whiteness; /* greyscale */
- p->colour = stv680->colour;
- p->contrast = stv680->contrast;
- p->hue = stv680->hue;
- p->palette = stv680->palette;
- p->depth = stv680->depth;
- return 0;
-}
-
-static int stv680_set_pict (struct usb_stv *stv680, struct video_picture *p)
-{
- /* See above stv680_get_pict */
-
- if (p->palette != STV_VIDEO_PALETTE) {
- PDEBUG (2, "STV(e): Palette set error in _set_pic");
- return 1;
- }
-
- if (stv680->brightness != p->brightness) {
- stv680->chgbright = 1;
- stv680->brightness = p->brightness;
- }
-
- stv680->whiteness = p->whiteness; /* greyscale */
- stv680->colour = p->colour;
- stv680->contrast = p->contrast;
- stv680->hue = p->hue;
- stv680->palette = p->palette;
- stv680->depth = p->depth;
-
- return 0;
-}
-
-static void stv680_video_irq (struct urb *urb)
-{
- struct usb_stv *stv680 = urb->context;
- int length = urb->actual_length;
-
- if (length < stv680->rawbufsize)
- PDEBUG (2, "STV(i): Lost data in transfer: exp %li, got %i", stv680->rawbufsize, length);
-
- /* ohoh... */
- if (!stv680->streaming)
- return;
-
- if (!stv680->udev) {
- PDEBUG (0, "STV(e): device vapourished in video_irq");
- return;
- }
-
- /* 0 sized packets happen if we are to fast, but sometimes the camera
- keeps sending them forever...
- */
- if (length && !urb->status) {
- stv680->nullpackets = 0;
- switch (stv680->scratch[stv680->scratch_next].state) {
- case BUFFER_READY:
- case BUFFER_BUSY:
- stv680->dropped++;
- break;
-
- case BUFFER_UNUSED:
- memcpy (stv680->scratch[stv680->scratch_next].data,
- (unsigned char *) urb->transfer_buffer, length);
- stv680->scratch[stv680->scratch_next].state = BUFFER_READY;
- stv680->scratch[stv680->scratch_next].length = length;
- if (waitqueue_active (&stv680->wq)) {
- wake_up_interruptible (&stv680->wq);
- }
- stv680->scratch_overflow = 0;
- stv680->scratch_next++;
- if (stv680->scratch_next >= STV680_NUMSCRATCH)
- stv680->scratch_next = 0;
- break;
- } /* switch */
- } else {
- stv680->nullpackets++;
- if (stv680->nullpackets > STV680_MAX_NULLPACKETS) {
- if (waitqueue_active (&stv680->wq)) {
- wake_up_interruptible (&stv680->wq);
- }
- }
- } /* if - else */
-
- /* Resubmit urb for new data */
- urb->status = 0;
- urb->dev = stv680->udev;
- if (usb_submit_urb (urb, GFP_ATOMIC))
- PDEBUG (0, "STV(e): urb burned down in video irq");
- return;
-} /* _video_irq */
-
-static int stv680_start_stream (struct usb_stv *stv680)
-{
- struct urb *urb;
- int err = 0, i;
-
- stv680->streaming = 1;
-
- /* Do some memory allocation */
- for (i = 0; i < STV680_NUMFRAMES; i++) {
- stv680->frame[i].data = stv680->fbuf + i * stv680->maxframesize;
- stv680->frame[i].curpix = 0;
- }
- /* packet size = 4096 */
- for (i = 0; i < STV680_NUMSBUF; i++) {
- stv680->sbuf[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL);
- if (stv680->sbuf[i].data == NULL) {
- PDEBUG (0, "STV(e): Could not kmalloc raw data buffer %i", i);
- goto nomem_err;
- }
- }
-
- stv680->scratch_next = 0;
- stv680->scratch_use = 0;
- stv680->scratch_overflow = 0;
- for (i = 0; i < STV680_NUMSCRATCH; i++) {
- stv680->scratch[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL);
- if (stv680->scratch[i].data == NULL) {
- PDEBUG (0, "STV(e): Could not kmalloc raw scratch buffer %i", i);
- goto nomem_err;
- }
- stv680->scratch[i].state = BUFFER_UNUSED;
- }
-
- for (i = 0; i < STV680_NUMSBUF; i++) {
- urb = usb_alloc_urb (0, GFP_KERNEL);
- if (!urb)
- goto nomem_err;
-
- /* sbuf is urb->transfer_buffer, later gets memcpyed to scratch */
- usb_fill_bulk_urb (urb, stv680->udev,
- usb_rcvbulkpipe (stv680->udev, stv680->bulk_in_endpointAddr),
- stv680->sbuf[i].data, stv680->rawbufsize,
- stv680_video_irq, stv680);
- stv680->urb[i] = urb;
- err = usb_submit_urb (stv680->urb[i], GFP_KERNEL);
- if (err) {
- PDEBUG (0, "STV(e): urb burned down with err "
- "%d in start stream %d", err, i);
- goto nomem_err;
- }
- } /* i STV680_NUMSBUF */
-
- stv680->framecount = 0;
- return 0;
-
- nomem_err:
- for (i = 0; i < STV680_NUMSBUF; i++) {
- usb_kill_urb(stv680->urb[i]);
- usb_free_urb(stv680->urb[i]);
- stv680->urb[i] = NULL;
- kfree(stv680->sbuf[i].data);
- stv680->sbuf[i].data = NULL;
- }
- /* used in irq, free only as all URBs are dead */
- for (i = 0; i < STV680_NUMSCRATCH; i++) {
- kfree(stv680->scratch[i].data);
- stv680->scratch[i].data = NULL;
- }
- return -ENOMEM;
-
-}
-
-static int stv680_stop_stream (struct usb_stv *stv680)
-{
- int i;
-
- if (!stv680->streaming || !stv680->udev)
- return 1;
-
- stv680->streaming = 0;
-
- for (i = 0; i < STV680_NUMSBUF; i++)
- if (stv680->urb[i]) {
- usb_kill_urb (stv680->urb[i]);
- usb_free_urb (stv680->urb[i]);
- stv680->urb[i] = NULL;
- kfree(stv680->sbuf[i].data);
- }
- for (i = 0; i < STV680_NUMSCRATCH; i++) {
- kfree(stv680->scratch[i].data);
- stv680->scratch[i].data = NULL;
- }
-
- return 0;
-}
-
-static int stv680_set_size (struct usb_stv *stv680, int width, int height)
-{
- int wasstreaming = stv680->streaming;
-
- /* Check to see if we need to change */
- if ((stv680->vwidth == width) && (stv680->vheight == height))
- return 0;
-
- PDEBUG (1, "STV(i): size request for %i x %i", width, height);
- /* Check for a valid mode */
- if ((!width || !height) || ((width & 1) || (height & 1))) {
- PDEBUG (1, "STV(e): set_size error: request: v.width = %i, v.height = %i actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight);
- return 1;
- }
-
- if ((width < (stv680->maxwidth / 2)) || (height < (stv680->maxheight / 2))) {
- width = stv680->maxwidth / 2;
- height = stv680->maxheight / 2;
- } else if ((width >= 158) && (width <= 166) && (stv680->QVGA == 1)) {
- width = 160;
- height = 120;
- } else if ((width >= 172) && (width <= 180) && (stv680->CIF == 1)) {
- width = 176;
- height = 144;
- } else if ((width >= 318) && (width <= 350) && (stv680->QVGA == 1)) {
- width = 320;
- height = 240;
- } else if ((width >= 350) && (width <= 358) && (stv680->CIF == 1)) {
- width = 352;
- height = 288;
- } else {
- PDEBUG (1, "STV(e): request for non-supported size: request: v.width = %i, v.height = %i actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight);
- return 1;
- }
-
- /* Stop a current stream and start it again at the new size */
- if (wasstreaming)
- stv680_stop_stream (stv680);
- stv680->vwidth = width;
- stv680->vheight = height;
- PDEBUG (1, "STV(i): size set to %i x %i", stv680->vwidth, stv680->vheight);
- if (wasstreaming)
- stv680_start_stream (stv680);
-
- return 0;
-}
-
-/**********************************************************************
- * Video Decoding
- **********************************************************************/
-
-/******* routines from the pencam program; hey, they work! ********/
-
-/*
- * STV0680 Vision Camera Chipset Driver
- * Copyright (C) 2000 Adam Harrison <adam@antispin.org>
-*/
-
-#define RED 0
-#define GREEN 1
-#define BLUE 2
-#define AD(x, y, w) (((y)*(w)+(x))*3)
-
-static void bayer_unshuffle (struct usb_stv *stv680, struct stv680_scratch *buffer)
-{
- int x, y, i;
- int w = stv680->cwidth;
- int vw = stv680->cwidth, vh = stv680->cheight;
- unsigned int p = 0;
- int colour = 0, bayer = 0;
- unsigned char *raw = buffer->data;
- struct stv680_frame *frame = &stv680->frame[stv680->curframe];
- unsigned char *output = frame->data;
- unsigned char *temp = frame->data;
- int offset = buffer->offset;
-
- if (frame->curpix == 0) {
- if (frame->grabstate == FRAME_READY) {
- frame->grabstate = FRAME_GRABBING;
- }
- }
- if (offset != frame->curpix) { /* Regard frame as lost :( */
- frame->curpix = 0;
- stv680->error++;
- return;
- }
-
- if ((stv680->vwidth == 320) || (stv680->vwidth == 160)) {
- vw = 320;
- vh = 240;
- }
- if ((stv680->vwidth == 352) || (stv680->vwidth == 176)) {
- vw = 352;
- vh = 288;
- }
-
- memset (output, 0, 3 * vw * vh); /* clear output matrix. */
-
- for (y = 0; y < vh; y++) {
- for (x = 0; x < vw; x++) {
- if (x & 1)
- p = *(raw + y * w + (x >> 1));
- else
- p = *(raw + y * w + (x >> 1) + (w >> 1));
-
- if (y & 1)
- bayer = 2;
- else
- bayer = 0;
- if (x & 1)
- bayer++;
-
- switch (bayer) {
- case 0:
- case 3:
- colour = 1;
- break;
- case 1:
- colour = 0;
- break;
- case 2:
- colour = 2;
- break;
- }
- i = (y * vw + x) * 3;
- *(output + i + colour) = (unsigned char) p;
- } /* for x */
-
- } /* for y */
-
- /****** gamma correction plus hardcoded white balance */
- /* Thanks to Alexander Schwartx <alexander.schwartx@gmx.net> for this code.
- Correction values red[], green[], blue[], are generated by
- (pow(i/256.0, GAMMA)*255.0)*white balanceRGB where GAMMA=0.55, 1<i<255.
- White balance (RGB)= 1.0, 1.17, 1.48. Values are calculated as double float and
- converted to unsigned char. Values are in stv680.h */
-
- for (y = 0; y < vh; y++) {
- for (x = 0; x < vw; x++) {
- i = (y * vw + x) * 3;
- *(output + i) = red[*(output + i)];
- *(output + i + 1) = green[*(output + i + 1)];
- *(output + i + 2) = blue[*(output + i + 2)];
- }
- }
-
- /****** bayer demosaic ******/
- for (y = 1; y < (vh - 1); y++) {
- for (x = 1; x < (vw - 1); x++) { /* work out pixel type */
- if (y & 1)
- bayer = 0;
- else
- bayer = 2;
- if (!(x & 1))
- bayer++;
-
- switch (bayer) {
- case 0: /* green. blue lr, red tb */
- *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y, vw) + BLUE) + (int) *(output + AD (x + 1, y, vw) + BLUE)) >> 1;
- *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x, y - 1, vw) + RED) + (int) *(output + AD (x, y + 1, vw) + RED)) >> 1;
- break;
-
- case 1: /* blue. green lrtb, red diagonals */
- *(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2;
- *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y - 1, vw) + RED) + (int) *(output + AD (x - 1, y + 1, vw) + RED) + (int) *(output + AD (x + 1, y - 1, vw) + RED) + (int) *(output + AD (x + 1, y + 1, vw) + RED)) >> 2;
- break;
-
- case 2: /* red. green lrtb, blue diagonals */
- *(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2;
- *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y - 1, vw) + BLUE) + (int) *(output + AD (x + 1, y - 1, vw) + BLUE) + (int) *(output + AD (x - 1, y + 1, vw) + BLUE) + (int) *(output + AD (x + 1, y + 1, vw) + BLUE)) >> 2;
- break;
-
- case 3: /* green. red lr, blue tb */
- *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y, vw) + RED) + (int) *(output + AD (x + 1, y, vw) + RED)) >> 1;
- *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x, y - 1, vw) + BLUE) + (int) *(output + AD (x, y + 1, vw) + BLUE)) >> 1;
- break;
- } /* switch */
- } /* for x */
- } /* for y - end demosaic */
-
- /* fix top and bottom row, left and right side */
- i = vw * 3;
- memcpy (output, (output + i), i);
- memcpy ((output + (vh * i)), (output + ((vh - 1) * i)), i);
- for (y = 0; y < vh; y++) {
- i = y * vw * 3;
- memcpy ((output + i), (output + i + 3), 3);
- memcpy ((output + i + (vw * 3)), (output + i + (vw - 1) * 3), 3);
- }
-
- /* process all raw data, then trim to size if necessary */
- if ((stv680->vwidth == 160) || (stv680->vwidth == 176)) {
- i = 0;
- for (y = 0; y < vh; y++) {
- if (!(y & 1)) {
- for (x = 0; x < vw; x++) {
- p = (y * vw + x) * 3;
- if (!(x & 1)) {
- *(output + i) = *(output + p);
- *(output + i + 1) = *(output + p + 1);
- *(output + i + 2) = *(output + p + 2);
- i += 3;
- }
- } /* for x */
- }
- } /* for y */
- }
- /* reset to proper width */
- if ((stv680->vwidth == 160)) {
- vw = 160;
- vh = 120;
- }
- if ((stv680->vwidth == 176)) {
- vw = 176;
- vh = 144;
- }
-
- /* output is RGB; some programs want BGR */
- /* swapRGB_on=0 -> program decides; swapRGB_on=1, always swap */
- /* swapRGB_on=-1, never swap */
- if (((swapRGB == 1) && (swapRGB_on != -1)) || (swapRGB_on == 1)) {
- for (y = 0; y < vh; y++) {
- for (x = 0; x < vw; x++) {
- i = (y * vw + x) * 3;
- *(temp) = *(output + i);
- *(output + i) = *(output + i + 2);
- *(output + i + 2) = *(temp);
- }
- }
- }
- /* brightness */
- if (stv680->chgbright == 1) {
- if (stv680->brightness >= 32767) {
- p = (stv680->brightness - 32767) / 256;
- for (x = 0; x < (vw * vh * 3); x++) {
- if ((*(output + x) + (unsigned char) p) > 255)
- *(output + x) = 255;
- else
- *(output + x) += (unsigned char) p;
- } /* for */
- } else {
- p = (32767 - stv680->brightness) / 256;
- for (x = 0; x < (vw * vh * 3); x++) {
- if ((unsigned char) p > *(output + x))
- *(output + x) = 0;
- else
- *(output + x) -= (unsigned char) p;
- } /* for */
- } /* else */
- }
- /* if */
- frame->curpix = 0;
- frame->curlinepix = 0;
- frame->grabstate = FRAME_DONE;
- stv680->framecount++;
- stv680->readcount++;
- if (stv680->frame[(stv680->curframe + 1) & (STV680_NUMFRAMES - 1)].grabstate == FRAME_READY) {
- stv680->curframe = (stv680->curframe + 1) & (STV680_NUMFRAMES - 1);
- }
-
-} /* bayer_unshuffle */
-
-/******* end routines from the pencam program *********/
-
-static int stv680_newframe (struct usb_stv *stv680, int framenr)
-{
- int errors = 0;
-
- while (stv680->streaming && (stv680->frame[framenr].grabstate == FRAME_READY || stv680->frame[framenr].grabstate == FRAME_GRABBING)) {
- if (!stv680->frame[framenr].curpix) {
- errors++;
- }
- wait_event_interruptible (stv680->wq, (stv680->scratch[stv680->scratch_use].state == BUFFER_READY));
-
- if (stv680->nullpackets > STV680_MAX_NULLPACKETS) {
- stv680->nullpackets = 0;
- PDEBUG (2, "STV(i): too many null length packets, restarting capture");
- stv680_stop_stream (stv680);
- stv680_start_stream (stv680);
- } else {
- if (stv680->scratch[stv680->scratch_use].state != BUFFER_READY) {
- stv680->frame[framenr].grabstate = FRAME_ERROR;
- PDEBUG (2, "STV(e): FRAME_ERROR in _newframe");
- return -EIO;
- }
- stv680->scratch[stv680->scratch_use].state = BUFFER_BUSY;
-
- bayer_unshuffle (stv680, &stv680->scratch[stv680->scratch_use]);
-
- stv680->scratch[stv680->scratch_use].state = BUFFER_UNUSED;
- stv680->scratch_use++;
- if (stv680->scratch_use >= STV680_NUMSCRATCH)
- stv680->scratch_use = 0;
- if (errors > STV680_MAX_ERRORS) {
- errors = 0;
- PDEBUG (2, "STV(i): too many errors, restarting capture");
- stv680_stop_stream (stv680);
- stv680_start_stream (stv680);
- }
- } /* else */
- } /* while */
- return 0;
-}
-
-/*********************************************************************
- * Video4Linux
- *********************************************************************/
-
-static int stv_open(struct file *file)
-{
- struct video_device *dev = video_devdata(file);
- struct usb_stv *stv680 = video_get_drvdata(dev);
- int err = 0;
-
- /* we are called with the BKL held */
- lock_kernel();
- stv680->user = 1;
- err = stv_init (stv680); /* main initialization routine for camera */
-
- if (err >= 0) {
- stv680->fbuf = rvmalloc (stv680->maxframesize * STV680_NUMFRAMES);
- if (!stv680->fbuf) {
- PDEBUG (0, "STV(e): Could not rvmalloc frame bufer");
- err = -ENOMEM;
- }
- file->private_data = dev;
- }
- if (err)
- stv680->user = 0;
- unlock_kernel();
-
- return err;
-}
-
-static int stv_close(struct file *file)
-{
- struct video_device *dev = file->private_data;
- struct usb_stv *stv680 = video_get_drvdata(dev);
- int i;
-
- for (i = 0; i < STV680_NUMFRAMES; i++)
- stv680->frame[i].grabstate = FRAME_UNUSED;
- if (stv680->streaming)
- stv680_stop_stream (stv680);
-
- if ((i = stv_stop_video (stv680)) < 0)
- PDEBUG (1, "STV(e): stop_video failed in stv_close");
-
- rvfree (stv680->fbuf, stv680->maxframesize * STV680_NUMFRAMES);
- stv680->user = 0;
-
- if (stv680->removed) {
- kfree(stv680);
- stv680 = NULL;
- PDEBUG (0, "STV(i): device unregistered");
- }
- file->private_data = NULL;
- return 0;
-}
-
-static long stv680_do_ioctl(struct file *file, unsigned int cmd, void *arg)
-{
- struct video_device *vdev = file->private_data;
- struct usb_stv *stv680 = video_get_drvdata(vdev);
-
- if (!stv680->udev)
- return -EIO;
-
- switch (cmd) {
- case VIDIOCGCAP:{
- struct video_capability *b = arg;
-
- strcpy (b->name, stv680->camera_name);
- b->type = VID_TYPE_CAPTURE;
- b->channels = 1;
- b->audios = 0;
- b->maxwidth = stv680->maxwidth;
- b->maxheight = stv680->maxheight;
- b->minwidth = stv680->maxwidth / 2;
- b->minheight = stv680->maxheight / 2;
- return 0;
- }
- case VIDIOCGCHAN:{
- struct video_channel *v = arg;
-
- if (v->channel != 0)
- return -EINVAL;
- v->flags = 0;
- v->tuners = 0;
- v->type = VIDEO_TYPE_CAMERA;
- strcpy (v->name, "STV Camera");
- return 0;
- }
- case VIDIOCSCHAN:{
- struct video_channel *v = arg;
- if (v->channel != 0)
- return -EINVAL;
- return 0;
- }
- case VIDIOCGPICT:{
- struct video_picture *p = arg;
-
- stv680_get_pict (stv680, p);
- return 0;
- }
- case VIDIOCSPICT:{
- struct video_picture *p = arg;
-
- if (stv680_set_pict (stv680, p))
- return -EINVAL;
- return 0;
- }
- case VIDIOCSWIN:{
- struct video_window *vw = arg;
-
- if (vw->flags)
- return -EINVAL;
- if (vw->clipcount)
- return -EINVAL;
- if (vw->width != stv680->vwidth) {
- if (stv680_set_size (stv680, vw->width, vw->height)) {
- PDEBUG (2, "STV(e): failed (from user) set size in VIDIOCSWIN");
- return -EINVAL;
- }
- }
- return 0;
- }
- case VIDIOCGWIN:{
- struct video_window *vw = arg;
-
- vw->x = 0; /* FIXME */
- vw->y = 0;
- vw->chromakey = 0;
- vw->flags = 0;
- vw->clipcount = 0;
- vw->width = stv680->vwidth;
- vw->height = stv680->vheight;
- return 0;
- }
- case VIDIOCGMBUF:{
- struct video_mbuf *vm = arg;
- int i;
-
- memset (vm, 0, sizeof (*vm));
- vm->size = STV680_NUMFRAMES * stv680->maxframesize;
- vm->frames = STV680_NUMFRAMES;
- for (i = 0; i < STV680_NUMFRAMES; i++)
- vm->offsets[i] = stv680->maxframesize * i;
- return 0;
- }
- case VIDIOCMCAPTURE:{
- struct video_mmap *vm = arg;
-
- if (vm->format != STV_VIDEO_PALETTE) {
- PDEBUG (2, "STV(i): VIDIOCMCAPTURE vm.format (%i) != VIDEO_PALETTE (%i)",
- vm->format, STV_VIDEO_PALETTE);
- if ((vm->format == 3) && (swapRGB_on == 0)) {
- PDEBUG (2, "STV(i): VIDIOCMCAPTURE swapRGB is (auto) ON");
- /* this may fix those apps (e.g., xawtv) that want BGR */
- swapRGB = 1;
- }
- return -EINVAL;
- }
- if (vm->frame >= STV680_NUMFRAMES) {
- PDEBUG (2, "STV(e): VIDIOCMCAPTURE vm.frame > NUMFRAMES");
- return -EINVAL;
- }
- if ((stv680->frame[vm->frame].grabstate == FRAME_ERROR)
- || (stv680->frame[vm->frame].grabstate == FRAME_GRABBING)) {
- PDEBUG (2, "STV(e): VIDIOCMCAPTURE grabstate (%i) error",
- stv680->frame[vm->frame].grabstate);
- return -EBUSY;
- }
- /* Is this according to the v4l spec??? */
- if (stv680->vwidth != vm->width) {
- if (stv680_set_size (stv680, vm->width, vm->height)) {
- PDEBUG (2, "STV(e): VIDIOCMCAPTURE set_size failed");
- return -EINVAL;
- }
- }
- stv680->frame[vm->frame].grabstate = FRAME_READY;
-
- if (!stv680->streaming)
- stv680_start_stream (stv680);
-
- return 0;
- }
- case VIDIOCSYNC:{
- int *frame = arg;
- int ret = 0;
-
- if (*frame < 0 || *frame >= STV680_NUMFRAMES) {
- PDEBUG (2, "STV(e): Bad frame # in VIDIOCSYNC");
- return -EINVAL;
- }
- ret = stv680_newframe (stv680, *frame);
- stv680->frame[*frame].grabstate = FRAME_UNUSED;
- return ret;
- }
- case VIDIOCGFBUF:{
- struct video_buffer *vb = arg;
-
- memset (vb, 0, sizeof (*vb));
- return 0;
- }
- case VIDIOCKEY:
- return 0;
- case VIDIOCCAPTURE:
- {
- PDEBUG (2, "STV(e): VIDIOCCAPTURE failed");
- return -EINVAL;
- }
- case VIDIOCSFBUF:
- case VIDIOCGTUNER:
- case VIDIOCSTUNER:
- case VIDIOCGFREQ:
- case VIDIOCSFREQ:
- case VIDIOCGAUDIO:
- case VIDIOCSAUDIO:
- return -EINVAL;
- default:
- return -ENOIOCTLCMD;
- } /* end switch */
-
- return 0;
-}
-
-static long stv680_ioctl(struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- return video_usercopy(file, cmd, arg, stv680_do_ioctl);
-}
-
-static int stv680_mmap (struct file *file, struct vm_area_struct *vma)
-{
- struct video_device *dev = file->private_data;
- struct usb_stv *stv680 = video_get_drvdata(dev);
- unsigned long start = vma->vm_start;
- unsigned long size = vma->vm_end-vma->vm_start;
- unsigned long page, pos;
-
- mutex_lock(&stv680->lock);
-
- if (stv680->udev == NULL) {
- mutex_unlock(&stv680->lock);
- return -EIO;
- }
- if (size > (((STV680_NUMFRAMES * stv680->maxframesize) + PAGE_SIZE - 1)
- & ~(PAGE_SIZE - 1))) {
- mutex_unlock(&stv680->lock);
- return -EINVAL;
- }
- pos = (unsigned long) stv680->fbuf;
- while (size > 0) {
- page = vmalloc_to_pfn((void *)pos);
- if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
- mutex_unlock(&stv680->lock);
- return -EAGAIN;
- }
- start += PAGE_SIZE;
- pos += PAGE_SIZE;
- if (size > PAGE_SIZE)
- size -= PAGE_SIZE;
- else
- size = 0;
- }
- mutex_unlock(&stv680->lock);
-
- return 0;
-}
-
-static ssize_t stv680_read (struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct video_device *dev = file->private_data;
- unsigned long int realcount = count;
- int ret = 0;
- struct usb_stv *stv680 = video_get_drvdata(dev);
- unsigned long int i;
-
- if (STV680_NUMFRAMES != 2) {
- PDEBUG (0, "STV(e): STV680_NUMFRAMES needs to be 2!");
- return -1;
- }
- if (stv680->udev == NULL)
- return -EIO;
- if (realcount > (stv680->vwidth * stv680->vheight * 3))
- realcount = stv680->vwidth * stv680->vheight * 3;
-
- /* Shouldn't happen: */
- if (stv680->frame[0].grabstate == FRAME_GRABBING) {
- PDEBUG (2, "STV(e): FRAME_GRABBING in stv680_read");
- return -EBUSY;
- }
- stv680->frame[0].grabstate = FRAME_READY;
- stv680->frame[1].grabstate = FRAME_UNUSED;
- stv680->curframe = 0;
-
- if (!stv680->streaming)
- stv680_start_stream (stv680);
-
- if (!stv680->streaming) {
- ret = stv680_newframe (stv680, 0); /* ret should = 0 */
- }
-
- ret = stv680_newframe (stv680, 0);
-
- if (!ret) {
- if ((i = copy_to_user (buf, stv680->frame[0].data, realcount)) != 0) {
- PDEBUG (2, "STV(e): copy_to_user frame 0 failed, ret count = %li", i);
- return -EFAULT;
- }
- } else {
- realcount = ret;
- }
- stv680->frame[0].grabstate = FRAME_UNUSED;
- return realcount;
-} /* stv680_read */
-
-static const struct v4l2_file_operations stv680_fops = {
- .owner = THIS_MODULE,
- .open = stv_open,
- .release = stv_close,
- .read = stv680_read,
- .mmap = stv680_mmap,
- .ioctl = stv680_ioctl,
-};
-static struct video_device stv680_template = {
- .name = "STV0680 USB camera",
- .fops = &stv680_fops,
- .release = video_device_release,
-};
-
-static int stv680_probe (struct usb_interface *intf, const struct usb_device_id *id)
-{
- struct usb_device *dev = interface_to_usbdev(intf);
- struct usb_host_interface *interface;
- struct usb_stv *stv680 = NULL;
- char *camera_name = NULL;
- int retval = 0;
-
- /* We don't handle multi-config cameras */
- if (dev->descriptor.bNumConfigurations != 1) {
- PDEBUG (0, "STV(e): Number of Configurations != 1");
- return -ENODEV;
- }
-
- interface = &intf->altsetting[0];
- /* Is it a STV680? */
- if ((le16_to_cpu(dev->descriptor.idVendor) == USB_PENCAM_VENDOR_ID) &&
- (le16_to_cpu(dev->descriptor.idProduct) == USB_PENCAM_PRODUCT_ID)) {
- camera_name = "STV0680";
- PDEBUG (0, "STV(i): STV0680 camera found.");
- } else if ((le16_to_cpu(dev->descriptor.idVendor) == USB_CREATIVEGOMINI_VENDOR_ID) &&
- (le16_to_cpu(dev->descriptor.idProduct) == USB_CREATIVEGOMINI_PRODUCT_ID)) {
- camera_name = "Creative WebCam Go Mini";
- PDEBUG (0, "STV(i): Creative WebCam Go Mini found.");
- } else {
- PDEBUG (0, "STV(e): Vendor/Product ID do not match STV0680 or Creative WebCam Go Mini values.");
- PDEBUG (0, "STV(e): Check that the STV0680 or Creative WebCam Go Mini camera is connected to the computer.");
- retval = -ENODEV;
- goto error;
- }
- /* We found one */
- if ((stv680 = kzalloc (sizeof (*stv680), GFP_KERNEL)) == NULL) {
- PDEBUG (0, "STV(e): couldn't kmalloc stv680 struct.");
- retval = -ENOMEM;
- goto error;
- }
-
- stv680->udev = dev;
- stv680->camera_name = camera_name;
-
- stv680->vdev = video_device_alloc();
- if (!stv680->vdev) {
- retval = -ENOMEM;
- goto error;
- }
- memcpy(stv680->vdev, &stv680_template, sizeof(stv680_template));
- stv680->vdev->parent = &intf->dev;
- video_set_drvdata(stv680->vdev, stv680);
-
- memcpy (stv680->vdev->name, stv680->camera_name, strlen (stv680->camera_name));
- init_waitqueue_head (&stv680->wq);
- mutex_init (&stv680->lock);
- wmb ();
-
- if (video_register_device(stv680->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
- PDEBUG (0, "STV(e): video_register_device failed");
- retval = -EIO;
- goto error_vdev;
- }
- PDEBUG(0, "STV(i): registered new video device: %s",
- video_device_node_name(stv680->vdev));
-
- usb_set_intfdata (intf, stv680);
- retval = stv680_create_sysfs_files(stv680->vdev);
- if (retval)
- goto error_unreg;
- return 0;
-
-error_unreg:
- video_unregister_device(stv680->vdev);
-error_vdev:
- video_device_release(stv680->vdev);
-error:
- kfree(stv680);
- return retval;
-}
-
-static inline void usb_stv680_remove_disconnected (struct usb_stv *stv680)
-{
- int i;
-
- stv680->udev = NULL;
- stv680->frame[0].grabstate = FRAME_ERROR;
- stv680->frame[1].grabstate = FRAME_ERROR;
- stv680->streaming = 0;
-
- wake_up_interruptible (&stv680->wq);
-
- for (i = 0; i < STV680_NUMSBUF; i++)
- if (stv680->urb[i]) {
- usb_kill_urb (stv680->urb[i]);
- usb_free_urb (stv680->urb[i]);
- stv680->urb[i] = NULL;
- kfree(stv680->sbuf[i].data);
- }
- for (i = 0; i < STV680_NUMSCRATCH; i++)
- kfree(stv680->scratch[i].data);
- PDEBUG (0, "STV(i): %s disconnected", stv680->camera_name);
-
- /* Free the memory */
- kfree(stv680);
-}
-
-static void stv680_disconnect (struct usb_interface *intf)
-{
- struct usb_stv *stv680 = usb_get_intfdata (intf);
-
- usb_set_intfdata (intf, NULL);
-
- if (stv680) {
- /* We don't want people trying to open up the device */
- if (stv680->vdev) {
- stv680_remove_sysfs_files(stv680->vdev);
- video_unregister_device(stv680->vdev);
- stv680->vdev = NULL;
- }
- if (!stv680->user) {
- usb_stv680_remove_disconnected (stv680);
- } else {
- stv680->removed = 1;
- }
- }
-}
-
-static struct usb_driver stv680_driver = {
- .name = "stv680",
- .probe = stv680_probe,
- .disconnect = stv680_disconnect,
- .id_table = device_table
-};
-
-/********************************************************************
- * Module routines
- ********************************************************************/
-
-static int __init usb_stv680_init (void)
-{
- if (usb_register (&stv680_driver) < 0) {
- PDEBUG (0, "STV(e): Could not setup STV0680 driver");
- return -1;
- }
- PDEBUG (0, "STV(i): usb camera driver version %s registering", DRIVER_VERSION);
-
- printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
- DRIVER_DESC "\n");
- return 0;
-}
-
-static void __exit usb_stv680_exit (void)
-{
- usb_deregister (&stv680_driver);
- PDEBUG (0, "STV(i): driver deregistered");
-}
-
-module_init (usb_stv680_init);
-module_exit (usb_stv680_exit);
diff --git a/drivers/media/video/stv680.h b/drivers/media/video/stv680.h
deleted file mode 100644
index a08f1b0..0000000
--- a/drivers/media/video/stv680.h
+++ /dev/null
@@ -1,227 +0,0 @@
-/****************************************************************************
- *
- * Filename: stv680.h
- *
- * Description:
- * This is a USB driver for STV0680 based usb video cameras.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- ****************************************************************************/
-
-/* size of usb transfers */
-#define STV680_PACKETSIZE 4096
-
-/* number of queued bulk transfers to use, may have problems if > 1 */
-#define STV680_NUMSBUF 1
-
-/* number of frames supported by the v4l part */
-#define STV680_NUMFRAMES 2
-
-/* scratch buffers for passing data to the decoders: 2 or 4 are good */
-#define STV680_NUMSCRATCH 2
-
-/* number of nul sized packets to receive before kicking the camera */
-#define STV680_MAX_NULLPACKETS 200
-
-/* number of decoding errors before kicking the camera */
-#define STV680_MAX_ERRORS 100
-
-#define USB_PENCAM_VENDOR_ID 0x0553
-#define USB_PENCAM_PRODUCT_ID 0x0202
-
-#define USB_CREATIVEGOMINI_VENDOR_ID 0x041e
-#define USB_CREATIVEGOMINI_PRODUCT_ID 0x4007
-
-#define PENCAM_TIMEOUT 1000
-/* fmt 4 */
-#define STV_VIDEO_PALETTE VIDEO_PALETTE_RGB24
-
-static struct usb_device_id device_table[] = {
- {USB_DEVICE (USB_PENCAM_VENDOR_ID, USB_PENCAM_PRODUCT_ID)},
- {USB_DEVICE (USB_CREATIVEGOMINI_VENDOR_ID, USB_CREATIVEGOMINI_PRODUCT_ID)},
- {}
-};
-MODULE_DEVICE_TABLE (usb, device_table);
-
-struct stv680_sbuf {
- unsigned char *data;
-};
-
-enum {
- FRAME_UNUSED, /* Unused (no MCAPTURE) */
- FRAME_READY, /* Ready to start grabbing */
- FRAME_GRABBING, /* In the process of being grabbed into */
- FRAME_DONE, /* Finished grabbing, but not been synced yet */
- FRAME_ERROR, /* Something bad happened while processing */
-};
-
-enum {
- BUFFER_UNUSED,
- BUFFER_READY,
- BUFFER_BUSY,
- BUFFER_DONE,
-};
-
-/* raw camera data <- sbuf (urb transfer buf) */
-struct stv680_scratch {
- unsigned char *data;
- volatile int state;
- int offset;
- int length;
-};
-
-/* processed data for display ends up here, after bayer */
-struct stv680_frame {
- unsigned char *data; /* Frame buffer */
- volatile int grabstate; /* State of grabbing */
- unsigned char *curline;
- int curlinepix;
- int curpix;
-};
-
-/* this is almost the video structure uvd_t, with extra parameters for stv */
-struct usb_stv {
- struct video_device *vdev;
-
- struct usb_device *udev;
-
- unsigned char bulk_in_endpointAddr; /* __u8 the address of the bulk in endpoint */
- char *camera_name;
-
- unsigned int VideoMode; /* 0x0100 = VGA, 0x0000 = CIF, 0x0300 = QVGA */
- int SupportedModes;
- int CIF;
- int VGA;
- int QVGA;
- int cwidth; /* camera width */
- int cheight; /* camera height */
- int maxwidth; /* max video width */
- int maxheight; /* max video height */
- int vwidth; /* current width for video window */
- int vheight; /* current height for video window */
- unsigned long int rawbufsize;
- unsigned long int maxframesize; /* rawbufsize * 3 for RGB */
-
- int origGain;
- int origMode; /* original camera mode */
-
- struct mutex lock; /* to lock the structure */
- int user; /* user count for exclusive use */
- int removed; /* device disconnected */
- int streaming; /* Are we streaming video? */
- char *fbuf; /* Videodev buffer area */
- struct urb *urb[STV680_NUMSBUF]; /* # of queued bulk transfers */
- int curframe; /* Current receiving frame */
- struct stv680_frame frame[STV680_NUMFRAMES]; /* # frames supported by v4l part */
- int readcount;
- int framecount;
- int error;
- int dropped;
- int scratch_next;
- int scratch_use;
- int scratch_overflow;
- struct stv680_scratch scratch[STV680_NUMSCRATCH]; /* for decoders */
- struct stv680_sbuf sbuf[STV680_NUMSBUF];
-
- unsigned int brightness;
- unsigned int chgbright;
- unsigned int whiteness;
- unsigned int colour;
- unsigned int contrast;
- unsigned int hue;
- unsigned int palette;
- unsigned int depth; /* rgb24 in bits */
-
- wait_queue_head_t wq; /* Processes waiting */
-
- int nullpackets;
-};
-
-
-static const unsigned char red[256] = {
- 0, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18,
- 18, 18, 18, 18, 18, 18, 18, 25, 30, 35, 38, 42,
- 44, 47, 50, 53, 54, 57, 59, 61, 63, 65, 67, 69,
- 71, 71, 73, 75, 77, 78, 80, 81, 82, 84, 85, 87,
- 88, 89, 90, 91, 93, 94, 95, 97, 98, 98, 99, 101,
- 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,
- 114, 115, 116, 116, 117, 118, 119, 120, 121, 122, 123, 124,
- 125, 125, 126, 127, 128, 129, 129, 130, 131, 132, 133, 134,
- 134, 135, 135, 136, 137, 138, 139, 140, 140, 141, 142, 143,
- 143, 143, 144, 145, 146, 147, 147, 148, 149, 150, 150, 151,
- 152, 152, 152, 153, 154, 154, 155, 156, 157, 157, 158, 159,
- 159, 160, 161, 161, 161, 162, 163, 163, 164, 165, 165, 166,
- 167, 167, 168, 168, 169, 170, 170, 170, 171, 171, 172, 173,
- 173, 174, 174, 175, 176, 176, 177, 178, 178, 179, 179, 179,
- 180, 180, 181, 181, 182, 183, 183, 184, 184, 185, 185, 186,
- 187, 187, 188, 188, 188, 188, 189, 190, 190, 191, 191, 192,
- 192, 193, 193, 194, 195, 195, 196, 196, 197, 197, 197, 197,
- 198, 198, 199, 199, 200, 201, 201, 202, 202, 203, 203, 204,
- 204, 205, 205, 206, 206, 206, 206, 207, 207, 208, 208, 209,
- 209, 210, 210, 211, 211, 212, 212, 213, 213, 214, 214, 215,
- 215, 215, 215, 216, 216, 217, 217, 218, 218, 218, 219, 219,
- 220, 220, 221, 221
-};
-
-static const unsigned char green[256] = {
- 0, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21,
- 21, 21, 21, 21, 21, 21, 21, 28, 34, 39, 43, 47,
- 50, 53, 56, 59, 61, 64, 66, 68, 71, 73, 75, 77,
- 79, 80, 82, 84, 86, 87, 89, 91, 92, 94, 95, 97,
- 98, 100, 101, 102, 104, 105, 106, 108, 109, 110, 111, 113,
- 114, 115, 116, 117, 118, 120, 121, 122, 123, 124, 125, 126,
- 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138,
- 139, 140, 141, 142, 143, 144, 144, 145, 146, 147, 148, 149,
- 150, 151, 151, 152, 153, 154, 155, 156, 156, 157, 158, 159,
- 160, 160, 161, 162, 163, 164, 164, 165, 166, 167, 167, 168,
- 169, 170, 170, 171, 172, 172, 173, 174, 175, 175, 176, 177,
- 177, 178, 179, 179, 180, 181, 182, 182, 183, 184, 184, 185,
- 186, 186, 187, 187, 188, 189, 189, 190, 191, 191, 192, 193,
- 193, 194, 194, 195, 196, 196, 197, 198, 198, 199, 199, 200,
- 201, 201, 202, 202, 203, 204, 204, 205, 205, 206, 206, 207,
- 208, 208, 209, 209, 210, 210, 211, 212, 212, 213, 213, 214,
- 214, 215, 215, 216, 217, 217, 218, 218, 219, 219, 220, 220,
- 221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227,
- 227, 228, 228, 229, 229, 230, 230, 231, 231, 232, 232, 233,
- 233, 234, 234, 235, 235, 236, 236, 237, 237, 238, 238, 239,
- 239, 240, 240, 241, 241, 242, 242, 243, 243, 243, 244, 244,
- 245, 245, 246, 246
-};
-
-static const unsigned char blue[256] = {
- 0, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,
- 23, 23, 23, 23, 23, 23, 23, 30, 37, 42, 47, 51,
- 55, 58, 61, 64, 67, 70, 72, 74, 78, 80, 82, 84,
- 86, 88, 90, 92, 94, 95, 97, 100, 101, 103, 104, 106,
- 107, 110, 111, 112, 114, 115, 116, 118, 119, 121, 122, 124,
- 125, 126, 127, 128, 129, 132, 133, 134, 135, 136, 137, 138,
- 139, 140, 141, 143, 144, 145, 146, 147, 148, 149, 150, 151,
- 152, 154, 155, 156, 157, 158, 158, 159, 160, 161, 162, 163,
- 165, 166, 166, 167, 168, 169, 170, 171, 171, 172, 173, 174,
- 176, 176, 177, 178, 179, 180, 180, 181, 182, 183, 183, 184,
- 185, 187, 187, 188, 189, 189, 190, 191, 192, 192, 193, 194,
- 194, 195, 196, 196, 198, 199, 200, 200, 201, 202, 202, 203,
- 204, 204, 205, 205, 206, 207, 207, 209, 210, 210, 211, 212,
- 212, 213, 213, 214, 215, 215, 216, 217, 217, 218, 218, 220,
- 221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227,
- 228, 228, 229, 229, 231, 231, 232, 233, 233, 234, 234, 235,
- 235, 236, 236, 237, 238, 238, 239, 239, 240, 240, 242, 242,
- 243, 243, 244, 244, 245, 246, 246, 247, 247, 248, 248, 249,
- 249, 250, 250, 251, 251, 253, 253, 254, 254, 255, 255, 255,
- 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
- 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
- 255, 255, 255, 255
-};
--
1.6.5.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 6/6] Remove obsolete zc0301 v4l driver
2010-05-28 17:02 [PATCH 0/6] Remove some obsolete drivers for 2.6.35 Amerigo Wang
` (4 preceding siblings ...)
2010-05-28 17:03 ` [PATCH 5/6] Remove obsolete stv680 v4l1 driver Amerigo Wang
@ 2010-05-28 17:03 ` Amerigo Wang
2010-05-28 17:30 ` Jean-Francois Moine
5 siblings, 1 reply; 9+ messages in thread
From: Amerigo Wang @ 2010-05-28 17:03 UTC (permalink / raw)
To: linux-media; +Cc: Hans de Goede, Amerigo Wang
From: Amerigo Wang <amwang@redhat.com>
Date: Fri, 28 May 2010 17:53:47 +0800
Subject: [PATCH 6/6] Remove obsolete zc0301 v4l driver
Duplicate functionality with the gspca_zc3xx driver, zc0301 only
supports 2 USB-ID's (because it only supports a limited set of
sensors) wich are also supported by the gspca_zc3xx driver
(which supports 53 USB-ID's in total).
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Amerigo Wang <amwang@redhat.com>
---
Documentation/feature-removal-schedule.txt | 11 -
drivers/media/video/Kconfig | 2 -
drivers/media/video/Makefile | 1 -
drivers/media/video/zc0301/Kconfig | 15 -
drivers/media/video/zc0301/Makefile | 3 -
drivers/media/video/zc0301/zc0301.h | 196 ---
drivers/media/video/zc0301/zc0301_core.c | 2098 -------------------------
drivers/media/video/zc0301/zc0301_pas202bcb.c | 362 -----
drivers/media/video/zc0301/zc0301_pb0330.c | 188 ---
drivers/media/video/zc0301/zc0301_sensor.h | 107 --
10 files changed, 0 insertions(+), 2983 deletions(-)
delete mode 100644 drivers/media/video/zc0301/Kconfig
delete mode 100644 drivers/media/video/zc0301/Makefile
delete mode 100644 drivers/media/video/zc0301/zc0301.h
delete mode 100644 drivers/media/video/zc0301/zc0301_core.c
delete mode 100644 drivers/media/video/zc0301/zc0301_pas202bcb.c
delete mode 100644 drivers/media/video/zc0301/zc0301_pb0330.c
delete mode 100644 drivers/media/video/zc0301/zc0301_sensor.h
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 5a29615..a1b33b1 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -459,17 +459,6 @@ Who: Corentin Chary <corentin.chary@gmail.com>
----------------------------
-What: zc0301 v4l driver
-When: 2.6.35
-Files: drivers/media/video/zc0301/*
-Why: Duplicate functionality with the gspca_zc3xx driver, zc0301 only
- supports 2 USB-ID's (because it only supports a limited set of
- sensors) wich are also supported by the gspca_zc3xx driver
- (which supports 53 USB-ID's in total)
-Who: Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
What: sysfs-class-rfkill state file
When: Feb 2014
Files: net/rfkill/core.c
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 4361fe6..01f3696 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -1013,8 +1013,6 @@ config USB_SE401
source "drivers/media/video/sn9c102/Kconfig"
-source "drivers/media/video/zc0301/Kconfig"
-
source "drivers/media/video/pwc/Kconfig"
config USB_ZR364XX
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 5c2a38e..2beb4e4 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -133,7 +133,6 @@ obj-$(CONFIG_USB_STKWEBCAM) += stkwebcam.o
obj-$(CONFIG_USB_SN9C102) += sn9c102/
obj-$(CONFIG_USB_ET61X251) += et61x251/
obj-$(CONFIG_USB_PWC) += pwc/
-obj-$(CONFIG_USB_ZC0301) += zc0301/
obj-$(CONFIG_USB_GSPCA) += gspca/
obj-$(CONFIG_VIDEO_HDPVR) += hdpvr/
diff --git a/drivers/media/video/zc0301/Kconfig b/drivers/media/video/zc0301/Kconfig
deleted file mode 100644
index a7e610e..0000000
--- a/drivers/media/video/zc0301/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-config USB_ZC0301
- tristate "USB ZC0301[P] webcam support (DEPRECATED)"
- depends on VIDEO_V4L2
- default n
- ---help---
- This driver is DEPRECATED please use the gspca zc3xx module
- instead.
-
- Say Y here if you want support for cameras based on the ZC0301 or
- ZC0301P Image Processors and Control Chips.
-
- See <file:Documentation/video4linux/zc0301.txt> for more info.
-
- To compile this driver as a module, choose M here: the
- module will be called zc0301.
diff --git a/drivers/media/video/zc0301/Makefile b/drivers/media/video/zc0301/Makefile
deleted file mode 100644
index d9e6d97..0000000
--- a/drivers/media/video/zc0301/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-zc0301-objs := zc0301_core.o zc0301_pb0330.o zc0301_pas202bcb.o
-
-obj-$(CONFIG_USB_ZC0301) += zc0301.o
diff --git a/drivers/media/video/zc0301/zc0301.h b/drivers/media/video/zc0301/zc0301.h
deleted file mode 100644
index b1b5cce..0000000
--- a/drivers/media/video/zc0301/zc0301.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/***************************************************************************
- * V4L2 driver for ZC0301[P] Image Processor and Control Chip *
- * *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the Free Software *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
- ***************************************************************************/
-
-#ifndef _ZC0301_H_
-#define _ZC0301_H_
-
-#include <linux/version.h>
-#include <linux/usb.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/time.h>
-#include <linux/wait.h>
-#include <linux/types.h>
-#include <linux/param.h>
-#include <linux/mutex.h>
-#include <linux/rwsem.h>
-#include <linux/stddef.h>
-#include <linux/string.h>
-#include <linux/kref.h>
-
-#include "zc0301_sensor.h"
-
-/*****************************************************************************/
-
-#define ZC0301_DEBUG
-#define ZC0301_DEBUG_LEVEL 2
-#define ZC0301_MAX_DEVICES 64
-#define ZC0301_FORCE_MUNMAP 0
-#define ZC0301_MAX_FRAMES 32
-#define ZC0301_COMPRESSION_QUALITY 0
-#define ZC0301_URBS 2
-#define ZC0301_ISO_PACKETS 7
-#define ZC0301_ALTERNATE_SETTING 7
-#define ZC0301_URB_TIMEOUT msecs_to_jiffies(2 * ZC0301_ISO_PACKETS)
-#define ZC0301_CTRL_TIMEOUT 100
-#define ZC0301_FRAME_TIMEOUT 2
-
-/*****************************************************************************/
-
-ZC0301_ID_TABLE
-ZC0301_SENSOR_TABLE
-
-enum zc0301_frame_state {
- F_UNUSED,
- F_QUEUED,
- F_GRABBING,
- F_DONE,
- F_ERROR,
-};
-
-struct zc0301_frame_t {
- void* bufmem;
- struct v4l2_buffer buf;
- enum zc0301_frame_state state;
- struct list_head frame;
- unsigned long vma_use_count;
-};
-
-enum zc0301_dev_state {
- DEV_INITIALIZED = 0x01,
- DEV_DISCONNECTED = 0x02,
- DEV_MISCONFIGURED = 0x04,
-};
-
-enum zc0301_io_method {
- IO_NONE,
- IO_READ,
- IO_MMAP,
-};
-
-enum zc0301_stream_state {
- STREAM_OFF,
- STREAM_INTERRUPT,
- STREAM_ON,
-};
-
-struct zc0301_module_param {
- u8 force_munmap;
- u16 frame_timeout;
-};
-
-static DECLARE_RWSEM(zc0301_dev_lock);
-
-struct zc0301_device {
- struct video_device* v4ldev;
-
- struct zc0301_sensor sensor;
-
- struct usb_device* usbdev;
- struct urb* urb[ZC0301_URBS];
- void* transfer_buffer[ZC0301_URBS];
- u8* control_buffer;
-
- struct zc0301_frame_t *frame_current, frame[ZC0301_MAX_FRAMES];
- struct list_head inqueue, outqueue;
- u32 frame_count, nbuffers, nreadbuffers;
-
- enum zc0301_io_method io;
- enum zc0301_stream_state stream;
-
- struct v4l2_jpegcompression compression;
-
- struct zc0301_module_param module_param;
-
- struct kref kref;
- enum zc0301_dev_state state;
- u8 users;
-
- struct completion probe;
- struct mutex open_mutex, fileop_mutex;
- spinlock_t queue_lock;
- wait_queue_head_t wait_open, wait_frame, wait_stream;
-};
-
-/*****************************************************************************/
-
-struct zc0301_device*
-zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id)
-{
- return usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id) ? cam : NULL;
-}
-
-void
-zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor)
-{
- memcpy(&cam->sensor, sensor, sizeof(struct zc0301_sensor));
-}
-
-/*****************************************************************************/
-
-#undef DBG
-#undef KDBG
-#ifdef ZC0301_DEBUG
-# define DBG(level, fmt, args...) \
-do { \
- if (debug >= (level)) { \
- if ((level) == 1) \
- dev_err(&cam->usbdev->dev, fmt "\n", ## args); \
- else if ((level) == 2) \
- dev_info(&cam->usbdev->dev, fmt "\n", ## args); \
- else if ((level) >= 3) \
- dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", \
- __FILE__, __func__, __LINE__ , ## args); \
- } \
-} while (0)
-# define KDBG(level, fmt, args...) \
-do { \
- if (debug >= (level)) { \
- if ((level) == 1 || (level) == 2) \
- pr_info("zc0301: " fmt "\n", ## args); \
- else if ((level) == 3) \
- pr_debug("sn9c102: [%s:%s:%d] " fmt "\n", __FILE__, \
- __func__, __LINE__ , ## args); \
- } \
-} while (0)
-# define V4LDBG(level, name, cmd) \
-do { \
- if (debug >= (level)) \
- v4l_print_ioctl(name, cmd); \
-} while (0)
-#else
-# define DBG(level, fmt, args...) do {;} while(0)
-# define KDBG(level, fmt, args...) do {;} while(0)
-# define V4LDBG(level, name, cmd) do {;} while(0)
-#endif
-
-#undef PDBG
-#define PDBG(fmt, args...) \
-dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", __FILE__, __func__, \
- __LINE__ , ## args)
-
-#undef PDBGG
-#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
-
-#endif /* _ZC0301_H_ */
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
deleted file mode 100644
index bb51cfb..0000000
--- a/drivers/media/video/zc0301/zc0301_core.c
+++ /dev/null
@@ -1,2098 +0,0 @@
-/***************************************************************************
- * Video4Linux2 driver for ZC0301[P] Image Processor and Control Chip *
- * *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> *
- * *
- * Informations about the chip internals needed to enable the I2C protocol *
- * have been taken from the documentation of the ZC030x Video4Linux1 *
- * driver written by Andrew Birkett <andy@nobugs.org> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the Free Software *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
- ***************************************************************************/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <linux/poll.h>
-#include <linux/stat.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/page-flags.h>
-#include <asm/byteorder.h>
-#include <asm/page.h>
-#include <asm/uaccess.h>
-
-#include "zc0301.h"
-
-/*****************************************************************************/
-
-#define ZC0301_MODULE_NAME "V4L2 driver for ZC0301[P] " \
- "Image Processor and Control Chip"
-#define ZC0301_MODULE_AUTHOR "(C) 2006-2007 Luca Risolia"
-#define ZC0301_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
-#define ZC0301_MODULE_LICENSE "GPL"
-#define ZC0301_MODULE_VERSION "1:1.10"
-#define ZC0301_MODULE_VERSION_CODE KERNEL_VERSION(1, 1, 10)
-
-/*****************************************************************************/
-
-MODULE_DEVICE_TABLE(usb, zc0301_id_table);
-
-MODULE_AUTHOR(ZC0301_MODULE_AUTHOR " " ZC0301_AUTHOR_EMAIL);
-MODULE_DESCRIPTION(ZC0301_MODULE_NAME);
-MODULE_VERSION(ZC0301_MODULE_VERSION);
-MODULE_LICENSE(ZC0301_MODULE_LICENSE);
-
-static short video_nr[] = {[0 ... ZC0301_MAX_DEVICES-1] = -1};
-module_param_array(video_nr, short, NULL, 0444);
-MODULE_PARM_DESC(video_nr,
- "\n<-1|n[,...]> Specify V4L2 minor mode number."
- "\n -1 = use next available (default)"
- "\n n = use minor number n (integer >= 0)"
- "\nYou can specify up to "
- __MODULE_STRING(ZC0301_MAX_DEVICES) " cameras this way."
- "\nFor example:"
- "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
- "\nthe second registered camera and use auto for the first"
- "\none and for every other camera."
- "\n");
-
-static short force_munmap[] = {[0 ... ZC0301_MAX_DEVICES-1] =
- ZC0301_FORCE_MUNMAP};
-module_param_array(force_munmap, bool, NULL, 0444);
-MODULE_PARM_DESC(force_munmap,
- "\n<0|1[,...]> Force the application to unmap previously"
- "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
- "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
- "\nthis feature. This parameter is specific for each"
- "\ndetected camera."
- "\n 0 = do not force memory unmapping"
- "\n 1 = force memory unmapping (save memory)"
- "\nDefault value is "__MODULE_STRING(ZC0301_FORCE_MUNMAP)"."
- "\n");
-
-static unsigned int frame_timeout[] = {[0 ... ZC0301_MAX_DEVICES-1] =
- ZC0301_FRAME_TIMEOUT};
-module_param_array(frame_timeout, uint, NULL, 0644);
-MODULE_PARM_DESC(frame_timeout,
- "\n<n[,...]> Timeout for a video frame in seconds."
- "\nThis parameter is specific for each detected camera."
- "\nDefault value is "__MODULE_STRING(ZC0301_FRAME_TIMEOUT)"."
- "\n");
-
-#ifdef ZC0301_DEBUG
-static unsigned short debug = ZC0301_DEBUG_LEVEL;
-module_param(debug, ushort, 0644);
-MODULE_PARM_DESC(debug,
- "\n<n> Debugging information level, from 0 to 3:"
- "\n0 = none (use carefully)"
- "\n1 = critical errors"
- "\n2 = significant informations"
- "\n3 = more verbose messages"
- "\nLevel 3 is useful for testing only, when only "
- "one device is used."
- "\nDefault value is "__MODULE_STRING(ZC0301_DEBUG_LEVEL)"."
- "\n");
-#endif
-
-/*****************************************************************************/
-
-static u32
-zc0301_request_buffers(struct zc0301_device* cam, u32 count,
- enum zc0301_io_method io)
-{
- struct v4l2_pix_format* p = &(cam->sensor.pix_format);
- struct v4l2_rect* r = &(cam->sensor.cropcap.bounds);
- const size_t imagesize = cam->module_param.force_munmap ||
- io == IO_READ ?
- (p->width * p->height * p->priv) / 8 :
- (r->width * r->height * p->priv) / 8;
- void* buff = NULL;
- u32 i;
-
- if (count > ZC0301_MAX_FRAMES)
- count = ZC0301_MAX_FRAMES;
-
- cam->nbuffers = count;
- while (cam->nbuffers > 0) {
- if ((buff = vmalloc_32_user(cam->nbuffers *
- PAGE_ALIGN(imagesize))))
- break;
- cam->nbuffers--;
- }
-
- for (i = 0; i < cam->nbuffers; i++) {
- cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize);
- cam->frame[i].buf.index = i;
- cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize);
- cam->frame[i].buf.length = imagesize;
- cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- cam->frame[i].buf.sequence = 0;
- cam->frame[i].buf.field = V4L2_FIELD_NONE;
- cam->frame[i].buf.memory = V4L2_MEMORY_MMAP;
- cam->frame[i].buf.flags = 0;
- }
-
- return cam->nbuffers;
-}
-
-
-static void zc0301_release_buffers(struct zc0301_device* cam)
-{
- if (cam->nbuffers) {
- vfree(cam->frame[0].bufmem);
- cam->nbuffers = 0;
- }
- cam->frame_current = NULL;
-}
-
-
-static void zc0301_empty_framequeues(struct zc0301_device* cam)
-{
- u32 i;
-
- INIT_LIST_HEAD(&cam->inqueue);
- INIT_LIST_HEAD(&cam->outqueue);
-
- for (i = 0; i < ZC0301_MAX_FRAMES; i++) {
- cam->frame[i].state = F_UNUSED;
- cam->frame[i].buf.bytesused = 0;
- }
-}
-
-
-static void zc0301_requeue_outqueue(struct zc0301_device* cam)
-{
- struct zc0301_frame_t *i;
-
- list_for_each_entry(i, &cam->outqueue, frame) {
- i->state = F_QUEUED;
- list_add(&i->frame, &cam->inqueue);
- }
-
- INIT_LIST_HEAD(&cam->outqueue);
-}
-
-
-static void zc0301_queue_unusedframes(struct zc0301_device* cam)
-{
- unsigned long lock_flags;
- u32 i;
-
- for (i = 0; i < cam->nbuffers; i++)
- if (cam->frame[i].state == F_UNUSED) {
- cam->frame[i].state = F_QUEUED;
- spin_lock_irqsave(&cam->queue_lock, lock_flags);
- list_add_tail(&cam->frame[i].frame, &cam->inqueue);
- spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
- }
-}
-
-/*****************************************************************************/
-
-int zc0301_write_reg(struct zc0301_device* cam, u16 index, u16 value)
-{
- struct usb_device* udev = cam->usbdev;
- int res;
-
- res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0xa0, 0x40,
- value, index, NULL, 0, ZC0301_CTRL_TIMEOUT);
- if (res < 0) {
- DBG(3, "Failed to write a register (index 0x%04X, "
- "value 0x%02X, error %d)",index, value, res);
- return -1;
- }
-
- return 0;
-}
-
-
-int zc0301_read_reg(struct zc0301_device* cam, u16 index)
-{
- struct usb_device* udev = cam->usbdev;
- u8* buff = cam->control_buffer;
- int res;
-
- res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0xa1, 0xc0,
- 0x0001, index, buff, 1, ZC0301_CTRL_TIMEOUT);
- if (res < 0)
- DBG(3, "Failed to read a register (index 0x%04X, error %d)",
- index, res);
-
- PDBGG("Read: index 0x%04X, value: 0x%04X", index, (int)(*buff));
-
- return (res >= 0) ? (int)(*buff) : -1;
-}
-
-
-int zc0301_i2c_read(struct zc0301_device* cam, u16 address, u8 length)
-{
- int err = 0, res, r0, r1;
-
- err += zc0301_write_reg(cam, 0x0092, address);
- err += zc0301_write_reg(cam, 0x0090, 0x02);
-
- msleep(1);
-
- res = zc0301_read_reg(cam, 0x0091);
- if (res < 0)
- err += res;
- r0 = zc0301_read_reg(cam, 0x0095);
- if (r0 < 0)
- err += r0;
- r1 = zc0301_read_reg(cam, 0x0096);
- if (r1 < 0)
- err += r1;
-
- res = (length <= 1) ? r0 : r0 | (r1 << 8);
-
- if (err)
- DBG(3, "I2C read failed at address 0x%04X, value: 0x%04X",
- address, res);
-
-
- PDBGG("I2C read: address 0x%04X, value: 0x%04X", address, res);
-
- return err ? -1 : res;
-}
-
-
-int zc0301_i2c_write(struct zc0301_device* cam, u16 address, u16 value)
-{
- int err = 0, res;
-
- err += zc0301_write_reg(cam, 0x0092, address);
- err += zc0301_write_reg(cam, 0x0093, value & 0xff);
- err += zc0301_write_reg(cam, 0x0094, value >> 8);
- err += zc0301_write_reg(cam, 0x0090, 0x01);
-
- msleep(1);
-
- res = zc0301_read_reg(cam, 0x0091);
- if (res < 0)
- err += res;
-
- if (err)
- DBG(3, "I2C write failed at address 0x%04X, value: 0x%04X",
- address, value);
-
- PDBGG("I2C write: address 0x%04X, value: 0x%04X", address, value);
-
- return err ? -1 : 0;
-}
-
-/*****************************************************************************/
-
-static void zc0301_urb_complete(struct urb *urb)
-{
- struct zc0301_device* cam = urb->context;
- struct zc0301_frame_t** f;
- size_t imagesize;
- u8 i;
- int err = 0;
-
- if (urb->status == -ENOENT)
- return;
-
- f = &cam->frame_current;
-
- if (cam->stream == STREAM_INTERRUPT) {
- cam->stream = STREAM_OFF;
- if ((*f))
- (*f)->state = F_QUEUED;
- DBG(3, "Stream interrupted");
- wake_up(&cam->wait_stream);
- }
-
- if (cam->state & DEV_DISCONNECTED)
- return;
-
- if (cam->state & DEV_MISCONFIGURED) {
- wake_up_interruptible(&cam->wait_frame);
- return;
- }
-
- if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue))
- goto resubmit_urb;
-
- if (!(*f))
- (*f) = list_entry(cam->inqueue.next, struct zc0301_frame_t,
- frame);
-
- imagesize = (cam->sensor.pix_format.width *
- cam->sensor.pix_format.height *
- cam->sensor.pix_format.priv) / 8;
-
- for (i = 0; i < urb->number_of_packets; i++) {
- unsigned int len, status;
- void *pos;
- u16* soi;
- u8 sof;
-
- len = urb->iso_frame_desc[i].actual_length;
- status = urb->iso_frame_desc[i].status;
- pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
-
- if (status) {
- DBG(3, "Error in isochronous frame");
- (*f)->state = F_ERROR;
- continue;
- }
-
- sof = (*(soi = pos) == 0xd8ff);
-
- PDBGG("Isochrnous frame: length %u, #%u i,", len, i);
-
- if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR)
-start_of_frame:
- if (sof) {
- (*f)->state = F_GRABBING;
- (*f)->buf.bytesused = 0;
- do_gettimeofday(&(*f)->buf.timestamp);
- DBG(3, "SOF detected: new video frame");
- }
-
- if ((*f)->state == F_GRABBING) {
- if (sof && (*f)->buf.bytesused)
- goto end_of_frame;
-
- if ((*f)->buf.bytesused + len > imagesize) {
- DBG(3, "Video frame size exceeded");
- (*f)->state = F_ERROR;
- continue;
- }
-
- memcpy((*f)->bufmem+(*f)->buf.bytesused, pos, len);
- (*f)->buf.bytesused += len;
-
- if ((*f)->buf.bytesused == imagesize) {
- u32 b;
-end_of_frame:
- b = (*f)->buf.bytesused;
- (*f)->state = F_DONE;
- (*f)->buf.sequence= ++cam->frame_count;
- spin_lock(&cam->queue_lock);
- list_move_tail(&(*f)->frame, &cam->outqueue);
- if (!list_empty(&cam->inqueue))
- (*f) = list_entry(cam->inqueue.next,
- struct zc0301_frame_t,
- frame);
- else
- (*f) = NULL;
- spin_unlock(&cam->queue_lock);
- DBG(3, "Video frame captured: : %lu bytes",
- (unsigned long)(b));
-
- if (!(*f))
- goto resubmit_urb;
-
- if (sof)
- goto start_of_frame;
- }
- }
- }
-
-resubmit_urb:
- urb->dev = cam->usbdev;
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err < 0 && err != -EPERM) {
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "usb_submit_urb() failed");
- }
-
- wake_up_interruptible(&cam->wait_frame);
-}
-
-
-static int zc0301_start_transfer(struct zc0301_device* cam)
-{
- struct usb_device *udev = cam->usbdev;
- struct usb_host_interface* altsetting = usb_altnum_to_altsetting(
- usb_ifnum_to_if(udev, 0),
- ZC0301_ALTERNATE_SETTING);
- const unsigned int psz = le16_to_cpu(altsetting->
- endpoint[0].desc.wMaxPacketSize);
- struct urb* urb;
- s8 i, j;
- int err = 0;
-
- for (i = 0; i < ZC0301_URBS; i++) {
- cam->transfer_buffer[i] = kzalloc(ZC0301_ISO_PACKETS * psz,
- GFP_KERNEL);
- if (!cam->transfer_buffer[i]) {
- err = -ENOMEM;
- DBG(1, "Not enough memory");
- goto free_buffers;
- }
- }
-
- for (i = 0; i < ZC0301_URBS; i++) {
- urb = usb_alloc_urb(ZC0301_ISO_PACKETS, GFP_KERNEL);
- cam->urb[i] = urb;
- if (!urb) {
- err = -ENOMEM;
- DBG(1, "usb_alloc_urb() failed");
- goto free_urbs;
- }
- urb->dev = udev;
- urb->context = cam;
- urb->pipe = usb_rcvisocpipe(udev, 1);
- urb->transfer_flags = URB_ISO_ASAP;
- urb->number_of_packets = ZC0301_ISO_PACKETS;
- urb->complete = zc0301_urb_complete;
- urb->transfer_buffer = cam->transfer_buffer[i];
- urb->transfer_buffer_length = psz * ZC0301_ISO_PACKETS;
- urb->interval = 1;
- for (j = 0; j < ZC0301_ISO_PACKETS; j++) {
- urb->iso_frame_desc[j].offset = psz * j;
- urb->iso_frame_desc[j].length = psz;
- }
- }
-
- err = usb_set_interface(udev, 0, ZC0301_ALTERNATE_SETTING);
- if (err) {
- DBG(1, "usb_set_interface() failed");
- goto free_urbs;
- }
-
- cam->frame_current = NULL;
-
- for (i = 0; i < ZC0301_URBS; i++) {
- err = usb_submit_urb(cam->urb[i], GFP_KERNEL);
- if (err) {
- for (j = i-1; j >= 0; j--)
- usb_kill_urb(cam->urb[j]);
- DBG(1, "usb_submit_urb() failed, error %d", err);
- goto free_urbs;
- }
- }
-
- return 0;
-
-free_urbs:
- for (i = 0; (i < ZC0301_URBS) && cam->urb[i]; i++)
- usb_free_urb(cam->urb[i]);
-
-free_buffers:
- for (i = 0; (i < ZC0301_URBS) && cam->transfer_buffer[i]; i++)
- kfree(cam->transfer_buffer[i]);
-
- return err;
-}
-
-
-static int zc0301_stop_transfer(struct zc0301_device* cam)
-{
- struct usb_device *udev = cam->usbdev;
- s8 i;
- int err = 0;
-
- if (cam->state & DEV_DISCONNECTED)
- return 0;
-
- for (i = ZC0301_URBS-1; i >= 0; i--) {
- usb_kill_urb(cam->urb[i]);
- usb_free_urb(cam->urb[i]);
- kfree(cam->transfer_buffer[i]);
- }
-
- err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */
- if (err)
- DBG(3, "usb_set_interface() failed");
-
- return err;
-}
-
-
-static int zc0301_stream_interrupt(struct zc0301_device* cam)
-{
- long timeout;
-
- cam->stream = STREAM_INTERRUPT;
- timeout = wait_event_timeout(cam->wait_stream,
- (cam->stream == STREAM_OFF) ||
- (cam->state & DEV_DISCONNECTED),
- ZC0301_URB_TIMEOUT);
- if (cam->state & DEV_DISCONNECTED)
- return -ENODEV;
- else if (cam->stream != STREAM_OFF) {
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "URB timeout reached. The camera is misconfigured. To "
- "use it, close and open %s again.",
- video_device_node_name(cam->v4ldev));
- return -EIO;
- }
-
- return 0;
-}
-
-/*****************************************************************************/
-
-static int
-zc0301_set_compression(struct zc0301_device* cam,
- struct v4l2_jpegcompression* compression)
-{
- int r, err = 0;
-
- if ((r = zc0301_read_reg(cam, 0x0008)) < 0)
- err += r;
- err += zc0301_write_reg(cam, 0x0008, r | 0x11 | compression->quality);
-
- return err ? -EIO : 0;
-}
-
-
-static int zc0301_init(struct zc0301_device* cam)
-{
- struct zc0301_sensor* s = &cam->sensor;
- struct v4l2_control ctrl;
- struct v4l2_queryctrl *qctrl;
- struct v4l2_rect* rect;
- u8 i = 0;
- int err = 0;
-
- if (!(cam->state & DEV_INITIALIZED)) {
- mutex_init(&cam->open_mutex);
- init_waitqueue_head(&cam->wait_open);
- qctrl = s->qctrl;
- rect = &(s->cropcap.defrect);
- cam->compression.quality = ZC0301_COMPRESSION_QUALITY;
- } else { /* use current values */
- qctrl = s->_qctrl;
- rect = &(s->_rect);
- }
-
- if (s->init) {
- err = s->init(cam);
- if (err) {
- DBG(3, "Sensor initialization failed");
- return err;
- }
- }
-
- if ((err = zc0301_set_compression(cam, &cam->compression))) {
- DBG(3, "set_compression() failed");
- return err;
- }
-
- if (s->set_crop)
- if ((err = s->set_crop(cam, rect))) {
- DBG(3, "set_crop() failed");
- return err;
- }
-
- if (s->set_ctrl) {
- for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
- if (s->qctrl[i].id != 0 &&
- !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) {
- ctrl.id = s->qctrl[i].id;
- ctrl.value = qctrl[i].default_value;
- err = s->set_ctrl(cam, &ctrl);
- if (err) {
- DBG(3, "Set %s control failed",
- s->qctrl[i].name);
- return err;
- }
- DBG(3, "Image sensor supports '%s' control",
- s->qctrl[i].name);
- }
- }
-
- if (!(cam->state & DEV_INITIALIZED)) {
- mutex_init(&cam->fileop_mutex);
- spin_lock_init(&cam->queue_lock);
- init_waitqueue_head(&cam->wait_frame);
- init_waitqueue_head(&cam->wait_stream);
- cam->nreadbuffers = 2;
- memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl));
- memcpy(&(s->_rect), &(s->cropcap.defrect),
- sizeof(struct v4l2_rect));
- cam->state |= DEV_INITIALIZED;
- }
-
- DBG(2, "Initialization succeeded");
- return 0;
-}
-
-/*****************************************************************************/
-
-static void zc0301_release_resources(struct kref *kref)
-{
- struct zc0301_device *cam = container_of(kref, struct zc0301_device,
- kref);
- DBG(2, "V4L2 device %s deregistered",
- video_device_node_name(cam->v4ldev));
- video_set_drvdata(cam->v4ldev, NULL);
- video_unregister_device(cam->v4ldev);
- usb_put_dev(cam->usbdev);
- kfree(cam->control_buffer);
- kfree(cam);
-}
-
-
-static int zc0301_open(struct file *filp)
-{
- struct zc0301_device* cam;
- int err = 0;
-
- if (!down_read_trylock(&zc0301_dev_lock))
- return -EAGAIN;
-
- cam = video_drvdata(filp);
-
- if (wait_for_completion_interruptible(&cam->probe)) {
- up_read(&zc0301_dev_lock);
- return -ERESTARTSYS;
- }
-
- kref_get(&cam->kref);
-
- if (mutex_lock_interruptible(&cam->open_mutex)) {
- kref_put(&cam->kref, zc0301_release_resources);
- up_read(&zc0301_dev_lock);
- return -ERESTARTSYS;
- }
-
- if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present");
- err = -ENODEV;
- goto out;
- }
-
- if (cam->users) {
- DBG(2, "Device %s is busy...",
- video_device_node_name(cam->v4ldev));
- DBG(3, "Simultaneous opens are not supported");
- if ((filp->f_flags & O_NONBLOCK) ||
- (filp->f_flags & O_NDELAY)) {
- err = -EWOULDBLOCK;
- goto out;
- }
- DBG(2, "A blocking open() has been requested. Wait for the "
- "device to be released...");
- up_read(&zc0301_dev_lock);
- err = wait_event_interruptible_exclusive(cam->wait_open,
- (cam->state & DEV_DISCONNECTED)
- || !cam->users);
- down_read(&zc0301_dev_lock);
- if (err)
- goto out;
- if (cam->state & DEV_DISCONNECTED) {
- err = -ENODEV;
- goto out;
- }
- }
-
- if (cam->state & DEV_MISCONFIGURED) {
- err = zc0301_init(cam);
- if (err) {
- DBG(1, "Initialization failed again. "
- "I will retry on next open().");
- goto out;
- }
- cam->state &= ~DEV_MISCONFIGURED;
- }
-
- if ((err = zc0301_start_transfer(cam)))
- goto out;
-
- filp->private_data = cam;
- cam->users++;
- cam->io = IO_NONE;
- cam->stream = STREAM_OFF;
- cam->nbuffers = 0;
- cam->frame_count = 0;
- zc0301_empty_framequeues(cam);
-
- DBG(3, "Video device %s is open",
- video_device_node_name(cam->v4ldev));
-
-out:
- mutex_unlock(&cam->open_mutex);
- if (err)
- kref_put(&cam->kref, zc0301_release_resources);
- up_read(&zc0301_dev_lock);
- return err;
-}
-
-
-static int zc0301_release(struct file *filp)
-{
- struct zc0301_device* cam;
-
- down_write(&zc0301_dev_lock);
-
- cam = video_drvdata(filp);
-
- zc0301_stop_transfer(cam);
- zc0301_release_buffers(cam);
- cam->users--;
- wake_up_interruptible_nr(&cam->wait_open, 1);
-
- DBG(3, "Video device %s closed",
- video_device_node_name(cam->v4ldev));
-
- kref_put(&cam->kref, zc0301_release_resources);
-
- up_write(&zc0301_dev_lock);
-
- return 0;
-}
-
-
-static ssize_t
-zc0301_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
-{
- struct zc0301_device *cam = video_drvdata(filp);
- struct zc0301_frame_t* f, * i;
- unsigned long lock_flags;
- long timeout;
- int err = 0;
-
- if (mutex_lock_interruptible(&cam->fileop_mutex))
- return -ERESTARTSYS;
-
- if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present");
- mutex_unlock(&cam->fileop_mutex);
- return -ENODEV;
- }
-
- if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it "
- "again.");
- mutex_unlock(&cam->fileop_mutex);
- return -EIO;
- }
-
- if (cam->io == IO_MMAP) {
- DBG(3, "Close and open the device again to choose the read "
- "method");
- mutex_unlock(&cam->fileop_mutex);
- return -EBUSY;
- }
-
- if (cam->io == IO_NONE) {
- if (!zc0301_request_buffers(cam, cam->nreadbuffers, IO_READ)) {
- DBG(1, "read() failed, not enough memory");
- mutex_unlock(&cam->fileop_mutex);
- return -ENOMEM;
- }
- cam->io = IO_READ;
- cam->stream = STREAM_ON;
- }
-
- if (list_empty(&cam->inqueue)) {
- if (!list_empty(&cam->outqueue))
- zc0301_empty_framequeues(cam);
- zc0301_queue_unusedframes(cam);
- }
-
- if (!count) {
- mutex_unlock(&cam->fileop_mutex);
- return 0;
- }
-
- if (list_empty(&cam->outqueue)) {
- if (filp->f_flags & O_NONBLOCK) {
- mutex_unlock(&cam->fileop_mutex);
- return -EAGAIN;
- }
- timeout = wait_event_interruptible_timeout
- ( cam->wait_frame,
- (!list_empty(&cam->outqueue)) ||
- (cam->state & DEV_DISCONNECTED) ||
- (cam->state & DEV_MISCONFIGURED),
- msecs_to_jiffies(
- cam->module_param.frame_timeout * 1000
- )
- );
- if (timeout < 0) {
- mutex_unlock(&cam->fileop_mutex);
- return timeout;
- }
- if (cam->state & DEV_DISCONNECTED) {
- mutex_unlock(&cam->fileop_mutex);
- return -ENODEV;
- }
- if (!timeout || (cam->state & DEV_MISCONFIGURED)) {
- mutex_unlock(&cam->fileop_mutex);
- return -EIO;
- }
- }
-
- f = list_entry(cam->outqueue.prev, struct zc0301_frame_t, frame);
-
- if (count > f->buf.bytesused)
- count = f->buf.bytesused;
-
- if (copy_to_user(buf, f->bufmem, count)) {
- err = -EFAULT;
- goto exit;
- }
- *f_pos += count;
-
-exit:
- spin_lock_irqsave(&cam->queue_lock, lock_flags);
- list_for_each_entry(i, &cam->outqueue, frame)
- i->state = F_UNUSED;
- INIT_LIST_HEAD(&cam->outqueue);
- spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
- zc0301_queue_unusedframes(cam);
-
- PDBGG("Frame #%lu, bytes read: %zu",
- (unsigned long)f->buf.index, count);
-
- mutex_unlock(&cam->fileop_mutex);
-
- return err ? err : count;
-}
-
-
-static unsigned int zc0301_poll(struct file *filp, poll_table *wait)
-{
- struct zc0301_device *cam = video_drvdata(filp);
- struct zc0301_frame_t* f;
- unsigned long lock_flags;
- unsigned int mask = 0;
-
- if (mutex_lock_interruptible(&cam->fileop_mutex))
- return POLLERR;
-
- if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present");
- goto error;
- }
-
- if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it "
- "again.");
- goto error;
- }
-
- if (cam->io == IO_NONE) {
- if (!zc0301_request_buffers(cam, cam->nreadbuffers, IO_READ)) {
- DBG(1, "poll() failed, not enough memory");
- goto error;
- }
- cam->io = IO_READ;
- cam->stream = STREAM_ON;
- }
-
- if (cam->io == IO_READ) {
- spin_lock_irqsave(&cam->queue_lock, lock_flags);
- list_for_each_entry(f, &cam->outqueue, frame)
- f->state = F_UNUSED;
- INIT_LIST_HEAD(&cam->outqueue);
- spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
- zc0301_queue_unusedframes(cam);
- }
-
- poll_wait(filp, &cam->wait_frame, wait);
-
- if (!list_empty(&cam->outqueue))
- mask |= POLLIN | POLLRDNORM;
-
- mutex_unlock(&cam->fileop_mutex);
-
- return mask;
-
-error:
- mutex_unlock(&cam->fileop_mutex);
- return POLLERR;
-}
-
-
-static void zc0301_vm_open(struct vm_area_struct* vma)
-{
- struct zc0301_frame_t* f = vma->vm_private_data;
- f->vma_use_count++;
-}
-
-
-static void zc0301_vm_close(struct vm_area_struct* vma)
-{
- /* NOTE: buffers are not freed here */
- struct zc0301_frame_t* f = vma->vm_private_data;
- f->vma_use_count--;
-}
-
-
-static const struct vm_operations_struct zc0301_vm_ops = {
- .open = zc0301_vm_open,
- .close = zc0301_vm_close,
-};
-
-
-static int zc0301_mmap(struct file* filp, struct vm_area_struct *vma)
-{
- struct zc0301_device *cam = video_drvdata(filp);
- unsigned long size = vma->vm_end - vma->vm_start,
- start = vma->vm_start;
- void *pos;
- u32 i;
-
- if (mutex_lock_interruptible(&cam->fileop_mutex))
- return -ERESTARTSYS;
-
- if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present");
- mutex_unlock(&cam->fileop_mutex);
- return -ENODEV;
- }
-
- if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it "
- "again.");
- mutex_unlock(&cam->fileop_mutex);
- return -EIO;
- }
-
- if (!(vma->vm_flags & (VM_WRITE | VM_READ))) {
- mutex_unlock(&cam->fileop_mutex);
- return -EACCES;
- }
-
- if (cam->io != IO_MMAP ||
- size != PAGE_ALIGN(cam->frame[0].buf.length)) {
- mutex_unlock(&cam->fileop_mutex);
- return -EINVAL;
- }
-
- for (i = 0; i < cam->nbuffers; i++) {
- if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff)
- break;
- }
- if (i == cam->nbuffers) {
- mutex_unlock(&cam->fileop_mutex);
- return -EINVAL;
- }
-
- vma->vm_flags |= VM_IO;
- vma->vm_flags |= VM_RESERVED;
-
- pos = cam->frame[i].bufmem;
- while (size > 0) { /* size is page-aligned */
- if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
- mutex_unlock(&cam->fileop_mutex);
- return -EAGAIN;
- }
- start += PAGE_SIZE;
- pos += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
-
- vma->vm_ops = &zc0301_vm_ops;
- vma->vm_private_data = &cam->frame[i];
- zc0301_vm_open(vma);
-
- mutex_unlock(&cam->fileop_mutex);
-
- return 0;
-}
-
-/*****************************************************************************/
-
-static int
-zc0301_vidioc_querycap(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_capability cap = {
- .driver = "zc0301",
- .version = ZC0301_MODULE_VERSION_CODE,
- .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
- V4L2_CAP_STREAMING,
- };
-
- strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
- if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
- strlcpy(cap.bus_info, dev_name(&cam->usbdev->dev),
- sizeof(cap.bus_info));
-
- if (copy_to_user(arg, &cap, sizeof(cap)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_enuminput(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_input i;
-
- if (copy_from_user(&i, arg, sizeof(i)))
- return -EFAULT;
-
- if (i.index)
- return -EINVAL;
-
- memset(&i, 0, sizeof(i));
- strcpy(i.name, "Camera");
- i.type = V4L2_INPUT_TYPE_CAMERA;
-
- if (copy_to_user(arg, &i, sizeof(i)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_g_input(struct zc0301_device* cam, void __user * arg)
-{
- int index = 0;
-
- if (copy_to_user(arg, &index, sizeof(index)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_s_input(struct zc0301_device* cam, void __user * arg)
-{
- int index;
-
- if (copy_from_user(&index, arg, sizeof(index)))
- return -EFAULT;
-
- if (index != 0)
- return -EINVAL;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_query_ctrl(struct zc0301_device* cam, void __user * arg)
-{
- struct zc0301_sensor* s = &cam->sensor;
- struct v4l2_queryctrl qc;
- u8 i;
-
- if (copy_from_user(&qc, arg, sizeof(qc)))
- return -EFAULT;
-
- for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
- if (qc.id && qc.id == s->qctrl[i].id) {
- memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
- if (copy_to_user(arg, &qc, sizeof(qc)))
- return -EFAULT;
- return 0;
- }
-
- return -EINVAL;
-}
-
-
-static int
-zc0301_vidioc_g_ctrl(struct zc0301_device* cam, void __user * arg)
-{
- struct zc0301_sensor* s = &cam->sensor;
- struct v4l2_control ctrl;
- int err = 0;
- u8 i;
-
- if (!s->get_ctrl && !s->set_ctrl)
- return -EINVAL;
-
- if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
- return -EFAULT;
-
- if (!s->get_ctrl) {
- for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
- if (ctrl.id == s->qctrl[i].id) {
- ctrl.value = s->_qctrl[i].default_value;
- goto exit;
- }
- return -EINVAL;
- } else
- err = s->get_ctrl(cam, &ctrl);
-
-exit:
- if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
- return -EFAULT;
-
- return err;
-}
-
-
-static int
-zc0301_vidioc_s_ctrl(struct zc0301_device* cam, void __user * arg)
-{
- struct zc0301_sensor* s = &cam->sensor;
- struct v4l2_control ctrl;
- u8 i;
- int err = 0;
-
- if (!s->set_ctrl)
- return -EINVAL;
-
- if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
- return -EFAULT;
-
- for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) {
- if (ctrl.id == s->qctrl[i].id) {
- if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)
- return -EINVAL;
- if (ctrl.value < s->qctrl[i].minimum ||
- ctrl.value > s->qctrl[i].maximum)
- return -ERANGE;
- ctrl.value -= ctrl.value % s->qctrl[i].step;
- break;
- }
- }
- if (i == ARRAY_SIZE(s->qctrl))
- return -EINVAL;
- if ((err = s->set_ctrl(cam, &ctrl)))
- return err;
-
- s->_qctrl[i].default_value = ctrl.value;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_cropcap(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_cropcap* cc = &(cam->sensor.cropcap);
-
- cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- cc->pixelaspect.numerator = 1;
- cc->pixelaspect.denominator = 1;
-
- if (copy_to_user(arg, cc, sizeof(*cc)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_g_crop(struct zc0301_device* cam, void __user * arg)
-{
- struct zc0301_sensor* s = &cam->sensor;
- struct v4l2_crop crop = {
- .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
- };
-
- memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
-
- if (copy_to_user(arg, &crop, sizeof(crop)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_s_crop(struct zc0301_device* cam, void __user * arg)
-{
- struct zc0301_sensor* s = &cam->sensor;
- struct v4l2_crop crop;
- struct v4l2_rect* rect;
- struct v4l2_rect* bounds = &(s->cropcap.bounds);
- const enum zc0301_stream_state stream = cam->stream;
- const u32 nbuffers = cam->nbuffers;
- u32 i;
- int err = 0;
-
- if (copy_from_user(&crop, arg, sizeof(crop)))
- return -EFAULT;
-
- rect = &(crop.c);
-
- if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- if (cam->module_param.force_munmap)
- for (i = 0; i < cam->nbuffers; i++)
- if (cam->frame[i].vma_use_count) {
- DBG(3, "VIDIOC_S_CROP failed. "
- "Unmap the buffers first.");
- return -EBUSY;
- }
-
- if (!s->set_crop) {
- memcpy(rect, &(s->_rect), sizeof(*rect));
- if (copy_to_user(arg, &crop, sizeof(crop)))
- return -EFAULT;
- return 0;
- }
-
- rect->left &= ~7L;
- rect->top &= ~7L;
- if (rect->width < 8)
- rect->width = 8;
- if (rect->height < 8)
- rect->height = 8;
- if (rect->width > bounds->width)
- rect->width = bounds->width;
- if (rect->height > bounds->height)
- rect->height = bounds->height;
- if (rect->left < bounds->left)
- rect->left = bounds->left;
- if (rect->top < bounds->top)
- rect->top = bounds->top;
- if (rect->left + rect->width > bounds->left + bounds->width)
- rect->left = bounds->left+bounds->width - rect->width;
- if (rect->top + rect->height > bounds->top + bounds->height)
- rect->top = bounds->top+bounds->height - rect->height;
- rect->width &= ~7L;
- rect->height &= ~7L;
-
- if (cam->stream == STREAM_ON)
- if ((err = zc0301_stream_interrupt(cam)))
- return err;
-
- if (copy_to_user(arg, &crop, sizeof(crop))) {
- cam->stream = stream;
- return -EFAULT;
- }
-
- if (cam->module_param.force_munmap || cam->io == IO_READ)
- zc0301_release_buffers(cam);
-
- if (s->set_crop)
- err += s->set_crop(cam, rect);
-
- if (err) { /* atomic, no rollback in ioctl() */
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
- "use the camera, close and open %s again.",
- video_device_node_name(cam->v4ldev));
- return -EIO;
- }
-
- s->pix_format.width = rect->width;
- s->pix_format.height = rect->height;
- memcpy(&(s->_rect), rect, sizeof(*rect));
-
- if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
- nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) {
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
- "use the camera, close and open %s again.",
- video_device_node_name(cam->v4ldev));
- return -ENOMEM;
- }
-
- if (cam->io == IO_READ)
- zc0301_empty_framequeues(cam);
- else if (cam->module_param.force_munmap)
- zc0301_requeue_outqueue(cam);
-
- cam->stream = stream;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_enum_framesizes(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_frmsizeenum frmsize;
-
- if (copy_from_user(&frmsize, arg, sizeof(frmsize)))
- return -EFAULT;
-
- if (frmsize.index != 0 && frmsize.index != 1)
- return -EINVAL;
-
- if (frmsize.pixel_format != V4L2_PIX_FMT_JPEG)
- return -EINVAL;
-
- frmsize.type = V4L2_FRMSIZE_TYPE_DISCRETE;
-
- if (frmsize.index == 1) {
- frmsize.discrete.width = cam->sensor.cropcap.defrect.width;
- frmsize.discrete.height = cam->sensor.cropcap.defrect.height;
- }
- memset(&frmsize.reserved, 0, sizeof(frmsize.reserved));
-
- if (copy_to_user(arg, &frmsize, sizeof(frmsize)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_enum_fmt(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_fmtdesc fmtd;
-
- if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
- return -EFAULT;
-
- if (fmtd.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- if (fmtd.index == 0) {
- strcpy(fmtd.description, "JPEG");
- fmtd.pixelformat = V4L2_PIX_FMT_JPEG;
- fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
- } else
- return -EINVAL;
-
- fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
-
- if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_g_fmt(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_format format;
- struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format);
-
- if (copy_from_user(&format, arg, sizeof(format)))
- return -EFAULT;
-
- if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- pfmt->bytesperline = 0;
- pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
- pfmt->field = V4L2_FIELD_NONE;
- memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
-
- if (copy_to_user(arg, &format, sizeof(format)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd,
- void __user * arg)
-{
- struct zc0301_sensor* s = &cam->sensor;
- struct v4l2_format format;
- struct v4l2_pix_format* pix;
- struct v4l2_pix_format* pfmt = &(s->pix_format);
- struct v4l2_rect* bounds = &(s->cropcap.bounds);
- struct v4l2_rect rect;
- const enum zc0301_stream_state stream = cam->stream;
- const u32 nbuffers = cam->nbuffers;
- u32 i;
- int err = 0;
-
- if (copy_from_user(&format, arg, sizeof(format)))
- return -EFAULT;
-
- pix = &(format.fmt.pix);
-
- if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- memcpy(&rect, &(s->_rect), sizeof(rect));
-
- if (!s->set_crop) {
- pix->width = rect.width;
- pix->height = rect.height;
- } else {
- rect.width = pix->width;
- rect.height = pix->height;
- }
-
- if (rect.width < 8)
- rect.width = 8;
- if (rect.height < 8)
- rect.height = 8;
- if (rect.width > bounds->left + bounds->width - rect.left)
- rect.width = bounds->left + bounds->width - rect.left;
- if (rect.height > bounds->top + bounds->height - rect.top)
- rect.height = bounds->top + bounds->height - rect.top;
- rect.width &= ~7L;
- rect.height &= ~7L;
-
- pix->width = rect.width;
- pix->height = rect.height;
- pix->pixelformat = pfmt->pixelformat;
- pix->priv = pfmt->priv;
- pix->colorspace = pfmt->colorspace;
- pix->bytesperline = 0;
- pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
- pix->field = V4L2_FIELD_NONE;
-
- if (cmd == VIDIOC_TRY_FMT) {
- if (copy_to_user(arg, &format, sizeof(format)))
- return -EFAULT;
- return 0;
- }
-
- if (cam->module_param.force_munmap)
- for (i = 0; i < cam->nbuffers; i++)
- if (cam->frame[i].vma_use_count) {
- DBG(3, "VIDIOC_S_FMT failed. "
- "Unmap the buffers first.");
- return -EBUSY;
- }
-
- if (cam->stream == STREAM_ON)
- if ((err = zc0301_stream_interrupt(cam)))
- return err;
-
- if (copy_to_user(arg, &format, sizeof(format))) {
- cam->stream = stream;
- return -EFAULT;
- }
-
- if (cam->module_param.force_munmap || cam->io == IO_READ)
- zc0301_release_buffers(cam);
-
- if (s->set_crop)
- err += s->set_crop(cam, &rect);
-
- if (err) { /* atomic, no rollback in ioctl() */
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
- "use the camera, close and open %s again.",
- video_device_node_name(cam->v4ldev));
- return -EIO;
- }
-
- memcpy(pfmt, pix, sizeof(*pix));
- memcpy(&(s->_rect), &rect, sizeof(rect));
-
- if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
- nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) {
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
- "use the camera, close and open %s again.",
- video_device_node_name(cam->v4ldev));
- return -ENOMEM;
- }
-
- if (cam->io == IO_READ)
- zc0301_empty_framequeues(cam);
- else if (cam->module_param.force_munmap)
- zc0301_requeue_outqueue(cam);
-
- cam->stream = stream;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_g_jpegcomp(struct zc0301_device* cam, void __user * arg)
-{
- if (copy_to_user(arg, &cam->compression, sizeof(cam->compression)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_s_jpegcomp(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_jpegcompression jc;
- const enum zc0301_stream_state stream = cam->stream;
- int err = 0;
-
- if (copy_from_user(&jc, arg, sizeof(jc)))
- return -EFAULT;
-
- if (jc.quality != 0)
- return -EINVAL;
-
- if (cam->stream == STREAM_ON)
- if ((err = zc0301_stream_interrupt(cam)))
- return err;
-
- err += zc0301_set_compression(cam, &jc);
- if (err) { /* atomic, no rollback in ioctl() */
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
- "problems. To use the camera, close and open %s again.",
- video_device_node_name(cam->v4ldev));
- return -EIO;
- }
-
- cam->compression.quality = jc.quality;
-
- cam->stream = stream;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_reqbufs(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_requestbuffers rb;
- u32 i;
- int err;
-
- if (copy_from_user(&rb, arg, sizeof(rb)))
- return -EFAULT;
-
- if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
- rb.memory != V4L2_MEMORY_MMAP)
- return -EINVAL;
-
- if (cam->io == IO_READ) {
- DBG(3, "Close and open the device again to choose the mmap "
- "I/O method");
- return -EBUSY;
- }
-
- for (i = 0; i < cam->nbuffers; i++)
- if (cam->frame[i].vma_use_count) {
- DBG(3, "VIDIOC_REQBUFS failed. "
- "Previous buffers are still mapped.");
- return -EBUSY;
- }
-
- if (cam->stream == STREAM_ON)
- if ((err = zc0301_stream_interrupt(cam)))
- return err;
-
- zc0301_empty_framequeues(cam);
-
- zc0301_release_buffers(cam);
- if (rb.count)
- rb.count = zc0301_request_buffers(cam, rb.count, IO_MMAP);
-
- if (copy_to_user(arg, &rb, sizeof(rb))) {
- zc0301_release_buffers(cam);
- cam->io = IO_NONE;
- return -EFAULT;
- }
-
- cam->io = rb.count ? IO_MMAP : IO_NONE;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_querybuf(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_buffer b;
-
- if (copy_from_user(&b, arg, sizeof(b)))
- return -EFAULT;
-
- if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
- b.index >= cam->nbuffers || cam->io != IO_MMAP)
- return -EINVAL;
-
- memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
-
- if (cam->frame[b.index].vma_use_count)
- b.flags |= V4L2_BUF_FLAG_MAPPED;
-
- if (cam->frame[b.index].state == F_DONE)
- b.flags |= V4L2_BUF_FLAG_DONE;
- else if (cam->frame[b.index].state != F_UNUSED)
- b.flags |= V4L2_BUF_FLAG_QUEUED;
-
- if (copy_to_user(arg, &b, sizeof(b)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_qbuf(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_buffer b;
- unsigned long lock_flags;
-
- if (copy_from_user(&b, arg, sizeof(b)))
- return -EFAULT;
-
- if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
- b.index >= cam->nbuffers || cam->io != IO_MMAP)
- return -EINVAL;
-
- if (cam->frame[b.index].state != F_UNUSED)
- return -EINVAL;
-
- cam->frame[b.index].state = F_QUEUED;
-
- spin_lock_irqsave(&cam->queue_lock, lock_flags);
- list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
- spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
- PDBGG("Frame #%lu queued", (unsigned long)b.index);
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_dqbuf(struct zc0301_device* cam, struct file* filp,
- void __user * arg)
-{
- struct v4l2_buffer b;
- struct zc0301_frame_t *f;
- unsigned long lock_flags;
- long timeout;
-
- if (copy_from_user(&b, arg, sizeof(b)))
- return -EFAULT;
-
- if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP)
- return -EINVAL;
-
- if (list_empty(&cam->outqueue)) {
- if (cam->stream == STREAM_OFF)
- return -EINVAL;
- if (filp->f_flags & O_NONBLOCK)
- return -EAGAIN;
- timeout = wait_event_interruptible_timeout
- ( cam->wait_frame,
- (!list_empty(&cam->outqueue)) ||
- (cam->state & DEV_DISCONNECTED) ||
- (cam->state & DEV_MISCONFIGURED),
- cam->module_param.frame_timeout *
- 1000 * msecs_to_jiffies(1) );
- if (timeout < 0)
- return timeout;
- if (cam->state & DEV_DISCONNECTED)
- return -ENODEV;
- if (!timeout || (cam->state & DEV_MISCONFIGURED))
- return -EIO;
- }
-
- spin_lock_irqsave(&cam->queue_lock, lock_flags);
- f = list_entry(cam->outqueue.next, struct zc0301_frame_t, frame);
- list_del(cam->outqueue.next);
- spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
- f->state = F_UNUSED;
-
- memcpy(&b, &f->buf, sizeof(b));
- if (f->vma_use_count)
- b.flags |= V4L2_BUF_FLAG_MAPPED;
-
- if (copy_to_user(arg, &b, sizeof(b)))
- return -EFAULT;
-
- PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index);
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_streamon(struct zc0301_device* cam, void __user * arg)
-{
- int type;
-
- if (copy_from_user(&type, arg, sizeof(type)))
- return -EFAULT;
-
- if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
- return -EINVAL;
-
- cam->stream = STREAM_ON;
-
- DBG(3, "Stream on");
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_streamoff(struct zc0301_device* cam, void __user * arg)
-{
- int type, err;
-
- if (copy_from_user(&type, arg, sizeof(type)))
- return -EFAULT;
-
- if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
- return -EINVAL;
-
- if (cam->stream == STREAM_ON)
- if ((err = zc0301_stream_interrupt(cam)))
- return err;
-
- zc0301_empty_framequeues(cam);
-
- DBG(3, "Stream off");
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_g_parm(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_streamparm sp;
-
- if (copy_from_user(&sp, arg, sizeof(sp)))
- return -EFAULT;
-
- if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- sp.parm.capture.extendedmode = 0;
- sp.parm.capture.readbuffers = cam->nreadbuffers;
-
- if (copy_to_user(arg, &sp, sizeof(sp)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_s_parm(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_streamparm sp;
-
- if (copy_from_user(&sp, arg, sizeof(sp)))
- return -EFAULT;
-
- if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- sp.parm.capture.extendedmode = 0;
-
- if (sp.parm.capture.readbuffers == 0)
- sp.parm.capture.readbuffers = cam->nreadbuffers;
-
- if (sp.parm.capture.readbuffers > ZC0301_MAX_FRAMES)
- sp.parm.capture.readbuffers = ZC0301_MAX_FRAMES;
-
- if (copy_to_user(arg, &sp, sizeof(sp)))
- return -EFAULT;
-
- cam->nreadbuffers = sp.parm.capture.readbuffers;
-
- return 0;
-}
-
-
-static long zc0301_ioctl_v4l2(struct file *filp,
- unsigned int cmd, void __user *arg)
-{
- struct zc0301_device *cam = video_drvdata(filp);
-
- switch (cmd) {
-
- case VIDIOC_QUERYCAP:
- return zc0301_vidioc_querycap(cam, arg);
-
- case VIDIOC_ENUMINPUT:
- return zc0301_vidioc_enuminput(cam, arg);
-
- case VIDIOC_G_INPUT:
- return zc0301_vidioc_g_input(cam, arg);
-
- case VIDIOC_S_INPUT:
- return zc0301_vidioc_s_input(cam, arg);
-
- case VIDIOC_QUERYCTRL:
- return zc0301_vidioc_query_ctrl(cam, arg);
-
- case VIDIOC_G_CTRL:
- return zc0301_vidioc_g_ctrl(cam, arg);
-
- case VIDIOC_S_CTRL:
- return zc0301_vidioc_s_ctrl(cam, arg);
-
- case VIDIOC_CROPCAP:
- return zc0301_vidioc_cropcap(cam, arg);
-
- case VIDIOC_G_CROP:
- return zc0301_vidioc_g_crop(cam, arg);
-
- case VIDIOC_S_CROP:
- return zc0301_vidioc_s_crop(cam, arg);
-
- case VIDIOC_ENUM_FMT:
- return zc0301_vidioc_enum_fmt(cam, arg);
-
- case VIDIOC_G_FMT:
- return zc0301_vidioc_g_fmt(cam, arg);
-
- case VIDIOC_TRY_FMT:
- case VIDIOC_S_FMT:
- return zc0301_vidioc_try_s_fmt(cam, cmd, arg);
-
- case VIDIOC_ENUM_FRAMESIZES:
- return zc0301_vidioc_enum_framesizes(cam, arg);
-
- case VIDIOC_G_JPEGCOMP:
- return zc0301_vidioc_g_jpegcomp(cam, arg);
-
- case VIDIOC_S_JPEGCOMP:
- return zc0301_vidioc_s_jpegcomp(cam, arg);
-
- case VIDIOC_REQBUFS:
- return zc0301_vidioc_reqbufs(cam, arg);
-
- case VIDIOC_QUERYBUF:
- return zc0301_vidioc_querybuf(cam, arg);
-
- case VIDIOC_QBUF:
- return zc0301_vidioc_qbuf(cam, arg);
-
- case VIDIOC_DQBUF:
- return zc0301_vidioc_dqbuf(cam, filp, arg);
-
- case VIDIOC_STREAMON:
- return zc0301_vidioc_streamon(cam, arg);
-
- case VIDIOC_STREAMOFF:
- return zc0301_vidioc_streamoff(cam, arg);
-
- case VIDIOC_G_PARM:
- return zc0301_vidioc_g_parm(cam, arg);
-
- case VIDIOC_S_PARM:
- return zc0301_vidioc_s_parm(cam, arg);
-
- case VIDIOC_G_STD:
- case VIDIOC_S_STD:
- case VIDIOC_QUERYSTD:
- case VIDIOC_ENUMSTD:
- case VIDIOC_QUERYMENU:
- case VIDIOC_ENUM_FRAMEINTERVALS:
- return -EINVAL;
-
- default:
- return -EINVAL;
-
- }
-}
-
-
-static long zc0301_ioctl(struct file *filp,
- unsigned int cmd, unsigned long arg)
-{
- struct zc0301_device *cam = video_drvdata(filp);
- int err = 0;
-
- if (mutex_lock_interruptible(&cam->fileop_mutex))
- return -ERESTARTSYS;
-
- if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present");
- mutex_unlock(&cam->fileop_mutex);
- return -ENODEV;
- }
-
- if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it "
- "again.");
- mutex_unlock(&cam->fileop_mutex);
- return -EIO;
- }
-
- V4LDBG(3, "zc0301", cmd);
-
- err = zc0301_ioctl_v4l2(filp, cmd, (void __user *)arg);
-
- mutex_unlock(&cam->fileop_mutex);
-
- return err;
-}
-
-
-static const struct v4l2_file_operations zc0301_fops = {
- .owner = THIS_MODULE,
- .open = zc0301_open,
- .release = zc0301_release,
- .ioctl = zc0301_ioctl,
- .read = zc0301_read,
- .poll = zc0301_poll,
- .mmap = zc0301_mmap,
-};
-
-/*****************************************************************************/
-
-static int
-zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
-{
- struct usb_device *udev = interface_to_usbdev(intf);
- struct zc0301_device* cam;
- static unsigned int dev_nr;
- unsigned int i;
- int err = 0;
-
- if (!(cam = kzalloc(sizeof(struct zc0301_device), GFP_KERNEL)))
- return -ENOMEM;
-
- cam->usbdev = udev;
-
- if (!(cam->control_buffer = kzalloc(4, GFP_KERNEL))) {
- DBG(1, "kmalloc() failed");
- err = -ENOMEM;
- goto fail;
- }
-
- if (!(cam->v4ldev = video_device_alloc())) {
- DBG(1, "video_device_alloc() failed");
- err = -ENOMEM;
- goto fail;
- }
-
- DBG(2, "ZC0301[P] Image Processor and Control Chip detected "
- "(vid/pid 0x%04X:0x%04X)",id->idVendor, id->idProduct);
-
- for (i = 0; zc0301_sensor_table[i]; i++) {
- err = zc0301_sensor_table[i](cam);
- if (!err)
- break;
- }
-
- if (!err)
- DBG(2, "%s image sensor detected", cam->sensor.name);
- else {
- DBG(1, "No supported image sensor detected");
- err = -ENODEV;
- goto fail;
- }
-
- if (zc0301_init(cam)) {
- DBG(1, "Initialization failed. I will retry on open().");
- cam->state |= DEV_MISCONFIGURED;
- }
-
- strcpy(cam->v4ldev->name, "ZC0301[P] PC Camera");
- cam->v4ldev->fops = &zc0301_fops;
- cam->v4ldev->release = video_device_release;
- cam->v4ldev->parent = &udev->dev;
- video_set_drvdata(cam->v4ldev, cam);
-
- init_completion(&cam->probe);
-
- err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
- video_nr[dev_nr]);
- if (err) {
- DBG(1, "V4L2 device registration failed");
- if (err == -ENFILE && video_nr[dev_nr] == -1)
- DBG(1, "Free /dev/videoX node not found");
- video_nr[dev_nr] = -1;
- dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0;
- complete_all(&cam->probe);
- goto fail;
- }
-
- DBG(2, "V4L2 device registered as %s",
- video_device_node_name(cam->v4ldev));
-
- cam->module_param.force_munmap = force_munmap[dev_nr];
- cam->module_param.frame_timeout = frame_timeout[dev_nr];
-
- dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0;
-
- usb_set_intfdata(intf, cam);
- kref_init(&cam->kref);
- usb_get_dev(cam->usbdev);
-
- complete_all(&cam->probe);
-
- return 0;
-
-fail:
- if (cam) {
- kfree(cam->control_buffer);
- if (cam->v4ldev)
- video_device_release(cam->v4ldev);
- kfree(cam);
- }
- return err;
-}
-
-
-static void zc0301_usb_disconnect(struct usb_interface* intf)
-{
- struct zc0301_device* cam;
-
- down_write(&zc0301_dev_lock);
-
- cam = usb_get_intfdata(intf);
-
- DBG(2, "Disconnecting %s...", cam->v4ldev->name);
-
- if (cam->users) {
- DBG(2, "Device %s is open! Deregistration and "
- "memory deallocation are deferred.",
- video_device_node_name(cam->v4ldev));
- cam->state |= DEV_MISCONFIGURED;
- zc0301_stop_transfer(cam);
- cam->state |= DEV_DISCONNECTED;
- wake_up_interruptible(&cam->wait_frame);
- wake_up(&cam->wait_stream);
- } else
- cam->state |= DEV_DISCONNECTED;
-
- wake_up_interruptible_all(&cam->wait_open);
-
- kref_put(&cam->kref, zc0301_release_resources);
-
- up_write(&zc0301_dev_lock);
-}
-
-
-static struct usb_driver zc0301_usb_driver = {
- .name = "zc0301",
- .id_table = zc0301_id_table,
- .probe = zc0301_usb_probe,
- .disconnect = zc0301_usb_disconnect,
-};
-
-/*****************************************************************************/
-
-static int __init zc0301_module_init(void)
-{
- int err = 0;
-
- KDBG(2, ZC0301_MODULE_NAME " v" ZC0301_MODULE_VERSION);
- KDBG(3, ZC0301_MODULE_AUTHOR);
-
- if ((err = usb_register(&zc0301_usb_driver)))
- KDBG(1, "usb_register() failed");
-
- return err;
-}
-
-
-static void __exit zc0301_module_exit(void)
-{
- usb_deregister(&zc0301_usb_driver);
-}
-
-
-module_init(zc0301_module_init);
-module_exit(zc0301_module_exit);
diff --git a/drivers/media/video/zc0301/zc0301_pas202bcb.c b/drivers/media/video/zc0301/zc0301_pas202bcb.c
deleted file mode 100644
index 24b0dfb..0000000
--- a/drivers/media/video/zc0301/zc0301_pas202bcb.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/***************************************************************************
- * Plug-in for PAS202BCB image sensor connected to the ZC0301 Image *
- * Processor and Control Chip *
- * *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> *
- * *
- * Initialization values of the ZC0301[P] have been taken from the SPCA5XX *
- * driver maintained by Michel Xhaard <mxhaard@magic.fr> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the Free Software *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
- ***************************************************************************/
-
-/*
- NOTE: Sensor controls are disabled for now, becouse changing them while
- streaming sometimes results in out-of-sync video frames. We'll use
- the default initialization, until we know how to stop and start video
- in the chip. However, the image quality still looks good under various
- light conditions.
-*/
-
-#include <linux/delay.h>
-#include "zc0301_sensor.h"
-
-
-static struct zc0301_sensor pas202bcb;
-
-
-static int pas202bcb_init(struct zc0301_device* cam)
-{
- int err = 0;
-
- err += zc0301_write_reg(cam, 0x0002, 0x00);
- err += zc0301_write_reg(cam, 0x0003, 0x02);
- err += zc0301_write_reg(cam, 0x0004, 0x80);
- err += zc0301_write_reg(cam, 0x0005, 0x01);
- err += zc0301_write_reg(cam, 0x0006, 0xE0);
- err += zc0301_write_reg(cam, 0x0098, 0x00);
- err += zc0301_write_reg(cam, 0x009A, 0x03);
- err += zc0301_write_reg(cam, 0x011A, 0x00);
- err += zc0301_write_reg(cam, 0x011C, 0x03);
- err += zc0301_write_reg(cam, 0x009B, 0x01);
- err += zc0301_write_reg(cam, 0x009C, 0xE6);
- err += zc0301_write_reg(cam, 0x009D, 0x02);
- err += zc0301_write_reg(cam, 0x009E, 0x86);
-
- err += zc0301_i2c_write(cam, 0x02, 0x02);
- err += zc0301_i2c_write(cam, 0x0A, 0x01);
- err += zc0301_i2c_write(cam, 0x0B, 0x01);
- err += zc0301_i2c_write(cam, 0x0D, 0x00);
- err += zc0301_i2c_write(cam, 0x12, 0x05);
- err += zc0301_i2c_write(cam, 0x13, 0x63);
- err += zc0301_i2c_write(cam, 0x15, 0x70);
-
- err += zc0301_write_reg(cam, 0x0101, 0xB7);
- err += zc0301_write_reg(cam, 0x0100, 0x0D);
- err += zc0301_write_reg(cam, 0x0189, 0x06);
- err += zc0301_write_reg(cam, 0x01AD, 0x00);
- err += zc0301_write_reg(cam, 0x01C5, 0x03);
- err += zc0301_write_reg(cam, 0x01CB, 0x13);
- err += zc0301_write_reg(cam, 0x0250, 0x08);
- err += zc0301_write_reg(cam, 0x0301, 0x08);
- err += zc0301_write_reg(cam, 0x018D, 0x70);
- err += zc0301_write_reg(cam, 0x0008, 0x03);
- err += zc0301_write_reg(cam, 0x01C6, 0x04);
- err += zc0301_write_reg(cam, 0x01CB, 0x07);
- err += zc0301_write_reg(cam, 0x0120, 0x11);
- err += zc0301_write_reg(cam, 0x0121, 0x37);
- err += zc0301_write_reg(cam, 0x0122, 0x58);
- err += zc0301_write_reg(cam, 0x0123, 0x79);
- err += zc0301_write_reg(cam, 0x0124, 0x91);
- err += zc0301_write_reg(cam, 0x0125, 0xA6);
- err += zc0301_write_reg(cam, 0x0126, 0xB8);
- err += zc0301_write_reg(cam, 0x0127, 0xC7);
- err += zc0301_write_reg(cam, 0x0128, 0xD3);
- err += zc0301_write_reg(cam, 0x0129, 0xDE);
- err += zc0301_write_reg(cam, 0x012A, 0xE6);
- err += zc0301_write_reg(cam, 0x012B, 0xED);
- err += zc0301_write_reg(cam, 0x012C, 0xF3);
- err += zc0301_write_reg(cam, 0x012D, 0xF8);
- err += zc0301_write_reg(cam, 0x012E, 0xFB);
- err += zc0301_write_reg(cam, 0x012F, 0xFF);
- err += zc0301_write_reg(cam, 0x0130, 0x26);
- err += zc0301_write_reg(cam, 0x0131, 0x23);
- err += zc0301_write_reg(cam, 0x0132, 0x20);
- err += zc0301_write_reg(cam, 0x0133, 0x1C);
- err += zc0301_write_reg(cam, 0x0134, 0x16);
- err += zc0301_write_reg(cam, 0x0135, 0x13);
- err += zc0301_write_reg(cam, 0x0136, 0x10);
- err += zc0301_write_reg(cam, 0x0137, 0x0D);
- err += zc0301_write_reg(cam, 0x0138, 0x0B);
- err += zc0301_write_reg(cam, 0x0139, 0x09);
- err += zc0301_write_reg(cam, 0x013A, 0x07);
- err += zc0301_write_reg(cam, 0x013B, 0x06);
- err += zc0301_write_reg(cam, 0x013C, 0x05);
- err += zc0301_write_reg(cam, 0x013D, 0x04);
- err += zc0301_write_reg(cam, 0x013E, 0x03);
- err += zc0301_write_reg(cam, 0x013F, 0x02);
- err += zc0301_write_reg(cam, 0x010A, 0x4C);
- err += zc0301_write_reg(cam, 0x010B, 0xF5);
- err += zc0301_write_reg(cam, 0x010C, 0xFF);
- err += zc0301_write_reg(cam, 0x010D, 0xF9);
- err += zc0301_write_reg(cam, 0x010E, 0x51);
- err += zc0301_write_reg(cam, 0x010F, 0xF5);
- err += zc0301_write_reg(cam, 0x0110, 0xFB);
- err += zc0301_write_reg(cam, 0x0111, 0xED);
- err += zc0301_write_reg(cam, 0x0112, 0x5F);
- err += zc0301_write_reg(cam, 0x0180, 0x00);
- err += zc0301_write_reg(cam, 0x0019, 0x00);
- err += zc0301_write_reg(cam, 0x0087, 0x20);
- err += zc0301_write_reg(cam, 0x0088, 0x21);
-
- err += zc0301_i2c_write(cam, 0x20, 0x02);
- err += zc0301_i2c_write(cam, 0x21, 0x1B);
- err += zc0301_i2c_write(cam, 0x03, 0x44);
- err += zc0301_i2c_write(cam, 0x0E, 0x01);
- err += zc0301_i2c_write(cam, 0x0F, 0x00);
-
- err += zc0301_write_reg(cam, 0x01A9, 0x14);
- err += zc0301_write_reg(cam, 0x01AA, 0x24);
- err += zc0301_write_reg(cam, 0x0190, 0x00);
- err += zc0301_write_reg(cam, 0x0191, 0x02);
- err += zc0301_write_reg(cam, 0x0192, 0x1B);
- err += zc0301_write_reg(cam, 0x0195, 0x00);
- err += zc0301_write_reg(cam, 0x0196, 0x00);
- err += zc0301_write_reg(cam, 0x0197, 0x4D);
- err += zc0301_write_reg(cam, 0x018C, 0x10);
- err += zc0301_write_reg(cam, 0x018F, 0x20);
- err += zc0301_write_reg(cam, 0x001D, 0x44);
- err += zc0301_write_reg(cam, 0x001E, 0x6F);
- err += zc0301_write_reg(cam, 0x001F, 0xAD);
- err += zc0301_write_reg(cam, 0x0020, 0xEB);
- err += zc0301_write_reg(cam, 0x0087, 0x0F);
- err += zc0301_write_reg(cam, 0x0088, 0x0E);
- err += zc0301_write_reg(cam, 0x0180, 0x40);
- err += zc0301_write_reg(cam, 0x0192, 0x1B);
- err += zc0301_write_reg(cam, 0x0191, 0x02);
- err += zc0301_write_reg(cam, 0x0190, 0x00);
- err += zc0301_write_reg(cam, 0x0116, 0x1D);
- err += zc0301_write_reg(cam, 0x0117, 0x40);
- err += zc0301_write_reg(cam, 0x0118, 0x99);
- err += zc0301_write_reg(cam, 0x0180, 0x42);
- err += zc0301_write_reg(cam, 0x0116, 0x1D);
- err += zc0301_write_reg(cam, 0x0117, 0x40);
- err += zc0301_write_reg(cam, 0x0118, 0x99);
- err += zc0301_write_reg(cam, 0x0007, 0x00);
-
- err += zc0301_i2c_write(cam, 0x11, 0x01);
-
- msleep(100);
-
- return err;
-}
-
-
-static int pas202bcb_get_ctrl(struct zc0301_device* cam,
- struct v4l2_control* ctrl)
-{
- switch (ctrl->id) {
- case V4L2_CID_EXPOSURE:
- {
- int r1 = zc0301_i2c_read(cam, 0x04, 1),
- r2 = zc0301_i2c_read(cam, 0x05, 1);
- if (r1 < 0 || r2 < 0)
- return -EIO;
- ctrl->value = (r1 << 6) | (r2 & 0x3f);
- }
- return 0;
- case V4L2_CID_RED_BALANCE:
- if ((ctrl->value = zc0301_i2c_read(cam, 0x09, 1)) < 0)
- return -EIO;
- ctrl->value &= 0x0f;
- return 0;
- case V4L2_CID_BLUE_BALANCE:
- if ((ctrl->value = zc0301_i2c_read(cam, 0x07, 1)) < 0)
- return -EIO;
- ctrl->value &= 0x0f;
- return 0;
- case V4L2_CID_GAIN:
- if ((ctrl->value = zc0301_i2c_read(cam, 0x10, 1)) < 0)
- return -EIO;
- ctrl->value &= 0x1f;
- return 0;
- case ZC0301_V4L2_CID_GREEN_BALANCE:
- if ((ctrl->value = zc0301_i2c_read(cam, 0x08, 1)) < 0)
- return -EIO;
- ctrl->value &= 0x0f;
- return 0;
- case ZC0301_V4L2_CID_DAC_MAGNITUDE:
- if ((ctrl->value = zc0301_i2c_read(cam, 0x0c, 1)) < 0)
- return -EIO;
- return 0;
- default:
- return -EINVAL;
- }
-}
-
-
-static int pas202bcb_set_ctrl(struct zc0301_device* cam,
- const struct v4l2_control* ctrl)
-{
- int err = 0;
-
- switch (ctrl->id) {
- case V4L2_CID_EXPOSURE:
- err += zc0301_i2c_write(cam, 0x04, ctrl->value >> 6);
- err += zc0301_i2c_write(cam, 0x05, ctrl->value & 0x3f);
- break;
- case V4L2_CID_RED_BALANCE:
- err += zc0301_i2c_write(cam, 0x09, ctrl->value);
- break;
- case V4L2_CID_BLUE_BALANCE:
- err += zc0301_i2c_write(cam, 0x07, ctrl->value);
- break;
- case V4L2_CID_GAIN:
- err += zc0301_i2c_write(cam, 0x10, ctrl->value);
- break;
- case ZC0301_V4L2_CID_GREEN_BALANCE:
- err += zc0301_i2c_write(cam, 0x08, ctrl->value);
- break;
- case ZC0301_V4L2_CID_DAC_MAGNITUDE:
- err += zc0301_i2c_write(cam, 0x0c, ctrl->value);
- break;
- default:
- return -EINVAL;
- }
- err += zc0301_i2c_write(cam, 0x11, 0x01);
-
- return err ? -EIO : 0;
-}
-
-
-static struct zc0301_sensor pas202bcb = {
- .name = "PAS202BCB",
- .init = &pas202bcb_init,
- .qctrl = {
- {
- .id = V4L2_CID_EXPOSURE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "exposure",
- .minimum = 0x01e5,
- .maximum = 0x3fff,
- .step = 0x0001,
- .default_value = 0x01e5,
- .flags = V4L2_CTRL_FLAG_DISABLED,
- },
- {
- .id = V4L2_CID_GAIN,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "global gain",
- .minimum = 0x00,
- .maximum = 0x1f,
- .step = 0x01,
- .default_value = 0x0c,
- .flags = V4L2_CTRL_FLAG_DISABLED,
- },
- {
- .id = ZC0301_V4L2_CID_DAC_MAGNITUDE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "DAC magnitude",
- .minimum = 0x00,
- .maximum = 0xff,
- .step = 0x01,
- .default_value = 0x00,
- .flags = V4L2_CTRL_FLAG_DISABLED,
- },
- {
- .id = V4L2_CID_RED_BALANCE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "red balance",
- .minimum = 0x00,
- .maximum = 0x0f,
- .step = 0x01,
- .default_value = 0x01,
- .flags = V4L2_CTRL_FLAG_DISABLED,
- },
- {
- .id = V4L2_CID_BLUE_BALANCE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "blue balance",
- .minimum = 0x00,
- .maximum = 0x0f,
- .step = 0x01,
- .default_value = 0x05,
- .flags = V4L2_CTRL_FLAG_DISABLED,
- },
- {
- .id = ZC0301_V4L2_CID_GREEN_BALANCE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "green balance",
- .minimum = 0x00,
- .maximum = 0x0f,
- .step = 0x01,
- .default_value = 0x00,
- .flags = V4L2_CTRL_FLAG_DISABLED,
- },
- },
- .get_ctrl = &pas202bcb_get_ctrl,
- .set_ctrl = &pas202bcb_set_ctrl,
- .cropcap = {
- .bounds = {
- .left = 0,
- .top = 0,
- .width = 640,
- .height = 480,
- },
- .defrect = {
- .left = 0,
- .top = 0,
- .width = 640,
- .height = 480,
- },
- },
- .pix_format = {
- .width = 640,
- .height = 480,
- .pixelformat = V4L2_PIX_FMT_JPEG,
- .priv = 8,
- .colorspace = V4L2_COLORSPACE_JPEG,
- },
-};
-
-
-int zc0301_probe_pas202bcb(struct zc0301_device* cam)
-{
- int r0 = 0, r1 = 0, err = 0;
- unsigned int pid = 0;
-
- err += zc0301_write_reg(cam, 0x0000, 0x01);
- err += zc0301_write_reg(cam, 0x0010, 0x0e);
- err += zc0301_write_reg(cam, 0x0001, 0x01);
- err += zc0301_write_reg(cam, 0x0012, 0x03);
- err += zc0301_write_reg(cam, 0x0012, 0x01);
- err += zc0301_write_reg(cam, 0x008d, 0x08);
-
- msleep(10);
-
- r0 = zc0301_i2c_read(cam, 0x00, 1);
- r1 = zc0301_i2c_read(cam, 0x01, 1);
-
- if (r0 < 0 || r1 < 0 || err)
- return -EIO;
-
- pid = (r0 << 4) | ((r1 & 0xf0) >> 4);
- if (pid != 0x017)
- return -ENODEV;
-
- zc0301_attach_sensor(cam, &pas202bcb);
-
- return 0;
-}
diff --git a/drivers/media/video/zc0301/zc0301_pb0330.c b/drivers/media/video/zc0301/zc0301_pb0330.c
deleted file mode 100644
index 9519aba..0000000
--- a/drivers/media/video/zc0301/zc0301_pb0330.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/***************************************************************************
- * Plug-in for PB-0330 image sensor connected to the ZC0301P Image *
- * Processor and Control Chip *
- * *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> *
- * *
- * Initialization values of the ZC0301[P] have been taken from the SPCA5XX *
- * driver maintained by Michel Xhaard <mxhaard@magic.fr> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the Free Software *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
- ***************************************************************************/
-
-#include <linux/delay.h>
-#include "zc0301_sensor.h"
-
-
-static struct zc0301_sensor pb0330;
-
-
-static int pb0330_init(struct zc0301_device* cam)
-{
- int err = 0;
-
- err += zc0301_write_reg(cam, 0x0000, 0x01);
- err += zc0301_write_reg(cam, 0x0008, 0x03);
- err += zc0301_write_reg(cam, 0x0010, 0x0A);
- err += zc0301_write_reg(cam, 0x0002, 0x00);
- err += zc0301_write_reg(cam, 0x0003, 0x02);
- err += zc0301_write_reg(cam, 0x0004, 0x80);
- err += zc0301_write_reg(cam, 0x0005, 0x01);
- err += zc0301_write_reg(cam, 0x0006, 0xE0);
- err += zc0301_write_reg(cam, 0x0001, 0x01);
- err += zc0301_write_reg(cam, 0x0012, 0x05);
- err += zc0301_write_reg(cam, 0x0012, 0x07);
- err += zc0301_write_reg(cam, 0x0098, 0x00);
- err += zc0301_write_reg(cam, 0x009A, 0x00);
- err += zc0301_write_reg(cam, 0x011A, 0x00);
- err += zc0301_write_reg(cam, 0x011C, 0x00);
- err += zc0301_write_reg(cam, 0x0012, 0x05);
-
- err += zc0301_i2c_write(cam, 0x01, 0x0006);
- err += zc0301_i2c_write(cam, 0x02, 0x0011);
- err += zc0301_i2c_write(cam, 0x03, 0x01E7);
- err += zc0301_i2c_write(cam, 0x04, 0x0287);
- err += zc0301_i2c_write(cam, 0x06, 0x0003);
- err += zc0301_i2c_write(cam, 0x07, 0x3002);
- err += zc0301_i2c_write(cam, 0x20, 0x1100);
- err += zc0301_i2c_write(cam, 0x2F, 0xF7B0);
- err += zc0301_i2c_write(cam, 0x30, 0x0005);
- err += zc0301_i2c_write(cam, 0x31, 0x0000);
- err += zc0301_i2c_write(cam, 0x34, 0x0100);
- err += zc0301_i2c_write(cam, 0x35, 0x0060);
- err += zc0301_i2c_write(cam, 0x3D, 0x068F);
- err += zc0301_i2c_write(cam, 0x40, 0x01E0);
- err += zc0301_i2c_write(cam, 0x58, 0x0078);
- err += zc0301_i2c_write(cam, 0x62, 0x0411);
-
- err += zc0301_write_reg(cam, 0x0087, 0x10);
- err += zc0301_write_reg(cam, 0x0101, 0x37);
- err += zc0301_write_reg(cam, 0x0012, 0x05);
- err += zc0301_write_reg(cam, 0x0100, 0x0D);
- err += zc0301_write_reg(cam, 0x0189, 0x06);
- err += zc0301_write_reg(cam, 0x01AD, 0x00);
- err += zc0301_write_reg(cam, 0x01C5, 0x03);
- err += zc0301_write_reg(cam, 0x01CB, 0x13);
- err += zc0301_write_reg(cam, 0x0250, 0x08);
- err += zc0301_write_reg(cam, 0x0301, 0x08);
- err += zc0301_write_reg(cam, 0x01A8, 0x60);
- err += zc0301_write_reg(cam, 0x018D, 0x6C);
- err += zc0301_write_reg(cam, 0x01AD, 0x09);
- err += zc0301_write_reg(cam, 0x01AE, 0x15);
- err += zc0301_write_reg(cam, 0x010A, 0x50);
- err += zc0301_write_reg(cam, 0x010B, 0xF8);
- err += zc0301_write_reg(cam, 0x010C, 0xF8);
- err += zc0301_write_reg(cam, 0x010D, 0xF8);
- err += zc0301_write_reg(cam, 0x010E, 0x50);
- err += zc0301_write_reg(cam, 0x010F, 0xF8);
- err += zc0301_write_reg(cam, 0x0110, 0xF8);
- err += zc0301_write_reg(cam, 0x0111, 0xF8);
- err += zc0301_write_reg(cam, 0x0112, 0x50);
- err += zc0301_write_reg(cam, 0x0008, 0x03);
- err += zc0301_write_reg(cam, 0x01C6, 0x08);
- err += zc0301_write_reg(cam, 0x01CB, 0x0F);
- err += zc0301_write_reg(cam, 0x010A, 0x50);
- err += zc0301_write_reg(cam, 0x010B, 0xF8);
- err += zc0301_write_reg(cam, 0x010C, 0xF8);
- err += zc0301_write_reg(cam, 0x010D, 0xF8);
- err += zc0301_write_reg(cam, 0x010E, 0x50);
- err += zc0301_write_reg(cam, 0x010F, 0xF8);
- err += zc0301_write_reg(cam, 0x0110, 0xF8);
- err += zc0301_write_reg(cam, 0x0111, 0xF8);
- err += zc0301_write_reg(cam, 0x0112, 0x50);
- err += zc0301_write_reg(cam, 0x0180, 0x00);
- err += zc0301_write_reg(cam, 0x0019, 0x00);
-
- err += zc0301_i2c_write(cam, 0x05, 0x0066);
- err += zc0301_i2c_write(cam, 0x09, 0x02B2);
- err += zc0301_i2c_write(cam, 0x10, 0x0002);
-
- err += zc0301_write_reg(cam, 0x011D, 0x60);
- err += zc0301_write_reg(cam, 0x0190, 0x00);
- err += zc0301_write_reg(cam, 0x0191, 0x07);
- err += zc0301_write_reg(cam, 0x0192, 0x8C);
- err += zc0301_write_reg(cam, 0x0195, 0x00);
- err += zc0301_write_reg(cam, 0x0196, 0x00);
- err += zc0301_write_reg(cam, 0x0197, 0x8A);
- err += zc0301_write_reg(cam, 0x018C, 0x10);
- err += zc0301_write_reg(cam, 0x018F, 0x20);
- err += zc0301_write_reg(cam, 0x01A9, 0x14);
- err += zc0301_write_reg(cam, 0x01AA, 0x24);
- err += zc0301_write_reg(cam, 0x001D, 0xD7);
- err += zc0301_write_reg(cam, 0x001E, 0xF0);
- err += zc0301_write_reg(cam, 0x001F, 0xF8);
- err += zc0301_write_reg(cam, 0x0020, 0xFF);
- err += zc0301_write_reg(cam, 0x01AD, 0x09);
- err += zc0301_write_reg(cam, 0x01AE, 0x15);
- err += zc0301_write_reg(cam, 0x0180, 0x40);
- err += zc0301_write_reg(cam, 0x0180, 0x42);
-
- msleep(100);
-
- return err;
-}
-
-
-static struct zc0301_sensor pb0330 = {
- .name = "PB-0330",
- .init = &pb0330_init,
- .cropcap = {
- .bounds = {
- .left = 0,
- .top = 0,
- .width = 640,
- .height = 480,
- },
- .defrect = {
- .left = 0,
- .top = 0,
- .width = 640,
- .height = 480,
- },
- },
- .pix_format = {
- .width = 640,
- .height = 480,
- .pixelformat = V4L2_PIX_FMT_JPEG,
- .priv = 8,
- .colorspace = V4L2_COLORSPACE_JPEG,
- },
-};
-
-
-int zc0301_probe_pb0330(struct zc0301_device* cam)
-{
- int r0, err = 0;
-
- err += zc0301_write_reg(cam, 0x0000, 0x01);
- err += zc0301_write_reg(cam, 0x0010, 0x0a);
- err += zc0301_write_reg(cam, 0x0001, 0x01);
- err += zc0301_write_reg(cam, 0x0012, 0x03);
- err += zc0301_write_reg(cam, 0x0012, 0x01);
-
- msleep(10);
-
- r0 = zc0301_i2c_read(cam, 0x00, 2);
-
- if (r0 < 0 || err)
- return -EIO;
-
- if (r0 != 0x8243)
- return -ENODEV;
-
- zc0301_attach_sensor(cam, &pb0330);
-
- return 0;
-}
diff --git a/drivers/media/video/zc0301/zc0301_sensor.h b/drivers/media/video/zc0301/zc0301_sensor.h
deleted file mode 100644
index 0be783c..0000000
--- a/drivers/media/video/zc0301/zc0301_sensor.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/***************************************************************************
- * API for image sensors connected to the ZC0301[P] Image Processor and *
- * Control Chip *
- * *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the Free Software *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
- ***************************************************************************/
-
-#ifndef _ZC0301_SENSOR_H_
-#define _ZC0301_SENSOR_H_
-
-#include <linux/usb.h>
-#include <linux/videodev2.h>
-#include <linux/device.h>
-#include <linux/stddef.h>
-#include <linux/errno.h>
-#include <asm/types.h>
-
-struct zc0301_device;
-struct zc0301_sensor;
-
-/*****************************************************************************/
-
-extern int zc0301_probe_pas202bcb(struct zc0301_device* cam);
-extern int zc0301_probe_pb0330(struct zc0301_device* cam);
-
-#define ZC0301_SENSOR_TABLE \
-/* Weak detections must go at the end of the list */ \
-static int (*zc0301_sensor_table[])(struct zc0301_device*) = { \
- &zc0301_probe_pas202bcb, \
- &zc0301_probe_pb0330, \
- NULL, \
-};
-
-extern struct zc0301_device*
-zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id);
-
-extern void
-zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor);
-
-#define ZC0301_USB_DEVICE(vend, prod, intclass) \
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
- USB_DEVICE_ID_MATCH_INT_CLASS, \
- .idVendor = (vend), \
- .idProduct = (prod), \
- .bInterfaceClass = (intclass)
-
-#if !defined CONFIG_USB_GSPCA_ZC3XX && !defined CONFIG_USB_GSPCA_ZC3XX_MODULE
-#define ZC0301_ID_TABLE \
-static const struct usb_device_id zc0301_id_table[] = { \
- { ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */ \
- { ZC0301_USB_DEVICE(0x0ac8, 0x303b, 0xff), }, /* PB-0330 */ \
- { } \
-};
-#else
-#define ZC0301_ID_TABLE \
-static const struct usb_device_id zc0301_id_table[] = { \
- { ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */ \
- { } \
-};
-#endif
-
-/*****************************************************************************/
-
-extern int zc0301_write_reg(struct zc0301_device*, u16 index, u16 value);
-extern int zc0301_read_reg(struct zc0301_device*, u16 index);
-extern int zc0301_i2c_write(struct zc0301_device*, u16 address, u16 value);
-extern int zc0301_i2c_read(struct zc0301_device*, u16 address, u8 length);
-
-/*****************************************************************************/
-
-#define ZC0301_MAX_CTRLS (V4L2_CID_LASTP1 - V4L2_CID_BASE + 10)
-#define ZC0301_V4L2_CID_DAC_MAGNITUDE (V4L2_CID_PRIVATE_BASE + 0)
-#define ZC0301_V4L2_CID_GREEN_BALANCE (V4L2_CID_PRIVATE_BASE + 1)
-
-struct zc0301_sensor {
- char name[32];
-
- struct v4l2_queryctrl qctrl[ZC0301_MAX_CTRLS];
- struct v4l2_cropcap cropcap;
- struct v4l2_pix_format pix_format;
-
- int (*init)(struct zc0301_device*);
- int (*get_ctrl)(struct zc0301_device*, struct v4l2_control* ctrl);
- int (*set_ctrl)(struct zc0301_device*,
- const struct v4l2_control* ctrl);
- int (*set_crop)(struct zc0301_device*, const struct v4l2_rect* rect);
-
- /* Private */
- struct v4l2_queryctrl _qctrl[ZC0301_MAX_CTRLS];
- struct v4l2_rect _rect;
-};
-
-#endif /* _ZC0301_SENSOR_H_ */
--
1.6.5.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH 6/6] Remove obsolete zc0301 v4l driver
2010-05-28 17:03 ` [PATCH 6/6] Remove obsolete zc0301 v4l driver Amerigo Wang
@ 2010-05-28 17:30 ` Jean-Francois Moine
2010-05-31 6:16 ` Cong Wang
0 siblings, 1 reply; 9+ messages in thread
From: Jean-Francois Moine @ 2010-05-28 17:30 UTC (permalink / raw)
To: Amerigo Wang; +Cc: linux-media
On Fri, 28 May 2010 13:03:28 -0400
Amerigo Wang <amwang@redhat.com> wrote:
> Subject: [PATCH 6/6] Remove obsolete zc0301 v4l driver
>
> Duplicate functionality with the gspca_zc3xx driver, zc0301 only
> supports 2 USB-ID's (because it only supports a limited set of
> sensors) wich are also supported by the gspca_zc3xx driver
> (which supports 53 USB-ID's in total).
You forgot to remove the conditionnal compilation in the gspca_zc3xx
driver (USB_DEVICE(0x046d, 0x08ae) in gspca/zc3xx.c)
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 6/6] Remove obsolete zc0301 v4l driver
2010-05-28 17:30 ` Jean-Francois Moine
@ 2010-05-31 6:16 ` Cong Wang
0 siblings, 0 replies; 9+ messages in thread
From: Cong Wang @ 2010-05-31 6:16 UTC (permalink / raw)
To: Jean-Francois Moine; +Cc: linux-media
[-- Attachment #1: Type: text/plain, Size: 666 bytes --]
On 05/29/10 01:30, Jean-Francois Moine wrote:
> On Fri, 28 May 2010 13:03:28 -0400
> Amerigo Wang<amwang@redhat.com> wrote:
>
>> Subject: [PATCH 6/6] Remove obsolete zc0301 v4l driver
>>
>> Duplicate functionality with the gspca_zc3xx driver, zc0301 only
>> supports 2 USB-ID's (because it only supports a limited set of
>> sensors) wich are also supported by the gspca_zc3xx driver
>> (which supports 53 USB-ID's in total).
>
> You forgot to remove the conditionnal compilation in the gspca_zc3xx
> driver (USB_DEVICE(0x046d, 0x08ae) in gspca/zc3xx.c)
>
Right, thanks for pointing this out!
Attached is the updated patch, please use this one instead.
Thanks!
[-- Attachment #2: 0006-Remove-obsolete-zc0301-v4l-driver.patch --]
[-- Type: text/x-patch, Size: 89107 bytes --]
From: Amerigo Wang <amwang@redhat.com>
Subject: [PATCH v2 6/6] Remove obsolete zc0301 v4l driver
Duplicate functionality with the gspca_zc3xx driver, zc0301 only
supports 2 USB-ID's (because it only supports a limited set of
sensors) wich are also supported by the gspca_zc3xx driver
(which supports 53 USB-ID's in total).
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Amerigo Wang <amwang@redhat.com>
---
Documentation/feature-removal-schedule.txt | 11 -
drivers/media/video/Kconfig | 2 -
drivers/media/video/Makefile | 1 -
drivers/media/video/gspca/zc3xx.c | 2 -
drivers/media/video/zc0301/Kconfig | 15 -
drivers/media/video/zc0301/Makefile | 3 -
drivers/media/video/zc0301/zc0301.h | 196 ---
drivers/media/video/zc0301/zc0301_core.c | 2098 -------------------------
drivers/media/video/zc0301/zc0301_pas202bcb.c | 362 -----
drivers/media/video/zc0301/zc0301_pb0330.c | 188 ---
drivers/media/video/zc0301/zc0301_sensor.h | 107 --
11 files changed, 0 insertions(+), 2985 deletions(-)
delete mode 100644 drivers/media/video/zc0301/Kconfig
delete mode 100644 drivers/media/video/zc0301/Makefile
delete mode 100644 drivers/media/video/zc0301/zc0301.h
delete mode 100644 drivers/media/video/zc0301/zc0301_core.c
delete mode 100644 drivers/media/video/zc0301/zc0301_pas202bcb.c
delete mode 100644 drivers/media/video/zc0301/zc0301_pb0330.c
delete mode 100644 drivers/media/video/zc0301/zc0301_sensor.h
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 5a29615..a1b33b1 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -459,17 +459,6 @@ Who: Corentin Chary <corentin.chary@gmail.com>
----------------------------
-What: zc0301 v4l driver
-When: 2.6.35
-Files: drivers/media/video/zc0301/*
-Why: Duplicate functionality with the gspca_zc3xx driver, zc0301 only
- supports 2 USB-ID's (because it only supports a limited set of
- sensors) wich are also supported by the gspca_zc3xx driver
- (which supports 53 USB-ID's in total)
-Who: Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
What: sysfs-class-rfkill state file
When: Feb 2014
Files: net/rfkill/core.c
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 4361fe6..01f3696 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -1013,8 +1013,6 @@ config USB_SE401
source "drivers/media/video/sn9c102/Kconfig"
-source "drivers/media/video/zc0301/Kconfig"
-
source "drivers/media/video/pwc/Kconfig"
config USB_ZR364XX
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 5c2a38e..2beb4e4 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -133,7 +133,6 @@ obj-$(CONFIG_USB_STKWEBCAM) += stkwebcam.o
obj-$(CONFIG_USB_SN9C102) += sn9c102/
obj-$(CONFIG_USB_ET61X251) += et61x251/
obj-$(CONFIG_USB_PWC) += pwc/
-obj-$(CONFIG_USB_ZC0301) += zc0301/
obj-$(CONFIG_USB_GSPCA) += gspca/
obj-$(CONFIG_VIDEO_HDPVR) += hdpvr/
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index d02aa5c..1ee4741 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -7163,9 +7163,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
{USB_DEVICE(0x046d, 0x08aa)},
{USB_DEVICE(0x046d, 0x08ac)},
{USB_DEVICE(0x046d, 0x08ad)},
-#if !defined CONFIG_USB_ZC0301 && !defined CONFIG_USB_ZC0301_MODULE
{USB_DEVICE(0x046d, 0x08ae)},
-#endif
{USB_DEVICE(0x046d, 0x08af)},
{USB_DEVICE(0x046d, 0x08b9)},
{USB_DEVICE(0x046d, 0x08d7)},
diff --git a/drivers/media/video/zc0301/Kconfig b/drivers/media/video/zc0301/Kconfig
deleted file mode 100644
index a7e610e..0000000
--- a/drivers/media/video/zc0301/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-config USB_ZC0301
- tristate "USB ZC0301[P] webcam support (DEPRECATED)"
- depends on VIDEO_V4L2
- default n
- ---help---
- This driver is DEPRECATED please use the gspca zc3xx module
- instead.
-
- Say Y here if you want support for cameras based on the ZC0301 or
- ZC0301P Image Processors and Control Chips.
-
- See <file:Documentation/video4linux/zc0301.txt> for more info.
-
- To compile this driver as a module, choose M here: the
- module will be called zc0301.
diff --git a/drivers/media/video/zc0301/Makefile b/drivers/media/video/zc0301/Makefile
deleted file mode 100644
index d9e6d97..0000000
--- a/drivers/media/video/zc0301/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-zc0301-objs := zc0301_core.o zc0301_pb0330.o zc0301_pas202bcb.o
-
-obj-$(CONFIG_USB_ZC0301) += zc0301.o
diff --git a/drivers/media/video/zc0301/zc0301.h b/drivers/media/video/zc0301/zc0301.h
deleted file mode 100644
index b1b5cce..0000000
--- a/drivers/media/video/zc0301/zc0301.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/***************************************************************************
- * V4L2 driver for ZC0301[P] Image Processor and Control Chip *
- * *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the Free Software *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
- ***************************************************************************/
-
-#ifndef _ZC0301_H_
-#define _ZC0301_H_
-
-#include <linux/version.h>
-#include <linux/usb.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/time.h>
-#include <linux/wait.h>
-#include <linux/types.h>
-#include <linux/param.h>
-#include <linux/mutex.h>
-#include <linux/rwsem.h>
-#include <linux/stddef.h>
-#include <linux/string.h>
-#include <linux/kref.h>
-
-#include "zc0301_sensor.h"
-
-/*****************************************************************************/
-
-#define ZC0301_DEBUG
-#define ZC0301_DEBUG_LEVEL 2
-#define ZC0301_MAX_DEVICES 64
-#define ZC0301_FORCE_MUNMAP 0
-#define ZC0301_MAX_FRAMES 32
-#define ZC0301_COMPRESSION_QUALITY 0
-#define ZC0301_URBS 2
-#define ZC0301_ISO_PACKETS 7
-#define ZC0301_ALTERNATE_SETTING 7
-#define ZC0301_URB_TIMEOUT msecs_to_jiffies(2 * ZC0301_ISO_PACKETS)
-#define ZC0301_CTRL_TIMEOUT 100
-#define ZC0301_FRAME_TIMEOUT 2
-
-/*****************************************************************************/
-
-ZC0301_ID_TABLE
-ZC0301_SENSOR_TABLE
-
-enum zc0301_frame_state {
- F_UNUSED,
- F_QUEUED,
- F_GRABBING,
- F_DONE,
- F_ERROR,
-};
-
-struct zc0301_frame_t {
- void* bufmem;
- struct v4l2_buffer buf;
- enum zc0301_frame_state state;
- struct list_head frame;
- unsigned long vma_use_count;
-};
-
-enum zc0301_dev_state {
- DEV_INITIALIZED = 0x01,
- DEV_DISCONNECTED = 0x02,
- DEV_MISCONFIGURED = 0x04,
-};
-
-enum zc0301_io_method {
- IO_NONE,
- IO_READ,
- IO_MMAP,
-};
-
-enum zc0301_stream_state {
- STREAM_OFF,
- STREAM_INTERRUPT,
- STREAM_ON,
-};
-
-struct zc0301_module_param {
- u8 force_munmap;
- u16 frame_timeout;
-};
-
-static DECLARE_RWSEM(zc0301_dev_lock);
-
-struct zc0301_device {
- struct video_device* v4ldev;
-
- struct zc0301_sensor sensor;
-
- struct usb_device* usbdev;
- struct urb* urb[ZC0301_URBS];
- void* transfer_buffer[ZC0301_URBS];
- u8* control_buffer;
-
- struct zc0301_frame_t *frame_current, frame[ZC0301_MAX_FRAMES];
- struct list_head inqueue, outqueue;
- u32 frame_count, nbuffers, nreadbuffers;
-
- enum zc0301_io_method io;
- enum zc0301_stream_state stream;
-
- struct v4l2_jpegcompression compression;
-
- struct zc0301_module_param module_param;
-
- struct kref kref;
- enum zc0301_dev_state state;
- u8 users;
-
- struct completion probe;
- struct mutex open_mutex, fileop_mutex;
- spinlock_t queue_lock;
- wait_queue_head_t wait_open, wait_frame, wait_stream;
-};
-
-/*****************************************************************************/
-
-struct zc0301_device*
-zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id)
-{
- return usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id) ? cam : NULL;
-}
-
-void
-zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor)
-{
- memcpy(&cam->sensor, sensor, sizeof(struct zc0301_sensor));
-}
-
-/*****************************************************************************/
-
-#undef DBG
-#undef KDBG
-#ifdef ZC0301_DEBUG
-# define DBG(level, fmt, args...) \
-do { \
- if (debug >= (level)) { \
- if ((level) == 1) \
- dev_err(&cam->usbdev->dev, fmt "\n", ## args); \
- else if ((level) == 2) \
- dev_info(&cam->usbdev->dev, fmt "\n", ## args); \
- else if ((level) >= 3) \
- dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", \
- __FILE__, __func__, __LINE__ , ## args); \
- } \
-} while (0)
-# define KDBG(level, fmt, args...) \
-do { \
- if (debug >= (level)) { \
- if ((level) == 1 || (level) == 2) \
- pr_info("zc0301: " fmt "\n", ## args); \
- else if ((level) == 3) \
- pr_debug("sn9c102: [%s:%s:%d] " fmt "\n", __FILE__, \
- __func__, __LINE__ , ## args); \
- } \
-} while (0)
-# define V4LDBG(level, name, cmd) \
-do { \
- if (debug >= (level)) \
- v4l_print_ioctl(name, cmd); \
-} while (0)
-#else
-# define DBG(level, fmt, args...) do {;} while(0)
-# define KDBG(level, fmt, args...) do {;} while(0)
-# define V4LDBG(level, name, cmd) do {;} while(0)
-#endif
-
-#undef PDBG
-#define PDBG(fmt, args...) \
-dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", __FILE__, __func__, \
- __LINE__ , ## args)
-
-#undef PDBGG
-#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
-
-#endif /* _ZC0301_H_ */
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
deleted file mode 100644
index bb51cfb..0000000
--- a/drivers/media/video/zc0301/zc0301_core.c
+++ /dev/null
@@ -1,2098 +0,0 @@
-/***************************************************************************
- * Video4Linux2 driver for ZC0301[P] Image Processor and Control Chip *
- * *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> *
- * *
- * Informations about the chip internals needed to enable the I2C protocol *
- * have been taken from the documentation of the ZC030x Video4Linux1 *
- * driver written by Andrew Birkett <andy@nobugs.org> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the Free Software *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
- ***************************************************************************/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <linux/poll.h>
-#include <linux/stat.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/page-flags.h>
-#include <asm/byteorder.h>
-#include <asm/page.h>
-#include <asm/uaccess.h>
-
-#include "zc0301.h"
-
-/*****************************************************************************/
-
-#define ZC0301_MODULE_NAME "V4L2 driver for ZC0301[P] " \
- "Image Processor and Control Chip"
-#define ZC0301_MODULE_AUTHOR "(C) 2006-2007 Luca Risolia"
-#define ZC0301_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
-#define ZC0301_MODULE_LICENSE "GPL"
-#define ZC0301_MODULE_VERSION "1:1.10"
-#define ZC0301_MODULE_VERSION_CODE KERNEL_VERSION(1, 1, 10)
-
-/*****************************************************************************/
-
-MODULE_DEVICE_TABLE(usb, zc0301_id_table);
-
-MODULE_AUTHOR(ZC0301_MODULE_AUTHOR " " ZC0301_AUTHOR_EMAIL);
-MODULE_DESCRIPTION(ZC0301_MODULE_NAME);
-MODULE_VERSION(ZC0301_MODULE_VERSION);
-MODULE_LICENSE(ZC0301_MODULE_LICENSE);
-
-static short video_nr[] = {[0 ... ZC0301_MAX_DEVICES-1] = -1};
-module_param_array(video_nr, short, NULL, 0444);
-MODULE_PARM_DESC(video_nr,
- "\n<-1|n[,...]> Specify V4L2 minor mode number."
- "\n -1 = use next available (default)"
- "\n n = use minor number n (integer >= 0)"
- "\nYou can specify up to "
- __MODULE_STRING(ZC0301_MAX_DEVICES) " cameras this way."
- "\nFor example:"
- "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
- "\nthe second registered camera and use auto for the first"
- "\none and for every other camera."
- "\n");
-
-static short force_munmap[] = {[0 ... ZC0301_MAX_DEVICES-1] =
- ZC0301_FORCE_MUNMAP};
-module_param_array(force_munmap, bool, NULL, 0444);
-MODULE_PARM_DESC(force_munmap,
- "\n<0|1[,...]> Force the application to unmap previously"
- "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
- "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
- "\nthis feature. This parameter is specific for each"
- "\ndetected camera."
- "\n 0 = do not force memory unmapping"
- "\n 1 = force memory unmapping (save memory)"
- "\nDefault value is "__MODULE_STRING(ZC0301_FORCE_MUNMAP)"."
- "\n");
-
-static unsigned int frame_timeout[] = {[0 ... ZC0301_MAX_DEVICES-1] =
- ZC0301_FRAME_TIMEOUT};
-module_param_array(frame_timeout, uint, NULL, 0644);
-MODULE_PARM_DESC(frame_timeout,
- "\n<n[,...]> Timeout for a video frame in seconds."
- "\nThis parameter is specific for each detected camera."
- "\nDefault value is "__MODULE_STRING(ZC0301_FRAME_TIMEOUT)"."
- "\n");
-
-#ifdef ZC0301_DEBUG
-static unsigned short debug = ZC0301_DEBUG_LEVEL;
-module_param(debug, ushort, 0644);
-MODULE_PARM_DESC(debug,
- "\n<n> Debugging information level, from 0 to 3:"
- "\n0 = none (use carefully)"
- "\n1 = critical errors"
- "\n2 = significant informations"
- "\n3 = more verbose messages"
- "\nLevel 3 is useful for testing only, when only "
- "one device is used."
- "\nDefault value is "__MODULE_STRING(ZC0301_DEBUG_LEVEL)"."
- "\n");
-#endif
-
-/*****************************************************************************/
-
-static u32
-zc0301_request_buffers(struct zc0301_device* cam, u32 count,
- enum zc0301_io_method io)
-{
- struct v4l2_pix_format* p = &(cam->sensor.pix_format);
- struct v4l2_rect* r = &(cam->sensor.cropcap.bounds);
- const size_t imagesize = cam->module_param.force_munmap ||
- io == IO_READ ?
- (p->width * p->height * p->priv) / 8 :
- (r->width * r->height * p->priv) / 8;
- void* buff = NULL;
- u32 i;
-
- if (count > ZC0301_MAX_FRAMES)
- count = ZC0301_MAX_FRAMES;
-
- cam->nbuffers = count;
- while (cam->nbuffers > 0) {
- if ((buff = vmalloc_32_user(cam->nbuffers *
- PAGE_ALIGN(imagesize))))
- break;
- cam->nbuffers--;
- }
-
- for (i = 0; i < cam->nbuffers; i++) {
- cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize);
- cam->frame[i].buf.index = i;
- cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize);
- cam->frame[i].buf.length = imagesize;
- cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- cam->frame[i].buf.sequence = 0;
- cam->frame[i].buf.field = V4L2_FIELD_NONE;
- cam->frame[i].buf.memory = V4L2_MEMORY_MMAP;
- cam->frame[i].buf.flags = 0;
- }
-
- return cam->nbuffers;
-}
-
-
-static void zc0301_release_buffers(struct zc0301_device* cam)
-{
- if (cam->nbuffers) {
- vfree(cam->frame[0].bufmem);
- cam->nbuffers = 0;
- }
- cam->frame_current = NULL;
-}
-
-
-static void zc0301_empty_framequeues(struct zc0301_device* cam)
-{
- u32 i;
-
- INIT_LIST_HEAD(&cam->inqueue);
- INIT_LIST_HEAD(&cam->outqueue);
-
- for (i = 0; i < ZC0301_MAX_FRAMES; i++) {
- cam->frame[i].state = F_UNUSED;
- cam->frame[i].buf.bytesused = 0;
- }
-}
-
-
-static void zc0301_requeue_outqueue(struct zc0301_device* cam)
-{
- struct zc0301_frame_t *i;
-
- list_for_each_entry(i, &cam->outqueue, frame) {
- i->state = F_QUEUED;
- list_add(&i->frame, &cam->inqueue);
- }
-
- INIT_LIST_HEAD(&cam->outqueue);
-}
-
-
-static void zc0301_queue_unusedframes(struct zc0301_device* cam)
-{
- unsigned long lock_flags;
- u32 i;
-
- for (i = 0; i < cam->nbuffers; i++)
- if (cam->frame[i].state == F_UNUSED) {
- cam->frame[i].state = F_QUEUED;
- spin_lock_irqsave(&cam->queue_lock, lock_flags);
- list_add_tail(&cam->frame[i].frame, &cam->inqueue);
- spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
- }
-}
-
-/*****************************************************************************/
-
-int zc0301_write_reg(struct zc0301_device* cam, u16 index, u16 value)
-{
- struct usb_device* udev = cam->usbdev;
- int res;
-
- res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0xa0, 0x40,
- value, index, NULL, 0, ZC0301_CTRL_TIMEOUT);
- if (res < 0) {
- DBG(3, "Failed to write a register (index 0x%04X, "
- "value 0x%02X, error %d)",index, value, res);
- return -1;
- }
-
- return 0;
-}
-
-
-int zc0301_read_reg(struct zc0301_device* cam, u16 index)
-{
- struct usb_device* udev = cam->usbdev;
- u8* buff = cam->control_buffer;
- int res;
-
- res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0xa1, 0xc0,
- 0x0001, index, buff, 1, ZC0301_CTRL_TIMEOUT);
- if (res < 0)
- DBG(3, "Failed to read a register (index 0x%04X, error %d)",
- index, res);
-
- PDBGG("Read: index 0x%04X, value: 0x%04X", index, (int)(*buff));
-
- return (res >= 0) ? (int)(*buff) : -1;
-}
-
-
-int zc0301_i2c_read(struct zc0301_device* cam, u16 address, u8 length)
-{
- int err = 0, res, r0, r1;
-
- err += zc0301_write_reg(cam, 0x0092, address);
- err += zc0301_write_reg(cam, 0x0090, 0x02);
-
- msleep(1);
-
- res = zc0301_read_reg(cam, 0x0091);
- if (res < 0)
- err += res;
- r0 = zc0301_read_reg(cam, 0x0095);
- if (r0 < 0)
- err += r0;
- r1 = zc0301_read_reg(cam, 0x0096);
- if (r1 < 0)
- err += r1;
-
- res = (length <= 1) ? r0 : r0 | (r1 << 8);
-
- if (err)
- DBG(3, "I2C read failed at address 0x%04X, value: 0x%04X",
- address, res);
-
-
- PDBGG("I2C read: address 0x%04X, value: 0x%04X", address, res);
-
- return err ? -1 : res;
-}
-
-
-int zc0301_i2c_write(struct zc0301_device* cam, u16 address, u16 value)
-{
- int err = 0, res;
-
- err += zc0301_write_reg(cam, 0x0092, address);
- err += zc0301_write_reg(cam, 0x0093, value & 0xff);
- err += zc0301_write_reg(cam, 0x0094, value >> 8);
- err += zc0301_write_reg(cam, 0x0090, 0x01);
-
- msleep(1);
-
- res = zc0301_read_reg(cam, 0x0091);
- if (res < 0)
- err += res;
-
- if (err)
- DBG(3, "I2C write failed at address 0x%04X, value: 0x%04X",
- address, value);
-
- PDBGG("I2C write: address 0x%04X, value: 0x%04X", address, value);
-
- return err ? -1 : 0;
-}
-
-/*****************************************************************************/
-
-static void zc0301_urb_complete(struct urb *urb)
-{
- struct zc0301_device* cam = urb->context;
- struct zc0301_frame_t** f;
- size_t imagesize;
- u8 i;
- int err = 0;
-
- if (urb->status == -ENOENT)
- return;
-
- f = &cam->frame_current;
-
- if (cam->stream == STREAM_INTERRUPT) {
- cam->stream = STREAM_OFF;
- if ((*f))
- (*f)->state = F_QUEUED;
- DBG(3, "Stream interrupted");
- wake_up(&cam->wait_stream);
- }
-
- if (cam->state & DEV_DISCONNECTED)
- return;
-
- if (cam->state & DEV_MISCONFIGURED) {
- wake_up_interruptible(&cam->wait_frame);
- return;
- }
-
- if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue))
- goto resubmit_urb;
-
- if (!(*f))
- (*f) = list_entry(cam->inqueue.next, struct zc0301_frame_t,
- frame);
-
- imagesize = (cam->sensor.pix_format.width *
- cam->sensor.pix_format.height *
- cam->sensor.pix_format.priv) / 8;
-
- for (i = 0; i < urb->number_of_packets; i++) {
- unsigned int len, status;
- void *pos;
- u16* soi;
- u8 sof;
-
- len = urb->iso_frame_desc[i].actual_length;
- status = urb->iso_frame_desc[i].status;
- pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
-
- if (status) {
- DBG(3, "Error in isochronous frame");
- (*f)->state = F_ERROR;
- continue;
- }
-
- sof = (*(soi = pos) == 0xd8ff);
-
- PDBGG("Isochrnous frame: length %u, #%u i,", len, i);
-
- if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR)
-start_of_frame:
- if (sof) {
- (*f)->state = F_GRABBING;
- (*f)->buf.bytesused = 0;
- do_gettimeofday(&(*f)->buf.timestamp);
- DBG(3, "SOF detected: new video frame");
- }
-
- if ((*f)->state == F_GRABBING) {
- if (sof && (*f)->buf.bytesused)
- goto end_of_frame;
-
- if ((*f)->buf.bytesused + len > imagesize) {
- DBG(3, "Video frame size exceeded");
- (*f)->state = F_ERROR;
- continue;
- }
-
- memcpy((*f)->bufmem+(*f)->buf.bytesused, pos, len);
- (*f)->buf.bytesused += len;
-
- if ((*f)->buf.bytesused == imagesize) {
- u32 b;
-end_of_frame:
- b = (*f)->buf.bytesused;
- (*f)->state = F_DONE;
- (*f)->buf.sequence= ++cam->frame_count;
- spin_lock(&cam->queue_lock);
- list_move_tail(&(*f)->frame, &cam->outqueue);
- if (!list_empty(&cam->inqueue))
- (*f) = list_entry(cam->inqueue.next,
- struct zc0301_frame_t,
- frame);
- else
- (*f) = NULL;
- spin_unlock(&cam->queue_lock);
- DBG(3, "Video frame captured: : %lu bytes",
- (unsigned long)(b));
-
- if (!(*f))
- goto resubmit_urb;
-
- if (sof)
- goto start_of_frame;
- }
- }
- }
-
-resubmit_urb:
- urb->dev = cam->usbdev;
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err < 0 && err != -EPERM) {
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "usb_submit_urb() failed");
- }
-
- wake_up_interruptible(&cam->wait_frame);
-}
-
-
-static int zc0301_start_transfer(struct zc0301_device* cam)
-{
- struct usb_device *udev = cam->usbdev;
- struct usb_host_interface* altsetting = usb_altnum_to_altsetting(
- usb_ifnum_to_if(udev, 0),
- ZC0301_ALTERNATE_SETTING);
- const unsigned int psz = le16_to_cpu(altsetting->
- endpoint[0].desc.wMaxPacketSize);
- struct urb* urb;
- s8 i, j;
- int err = 0;
-
- for (i = 0; i < ZC0301_URBS; i++) {
- cam->transfer_buffer[i] = kzalloc(ZC0301_ISO_PACKETS * psz,
- GFP_KERNEL);
- if (!cam->transfer_buffer[i]) {
- err = -ENOMEM;
- DBG(1, "Not enough memory");
- goto free_buffers;
- }
- }
-
- for (i = 0; i < ZC0301_URBS; i++) {
- urb = usb_alloc_urb(ZC0301_ISO_PACKETS, GFP_KERNEL);
- cam->urb[i] = urb;
- if (!urb) {
- err = -ENOMEM;
- DBG(1, "usb_alloc_urb() failed");
- goto free_urbs;
- }
- urb->dev = udev;
- urb->context = cam;
- urb->pipe = usb_rcvisocpipe(udev, 1);
- urb->transfer_flags = URB_ISO_ASAP;
- urb->number_of_packets = ZC0301_ISO_PACKETS;
- urb->complete = zc0301_urb_complete;
- urb->transfer_buffer = cam->transfer_buffer[i];
- urb->transfer_buffer_length = psz * ZC0301_ISO_PACKETS;
- urb->interval = 1;
- for (j = 0; j < ZC0301_ISO_PACKETS; j++) {
- urb->iso_frame_desc[j].offset = psz * j;
- urb->iso_frame_desc[j].length = psz;
- }
- }
-
- err = usb_set_interface(udev, 0, ZC0301_ALTERNATE_SETTING);
- if (err) {
- DBG(1, "usb_set_interface() failed");
- goto free_urbs;
- }
-
- cam->frame_current = NULL;
-
- for (i = 0; i < ZC0301_URBS; i++) {
- err = usb_submit_urb(cam->urb[i], GFP_KERNEL);
- if (err) {
- for (j = i-1; j >= 0; j--)
- usb_kill_urb(cam->urb[j]);
- DBG(1, "usb_submit_urb() failed, error %d", err);
- goto free_urbs;
- }
- }
-
- return 0;
-
-free_urbs:
- for (i = 0; (i < ZC0301_URBS) && cam->urb[i]; i++)
- usb_free_urb(cam->urb[i]);
-
-free_buffers:
- for (i = 0; (i < ZC0301_URBS) && cam->transfer_buffer[i]; i++)
- kfree(cam->transfer_buffer[i]);
-
- return err;
-}
-
-
-static int zc0301_stop_transfer(struct zc0301_device* cam)
-{
- struct usb_device *udev = cam->usbdev;
- s8 i;
- int err = 0;
-
- if (cam->state & DEV_DISCONNECTED)
- return 0;
-
- for (i = ZC0301_URBS-1; i >= 0; i--) {
- usb_kill_urb(cam->urb[i]);
- usb_free_urb(cam->urb[i]);
- kfree(cam->transfer_buffer[i]);
- }
-
- err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */
- if (err)
- DBG(3, "usb_set_interface() failed");
-
- return err;
-}
-
-
-static int zc0301_stream_interrupt(struct zc0301_device* cam)
-{
- long timeout;
-
- cam->stream = STREAM_INTERRUPT;
- timeout = wait_event_timeout(cam->wait_stream,
- (cam->stream == STREAM_OFF) ||
- (cam->state & DEV_DISCONNECTED),
- ZC0301_URB_TIMEOUT);
- if (cam->state & DEV_DISCONNECTED)
- return -ENODEV;
- else if (cam->stream != STREAM_OFF) {
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "URB timeout reached. The camera is misconfigured. To "
- "use it, close and open %s again.",
- video_device_node_name(cam->v4ldev));
- return -EIO;
- }
-
- return 0;
-}
-
-/*****************************************************************************/
-
-static int
-zc0301_set_compression(struct zc0301_device* cam,
- struct v4l2_jpegcompression* compression)
-{
- int r, err = 0;
-
- if ((r = zc0301_read_reg(cam, 0x0008)) < 0)
- err += r;
- err += zc0301_write_reg(cam, 0x0008, r | 0x11 | compression->quality);
-
- return err ? -EIO : 0;
-}
-
-
-static int zc0301_init(struct zc0301_device* cam)
-{
- struct zc0301_sensor* s = &cam->sensor;
- struct v4l2_control ctrl;
- struct v4l2_queryctrl *qctrl;
- struct v4l2_rect* rect;
- u8 i = 0;
- int err = 0;
-
- if (!(cam->state & DEV_INITIALIZED)) {
- mutex_init(&cam->open_mutex);
- init_waitqueue_head(&cam->wait_open);
- qctrl = s->qctrl;
- rect = &(s->cropcap.defrect);
- cam->compression.quality = ZC0301_COMPRESSION_QUALITY;
- } else { /* use current values */
- qctrl = s->_qctrl;
- rect = &(s->_rect);
- }
-
- if (s->init) {
- err = s->init(cam);
- if (err) {
- DBG(3, "Sensor initialization failed");
- return err;
- }
- }
-
- if ((err = zc0301_set_compression(cam, &cam->compression))) {
- DBG(3, "set_compression() failed");
- return err;
- }
-
- if (s->set_crop)
- if ((err = s->set_crop(cam, rect))) {
- DBG(3, "set_crop() failed");
- return err;
- }
-
- if (s->set_ctrl) {
- for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
- if (s->qctrl[i].id != 0 &&
- !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) {
- ctrl.id = s->qctrl[i].id;
- ctrl.value = qctrl[i].default_value;
- err = s->set_ctrl(cam, &ctrl);
- if (err) {
- DBG(3, "Set %s control failed",
- s->qctrl[i].name);
- return err;
- }
- DBG(3, "Image sensor supports '%s' control",
- s->qctrl[i].name);
- }
- }
-
- if (!(cam->state & DEV_INITIALIZED)) {
- mutex_init(&cam->fileop_mutex);
- spin_lock_init(&cam->queue_lock);
- init_waitqueue_head(&cam->wait_frame);
- init_waitqueue_head(&cam->wait_stream);
- cam->nreadbuffers = 2;
- memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl));
- memcpy(&(s->_rect), &(s->cropcap.defrect),
- sizeof(struct v4l2_rect));
- cam->state |= DEV_INITIALIZED;
- }
-
- DBG(2, "Initialization succeeded");
- return 0;
-}
-
-/*****************************************************************************/
-
-static void zc0301_release_resources(struct kref *kref)
-{
- struct zc0301_device *cam = container_of(kref, struct zc0301_device,
- kref);
- DBG(2, "V4L2 device %s deregistered",
- video_device_node_name(cam->v4ldev));
- video_set_drvdata(cam->v4ldev, NULL);
- video_unregister_device(cam->v4ldev);
- usb_put_dev(cam->usbdev);
- kfree(cam->control_buffer);
- kfree(cam);
-}
-
-
-static int zc0301_open(struct file *filp)
-{
- struct zc0301_device* cam;
- int err = 0;
-
- if (!down_read_trylock(&zc0301_dev_lock))
- return -EAGAIN;
-
- cam = video_drvdata(filp);
-
- if (wait_for_completion_interruptible(&cam->probe)) {
- up_read(&zc0301_dev_lock);
- return -ERESTARTSYS;
- }
-
- kref_get(&cam->kref);
-
- if (mutex_lock_interruptible(&cam->open_mutex)) {
- kref_put(&cam->kref, zc0301_release_resources);
- up_read(&zc0301_dev_lock);
- return -ERESTARTSYS;
- }
-
- if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present");
- err = -ENODEV;
- goto out;
- }
-
- if (cam->users) {
- DBG(2, "Device %s is busy...",
- video_device_node_name(cam->v4ldev));
- DBG(3, "Simultaneous opens are not supported");
- if ((filp->f_flags & O_NONBLOCK) ||
- (filp->f_flags & O_NDELAY)) {
- err = -EWOULDBLOCK;
- goto out;
- }
- DBG(2, "A blocking open() has been requested. Wait for the "
- "device to be released...");
- up_read(&zc0301_dev_lock);
- err = wait_event_interruptible_exclusive(cam->wait_open,
- (cam->state & DEV_DISCONNECTED)
- || !cam->users);
- down_read(&zc0301_dev_lock);
- if (err)
- goto out;
- if (cam->state & DEV_DISCONNECTED) {
- err = -ENODEV;
- goto out;
- }
- }
-
- if (cam->state & DEV_MISCONFIGURED) {
- err = zc0301_init(cam);
- if (err) {
- DBG(1, "Initialization failed again. "
- "I will retry on next open().");
- goto out;
- }
- cam->state &= ~DEV_MISCONFIGURED;
- }
-
- if ((err = zc0301_start_transfer(cam)))
- goto out;
-
- filp->private_data = cam;
- cam->users++;
- cam->io = IO_NONE;
- cam->stream = STREAM_OFF;
- cam->nbuffers = 0;
- cam->frame_count = 0;
- zc0301_empty_framequeues(cam);
-
- DBG(3, "Video device %s is open",
- video_device_node_name(cam->v4ldev));
-
-out:
- mutex_unlock(&cam->open_mutex);
- if (err)
- kref_put(&cam->kref, zc0301_release_resources);
- up_read(&zc0301_dev_lock);
- return err;
-}
-
-
-static int zc0301_release(struct file *filp)
-{
- struct zc0301_device* cam;
-
- down_write(&zc0301_dev_lock);
-
- cam = video_drvdata(filp);
-
- zc0301_stop_transfer(cam);
- zc0301_release_buffers(cam);
- cam->users--;
- wake_up_interruptible_nr(&cam->wait_open, 1);
-
- DBG(3, "Video device %s closed",
- video_device_node_name(cam->v4ldev));
-
- kref_put(&cam->kref, zc0301_release_resources);
-
- up_write(&zc0301_dev_lock);
-
- return 0;
-}
-
-
-static ssize_t
-zc0301_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
-{
- struct zc0301_device *cam = video_drvdata(filp);
- struct zc0301_frame_t* f, * i;
- unsigned long lock_flags;
- long timeout;
- int err = 0;
-
- if (mutex_lock_interruptible(&cam->fileop_mutex))
- return -ERESTARTSYS;
-
- if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present");
- mutex_unlock(&cam->fileop_mutex);
- return -ENODEV;
- }
-
- if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it "
- "again.");
- mutex_unlock(&cam->fileop_mutex);
- return -EIO;
- }
-
- if (cam->io == IO_MMAP) {
- DBG(3, "Close and open the device again to choose the read "
- "method");
- mutex_unlock(&cam->fileop_mutex);
- return -EBUSY;
- }
-
- if (cam->io == IO_NONE) {
- if (!zc0301_request_buffers(cam, cam->nreadbuffers, IO_READ)) {
- DBG(1, "read() failed, not enough memory");
- mutex_unlock(&cam->fileop_mutex);
- return -ENOMEM;
- }
- cam->io = IO_READ;
- cam->stream = STREAM_ON;
- }
-
- if (list_empty(&cam->inqueue)) {
- if (!list_empty(&cam->outqueue))
- zc0301_empty_framequeues(cam);
- zc0301_queue_unusedframes(cam);
- }
-
- if (!count) {
- mutex_unlock(&cam->fileop_mutex);
- return 0;
- }
-
- if (list_empty(&cam->outqueue)) {
- if (filp->f_flags & O_NONBLOCK) {
- mutex_unlock(&cam->fileop_mutex);
- return -EAGAIN;
- }
- timeout = wait_event_interruptible_timeout
- ( cam->wait_frame,
- (!list_empty(&cam->outqueue)) ||
- (cam->state & DEV_DISCONNECTED) ||
- (cam->state & DEV_MISCONFIGURED),
- msecs_to_jiffies(
- cam->module_param.frame_timeout * 1000
- )
- );
- if (timeout < 0) {
- mutex_unlock(&cam->fileop_mutex);
- return timeout;
- }
- if (cam->state & DEV_DISCONNECTED) {
- mutex_unlock(&cam->fileop_mutex);
- return -ENODEV;
- }
- if (!timeout || (cam->state & DEV_MISCONFIGURED)) {
- mutex_unlock(&cam->fileop_mutex);
- return -EIO;
- }
- }
-
- f = list_entry(cam->outqueue.prev, struct zc0301_frame_t, frame);
-
- if (count > f->buf.bytesused)
- count = f->buf.bytesused;
-
- if (copy_to_user(buf, f->bufmem, count)) {
- err = -EFAULT;
- goto exit;
- }
- *f_pos += count;
-
-exit:
- spin_lock_irqsave(&cam->queue_lock, lock_flags);
- list_for_each_entry(i, &cam->outqueue, frame)
- i->state = F_UNUSED;
- INIT_LIST_HEAD(&cam->outqueue);
- spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
- zc0301_queue_unusedframes(cam);
-
- PDBGG("Frame #%lu, bytes read: %zu",
- (unsigned long)f->buf.index, count);
-
- mutex_unlock(&cam->fileop_mutex);
-
- return err ? err : count;
-}
-
-
-static unsigned int zc0301_poll(struct file *filp, poll_table *wait)
-{
- struct zc0301_device *cam = video_drvdata(filp);
- struct zc0301_frame_t* f;
- unsigned long lock_flags;
- unsigned int mask = 0;
-
- if (mutex_lock_interruptible(&cam->fileop_mutex))
- return POLLERR;
-
- if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present");
- goto error;
- }
-
- if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it "
- "again.");
- goto error;
- }
-
- if (cam->io == IO_NONE) {
- if (!zc0301_request_buffers(cam, cam->nreadbuffers, IO_READ)) {
- DBG(1, "poll() failed, not enough memory");
- goto error;
- }
- cam->io = IO_READ;
- cam->stream = STREAM_ON;
- }
-
- if (cam->io == IO_READ) {
- spin_lock_irqsave(&cam->queue_lock, lock_flags);
- list_for_each_entry(f, &cam->outqueue, frame)
- f->state = F_UNUSED;
- INIT_LIST_HEAD(&cam->outqueue);
- spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
- zc0301_queue_unusedframes(cam);
- }
-
- poll_wait(filp, &cam->wait_frame, wait);
-
- if (!list_empty(&cam->outqueue))
- mask |= POLLIN | POLLRDNORM;
-
- mutex_unlock(&cam->fileop_mutex);
-
- return mask;
-
-error:
- mutex_unlock(&cam->fileop_mutex);
- return POLLERR;
-}
-
-
-static void zc0301_vm_open(struct vm_area_struct* vma)
-{
- struct zc0301_frame_t* f = vma->vm_private_data;
- f->vma_use_count++;
-}
-
-
-static void zc0301_vm_close(struct vm_area_struct* vma)
-{
- /* NOTE: buffers are not freed here */
- struct zc0301_frame_t* f = vma->vm_private_data;
- f->vma_use_count--;
-}
-
-
-static const struct vm_operations_struct zc0301_vm_ops = {
- .open = zc0301_vm_open,
- .close = zc0301_vm_close,
-};
-
-
-static int zc0301_mmap(struct file* filp, struct vm_area_struct *vma)
-{
- struct zc0301_device *cam = video_drvdata(filp);
- unsigned long size = vma->vm_end - vma->vm_start,
- start = vma->vm_start;
- void *pos;
- u32 i;
-
- if (mutex_lock_interruptible(&cam->fileop_mutex))
- return -ERESTARTSYS;
-
- if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present");
- mutex_unlock(&cam->fileop_mutex);
- return -ENODEV;
- }
-
- if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it "
- "again.");
- mutex_unlock(&cam->fileop_mutex);
- return -EIO;
- }
-
- if (!(vma->vm_flags & (VM_WRITE | VM_READ))) {
- mutex_unlock(&cam->fileop_mutex);
- return -EACCES;
- }
-
- if (cam->io != IO_MMAP ||
- size != PAGE_ALIGN(cam->frame[0].buf.length)) {
- mutex_unlock(&cam->fileop_mutex);
- return -EINVAL;
- }
-
- for (i = 0; i < cam->nbuffers; i++) {
- if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff)
- break;
- }
- if (i == cam->nbuffers) {
- mutex_unlock(&cam->fileop_mutex);
- return -EINVAL;
- }
-
- vma->vm_flags |= VM_IO;
- vma->vm_flags |= VM_RESERVED;
-
- pos = cam->frame[i].bufmem;
- while (size > 0) { /* size is page-aligned */
- if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
- mutex_unlock(&cam->fileop_mutex);
- return -EAGAIN;
- }
- start += PAGE_SIZE;
- pos += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
-
- vma->vm_ops = &zc0301_vm_ops;
- vma->vm_private_data = &cam->frame[i];
- zc0301_vm_open(vma);
-
- mutex_unlock(&cam->fileop_mutex);
-
- return 0;
-}
-
-/*****************************************************************************/
-
-static int
-zc0301_vidioc_querycap(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_capability cap = {
- .driver = "zc0301",
- .version = ZC0301_MODULE_VERSION_CODE,
- .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
- V4L2_CAP_STREAMING,
- };
-
- strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
- if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
- strlcpy(cap.bus_info, dev_name(&cam->usbdev->dev),
- sizeof(cap.bus_info));
-
- if (copy_to_user(arg, &cap, sizeof(cap)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_enuminput(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_input i;
-
- if (copy_from_user(&i, arg, sizeof(i)))
- return -EFAULT;
-
- if (i.index)
- return -EINVAL;
-
- memset(&i, 0, sizeof(i));
- strcpy(i.name, "Camera");
- i.type = V4L2_INPUT_TYPE_CAMERA;
-
- if (copy_to_user(arg, &i, sizeof(i)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_g_input(struct zc0301_device* cam, void __user * arg)
-{
- int index = 0;
-
- if (copy_to_user(arg, &index, sizeof(index)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_s_input(struct zc0301_device* cam, void __user * arg)
-{
- int index;
-
- if (copy_from_user(&index, arg, sizeof(index)))
- return -EFAULT;
-
- if (index != 0)
- return -EINVAL;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_query_ctrl(struct zc0301_device* cam, void __user * arg)
-{
- struct zc0301_sensor* s = &cam->sensor;
- struct v4l2_queryctrl qc;
- u8 i;
-
- if (copy_from_user(&qc, arg, sizeof(qc)))
- return -EFAULT;
-
- for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
- if (qc.id && qc.id == s->qctrl[i].id) {
- memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
- if (copy_to_user(arg, &qc, sizeof(qc)))
- return -EFAULT;
- return 0;
- }
-
- return -EINVAL;
-}
-
-
-static int
-zc0301_vidioc_g_ctrl(struct zc0301_device* cam, void __user * arg)
-{
- struct zc0301_sensor* s = &cam->sensor;
- struct v4l2_control ctrl;
- int err = 0;
- u8 i;
-
- if (!s->get_ctrl && !s->set_ctrl)
- return -EINVAL;
-
- if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
- return -EFAULT;
-
- if (!s->get_ctrl) {
- for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
- if (ctrl.id == s->qctrl[i].id) {
- ctrl.value = s->_qctrl[i].default_value;
- goto exit;
- }
- return -EINVAL;
- } else
- err = s->get_ctrl(cam, &ctrl);
-
-exit:
- if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
- return -EFAULT;
-
- return err;
-}
-
-
-static int
-zc0301_vidioc_s_ctrl(struct zc0301_device* cam, void __user * arg)
-{
- struct zc0301_sensor* s = &cam->sensor;
- struct v4l2_control ctrl;
- u8 i;
- int err = 0;
-
- if (!s->set_ctrl)
- return -EINVAL;
-
- if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
- return -EFAULT;
-
- for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) {
- if (ctrl.id == s->qctrl[i].id) {
- if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)
- return -EINVAL;
- if (ctrl.value < s->qctrl[i].minimum ||
- ctrl.value > s->qctrl[i].maximum)
- return -ERANGE;
- ctrl.value -= ctrl.value % s->qctrl[i].step;
- break;
- }
- }
- if (i == ARRAY_SIZE(s->qctrl))
- return -EINVAL;
- if ((err = s->set_ctrl(cam, &ctrl)))
- return err;
-
- s->_qctrl[i].default_value = ctrl.value;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_cropcap(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_cropcap* cc = &(cam->sensor.cropcap);
-
- cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- cc->pixelaspect.numerator = 1;
- cc->pixelaspect.denominator = 1;
-
- if (copy_to_user(arg, cc, sizeof(*cc)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_g_crop(struct zc0301_device* cam, void __user * arg)
-{
- struct zc0301_sensor* s = &cam->sensor;
- struct v4l2_crop crop = {
- .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
- };
-
- memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
-
- if (copy_to_user(arg, &crop, sizeof(crop)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_s_crop(struct zc0301_device* cam, void __user * arg)
-{
- struct zc0301_sensor* s = &cam->sensor;
- struct v4l2_crop crop;
- struct v4l2_rect* rect;
- struct v4l2_rect* bounds = &(s->cropcap.bounds);
- const enum zc0301_stream_state stream = cam->stream;
- const u32 nbuffers = cam->nbuffers;
- u32 i;
- int err = 0;
-
- if (copy_from_user(&crop, arg, sizeof(crop)))
- return -EFAULT;
-
- rect = &(crop.c);
-
- if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- if (cam->module_param.force_munmap)
- for (i = 0; i < cam->nbuffers; i++)
- if (cam->frame[i].vma_use_count) {
- DBG(3, "VIDIOC_S_CROP failed. "
- "Unmap the buffers first.");
- return -EBUSY;
- }
-
- if (!s->set_crop) {
- memcpy(rect, &(s->_rect), sizeof(*rect));
- if (copy_to_user(arg, &crop, sizeof(crop)))
- return -EFAULT;
- return 0;
- }
-
- rect->left &= ~7L;
- rect->top &= ~7L;
- if (rect->width < 8)
- rect->width = 8;
- if (rect->height < 8)
- rect->height = 8;
- if (rect->width > bounds->width)
- rect->width = bounds->width;
- if (rect->height > bounds->height)
- rect->height = bounds->height;
- if (rect->left < bounds->left)
- rect->left = bounds->left;
- if (rect->top < bounds->top)
- rect->top = bounds->top;
- if (rect->left + rect->width > bounds->left + bounds->width)
- rect->left = bounds->left+bounds->width - rect->width;
- if (rect->top + rect->height > bounds->top + bounds->height)
- rect->top = bounds->top+bounds->height - rect->height;
- rect->width &= ~7L;
- rect->height &= ~7L;
-
- if (cam->stream == STREAM_ON)
- if ((err = zc0301_stream_interrupt(cam)))
- return err;
-
- if (copy_to_user(arg, &crop, sizeof(crop))) {
- cam->stream = stream;
- return -EFAULT;
- }
-
- if (cam->module_param.force_munmap || cam->io == IO_READ)
- zc0301_release_buffers(cam);
-
- if (s->set_crop)
- err += s->set_crop(cam, rect);
-
- if (err) { /* atomic, no rollback in ioctl() */
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
- "use the camera, close and open %s again.",
- video_device_node_name(cam->v4ldev));
- return -EIO;
- }
-
- s->pix_format.width = rect->width;
- s->pix_format.height = rect->height;
- memcpy(&(s->_rect), rect, sizeof(*rect));
-
- if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
- nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) {
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
- "use the camera, close and open %s again.",
- video_device_node_name(cam->v4ldev));
- return -ENOMEM;
- }
-
- if (cam->io == IO_READ)
- zc0301_empty_framequeues(cam);
- else if (cam->module_param.force_munmap)
- zc0301_requeue_outqueue(cam);
-
- cam->stream = stream;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_enum_framesizes(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_frmsizeenum frmsize;
-
- if (copy_from_user(&frmsize, arg, sizeof(frmsize)))
- return -EFAULT;
-
- if (frmsize.index != 0 && frmsize.index != 1)
- return -EINVAL;
-
- if (frmsize.pixel_format != V4L2_PIX_FMT_JPEG)
- return -EINVAL;
-
- frmsize.type = V4L2_FRMSIZE_TYPE_DISCRETE;
-
- if (frmsize.index == 1) {
- frmsize.discrete.width = cam->sensor.cropcap.defrect.width;
- frmsize.discrete.height = cam->sensor.cropcap.defrect.height;
- }
- memset(&frmsize.reserved, 0, sizeof(frmsize.reserved));
-
- if (copy_to_user(arg, &frmsize, sizeof(frmsize)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_enum_fmt(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_fmtdesc fmtd;
-
- if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
- return -EFAULT;
-
- if (fmtd.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- if (fmtd.index == 0) {
- strcpy(fmtd.description, "JPEG");
- fmtd.pixelformat = V4L2_PIX_FMT_JPEG;
- fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
- } else
- return -EINVAL;
-
- fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
-
- if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_g_fmt(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_format format;
- struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format);
-
- if (copy_from_user(&format, arg, sizeof(format)))
- return -EFAULT;
-
- if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- pfmt->bytesperline = 0;
- pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
- pfmt->field = V4L2_FIELD_NONE;
- memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
-
- if (copy_to_user(arg, &format, sizeof(format)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd,
- void __user * arg)
-{
- struct zc0301_sensor* s = &cam->sensor;
- struct v4l2_format format;
- struct v4l2_pix_format* pix;
- struct v4l2_pix_format* pfmt = &(s->pix_format);
- struct v4l2_rect* bounds = &(s->cropcap.bounds);
- struct v4l2_rect rect;
- const enum zc0301_stream_state stream = cam->stream;
- const u32 nbuffers = cam->nbuffers;
- u32 i;
- int err = 0;
-
- if (copy_from_user(&format, arg, sizeof(format)))
- return -EFAULT;
-
- pix = &(format.fmt.pix);
-
- if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- memcpy(&rect, &(s->_rect), sizeof(rect));
-
- if (!s->set_crop) {
- pix->width = rect.width;
- pix->height = rect.height;
- } else {
- rect.width = pix->width;
- rect.height = pix->height;
- }
-
- if (rect.width < 8)
- rect.width = 8;
- if (rect.height < 8)
- rect.height = 8;
- if (rect.width > bounds->left + bounds->width - rect.left)
- rect.width = bounds->left + bounds->width - rect.left;
- if (rect.height > bounds->top + bounds->height - rect.top)
- rect.height = bounds->top + bounds->height - rect.top;
- rect.width &= ~7L;
- rect.height &= ~7L;
-
- pix->width = rect.width;
- pix->height = rect.height;
- pix->pixelformat = pfmt->pixelformat;
- pix->priv = pfmt->priv;
- pix->colorspace = pfmt->colorspace;
- pix->bytesperline = 0;
- pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
- pix->field = V4L2_FIELD_NONE;
-
- if (cmd == VIDIOC_TRY_FMT) {
- if (copy_to_user(arg, &format, sizeof(format)))
- return -EFAULT;
- return 0;
- }
-
- if (cam->module_param.force_munmap)
- for (i = 0; i < cam->nbuffers; i++)
- if (cam->frame[i].vma_use_count) {
- DBG(3, "VIDIOC_S_FMT failed. "
- "Unmap the buffers first.");
- return -EBUSY;
- }
-
- if (cam->stream == STREAM_ON)
- if ((err = zc0301_stream_interrupt(cam)))
- return err;
-
- if (copy_to_user(arg, &format, sizeof(format))) {
- cam->stream = stream;
- return -EFAULT;
- }
-
- if (cam->module_param.force_munmap || cam->io == IO_READ)
- zc0301_release_buffers(cam);
-
- if (s->set_crop)
- err += s->set_crop(cam, &rect);
-
- if (err) { /* atomic, no rollback in ioctl() */
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
- "use the camera, close and open %s again.",
- video_device_node_name(cam->v4ldev));
- return -EIO;
- }
-
- memcpy(pfmt, pix, sizeof(*pix));
- memcpy(&(s->_rect), &rect, sizeof(rect));
-
- if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
- nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) {
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
- "use the camera, close and open %s again.",
- video_device_node_name(cam->v4ldev));
- return -ENOMEM;
- }
-
- if (cam->io == IO_READ)
- zc0301_empty_framequeues(cam);
- else if (cam->module_param.force_munmap)
- zc0301_requeue_outqueue(cam);
-
- cam->stream = stream;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_g_jpegcomp(struct zc0301_device* cam, void __user * arg)
-{
- if (copy_to_user(arg, &cam->compression, sizeof(cam->compression)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_s_jpegcomp(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_jpegcompression jc;
- const enum zc0301_stream_state stream = cam->stream;
- int err = 0;
-
- if (copy_from_user(&jc, arg, sizeof(jc)))
- return -EFAULT;
-
- if (jc.quality != 0)
- return -EINVAL;
-
- if (cam->stream == STREAM_ON)
- if ((err = zc0301_stream_interrupt(cam)))
- return err;
-
- err += zc0301_set_compression(cam, &jc);
- if (err) { /* atomic, no rollback in ioctl() */
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
- "problems. To use the camera, close and open %s again.",
- video_device_node_name(cam->v4ldev));
- return -EIO;
- }
-
- cam->compression.quality = jc.quality;
-
- cam->stream = stream;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_reqbufs(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_requestbuffers rb;
- u32 i;
- int err;
-
- if (copy_from_user(&rb, arg, sizeof(rb)))
- return -EFAULT;
-
- if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
- rb.memory != V4L2_MEMORY_MMAP)
- return -EINVAL;
-
- if (cam->io == IO_READ) {
- DBG(3, "Close and open the device again to choose the mmap "
- "I/O method");
- return -EBUSY;
- }
-
- for (i = 0; i < cam->nbuffers; i++)
- if (cam->frame[i].vma_use_count) {
- DBG(3, "VIDIOC_REQBUFS failed. "
- "Previous buffers are still mapped.");
- return -EBUSY;
- }
-
- if (cam->stream == STREAM_ON)
- if ((err = zc0301_stream_interrupt(cam)))
- return err;
-
- zc0301_empty_framequeues(cam);
-
- zc0301_release_buffers(cam);
- if (rb.count)
- rb.count = zc0301_request_buffers(cam, rb.count, IO_MMAP);
-
- if (copy_to_user(arg, &rb, sizeof(rb))) {
- zc0301_release_buffers(cam);
- cam->io = IO_NONE;
- return -EFAULT;
- }
-
- cam->io = rb.count ? IO_MMAP : IO_NONE;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_querybuf(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_buffer b;
-
- if (copy_from_user(&b, arg, sizeof(b)))
- return -EFAULT;
-
- if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
- b.index >= cam->nbuffers || cam->io != IO_MMAP)
- return -EINVAL;
-
- memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
-
- if (cam->frame[b.index].vma_use_count)
- b.flags |= V4L2_BUF_FLAG_MAPPED;
-
- if (cam->frame[b.index].state == F_DONE)
- b.flags |= V4L2_BUF_FLAG_DONE;
- else if (cam->frame[b.index].state != F_UNUSED)
- b.flags |= V4L2_BUF_FLAG_QUEUED;
-
- if (copy_to_user(arg, &b, sizeof(b)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_qbuf(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_buffer b;
- unsigned long lock_flags;
-
- if (copy_from_user(&b, arg, sizeof(b)))
- return -EFAULT;
-
- if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
- b.index >= cam->nbuffers || cam->io != IO_MMAP)
- return -EINVAL;
-
- if (cam->frame[b.index].state != F_UNUSED)
- return -EINVAL;
-
- cam->frame[b.index].state = F_QUEUED;
-
- spin_lock_irqsave(&cam->queue_lock, lock_flags);
- list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
- spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
- PDBGG("Frame #%lu queued", (unsigned long)b.index);
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_dqbuf(struct zc0301_device* cam, struct file* filp,
- void __user * arg)
-{
- struct v4l2_buffer b;
- struct zc0301_frame_t *f;
- unsigned long lock_flags;
- long timeout;
-
- if (copy_from_user(&b, arg, sizeof(b)))
- return -EFAULT;
-
- if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP)
- return -EINVAL;
-
- if (list_empty(&cam->outqueue)) {
- if (cam->stream == STREAM_OFF)
- return -EINVAL;
- if (filp->f_flags & O_NONBLOCK)
- return -EAGAIN;
- timeout = wait_event_interruptible_timeout
- ( cam->wait_frame,
- (!list_empty(&cam->outqueue)) ||
- (cam->state & DEV_DISCONNECTED) ||
- (cam->state & DEV_MISCONFIGURED),
- cam->module_param.frame_timeout *
- 1000 * msecs_to_jiffies(1) );
- if (timeout < 0)
- return timeout;
- if (cam->state & DEV_DISCONNECTED)
- return -ENODEV;
- if (!timeout || (cam->state & DEV_MISCONFIGURED))
- return -EIO;
- }
-
- spin_lock_irqsave(&cam->queue_lock, lock_flags);
- f = list_entry(cam->outqueue.next, struct zc0301_frame_t, frame);
- list_del(cam->outqueue.next);
- spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
- f->state = F_UNUSED;
-
- memcpy(&b, &f->buf, sizeof(b));
- if (f->vma_use_count)
- b.flags |= V4L2_BUF_FLAG_MAPPED;
-
- if (copy_to_user(arg, &b, sizeof(b)))
- return -EFAULT;
-
- PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index);
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_streamon(struct zc0301_device* cam, void __user * arg)
-{
- int type;
-
- if (copy_from_user(&type, arg, sizeof(type)))
- return -EFAULT;
-
- if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
- return -EINVAL;
-
- cam->stream = STREAM_ON;
-
- DBG(3, "Stream on");
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_streamoff(struct zc0301_device* cam, void __user * arg)
-{
- int type, err;
-
- if (copy_from_user(&type, arg, sizeof(type)))
- return -EFAULT;
-
- if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
- return -EINVAL;
-
- if (cam->stream == STREAM_ON)
- if ((err = zc0301_stream_interrupt(cam)))
- return err;
-
- zc0301_empty_framequeues(cam);
-
- DBG(3, "Stream off");
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_g_parm(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_streamparm sp;
-
- if (copy_from_user(&sp, arg, sizeof(sp)))
- return -EFAULT;
-
- if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- sp.parm.capture.extendedmode = 0;
- sp.parm.capture.readbuffers = cam->nreadbuffers;
-
- if (copy_to_user(arg, &sp, sizeof(sp)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int
-zc0301_vidioc_s_parm(struct zc0301_device* cam, void __user * arg)
-{
- struct v4l2_streamparm sp;
-
- if (copy_from_user(&sp, arg, sizeof(sp)))
- return -EFAULT;
-
- if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- sp.parm.capture.extendedmode = 0;
-
- if (sp.parm.capture.readbuffers == 0)
- sp.parm.capture.readbuffers = cam->nreadbuffers;
-
- if (sp.parm.capture.readbuffers > ZC0301_MAX_FRAMES)
- sp.parm.capture.readbuffers = ZC0301_MAX_FRAMES;
-
- if (copy_to_user(arg, &sp, sizeof(sp)))
- return -EFAULT;
-
- cam->nreadbuffers = sp.parm.capture.readbuffers;
-
- return 0;
-}
-
-
-static long zc0301_ioctl_v4l2(struct file *filp,
- unsigned int cmd, void __user *arg)
-{
- struct zc0301_device *cam = video_drvdata(filp);
-
- switch (cmd) {
-
- case VIDIOC_QUERYCAP:
- return zc0301_vidioc_querycap(cam, arg);
-
- case VIDIOC_ENUMINPUT:
- return zc0301_vidioc_enuminput(cam, arg);
-
- case VIDIOC_G_INPUT:
- return zc0301_vidioc_g_input(cam, arg);
-
- case VIDIOC_S_INPUT:
- return zc0301_vidioc_s_input(cam, arg);
-
- case VIDIOC_QUERYCTRL:
- return zc0301_vidioc_query_ctrl(cam, arg);
-
- case VIDIOC_G_CTRL:
- return zc0301_vidioc_g_ctrl(cam, arg);
-
- case VIDIOC_S_CTRL:
- return zc0301_vidioc_s_ctrl(cam, arg);
-
- case VIDIOC_CROPCAP:
- return zc0301_vidioc_cropcap(cam, arg);
-
- case VIDIOC_G_CROP:
- return zc0301_vidioc_g_crop(cam, arg);
-
- case VIDIOC_S_CROP:
- return zc0301_vidioc_s_crop(cam, arg);
-
- case VIDIOC_ENUM_FMT:
- return zc0301_vidioc_enum_fmt(cam, arg);
-
- case VIDIOC_G_FMT:
- return zc0301_vidioc_g_fmt(cam, arg);
-
- case VIDIOC_TRY_FMT:
- case VIDIOC_S_FMT:
- return zc0301_vidioc_try_s_fmt(cam, cmd, arg);
-
- case VIDIOC_ENUM_FRAMESIZES:
- return zc0301_vidioc_enum_framesizes(cam, arg);
-
- case VIDIOC_G_JPEGCOMP:
- return zc0301_vidioc_g_jpegcomp(cam, arg);
-
- case VIDIOC_S_JPEGCOMP:
- return zc0301_vidioc_s_jpegcomp(cam, arg);
-
- case VIDIOC_REQBUFS:
- return zc0301_vidioc_reqbufs(cam, arg);
-
- case VIDIOC_QUERYBUF:
- return zc0301_vidioc_querybuf(cam, arg);
-
- case VIDIOC_QBUF:
- return zc0301_vidioc_qbuf(cam, arg);
-
- case VIDIOC_DQBUF:
- return zc0301_vidioc_dqbuf(cam, filp, arg);
-
- case VIDIOC_STREAMON:
- return zc0301_vidioc_streamon(cam, arg);
-
- case VIDIOC_STREAMOFF:
- return zc0301_vidioc_streamoff(cam, arg);
-
- case VIDIOC_G_PARM:
- return zc0301_vidioc_g_parm(cam, arg);
-
- case VIDIOC_S_PARM:
- return zc0301_vidioc_s_parm(cam, arg);
-
- case VIDIOC_G_STD:
- case VIDIOC_S_STD:
- case VIDIOC_QUERYSTD:
- case VIDIOC_ENUMSTD:
- case VIDIOC_QUERYMENU:
- case VIDIOC_ENUM_FRAMEINTERVALS:
- return -EINVAL;
-
- default:
- return -EINVAL;
-
- }
-}
-
-
-static long zc0301_ioctl(struct file *filp,
- unsigned int cmd, unsigned long arg)
-{
- struct zc0301_device *cam = video_drvdata(filp);
- int err = 0;
-
- if (mutex_lock_interruptible(&cam->fileop_mutex))
- return -ERESTARTSYS;
-
- if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present");
- mutex_unlock(&cam->fileop_mutex);
- return -ENODEV;
- }
-
- if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it "
- "again.");
- mutex_unlock(&cam->fileop_mutex);
- return -EIO;
- }
-
- V4LDBG(3, "zc0301", cmd);
-
- err = zc0301_ioctl_v4l2(filp, cmd, (void __user *)arg);
-
- mutex_unlock(&cam->fileop_mutex);
-
- return err;
-}
-
-
-static const struct v4l2_file_operations zc0301_fops = {
- .owner = THIS_MODULE,
- .open = zc0301_open,
- .release = zc0301_release,
- .ioctl = zc0301_ioctl,
- .read = zc0301_read,
- .poll = zc0301_poll,
- .mmap = zc0301_mmap,
-};
-
-/*****************************************************************************/
-
-static int
-zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
-{
- struct usb_device *udev = interface_to_usbdev(intf);
- struct zc0301_device* cam;
- static unsigned int dev_nr;
- unsigned int i;
- int err = 0;
-
- if (!(cam = kzalloc(sizeof(struct zc0301_device), GFP_KERNEL)))
- return -ENOMEM;
-
- cam->usbdev = udev;
-
- if (!(cam->control_buffer = kzalloc(4, GFP_KERNEL))) {
- DBG(1, "kmalloc() failed");
- err = -ENOMEM;
- goto fail;
- }
-
- if (!(cam->v4ldev = video_device_alloc())) {
- DBG(1, "video_device_alloc() failed");
- err = -ENOMEM;
- goto fail;
- }
-
- DBG(2, "ZC0301[P] Image Processor and Control Chip detected "
- "(vid/pid 0x%04X:0x%04X)",id->idVendor, id->idProduct);
-
- for (i = 0; zc0301_sensor_table[i]; i++) {
- err = zc0301_sensor_table[i](cam);
- if (!err)
- break;
- }
-
- if (!err)
- DBG(2, "%s image sensor detected", cam->sensor.name);
- else {
- DBG(1, "No supported image sensor detected");
- err = -ENODEV;
- goto fail;
- }
-
- if (zc0301_init(cam)) {
- DBG(1, "Initialization failed. I will retry on open().");
- cam->state |= DEV_MISCONFIGURED;
- }
-
- strcpy(cam->v4ldev->name, "ZC0301[P] PC Camera");
- cam->v4ldev->fops = &zc0301_fops;
- cam->v4ldev->release = video_device_release;
- cam->v4ldev->parent = &udev->dev;
- video_set_drvdata(cam->v4ldev, cam);
-
- init_completion(&cam->probe);
-
- err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
- video_nr[dev_nr]);
- if (err) {
- DBG(1, "V4L2 device registration failed");
- if (err == -ENFILE && video_nr[dev_nr] == -1)
- DBG(1, "Free /dev/videoX node not found");
- video_nr[dev_nr] = -1;
- dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0;
- complete_all(&cam->probe);
- goto fail;
- }
-
- DBG(2, "V4L2 device registered as %s",
- video_device_node_name(cam->v4ldev));
-
- cam->module_param.force_munmap = force_munmap[dev_nr];
- cam->module_param.frame_timeout = frame_timeout[dev_nr];
-
- dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0;
-
- usb_set_intfdata(intf, cam);
- kref_init(&cam->kref);
- usb_get_dev(cam->usbdev);
-
- complete_all(&cam->probe);
-
- return 0;
-
-fail:
- if (cam) {
- kfree(cam->control_buffer);
- if (cam->v4ldev)
- video_device_release(cam->v4ldev);
- kfree(cam);
- }
- return err;
-}
-
-
-static void zc0301_usb_disconnect(struct usb_interface* intf)
-{
- struct zc0301_device* cam;
-
- down_write(&zc0301_dev_lock);
-
- cam = usb_get_intfdata(intf);
-
- DBG(2, "Disconnecting %s...", cam->v4ldev->name);
-
- if (cam->users) {
- DBG(2, "Device %s is open! Deregistration and "
- "memory deallocation are deferred.",
- video_device_node_name(cam->v4ldev));
- cam->state |= DEV_MISCONFIGURED;
- zc0301_stop_transfer(cam);
- cam->state |= DEV_DISCONNECTED;
- wake_up_interruptible(&cam->wait_frame);
- wake_up(&cam->wait_stream);
- } else
- cam->state |= DEV_DISCONNECTED;
-
- wake_up_interruptible_all(&cam->wait_open);
-
- kref_put(&cam->kref, zc0301_release_resources);
-
- up_write(&zc0301_dev_lock);
-}
-
-
-static struct usb_driver zc0301_usb_driver = {
- .name = "zc0301",
- .id_table = zc0301_id_table,
- .probe = zc0301_usb_probe,
- .disconnect = zc0301_usb_disconnect,
-};
-
-/*****************************************************************************/
-
-static int __init zc0301_module_init(void)
-{
- int err = 0;
-
- KDBG(2, ZC0301_MODULE_NAME " v" ZC0301_MODULE_VERSION);
- KDBG(3, ZC0301_MODULE_AUTHOR);
-
- if ((err = usb_register(&zc0301_usb_driver)))
- KDBG(1, "usb_register() failed");
-
- return err;
-}
-
-
-static void __exit zc0301_module_exit(void)
-{
- usb_deregister(&zc0301_usb_driver);
-}
-
-
-module_init(zc0301_module_init);
-module_exit(zc0301_module_exit);
diff --git a/drivers/media/video/zc0301/zc0301_pas202bcb.c b/drivers/media/video/zc0301/zc0301_pas202bcb.c
deleted file mode 100644
index 24b0dfb..0000000
--- a/drivers/media/video/zc0301/zc0301_pas202bcb.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/***************************************************************************
- * Plug-in for PAS202BCB image sensor connected to the ZC0301 Image *
- * Processor and Control Chip *
- * *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> *
- * *
- * Initialization values of the ZC0301[P] have been taken from the SPCA5XX *
- * driver maintained by Michel Xhaard <mxhaard@magic.fr> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the Free Software *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
- ***************************************************************************/
-
-/*
- NOTE: Sensor controls are disabled for now, becouse changing them while
- streaming sometimes results in out-of-sync video frames. We'll use
- the default initialization, until we know how to stop and start video
- in the chip. However, the image quality still looks good under various
- light conditions.
-*/
-
-#include <linux/delay.h>
-#include "zc0301_sensor.h"
-
-
-static struct zc0301_sensor pas202bcb;
-
-
-static int pas202bcb_init(struct zc0301_device* cam)
-{
- int err = 0;
-
- err += zc0301_write_reg(cam, 0x0002, 0x00);
- err += zc0301_write_reg(cam, 0x0003, 0x02);
- err += zc0301_write_reg(cam, 0x0004, 0x80);
- err += zc0301_write_reg(cam, 0x0005, 0x01);
- err += zc0301_write_reg(cam, 0x0006, 0xE0);
- err += zc0301_write_reg(cam, 0x0098, 0x00);
- err += zc0301_write_reg(cam, 0x009A, 0x03);
- err += zc0301_write_reg(cam, 0x011A, 0x00);
- err += zc0301_write_reg(cam, 0x011C, 0x03);
- err += zc0301_write_reg(cam, 0x009B, 0x01);
- err += zc0301_write_reg(cam, 0x009C, 0xE6);
- err += zc0301_write_reg(cam, 0x009D, 0x02);
- err += zc0301_write_reg(cam, 0x009E, 0x86);
-
- err += zc0301_i2c_write(cam, 0x02, 0x02);
- err += zc0301_i2c_write(cam, 0x0A, 0x01);
- err += zc0301_i2c_write(cam, 0x0B, 0x01);
- err += zc0301_i2c_write(cam, 0x0D, 0x00);
- err += zc0301_i2c_write(cam, 0x12, 0x05);
- err += zc0301_i2c_write(cam, 0x13, 0x63);
- err += zc0301_i2c_write(cam, 0x15, 0x70);
-
- err += zc0301_write_reg(cam, 0x0101, 0xB7);
- err += zc0301_write_reg(cam, 0x0100, 0x0D);
- err += zc0301_write_reg(cam, 0x0189, 0x06);
- err += zc0301_write_reg(cam, 0x01AD, 0x00);
- err += zc0301_write_reg(cam, 0x01C5, 0x03);
- err += zc0301_write_reg(cam, 0x01CB, 0x13);
- err += zc0301_write_reg(cam, 0x0250, 0x08);
- err += zc0301_write_reg(cam, 0x0301, 0x08);
- err += zc0301_write_reg(cam, 0x018D, 0x70);
- err += zc0301_write_reg(cam, 0x0008, 0x03);
- err += zc0301_write_reg(cam, 0x01C6, 0x04);
- err += zc0301_write_reg(cam, 0x01CB, 0x07);
- err += zc0301_write_reg(cam, 0x0120, 0x11);
- err += zc0301_write_reg(cam, 0x0121, 0x37);
- err += zc0301_write_reg(cam, 0x0122, 0x58);
- err += zc0301_write_reg(cam, 0x0123, 0x79);
- err += zc0301_write_reg(cam, 0x0124, 0x91);
- err += zc0301_write_reg(cam, 0x0125, 0xA6);
- err += zc0301_write_reg(cam, 0x0126, 0xB8);
- err += zc0301_write_reg(cam, 0x0127, 0xC7);
- err += zc0301_write_reg(cam, 0x0128, 0xD3);
- err += zc0301_write_reg(cam, 0x0129, 0xDE);
- err += zc0301_write_reg(cam, 0x012A, 0xE6);
- err += zc0301_write_reg(cam, 0x012B, 0xED);
- err += zc0301_write_reg(cam, 0x012C, 0xF3);
- err += zc0301_write_reg(cam, 0x012D, 0xF8);
- err += zc0301_write_reg(cam, 0x012E, 0xFB);
- err += zc0301_write_reg(cam, 0x012F, 0xFF);
- err += zc0301_write_reg(cam, 0x0130, 0x26);
- err += zc0301_write_reg(cam, 0x0131, 0x23);
- err += zc0301_write_reg(cam, 0x0132, 0x20);
- err += zc0301_write_reg(cam, 0x0133, 0x1C);
- err += zc0301_write_reg(cam, 0x0134, 0x16);
- err += zc0301_write_reg(cam, 0x0135, 0x13);
- err += zc0301_write_reg(cam, 0x0136, 0x10);
- err += zc0301_write_reg(cam, 0x0137, 0x0D);
- err += zc0301_write_reg(cam, 0x0138, 0x0B);
- err += zc0301_write_reg(cam, 0x0139, 0x09);
- err += zc0301_write_reg(cam, 0x013A, 0x07);
- err += zc0301_write_reg(cam, 0x013B, 0x06);
- err += zc0301_write_reg(cam, 0x013C, 0x05);
- err += zc0301_write_reg(cam, 0x013D, 0x04);
- err += zc0301_write_reg(cam, 0x013E, 0x03);
- err += zc0301_write_reg(cam, 0x013F, 0x02);
- err += zc0301_write_reg(cam, 0x010A, 0x4C);
- err += zc0301_write_reg(cam, 0x010B, 0xF5);
- err += zc0301_write_reg(cam, 0x010C, 0xFF);
- err += zc0301_write_reg(cam, 0x010D, 0xF9);
- err += zc0301_write_reg(cam, 0x010E, 0x51);
- err += zc0301_write_reg(cam, 0x010F, 0xF5);
- err += zc0301_write_reg(cam, 0x0110, 0xFB);
- err += zc0301_write_reg(cam, 0x0111, 0xED);
- err += zc0301_write_reg(cam, 0x0112, 0x5F);
- err += zc0301_write_reg(cam, 0x0180, 0x00);
- err += zc0301_write_reg(cam, 0x0019, 0x00);
- err += zc0301_write_reg(cam, 0x0087, 0x20);
- err += zc0301_write_reg(cam, 0x0088, 0x21);
-
- err += zc0301_i2c_write(cam, 0x20, 0x02);
- err += zc0301_i2c_write(cam, 0x21, 0x1B);
- err += zc0301_i2c_write(cam, 0x03, 0x44);
- err += zc0301_i2c_write(cam, 0x0E, 0x01);
- err += zc0301_i2c_write(cam, 0x0F, 0x00);
-
- err += zc0301_write_reg(cam, 0x01A9, 0x14);
- err += zc0301_write_reg(cam, 0x01AA, 0x24);
- err += zc0301_write_reg(cam, 0x0190, 0x00);
- err += zc0301_write_reg(cam, 0x0191, 0x02);
- err += zc0301_write_reg(cam, 0x0192, 0x1B);
- err += zc0301_write_reg(cam, 0x0195, 0x00);
- err += zc0301_write_reg(cam, 0x0196, 0x00);
- err += zc0301_write_reg(cam, 0x0197, 0x4D);
- err += zc0301_write_reg(cam, 0x018C, 0x10);
- err += zc0301_write_reg(cam, 0x018F, 0x20);
- err += zc0301_write_reg(cam, 0x001D, 0x44);
- err += zc0301_write_reg(cam, 0x001E, 0x6F);
- err += zc0301_write_reg(cam, 0x001F, 0xAD);
- err += zc0301_write_reg(cam, 0x0020, 0xEB);
- err += zc0301_write_reg(cam, 0x0087, 0x0F);
- err += zc0301_write_reg(cam, 0x0088, 0x0E);
- err += zc0301_write_reg(cam, 0x0180, 0x40);
- err += zc0301_write_reg(cam, 0x0192, 0x1B);
- err += zc0301_write_reg(cam, 0x0191, 0x02);
- err += zc0301_write_reg(cam, 0x0190, 0x00);
- err += zc0301_write_reg(cam, 0x0116, 0x1D);
- err += zc0301_write_reg(cam, 0x0117, 0x40);
- err += zc0301_write_reg(cam, 0x0118, 0x99);
- err += zc0301_write_reg(cam, 0x0180, 0x42);
- err += zc0301_write_reg(cam, 0x0116, 0x1D);
- err += zc0301_write_reg(cam, 0x0117, 0x40);
- err += zc0301_write_reg(cam, 0x0118, 0x99);
- err += zc0301_write_reg(cam, 0x0007, 0x00);
-
- err += zc0301_i2c_write(cam, 0x11, 0x01);
-
- msleep(100);
-
- return err;
-}
-
-
-static int pas202bcb_get_ctrl(struct zc0301_device* cam,
- struct v4l2_control* ctrl)
-{
- switch (ctrl->id) {
- case V4L2_CID_EXPOSURE:
- {
- int r1 = zc0301_i2c_read(cam, 0x04, 1),
- r2 = zc0301_i2c_read(cam, 0x05, 1);
- if (r1 < 0 || r2 < 0)
- return -EIO;
- ctrl->value = (r1 << 6) | (r2 & 0x3f);
- }
- return 0;
- case V4L2_CID_RED_BALANCE:
- if ((ctrl->value = zc0301_i2c_read(cam, 0x09, 1)) < 0)
- return -EIO;
- ctrl->value &= 0x0f;
- return 0;
- case V4L2_CID_BLUE_BALANCE:
- if ((ctrl->value = zc0301_i2c_read(cam, 0x07, 1)) < 0)
- return -EIO;
- ctrl->value &= 0x0f;
- return 0;
- case V4L2_CID_GAIN:
- if ((ctrl->value = zc0301_i2c_read(cam, 0x10, 1)) < 0)
- return -EIO;
- ctrl->value &= 0x1f;
- return 0;
- case ZC0301_V4L2_CID_GREEN_BALANCE:
- if ((ctrl->value = zc0301_i2c_read(cam, 0x08, 1)) < 0)
- return -EIO;
- ctrl->value &= 0x0f;
- return 0;
- case ZC0301_V4L2_CID_DAC_MAGNITUDE:
- if ((ctrl->value = zc0301_i2c_read(cam, 0x0c, 1)) < 0)
- return -EIO;
- return 0;
- default:
- return -EINVAL;
- }
-}
-
-
-static int pas202bcb_set_ctrl(struct zc0301_device* cam,
- const struct v4l2_control* ctrl)
-{
- int err = 0;
-
- switch (ctrl->id) {
- case V4L2_CID_EXPOSURE:
- err += zc0301_i2c_write(cam, 0x04, ctrl->value >> 6);
- err += zc0301_i2c_write(cam, 0x05, ctrl->value & 0x3f);
- break;
- case V4L2_CID_RED_BALANCE:
- err += zc0301_i2c_write(cam, 0x09, ctrl->value);
- break;
- case V4L2_CID_BLUE_BALANCE:
- err += zc0301_i2c_write(cam, 0x07, ctrl->value);
- break;
- case V4L2_CID_GAIN:
- err += zc0301_i2c_write(cam, 0x10, ctrl->value);
- break;
- case ZC0301_V4L2_CID_GREEN_BALANCE:
- err += zc0301_i2c_write(cam, 0x08, ctrl->value);
- break;
- case ZC0301_V4L2_CID_DAC_MAGNITUDE:
- err += zc0301_i2c_write(cam, 0x0c, ctrl->value);
- break;
- default:
- return -EINVAL;
- }
- err += zc0301_i2c_write(cam, 0x11, 0x01);
-
- return err ? -EIO : 0;
-}
-
-
-static struct zc0301_sensor pas202bcb = {
- .name = "PAS202BCB",
- .init = &pas202bcb_init,
- .qctrl = {
- {
- .id = V4L2_CID_EXPOSURE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "exposure",
- .minimum = 0x01e5,
- .maximum = 0x3fff,
- .step = 0x0001,
- .default_value = 0x01e5,
- .flags = V4L2_CTRL_FLAG_DISABLED,
- },
- {
- .id = V4L2_CID_GAIN,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "global gain",
- .minimum = 0x00,
- .maximum = 0x1f,
- .step = 0x01,
- .default_value = 0x0c,
- .flags = V4L2_CTRL_FLAG_DISABLED,
- },
- {
- .id = ZC0301_V4L2_CID_DAC_MAGNITUDE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "DAC magnitude",
- .minimum = 0x00,
- .maximum = 0xff,
- .step = 0x01,
- .default_value = 0x00,
- .flags = V4L2_CTRL_FLAG_DISABLED,
- },
- {
- .id = V4L2_CID_RED_BALANCE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "red balance",
- .minimum = 0x00,
- .maximum = 0x0f,
- .step = 0x01,
- .default_value = 0x01,
- .flags = V4L2_CTRL_FLAG_DISABLED,
- },
- {
- .id = V4L2_CID_BLUE_BALANCE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "blue balance",
- .minimum = 0x00,
- .maximum = 0x0f,
- .step = 0x01,
- .default_value = 0x05,
- .flags = V4L2_CTRL_FLAG_DISABLED,
- },
- {
- .id = ZC0301_V4L2_CID_GREEN_BALANCE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "green balance",
- .minimum = 0x00,
- .maximum = 0x0f,
- .step = 0x01,
- .default_value = 0x00,
- .flags = V4L2_CTRL_FLAG_DISABLED,
- },
- },
- .get_ctrl = &pas202bcb_get_ctrl,
- .set_ctrl = &pas202bcb_set_ctrl,
- .cropcap = {
- .bounds = {
- .left = 0,
- .top = 0,
- .width = 640,
- .height = 480,
- },
- .defrect = {
- .left = 0,
- .top = 0,
- .width = 640,
- .height = 480,
- },
- },
- .pix_format = {
- .width = 640,
- .height = 480,
- .pixelformat = V4L2_PIX_FMT_JPEG,
- .priv = 8,
- .colorspace = V4L2_COLORSPACE_JPEG,
- },
-};
-
-
-int zc0301_probe_pas202bcb(struct zc0301_device* cam)
-{
- int r0 = 0, r1 = 0, err = 0;
- unsigned int pid = 0;
-
- err += zc0301_write_reg(cam, 0x0000, 0x01);
- err += zc0301_write_reg(cam, 0x0010, 0x0e);
- err += zc0301_write_reg(cam, 0x0001, 0x01);
- err += zc0301_write_reg(cam, 0x0012, 0x03);
- err += zc0301_write_reg(cam, 0x0012, 0x01);
- err += zc0301_write_reg(cam, 0x008d, 0x08);
-
- msleep(10);
-
- r0 = zc0301_i2c_read(cam, 0x00, 1);
- r1 = zc0301_i2c_read(cam, 0x01, 1);
-
- if (r0 < 0 || r1 < 0 || err)
- return -EIO;
-
- pid = (r0 << 4) | ((r1 & 0xf0) >> 4);
- if (pid != 0x017)
- return -ENODEV;
-
- zc0301_attach_sensor(cam, &pas202bcb);
-
- return 0;
-}
diff --git a/drivers/media/video/zc0301/zc0301_pb0330.c b/drivers/media/video/zc0301/zc0301_pb0330.c
deleted file mode 100644
index 9519aba..0000000
--- a/drivers/media/video/zc0301/zc0301_pb0330.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/***************************************************************************
- * Plug-in for PB-0330 image sensor connected to the ZC0301P Image *
- * Processor and Control Chip *
- * *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> *
- * *
- * Initialization values of the ZC0301[P] have been taken from the SPCA5XX *
- * driver maintained by Michel Xhaard <mxhaard@magic.fr> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the Free Software *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
- ***************************************************************************/
-
-#include <linux/delay.h>
-#include "zc0301_sensor.h"
-
-
-static struct zc0301_sensor pb0330;
-
-
-static int pb0330_init(struct zc0301_device* cam)
-{
- int err = 0;
-
- err += zc0301_write_reg(cam, 0x0000, 0x01);
- err += zc0301_write_reg(cam, 0x0008, 0x03);
- err += zc0301_write_reg(cam, 0x0010, 0x0A);
- err += zc0301_write_reg(cam, 0x0002, 0x00);
- err += zc0301_write_reg(cam, 0x0003, 0x02);
- err += zc0301_write_reg(cam, 0x0004, 0x80);
- err += zc0301_write_reg(cam, 0x0005, 0x01);
- err += zc0301_write_reg(cam, 0x0006, 0xE0);
- err += zc0301_write_reg(cam, 0x0001, 0x01);
- err += zc0301_write_reg(cam, 0x0012, 0x05);
- err += zc0301_write_reg(cam, 0x0012, 0x07);
- err += zc0301_write_reg(cam, 0x0098, 0x00);
- err += zc0301_write_reg(cam, 0x009A, 0x00);
- err += zc0301_write_reg(cam, 0x011A, 0x00);
- err += zc0301_write_reg(cam, 0x011C, 0x00);
- err += zc0301_write_reg(cam, 0x0012, 0x05);
-
- err += zc0301_i2c_write(cam, 0x01, 0x0006);
- err += zc0301_i2c_write(cam, 0x02, 0x0011);
- err += zc0301_i2c_write(cam, 0x03, 0x01E7);
- err += zc0301_i2c_write(cam, 0x04, 0x0287);
- err += zc0301_i2c_write(cam, 0x06, 0x0003);
- err += zc0301_i2c_write(cam, 0x07, 0x3002);
- err += zc0301_i2c_write(cam, 0x20, 0x1100);
- err += zc0301_i2c_write(cam, 0x2F, 0xF7B0);
- err += zc0301_i2c_write(cam, 0x30, 0x0005);
- err += zc0301_i2c_write(cam, 0x31, 0x0000);
- err += zc0301_i2c_write(cam, 0x34, 0x0100);
- err += zc0301_i2c_write(cam, 0x35, 0x0060);
- err += zc0301_i2c_write(cam, 0x3D, 0x068F);
- err += zc0301_i2c_write(cam, 0x40, 0x01E0);
- err += zc0301_i2c_write(cam, 0x58, 0x0078);
- err += zc0301_i2c_write(cam, 0x62, 0x0411);
-
- err += zc0301_write_reg(cam, 0x0087, 0x10);
- err += zc0301_write_reg(cam, 0x0101, 0x37);
- err += zc0301_write_reg(cam, 0x0012, 0x05);
- err += zc0301_write_reg(cam, 0x0100, 0x0D);
- err += zc0301_write_reg(cam, 0x0189, 0x06);
- err += zc0301_write_reg(cam, 0x01AD, 0x00);
- err += zc0301_write_reg(cam, 0x01C5, 0x03);
- err += zc0301_write_reg(cam, 0x01CB, 0x13);
- err += zc0301_write_reg(cam, 0x0250, 0x08);
- err += zc0301_write_reg(cam, 0x0301, 0x08);
- err += zc0301_write_reg(cam, 0x01A8, 0x60);
- err += zc0301_write_reg(cam, 0x018D, 0x6C);
- err += zc0301_write_reg(cam, 0x01AD, 0x09);
- err += zc0301_write_reg(cam, 0x01AE, 0x15);
- err += zc0301_write_reg(cam, 0x010A, 0x50);
- err += zc0301_write_reg(cam, 0x010B, 0xF8);
- err += zc0301_write_reg(cam, 0x010C, 0xF8);
- err += zc0301_write_reg(cam, 0x010D, 0xF8);
- err += zc0301_write_reg(cam, 0x010E, 0x50);
- err += zc0301_write_reg(cam, 0x010F, 0xF8);
- err += zc0301_write_reg(cam, 0x0110, 0xF8);
- err += zc0301_write_reg(cam, 0x0111, 0xF8);
- err += zc0301_write_reg(cam, 0x0112, 0x50);
- err += zc0301_write_reg(cam, 0x0008, 0x03);
- err += zc0301_write_reg(cam, 0x01C6, 0x08);
- err += zc0301_write_reg(cam, 0x01CB, 0x0F);
- err += zc0301_write_reg(cam, 0x010A, 0x50);
- err += zc0301_write_reg(cam, 0x010B, 0xF8);
- err += zc0301_write_reg(cam, 0x010C, 0xF8);
- err += zc0301_write_reg(cam, 0x010D, 0xF8);
- err += zc0301_write_reg(cam, 0x010E, 0x50);
- err += zc0301_write_reg(cam, 0x010F, 0xF8);
- err += zc0301_write_reg(cam, 0x0110, 0xF8);
- err += zc0301_write_reg(cam, 0x0111, 0xF8);
- err += zc0301_write_reg(cam, 0x0112, 0x50);
- err += zc0301_write_reg(cam, 0x0180, 0x00);
- err += zc0301_write_reg(cam, 0x0019, 0x00);
-
- err += zc0301_i2c_write(cam, 0x05, 0x0066);
- err += zc0301_i2c_write(cam, 0x09, 0x02B2);
- err += zc0301_i2c_write(cam, 0x10, 0x0002);
-
- err += zc0301_write_reg(cam, 0x011D, 0x60);
- err += zc0301_write_reg(cam, 0x0190, 0x00);
- err += zc0301_write_reg(cam, 0x0191, 0x07);
- err += zc0301_write_reg(cam, 0x0192, 0x8C);
- err += zc0301_write_reg(cam, 0x0195, 0x00);
- err += zc0301_write_reg(cam, 0x0196, 0x00);
- err += zc0301_write_reg(cam, 0x0197, 0x8A);
- err += zc0301_write_reg(cam, 0x018C, 0x10);
- err += zc0301_write_reg(cam, 0x018F, 0x20);
- err += zc0301_write_reg(cam, 0x01A9, 0x14);
- err += zc0301_write_reg(cam, 0x01AA, 0x24);
- err += zc0301_write_reg(cam, 0x001D, 0xD7);
- err += zc0301_write_reg(cam, 0x001E, 0xF0);
- err += zc0301_write_reg(cam, 0x001F, 0xF8);
- err += zc0301_write_reg(cam, 0x0020, 0xFF);
- err += zc0301_write_reg(cam, 0x01AD, 0x09);
- err += zc0301_write_reg(cam, 0x01AE, 0x15);
- err += zc0301_write_reg(cam, 0x0180, 0x40);
- err += zc0301_write_reg(cam, 0x0180, 0x42);
-
- msleep(100);
-
- return err;
-}
-
-
-static struct zc0301_sensor pb0330 = {
- .name = "PB-0330",
- .init = &pb0330_init,
- .cropcap = {
- .bounds = {
- .left = 0,
- .top = 0,
- .width = 640,
- .height = 480,
- },
- .defrect = {
- .left = 0,
- .top = 0,
- .width = 640,
- .height = 480,
- },
- },
- .pix_format = {
- .width = 640,
- .height = 480,
- .pixelformat = V4L2_PIX_FMT_JPEG,
- .priv = 8,
- .colorspace = V4L2_COLORSPACE_JPEG,
- },
-};
-
-
-int zc0301_probe_pb0330(struct zc0301_device* cam)
-{
- int r0, err = 0;
-
- err += zc0301_write_reg(cam, 0x0000, 0x01);
- err += zc0301_write_reg(cam, 0x0010, 0x0a);
- err += zc0301_write_reg(cam, 0x0001, 0x01);
- err += zc0301_write_reg(cam, 0x0012, 0x03);
- err += zc0301_write_reg(cam, 0x0012, 0x01);
-
- msleep(10);
-
- r0 = zc0301_i2c_read(cam, 0x00, 2);
-
- if (r0 < 0 || err)
- return -EIO;
-
- if (r0 != 0x8243)
- return -ENODEV;
-
- zc0301_attach_sensor(cam, &pb0330);
-
- return 0;
-}
diff --git a/drivers/media/video/zc0301/zc0301_sensor.h b/drivers/media/video/zc0301/zc0301_sensor.h
deleted file mode 100644
index 0be783c..0000000
--- a/drivers/media/video/zc0301/zc0301_sensor.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/***************************************************************************
- * API for image sensors connected to the ZC0301[P] Image Processor and *
- * Control Chip *
- * *
- * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the Free Software *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
- ***************************************************************************/
-
-#ifndef _ZC0301_SENSOR_H_
-#define _ZC0301_SENSOR_H_
-
-#include <linux/usb.h>
-#include <linux/videodev2.h>
-#include <linux/device.h>
-#include <linux/stddef.h>
-#include <linux/errno.h>
-#include <asm/types.h>
-
-struct zc0301_device;
-struct zc0301_sensor;
-
-/*****************************************************************************/
-
-extern int zc0301_probe_pas202bcb(struct zc0301_device* cam);
-extern int zc0301_probe_pb0330(struct zc0301_device* cam);
-
-#define ZC0301_SENSOR_TABLE \
-/* Weak detections must go at the end of the list */ \
-static int (*zc0301_sensor_table[])(struct zc0301_device*) = { \
- &zc0301_probe_pas202bcb, \
- &zc0301_probe_pb0330, \
- NULL, \
-};
-
-extern struct zc0301_device*
-zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id);
-
-extern void
-zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor);
-
-#define ZC0301_USB_DEVICE(vend, prod, intclass) \
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
- USB_DEVICE_ID_MATCH_INT_CLASS, \
- .idVendor = (vend), \
- .idProduct = (prod), \
- .bInterfaceClass = (intclass)
-
-#if !defined CONFIG_USB_GSPCA_ZC3XX && !defined CONFIG_USB_GSPCA_ZC3XX_MODULE
-#define ZC0301_ID_TABLE \
-static const struct usb_device_id zc0301_id_table[] = { \
- { ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */ \
- { ZC0301_USB_DEVICE(0x0ac8, 0x303b, 0xff), }, /* PB-0330 */ \
- { } \
-};
-#else
-#define ZC0301_ID_TABLE \
-static const struct usb_device_id zc0301_id_table[] = { \
- { ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */ \
- { } \
-};
-#endif
-
-/*****************************************************************************/
-
-extern int zc0301_write_reg(struct zc0301_device*, u16 index, u16 value);
-extern int zc0301_read_reg(struct zc0301_device*, u16 index);
-extern int zc0301_i2c_write(struct zc0301_device*, u16 address, u16 value);
-extern int zc0301_i2c_read(struct zc0301_device*, u16 address, u8 length);
-
-/*****************************************************************************/
-
-#define ZC0301_MAX_CTRLS (V4L2_CID_LASTP1 - V4L2_CID_BASE + 10)
-#define ZC0301_V4L2_CID_DAC_MAGNITUDE (V4L2_CID_PRIVATE_BASE + 0)
-#define ZC0301_V4L2_CID_GREEN_BALANCE (V4L2_CID_PRIVATE_BASE + 1)
-
-struct zc0301_sensor {
- char name[32];
-
- struct v4l2_queryctrl qctrl[ZC0301_MAX_CTRLS];
- struct v4l2_cropcap cropcap;
- struct v4l2_pix_format pix_format;
-
- int (*init)(struct zc0301_device*);
- int (*get_ctrl)(struct zc0301_device*, struct v4l2_control* ctrl);
- int (*set_ctrl)(struct zc0301_device*,
- const struct v4l2_control* ctrl);
- int (*set_crop)(struct zc0301_device*, const struct v4l2_rect* rect);
-
- /* Private */
- struct v4l2_queryctrl _qctrl[ZC0301_MAX_CTRLS];
- struct v4l2_rect _rect;
-};
-
-#endif /* _ZC0301_SENSOR_H_ */
--
1.6.5.2
^ permalink raw reply related [flat|nested] 9+ messages in thread