From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ms16-1.1blu.de ([89.202.0.34]:35211 "EHLO ms16-1.1blu.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933931Ab0FFCAO (ORCPT ); Sat, 5 Jun 2010 22:00:14 -0400 Date: Sun, 6 Jun 2010 04:00:11 +0200 From: Lars Schotte To: Devin Heitmueller Cc: linux-media@vger.kernel.org Subject: Re: hvr4000 doesnt work w/ dvb-s2 nor DVB-T Message-ID: <20100606040011.30c94d18@romy.gusto> In-Reply-To: References: <20100606010752.4a138f82@romy.gusto> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: thanks for your response. really! its a pretty good sign, but as long as i have no stream running its worth nothing. and Yes, I used szap-s2 and was careful about what it answerd. so I am sure that it was all right. On Sat, 5 Jun 2010 21:33:24 -0400 Devin Heitmueller wrote: > On Sat, Jun 5, 2010 at 7:07 PM, Lars Schotte > wrote: > > so basically my question is, what makes you think, that HVR4000 is > > able to play DVB-S2 streams when it doesn't?! > > Well, the fact that the developer who added the Linux S2-API support > did it for that card would be a pretty good indicator that it should > work. > > > so I have tried this out, run w_scan which printed me also all the > > DVB-S2 channels out and provided me a tuning list (channels.conf) > > and then I tried to tune in w/ "szap-s2 -S 1 -c > > ~/.mplayer/channels.conf ZDFHD" > > If w_scan gave you a channel list, that is a pretty good sign that the > card is working. You probably are just feeding the zap tool the wrong > arguments (something which someone who has more familiarity than I do > with dvb-s2 would probably be able to help you with. > > Devin >