From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ms16-1.1blu.de ([89.202.0.34]:56162 "EHLO ms16-1.1blu.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751266Ab0FFT2T (ORCPT ); Sun, 6 Jun 2010 15:28:19 -0400 Date: Sun, 6 Jun 2010 21:28:14 +0200 From: Lars Schotte To: Niels Wagenaar Cc: linux-media@vger.kernel.org Subject: Re: [linux-dvb] hvr4000 doesnt work w/ dvb-s2 nor DVB-T Message-ID: <20100606212814.1e55206c@romy.gusto> In-Reply-To: References: <20100606010311.6d98ef7b@romy.gusto> <20100606084301.GA3070@gmail.com> <20100606133946.76c3a6e0@romy.gusto> <20100606124925.GB3070@gmail.com> <20100606145154.60de422e@romy.gusto> <20100606125636.GC3070@gmail.com> <20100606150554.55be1852@romy.gusto> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: OK, i am using w_scan, it scanned and found DVB-S2 channels but szap-s2 doesnt tune in and there is no data, exactly like i said, so either you are lying and you have none of this things running or you were paid by huappauge to say this. i am using fedora 13 and HVR4000 and only DVB-S works. mplayer has the same problem and again - I have no diseq switch installed. On Sun, 6 Jun 2010 15:28:07 +0200 Niels Wagenaar wrote: > No offence. But all these problems are complete FUD. I've been using a > HVR-4000 and a NOVA-HD-S2 since VDR 1.7.0 (which required multiproto) > and since I made the S2API-patch for VDR 1.7.0 (which I released in > October 2009). I've never experienced these issues in the past 1,5 > years. > > DiSEqC handling is no problem at all. I've set it up with DiSEqC 1.0 > and 1.2 in combination with VDR. And I've never seen any lock problems > with DVB-S2 channels using QPSK or 8PSK modulation on Hotbird 13.0e, > Astra 19.2e, Astra 23.5e and Astra 28.2e. > > If you need channellists (why even use something like szap, scan or > wscan if you can download it yourself), just go to Linowsat [1] or VDR > Settings [2]. And here's an example for a diseqc.conf which I've used > since the beginning: > > # port 1 option a position a -> Astra 19.2e > # port 2 option a position b -> Hotbird 13.0e > # port 3 option b position a -> Astra 23.5e > # port 4 option b position b -> Astra 28.2e / Eurobird 28.5e > # > # port 1 > S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W100 [E0 10 38 F0] W100 > [E0 11 00] W100 A W15 t > S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W100 [E0 10 38 F1] W100 > [E0 11 00] W100 A W15 T > S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W100 [E0 10 38 F2] W100 > [E0 11 00] W100 A W15 t > S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W100 [E0 10 38 F3] W100 > [E0 11 00] W100 A W15 T > # port 2 > S13.0E 11700 V 9750 t v W15 [E0 10 38 F4] W100 [E0 10 38 F4] W100 > [E0 11 00] W100 B W15 t > S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W100 [E0 10 38 F5] W100 > [E0 11 00] W100 B W15 T > S13.0E 11700 H 9750 t V W15 [E0 10 38 F6] W100 [E0 10 38 F6] W100 > [E0 11 00] W100 B W15 t > S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W100 [E0 10 38 F7] W100 > [E0 11 00] W100 B W15 T > # port 3 > S23.5E 11700 V 9750 t v W15 [E0 10 38 F8] W100 [E0 10 38 F8] W100 > [E0 11 00] W100 A W15 t > S23.5E 99999 V 10600 t v W15 [E0 10 38 F9] W100 [E0 10 38 F9] W100 > [E0 11 00] W100 A W15 T > S23.5E 11700 H 9750 t V W15 [E0 10 38 FA] W100 [E0 10 38 FA] W100 > [E0 11 00] W100 A W15 t > S23.5E 99999 H 10600 t V W15 [E0 10 38 FB] W100 [E0 10 38 FB] W100 > [E0 11 00] W100 A W15 T > # port 4 > S28.2E 11700 V 9750 t v W15 [E0 10 38 FC] W100 [E0 10 38 FC] W100 > [E0 11 00] W100 B W15 t > S28.2E 99999 V 10600 t v W15 [E0 10 38 FD] W100 [E0 10 38 FD] W100 > [E0 11 00] W100 B W15 T > S28.2E 11700 H 9750 t V W15 [E0 10 38 FE] W100 [E0 10 38 FE] W100 > [E0 11 00] W100 B W15 t > S28.2E 99999 H 10600 t V W15 [E0 10 38 FF] W100 [E0 10 38 FF] W100 > [E0 11 00] W100 B W15 T > S28.5E 11700 V 9750 t v W15 [E0 10 38 FC] W100 [E0 10 38 FC] W100 > [E0 11 00] W100 B W15 t > S28.5E 99999 V 10600 t v W15 [E0 10 38 FD] W100 [E0 10 38 FD] W100 > [E0 11 00] W100 B W15 T > S28.5E 11700 H 9750 t V W15 [E0 10 38 FE] W100 [E0 10 38 FE] W100 > [E0 11 00] W100 B W15 t > S28.5E 99999 H 10600 t V W15 [E0 10 38 FF] W100 [E0 10 38 FF] W100 > [E0 11 00] W100 B W15 T > > > 2010/6/6 Lars Schotte : > > I dont have a Diseq swich installed at the moment. > > > > On Sun, 6 Jun 2010 14:56:36 +0200 > > Gregoire Favre wrote: > > > >> On Sun, Jun 06, 2010 at 02:51:54PM +0200, Lars Schotte wrote: > >> > >> > ah. so i see you had some problems as well. thats better, > >> > because as long as i am not the only one maybe some time it will > >> > work. > >> > >> ??? It was the developpement process and Disecq wasn't working > >> right in the driver, which is now fixed, so the time I spent for > >> this card should be good for you. > >