From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp5-g21.free.fr ([212.27.42.5]:43602 "EHLO smtp5-g21.free.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758032Ab0G2Q4X convert rfc822-to-8bit (ORCPT ); Thu, 29 Jul 2010 12:56:23 -0400 Date: Thu, 29 Jul 2010 18:57:10 +0200 From: Jean-Francois Moine To: Hasan SAHIN Cc: linux-media@vger.kernel.org Subject: Re: gspca_zc3xx module Message-ID: <20100729185710.42979135@tele> In-Reply-To: <4C517241.9050502@gmx.com> References: <4C517241.9050502@gmx.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8BIT Sender: linux-media-owner@vger.kernel.org List-ID: On Thu, 29 Jul 2010 12:21:21 +0000 Hasan SAHIN wrote: > Hello Jean-Francois, > > I am using Gentoo linux stable x86 with kernel 2.6.34-r1. > before the kernel update to 2.6.34-r1, I was using 2.6.32-r7 and > there was no problem with webcam. > The webcam was working as good with kernel 2.6.32-r7(old gentoo > stable kernel) > but right now it does not work with the kernel 2.6.34-r1 (new gentoo > stable kernel) > > And also I have tried with ubuntu 10.04 (kernel 2.6.32-25) and > working good. I could not understood what is the problem. (Problem > is : there is no output, no stream) [snip] > gspca: probing 0ac8:303b > zc3xx: probe 2wr ov vga 0x0000 > zc3xx: probe 3wr vga 1 0xc001 > zc3xx: probe sensor -> 0013 > zc3xx: Find Sensor MI0360SOC. Chip revision c001 [snip] Hello Hasan, In the kernel 2.6.34, the sensor mi0360soc sequences have been changed to make the webcams 0ac8:301b work, but these sequences are wrong for the webcams 0ac8:303b. An other user is testing the fix which is in my test tarball (see my home page below - current version 2.10.4). There is just one remaining problem: the image is mirrored, and I have not found yet how to set it normal... Best regards. -- Ken ar c'hentañ | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/