knc1 dvb-c card frequently looses CAM when switching channels quickly

knc1 dvb-c card frequently looses CAM when switching channels quickly

[Halim Sahin]

Hello,
I have experienced the following on my vdr machine:

When changing channels quickly between encrypted channels, the card
loosses cam and I get the following in my /var/log/messages:


[   67.645354] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[   84.659047] budget-av: cam inserted A
[   85.656855] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[60706.931218] budget-av: cam inserted A
[60707.485891] dvb_ca adapter 0: DVB CAM detected and initialised
successfully


lspci -vvv

03:00.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
	Subsystem: KNC One Device 0022
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (3750ns min, 9500ns max)
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=512]
	Kernel driver in use: budget_av

I am using drivers from kernel 2.6.34.
Any Ideas for solving this issue?
Thx.
Halim

knc1 dvb-c card frequently looses CAM when switching channels quickly

[Halim Sahin]

Hi,
Really no idea?
BR.
halim

Hello,
I have experienced the following on my vdr machine:

When changing channels quickly between encrypted channels, the card
loosses cam and I get the following in my /var/log/messages:


[   67.645354] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[   84.659047] budget-av: cam inserted A
[   85.656855] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[60706.931218] budget-av: cam inserted A
[60707.485891] dvb_ca adapter 0: DVB CAM detected and initialised
successfully


lspci -vvv

03:00.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
	Subsystem: KNC One Device 0022
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (3750ns min, 9500ns max)
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=512]
	Kernel driver in use: budget_av

I am using drivers from kernel 2.6.34.
Any Ideas for solving this issue?
Thx.
Halim

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html