From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: Srinivasa.Deevi@conexant.com, Palash.Bandyopadhyay@conexant.com,
dheitmueller@kernellabs.com,
Linux Media Mailing List <linux-media@vger.kernel.org>
Subject: [PATCH 04/10] V4L/DVB: cx231xx: properly implement URB control messages log
Date: Tue, 28 Sep 2010 15:46:56 -0300 [thread overview]
Message-ID: <20100928154656.2a4548d8@pedra> (raw)
In-Reply-To: <cover.1285699057.git.mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cx231xx/cx231xx-core.c b/drivers/media/video/cx231xx/cx231xx-core.c
index 5406ff2..983b120 100644
--- a/drivers/media/video/cx231xx/cx231xx-core.c
+++ b/drivers/media/video/cx231xx/cx231xx-core.c
@@ -47,11 +47,6 @@ static unsigned int reg_debug;
module_param(reg_debug, int, 0644);
MODULE_PARM_DESC(reg_debug, "enable debug messages [URB reg]");
-#define cx231xx_regdbg(fmt, arg...) do {\
- if (reg_debug) \
- printk(KERN_INFO "%s %s :"fmt, \
- dev->name, __func__ , ##arg); } while (0)
-
static int alt = CX231XX_PINOUT;
module_param(alt, int, 0644);
MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint");
@@ -240,6 +235,66 @@ int cx231xx_send_usb_command(struct cx231xx_i2c *i2c_bus,
EXPORT_SYMBOL_GPL(cx231xx_send_usb_command);
/*
+ * Sends/Receives URB control messages, assuring to use a kalloced buffer
+ * for all operations (dev->urb_buf), to avoid using stacked buffers, as
+ * they aren't safe for usage with USB, due to DMA restrictions.
+ * Also implements the debug code for control URB's.
+ */
+static int __usb_control_msg(struct cx231xx *dev, unsigned int pipe,
+ __u8 request, __u8 requesttype, __u16 value, __u16 index,
+ void *data, __u16 size, int timeout)
+{
+ int rc, i;
+
+ if (reg_debug) {
+ printk(KERN_DEBUG "%s: (pipe 0x%08x): "
+ "%s: %02x %02x %02x %02x %02x %02x %02x %02x ",
+ dev->name,
+ pipe,
+ (requesttype & USB_DIR_IN) ? "IN" : "OUT",
+ requesttype,
+ request,
+ value & 0xff, value >> 8,
+ index & 0xff, index >> 8,
+ size & 0xff, size >> 8);
+ if (!(requesttype & USB_DIR_IN)) {
+ printk(KERN_CONT ">>>");
+ for (i = 0; i < size; i++)
+ printk(KERN_CONT " %02x",
+ ((unsigned char *)data)[i]);
+ }
+ }
+
+ /* Do the real call to usb_control_msg */
+ mutex_lock(&dev->ctrl_urb_lock);
+ if (!(requesttype & USB_DIR_IN) && size)
+ memcpy(dev->urb_buf, data, size);
+ rc = usb_control_msg(dev->udev, pipe, request, requesttype, value,
+ index, dev->urb_buf, size, timeout);
+ if ((requesttype & USB_DIR_IN) && size)
+ memcpy(data, dev->urb_buf, size);
+ mutex_unlock(&dev->ctrl_urb_lock);
+
+ if (reg_debug) {
+ if (unlikely(rc < 0)) {
+ printk(KERN_CONT "FAILED!\n");
+ return rc;
+ }
+
+ if ((requesttype & USB_DIR_IN)) {
+ printk(KERN_CONT "<<<");
+ for (i = 0; i < size; i++)
+ printk(KERN_CONT " %02x",
+ ((unsigned char *)data)[i]);
+ }
+ printk(KERN_CONT "\n");
+ }
+
+ return rc;
+}
+
+
+/*
* cx231xx_read_ctrl_reg()
* reads data from the usb device specifying bRequest and wValue
*/
@@ -276,39 +331,9 @@ int cx231xx_read_ctrl_reg(struct cx231xx *dev, u8 req, u16 reg,
if (val == 0xFF)
return -EINVAL;
- if (reg_debug) {
- cx231xx_isocdbg("(pipe 0x%08x): "
- "IN: %02x %02x %02x %02x %02x %02x %02x %02x ",
- pipe,
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- req, 0, val,
- reg & 0xff, reg >> 8, len & 0xff, len >> 8);
- }
-
- mutex_lock(&dev->ctrl_urb_lock);
- ret = usb_control_msg(dev->udev, pipe, req,
+ ret = __usb_control_msg(dev, pipe, req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- val, reg, dev->urb_buf, len, HZ);
- if (ret < 0) {
- cx231xx_isocdbg(" failed!\n");
- mutex_unlock(&dev->ctrl_urb_lock);
- return ret;
- }
-
- if (len)
- memcpy(buf, dev->urb_buf, len);
-
- mutex_unlock(&dev->ctrl_urb_lock);
-
- if (reg_debug) {
- int byte;
-
- cx231xx_isocdbg("<<<");
- for (byte = 0; byte < len; byte++)
- cx231xx_isocdbg(" %02x", (unsigned char)buf[byte]);
- cx231xx_isocdbg("\n");
- }
-
+ val, reg, buf, len, HZ);
return ret;
}
@@ -331,28 +356,10 @@ int cx231xx_send_vendor_cmd(struct cx231xx *dev,
else
pipe = usb_sndctrlpipe(dev->udev, 0);
- if (reg_debug) {
- int byte;
-
- cx231xx_isocdbg("(pipe 0x%08x): "
- "OUT: %02x %02x %02x %04x %04x %04x >>>",
- pipe,
- ven_req->
- direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- ven_req->bRequest, 0, ven_req->wValue,
- ven_req->wIndex, ven_req->wLength);
-
- for (byte = 0; byte < ven_req->wLength; byte++)
- cx231xx_isocdbg(" %02x",
- (unsigned char)ven_req->pBuff[byte]);
- cx231xx_isocdbg("\n");
- }
-
-
-/*
-If the cx23102 read more than 4 bytes with i2c bus,
-need chop to 4 byte per request
-*/
+ /*
+ * If the cx23102 read more than 4 bytes with i2c bus,
+ * need chop to 4 byte per request
+ */
if ((ven_req->wLength > 4) && ((ven_req->bRequest == 0x4) ||
(ven_req->bRequest == 0x5) ||
(ven_req->bRequest == 0x6))) {
@@ -362,71 +369,39 @@ need chop to 4 byte per request
unsend_size = ven_req->wLength;
- mutex_lock(&dev->ctrl_urb_lock);
- /* the first package*/
+ /* the first package */
ven_req->wValue = ven_req->wValue & 0xFFFB;
ven_req->wValue = (ven_req->wValue & 0xFFBD) | 0x2;
- /*printk(KERN_INFO " !!!!! 0x%x 0x%x 0x%x 0x%x \n",
- ven_req->bRequest,
- ven_req->direction | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE,ven_req->wValue,ven_req->wIndex);*/
- ret = usb_control_msg(dev->udev, pipe, ven_req->bRequest,
- ven_req->
- direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ ret = __usb_control_msg(dev, pipe, ven_req->bRequest,
+ ven_req->direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
ven_req->wValue, ven_req->wIndex, pdata,
0x0004, HZ);
unsend_size = unsend_size - 4;
- mutex_unlock(&dev->ctrl_urb_lock);
- /* the middle package*/
+ /* the middle package */
ven_req->wValue = (ven_req->wValue & 0xFFBD) | 0x42;
while (unsend_size - 4 > 0) {
pdata = pdata + 4;
- /*printk(KERN_INFO " !!!!! 0x%x 0x%x 0x%x 0x%x \n",
+ ret = __usb_control_msg(dev, pipe,
ven_req->bRequest,
- ven_req->direction | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE,
- ven_req->wValue,ven_req->wIndex);*/
- mutex_lock(&dev->ctrl_urb_lock);
- ret = usb_control_msg(dev->udev, pipe,
- ven_req->bRequest,
- ven_req->
- direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ ven_req->direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
ven_req->wValue, ven_req->wIndex, pdata,
0x0004, HZ);
- mutex_unlock(&dev->ctrl_urb_lock);
unsend_size = unsend_size - 4;
}
-
- /* the last package*/
+ /* the last package */
ven_req->wValue = (ven_req->wValue & 0xFFBD) | 0x40;
pdata = pdata + 4;
- /*printk(KERN_INFO " !!!!! 0x%x 0x%x 0x%x 0x%x \n",
- ven_req->bRequest,
- ven_req->direction | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE,ven_req->wValue,ven_req->wIndex);*/
- mutex_lock(&dev->ctrl_urb_lock);
- ret = usb_control_msg(dev->udev, pipe, ven_req->bRequest,
- ven_req->
- direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ ret = __usb_control_msg(dev, pipe, ven_req->bRequest,
+ ven_req->direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
ven_req->wValue, ven_req->wIndex, pdata,
unsend_size, HZ);
- mutex_unlock(&dev->ctrl_urb_lock);
- /*printk(KERN_INFO " @@@@@ temp_buffer[0]=0x%x 0x%x 0x%x 0x%x
- 0x%x 0x%x\n",ven_req->pBuff[0],ven_req->pBuff[1],
- ven_req->pBuff[2], ven_req->pBuff[3],ven_req->pBuff[4],
- ven_req->pBuff[5]);*/
-
} else {
- mutex_lock(&dev->ctrl_urb_lock);
- ret = usb_control_msg(dev->udev, pipe, ven_req->bRequest,
- ven_req->
- direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ ret = __usb_control_msg(dev, pipe, ven_req->bRequest,
+ ven_req->direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
ven_req->wValue, ven_req->wIndex,
- ven_req->pBuff, ven_req->wLength, HZ);
- mutex_unlock(&dev->ctrl_urb_lock);
-
+ ven_req->pBuff, ven_req->wLength, HZ);
}
return ret;
@@ -484,12 +459,9 @@ int cx231xx_write_ctrl_reg(struct cx231xx *dev, u8 req, u16 reg, char *buf,
cx231xx_isocdbg("\n");
}
- mutex_lock(&dev->ctrl_urb_lock);
- memcpy(dev->urb_buf, buf, len);
- ret = usb_control_msg(dev->udev, pipe, req,
+ ret = __usb_control_msg(dev, pipe, req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- val, reg, dev->urb_buf, len, HZ);
- mutex_unlock(&dev->ctrl_urb_lock);
+ val, reg, buf, len, HZ);
return ret;
}
--
1.7.1
next prev parent reply other threads:[~2010-09-28 18:50 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1285699057.git.mchehab@redhat.com>
2010-09-28 18:46 ` [PATCH 01/10] V4L/DVB: cx231xx: remove a printk warning at -avcore and at -417 Mauro Carvalho Chehab
2010-10-07 21:48 ` Mauro Carvalho Chehab
2010-10-07 22:04 ` Devin Heitmueller
2010-10-07 23:09 ` Mauro Carvalho Chehab
2010-10-08 0:31 ` Mauro Carvalho Chehab
2010-09-28 18:46 ` [PATCH 02/10] V4L/DVB: cx231xx: fix Kconfig dependencies Mauro Carvalho Chehab
2010-09-28 18:46 ` [PATCH 03/10] V4L/DVB: tda18271: Add some hint about what tda18217 reg ID returned Mauro Carvalho Chehab
2010-09-29 12:29 ` Devin Heitmueller
2010-09-30 18:57 ` Michael Krufky
2010-09-30 19:16 ` Mauro Carvalho Chehab
2010-09-30 19:27 ` Michael Krufky
2010-09-30 19:58 ` Mauro Carvalho Chehab
2010-09-30 20:26 ` Mauro Carvalho Chehab
2010-09-30 21:03 ` Michael Krufky
2010-10-01 5:47 ` Mauro Carvalho Chehab
2010-09-28 18:46 ` Mauro Carvalho Chehab [this message]
2010-09-28 18:46 ` [PATCH 05/10] V4L/DVB: cx231xx: properly use the right tuner i2c address Mauro Carvalho Chehab
2010-09-28 18:46 ` [PATCH 06/10] V4L/DVB: cx231xx: better handle the master port enable command Mauro Carvalho Chehab
2010-09-28 18:46 ` [PATCH 07/10] V4L/DVB: cx231xx: Only change gpio direction when needed Mauro Carvalho Chehab
2010-09-28 18:46 ` [PATCH 08/10] V4L/DVB: tda18271: allow restricting max out to 4 bytes Mauro Carvalho Chehab
2010-09-29 12:29 ` Devin Heitmueller
2010-09-30 18:52 ` Michael Krufky
2010-09-30 19:12 ` Mauro Carvalho Chehab
2010-09-30 19:18 ` Michael Krufky
2010-09-30 19:48 ` Mauro Carvalho Chehab
2010-09-30 22:00 ` Antti Palosaari
2010-09-30 22:07 ` Michael Krufky
2010-10-01 5:46 ` Mauro Carvalho Chehab
2010-09-28 18:47 ` [PATCH 09/10] V4L/DVB: tda18271: Add debug message with frequency divisor Mauro Carvalho Chehab
2010-09-29 12:30 ` Devin Heitmueller
2010-09-30 19:03 ` Michael Krufky
2010-09-30 19:16 ` Mauro Carvalho Chehab
2010-09-28 18:47 ` [PATCH 10/10] V4L/DVB: cx231xx-audio: fix some locking issues Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100928154656.2a4548d8@pedra \
--to=mchehab@redhat.com \
--cc=Palash.Bandyopadhyay@conexant.com \
--cc=Srinivasa.Deevi@conexant.com \
--cc=dheitmueller@kernellabs.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox