From: Albin Kauffmann <albin.kauffmann@gmail.com>
To: fabio tirapelle <ftirapelle@yahoo.it>
Cc: linux-media@vger.kernel.org
Subject: Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
Date: Tue, 19 Oct 2010 20:32:50 +0200 [thread overview]
Message-ID: <201010192032.50484.albin.kauffmann@gmail.com> (raw)
In-Reply-To: <259225.84971.qm@web25402.mail.ukl.yahoo.com>
On Monday 11 October 2010 11:57:14 fabio tirapelle wrote:
> Hi
>
> After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge
> WinTV-HVR-1120 (sometimes) doesn't work correctly.
> I get random the following errors:
>
> [ 53.216153] DVB: registering new adapter (saa7133[0])
> [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN
> DVB-T)... [ 53.840013] tda10048_firmware_upload: waiting for firmware
> upload (dvb-fe-tda10048-1.0.fw)...
> [ 53.840019] saa7134 0000:01:06.0: firmware: requesting
> dvb-fe-tda10048-1.0.fw [ 53.880505] tda10048_firmware_upload: firmware
> read 24878 bytes. [ 53.880509] tda10048_firmware_upload: firmware
> uploading
> [ 58.280136] tda10048_firmware_upload: firmware uploaded
> [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on line
> 264 [ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> i2c_transfer returned: -5
> [ 59.420157] tda18271_toggle_output: error -5 on line 47
> [ 91.004019] Clocksource tsc unstable (delta = -295012684 ns)
> [ 256.293639] eth0: link up.
> [ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 263.523498] eth0: link down.
> [ 265.258740] eth0: link up.
> [ 266.460026] eth0: no IPv6 routers present
> [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 9869.636178] tda18271_init: error -5 on line 826
> [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 9872.636232] tda18271_toggle_output: error -5 on line 47
> [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 9998.240178] tda18271_init: error -5 on line 826
> [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [10001.240190] tda18271_toggle_output: error -5 on line 47
Hi,
I have the same HVR-1120 TV card and I get the same kind of errors happening
on my ArchLinux installation (kernel 2.6.35). However, these errors are not
occuring after all boots. Indeed, I can watch TV (DVB-T) with no problem after
3/4 of my reboots. Is your problem happening at all time ?
I've started to recompile my own kernel with the v4l module from the hg
repository. I'll tell you if it improves the behavior.
I don't use Ubuntu on my desktop computer but, as far as you are concerned,
you could first try to update your installation to the last Ubuntu 10.10 or to
compile the last Linux kernel. And tell us if it improves something ;)
Cheers,
--
Albin Kauffmann
Open Wide - Architecte Open Source
next prev parent reply other threads:[~2010-10-19 18:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-11 9:57 Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 fabio tirapelle
2010-10-19 18:32 ` Albin Kauffmann [this message]
2010-10-19 19:56 ` fabio tirapelle
2010-10-24 14:27 ` Albin Kauffmann
2011-01-11 13:57 ` mmanzato
2011-01-15 17:37 ` Albin Kauffmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201010192032.50484.albin.kauffmann@gmail.com \
--to=albin.kauffmann@gmail.com \
--cc=ftirapelle@yahoo.it \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox