* Hauppauge WinTV PVR USB2 problems
@ 2010-10-20 4:04 Jim Peters
0 siblings, 0 replies; only message in thread
From: Jim Peters @ 2010-10-20 4:04 UTC (permalink / raw)
To: linux-media
I have 4 of these tuners, 3 of them are the 24xx series and 1 is a 29xx
series, at one time they all worked great and I am not sure what happened to
cause this but at some point the 29xx tuner started outputting black and white
video. At first I suspected a hardware failure and thought maybe it was in the
analog tuner part of the card so I switched it over to using the composite
side but this didn't help. As a last resort to chalking it up as a failed
piece of hardware I tried it on a windows machine and it works fine there so I
am under the impression that this must be a driver/firmware issue. Since my
other 3 tuners don't have a problem I assume that there must be some part of
the driver/firmware that only affects the 29xx series cards and the problem lies
within this, I have no idea where to look for a solution, any help would be
appreciated.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-10-20 4:04 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-10-20 4:04 Hauppauge WinTV PVR USB2 problems Jim Peters
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox