Hauppauge WinTV-HVR-1120 on Unbuntu 10.04

public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed

* Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
@ 2010-10-11  9:57 fabio tirapelle
  2010-10-19 18:32 ` Albin Kauffmann
  0 siblings, 1 reply; 6+ messages in thread
From: fabio tirapelle @ 2010-10-11  9:57 UTC (permalink / raw)
  To: linux-media

Hi

After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge WinTV-HVR-1120 
(sometimes) doesn't work correctly.
I get random the following errors:

[   53.216153] DVB: registering new adapter (saa7133[0])
[   53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)...
[   53.840013] tda10048_firmware_upload: waiting for firmware upload 
(dvb-fe-tda10048-1.0.fw)...
[   53.840019] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw
[   53.880505] tda10048_firmware_upload: firmware read 24878 bytes.
[   53.880509] tda10048_firmware_upload: firmware uploading
[   58.280136] tda10048_firmware_upload: firmware uploaded
[   59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer 
returned: -5
[   59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on line 264
[   59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer 
returned: -5
[   59.420157] tda18271_toggle_output: error -5 on line 47
[   91.004019] Clocksource tsc unstable (delta = -295012684 ns)
[  256.293639] eth0: link up.
[  256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  263.523498] eth0: link down.
[  265.258740] eth0: link up.
[  266.460026] eth0: no IPv6 routers present
[ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer 
returned: -5
[ 9869.636178] tda18271_init: error -5 on line 826
[ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer 
returned: -5
[ 9872.636232] tda18271_toggle_output: error -5 on line 47
[ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer 
returned: -5
[ 9998.240178] tda18271_init: error -5 on line 826
[10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer 
returned: -5
[10001.240190] tda18271_toggle_output: error -5 on line 47



Any ideas?
Thanks



      

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
  2010-10-11  9:57 Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 fabio tirapelle
@ 2010-10-19 18:32 ` Albin Kauffmann
  2010-10-19 19:56   ` fabio tirapelle
  0 siblings, 1 reply; 6+ messages in thread
From: Albin Kauffmann @ 2010-10-19 18:32 UTC (permalink / raw)
  To: fabio tirapelle; +Cc: linux-media

On Monday 11 October 2010 11:57:14 fabio tirapelle wrote:
> Hi
> 
> After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge
> WinTV-HVR-1120 (sometimes) doesn't work correctly.
> I get random the following errors:
> 
> [   53.216153] DVB: registering new adapter (saa7133[0])
> [   53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN
> DVB-T)... [   53.840013] tda10048_firmware_upload: waiting for firmware
> upload (dvb-fe-tda10048-1.0.fw)...
> [   53.840019] saa7134 0000:01:06.0: firmware: requesting
> dvb-fe-tda10048-1.0.fw [   53.880505] tda10048_firmware_upload: firmware
> read 24878 bytes. [   53.880509] tda10048_firmware_upload: firmware
> uploading
> [   58.280136] tda10048_firmware_upload: firmware uploaded
> [   59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [   59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on line
> 264 [   59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> i2c_transfer returned: -5
> [   59.420157] tda18271_toggle_output: error -5 on line 47
> [   91.004019] Clocksource tsc unstable (delta = -295012684 ns)
> [  256.293639] eth0: link up.
> [  256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [  263.523498] eth0: link down.
> [  265.258740] eth0: link up.
> [  266.460026] eth0: no IPv6 routers present
> [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 9869.636178] tda18271_init: error -5 on line 826
> [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 9872.636232] tda18271_toggle_output: error -5 on line 47
> [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 9998.240178] tda18271_init: error -5 on line 826
> [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [10001.240190] tda18271_toggle_output: error -5 on line 47

Hi,

I have the same HVR-1120 TV card and I get the same kind of errors happening 
on my ArchLinux installation (kernel 2.6.35). However, these errors are not 
occuring after all boots. Indeed, I can watch TV (DVB-T) with no problem after 
3/4 of my reboots. Is your problem happening at all time ?

I've started to recompile my own kernel with the v4l module from the hg 
repository. I'll tell you if it improves the behavior.

I don't use Ubuntu on my desktop computer but, as far as you are concerned, 
you could first try to update your installation to the last Ubuntu 10.10 or to 
compile the last Linux kernel. And tell us if it improves something ;)

Cheers,

-- 
Albin Kauffmann
Open Wide - Architecte Open Source

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
  2010-10-19 18:32 ` Albin Kauffmann
@ 2010-10-19 19:56   ` fabio tirapelle
  2010-10-24 14:27     ` Albin Kauffmann
  0 siblings, 1 reply; 6+ messages in thread
From: fabio tirapelle @ 2010-10-19 19:56 UTC (permalink / raw)
  To: Albin Kauffmann; +Cc: linux-media

Hi 

Yes, the same behaviour: random (after 3-4 boots) the card works correctly.

The WinTV did work correctly with ubuntu 9.10. In Ubuntu 9.10 the 
package linux-firmware-nonfree didn't include the dvb-fe-tda10048-1.0.fw. I 
remember that Ubuntu 9.10 used for my card the dvb-fe-tda10046.fw. 

Now, Ubuntu 10.04 loads for my card the dvb-fe-tda10048-1.0.fw
Its seems that with the 9.10 version, the card is recognized as WinTV-HVR-1100 
or 1110 and now as WinTV-HVR-1120. 


I wait until you recompile the kernel  with the v4l. Please tell me if this 
solves
the problem

Thanks



----- Messaggio originale -----
> Da: Albin Kauffmann <albin.kauffmann@gmail.com>
> A: fabio tirapelle <ftirapelle@yahoo.it>
> Cc: linux-media@vger.kernel.org
> Inviato: Mar 19 ottobre 2010, 20:32:50
> Oggetto: Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
> 
> On Monday 11 October 2010 11:57:14 fabio tirapelle wrote:
> > Hi
> > 
> > After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge
> >  WinTV-HVR-1120 (sometimes) doesn't work correctly.
> > I get random the  following errors:
> > 
> > [   53.216153] DVB: registering new  adapter (saa7133[0])
> > [   53.216156] DVB: registering adapter 2  frontend 0 (NXP TDA10048HN
> > DVB-T)... [   53.840013]  tda10048_firmware_upload: waiting for firmware
> > upload  (dvb-fe-tda10048-1.0.fw)...
> > [   53.840019] saa7134 0000:01:06.0:  firmware: requesting
> > dvb-fe-tda10048-1.0.fw [   53.880505]  tda10048_firmware_upload: firmware
> > read 24878 bytes. [   53.880509]  tda10048_firmware_upload: firmware
> > uploading
> > [   58.280136]  tda10048_firmware_upload: firmware uploaded
> > [   59.024537]  tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> > returned:  -5
> > [   59.024541] tda18271c2_rf_tracking_filters_correction: error  -5 on line
> > 264 [   59.420153] tda18271_write_regs: ERROR: idx =  0x5, len = 1,
> > i2c_transfer returned: -5
> > [   59.420157]  tda18271_toggle_output: error -5 on line 47
> > [   91.004019]  Clocksource tsc unstable (delta = -295012684 ns)
> > [  256.293639]  eth0: link up.
> > [  256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link  becomes ready
> > [  263.523498] eth0: link down.
> > [   265.258740] eth0: link up.
> > [  266.460026] eth0: no IPv6 routers  present
> > [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1,  i2c_transfer
> > returned: -5
> > [ 9869.636178] tda18271_init: error -5  on line 826
> > [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len =  1, i2c_transfer
> > returned: -5
> > [ 9872.636232]  tda18271_toggle_output: error -5 on line 47
> > [ 9998.240167]  tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> > returned:  -5
> > [ 9998.240178] tda18271_init: error -5 on line 826
> >  [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1,  
i2c_transfer
> > returned: -5
> > [10001.240190] tda18271_toggle_output:  error -5 on line 47
> 
> Hi,
> 
> I have the same HVR-1120 TV card and I get  the same kind of errors happening 
> on my ArchLinux installation (kernel  2.6.35). However, these errors are not 
> occuring after all boots. Indeed, I  can watch TV (DVB-T) with no problem after 
>
> 3/4 of my reboots. Is your  problem happening at all time ?
> 
> I've started to recompile my own kernel  with the v4l module from the hg 
> repository. I'll tell you if it improves the  behavior.
> 
> I don't use Ubuntu on my desktop computer but, as far as you  are concerned, 
> you could first try to update your installation to the last  Ubuntu 10.10 or to 
>
> compile the last Linux kernel. And tell us if it improves  something ;)
> 
> Cheers,
> 
> -- 
> Albin Kauffmann
> Open Wide -  Architecte Open Source
> --
> To unsubscribe from this list: send the line  "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More  majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


      

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
  2010-10-19 19:56   ` fabio tirapelle
@ 2010-10-24 14:27     ` Albin Kauffmann
  2011-01-11 13:57       ` mmanzato
  0 siblings, 1 reply; 6+ messages in thread
From: Albin Kauffmann @ 2010-10-24 14:27 UTC (permalink / raw)
  To: fabio tirapelle, Sasha Sirotkin; +Cc: linux-media

On Tuesday 19 October 2010 21:56:51 fabio tirapelle wrote:
> The WinTV did work correctly with ubuntu 9.10. In Ubuntu 9.10 the
> package linux-firmware-nonfree didn't include the dvb-fe-tda10048-1.0.fw. I
> remember that Ubuntu 9.10 used for my card the dvb-fe-tda10046.fw.
> 
> Now, Ubuntu 10.04 loads for my card the dvb-fe-tda10048-1.0.fw
> Its seems that with the 9.10 version, the card is recognized as
> WinTV-HVR-1100 or 1110 and now as WinTV-HVR-1120.

This is actually strange because the Wiki states that the card is using an 
"NXP TDA10048 digital demodulator" 
(http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1120). Anyway, this may 
worth the cost to build an old kernel to see if this effectively works well ;)

> I wait until you recompile the kernel  with the v4l. Please tell me if this
> solves the problem

I have tried several scenarios :
 - the last 2.6.36 Linux kernel
 - the kernel 2.6.35 with sources from the HG repository 
(http://linuxtv.org/hg/v4l-dvb/)
 - the media tree git (http://git.linuxtv.org/media_tree.git)

In all situations, I get the same behaviour. After a random number of reboots, 
the TV (DVB-T) is not working and I get this message displayed in loop in 
`dmesg`:

tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer 
returned: -5
tda18271_init: [1-0060|M] error -5 on line 830
tda18271_tune: [1-0060|M] error -5 on line 908
tda18271_set_params: [1-0060|M] error -5 on line 989

Also, even when the TV is working, I get these error messages in `dmesg:

[...]
tda829x 1-004b: type set to tda8290
tda18271 1-0060: attaching existing instance
DVB: registering new adapter (saa7133[0])
DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
tda10048_firmware_upload: waiting for firmware upload (dvb-fe-
tda10048-1.0.fw)...
tda10048_firmware_upload: firmware read 24878 bytes.
tda10048_firmware_upload: firmware uploading
tda18271_write_regs: [1-0060|M] ERROR: idx = 0x13, len = 1, i2c_transfer 
returned: -5
tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer 
returned: -5
tda18271_set_analog_params: [1-0060|M] error -5 on line 1045
tda18271_write_regs: [1-0060|M] ERROR: idx = 0x13, len = 1, i2c_transfer 
returned: -5
tda10048_firmware_upload: firmware uploaded
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xeb200000 irq 20 registered as card -1
tda18271_read_regs: [1-0060|M] ERROR: i2c_transfer returned: -5
tda18271_ir_cal_init: [1-0060|M] error -5 on line 811
tda18271_init: [1-0060|M] error -5 on line 835
tda18271_tune: [1-0060|M] error -5 on line 908
tda18271_set_analog_params: [1-0060|M] error -5 on line 1045


I may take a look at sources to understand what is happening. So, if someone 
have an idea, please tell me ;)

Thanks,

-- 
Albin Kauffmann

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
  2010-10-24 14:27     ` Albin Kauffmann
@ 2011-01-11 13:57       ` mmanzato
  2011-01-15 17:37         ` Albin Kauffmann
  0 siblings, 1 reply; 6+ messages in thread
From: mmanzato @ 2011-01-11 13:57 UTC (permalink / raw)
  To: linux-media

Same behaviour here. I'm with Mythbuntu 10.10.

TDA10048 firwmare is found in the linux-firmware-nonfree Ubuntu package. From
what I can see in dmesg it is loaded correctly.

http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1120 says that support
for this card seems to be broken in recent Linux kernels (does that mean in
recent V4L drivers?)


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
  2011-01-11 13:57       ` mmanzato
@ 2011-01-15 17:37         ` Albin Kauffmann
  0 siblings, 0 replies; 6+ messages in thread
From: Albin Kauffmann @ 2011-01-15 17:37 UTC (permalink / raw)
  To: mmanzato; +Cc: linux-media

On Tuesday 11 January 2011 14:57:43 mmanzato wrote:
> Same behaviour here. I'm with Mythbuntu 10.10.
> 
> TDA10048 firwmare is found in the linux-firmware-nonfree Ubuntu package.
> From what I can see in dmesg it is loaded correctly.
> 
> http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1120 says that
> support for this card seems to be broken in recent Linux kernels (does
> that mean in recent V4L drivers?)

Yes. As far as I understand, Linux releases include a stable snapshot of V4L 
and both seem broken :(

-- 
Albin Kauffmann
Open Wide - Architecte Open Source

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2011-01-15 17:37 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-10-11  9:57 Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 fabio tirapelle
2010-10-19 18:32 ` Albin Kauffmann
2010-10-19 19:56   ` fabio tirapelle
2010-10-24 14:27     ` Albin Kauffmann
2011-01-11 13:57       ` mmanzato
2011-01-15 17:37         ` Albin Kauffmann

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox