From: Jean-Francois Moine <moinejf@free.fr>
To: Linux Media Mailing List <linux-media@vger.kernel.org>,
Mauro Carvalho Chehab <mchehab@redhat.com>
Subject: [PATCH 5/6] gspca - sonixj: Add the bit definitions of the bridge reg 0x01 and 0x17
Date: Mon, 13 Dec 2010 14:04:09 +0100 [thread overview]
Message-ID: <20101213140409.7e3bc5ab@tele> (raw)
Signed-off-by: Jean-François Moine <moinejf@free.fr>
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 9b7e28a..4c10324 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -100,6 +100,19 @@ enum sensors {
/* device flags */
#define PDN_INV 1 /* inverse pin S_PWR_DN / sn_xxx tables */
+/* sn9c1xx definitions */
+/* register 0x01 */
+#define S_PWR_DN 0x01 /* sensor power down */
+#define S_PDN_INV 0x02 /* inverse pin S_PWR_DN */
+#define V_TX_EN 0x04 /* video transfer enable */
+#define LED 0x08 /* output to pin LED */
+#define SCL_SEL_OD 0x20 /* open-drain mode */
+#define SYS_SEL_48M 0x40 /* system clock 0: 24MHz, 1: 48MHz */
+/* register 0x17 */
+#define MCK_SIZE_MASK 0x1f /* sensor master clock */
+#define SEN_CLK_EN 0x20 /* enable sensor clock */
+#define DEF_EN 0x80 /* defect pixel by 0: soft, 1: hard */
+
/* V4L2 controls supported by the driver */
static void setbrightness(struct gspca_dev *gspca_dev);
static void setcontrast(struct gspca_dev *gspca_dev);
--
1.7.2.3
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
next reply other threads:[~2010-12-13 13:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-13 13:04 Jean-Francois Moine [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-12-14 19:16 [PATCH 5/6] gspca - sonixj: Add the bit definitions of the bridge reg 0x01 and 0x17 Jean-François Moine
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101213140409.7e3bc5ab@tele \
--to=moinejf@free.fr \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox