From: "Jean-François Moine" <moinejf@free.fr>
To: Linux Media Mailing List <linux-media@vger.kernel.org>,
Mauro Carvalho Chehab <mchehab@redhat.com>
Subject: [PATCH 1/6] gspca - sonixj: Move bridge init to sd start
Date: Tue, 14 Dec 2010 20:14:10 +0100 [thread overview]
Message-ID: <20101214201410.09dc1cb9@tele> (raw)
Signed-off-by: Jean-François Moine <moinejf@free.fr>
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 2229847..4660cbe 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -1755,141 +1755,6 @@ static void po2030n_probe(struct gspca_dev *gspca_dev)
}
}
-static void bridge_init(struct gspca_dev *gspca_dev,
- const u8 *sn9c1xx)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- u8 reg0102[2];
- const u8 *reg9a;
- static const u8 reg9a_def[] =
- {0x00, 0x40, 0x20, 0x00, 0x00, 0x00};
- static const u8 reg9a_spec[] =
- {0x00, 0x40, 0x38, 0x30, 0x00, 0x20};
- static const u8 regd4[] = {0x60, 0x00, 0x00};
-
- /* sensor clock already enabled in sd_init */
- /* reg_w1(gspca_dev, 0xf1, 0x00); */
- reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
-
- /* configure gpio */
- reg0102[0] = sn9c1xx[1];
- reg0102[1] = sn9c1xx[2];
- if (gspca_dev->audio)
- reg0102[1] |= 0x04; /* keep the audio connection */
- reg_w(gspca_dev, 0x01, reg0102, 2);
- reg_w(gspca_dev, 0x08, &sn9c1xx[8], 2);
- reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);
- switch (sd->sensor) {
- case SENSOR_GC0307:
- case SENSOR_OV7660:
- case SENSOR_PO1030:
- case SENSOR_PO2030N:
- case SENSOR_SOI768:
- case SENSOR_SP80708:
- reg9a = reg9a_spec;
- break;
- default:
- reg9a = reg9a_def;
- break;
- }
- reg_w(gspca_dev, 0x9a, reg9a, 6);
-
- reg_w(gspca_dev, 0xd4, regd4, sizeof regd4);
-
- reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
-
- switch (sd->sensor) {
- case SENSOR_ADCM1700:
- reg_w1(gspca_dev, 0x01, 0x43);
- reg_w1(gspca_dev, 0x17, 0x62);
- reg_w1(gspca_dev, 0x01, 0x42);
- reg_w1(gspca_dev, 0x01, 0x42);
- break;
- case SENSOR_GC0307:
- msleep(50);
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0x22);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- msleep(50);
- break;
- case SENSOR_MI0360B:
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0x60);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- break;
- case SENSOR_MT9V111:
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0x61);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- break;
- case SENSOR_OM6802:
- msleep(10);
- reg_w1(gspca_dev, 0x02, 0x73);
- reg_w1(gspca_dev, 0x17, 0x60);
- reg_w1(gspca_dev, 0x01, 0x22);
- msleep(100);
- reg_w1(gspca_dev, 0x01, 0x62);
- reg_w1(gspca_dev, 0x17, 0x64);
- reg_w1(gspca_dev, 0x17, 0x64);
- reg_w1(gspca_dev, 0x01, 0x42);
- msleep(10);
- reg_w1(gspca_dev, 0x01, 0x42);
- i2c_w8(gspca_dev, om6802_init0[0]);
- i2c_w8(gspca_dev, om6802_init0[1]);
- msleep(15);
- reg_w1(gspca_dev, 0x02, 0x71);
- msleep(150);
- break;
- case SENSOR_OV7630:
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0xe2);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- break;
- case SENSOR_OV7648:
- reg_w1(gspca_dev, 0x01, 0x63);
- reg_w1(gspca_dev, 0x17, 0x20);
- reg_w1(gspca_dev, 0x01, 0x62);
- reg_w1(gspca_dev, 0x01, 0x42);
- break;
- case SENSOR_PO1030:
- case SENSOR_SOI768:
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0x20);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- break;
- case SENSOR_PO2030N:
- case SENSOR_OV7660:
- reg_w1(gspca_dev, 0x01, 0x63);
- reg_w1(gspca_dev, 0x17, 0x20);
- reg_w1(gspca_dev, 0x01, 0x62);
- reg_w1(gspca_dev, 0x01, 0x42);
- break;
- case SENSOR_SP80708:
- reg_w1(gspca_dev, 0x01, 0x63);
- reg_w1(gspca_dev, 0x17, 0x20);
- reg_w1(gspca_dev, 0x01, 0x62);
- reg_w1(gspca_dev, 0x01, 0x42);
- msleep(100);
- reg_w1(gspca_dev, 0x02, 0x62);
- break;
- default:
-/* case SENSOR_HV7131R: */
-/* case SENSOR_MI0360: */
-/* case SENSOR_MO4000: */
- reg_w1(gspca_dev, 0x01, 0x43);
- reg_w1(gspca_dev, 0x17, 0x61);
- reg_w1(gspca_dev, 0x01, 0x42);
- if (sd->sensor == SENSOR_HV7131R)
- hv7131r_probe(gspca_dev);
- break;
- }
-}
-
/* this function is called at probe time */
static int sd_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id)
@@ -2423,10 +2288,17 @@ static int sd_start(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
int i;
+ u8 reg0102[2];
+ const u8 *reg9a;
u8 reg1, reg17;
const u8 *sn9c1xx;
const u8 (*init)[8];
int mode;
+ static const u8 reg9a_def[] =
+ {0x00, 0x40, 0x20, 0x00, 0x00, 0x00};
+ static const u8 reg9a_spec[] =
+ {0x00, 0x40, 0x38, 0x30, 0x00, 0x20};
+ static const u8 regd4[] = {0x60, 0x00, 0x00};
static const u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f };
static const u8 CA[] = { 0x28, 0xd8, 0x14, 0xec };
static const u8 CA_adcm1700[] =
@@ -2448,7 +2320,128 @@ static int sd_start(struct gspca_dev *gspca_dev)
/* initialize the bridge */
sn9c1xx = sn_tb[sd->sensor];
- bridge_init(gspca_dev, sn9c1xx);
+
+ /* sensor clock already enabled in sd_init */
+ /* reg_w1(gspca_dev, 0xf1, 0x00); */
+ reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
+
+ /* configure gpio */
+ reg0102[0] = sn9c1xx[1];
+ reg0102[1] = sn9c1xx[2];
+ if (gspca_dev->audio)
+ reg0102[1] |= 0x04; /* keep the audio connection */
+ reg_w(gspca_dev, 0x01, reg0102, 2);
+ reg_w(gspca_dev, 0x08, &sn9c1xx[8], 2);
+ reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);
+ switch (sd->sensor) {
+ case SENSOR_GC0307:
+ case SENSOR_OV7660:
+ case SENSOR_PO1030:
+ case SENSOR_PO2030N:
+ case SENSOR_SOI768:
+ case SENSOR_SP80708:
+ reg9a = reg9a_spec;
+ break;
+ default:
+ reg9a = reg9a_def;
+ break;
+ }
+ reg_w(gspca_dev, 0x9a, reg9a, 6);
+
+ reg_w(gspca_dev, 0xd4, regd4, sizeof regd4);
+
+ reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
+
+ switch (sd->sensor) {
+ case SENSOR_ADCM1700:
+ reg_w1(gspca_dev, 0x01, 0x43);
+ reg_w1(gspca_dev, 0x17, 0x62);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ break;
+ case SENSOR_GC0307:
+ msleep(50);
+ reg_w1(gspca_dev, 0x01, 0x61);
+ reg_w1(gspca_dev, 0x17, 0x22);
+ reg_w1(gspca_dev, 0x01, 0x60);
+ reg_w1(gspca_dev, 0x01, 0x40);
+ msleep(50);
+ break;
+ case SENSOR_MI0360B:
+ reg_w1(gspca_dev, 0x01, 0x61);
+ reg_w1(gspca_dev, 0x17, 0x60);
+ reg_w1(gspca_dev, 0x01, 0x60);
+ reg_w1(gspca_dev, 0x01, 0x40);
+ break;
+ case SENSOR_MT9V111:
+ reg_w1(gspca_dev, 0x01, 0x61);
+ reg_w1(gspca_dev, 0x17, 0x61);
+ reg_w1(gspca_dev, 0x01, 0x60);
+ reg_w1(gspca_dev, 0x01, 0x40);
+ break;
+ case SENSOR_OM6802:
+ msleep(10);
+ reg_w1(gspca_dev, 0x02, 0x73);
+ reg_w1(gspca_dev, 0x17, 0x60);
+ reg_w1(gspca_dev, 0x01, 0x22);
+ msleep(100);
+ reg_w1(gspca_dev, 0x01, 0x62);
+ reg_w1(gspca_dev, 0x17, 0x64);
+ reg_w1(gspca_dev, 0x17, 0x64);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ msleep(10);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ i2c_w8(gspca_dev, om6802_init0[0]);
+ i2c_w8(gspca_dev, om6802_init0[1]);
+ msleep(15);
+ reg_w1(gspca_dev, 0x02, 0x71);
+ msleep(150);
+ break;
+ case SENSOR_OV7630:
+ reg_w1(gspca_dev, 0x01, 0x61);
+ reg_w1(gspca_dev, 0x17, 0xe2);
+ reg_w1(gspca_dev, 0x01, 0x60);
+ reg_w1(gspca_dev, 0x01, 0x40);
+ break;
+ case SENSOR_OV7648:
+ reg_w1(gspca_dev, 0x01, 0x63);
+ reg_w1(gspca_dev, 0x17, 0x20);
+ reg_w1(gspca_dev, 0x01, 0x62);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ break;
+ case SENSOR_PO1030:
+ case SENSOR_SOI768:
+ reg_w1(gspca_dev, 0x01, 0x61);
+ reg_w1(gspca_dev, 0x17, 0x20);
+ reg_w1(gspca_dev, 0x01, 0x60);
+ reg_w1(gspca_dev, 0x01, 0x40);
+ break;
+ case SENSOR_PO2030N:
+ case SENSOR_OV7660:
+ reg_w1(gspca_dev, 0x01, 0x63);
+ reg_w1(gspca_dev, 0x17, 0x20);
+ reg_w1(gspca_dev, 0x01, 0x62);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ break;
+ case SENSOR_SP80708:
+ reg_w1(gspca_dev, 0x01, 0x63);
+ reg_w1(gspca_dev, 0x17, 0x20);
+ reg_w1(gspca_dev, 0x01, 0x62);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ msleep(100);
+ reg_w1(gspca_dev, 0x02, 0x62);
+ break;
+ default:
+/* case SENSOR_HV7131R: */
+/* case SENSOR_MI0360: */
+/* case SENSOR_MO4000: */
+ reg_w1(gspca_dev, 0x01, 0x43);
+ reg_w1(gspca_dev, 0x17, 0x61);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ if (sd->sensor == SENSOR_HV7131R)
+ hv7131r_probe(gspca_dev);
+ break;
+ }
/* initialize the sensor */
i2c_w_seq(gspca_dev, sensor_init[sd->sensor]);
--
1.7.2.3
next reply other threads:[~2010-12-14 19:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-14 19:14 Jean-François Moine [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-12-13 13:02 [PATCH 1/6] gspca - sonixj: Move bridge init to sd start Jean-Francois Moine
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101214201410.09dc1cb9@tele \
--to=moinejf@free.fr \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).