[PATCH 1/4] [media] bttv-input: Add a note about PV951 RC

[Mauro Carvalho Chehab <mchehab@redhat.com>]

When comparing lirc-i2c and ir-kbd-i2c/bttv-input logic, a difference
was noticed. As lirc-i2c will be removed soon, store the difference on
a comment inside ir-kbd-i2c, in order to preserve the knowledge we
have about that remote controller.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index 7f48306..97793b9 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -354,6 +354,18 @@ static int get_key_pv951(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 		return 0;
 	dprintk(KERN_INFO DEVNAME ": key %02x\n", b);
 
+	/*
+	 * NOTE:
+	 * lirc_i2c maps the pv951 code as:
+	 *	addr = 0x61D6
+	 * 	cmd = bit_reverse (b)
+	 * So, it seems that this device uses NEC extended
+	 * I decided to not fix the table, due to two reasons:
+	 * 	1) Without the actual device, this is only a guess;
+	 * 	2) As the addr is not reported via I2C, nor can be changed,
+	 * 	   the device is bound to the vendor-provided RC.
+	 */
+
 	*ir_key = b;
 	*ir_raw = b;
 	return 1;
-- 
1.7.3.4