public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: unlisted-recipients:; (no To-header on input)@casper.infradead.org
Cc: Linux Media Mailing List <linux-media@vger.kernel.org>
Subject: [PATCH 2/5] [media] cx231xx: Use a generic check for TUNER_XC5000
Date: Sun, 13 Feb 2011 15:28:54 -0200	[thread overview]
Message-ID: <20110213152854.22573ce8@pedra> (raw)
In-Reply-To: <cover.1297617986.git.mchehab@redhat.com>

The check for xc5000 assumes that the tuner will always
be using the same bus and will have the same address.
As those are configurable via dev->board, it should use,
instead, the values defined there.

Also, a similar type of test will be needed by other
tuners (for example, for TUNER_XC2028)

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/cx231xx/cx231xx-i2c.c b/drivers/media/video/cx231xx/cx231xx-i2c.c
index 8356706..925f3a0 100644
--- a/drivers/media/video/cx231xx/cx231xx-i2c.c
+++ b/drivers/media/video/cx231xx/cx231xx-i2c.c
@@ -54,6 +54,21 @@ do {							\
       } 						\
 } while (0)
 
+static inline bool is_tuner(struct cx231xx *dev, struct cx231xx_i2c *bus,
+			const struct i2c_msg *msg, int tuner_type)
+{
+	if (bus->nr != dev->board.tuner_i2c_master)
+		return false;
+
+	if (msg->addr != dev->board.tuner_addr)
+		return false;
+
+	if (dev->tuner_type != tuner_type)
+		return false;
+
+	return true;
+}
+
 /*
  * cx231xx_i2c_send_bytes()
  */
@@ -71,9 +86,7 @@ int cx231xx_i2c_send_bytes(struct i2c_adapter *i2c_adap,
 	u16 saddr = 0;
 	u8 need_gpio = 0;
 
-	if ((bus->nr == 1) && (msg->addr == 0x61)
-	    && (dev->tuner_type == TUNER_XC5000)) {
-
+	if (is_tuner(dev, bus, msg, TUNER_XC5000)) {
 		size = msg->len;
 
 		if (size == 2) {	/* register write sub addr */
@@ -180,9 +193,7 @@ static int cx231xx_i2c_recv_bytes(struct i2c_adapter *i2c_adap,
 	u16 saddr = 0;
 	u8 need_gpio = 0;
 
-	if ((bus->nr == 1) && (msg->addr == 0x61)
-	    && dev->tuner_type == TUNER_XC5000) {
-
+	if (is_tuner(dev, bus, msg, TUNER_XC5000)) {
 		if (msg->len == 2)
 			saddr = msg->buf[0] << 8 | msg->buf[1];
 		else if (msg->len == 1)
@@ -274,9 +285,7 @@ static int cx231xx_i2c_recv_bytes_with_saddr(struct i2c_adapter *i2c_adap,
 	else if (msg1->len == 1)
 		saddr = msg1->buf[0];
 
-	if ((bus->nr == 1) && (msg2->addr == 0x61)
-	    && dev->tuner_type == TUNER_XC5000) {
-
+	if (is_tuner(dev, bus, msg2, TUNER_XC5000)) {
 		if ((msg2->len < 16)) {
 
 			dprintk1(1,
@@ -454,8 +463,8 @@ static char *i2c_devs[128] = {
 	[0x32 >> 1] = "GeminiIII",
 	[0x02 >> 1] = "Aquarius",
 	[0xa0 >> 1] = "eeprom",
-	[0xc0 >> 1] = "tuner/XC3028",
-	[0xc2 >> 1] = "tuner/XC5000",
+	[0xc0 >> 1] = "tuner",
+	[0xc2 >> 1] = "tuner",
 };
 
 /*
-- 
1.7.1



  parent reply	other threads:[~2011-02-13 17:32 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1297617986.git.mchehab@redhat.com>
2011-02-13 17:28 ` [PATCH 1/5] [media] cx231xx: Simplify interface checking logic at probe Mauro Carvalho Chehab
2011-02-13 17:28 ` Mauro Carvalho Chehab [this message]
2011-02-13 17:28 ` [PATCH 4/5] [media] cx231xx: Allow some boards to not use I2C port 3 Mauro Carvalho Chehab
2011-02-13 17:28 ` [PATCH 3/5] [media] cx231xx: Use parameters to describe some board variants Mauro Carvalho Chehab
2011-02-13 17:28 ` [PATCH 5/5] [media] cx231xx: Add support for PV Xcapture USB Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110213152854.22573ce8@pedra \
    --to=mchehab@redhat.com \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox