From: Steffen Barszus <steffenbpunkt@googlemail.com>
To: linux-media@vger.kernel.org
Subject: Skystar 2 2.6 broken in kernel 2.6.38
Date: Sat, 2 Apr 2011 21:30:53 +0200 [thread overview]
Message-ID: <20110402213053.716d0de7@grobi> (raw)
Hi
I just installed natty and found that one of the drivers i use is
broken. Is this a known issue ?
[ 6.115925] ------------[ cut here ]------------
[ 6.115931] WARNING: at /build/buildd/linux-2.6.38/fs/proc/generic.c:323 __xlate_proc_name+0xbb/0xd0()
[ 6.115933] Hardware name: EP45T-UD3LR
[ 6.115934] name 'Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver'
[ 6.115935] Modules linked in: videobuf_dvb(+) b2c2_flexcop_pci(+) videobuf_core joydev v4l2_common b2c2_flexcop snd(+) dvb_core cx24123 cx24113 videodev btcx_risc soundcore s5h1420 tveeprom snd_page_alloc serio_raw sunrpc(+) lp parport hid_gyration usbhid hid r8169 pata_jmicron
[ 6.115953] Pid: 518, comm: modprobe Tainted: P 2.6.38-7-generic #39-Ubuntu
[ 6.115955] Call Trace:
[ 6.115959] [<c104f912>] ? warn_slowpath_common+0x72/0xa0
[ 6.115962] [<c1174a5b>] ? __xlate_proc_name+0xbb/0xd0
[ 6.115964] [<c1174a5b>] ? __xlate_proc_name+0xbb/0xd0
[ 6.115967] [<c104f9e3>] ? warn_slowpath_fmt+0x33/0x40
[ 6.115970] [<c1174a5b>] ? __xlate_proc_name+0xbb/0xd0
[ 6.115973] [<c1175101>] ? __proc_create+0x61/0x110
[ 6.115975] [<c11754b6>] ? proc_mkdir_mode+0x26/0x60
[ 6.115978] [<c1175504>] ? proc_mkdir+0x14/0x20
[ 6.115981] [<c10b2fbb>] ? register_handler_proc+0xeb/0x110
[ 6.115984] [<c10b0e37>] ? __setup_irq+0x1a7/0x2f0
[ 6.115987] [<c111a7ad>] ? kmem_cache_alloc_trace+0xdd/0x100
[ 6.115989] [<c10b0ff9>] ? request_threaded_irq+0x79/0x120
[ 6.115992] [<c10b0ff9>] ? request_threaded_irq+0x79/0x120
[ 6.116012] [<f18d6270>] ? flexcop_pci_isr+0x0/0x140 [b2c2_flexcop_pci]
[ 6.116015] [<c10b103c>] ? request_threaded_irq+0xbc/0x120
[ 6.116018] [<c127f5ce>] ? pci_iomap+0x9e/0xb0
[ 6.116021] [<f18d6214>] ? flexcop_pci_init+0xc4/0x120 [b2c2_flexcop_pci]
[ 6.116025] [<f18d6455>] ? flexcop_pci_probe+0xa5/0x1d0 [b2c2_flexcop_pci]
[ 6.116028] [<c1291d37>] ? local_pci_probe+0x47/0xb0
[ 6.116030] [<c12931b8>] ? pci_device_probe+0x68/0x90
[ 6.116034] [<c1333b0d>] ? really_probe+0x4d/0x150
[ 6.116036] [<c133bd7b>] ? pm_runtime_barrier+0x4b/0xb0
[ 6.116039] [<c1333dac>] ? driver_probe_device+0x3c/0x60
[ 6.116041] [<c1333e51>] ? __driver_attach+0x81/0x90
[ 6.116043] [<c1333dd0>] ? __driver_attach+0x0/0x90
[ 6.116046] [<c1332f08>] ? bus_for_each_dev+0x48/0x70
[ 6.116048] [<c1292bc0>] ? pci_device_remove+0x0/0xf0
[ 6.116050] [<c13339be>] ? driver_attach+0x1e/0x20
[ 6.116052] [<c1333dd0>] ? __driver_attach+0x0/0x90
[ 6.116054] [<c13335d8>] ? bus_add_driver+0xb8/0x250
[ 6.116057] [<c1292bc0>] ? pci_device_remove+0x0/0xf0
[ 6.116059] [<c1334096>] ? driver_register+0x66/0x110
[ 6.116062] [<c12922d5>] ? __pci_register_driver+0x45/0xb0
[ 6.116065] [<ef8aa017>] ? flexcop_pci_module_init+0x17/0x1000 [b2c2_flexcop_pci]
[ 6.116068] [<c1001255>] ? do_one_initcall+0x35/0x170
[ 6.116070] [<ef8aa000>] ? flexcop_pci_module_init+0x0/0x1000 [b2c2_flexcop_pci]
[ 6.116074] [<c108888b>] ? sys_init_module+0xdb/0x230
[ 6.116077] [<c1509904>] ? syscall_call+0x7/0xb
[ 6.116079] ---[ end trace ea1b091448ed01ea ]---
next reply other threads:[~2011-04-02 19:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-02 19:30 Steffen Barszus [this message]
2011-04-03 15:41 ` Skystar 2 2.6 broken in kernel 2.6.38 Patrick Boettcher
2011-04-03 18:15 ` Steffen Barszus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110402213053.716d0de7@grobi \
--to=steffenbpunkt@googlemail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox