From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-fx0-f46.google.com ([209.85.161.46]:41198 "EHLO mail-fx0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753183Ab1DETHQ convert rfc822-to-8bit (ORCPT ); Tue, 5 Apr 2011 15:07:16 -0400 Received: by fxm17 with SMTP id 17so491567fxm.19 for ; Tue, 05 Apr 2011 12:07:14 -0700 (PDT) Date: Tue, 5 Apr 2011 21:07:04 +0200 From: Steffen Barszus To: "Issa Gorissen" Cc: Subject: Re: TT-budget S2-3200 cannot tune on HB13E DVBS2 transponder Message-ID: <20110405210704.24555a04@grobi> In-Reply-To: <632PDek8o1744S03.1302001214@web03.cms.usa.net> References: <632PDek8o1744S03.1302001214@web03.cms.usa.net> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT List-ID: Sender: On Tue, 05 Apr 2011 13:00:14 +0200 "Issa Gorissen" wrote: > Hi, > > Eutelsat made a recent migration from DVB-S to DVB-S2 (since > 31/3/2011) on two transponders on HB13E > > - HOT BIRD 6 13° Est TP 159 Freq 11,681 Ghz DVB-S2 FEC 3/4 27500 > Msymb/s 0.2 Pilot off Polar H > > - HOT BIRD 9 13° Est TP 99 Freq 12,692 Ghz DVB-S2 FEC 3/4 27500 > Msymb/s 0.2 Pilot off Polar H > > > Before those changes, with my TT S2 3200, I was able to watch TV on > those transponders. Now, I cannot even tune on those transponders. I > have tried with scan-s2 and w_scan and the latest drivers from git. > They both find the transponders but cannot tune onto it. > > Something noteworthy is that my other card, a DuoFlex S2 can tune > fine on those transponders. > > My question is; can someone try this as well with a TT S2 3200 and > post the results ? i read something about it lately here (german!): http://www.vdr-portal.de/board16-video-disk-recorder/board85-hdtv-dvb-s2/p977938-stb0899-fec-3-4-tester-gesucht/#post977938 It says in stb0899_drv.c function: static void stb0899_set_iterations(struct stb0899_state *state) This: reg = STB0899_READ_S2REG(STB0899_S2DEMOD, MAX_ITER); STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale); stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg); should be replaced with this: reg = STB0899_READ_S2REG(STB0899_S2FEC, MAX_ITER); STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale); stb0899_write_s2reg(state, STB0899_S2FEC, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg); Basically replace STB0899_S2DEMOD with STB0899_S2FEC in this 2 lines affected. Kind Regards Steffen