* [GIT PATCHES FOR 3.2] gspca for_v3.2
@ 2011-08-12 8:37 Jean-Francois Moine
2011-09-21 20:14 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 4+ messages in thread
From: Jean-Francois Moine @ 2011-08-12 8:37 UTC (permalink / raw)
To: linux-media
The following changes since commit
9bed77ee2fb46b74782d0d9d14b92e9d07f3df6e:
[media] tuner_xc2028: Allow selection of the frequency adjustment code for XC3028 (2011-08-06 09:52:47 -0300)
are available in the git repository at:
git://linuxtv.org/jfrancois/gspca.git for_v3.2
Jean-François Moine (15):
gspca - ov519: Fix LED inversion of some ov519 webcams
gspca - sonixj: Fix the darkness of sensor om6802 in 320x240
gspca - jeilinj: Cleanup code
gspca - sonixj: Adjust the contrast control
gspca - sonixj: Increase the exposure for sensor soi768
gspca - sonixj: Cleanup source and remove useless instructions
gspca - benq: Remove the useless function sd_isoc_init
gspca - kinect: Remove the gspca_debug definition
gspca - ov534_9: Use the new control mechanism
gspca - ov534_9: New sensor ov9712 and new webcam 05a9:8065
gspca - main: Fix the isochronous transfer interval
gspca - main: Better values for V4L2_FMT_FLAG_COMPRESSED
gspca - main: Use a better altsetting for image transfer
gspca - main: Handle the xHCI error on usb_set_interface()
gspca - tp6800: New subdriver for Topro webcams
Luiz Carlos Ramos (1):
gspca - sonixj: Fix wrong register mask for sensor om6802
Documentation/video4linux/gspca.txt | 3 +
drivers/media/video/gspca/Kconfig | 9 +
drivers/media/video/gspca/Makefile | 2 +
drivers/media/video/gspca/benq.c | 15 -
drivers/media/video/gspca/gspca.c | 234 ++-
drivers/media/video/gspca/jeilinj.c | 10 +-
drivers/media/video/gspca/kinect.c | 5 -
drivers/media/video/gspca/ov519.c | 22 +-
drivers/media/video/gspca/ov534_9.c | 504 ++--
drivers/media/video/gspca/sonixj.c | 29 +-
drivers/media/video/gspca/tp6800.c | 4989 +++++++++++++++++++++++++++++++++++
11 files changed, 5430 insertions(+), 392 deletions(-)
create mode 100644 drivers/media/video/gspca/tp6800.c
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PATCHES FOR 3.2] gspca for_v3.2
2011-08-12 8:37 Jean-Francois Moine
@ 2011-09-21 20:14 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 4+ messages in thread
From: Mauro Carvalho Chehab @ 2011-09-21 20:14 UTC (permalink / raw)
To: Jean-Francois Moine; +Cc: linux-media
Em 12-08-2011 05:37, Jean-Francois Moine escreveu:
> The following changes since commit
> 9bed77ee2fb46b74782d0d9d14b92e9d07f3df6e:
>
> [media] tuner_xc2028: Allow selection of the frequency adjustment code for XC3028 (2011-08-06 09:52:47 -0300)
>
> are available in the git repository at:
> git://linuxtv.org/jfrancois/gspca.git for_v3.2
Jean-François,
The last 3 patches didn't apply. Could you please re-base them over the
current tree?
Thanks!
Mauro
>
> Jean-François Moine (15):
> gspca - ov519: Fix LED inversion of some ov519 webcams
> gspca - sonixj: Fix the darkness of sensor om6802 in 320x240
> gspca - jeilinj: Cleanup code
> gspca - sonixj: Adjust the contrast control
> gspca - sonixj: Increase the exposure for sensor soi768
> gspca - sonixj: Cleanup source and remove useless instructions
> gspca - benq: Remove the useless function sd_isoc_init
> gspca - kinect: Remove the gspca_debug definition
> gspca - ov534_9: Use the new control mechanism
> gspca - ov534_9: New sensor ov9712 and new webcam 05a9:8065
> gspca - main: Fix the isochronous transfer interval
> gspca - main: Better values for V4L2_FMT_FLAG_COMPRESSED
> gspca - main: Use a better altsetting for image transfer
> gspca - main: Handle the xHCI error on usb_set_interface()
> gspca - tp6800: New subdriver for Topro webcams
>
> Luiz Carlos Ramos (1):
> gspca - sonixj: Fix wrong register mask for sensor om6802
>
> Documentation/video4linux/gspca.txt | 3 +
> drivers/media/video/gspca/Kconfig | 9 +
> drivers/media/video/gspca/Makefile | 2 +
> drivers/media/video/gspca/benq.c | 15 -
> drivers/media/video/gspca/gspca.c | 234 ++-
> drivers/media/video/gspca/jeilinj.c | 10 +-
> drivers/media/video/gspca/kinect.c | 5 -
> drivers/media/video/gspca/ov519.c | 22 +-
> drivers/media/video/gspca/ov534_9.c | 504 ++--
> drivers/media/video/gspca/sonixj.c | 29 +-
> drivers/media/video/gspca/tp6800.c | 4989 +++++++++++++++++++++++++++++++++++
> 11 files changed, 5430 insertions(+), 392 deletions(-)
> create mode 100644 drivers/media/video/gspca/tp6800.c
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [GIT PATCHES FOR 3.2] gspca for_v3.2
@ 2011-09-23 8:37 Jean-Francois Moine
2011-09-24 3:18 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 4+ messages in thread
From: Jean-Francois Moine @ 2011-09-23 8:37 UTC (permalink / raw)
To: linux-media
Hi Mauro,
This set includes the patches:
http://patchwork.linuxtv.org/patch/7358
http://patchwork.linuxtv.org/patch/114
Cheers.
The following changes since commit e553000a14ead0e265a8aa4d241c7b3221e233e3:
[media] sr030pc30: Remove empty s_stream op (2011-09-21 12:48:45 -0300)
are available in the git repository at:
git://linuxtv.org/jfrancois/gspca.git for_v3.2
Frank Schaefer (1):
gspca - sn9c20x: Fix status LED device 0c45:62b3.
Jean-François Moine (10):
gspca - benq: Remove the useless function sd_isoc_init
gspca - main: Use a better altsetting for image transfer
gspca - main: Handle the xHCI error on usb_set_interface()
gspca - topro: New subdriver for Topro webcams
gspca - spca1528: Increase the status waiting time
gspca - spca1528: Add some comments and update copyright
gspca - spca1528: Change the JPEG quality of the images
gspca - spca1528: Don't force the USB transfer alternate setting
gspca - main: Version change to 2.14.0
gspca - main: Display the subdriver name and version at probe time
Wolfram Sang (1):
gspca - zc3xx: New webcam 03f0:1b07 HP Premium Starter Cam
Documentation/video4linux/gspca.txt | 3 +
drivers/media/video/gspca/Kconfig | 10 +
drivers/media/video/gspca/Makefile | 2 +
drivers/media/video/gspca/benq.c | 15 -
drivers/media/video/gspca/gspca.c | 225 ++-
drivers/media/video/gspca/sn9c20x.c | 2 +-
drivers/media/video/gspca/spca1528.c | 26 +-
drivers/media/video/gspca/topro.c | 4989 ++++++++++++++++++++++++++++++++++
drivers/media/video/gspca/zc3xx.c | 1 +
9 files changed, 5180 insertions(+), 93 deletions(-)
create mode 100644 drivers/media/video/gspca/topro.c
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PATCHES FOR 3.2] gspca for_v3.2
2011-09-23 8:37 [GIT PATCHES FOR 3.2] gspca for_v3.2 Jean-Francois Moine
@ 2011-09-24 3:18 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 4+ messages in thread
From: Mauro Carvalho Chehab @ 2011-09-24 3:18 UTC (permalink / raw)
To: Jean-Francois Moine; +Cc: linux-media
Em 23-09-2011 05:37, Jean-Francois Moine escreveu:
> Hi Mauro,
>
> This set includes the patches:
> http://patchwork.linuxtv.org/patch/7358
> http://patchwork.linuxtv.org/patch/114
Thanks for doing that!
Applied, thanks!
> Cheers.
>
> The following changes since commit e553000a14ead0e265a8aa4d241c7b3221e233e3:
>
> [media] sr030pc30: Remove empty s_stream op (2011-09-21 12:48:45 -0300)
>
> are available in the git repository at:
> git://linuxtv.org/jfrancois/gspca.git for_v3.2
>
> Frank Schaefer (1):
> gspca - sn9c20x: Fix status LED device 0c45:62b3.
>
> Jean-François Moine (10):
> gspca - benq: Remove the useless function sd_isoc_init
> gspca - main: Use a better altsetting for image transfer
> gspca - main: Handle the xHCI error on usb_set_interface()
> gspca - topro: New subdriver for Topro webcams
> gspca - spca1528: Increase the status waiting time
> gspca - spca1528: Add some comments and update copyright
> gspca - spca1528: Change the JPEG quality of the images
> gspca - spca1528: Don't force the USB transfer alternate setting
> gspca - main: Version change to 2.14.0
> gspca - main: Display the subdriver name and version at probe time
>
> Wolfram Sang (1):
> gspca - zc3xx: New webcam 03f0:1b07 HP Premium Starter Cam
>
> Documentation/video4linux/gspca.txt | 3 +
> drivers/media/video/gspca/Kconfig | 10 +
> drivers/media/video/gspca/Makefile | 2 +
> drivers/media/video/gspca/benq.c | 15 -
> drivers/media/video/gspca/gspca.c | 225 ++-
> drivers/media/video/gspca/sn9c20x.c | 2 +-
> drivers/media/video/gspca/spca1528.c | 26 +-
> drivers/media/video/gspca/topro.c | 4989 ++++++++++++++++++++++++++++++++++
> drivers/media/video/gspca/zc3xx.c | 1 +
> 9 files changed, 5180 insertions(+), 93 deletions(-)
> create mode 100644 drivers/media/video/gspca/topro.c
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-09-24 3:18 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-09-23 8:37 [GIT PATCHES FOR 3.2] gspca for_v3.2 Jean-Francois Moine
2011-09-24 3:18 ` Mauro Carvalho Chehab
-- strict thread matches above, loose matches on Subject: below --
2011-08-12 8:37 Jean-Francois Moine
2011-09-21 20:14 ` Mauro Carvalho Chehab
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).