From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mailout-de.gmx.net ([213.165.64.23]:43027 "HELO mailout-de.gmx.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1753326Ab1JXHJo (ORCPT ); Mon, 24 Oct 2011 03:09:44 -0400 From: Oliver Endriss Reply-To: "Linux Media Mailing List" To: =?iso-8859-1?q?S=E9bastien_RAILLARD?= (COEXSI) Subject: Re: [DVB] Digital Devices Cine CT V6 support Date: Mon, 24 Oct 2011 09:06:16 +0200 Cc: "Linux Media Mailing List" References: <004c01cc7a03$064111c0$12c33540$@coexsi.fr> In-Reply-To: <004c01cc7a03$064111c0$12c33540$@coexsi.fr> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <201110240906.24543@orion.escape-edv.de> Sender: linux-media-owner@vger.kernel.org List-ID: Hi, > Using your latest development tree (hg clone > http://linuxtv.org/hg/~endriss/media_build_experimental), I have made a > small modification in ddbridge-core.c (see below) to make the new "Cine CT > V6" card detected by the ddbridge module. > > With this small patch, the card is now detected, but not the double C/T > tuner onboard. This cannot work, as the cards requires different frontend drivers. Please try a fresh check-out from http://linuxtv.org/hg/~endriss/media_build_experimental The Cine CT v6 is supported now. > Also, I was wondering why they put a male and a female RF connectors on the > "Cine CT V6" (maybe a loop-through?) where there are two female RF > connectors on the "DuoFlex CT" card. The second connector of the Cine CT is the loop-through output. CU Oliver -- ---------------------------------------------------------------- VDR Remote Plugin 0.4.0: http://www.escape-edv.de/endriss/vdr/ 4 MByte Mod: http://www.escape-edv.de/endriss/dvb-mem-mod/ Full-TS Mod: http://www.escape-edv.de/endriss/dvb-full-ts-mod/ ----------------------------------------------------------------