From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mailout-de.gmx.net ([213.165.64.22]:36518 "HELO mailout-de.gmx.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1751085Ab2DAOby (ORCPT ); Sun, 1 Apr 2012 10:31:54 -0400 From: "Hans-Frieder Vogt" To: Antti Palosaari Subject: Re: [GIT PULL FOR 3.5] AF9035/AF9033/TUA9001 => TerraTec Cinergy T Stick [0ccd:0093] Date: Sun, 1 Apr 2012 16:31:47 +0200 Cc: linux-media@vger.kernel.org References: <4F75A7FE.8090405@iki.fi> <201204011227.18739.hfvogt@gmx.net> <4F784AB3.9070507@iki.fi> In-Reply-To: <4F784AB3.9070507@iki.fi> MIME-Version: 1.0 Content-Type: Text/Plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Message-Id: <201204011631.47333.hfvogt@gmx.net> Sender: linux-media-owner@vger.kernel.org List-ID: Antti, I could provide the SNR, BER and UCB implementation (simply porting from my draft driver to yours). But I first need to implement the support for my AverMedia A867R device so that I am able to test the implementation. Therefore it could take a few hours (maybe until tomorrow). Regards, Hans-Frieder Am Sonntag, 1. April 2012 schrieb Antti Palosaari: > On 01.04.2012 13:27, Hans-Frieder Vogt wrote: > > nice work! I'll try to port the features that I have in my implementation > > of an af9035 driver into yours. > > You are welcome! But please tell me what you are doing to avoid > duplicate work. My today plan was to implement af9033 SNR, BER, UCB, but > if you would like to then say it for me and I will jump back to IT9135 > support. > > regards > Antti Hans-Frieder Vogt e-mail: hfvogt gmx .dot. net