From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mailout-de.gmx.net ([213.165.64.23]:49244 "HELO mailout-de.gmx.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1751945Ab2DAPEQ (ORCPT ); Sun, 1 Apr 2012 11:04:16 -0400 From: "Hans-Frieder Vogt" To: Antti Palosaari Subject: Re: [GIT PULL FOR 3.5] AF9035/AF9033/TUA9001 => TerraTec Cinergy T Stick [0ccd:0093] Date: Sun, 1 Apr 2012 17:04:09 +0200 Cc: linux-media@vger.kernel.org References: <4F75A7FE.8090405@iki.fi> <201204011631.47333.hfvogt@gmx.net> <4F786D86.90404@iki.fi> In-Reply-To: <4F786D86.90404@iki.fi> MIME-Version: 1.0 Content-Type: Text/Plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Message-Id: <201204011704.09218.hfvogt@gmx.net> Sender: linux-media-owner@vger.kernel.org List-ID: Am Sonntag, 1. April 2012 schrieb Antti Palosaari: > On 01.04.2012 17:31, Hans-Frieder Vogt wrote: > > Antti, > > > > I could provide the SNR, BER and UCB implementation (simply porting from > > my draft driver to yours). > > But I first need to implement the support for my AverMedia A867R device > > so that I am able to test the implementation. Therefore it could take a > > few hours (maybe until tomorrow). > > Aaah, OK, but I was just working with SNR. I see your driver SNR was > just register scaled to 0-0xffff whilst we nowadays prefer dBs , most > commonly unit of 0.1 dB. So if thats OK for you I will finish that, and > you can do BER and UCB, OK? OK, I'll focus on these. > > regards > > Antti [...] cheers, Hans-Frieder Vogt e-mail: hfvogt gmx .dot. net