[PATCH v2 0/3] media: tvp5150: Fix mbus format to UYUV instead of YUYV.

[PATCH v2 0/3] media: tvp5150: Fix mbus format to UYUV instead of YUYV.

[Javier Martin]

Changes since v2:
- Swap order of patches 3 and 4 to make the series bisectable.

[PATCH v2 1/3] media: tvp5150: Fix mbus format.
[PATCH v2 2/3] i.MX27: visstrim_m10: Remove use of MX2_CAMERA_SWAP16.
[PATCH v2 3/3] media: mx2_camera: Fix mbus format handling.

[PATCH v2 1/3] media: tvp5150: Fix mbus format.

[Javier Martin]

According to p.14 fig 3-3 of the datasheet (SLES098A)
this decoder transmits data in UYVY format.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
---
 drivers/media/video/tvp5150.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index e292c46..30c88e0 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -821,7 +821,7 @@ static int tvp5150_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
 	if (index)
 		return -EINVAL;
 
-	*code = V4L2_MBUS_FMT_YUYV8_2X8;
+	*code = V4L2_MBUS_FMT_UYVY8_2X8;
 	return 0;
 }
 
@@ -845,7 +845,7 @@ static int tvp5150_mbus_fmt(struct v4l2_subdev *sd,
 	f->width = decoder->rect.width;
 	f->height = decoder->rect.height;
 
-	f->code = V4L2_MBUS_FMT_YUYV8_2X8;
+	f->code = V4L2_MBUS_FMT_UYVY8_2X8;
 	f->field = V4L2_FIELD_SEQ_TB;
 	f->colorspace = V4L2_COLORSPACE_SMPTE170M;
 
-- 
1.7.0.4

[PATCH v2 2/3] i.MX27: visstrim_m10: Remove use of MX2_CAMERA_SWAP16.

[Javier Martin]

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
---
 arch/arm/mach-imx/mach-imx27_visstrim_m10.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 3128cfe..4db00c6 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -164,7 +164,7 @@ static struct platform_device visstrim_tvp5150 = {
 
 
 static struct mx2_camera_platform_data visstrim_camera = {
-	.flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE | MX2_CAMERA_SWAP16 | MX2_CAMERA_PCLK_SAMPLE_RISING,
+	.flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE | MX2_CAMERA_PCLK_SAMPLE_RISING,
 	.clk = 100000,
 };
 
-- 
1.7.0.4

[PATCH v2 3/3] media: mx2_camera: Fix mbus format handling.

[Javier Martin]

Remove MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags
so that the driver can negotiate with the attached sensor
whether the mbus format needs convertion from UYUV to YUYV
or not.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
---
 arch/arm/plat-mxc/include/mach/mx2_cam.h |    2 -
 drivers/media/video/mx2_camera.c         |   52 +++++++++++++++++++++++++++---
 2 files changed, 47 insertions(+), 7 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h
index 3c080a3..7ded6f1 100644
--- a/arch/arm/plat-mxc/include/mach/mx2_cam.h
+++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h
@@ -23,7 +23,6 @@
 #ifndef __MACH_MX2_CAM_H_
 #define __MACH_MX2_CAM_H_
 
-#define MX2_CAMERA_SWAP16		(1 << 0)
 #define MX2_CAMERA_EXT_VSYNC		(1 << 1)
 #define MX2_CAMERA_CCIR			(1 << 2)
 #define MX2_CAMERA_CCIR_INTERLACE	(1 << 3)
@@ -31,7 +30,6 @@
 #define MX2_CAMERA_GATED_CLOCK		(1 << 5)
 #define MX2_CAMERA_INV_DATA		(1 << 6)
 #define MX2_CAMERA_PCLK_SAMPLE_RISING	(1 << 7)
-#define MX2_CAMERA_PACK_DIR_MSB		(1 << 8)
 
 /**
  * struct mx2_camera_platform_data - optional platform data for mx2_camera
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index 8df624f..9274a53 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -348,6 +348,19 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = {
 					PRP_INTR_CH2OVF,
 		}
 	},
+	{
+		.in_fmt		= V4L2_MBUS_FMT_UYVY8_2X8,
+		.out_fmt	= V4L2_PIX_FMT_YUV420,
+		.cfg		= {
+			.channel	= 2,
+			.in_fmt		= PRP_CNTL_DATA_IN_YUV422,
+			.out_fmt	= PRP_CNTL_CH2_OUT_YUV420,
+			.src_pixel	= 0x22000888, /* YUV422 (YUYV) */
+			.irq_flags	= PRP_INTR_RDERR | PRP_INTR_CH2WERR |
+					PRP_INTR_CH2FC | PRP_INTR_LBOVF |
+					PRP_INTR_CH2OVF,
+		}
+	},
 };
 
 static struct mx2_fmt_cfg *mx27_emma_prp_get_format(
@@ -990,6 +1003,7 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+	const struct soc_camera_format_xlate *xlate;
 	unsigned long common_flags;
 	int ret;
 	int bytesperline;
@@ -1034,14 +1048,31 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd,
 		return ret;
 	}
 
+	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+	if (!xlate) {
+		dev_warn(icd->parent, "Format %x not found\n", pixfmt);
+		return -EINVAL;
+	}
+
+	if (xlate->code == V4L2_MBUS_FMT_YUYV8_2X8) {
+		csicr1 |= CSICR1_PACK_DIR;
+		csicr1 &= ~CSICR1_SWAP16_EN;
+		dev_dbg(icd->parent, "already yuyv format, don't convert\n");
+	} else if (xlate->code == V4L2_MBUS_FMT_UYVY8_2X8) {
+		csicr1 &= ~CSICR1_PACK_DIR;
+		csicr1 |= CSICR1_SWAP16_EN;
+		dev_dbg(icd->parent, "convert uyvy mbus format into yuyv\n");
+	} else {
+		dev_warn(icd->parent, "mbus format not supported\n");
+		return -EINVAL;
+	}
+
 	if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
 		csicr1 |= CSICR1_REDGE;
 	if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
 		csicr1 |= CSICR1_SOF_POL;
 	if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
 		csicr1 |= CSICR1_HSYNC_POL;
-	if (pcdev->platform_flags & MX2_CAMERA_SWAP16)
-		csicr1 |= CSICR1_SWAP16_EN;
 	if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC)
 		csicr1 |= CSICR1_EXT_VSYNC;
 	if (pcdev->platform_flags & MX2_CAMERA_CCIR)
@@ -1052,8 +1083,6 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd,
 		csicr1 |= CSICR1_GCLK_MODE;
 	if (pcdev->platform_flags & MX2_CAMERA_INV_DATA)
 		csicr1 |= CSICR1_INV_DATA;
-	if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB)
-		csicr1 |= CSICR1_PACK_DIR;
 
 	pcdev->csicr1 = csicr1;
 
@@ -1128,7 +1157,8 @@ static int mx2_camera_get_formats(struct soc_camera_device *icd,
 		return 0;
 	}
 
-	if (code == V4L2_MBUS_FMT_YUYV8_2X8) {
+	if (code == V4L2_MBUS_FMT_YUYV8_2X8 ||
+	    code == V4L2_MBUS_FMT_UYVY8_2X8) {
 		formats++;
 		if (xlate) {
 			/*
@@ -1144,6 +1174,18 @@ static int mx2_camera_get_formats(struct soc_camera_device *icd,
 		}
 	}
 
+	if (code == V4L2_MBUS_FMT_UYVY8_2X8) {
+		formats++;
+		if (xlate) {
+			xlate->host_fmt =
+				soc_mbus_get_fmtdesc(V4L2_MBUS_FMT_YUYV8_2X8);
+			xlate->code	= code;
+			dev_dbg(dev, "Providing host format %s for sensor code %d\n",
+				xlate->host_fmt->name, code);
+			xlate++;
+		}
+	}
+
 	/* Generic pass-trough */
 	formats++;
 	if (xlate) {
-- 
1.7.0.4

Re: [PATCH v2 2/3] i.MX27: visstrim_m10: Remove use of MX2_CAMERA_SWAP16.

[Sascha Hauer]

On Mon, Mar 26, 2012 at 03:17:47PM +0200, Javier Martin wrote:
> 
> Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

Should go via the media tree.

Sascha

> ---
>  arch/arm/mach-imx/mach-imx27_visstrim_m10.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
> index 3128cfe..4db00c6 100644
> --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
> +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
> @@ -164,7 +164,7 @@ static struct platform_device visstrim_tvp5150 = {
>  
>  
>  static struct mx2_camera_platform_data visstrim_camera = {
> -	.flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE | MX2_CAMERA_SWAP16 | MX2_CAMERA_PCLK_SAMPLE_RISING,
> +	.flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE | MX2_CAMERA_PCLK_SAMPLE_RISING,
>  	.clk = 100000,
>  };
>  
> -- 
> 1.7.0.4
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |