From: "nibble.max" <nibble.max@gmail.com>
To: "Mauro Carvalho Chehab" <mchehab@redhat.com>
Cc: linux-media <linux-media@vger.kernel.org>
Subject: [PATCH 4/6] m88ds3103, dvbsky dvb-s2 cx23885 pcie card.
Date: Sun, 15 Apr 2012 23:53:41 +0800 [thread overview]
Message-ID: <201204152353392650604@gmail.com> (raw)
In-Reply-To: 4F2185A1.2000402@redhat.com
dvbsky dvb-s2 pcie based on montage m88ds3103 demodulator.
Signed-off-by: Max nibble <nibble.max@gmail.com>
---
drivers/media/video/cx23885/Kconfig | 1 +
drivers/media/video/cx23885/cx23885-cards.c | 107 +++++++++++++++++++++++++++
drivers/media/video/cx23885/cx23885-dvb.c | 52 +++++++++++++
drivers/media/video/cx23885/cx23885-f300.c | 55 ++++++++++++++
drivers/media/video/cx23885/cx23885-f300.h | 6 ++
drivers/media/video/cx23885/cx23885-input.c | 15 ++++
drivers/media/video/cx23885/cx23885.h | 3 +
7 files changed, 239 insertions(+)
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index b391e9b..20337c7 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -20,6 +20,7 @@ config VIDEO_CX23885
select DVB_LNBP21 if !DVB_FE_CUSTOMISE
select DVB_STV6110 if !DVB_FE_CUSTOMISE
select DVB_CX24116 if !DVB_FE_CUSTOMISE
+ select DVB_M88DS3103 if !DVB_FE_CUSTOMISE
select DVB_STV0900 if !DVB_FE_CUSTOMISE
select DVB_DS3000 if !DVB_FE_CUSTOMISE
select DVB_STV0367 if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 19b5499..fdf9d0f 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -497,6 +497,20 @@ struct cx23885_board cx23885_boards[] = {
.name = "TerraTec Cinergy T PCIe Dual",
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
+ },
+
+ [CX23885_BOARD_BST_PS8512] = {
+ .name = "Bestunar PS8512",
+ .portb = CX23885_MPEG_DVB,
+ },
+ [CX23885_BOARD_DVBSKY_S950] = {
+ .name = "DVBSKY S950",
+ .portb = CX23885_MPEG_DVB,
+ },
+ [CX23885_BOARD_DVBSKY_S952] = {
+ .name = "DVBSKY S952",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
}
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -705,6 +719,18 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x153b,
.subdevice = 0x117e,
.card = CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL,
+ }, {
+ .subvendor = 0x14f1,
+ .subdevice = 0x8512,
+ .card = CX23885_BOARD_BST_PS8512,
+ }, {
+ .subvendor = 0x4254,
+ .subdevice = 0x0950,
+ .card = CX23885_BOARD_DVBSKY_S950,
+ }, {
+ .subvendor = 0x4254,
+ .subdevice = 0x0952,
+ .card = CX23885_BOARD_DVBSKY_S952,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -1216,9 +1242,57 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
/* enable irq */
cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
break;
+ case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_BST_PS8512:
+ cx23885_gpio_enable(dev, GPIO_2, 1);
+ cx23885_gpio_clear(dev, GPIO_2);
+ msleep(100);
+ cx23885_gpio_set(dev, GPIO_2);
+ break;
+ case CX23885_BOARD_DVBSKY_S952:
+ cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */
+
+ cx23885_gpio_enable(dev, GPIO_2, 1);
+ cx23885_gpio_enable(dev, GPIO_11, 1);
+
+ cx23885_gpio_clear(dev, GPIO_2);
+ cx23885_gpio_clear(dev, GPIO_11);
+ msleep(100);
+ cx23885_gpio_set(dev, GPIO_2);
+ cx23885_gpio_set(dev, GPIO_11);
+
+ break;
}
}
+static int cx23885_ir_patch(struct i2c_adapter *i2c, u8 reg, u8 mask)
+{
+ struct i2c_msg msgs[2];
+ u8 tx_buf[2], rx_buf[1];
+ /* Write register address */
+ tx_buf[0] = reg;
+ msgs[0].addr = 0x4c;
+ msgs[0].flags = 0;
+ msgs[0].len = 1;
+ msgs[0].buf = (char *) tx_buf;
+ /* Read data from register */
+ msgs[1].addr = 0x4c;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = 1;
+ msgs[1].buf = (char *) rx_buf;
+
+ i2c_transfer(i2c, msgs, 2);
+
+ tx_buf[0] = reg;
+ tx_buf[1] = rx_buf[0] | mask;
+ msgs[0].addr = 0x4c;
+ msgs[0].flags = 0;
+ msgs[0].len = 2;
+ msgs[0].buf = (char *) tx_buf;
+
+ return i2c_transfer(i2c, msgs, 1);
+}
+
int cx23885_ir_init(struct cx23885_dev *dev)
{
static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = {
@@ -1301,6 +1375,20 @@ int cx23885_ir_init(struct cx23885_dev *dev)
v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
ir_rx_pin_cfg_count, ir_rx_pin_cfg);
break;
+ case CX23885_BOARD_BST_PS8512:
+ case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
+ dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
+ if (dev->sd_ir == NULL) {
+ ret = -ENODEV;
+ break;
+ }
+ v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+ ir_rx_pin_cfg_count, ir_rx_pin_cfg);
+
+ cx23885_ir_patch(&(dev->i2c_bus[2].i2c_adap),0x1f,0x80);
+ cx23885_ir_patch(&(dev->i2c_bus[2].i2c_adap),0x23,0x80);
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
if (!enable_885_ir)
break;
@@ -1332,6 +1420,9 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
break;
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_BST_PS8512:
+ case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
/* sd_ir is a duplicate pointer to the AV Core, just clear it */
dev->sd_ir = NULL;
@@ -1375,6 +1466,9 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
break;
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_BST_PS8512:
+ case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
if (dev->sd_ir)
cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
break;
@@ -1459,6 +1553,8 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
+ case CX23885_BOARD_BST_PS8512:
+ case CX23885_BOARD_DVBSKY_S950:
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_DVBWORLD_2005:
ts1->gen_ctrl_val = 0x5; /* Parallel */
@@ -1489,6 +1585,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
+ case CX23885_BOARD_DVBSKY_S952:
+ ts1->gen_ctrl_val = 0x5; /* Parallel */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ ts2->gen_ctrl_val = 0xe; /* Serial bus + punctured clock */
+ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
@@ -1541,6 +1645,9 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_MPX885:
case CX23885_BOARD_MYGICA_X8507:
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+ case CX23885_BOARD_BST_PS8512:
+ case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 6835eb1..c5a3fa3 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -51,6 +51,7 @@
#include "stv6110.h"
#include "lnbh24.h"
#include "cx24116.h"
+#include "m88ds3103.h"
#include "cimax2.h"
#include "lgs8gxx.h"
#include "netup-eeprom.h"
@@ -489,6 +490,30 @@ static struct xc5000_config mygica_x8506_xc5000_config = {
.if_khz = 5380,
};
+/* bestunar single dvb-s2 */
+static struct m88ds3103_config bst_ds3103_config = {
+ .demod_address = 0x68,
+ .ci_mode = 0,
+ .pin_ctrl = 0x82,
+ .ts_mode = 0,
+ .set_voltage = bst_set_voltage,
+};
+/* DVBSKY dual dvb-s2 */
+static struct m88ds3103_config dvbsky_ds3103_config_pri = {
+ .demod_address = 0x68,
+ .ci_mode = 0,
+ .pin_ctrl = 0x82,
+ .ts_mode = 0,
+ .set_voltage = bst_set_voltage,
+};
+static struct m88ds3103_config dvbsky_ds3103_config_sec = {
+ .demod_address = 0x68,
+ .ci_mode = 0,
+ .pin_ctrl = 0x82,
+ .ts_mode = 1,
+ .set_voltage = dvbsky_set_voltage_sec,
+};
+
static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
@@ -1173,6 +1198,33 @@ static int dvb_register(struct cx23885_tsport *port)
break;
}
break;
+
+ case CX23885_BOARD_BST_PS8512:
+ case CX23885_BOARD_DVBSKY_S950:
+ i2c_bus = &dev->i2c_bus[1];
+ fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
+ &bst_ds3103_config,
+ &i2c_bus->i2c_adap);
+ break;
+
+ case CX23885_BOARD_DVBSKY_S952:
+ switch (port->nr) {
+ /* port B */
+ case 1:
+ i2c_bus = &dev->i2c_bus[1];
+ fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
+ &dvbsky_ds3103_config_pri,
+ &i2c_bus->i2c_adap);
+ break;
+ /* port C */
+ case 2:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
+ &dvbsky_ds3103_config_sec,
+ &i2c_bus->i2c_adap);
+ break;
+ }
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
diff --git a/drivers/media/video/cx23885/cx23885-f300.c b/drivers/media/video/cx23885/cx23885-f300.c
index 93998f2..6be0369 100644
--- a/drivers/media/video/cx23885/cx23885-f300.c
+++ b/drivers/media/video/cx23885/cx23885-f300.c
@@ -175,3 +175,58 @@ int f300_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
return f300_xfer(fe, buf);
}
+
+/* bst control */
+int bst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct cx23885_tsport *port = fe->dvb->priv;
+ struct cx23885_dev *dev = port->dev;
+
+ cx23885_gpio_enable(dev, GPIO_1, 1);
+ cx23885_gpio_enable(dev, GPIO_0, 1);
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ cx23885_gpio_set(dev, GPIO_1);
+ cx23885_gpio_clear(dev, GPIO_0);
+ break;
+ case SEC_VOLTAGE_18:
+ cx23885_gpio_set(dev, GPIO_1);
+ cx23885_gpio_set(dev, GPIO_0);
+ break;
+ case SEC_VOLTAGE_OFF:
+ cx23885_gpio_clear(dev, GPIO_1);
+ cx23885_gpio_clear(dev, GPIO_0);
+ break;
+ }
+
+
+ return 0;
+}
+
+int dvbsky_set_voltage_sec(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct cx23885_tsport *port = fe->dvb->priv;
+ struct cx23885_dev *dev = port->dev;
+
+ cx23885_gpio_enable(dev, GPIO_12, 1);
+ cx23885_gpio_enable(dev, GPIO_13, 1);
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ cx23885_gpio_set(dev, GPIO_13);
+ cx23885_gpio_clear(dev, GPIO_12);
+ break;
+ case SEC_VOLTAGE_18:
+ cx23885_gpio_set(dev, GPIO_13);
+ cx23885_gpio_set(dev, GPIO_12);
+ break;
+ case SEC_VOLTAGE_OFF:
+ cx23885_gpio_clear(dev, GPIO_13);
+ cx23885_gpio_clear(dev, GPIO_12);
+ break;
+ }
+
+
+ return 0;
+}
\ No newline at end of file
diff --git a/drivers/media/video/cx23885/cx23885-f300.h b/drivers/media/video/cx23885/cx23885-f300.h
index e73344c..cd02d02 100644
--- a/drivers/media/video/cx23885/cx23885-f300.h
+++ b/drivers/media/video/cx23885/cx23885-f300.h
@@ -1,2 +1,8 @@
+extern int dvbsky_set_voltage_sec(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage);
+
+extern int bst_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage);
+
extern int f300_set_voltage(struct dvb_frontend *fe,
fe_sec_voltage_t voltage);
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index ce765e3..69c01f3 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -87,6 +87,9 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_BST_PS8512:
+ case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
/*
* The only boards we handle right now. However other boards
* using the CX2388x integrated IR controller should be similar
@@ -138,6 +141,9 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_BST_PS8512:
+ case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
/*
* The IR controller on this board only returns pulse widths.
* Any other mode setting will fail to set up the device.
@@ -279,6 +285,15 @@ int cx23885_input_init(struct cx23885_dev *dev)
/* A guess at the remote */
rc_map = RC_MAP_TEVII_NEC;
break;
+ case CX23885_BOARD_BST_PS8512:
+ case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
+ /* Integrated CX2388[58] IR controller */
+ driver_type = RC_DRIVER_IR_RAW;
+ allowed_protos = RC_TYPE_ALL;
+ /* A guess at the remote */
+ rc_map = RC_MAP_DVBSKY;
+ break;
default:
return -ENODEV;
}
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index f020f05..2724148 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -89,6 +89,9 @@
#define CX23885_BOARD_MPX885 32
#define CX23885_BOARD_MYGICA_X8507 33
#define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34
+#define CX23885_BOARD_BST_PS8512 35
+#define CX23885_BOARD_DVBSKY_S952 36
+#define CX23885_BOARD_DVBSKY_S950 37
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
--
1.7.9.5
next prev parent reply other threads:[~2012-04-15 15:53 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-22 10:38 [PATCH 1/3] m88brs2000 DVB-S frontend and tuner module Malcolm Priestley
2012-01-26 16:56 ` Mauro Carvalho Chehab
2012-01-27 22:26 ` Malcolm Priestley
2012-04-15 15:53 ` [PATCH 1/6] m88ds3103, montage dvb-s/s2 demodulator driver nibble.max
2012-04-19 18:06 ` Mauro Carvalho Chehab
2012-04-20 8:01 ` nibble.max
2012-04-19 20:08 ` Mauro Carvalho Chehab
2012-04-20 8:01 ` nibble.max
2012-04-20 9:47 ` Antti Palosaari
2012-04-20 17:24 ` Mauro Carvalho Chehab
2012-04-21 2:45 ` nibble.max
2012-04-23 16:41 ` Antti Palosaari
2012-04-23 19:51 ` Konstantin Dimitrov
2012-04-23 21:04 ` Antti Palosaari
2012-04-27 18:44 ` Konstantin Dimitrov
2012-04-23 21:49 ` Mauro Carvalho Chehab
2012-04-27 19:01 ` Konstantin Dimitrov
2012-04-27 19:36 ` Mauro Carvalho Chehab
2012-04-27 20:37 ` Konstantin Dimitrov
2012-04-27 20:40 ` Konstantin Dimitrov
2012-04-27 20:54 ` Antti Palosaari
2012-04-27 21:01 ` Konstantin Dimitrov
2012-04-27 19:55 ` Antti Palosaari
2012-04-27 20:21 ` Konstantin Dimitrov
2012-04-27 20:42 ` Antti Palosaari
2012-04-27 21:13 ` Konstantin Dimitrov
2012-04-28 3:54 ` nibble.max
2012-04-28 9:17 ` Demod hardware pid filter implement nibble.max
2012-04-28 10:15 ` Antti Palosaari
2012-04-24 2:45 ` Re: [PATCH 1/6] m88ds3103, montage dvb-s/s2 demodulator driver nibble.max
2012-04-26 13:03 ` nibble.max
2012-04-26 13:24 ` Mauro Carvalho Chehab
2012-04-27 7:06 ` [PATCH 1/6 v2] dvbsky, montage dvb-s/s2 TS202x tuner and M88DS3103 " nibble.max
2012-04-27 11:06 ` Mauro Carvalho Chehab
2012-04-27 14:17 ` Re: [PATCH 1/6 v2] dvbsky, montage dvb-s/s2 TS202x tuner and M88DS3103demodulator driver nibble.max
2012-04-27 14:35 ` Mauro Carvalho Chehab
2012-04-27 18:03 ` Konstantin Dimitrov
2012-04-27 7:06 ` [PATCH 2/6 v2] dvbsky, dvb-s/s2 usb box nibble.max
2013-06-30 3:07 ` Fwd: " P. van Gaans
2014-01-15 19:30 ` Mauro Carvalho Chehab
2012-04-27 7:06 ` [PATCH 3/6 v2] dvbsky, dvb-s/s2 PCIe card nibble.max
2012-04-27 7:07 ` [PATCH 4/6 v2] dvbsky, dvb-s/s2 PCI card nibble.max
2012-04-27 7:07 ` [PATCH 5/6 v2] dvbsky, remote control key map nibble.max
2012-04-27 7:07 ` [PATCH 6/6 v2] dvbsky, remote control include header file nibble.max
2012-04-20 17:10 ` [PATCH 1/6] m88ds3103, montage dvb-s/s2 demodulator driver Mauro Carvalho Chehab
2012-04-15 15:53 ` [PATCH 2/6] m88ds3103, dvbsky dvb-s2 usb box nibble.max
2012-04-19 18:09 ` Mauro Carvalho Chehab
2012-04-20 8:08 ` nibble.max
2012-04-20 17:08 ` Mauro Carvalho Chehab
2012-04-15 15:53 ` [PATCH 3/6] m88ds3103, dvbsky dvb-s2 cx23883 pci card nibble.max
2012-04-15 15:53 ` nibble.max [this message]
2012-04-19 18:11 ` [PATCH 4/6] m88ds3103, dvbsky dvb-s2 cx23885 pcie card Mauro Carvalho Chehab
2012-04-15 15:53 ` [PATCH 5/6] m88ds3103, dvbsky remote control key map nibble.max
2012-04-19 18:16 ` Mauro Carvalho Chehab
2012-04-20 8:01 ` nibble.max
2012-04-15 15:53 ` [PATCH 6/6] m88ds3103, dvbsky remote control include header file nibble.max
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201204152353392650604@gmail.com \
--to=nibble.max@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).