From: Ondrej Zary <linux@rainbow-software.org>
To: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: linux-media@vger.kernel.org
Subject: Re: AverMedia Satelllite Hybrid+FM A706
Date: Fri, 21 Dec 2012 23:00:08 +0100 [thread overview]
Message-ID: <201212212300.09132.linux@rainbow-software.org> (raw)
In-Reply-To: <201212202237.12376.linux@rainbow-software.org>
Update 2:
all I2C breakage is caused by i2c gates in CE6313 and TDA8290 so I just
commented-out the calls in tuner drivers for now.
Tuner detection in tda8290 breaks because it finds CE5039 at 0x60. Disabling
CE5039 using GPIO in board_init1() and enabling it in dvb_init() allows all
chips to initialize properly:
[ 130.658813] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 130.662715] saa7133[0]: found at 0000:02:01.0, rev: 209, irq: 9, latency: 32, mmio: 0xf4000000
[ 130.665879] saa7133[0]: subsystem: 1461:2055, board: AverMedia AverTV Satellite Hybrid+FM A706 [card=191,autodetected]
[ 130.669347] saa7133[0]: board init: gpio is 3500
[ 130.822347] saa7133[0]: i2c eeprom 00: 61 14 55 20 00 00 00 00 00 00 00 00 00 00 00 00
[ 130.825689] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[ 130.829008] saa7133[0]: i2c eeprom 20: 02 40 01 02 02 01 01 04 06 ff 00 57 ff ff ff ff
[ 130.832317] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 130.835627] saa7133[0]: i2c eeprom 40: 60 a0 00 c6 96 ff 05 30 8b 05 ff 40 ff ff ff ff
[ 130.838932] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 130.842222] saa7133[0]: i2c eeprom 60: ff 89 00 c0 ff 1c 08 19 97 89 ff ff 80 15 0a ff
[ 130.845525] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 130.848833] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 130.852109] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 130.855351] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 130.858565] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 130.861736] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 130.864894] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 130.868021] saa7133[0]: i2c eeprom e0: 00 01 81 b0 65 07 ff ff ff ff ff ff ff ff ff ff
[ 130.871133] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 130.930349] tuner 2-004b: Tuner -1 found with type(s) Radio TV.
[ 130.974345] tda829x 2-004b: setting tuner address to 63
[ 131.019535] tda18271 2-0063: creating new instance
[ 131.030345] TDA18271HD/C2 detected @ 2-0063
[ 131.454335] tda18271: performing RF tracking filter calibration
[ 135.778283] tda18271: RF tracking filter calibration complete
[ 135.786296] tda829x 2-004b: type set to tda8290+18271
[ 138.635047] saa7133[0]: registered device video0 [v4l2]
[ 138.639407] saa7133[0]: registered device vbi0
[ 138.643130] saa7133[0]: registered device radio0
[ 138.676190] dvb_init() allocating 1 frontend
[ 139.730238] DVB: registering new adapter (saa7133[0])
[ 139.733196] saa7134 0000:02:01.0: DVB: registering adapter 0 frontend 0 (Zarlink ZL10313 DVB-S)...
[ 140.321583] saa7134 ALSA driver for DMA sound loaded
[ 140.325361] saa7133[0]/alsa: saa7133[0] at 0xf4000000 irq 9 registered as card -1
The card comes to life slowly: FM radio works for a couple of seconds!
With arecord | aplay, noise is played. When a radio station is tuned
(v4l2ctl -d /dev/radio0 -f something), I can hear it clearly for a 2-3 seconds,
then it fades to noise.
These errors appear in log:
[ 521.281639] tda18271c2_rf_tracking_filters_correction: [2-0063|M] error -22 on line 277
[ 521.289675] tda18271_calc_ir_measure: [2-0063|M] error -34 on line 686
[ 521.289682] tda18271_calc_bp_filter: [2-0063|M] error -34 on line 618
[ 521.289686] tda18271_calc_rf_band: [2-0063|M] error -34 on line 652
[ 521.289690] tda18271_calc_gain_taper: [2-0063|M] error -34 on line 669
--
Ondrej Zary
prev parent reply other threads:[~2012-12-21 22:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-18 21:45 AverMedia Satelllite Hybrid+FM A706 Ondrej Zary
2012-12-20 21:37 ` Ondrej Zary
2012-12-21 22:00 ` Ondrej Zary [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201212212300.09132.linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).