From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx1.redhat.com ([209.132.183.28]:17847 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752260Ab2LVXmw (ORCPT ); Sat, 22 Dec 2012 18:42:52 -0500 Date: Sat, 22 Dec 2012 21:42:24 -0200 From: Mauro Carvalho Chehab To: Roland Scheidegger Cc: linux-media@vger.kernel.org Subject: Re: terratec h5 rev. 3? Message-ID: <20121222214224.409ed60a@redhat.com> In-Reply-To: <50D62544.5060708@hispeed.ch> References: <50D3F5A8.5010903@hispeed.ch> <50D62544.5060708@hispeed.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Em Sat, 22 Dec 2012 22:25:24 +0100 Roland Scheidegger escreveu: > Am 21.12.2012 06:38, schrieb linux-media-owner@vger.kernel.org: > > Hi, > > > > I've recently got a terratec h5 for dvb-c and thought it would be > > supported but it looks like it's a newer revision not recognized by em28xx. > > After using the new_id hack it gets recognized and using various htc > > cards (notably h5 or cinergy htc stick, cards 79 and 82 respectively) it > > seems to _nearly_ work but not quite (I was using h5 firmware for the > > older version). Tuning, channel scan works however tv (or dvb radio) > > does not, since it appears the error rate is going through the roof > > (with some imagination it is possible to see some parts of the picture > > sometimes and hear some audio pieces). femon tells something like this: > > > Hmm actually it doesn't work any better at all with windows neither, so > I guess it doesn't like my cable signal (I do have another mantis-based > pci dvb-c card which works without issue). Maybe the tuner is just crappy. > So I guess it wouldn't hurt to simply add the usb id of this card > (0ccd:10b6) as another terratec h5 (this doesn't get you the IR but it's > a start I guess). > The dvb-t part though works without issue on windows, and I could not > get that to work in linux (I've used kaffeine and dvb-fe-tool to force > the dvbt delivery system if that's supposed to work). When scanning the > right frequency it spew out some error messages though: > DvbScanFilter::timerEvent: timeout while reading section; type = 0 pid = 0 > kaffeine(7527) DvbScanFilter::timerEvent: timeout while reading section; > type = 2 pid = 17 If DVB-T is also not working, then I suspect that the device is different than the previous revisions. There are two ways to connect the DRX-K with em28xx: serial or parallel. Maybe you need to touch that. The better would be to sniff the usb traffic using the tools at v4l-utils.git and see what's happening there. > > Roland > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Cheers, Mauro