From: Ondrej Zary <linux@rainbow-software.org>
To: Antti Palosaari <crope@iki.fi>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>, linux-media@vger.kernel.org
Subject: Re: [PATCH 1/4] tda8290: Allow disabling I2C gate
Date: Mon, 21 Jan 2013 19:28:05 +0100 [thread overview]
Message-ID: <201301211928.06111.linux@rainbow-software.org> (raw)
In-Reply-To: <50FD04F9.5000401@iki.fi>
On Monday 21 January 2013 10:06:01 Antti Palosaari wrote:
> On 01/21/2013 10:18 AM, Ondrej Zary wrote:
> > On Monday 21 January 2013, Antti Palosaari wrote:
> >> On 01/20/2013 11:22 PM, Ondrej Zary wrote:
> >>> Allow disabling I2C gate handling by external configuration.
> >>> This is required by cards that have all devices on a single I2C bus,
> >>> like AverMedia A706.
> >>
> >> My personal opinion is that I2C gate control should be disabled setting
> >> callback to NULL (same for the other unwanted callbacks too). There is
> >> checks for callback existence in DVB-core, it does not call callback if
> >> it is NULL.
> >
> > This is TDA8290 internal I2C gate which is used by tda8290 internally and
> > also by tda827x or tda18271.
>
> That sounds like there is some logical problems in the driver then, not
> split correctly?
>
> What I think, scenario is tda8290 is analog decoder, tda18271 is silicon
> tuner, which is connected (usually) to the tda8290 I2C bus. tda18271
> calls tda8290 I2C-gate control when needed. Analog or digital demod
> should not call its own I2C gate directly - and if it was done in some
> weird reason then it should call own callback conditionally, checking
> whether or not it is NULL.
Something like this? It seems to work for both cases (I2C gate control
enabled and disabled) - tested with Pinnacle PCTV 110i and this AverMedia
A706.
---
drivers/media/tuners/tda8290.c | 49 +++++++++++++++++++++++----------------
drivers/media/tuners/tda8290.h | 1 +
2 files changed, 30 insertions(+), 20 deletions(-)
diff --git a/drivers/media/tuners/tda8290.c b/drivers/media/tuners/tda8290.c
index 8c48521..a2b7a9f 100644
--- a/drivers/media/tuners/tda8290.c
+++ b/drivers/media/tuners/tda8290.c
@@ -233,7 +233,8 @@ static void tda8290_set_params(struct dvb_frontend *fe,
}
- tda8290_i2c_bridge(fe, 1);
+ if (fe->ops.analog_ops.i2c_gate_ctrl)
+ fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
if (fe->ops.tuner_ops.set_analog_params)
fe->ops.tuner_ops.set_analog_params(fe, params);
@@ -302,7 +303,8 @@ static void tda8290_set_params(struct dvb_frontend *fe,
}
}
- tda8290_i2c_bridge(fe, 0);
+ if (fe->ops.analog_ops.i2c_gate_ctrl)
+ fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
tuner_i2c_xfer_send(&priv->i2c_props, if_agc_set, 2);
}
@@ -424,7 +426,8 @@ static void tda8295_set_params(struct dvb_frontend *fe,
tuner_i2c_xfer_send(&priv->i2c_props, blanking_mode, 2);
msleep(20);
- tda8295_i2c_bridge(fe, 1);
+ if (fe->ops.analog_ops.i2c_gate_ctrl)
+ fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
if (fe->ops.tuner_ops.set_analog_params)
fe->ops.tuner_ops.set_analog_params(fe, params);
@@ -437,7 +440,8 @@ static void tda8295_set_params(struct dvb_frontend *fe,
else
tuner_dbg("tda8295 not locked, no signal?\n");
- tda8295_i2c_bridge(fe, 0);
+ if (fe->ops.analog_ops.i2c_gate_ctrl)
+ fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
}
/*---------------------------------------------------------------------*/
@@ -465,11 +469,13 @@ static void tda8290_standby(struct dvb_frontend *fe)
unsigned char tda8290_agc_tri[] = { 0x02, 0x20 };
struct i2c_msg msg = {.addr = priv->tda827x_addr, .flags=0, .buf=cb1, .len = 2};
- tda8290_i2c_bridge(fe, 1);
+ if (fe->ops.analog_ops.i2c_gate_ctrl)
+ fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
if (priv->ver & TDA8275A)
cb1[1] = 0x90;
i2c_transfer(priv->i2c_props.adap, &msg, 1);
- tda8290_i2c_bridge(fe, 0);
+ if (fe->ops.analog_ops.i2c_gate_ctrl)
+ fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
tuner_i2c_xfer_send(&priv->i2c_props, tda8290_agc_tri, 2);
tuner_i2c_xfer_send(&priv->i2c_props, tda8290_standby, 2);
}
@@ -537,9 +543,11 @@ static void tda8290_init_tuner(struct dvb_frontend *fe)
if (priv->ver & TDA8275A)
msg.buf = tda8275a_init;
- tda8290_i2c_bridge(fe, 1);
+ if (fe->ops.analog_ops.i2c_gate_ctrl)
+ fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
i2c_transfer(priv->i2c_props.adap, &msg, 1);
- tda8290_i2c_bridge(fe, 0);
+ if (fe->ops.analog_ops.i2c_gate_ctrl)
+ fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
}
/*---------------------------------------------------------------------*/
@@ -565,19 +573,13 @@ static struct tda18271_config tda829x_tda18271_config = {
static int tda829x_find_tuner(struct dvb_frontend *fe)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
- struct analog_demod_ops *analog_ops = &fe->ops.analog_ops;
int i, ret, tuners_found;
u32 tuner_addrs;
u8 data;
struct i2c_msg msg = { .flags = I2C_M_RD, .buf = &data, .len = 1 };
- if (!analog_ops->i2c_gate_ctrl) {
- printk(KERN_ERR "tda8290: no gate control were provided!\n");
-
- return -EINVAL;
- }
-
- analog_ops->i2c_gate_ctrl(fe, 1);
+ if (fe->ops.analog_ops.i2c_gate_ctrl)
+ fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
/* probe for tuner chip */
tuners_found = 0;
@@ -595,7 +597,8 @@ static int tda829x_find_tuner(struct dvb_frontend *fe)
give a response now
*/
- analog_ops->i2c_gate_ctrl(fe, 0);
+ if (fe->ops.analog_ops.i2c_gate_ctrl)
+ fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
if (tuners_found > 1)
for (i = 0; i < tuners_found; i++) {
@@ -618,12 +621,14 @@ static int tda829x_find_tuner(struct dvb_frontend *fe)
priv->tda827x_addr = tuner_addrs;
msg.addr = tuner_addrs;
- analog_ops->i2c_gate_ctrl(fe, 1);
+ if (fe->ops.analog_ops.i2c_gate_ctrl)
+ fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
ret = i2c_transfer(priv->i2c_props.adap, &msg, 1);
if (ret != 1) {
tuner_warn("tuner access failed!\n");
- analog_ops->i2c_gate_ctrl(fe, 0);
+ if (fe->ops.analog_ops.i2c_gate_ctrl)
+ fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
return -EREMOTEIO;
}
@@ -648,7 +653,8 @@ static int tda829x_find_tuner(struct dvb_frontend *fe)
if (fe->ops.tuner_ops.sleep)
fe->ops.tuner_ops.sleep(fe);
- analog_ops->i2c_gate_ctrl(fe, 0);
+ if (fe->ops.analog_ops.i2c_gate_ctrl)
+ fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
return 0;
}
@@ -755,6 +761,9 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe,
sizeof(struct analog_demod_ops));
}
+ if (cfg && cfg->no_i2c_gate)
+ fe->ops.analog_ops.i2c_gate_ctrl = NULL;
+
if (!(cfg) || (TDA829X_PROBE_TUNER == cfg->probe_tuner)) {
tda8295_power(fe, 1);
if (tda829x_find_tuner(fe) < 0)
diff --git a/drivers/media/tuners/tda8290.h b/drivers/media/tuners/tda8290.h
index 7e288b2..9959cc8 100644
--- a/drivers/media/tuners/tda8290.h
+++ b/drivers/media/tuners/tda8290.h
@@ -26,6 +26,7 @@ struct tda829x_config {
unsigned int probe_tuner:1;
#define TDA829X_PROBE_TUNER 0
#define TDA829X_DONT_PROBE 1
+ unsigned int no_i2c_gate:1;
};
#if defined(CONFIG_MEDIA_TUNER_TDA8290) || (defined(CONFIG_MEDIA_TUNER_TDA8290_MODULE) && defined(MODULE))
--
Ondrej Zary
next prev parent reply other threads:[~2013-01-21 18:28 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-20 21:22 [PATCH 0/4] saa7134: Add AverMedia A706 AverTV Satellite Hybrid+FM Ondrej Zary
2013-01-20 21:22 ` [PATCH 1/4] tda8290: Allow disabling I2C gate Ondrej Zary
2013-01-21 8:06 ` Antti Palosaari
2013-01-21 8:18 ` Ondrej Zary
2013-01-21 9:06 ` Antti Palosaari
2013-01-21 18:28 ` Ondrej Zary [this message]
2013-01-23 17:31 ` Antti Palosaari
2013-01-20 21:22 ` [PATCH 2/4] tda8290: Allow custom std_map for tda18271 Ondrej Zary
2013-01-20 21:22 ` [PATCH 3/4] tuner-core: Change config from unsigned int to void * Ondrej Zary
2013-01-20 21:22 ` [PATCH 4/4] saa7134: Add AverMedia A706 AverTV Satellite Hybrid+FM Ondrej Zary
2013-01-27 21:45 ` [PATCH 4/4 v2] " Ondrej Zary
-- strict thread matches above, loose matches on Subject: below --
2013-02-01 20:21 [PATCH v2 0/4] " Ondrej Zary
2013-02-01 20:21 ` [PATCH 1/4] tda8290: Allow disabling I2C gate Ondrej Zary
2013-02-04 2:19 ` Michael Krufky
2013-02-04 18:56 ` Ondrej Zary
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201301211928.06111.linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).