From: Ondrej Zary <linux@rainbow-software.org>
To: Michael Krufky <mkrufky@linuxtv.org>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>, linux-media@vger.kernel.org
Subject: Re: [PATCH 1/4] tda8290: Allow disabling I2C gate
Date: Mon, 4 Feb 2013 19:56:45 +0100 [thread overview]
Message-ID: <201302041956.45702.linux@rainbow-software.org> (raw)
In-Reply-To: <CAOcJUbxoZnHgwQKTFcGsE1R6TUJzs5NzrhAJEGG+jxWFV3O=2A@mail.gmail.com>
On Monday 04 February 2013 03:19:37 Michael Krufky wrote:
> On Fri, Feb 1, 2013 at 3:21 PM, Ondrej Zary <linux@rainbow-software.org>
wrote:
> > Allow disabling I2C gate handling by external configuration.
> > This is required by cards that have all devices on a single I2C bus,
> > like AverMedia A706.
> >
> > Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
> > ---
> > drivers/media/tuners/tda8290.c | 49
> > +++++++++++++++++++++++---------------- drivers/media/tuners/tda8290.h |
> > 1 +
> > 2 files changed, 30 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/media/tuners/tda8290.c
> > b/drivers/media/tuners/tda8290.c index 8c48521..a2b7a9f 100644
> > --- a/drivers/media/tuners/tda8290.c
> > +++ b/drivers/media/tuners/tda8290.c
> > @@ -233,7 +233,8 @@ static void tda8290_set_params(struct dvb_frontend
> > *fe, }
> >
> >
> > - tda8290_i2c_bridge(fe, 1);
> > + if (fe->ops.analog_ops.i2c_gate_ctrl)
> > + fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
> >
> > if (fe->ops.tuner_ops.set_analog_params)
> > fe->ops.tuner_ops.set_analog_params(fe, params);
> > @@ -302,7 +303,8 @@ static void tda8290_set_params(struct dvb_frontend
> > *fe, }
> > }
> >
> > - tda8290_i2c_bridge(fe, 0);
> > + if (fe->ops.analog_ops.i2c_gate_ctrl)
> > + fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
> > tuner_i2c_xfer_send(&priv->i2c_props, if_agc_set, 2);
> > }
> >
> > @@ -424,7 +426,8 @@ static void tda8295_set_params(struct dvb_frontend
> > *fe, tuner_i2c_xfer_send(&priv->i2c_props, blanking_mode, 2); msleep(20);
> >
> > - tda8295_i2c_bridge(fe, 1);
> > + if (fe->ops.analog_ops.i2c_gate_ctrl)
> > + fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
> >
> > if (fe->ops.tuner_ops.set_analog_params)
> > fe->ops.tuner_ops.set_analog_params(fe, params);
> > @@ -437,7 +440,8 @@ static void tda8295_set_params(struct dvb_frontend
> > *fe, else
> > tuner_dbg("tda8295 not locked, no signal?\n");
> >
> > - tda8295_i2c_bridge(fe, 0);
> > + if (fe->ops.analog_ops.i2c_gate_ctrl)
> > + fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
> > }
> >
> >
> > /*---------------------------------------------------------------------*/
> > @@ -465,11 +469,13 @@ static void tda8290_standby(struct dvb_frontend
> > *fe) unsigned char tda8290_agc_tri[] = { 0x02, 0x20 };
> > struct i2c_msg msg = {.addr = priv->tda827x_addr, .flags=0,
> > .buf=cb1, .len = 2};
> >
> > - tda8290_i2c_bridge(fe, 1);
> > + if (fe->ops.analog_ops.i2c_gate_ctrl)
> > + fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
> > if (priv->ver & TDA8275A)
> > cb1[1] = 0x90;
> > i2c_transfer(priv->i2c_props.adap, &msg, 1);
> > - tda8290_i2c_bridge(fe, 0);
> > + if (fe->ops.analog_ops.i2c_gate_ctrl)
> > + fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
> > tuner_i2c_xfer_send(&priv->i2c_props, tda8290_agc_tri, 2);
> > tuner_i2c_xfer_send(&priv->i2c_props, tda8290_standby, 2);
> > }
> > @@ -537,9 +543,11 @@ static void tda8290_init_tuner(struct dvb_frontend
> > *fe) if (priv->ver & TDA8275A)
> > msg.buf = tda8275a_init;
> >
> > - tda8290_i2c_bridge(fe, 1);
> > + if (fe->ops.analog_ops.i2c_gate_ctrl)
> > + fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
> > i2c_transfer(priv->i2c_props.adap, &msg, 1);
> > - tda8290_i2c_bridge(fe, 0);
> > + if (fe->ops.analog_ops.i2c_gate_ctrl)
> > + fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
> > }
> >
> >
> > /*---------------------------------------------------------------------*/
> > @@ -565,19 +573,13 @@ static struct tda18271_config
> > tda829x_tda18271_config = { static int tda829x_find_tuner(struct
> > dvb_frontend *fe)
> > {
> > struct tda8290_priv *priv = fe->analog_demod_priv;
> > - struct analog_demod_ops *analog_ops = &fe->ops.analog_ops;
> > int i, ret, tuners_found;
> > u32 tuner_addrs;
> > u8 data;
> > struct i2c_msg msg = { .flags = I2C_M_RD, .buf = &data, .len = 1
> > };
> >
> > - if (!analog_ops->i2c_gate_ctrl) {
> > - printk(KERN_ERR "tda8290: no gate control were
> > provided!\n"); -
> > - return -EINVAL;
> > - }
> > -
> > - analog_ops->i2c_gate_ctrl(fe, 1);
> > + if (fe->ops.analog_ops.i2c_gate_ctrl)
> > + fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
> >
> > /* probe for tuner chip */
> > tuners_found = 0;
> > @@ -595,7 +597,8 @@ static int tda829x_find_tuner(struct dvb_frontend
> > *fe) give a response now
> > */
> >
> > - analog_ops->i2c_gate_ctrl(fe, 0);
> > + if (fe->ops.analog_ops.i2c_gate_ctrl)
> > + fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
> >
> > if (tuners_found > 1)
> > for (i = 0; i < tuners_found; i++) {
> > @@ -618,12 +621,14 @@ static int tda829x_find_tuner(struct dvb_frontend
> > *fe) priv->tda827x_addr = tuner_addrs;
> > msg.addr = tuner_addrs;
> >
> > - analog_ops->i2c_gate_ctrl(fe, 1);
> > + if (fe->ops.analog_ops.i2c_gate_ctrl)
> > + fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
> > ret = i2c_transfer(priv->i2c_props.adap, &msg, 1);
> >
> > if (ret != 1) {
> > tuner_warn("tuner access failed!\n");
> > - analog_ops->i2c_gate_ctrl(fe, 0);
> > + if (fe->ops.analog_ops.i2c_gate_ctrl)
> > + fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
> > return -EREMOTEIO;
> > }
> >
> > @@ -648,7 +653,8 @@ static int tda829x_find_tuner(struct dvb_frontend
> > *fe) if (fe->ops.tuner_ops.sleep)
> > fe->ops.tuner_ops.sleep(fe);
> >
> > - analog_ops->i2c_gate_ctrl(fe, 0);
> > + if (fe->ops.analog_ops.i2c_gate_ctrl)
> > + fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
> >
> > return 0;
> > }
> > @@ -755,6 +761,9 @@ struct dvb_frontend *tda829x_attach(struct
> > dvb_frontend *fe, sizeof(struct analog_demod_ops));
> > }
> >
> > + if (cfg && cfg->no_i2c_gate)
> > + fe->ops.analog_ops.i2c_gate_ctrl = NULL;
> > +
> > if (!(cfg) || (TDA829X_PROBE_TUNER == cfg->probe_tuner)) {
> > tda8295_power(fe, 1);
> > if (tda829x_find_tuner(fe) < 0)
> > diff --git a/drivers/media/tuners/tda8290.h
> > b/drivers/media/tuners/tda8290.h index 7e288b2..9959cc8 100644
> > --- a/drivers/media/tuners/tda8290.h
> > +++ b/drivers/media/tuners/tda8290.h
> > @@ -26,6 +26,7 @@ struct tda829x_config {
> > unsigned int probe_tuner:1;
> > #define TDA829X_PROBE_TUNER 0
> > #define TDA829X_DONT_PROBE 1
> > + unsigned int no_i2c_gate:1;
> > };
> >
> > #if defined(CONFIG_MEDIA_TUNER_TDA8290) ||
> > (defined(CONFIG_MEDIA_TUNER_TDA8290_MODULE) && defined(MODULE))
>
> For the most part, this patch is fine and makes good sense to me.
> However, instead of adding the option to the config structure, I think
> you should just set the pointer to i2c_gate_ctrl to NULL from within
> the bridge driver -- this is what other drivers do when they want to
> disable a single function in the _ops struct.
I don't see any other way to set i2c_gate_ctrl to NULL. saa7134 calls
s_type_addr and passes the config parameter. tuner-core finds that the tuner
type is TDA8290 and calls tda829x_attach which does tuner autodetecion.
i2c_gate_ctrl must be set to NULL before this or the detection will fail.
> I already pushed your patch as-is to the zary branch of my dvb tree on
> linuxtv.org. If you want to push a new patch that incorporates my
> suggestion above, then I'll replace the patch. Otherwise, you can
> also just provide a separate patch against that tree to just remove
> the config struct change and the NULL assignment in the attach().
>
> -Mike Kruky
--
Ondrej Zary
next prev parent reply other threads:[~2013-02-04 18:57 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-01 20:21 [PATCH v2 0/4] saa7134: Add AverMedia A706 AverTV Satellite Hybrid+FM Ondrej Zary
2013-02-01 20:21 ` [PATCH 1/4] tda8290: Allow disabling I2C gate Ondrej Zary
2013-02-04 2:19 ` Michael Krufky
2013-02-04 18:56 ` Ondrej Zary [this message]
2013-02-01 20:21 ` [PATCH 2/4] tda8290: Allow custom std_map for tda18271 Ondrej Zary
2013-02-01 20:21 ` [PATCH 3/4] tuner-core: Change config from unsigned int to void * Ondrej Zary
2013-02-04 1:59 ` Michael Krufky
2013-02-04 13:43 ` Mauro Carvalho Chehab
2013-02-04 20:27 ` [PATCH] tda8290: change magic LNA config values to enum Ondrej Zary
2013-02-01 20:21 ` [PATCH 4/4] saa7134: Add AverMedia A706 AverTV Satellite Hybrid+FM Ondrej Zary
2013-02-16 16:39 ` [PATCH v2 0/4] " Ondrej Zary
2013-02-18 2:57 ` Michael Krufky
2013-03-06 22:23 ` Ondrej Zary
-- strict thread matches above, loose matches on Subject: below --
2013-01-20 21:22 [PATCH " Ondrej Zary
2013-01-20 21:22 ` [PATCH 1/4] tda8290: Allow disabling I2C gate Ondrej Zary
2013-01-21 8:06 ` Antti Palosaari
2013-01-21 8:18 ` Ondrej Zary
2013-01-21 9:06 ` Antti Palosaari
2013-01-21 18:28 ` Ondrej Zary
2013-01-23 17:31 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201302041956.45702.linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
--cc=mkrufky@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).