From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: "Frank Schäfer" <fschaefer.oss@googlemail.com>
Cc: linux-media@vger.kernel.org
Subject: Re: [PATCH v2 01/11] em28xx-i2c: replace printk() with the corresponding em28xx macros
Date: Mon, 4 Mar 2013 15:09:31 -0300 [thread overview]
Message-ID: <20130304150931.050dd815@redhat.com> (raw)
In-Reply-To: <1362339464-3373-2-git-send-email-fschaefer.oss@googlemail.com>
Em Sun, 3 Mar 2013 20:37:34 +0100
Frank Schäfer <fschaefer.oss@googlemail.com> escreveu:
> Reduces the number of characters/lines, unifies the code and improves readability.
Had you actually test this patch? The reason why printk() is used on some
places is because dev->name is not available early.
That's said, it makes sense to replace all those em28xx-specific printk
functions by the standard pr_fmt-based ones (pr_err, pr_info, pr_debug, etc).
Regards,
Mauro
>
> Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
> ---
> drivers/media/usb/em28xx/em28xx-i2c.c | 55 ++++++++++++++-------------------
> 1 Datei geändert, 24 Zeilen hinzugefügt(+), 31 Zeilen entfernt(-)
>
> diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c
> index 8532c1d..8819b54 100644
> --- a/drivers/media/usb/em28xx/em28xx-i2c.c
> +++ b/drivers/media/usb/em28xx/em28xx-i2c.c
> @@ -399,7 +399,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
> /* Check if board has eeprom */
> err = i2c_master_recv(&dev->i2c_client, &buf, 0);
> if (err < 0) {
> - em28xx_errdev("board has no eeprom\n");
> + em28xx_info("board has no eeprom\n");
> memset(eedata, 0, len);
> return -ENODEV;
> }
> @@ -408,8 +408,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
>
> err = i2c_master_send(&dev->i2c_client, &buf, 1);
> if (err != 1) {
> - printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
> - dev->name, err);
> + em28xx_errdev("failed to read eeprom (err=%d)\n", err);
> return err;
> }
>
> @@ -426,9 +425,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
>
> if (block !=
> (err = i2c_master_recv(&dev->i2c_client, p, block))) {
> - printk(KERN_WARNING
> - "%s: i2c eeprom read error (err=%d)\n",
> - dev->name, err);
> + em28xx_errdev("i2c eeprom read error (err=%d)\n", err);
> return err;
> }
> size -= block;
> @@ -436,7 +433,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
> }
> for (i = 0; i < len; i++) {
> if (0 == (i % 16))
> - printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i);
> + em28xx_info("i2c eeprom %02x:", i);
> printk(" %02x", eedata[i]);
> if (15 == (i % 16))
> printk("\n");
> @@ -445,55 +442,51 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
> if (em_eeprom->id == 0x9567eb1a)
> dev->hash = em28xx_hash_mem(eedata, len, 32);
>
> - printk(KERN_INFO "%s: EEPROM ID= 0x%08x, EEPROM hash = 0x%08lx\n",
> - dev->name, em_eeprom->id, dev->hash);
> + em28xx_info("EEPROM ID = 0x%08x, EEPROM hash = 0x%08lx\n",
> + em_eeprom->id, dev->hash);
>
> - printk(KERN_INFO "%s: EEPROM info:\n", dev->name);
> + em28xx_info("EEPROM info:\n");
>
> switch (em_eeprom->chip_conf >> 4 & 0x3) {
> case 0:
> - printk(KERN_INFO "%s:\tNo audio on board.\n", dev->name);
> + em28xx_info("\tNo audio on board.\n");
> break;
> case 1:
> - printk(KERN_INFO "%s:\tAC97 audio (5 sample rates)\n",
> - dev->name);
> + em28xx_info("\tAC97 audio (5 sample rates)\n");
> break;
> case 2:
> - printk(KERN_INFO "%s:\tI2S audio, sample rate=32k\n",
> - dev->name);
> + em28xx_info("\tI2S audio, sample rate=32k\n");
> break;
> case 3:
> - printk(KERN_INFO "%s:\tI2S audio, 3 sample rates\n",
> - dev->name);
> + em28xx_info("\tI2S audio, 3 sample rates\n");
> break;
> }
>
> if (em_eeprom->chip_conf & 1 << 3)
> - printk(KERN_INFO "%s:\tUSB Remote wakeup capable\n", dev->name);
> + em28xx_info("\tUSB Remote wakeup capable\n");
>
> if (em_eeprom->chip_conf & 1 << 2)
> - printk(KERN_INFO "%s:\tUSB Self power capable\n", dev->name);
> + em28xx_info("\tUSB Self power capable\n");
>
> switch (em_eeprom->chip_conf & 0x3) {
> case 0:
> - printk(KERN_INFO "%s:\t500mA max power\n", dev->name);
> + em28xx_info("\t500mA max power\n");
> break;
> case 1:
> - printk(KERN_INFO "%s:\t400mA max power\n", dev->name);
> + em28xx_info("\t400mA max power\n");
> break;
> case 2:
> - printk(KERN_INFO "%s:\t300mA max power\n", dev->name);
> + em28xx_info("\t300mA max power\n");
> break;
> case 3:
> - printk(KERN_INFO "%s:\t200mA max power\n", dev->name);
> + em28xx_info("\t200mA max power\n");
> break;
> }
> - printk(KERN_INFO "%s:\tTable at 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
> - dev->name,
> - em_eeprom->string_idx_table,
> - em_eeprom->string1,
> - em_eeprom->string2,
> - em_eeprom->string3);
> + em28xx_info("\tTable at offset 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
> + em_eeprom->string_idx_table,
> + em_eeprom->string1,
> + em_eeprom->string2,
> + em_eeprom->string3);
>
> return 0;
> }
> @@ -570,8 +563,8 @@ void em28xx_do_i2c_scan(struct em28xx *dev)
> if (rc < 0)
> continue;
> i2c_devicelist[i] = i;
> - printk(KERN_INFO "%s: found i2c device @ 0x%x [%s]\n",
> - dev->name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
> + em28xx_info("found i2c device @ 0x%x [%s]\n",
> + i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
> }
>
> dev->i2c_hash = em28xx_hash_mem(i2c_devicelist,
--
Cheers,
Mauro
next prev parent reply other threads:[~2013-03-04 18:09 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-03 19:37 [PATCH v2 00/11] em28xx: i2c debugging cleanups and support for newer eeproms Frank Schäfer
2013-03-03 19:37 ` [PATCH v2 01/11] em28xx-i2c: replace printk() with the corresponding em28xx macros Frank Schäfer
2013-03-04 18:09 ` Mauro Carvalho Chehab [this message]
2013-03-04 18:27 ` Frank Schäfer
2013-03-04 18:46 ` Mauro Carvalho Chehab
2013-03-03 19:37 ` [PATCH v2 02/11] em28xx-i2c: get rid of the dprintk2 macro Frank Schäfer
2013-03-03 19:37 ` [PATCH v2 03/11] em28xx-i2c: also print debug messages at debug level 1 Frank Schäfer
2013-03-03 19:37 ` [PATCH v2 04/11] em28xx: do not interpret eeprom content if eeprom key is invalid Frank Schäfer
2013-03-03 19:37 ` [PATCH v2 05/11] em28xx: fix eeprom data endianess Frank Schäfer
2013-03-03 19:37 ` [PATCH v2 06/11] em28xx: make sure we are at i2c bus A when calling em28xx_i2c_register() Frank Schäfer
2013-03-04 19:14 ` Mauro Carvalho Chehab
2013-03-04 21:24 ` Frank Schäfer
2013-03-05 2:31 ` Mauro Carvalho Chehab
2013-03-03 19:37 ` [PATCH v2 07/11] em28xx: add basic support for eeproms with 16 bit address width Frank Schäfer
2013-03-03 19:37 ` [PATCH v2 08/11] em28xx: add helper function for reading data blocks from i2c clients Frank Schäfer
2013-03-03 19:37 ` [PATCH v2 09/11] em28xx: do not store eeprom content permanently Frank Schäfer
2013-03-03 19:37 ` [PATCH v2 10/11] em28xx: extract the device configuration dataset from eeproms with 16 bit address width Frank Schäfer
2013-03-03 19:37 ` [PATCH v2 11/11] em28xx: enable tveeprom for device Hauppauge HVR-930C Frank Schäfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130304150931.050dd815@redhat.com \
--to=mchehab@redhat.com \
--cc=fschaefer.oss@googlemail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).