From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-1.atlantis.sk ([80.94.52.57]:49356 "EHLO mail.atlantis.sk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753730Ab3DNVUJ (ORCPT ); Sun, 14 Apr 2013 17:20:09 -0400 From: Ondrej Zary To: Mauro Carvalho Chehab Subject: Re: [PATCH] bttv: Add noname Bt848 capture card with 14MHz xtal Date: Sun, 14 Apr 2013 23:19:47 +0200 Cc: linux-media@vger.kernel.org References: <201304141839.10168.linux@rainbow-software.org> In-Reply-To: <201304141839.10168.linux@rainbow-software.org> MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <201304142319.47887.linux@rainbow-software.org> Sender: linux-media-owner@vger.kernel.org List-ID: On Sunday 14 April 2013 18:39:09 Ondrej Zary wrote: > Add support for noname Bt848 capture-only card (3x composite, 1x S-VHS) > with 14MHz crystal: > http://www.rainbow-software.org/images/hardware/bt848_.jpg Noticed that it takes ages to load the bttv module (about 30 seconds). If "disable_ir=1" parameter is used, it loads immediately. I wonder why the bttv driver probes for IR chips even when the "has_remote" flag is not set? -- Ondrej Zary