From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
To: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: "Jon Arne Jørgensen" <jonarne@jonarne.no>,
"Linux Media Mailing List" <linux-media@vger.kernel.org>
Subject: Re: [PATCH 2/2] saa7115: add detection code for gm7113c
Date: Fri, 26 Apr 2013 10:39:19 -0300 [thread overview]
Message-ID: <20130426133917.GA20185@localhost> (raw)
In-Reply-To: <1366980557-23077-3-git-send-email-mchehab@redhat.com>
On Fri, Apr 26, 2013 at 09:49:17AM -0300, Mauro Carvalho Chehab wrote:
> Adds a code that (auto)detects gm7113c clones. The auto-detection
> here is not perfect, as, on contrary to what it would be expected
> by looking into its datasheets some devices would return, instead:
>
> saa7115 0-0025: chip 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 @ 0x4a is unknown
>
> (found on a device labeled as GM7113C 1145 by Ezequiel Garcia)
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
> ---
> drivers/media/i2c/saa7115.c | 36 ++++++++++++++++++++++++++++++++++++
> include/media/v4l2-chip-ident.h | 2 ++
> 2 files changed, 38 insertions(+)
>
> diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
> index 2bc8b72..24672a7 100644
> --- a/drivers/media/i2c/saa7115.c
> +++ b/drivers/media/i2c/saa7115.c
> @@ -1640,6 +1640,36 @@ static int saa711x_detect_chip(struct i2c_client *client,
> }
> }
>
> + /* Check if it is a gm1113c */
s/1113/7113
> + if (!memcmp(name, "0000", 4)) {
> + chip_id = 0;
> + for (i = 0; i < 4; i++) {
> + chip_id = chip_id << 1;
> + chip_id |= (chip_ver[i] & 0x80) ? 1 : 0;
> + }
> +
> + /*
> + * Note: From the datasheet, only versions 1 and 2
> + * exists. However, tests on a device labeled as:
> + * "GM7113C 1145" returned "10" on all 16 chip
> + * version (reg 0x00) reads. So, we need to also
> + * accept at least verion 0. For now, let's just
> + * assume that a device that returns "0000" for
> + * the lower nibble is a gm1113c.
Is this weird comment indentation correct?
And also:
s/1113/7113
> + */
> +
> + snprintf(name, size, "gm1113c");
Ditto.
> +
> + if (!autodetect && strcmp(name, id->name))
> + return -EINVAL;
> +
> + v4l_dbg(1, debug, client,
> + "It seems to be a %s chip (%*ph) @ 0x%x.\n",
> + name, 16, chip_ver, client->addr << 1);
> +
> + return V4L2_IDENT_GM7113C;
> + }
> +
> /* Chip was not discovered. Return its ID and don't bind */
> v4l_dbg(1, debug, client, "chip %*ph @ 0x%x is unknown.\n",
> 16, chip_ver, client->addr << 1);
> @@ -1669,6 +1699,11 @@ static int saa711x_probe(struct i2c_client *client,
> if (ident < 0)
> return ident;
>
> + if (ident == V4L2_IDENT_GM7113C) {
> + v4l_warn(client, "%s not yet supported\n", name);
> + return -ENODEV;
> + }
> +
> strlcpy(client->name, name, sizeof(client->name));
>
> state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL);
> @@ -1756,6 +1791,7 @@ static const struct i2c_device_id saa711x_id[] = {
> { "saa7114", 0 },
> { "saa7115", 0 },
> { "saa7118", 0 },
> + { "gm7113c", 0 },
> { }
> };
> MODULE_DEVICE_TABLE(i2c, saa711x_id);
> diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
> index c259b36..543f89c 100644
> --- a/include/media/v4l2-chip-ident.h
> +++ b/include/media/v4l2-chip-ident.h
> @@ -52,6 +52,8 @@ enum {
> V4L2_IDENT_SAA7115 = 105,
> V4L2_IDENT_SAA7118 = 108,
>
> + V4L2_IDENT_GM7113C = 140,
> +
> /* module saa7127: reserved range 150-199 */
> V4L2_IDENT_SAA7127 = 157,
> V4L2_IDENT_SAA7129 = 159,
> --
> 1.8.1.4
>
--
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
next prev parent reply other threads:[~2013-04-26 13:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-26 12:49 [PATCH 0/2] saa7115: add detection code for gm7113c Mauro Carvalho Chehab
2013-04-26 12:49 ` [PATCH 1/2] saa7115: move the autodetection code out of the probe function Mauro Carvalho Chehab
2013-04-26 13:41 ` Ezequiel Garcia
2013-04-26 12:49 ` [PATCH 2/2] saa7115: add detection code for gm7113c Mauro Carvalho Chehab
2013-04-26 13:39 ` Ezequiel Garcia [this message]
2013-04-26 13:46 ` [PATCH 0/2] " Ezequiel Garcia
2013-04-26 14:25 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130426133917.GA20185@localhost \
--to=ezequiel.garcia@free-electrons.com \
--cc=jonarne@jonarne.no \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).