linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* mceusb Fintek ir transmitter only works when X is not running
@ 2013-08-04 12:56 Rajil Saraswat
  2013-08-05 11:29 ` Sean Young
  0 siblings, 1 reply; 7+ messages in thread
From: Rajil Saraswat @ 2013-08-04 12:56 UTC (permalink / raw)
  To: linux-media

Hi,

I have a HP MCE ir transreceiver which is recognised as Fintek device.
The receiver works fine, however the transmitter only works when there
is no X session running.


When X is stopped and the following command is issued from the virtual
console (tty1), then the transmitter works:

irsend SEND_ONCE mceusb KEY_1


However, as soon as X is started even though irsend goes through, the
transmitter led's dont go through. Any idea why this may be happening?



These are the system details:
#uname -a
Linux localhost 3.10.4-gentoo #7 SMP Sun Aug 4 12:07:08 BST 2013
x86_64 Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz GenuineIntel GNU/Linux

# lsusb
Bus 002 Device 008: ID 1934:5168 Feature Integration Technology Inc.
(Fintek) F71610A or F71612A Consumer Infrared Receiver/Transceiver

#cat /etc/conf.d/lircd
LIRCD_OPTS="-d /dev/lirc0"


Thanks
Rajil

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2013-08-06 17:21 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-08-04 12:56 mceusb Fintek ir transmitter only works when X is not running Rajil Saraswat
2013-08-05 11:29 ` Sean Young
2013-08-05 18:17   ` Rajil Saraswat
2013-08-05 21:15     ` Sean Young
2013-08-05 22:57       ` Rajil Saraswat
2013-08-06  8:31         ` Sean Young
2013-08-06 17:21           ` Rajil Saraswat

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).