From: Mauro Carvalho Chehab <m.chehab@samsung.com>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: linux-media@vger.kernel.org, laurent.pinchart@ideasonboard.com,
s.nawrocki@samsung.com, ismael.luceno@corp.bluecherry.net,
pete@sensoray.com, sakari.ailus@iki.fi,
Hans Verkuil <hans.verkuil@cisco.com>
Subject: Re: [REVIEWv3 PATCH 08/35] v4l2-ctrls: create type_ops.
Date: Tue, 11 Mar 2014 20:56:02 -0300 [thread overview]
Message-ID: <20140311205602.2064ee52@samsung.com> (raw)
In-Reply-To: <531F76EF.5010707@xs4all.nl>
Em Tue, 11 Mar 2014 21:49:51 +0100
Hans Verkuil <hverkuil@xs4all.nl> escreveu:
> On 03/11/2014 09:22 PM, Mauro Carvalho Chehab wrote:
> > Em Mon, 17 Feb 2014 10:57:23 +0100
> > Hans Verkuil <hverkuil@xs4all.nl> escreveu:
> >
> >> From: Hans Verkuil <hans.verkuil@cisco.com>
> >>
> >> Since complex controls can have non-standard types we need to be able to do
> >> type-specific checks etc. In order to make that easy type operations are added.
> >> There are four operations:
> >>
> >> - equal: check if two values are equal
> >> - init: initialize a value
> >> - log: log the value
> >> - validate: validate a new value
> >
> > So far, I failed to see why this is needed, as all code below is actually
> > related to non-complex controls, but your comment is confusing, saying that
> > this is related to complex controls.
>
> If a driver adds support for a complex control specific to that driver you
> want to allow the driver to add these type operations to support the control.
> So instead of hardcoding it in the control framework you want to implement it
> as type ops that a driver can replace with its own.
Not sure if I bought the idea of letting the compound controls to be
driver-specific.
IMO, we should define them at the core, in order to be sure that:
1) it will be properly documented;
2) all implementations will handle it at the same way.
>
> But the first step is to implement the current type operations as type ops.
>
> > Maybe a latter patch will help me to better understand this one.
> >
> >> This patch uses the v4l2_ctrl_ptr union for the first time.
>
> This sentence is not true, ignore it. The union was already used in patch 6
> where it was introduced. It's a left-over from an earlier version of the patch
> series.
>
> Regards,
>
> Hans
>
> >
> > Then move v4l2_ctrl_ptr union addition to this patch.
> >
> >>
> >> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> >> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> >> ---
> >> drivers/media/v4l2-core/v4l2-ctrls.c | 267 ++++++++++++++++++++++-------------
> >> include/media/v4l2-ctrls.h | 21 +++
> >> 2 files changed, 190 insertions(+), 98 deletions(-)
> >>
> >> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
> >> index 5d1eeea..fa737a5 100644
> >> --- a/drivers/media/v4l2-core/v4l2-ctrls.c
> >> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
> >> @@ -1132,6 +1132,149 @@ static void send_event(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, u32 changes)
> >> v4l2_event_queue_fh(sev->fh, &ev);
> >> }
> >>
> >> +static bool std_equal(const struct v4l2_ctrl *ctrl,
> >> + union v4l2_ctrl_ptr ptr1,
> >> + union v4l2_ctrl_ptr ptr2)
> >> +{
> >> + switch (ctrl->type) {
> >> + case V4L2_CTRL_TYPE_BUTTON:
> >> + return false;
> >> + case V4L2_CTRL_TYPE_STRING:
> >> + /* strings are always 0-terminated */
> >> + return !strcmp(ptr1.p_char, ptr2.p_char);
> >> + case V4L2_CTRL_TYPE_INTEGER64:
> >> + return *ptr1.p_s64 == *ptr2.p_s64;
> >> + default:
> >> + if (ctrl->is_ptr)
> >> + return !memcmp(ptr1.p, ptr2.p, ctrl->elem_size);
> >> + return *ptr1.p_s32 == *ptr2.p_s32;
> >> + }
> >> +}
> >> +
> >> +static void std_init(const struct v4l2_ctrl *ctrl,
> >> + union v4l2_ctrl_ptr ptr)
> >> +{
> >> + switch (ctrl->type) {
> >> + case V4L2_CTRL_TYPE_STRING:
> >> + memset(ptr.p_char, ' ', ctrl->minimum);
> >> + ptr.p_char[ctrl->minimum] = '\0';
> >> + break;
> >> + case V4L2_CTRL_TYPE_INTEGER64:
> >> + *ptr.p_s64 = ctrl->default_value;
> >> + break;
> >> + case V4L2_CTRL_TYPE_INTEGER:
> >> + case V4L2_CTRL_TYPE_INTEGER_MENU:
> >> + case V4L2_CTRL_TYPE_MENU:
> >> + case V4L2_CTRL_TYPE_BITMASK:
> >> + case V4L2_CTRL_TYPE_BOOLEAN:
> >> + *ptr.p_s32 = ctrl->default_value;
> >> + break;
> >> + default:
> >> + break;
> >> + }
> >> +}
> >> +
> >> +static void std_log(const struct v4l2_ctrl *ctrl)
> >> +{
> >> + union v4l2_ctrl_ptr ptr = ctrl->stores[0];
> >> +
> >> + switch (ctrl->type) {
> >> + case V4L2_CTRL_TYPE_INTEGER:
> >> + pr_cont("%d", *ptr.p_s32);
> >> + break;
> >> + case V4L2_CTRL_TYPE_BOOLEAN:
> >> + pr_cont("%s", *ptr.p_s32 ? "true" : "false");
> >> + break;
> >> + case V4L2_CTRL_TYPE_MENU:
> >> + pr_cont("%s", ctrl->qmenu[*ptr.p_s32]);
> >> + break;
> >> + case V4L2_CTRL_TYPE_INTEGER_MENU:
> >> + pr_cont("%lld", ctrl->qmenu_int[*ptr.p_s32]);
> >> + break;
> >> + case V4L2_CTRL_TYPE_BITMASK:
> >> + pr_cont("0x%08x", *ptr.p_s32);
> >> + break;
> >> + case V4L2_CTRL_TYPE_INTEGER64:
> >> + pr_cont("%lld", *ptr.p_s64);
> >> + break;
> >> + case V4L2_CTRL_TYPE_STRING:
> >> + pr_cont("%s", ptr.p_char);
> >> + break;
> >> + default:
> >> + pr_cont("unknown type %d", ctrl->type);
> >> + break;
> >> + }
> >> +}
> >> +
> >> +/* Round towards the closest legal value */
> >> +#define ROUND_TO_RANGE(val, offset_type, ctrl) \
> >> +({ \
> >> + offset_type offset; \
> >> + val += (ctrl)->step / 2; \
> >> + val = clamp_t(typeof(val), val, \
> >> + (ctrl)->minimum, (ctrl)->maximum); \
> >> + offset = (val) - (ctrl)->minimum; \
> >> + offset = (ctrl)->step * (offset / (ctrl)->step); \
> >> + val = (ctrl)->minimum + offset; \
> >> + 0; \
> >> +})
> >> +
> >> +/* Validate a new control */
> >> +static int std_validate(const struct v4l2_ctrl *ctrl,
> >> + union v4l2_ctrl_ptr ptr)
> >> +{
> >> + size_t len;
> >> +
> >> + switch (ctrl->type) {
> >> + case V4L2_CTRL_TYPE_INTEGER:
> >> + return ROUND_TO_RANGE(*ptr.p_s32, u32, ctrl);
> >> + case V4L2_CTRL_TYPE_INTEGER64:
> >> + return ROUND_TO_RANGE(*ptr.p_s64, u64, ctrl);
> >> +
> >> + case V4L2_CTRL_TYPE_BOOLEAN:
> >> + *ptr.p_s32 = !!*ptr.p_s32;
> >> + return 0;
> >> +
> >> + case V4L2_CTRL_TYPE_MENU:
> >> + case V4L2_CTRL_TYPE_INTEGER_MENU:
> >> + if (*ptr.p_s32 < ctrl->minimum || *ptr.p_s32 > ctrl->maximum)
> >> + return -ERANGE;
> >> + if (ctrl->menu_skip_mask & (1 << *ptr.p_s32))
> >> + return -EINVAL;
> >> + if (ctrl->type == V4L2_CTRL_TYPE_MENU &&
> >> + ctrl->qmenu[*ptr.p_s32][0] == '\0')
> >> + return -EINVAL;
> >> + return 0;
> >> +
> >> + case V4L2_CTRL_TYPE_BITMASK:
> >> + *ptr.p_s32 &= ctrl->maximum;
> >> + return 0;
> >> +
> >> + case V4L2_CTRL_TYPE_BUTTON:
> >> + case V4L2_CTRL_TYPE_CTRL_CLASS:
> >> + *ptr.p_s32 = 0;
> >> + return 0;
> >> +
> >> + case V4L2_CTRL_TYPE_STRING:
> >> + len = strlen(ptr.p_char);
> >> + if (len < ctrl->minimum)
> >> + return -ERANGE;
> >> + if ((len - ctrl->minimum) % ctrl->step)
> >> + return -ERANGE;
> >> + return 0;
> >> +
> >> + default:
> >> + return -EINVAL;
> >> + }
> >> +}
> >> +
> >> +static const struct v4l2_ctrl_type_ops std_type_ops = {
> >> + .equal = std_equal,
> >> + .init = std_init,
> >> + .log = std_log,
> >> + .validate = std_validate,
> >> +};
> >> +
> >> /* Helper function: copy the current control value back to the caller */
> >> static int cur_to_user(struct v4l2_ext_control *c,
> >> struct v4l2_ctrl *ctrl)
> >> @@ -1315,21 +1458,7 @@ static int cluster_changed(struct v4l2_ctrl *master)
> >>
> >> if (ctrl == NULL)
> >> continue;
> >> - switch (ctrl->type) {
> >> - case V4L2_CTRL_TYPE_BUTTON:
> >> - /* Button controls are always 'different' */
> >> - return 1;
> >> - case V4L2_CTRL_TYPE_STRING:
> >> - /* strings are always 0-terminated */
> >> - diff = strcmp(ctrl->string, ctrl->cur.string);
> >> - break;
> >> - case V4L2_CTRL_TYPE_INTEGER64:
> >> - diff = ctrl->val64 != ctrl->cur.val64;
> >> - break;
> >> - default:
> >> - diff = ctrl->val != ctrl->cur.val;
> >> - break;
> >> - }
> >> + diff = !ctrl->type_ops->equal(ctrl, ctrl->stores[0], ctrl->new);
> >> }
> >> return diff;
> >> }
> >> @@ -1370,65 +1499,30 @@ static int check_range(enum v4l2_ctrl_type type,
> >> }
> >> }
> >>
> >> -/* Round towards the closest legal value */
> >> -#define ROUND_TO_RANGE(val, offset_type, ctrl) \
> >> -({ \
> >> - offset_type offset; \
> >> - val += (ctrl)->step / 2; \
> >> - val = clamp_t(typeof(val), val, \
> >> - (ctrl)->minimum, (ctrl)->maximum); \
> >> - offset = (val) - (ctrl)->minimum; \
> >> - offset = (ctrl)->step * (offset / (ctrl)->step); \
> >> - val = (ctrl)->minimum + offset; \
> >> - 0; \
> >> -})
> >> -
> >> /* Validate a new control */
> >> static int validate_new(const struct v4l2_ctrl *ctrl,
> >> struct v4l2_ext_control *c)
> >> {
> >> - size_t len;
> >> + union v4l2_ctrl_ptr ptr;
> >>
> >> switch (ctrl->type) {
> >> case V4L2_CTRL_TYPE_INTEGER:
> >> - return ROUND_TO_RANGE(*(s32 *)&c->value, u32, ctrl);
> >> - case V4L2_CTRL_TYPE_INTEGER64:
> >> - return ROUND_TO_RANGE(*(s64 *)&c->value64, u64, ctrl);
> >> -
> >> - case V4L2_CTRL_TYPE_BOOLEAN:
> >> - c->value = !!c->value;
> >> - return 0;
> >> -
> >> - case V4L2_CTRL_TYPE_MENU:
> >> case V4L2_CTRL_TYPE_INTEGER_MENU:
> >> - if (c->value < ctrl->minimum || c->value > ctrl->maximum)
> >> - return -ERANGE;
> >> - if (ctrl->menu_skip_mask & (1 << c->value))
> >> - return -EINVAL;
> >> - if (ctrl->type == V4L2_CTRL_TYPE_MENU &&
> >> - ctrl->qmenu[c->value][0] == '\0')
> >> - return -EINVAL;
> >> - return 0;
> >> -
> >> + case V4L2_CTRL_TYPE_MENU:
> >> case V4L2_CTRL_TYPE_BITMASK:
> >> - c->value &= ctrl->maximum;
> >> - return 0;
> >> -
> >> + case V4L2_CTRL_TYPE_BOOLEAN:
> >> case V4L2_CTRL_TYPE_BUTTON:
> >> case V4L2_CTRL_TYPE_CTRL_CLASS:
> >> - c->value = 0;
> >> - return 0;
> >> + ptr.p_s32 = &c->value;
> >> + return ctrl->type_ops->validate(ctrl, ptr);
> >>
> >> - case V4L2_CTRL_TYPE_STRING:
> >> - len = strlen(c->string);
> >> - if (len < ctrl->minimum)
> >> - return -ERANGE;
> >> - if ((len - ctrl->minimum) % ctrl->step)
> >> - return -ERANGE;
> >> - return 0;
> >> + case V4L2_CTRL_TYPE_INTEGER64:
> >> + ptr.p_s64 = &c->value64;
> >> + return ctrl->type_ops->validate(ctrl, ptr);
> >>
> >> default:
> >> - return -EINVAL;
> >> + ptr.p = c->p;
> >> + return ctrl->type_ops->validate(ctrl, ptr);
> >> }
> >> }
> >>
> >> @@ -1645,6 +1739,7 @@ unlock:
> >> /* Add a new control */
> >> static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
> >> const struct v4l2_ctrl_ops *ops,
> >> + const struct v4l2_ctrl_type_ops *type_ops,
> >> u32 id, const char *name, const char *unit,
> >> enum v4l2_ctrl_type type,
> >> s64 min, s64 max, u64 step, s64 def,
> >> @@ -1656,6 +1751,7 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
> >> unsigned sz_extra;
> >> void *data;
> >> int err;
> >> + int s;
> >>
> >> if (hdl->error)
> >> return NULL;
> >> @@ -1706,6 +1802,7 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
> >> INIT_LIST_HEAD(&ctrl->ev_subs);
> >> ctrl->handler = hdl;
> >> ctrl->ops = ops;
> >> + ctrl->type_ops = type_ops ? type_ops : &std_type_ops;
> >> ctrl->id = id;
> >> ctrl->name = name;
> >> ctrl->unit = unit;
> >> @@ -1727,19 +1824,16 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
> >> ctrl->cur.val = ctrl->val = def;
> >> data = &ctrl->stores[1];
> >>
> >> - if (ctrl->is_string) {
> >> - ctrl->string = ctrl->new.p_char = data;
> >> - ctrl->stores[0].p_char = data + elem_size;
> >> -
> >> - if (ctrl->minimum)
> >> - memset(ctrl->cur.string, ' ', ctrl->minimum);
> >> - } else if (ctrl->is_ptr) {
> >> + if (ctrl->is_ptr) {
> >> ctrl->p = ctrl->new.p = data;
> >> ctrl->stores[0].p = data + elem_size;
> >> } else {
> >> ctrl->new.p = &ctrl->val;
> >> ctrl->stores[0].p = &ctrl->cur.val;
> >> }
> >> + for (s = -1; s <= 0; s++)
> >> + ctrl->type_ops->init(ctrl, ctrl->stores[s]);
> >> +
> >> if (handler_new_ref(hdl, ctrl)) {
> >> kfree(ctrl);
> >> return NULL;
> >> @@ -1784,7 +1878,7 @@ struct v4l2_ctrl *v4l2_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
> >> return NULL;
> >> }
> >>
> >> - ctrl = v4l2_ctrl_new(hdl, cfg->ops, cfg->id, name, unit,
> >> + ctrl = v4l2_ctrl_new(hdl, cfg->ops, cfg->type_ops, cfg->id, name, unit,
> >> type, min, max,
> >> is_menu ? cfg->menu_skip_mask : step,
> >> def, cfg->elem_size,
> >> @@ -1812,7 +1906,7 @@ struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
> >> handler_set_err(hdl, -EINVAL);
> >> return NULL;
> >> }
> >> - return v4l2_ctrl_new(hdl, ops, id, name, unit, type,
> >> + return v4l2_ctrl_new(hdl, ops, NULL, id, name, unit, type,
> >> min, max, step, def, 0,
> >> flags, NULL, NULL, NULL);
> >> }
> >> @@ -1846,7 +1940,7 @@ struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
> >> handler_set_err(hdl, -EINVAL);
> >> return NULL;
> >> }
> >> - return v4l2_ctrl_new(hdl, ops, id, name, unit, type,
> >> + return v4l2_ctrl_new(hdl, ops, NULL, id, name, unit, type,
> >> 0, max, mask, def, 0,
> >> flags, qmenu, qmenu_int, NULL);
> >> }
> >> @@ -1879,7 +1973,8 @@ struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items(struct v4l2_ctrl_handler *hdl,
> >> handler_set_err(hdl, -EINVAL);
> >> return NULL;
> >> }
> >> - return v4l2_ctrl_new(hdl, ops, id, name, unit, type, 0, max, mask, def,
> >> + return v4l2_ctrl_new(hdl, ops, NULL, id, name, unit, type,
> >> + 0, max, mask, def,
> >> 0, flags, qmenu, NULL, NULL);
> >>
> >> }
> >> @@ -1904,7 +1999,7 @@ struct v4l2_ctrl *v4l2_ctrl_new_int_menu(struct v4l2_ctrl_handler *hdl,
> >> handler_set_err(hdl, -EINVAL);
> >> return NULL;
> >> }
> >> - return v4l2_ctrl_new(hdl, ops, id, name, unit, type,
> >> + return v4l2_ctrl_new(hdl, ops, NULL, id, name, unit, type,
> >> 0, max, 0, def, 0,
> >> flags, NULL, qmenu_int, NULL);
> >> }
> >> @@ -2087,32 +2182,8 @@ static void log_ctrl(const struct v4l2_ctrl *ctrl,
> >>
> >> pr_info("%s%s%s: ", prefix, colon, ctrl->name);
> >>
> >> - switch (ctrl->type) {
> >> - case V4L2_CTRL_TYPE_INTEGER:
> >> - pr_cont("%d", ctrl->cur.val);
> >> - break;
> >> - case V4L2_CTRL_TYPE_BOOLEAN:
> >> - pr_cont("%s", ctrl->cur.val ? "true" : "false");
> >> - break;
> >> - case V4L2_CTRL_TYPE_MENU:
> >> - pr_cont("%s", ctrl->qmenu[ctrl->cur.val]);
> >> - break;
> >> - case V4L2_CTRL_TYPE_INTEGER_MENU:
> >> - pr_cont("%lld", ctrl->qmenu_int[ctrl->cur.val]);
> >> - break;
> >> - case V4L2_CTRL_TYPE_BITMASK:
> >> - pr_cont("0x%08x", ctrl->cur.val);
> >> - break;
> >> - case V4L2_CTRL_TYPE_INTEGER64:
> >> - pr_cont("%lld", ctrl->cur.val64);
> >> - break;
> >> - case V4L2_CTRL_TYPE_STRING:
> >> - pr_cont("%s", ctrl->cur.string);
> >> - break;
> >> - default:
> >> - pr_cont("unknown type %d", ctrl->type);
> >> - break;
> >> - }
> >> + ctrl->type_ops->log(ctrl);
> >> +
> >> if (ctrl->flags & (V4L2_CTRL_FLAG_INACTIVE |
> >> V4L2_CTRL_FLAG_GRABBED |
> >> V4L2_CTRL_FLAG_VOLATILE)) {
> >> diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
> >> index 515c1ba..aaf7333 100644
> >> --- a/include/media/v4l2-ctrls.h
> >> +++ b/include/media/v4l2-ctrls.h
> >> @@ -67,6 +67,23 @@ struct v4l2_ctrl_ops {
> >> int (*s_ctrl)(struct v4l2_ctrl *ctrl);
> >> };
> >>
> >> +/** struct v4l2_ctrl_type_ops - The control type operations that the driver has to provide.
> >> + * @equal: return true if both values are equal.
> >> + * @init: initialize the value.
> >> + * @log: log the value.
> >> + * @validate: validate the value. Return 0 on success and a negative value otherwise.
> >> + */
> >> +struct v4l2_ctrl_type_ops {
> >> + bool (*equal)(const struct v4l2_ctrl *ctrl,
> >> + union v4l2_ctrl_ptr ptr1,
> >> + union v4l2_ctrl_ptr ptr2);
> >> + void (*init)(const struct v4l2_ctrl *ctrl,
> >> + union v4l2_ctrl_ptr ptr);
> >> + void (*log)(const struct v4l2_ctrl *ctrl);
> >> + int (*validate)(const struct v4l2_ctrl *ctrl,
> >> + union v4l2_ctrl_ptr ptr);
> >> +};
> >> +
> >> typedef void (*v4l2_ctrl_notify_fnc)(struct v4l2_ctrl *ctrl, void *priv);
> >>
> >> /** struct v4l2_ctrl - The control structure.
> >> @@ -102,6 +119,7 @@ typedef void (*v4l2_ctrl_notify_fnc)(struct v4l2_ctrl *ctrl, void *priv);
> >> * value, then the whole cluster is in manual mode. Drivers should
> >> * never set this flag directly.
> >> * @ops: The control ops.
> >> + * @type_ops: The control type ops.
> >> * @id: The control ID.
> >> * @name: The control name.
> >> * @unit: The control's unit. May be NULL.
> >> @@ -151,6 +169,7 @@ struct v4l2_ctrl {
> >> unsigned int manual_mode_value:8;
> >>
> >> const struct v4l2_ctrl_ops *ops;
> >> + const struct v4l2_ctrl_type_ops *type_ops;
> >> u32 id;
> >> const char *name;
> >> const char *unit;
> >> @@ -234,6 +253,7 @@ struct v4l2_ctrl_handler {
> >>
> >> /** struct v4l2_ctrl_config - Control configuration structure.
> >> * @ops: The control ops.
> >> + * @type_ops: The control type ops. Only needed for complex controls.
> >> * @id: The control ID.
> >> * @name: The control name.
> >> * @unit: The control's unit.
> >> @@ -259,6 +279,7 @@ struct v4l2_ctrl_handler {
> >> */
> >> struct v4l2_ctrl_config {
> >> const struct v4l2_ctrl_ops *ops;
> >> + const struct v4l2_ctrl_type_ops *type_ops;
> >> u32 id;
> >> const char *name;
> >> const char *unit;
> >
> >
>
--
Regards,
Mauro
next prev parent reply other threads:[~2014-03-11 23:56 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-17 9:57 [REVIEWv3 PATCH 00/35] Add support for complex controls, use in solo/go7007 Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 01/35] v4l2-ctrls: increase internal min/max/step/def to 64 bit Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 02/35] v4l2-ctrls: add unit string Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 03/35] v4l2-ctrls: use pr_info/cont instead of printk Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 04/35] videodev2.h: add initial support for complex controls Hans Verkuil
2014-03-11 19:34 ` Mauro Carvalho Chehab
2014-03-11 20:23 ` Hans Verkuil
2014-03-11 23:48 ` Mauro Carvalho Chehab
2014-02-17 9:57 ` [REVIEWv3 PATCH 05/35] videodev2.h: add struct v4l2_query_ext_ctrl and VIDIOC_QUERY_EXT_CTRL Hans Verkuil
2014-03-11 19:42 ` Mauro Carvalho Chehab
2014-03-11 20:29 ` Hans Verkuil
2014-03-11 23:35 ` Mauro Carvalho Chehab
2014-02-17 9:57 ` [REVIEWv3 PATCH 06/35] v4l2-ctrls: add support for complex types Hans Verkuil
2014-03-11 20:14 ` Mauro Carvalho Chehab
2014-03-11 20:43 ` Hans Verkuil
2014-03-11 23:43 ` Mauro Carvalho Chehab
2014-02-17 9:57 ` [REVIEWv3 PATCH 07/35] v4l2: integrate support for VIDIOC_QUERY_EXT_CTRL Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 08/35] v4l2-ctrls: create type_ops Hans Verkuil
2014-03-11 20:22 ` Mauro Carvalho Chehab
2014-03-11 20:49 ` Hans Verkuil
2014-03-11 23:56 ` Mauro Carvalho Chehab [this message]
2014-02-17 9:57 ` [REVIEWv3 PATCH 09/35] v4l2-ctrls: rewrite copy routines to operate on union v4l2_ctrl_ptr Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 10/35] v4l2-ctrls: compare values only once Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 11/35] v4l2-ctrls: prepare for matrix support: add cols & rows fields Hans Verkuil
2014-03-12 10:34 ` Mauro Carvalho Chehab
2014-02-17 9:57 ` [REVIEWv3 PATCH 12/35] v4l2-ctrls: replace cur by a union v4l2_ctrl_ptr Hans Verkuil
2014-03-12 10:38 ` Mauro Carvalho Chehab
2014-02-17 9:57 ` [REVIEWv3 PATCH 13/35] v4l2-ctrls: use 'new' to access pointer controls Hans Verkuil
2014-03-12 10:40 ` Mauro Carvalho Chehab
2014-02-17 9:57 ` [REVIEWv3 PATCH 14/35] v4l2-ctrls: prepare for matrix support Hans Verkuil
2014-03-12 10:42 ` Mauro Carvalho Chehab
2014-03-12 12:21 ` Hans Verkuil
2014-03-12 13:00 ` Mauro Carvalho Chehab
2014-03-12 13:00 ` Mauro Carvalho Chehab
2014-03-12 13:41 ` Hans Verkuil
2014-03-12 13:44 ` Sylwester Nawrocki
2014-02-17 9:57 ` [REVIEWv3 PATCH 15/35] v4l2-ctrls: type_ops can handle matrix elements Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 16/35] v4l2-ctrls: add matrix support Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 17/35] v4l2-ctrls: return elem_size instead of strlen Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 18/35] v4l2-ctrl: fix error return of copy_to/from_user Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 19/35] DocBook media: document VIDIOC_QUERY_EXT_CTRL Hans Verkuil
2014-03-12 14:13 ` Mauro Carvalho Chehab
2014-03-13 7:58 ` Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 20/35] DocBook media: update VIDIOC_G/S/TRY_EXT_CTRLS Hans Verkuil
2014-03-12 14:20 ` Mauro Carvalho Chehab
2014-03-13 12:18 ` Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 21/35] DocBook media: fix coding style in the control example code Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 22/35] DocBook media: update control section Hans Verkuil
2014-02-19 23:15 ` Sakari Ailus
2014-03-12 14:27 ` Mauro Carvalho Chehab
2014-02-17 9:57 ` [REVIEWv3 PATCH 23/35] v4l2-controls.txt: update to the new way of accessing controls Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 24/35] v4l2-ctrls/videodev2.h: add u8 and u16 types Hans Verkuil
2014-03-12 14:44 ` Mauro Carvalho Chehab
2014-02-17 9:57 ` [REVIEWv3 PATCH 25/35] DocBook media: document new u8 and u16 control types Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 26/35] v4l2-ctrls: fix comments Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 27/35] v4l2-ctrls/v4l2-controls.h: add MD controls Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 28/35] DocBook media: document new motion detection controls Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 29/35] v4l2: add a motion detection event Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 30/35] DocBook: document new v4l " Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 31/35] solo6x10: implement the new motion detection controls Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 32/35] solo6x10: implement the motion detection event Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 33/35] solo6x10: fix 'dma from stack' warning Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 34/35] solo6x10: check dma_map_sg() return value Hans Verkuil
2014-02-17 9:57 ` [REVIEWv3 PATCH 35/35] go7007: add motion detection support Hans Verkuil
2014-02-19 8:28 ` [REVIEWv3 PATCH 00/35] Add support for complex controls, use in solo/go7007 Ricardo Ribalda Delgado
2014-02-19 8:54 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140311205602.2064ee52@samsung.com \
--to=m.chehab@samsung.com \
--cc=hans.verkuil@cisco.com \
--cc=hverkuil@xs4all.nl \
--cc=ismael.luceno@corp.bluecherry.net \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=pete@sensoray.com \
--cc=s.nawrocki@samsung.com \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox