Terratec Cinergy T XS Firmware (Kernel 3.14.1)

public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed

* Terratec Cinergy T XS Firmware (Kernel 3.14.1)
@ 2014-04-23 20:34 Daniel Exner
  2014-04-23 20:42 ` Devin Heitmueller
  0 siblings, 1 reply; 8+ messages in thread
From: Daniel Exner @ 2014-04-23 20:34 UTC (permalink / raw)
  To: linux-media; +Cc: dex

[-- Attachment #1: Type: text/plain, Size: 1013 bytes --]

Hi,

(Please keep me in CC as I'm currently not subscribed to this Mailinglist)

I happened to inherit one of those DVB-T Sticks

> ID 0ccd:0043 TerraTec Electronic GmbH Cinergy T XS

and of course it isn't working as exspected.

So far I extracted the firmware the tuner_xc2028 module was telling me
(xc3028-v27.fw) and the module loaded.
But no dvb device nodes where created.

I tried connecting directly to it using xawtv and that gave me a load of
"Incorrect readback of firmware version." messages.

Then I tried loading the module with debug=1 and now I see:

> Device is Xceive 34584 version 8.7, firmware version 1.8

So I guess the driver is trying to use the wrong firmware file.

I extracted some file named merlinC.rom from the Terratec Windows
Drivers that I suspect to contain the firmware.

Now I need some help how to verify that and create a usable fw File for
the driver.

Greetings
Daniel
-- 
Daniel Exner
Public-Key: https://www.dragonslave.de/pub_key.asc

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: Terratec Cinergy T XS Firmware (Kernel 3.14.1)
  2014-04-23 20:34 Terratec Cinergy T XS Firmware (Kernel 3.14.1) Daniel Exner
@ 2014-04-23 20:42 ` Devin Heitmueller
  2014-04-23 20:50   ` Daniel Exner
  0 siblings, 1 reply; 8+ messages in thread
From: Devin Heitmueller @ 2014-04-23 20:42 UTC (permalink / raw)
  To: Daniel Exner; +Cc: Linux Media Mailing List

On Wed, Apr 23, 2014 at 4:34 PM, Daniel Exner <dex@dragonslave.de> wrote:
> Hi,
>
> (Please keep me in CC as I'm currently not subscribed to this Mailinglist)
>
> I happened to inherit one of those DVB-T Sticks
>
>> ID 0ccd:0043 TerraTec Electronic GmbH Cinergy T XS
>
> and of course it isn't working as exspected.
>
> So far I extracted the firmware the tuner_xc2028 module was telling me
> (xc3028-v27.fw) and the module loaded.
> But no dvb device nodes where created.
>
> I tried connecting directly to it using xawtv and that gave me a load of
> "Incorrect readback of firmware version." messages.
>
> Then I tried loading the module with debug=1 and now I see:
>
>> Device is Xceive 34584 version 8.7, firmware version 1.8
>
> So I guess the driver is trying to use the wrong firmware file.
>
> I extracted some file named merlinC.rom from the Terratec Windows
> Drivers that I suspect to contain the firmware.
>
> Now I need some help how to verify that and create a usable fw File for
> the driver.

You can get the firmware via the following procedure:

http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028#How_to_Obtain_the_Firmware

or if you're on Ubuntu it's already packaged in
linux-firmware-nonfree.  The file itself is 66220 bytes and has an MD5
checksum of 293dc5e915d9a0f74a368f8a2ce3cc10.

Note that if you have that file in /lib/firmware, it's entirely
possible that the driver is just broken (this happens quite often).
The values read back by dmesg are from the device itself, so if the
chip wasn't properly initialized fields such as the version will
contain garbage values.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: Terratec Cinergy T XS Firmware (Kernel 3.14.1)
  2014-04-23 20:42 ` Devin Heitmueller
@ 2014-04-23 20:50   ` Daniel Exner
  2014-04-24 11:29     ` Mauro Carvalho Chehab
  0 siblings, 1 reply; 8+ messages in thread
From: Daniel Exner @ 2014-04-23 20:50 UTC (permalink / raw)
  To: Linux Media Mailing List; +Cc: dex

[-- Attachment #1: Type: text/plain, Size: 1330 bytes --]

Hi,

Am 23.04.2014 22:42, schrieb Devin Heitmueller:
> On Wed, Apr 23, 2014 at 4:34 PM, Daniel Exner <dex@dragonslave.de> wrote:
> You can get the firmware via the following procedure:
> 
> http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028#How_to_Obtain_the_Firmware
> 
> or if you're on Ubuntu it's already packaged in
> linux-firmware-nonfree.  The file itself is 66220 bytes and has an MD5
> checksum of 293dc5e915d9a0f74a368f8a2ce3cc10.

I used that procedure and have exactly that file in my /lib/firmware dir.

> Note that if you have that file in /lib/firmware, it's entirely
> possible that the driver is just broken (this happens quite often).
> The values read back by dmesg are from the device itself, so if the
> chip wasn't properly initialized fields such as the version will
> contain garbage values.
On the page you linked above older firmware versions are mentions that
should be supported by the driver.

My Question is: how to get them?

But you may be right, because "Device is Xceive 34584" seems also wrong
(didn't find any hint such a device exists..)

I'm willing to invest some time to repair the driver.
Anyone interested in helping me in getting this thing back to work?

Greetings
Daniel
-- 
Daniel Exner
Public-Key: https://www.dragonslave.de/pub_key.asc


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: Terratec Cinergy T XS Firmware (Kernel 3.14.1)
  2014-04-23 20:50   ` Daniel Exner
@ 2014-04-24 11:29     ` Mauro Carvalho Chehab
  2014-04-24 19:09       ` Daniel Exner
  0 siblings, 1 reply; 8+ messages in thread
From: Mauro Carvalho Chehab @ 2014-04-24 11:29 UTC (permalink / raw)
  To: Daniel Exner; +Cc: Linux Media Mailing List

Em Wed, 23 Apr 2014 22:50:36 +0200
Daniel Exner <dex@dragonslave.de> escreveu:

> Hi,
> 
> Am 23.04.2014 22:42, schrieb Devin Heitmueller:
> > On Wed, Apr 23, 2014 at 4:34 PM, Daniel Exner <dex@dragonslave.de> wrote:
> > You can get the firmware via the following procedure:
> > 
> > http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028#How_to_Obtain_the_Firmware
> > 
> > or if you're on Ubuntu it's already packaged in
> > linux-firmware-nonfree.  The file itself is 66220 bytes and has an MD5
> > checksum of 293dc5e915d9a0f74a368f8a2ce3cc10.
> 
> I used that procedure and have exactly that file in my /lib/firmware dir.
> 
> > Note that if you have that file in /lib/firmware, it's entirely
> > possible that the driver is just broken (this happens quite often).
> > The values read back by dmesg are from the device itself, so if the
> > chip wasn't properly initialized fields such as the version will
> > contain garbage values.
> On the page you linked above older firmware versions are mentions that
> should be supported by the driver.
> 
> My Question is: how to get them?
> 
> But you may be right, because "Device is Xceive 34584" seems also wrong
> (didn't find any hint such a device exists..)
> 
> I'm willing to invest some time to repair the driver.
> Anyone interested in helping me in getting this thing back to work?

That doesn't seem to be a driver issue, but a badly extracted
firmware. The firmware version should be 2.7. It the version doesn't
match, that means that the firmware was not properly loaded.

The driver checks if the firmware version loaded matches the version
of the file, and prints warnings via dmesg.

Are you sure that the md5sum of the firmware is 
293dc5e915d9a0f74a368f8a2ce3cc10?

-- 

Regards,
Mauro

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: Terratec Cinergy T XS Firmware (Kernel 3.14.1)
  2014-04-24 11:29     ` Mauro Carvalho Chehab
@ 2014-04-24 19:09       ` Daniel Exner
  2014-04-24 19:24         ` Devin Heitmueller
  0 siblings, 1 reply; 8+ messages in thread
From: Daniel Exner @ 2014-04-24 19:09 UTC (permalink / raw)
  To: Linux Media Mailing List; +Cc: dex


[-- Attachment #1.1: Type: text/plain, Size: 906 bytes --]

Hi,

Am Thu, 24 Apr 2014 08:29:19 -0300
schrieb Mauro Carvalho Chehab <m.chehab@samsung.com>:

> That doesn't seem to be a driver issue, but a badly extracted
> firmware. The firmware version should be 2.7. It the version doesn't
> match, that means that the firmware was not properly loaded.
> 
> The driver checks if the firmware version loaded matches the version
> of the file, and prints warnings via dmesg.
> 
> Are you sure that the md5sum of the firmware is 
> 293dc5e915d9a0f74a368f8a2ce3cc10?
> 

Yes, I am sure. The tuner-xc2028 module even reports FW Version 2.7.

What I suspect is, that this piece of hardware simply doesn't work with
that firmware version. 

Find attached the whole output of dmesg after loading the module with
debug=1, pluggin in device and starting xawtv.

Greetings
Daniel
-- 
Daniel Exner
Public-Key: https://www.dragonslave.de/pub_key.asc

[-- Attachment #1.2: xc2028.txt --]
[-- Type: text/plain, Size: 25723 bytes --]

usb 3-2: new high-speed USB device number 3 using xhci_hcd
usb 3-2: New USB device found, idVendor=0ccd, idProduct=0043
usb 3-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 3-2: Product: Cinergy T USB XS
usb 3-2: Manufacturer: TerraTec Electronic GmbH
em28xx: New device TerraTec Electronic GmbH Cinergy T USB XS @ 480 Mbps (0ccd:0043, interface 0, class 0)
em28xx: Video interface 0 found: isoc
em28xx: DVB interface 0 found: isoc
em28xx: chip ID is em2870
em2870 #0: EEPROM ID = 1a eb 67 95, EEPROM hash = 0x8d1e3bdf
em2870 #0: EEPROM info:
em2870 #0: 	No audio on board.
em2870 #0: 	500mA max power
em2870 #0: 	Table at offset 0x06, strings=0x246a, 0x348e, 0x0000
em2870 #0: Identified as Terratec Cinergy T XS (card=43)
em2870 #0: 

em2870 #0: The support for this board weren't valid yet.
em2870 #0: Please send a report of having this working
em2870 #0: not to V4L mailing list (and/or to other addresses)

em2870 #0: analog set to isoc mode.
em2870 #0: dvb set to isoc mode.
usbcore: registered new interface driver em28xx
em2870 #0: Registering V4L2 extension
Chip ID is not zero. It is not a TEA5767
tuner 16-0060: Tuner -1 found with type(s) Radio TV.
xc2028: Xcv2028/3028 init called!
xc2028 16-0060: creating new instance
xc2028 16-0060: type set to XCeive xc2028/xc3028 tuner
xc2028 16-0060: xc2028_set_config called
xc2028 16-0060: xc2028_set_analog_freq called
xc2028 16-0060: generic_set_freq called
xc2028 16-0060: should set frequency 567250 kHz
xc2028 16-0060: check_firmware called
xc2028 16-0060: xc2028_set_analog_freq called
xc2028 16-0060: generic_set_freq called
xc2028 16-0060: should set frequency 567250 kHz
xc2028 16-0060: check_firmware called
xc2028 16-0060: request_firmware_nowait(): OK
xc2028 16-0060: load_all_firmwares called
xc2028 16-0060: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
xc2028 16-0060: Reading firmware type BASE F8MHZ (3), id 0, size=8718.
xc2028 16-0060: Reading firmware type BASE F8MHZ MTS (7), id 0, size=8712.
xc2028 16-0060: Reading firmware type BASE FM (401), id 0, size=8562.
xc2028 16-0060: Reading firmware type BASE FM INPUT1 (c01), id 0, size=8576.
xc2028 16-0060: Reading firmware type BASE (1), id 0, size=8706.
xc2028 16-0060: Reading firmware type BASE MTS (5), id 0, size=8682.
xc2028 16-0060: Reading firmware type (0), id 100000007, size=161.
xc2028 16-0060: Reading firmware type MTS (4), id 100000007, size=169.
xc2028 16-0060: Reading firmware type (0), id 200000007, size=161.
xc2028 16-0060: Reading firmware type MTS (4), id 200000007, size=169.
xc2028 16-0060: Reading firmware type (0), id 400000007, size=161.
xc2028 16-0060: Reading firmware type MTS (4), id 400000007, size=169.
xc2028 16-0060: Reading firmware type (0), id 800000007, size=161.
xc2028 16-0060: Reading firmware type MTS (4), id 800000007, size=169.
xc2028 16-0060: Reading firmware type (0), id 3000000e0, size=161.
xc2028 16-0060: Reading firmware type MTS (4), id 3000000e0, size=169.
xc2028 16-0060: Reading firmware type (0), id c000000e0, size=161.
xc2028 16-0060: Reading firmware type MTS (4), id c000000e0, size=169.
xc2028 16-0060: Reading firmware type (0), id 200000, size=161.
xc2028 16-0060: Reading firmware type MTS (4), id 200000, size=169.
xc2028 16-0060: Reading firmware type (0), id 4000000, size=161.
xc2028 16-0060: Reading firmware type MTS (4), id 4000000, size=169.
xc2028 16-0060: Reading firmware type D2633 DTV6 ATSC (10030), id 0, size=149.
xc2028 16-0060: Reading firmware type D2620 DTV6 QAM (68), id 0, size=149.
xc2028 16-0060: Reading firmware type D2633 DTV6 QAM (70), id 0, size=149.
xc2028 16-0060: Reading firmware type D2620 DTV7 (88), id 0, size=149.
xc2028 16-0060: Reading firmware type D2633 DTV7 (90), id 0, size=149.
xc2028 16-0060: Reading firmware type D2620 DTV78 (108), id 0, size=149.
xc2028 16-0060: Reading firmware type D2633 DTV78 (110), id 0, size=149.
xc2028 16-0060: Reading firmware type D2620 DTV8 (208), id 0, size=149.
xc2028 16-0060: Reading firmware type D2633 DTV8 (210), id 0, size=149.
xc2028 16-0060: Reading firmware type FM (400), id 0, size=135.
xc2028 16-0060: Reading firmware type (0), id 10, size=161.
xc2028 16-0060: Reading firmware type MTS (4), id 10, size=169.
xc2028 16-0060: Reading firmware type (0), id 1000400000, size=169.
xc2028 16-0060: Reading firmware type (0), id c00400000, size=161.
xc2028 16-0060: Reading firmware type (0), id 800000, size=161.
xc2028 16-0060: Reading firmware type (0), id 8000, size=161.
xc2028 16-0060: Reading firmware type LCD (1000), id 8000, size=161.
xc2028 16-0060: Reading firmware type LCD NOGD (3000), id 8000, size=161.
xc2028 16-0060: Reading firmware type MTS (4), id 8000, size=169.
xc2028 16-0060: Reading firmware type (0), id b700, size=161.
xc2028 16-0060: Reading firmware type LCD (1000), id b700, size=161.
xc2028 16-0060: Reading firmware type LCD NOGD (3000), id b700, size=161.
xc2028 16-0060: Reading firmware type (0), id 2000, size=161.
xc2028 16-0060: Reading firmware type MTS (4), id b700, size=169.
xc2028 16-0060: Reading firmware type MTS LCD (1004), id b700, size=169.
xc2028 16-0060: Reading firmware type MTS LCD NOGD (3004), id b700, size=169.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_3280 (60000000), id 0, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_3300 (60000000), id 0, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_3440 (60000000), id 0, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_3460 (60000000), id 0, size=192.
xc2028 16-0060: Reading firmware type DTV6 ATSC OREN36 SCODE HAS_IF_3800 (60210020), id 0, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_4000 (60000000), id 0, size=192.
xc2028 16-0060: Reading firmware type DTV6 ATSC TOYOTA388 SCODE HAS_IF_4080 (60410020), id 0, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_4200 (60000000), id 0, size=192.
xc2028 16-0060: Reading firmware type MONO SCODE HAS_IF_4320 (60008000), id 8000, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_4450 (60000000), id 0, size=192.
xc2028 16-0060: Reading firmware type MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id b700, size=192.
xc2028 16-0060: Reading firmware type LCD NOGD IF SCODE HAS_IF_4600 (60023000), id 8000, size=192.
xc2028 16-0060: Reading firmware type DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_4940 (60000000), id 0, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_5260 (60000000), id 0, size=192.
xc2028 16-0060: Reading firmware type MONO SCODE HAS_IF_5320 (60008000), id f00000007, size=192.
xc2028 16-0060: Reading firmware type DTV7 DTV78 DTV8 DIBCOM52 CHINA SCODE HAS_IF_5400 (65000380), id 0, size=192.
xc2028 16-0060: Reading firmware type DTV6 ATSC OREN538 SCODE HAS_IF_5580 (60110020), id 0, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_5640 (60000000), id 300000007, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_5740 (60000000), id c00000007, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_5900 (60000000), id 0, size=192.
xc2028 16-0060: Reading firmware type MONO SCODE HAS_IF_6000 (60008000), id c04c000f0, size=192.
xc2028 16-0060: Reading firmware type DTV6 QAM ATSC LG60 F6MHZ SCODE HAS_IF_6200 (68050060), id 0, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_6240 (60000000), id 10, size=192.
xc2028 16-0060: Reading firmware type MONO SCODE HAS_IF_6320 (60008000), id 200000, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_6340 (60000000), id 200000, size=192.
xc2028 16-0060: Reading firmware type MONO SCODE HAS_IF_6500 (60008000), id c044000e0, size=192.
xc2028 16-0060: Reading firmware type DTV6 ATSC ATI638 SCODE HAS_IF_6580 (60090020), id 0, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_6600 (60000000), id 3000000e0, size=192.
xc2028 16-0060: Reading firmware type MONO SCODE HAS_IF_6680 (60008000), id 3000000e0, size=192.
xc2028 16-0060: Reading firmware type DTV6 ATSC TOYOTA794 SCODE HAS_IF_8140 (60810020), id 0, size=192.
xc2028 16-0060: Reading firmware type SCODE HAS_IF_8200 (60000000), id 0, size=192.
xc2028 16-0060: Firmware files loaded.
em2870 #0: V4L2 video device registered as video1
xc2028 16-0060: Putting xc2028/3028 into poweroff mode.
em2870 #0: V4L2 extension successfully initialized
em28xx: Registered (Em28xx v4l2 Extension) extension
xc2028 16-0060: xc2028_signal called
xc2028 16-0060: xc2028_set_analog_freq called
xc2028 16-0060: generic_set_freq called
xc2028 16-0060: should set frequency 567250 kHz
xc2028 16-0060: check_firmware called
xc2028 16-0060: checking firmware, user requested type=F8MHZ (2), id 00000000000000ff, scode_tbl (0), scode_nr 0
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Found firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Load init1 firmware, if exists
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=F8MHZ (2), id 00000000000000ff.
xc2028 16-0060: Selecting best matching firmware (3 bits) for type=(0), id 00000000000000ff:
xc2028 16-0060: Found firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Loading firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Trying to load scode 0
xc2028 16-0060: load_scode called
xc2028 16-0060: seek_firmware called, want type=F8MHZ SCODE (20000002), id 0000000100000007.
xc2028 16-0060: Found firmware for type=SCODE (20000000), id 0000000f00000007.
xc2028 16-0060: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
xc2028 16-0060: xc2028_get_reg 0004 called
xc2028 16-0060: xc2028_get_reg 0008 called
xc2028 16-0060: Device is Xceive 34584 version 8.7, firmware version 1.8
xc2028 16-0060: Incorrect readback of firmware version.
xc2028 16-0060: Retrying firmware load
xc2028 16-0060: checking firmware, user requested type=F8MHZ (2), id 00000000000000ff, scode_tbl (0), scode_nr 0
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Found firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Load init1 firmware, if exists
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=F8MHZ (2), id 00000000000000ff.
xc2028 16-0060: Selecting best matching firmware (3 bits) for type=(0), id 00000000000000ff:
xc2028 16-0060: Found firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Loading firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Trying to load scode 0
xc2028 16-0060: load_scode called
xc2028 16-0060: seek_firmware called, want type=F8MHZ SCODE (20000002), id 0000000100000007.
xc2028 16-0060: Found firmware for type=SCODE (20000000), id 0000000f00000007.
xc2028 16-0060: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
xc2028 16-0060: xc2028_get_reg 0004 called
xc2028 16-0060: xc2028_get_reg 0008 called
xc2028 16-0060: Device is Xceive 34584 version 8.7, firmware version 1.8
xc2028 16-0060: Incorrect readback of firmware version.
xc2028 16-0060: Retrying firmware load
xc2028 16-0060: checking firmware, user requested type=F8MHZ (2), id 00000000000000ff, scode_tbl (0), scode_nr 0
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Found firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Load init1 firmware, if exists
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=F8MHZ (2), id 00000000000000ff.
xc2028 16-0060: Selecting best matching firmware (3 bits) for type=(0), id 00000000000000ff:
xc2028 16-0060: Found firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Loading firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Trying to load scode 0
xc2028 16-0060: load_scode called
xc2028 16-0060: seek_firmware called, want type=F8MHZ SCODE (20000002), id 0000000100000007.
xc2028 16-0060: Found firmware for type=SCODE (20000000), id 0000000f00000007.
xc2028 16-0060: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
xc2028 16-0060: xc2028_get_reg 0004 called
xc2028 16-0060: xc2028_get_reg 0008 called
xc2028 16-0060: Device is Xceive 34584 version 8.7, firmware version 1.8
xc2028 16-0060: Incorrect readback of firmware version.
xc2028 16-0060: Retrying firmware load
xc2028 16-0060: checking firmware, user requested type=F8MHZ (2), id 00000000000000ff, scode_tbl (0), scode_nr 0
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Found firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Load init1 firmware, if exists
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=F8MHZ (2), id 00000000000000ff.
xc2028 16-0060: Selecting best matching firmware (3 bits) for type=(0), id 00000000000000ff:
xc2028 16-0060: Found firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Loading firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Trying to load scode 0
xc2028 16-0060: load_scode called
xc2028 16-0060: seek_firmware called, want type=F8MHZ SCODE (20000002), id 0000000100000007.
xc2028 16-0060: Found firmware for type=SCODE (20000000), id 0000000f00000007.
xc2028 16-0060: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
xc2028 16-0060: xc2028_get_reg 0004 called
xc2028 16-0060: xc2028_get_reg 0008 called
xc2028 16-0060: Device is Xceive 34584 version 8.7, firmware version 1.8
xc2028 16-0060: Incorrect readback of firmware version.
xc2028 16-0060: Retrying firmware load
xc2028 16-0060: checking firmware, user requested type=F8MHZ (2), id 00000000000000ff, scode_tbl (0), scode_nr 0
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Found firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Load init1 firmware, if exists
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=F8MHZ (2), id 00000000000000ff.
xc2028 16-0060: Selecting best matching firmware (3 bits) for type=(0), id 00000000000000ff:
xc2028 16-0060: Found firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Loading firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Trying to load scode 0
xc2028 16-0060: load_scode called
xc2028 16-0060: seek_firmware called, want type=F8MHZ SCODE (20000002), id 0000000100000007.
xc2028 16-0060: Found firmware for type=SCODE (20000000), id 0000000f00000007.
xc2028 16-0060: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
xc2028 16-0060: xc2028_get_reg 0004 called
xc2028 16-0060: xc2028_get_reg 0008 called
xc2028 16-0060: Device is Xceive 34584 version 8.7, firmware version 1.8
xc2028 16-0060: Incorrect readback of firmware version.
xc2028 16-0060: Retrying firmware load
xc2028 16-0060: checking firmware, user requested type=F8MHZ (2), id 00000000000000ff, scode_tbl (0), scode_nr 0
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Found firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Load init1 firmware, if exists
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=F8MHZ (2), id 00000000000000ff.
xc2028 16-0060: Selecting best matching firmware (3 bits) for type=(0), id 00000000000000ff:
xc2028 16-0060: Found firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Loading firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Trying to load scode 0
xc2028 16-0060: load_scode called
xc2028 16-0060: seek_firmware called, want type=F8MHZ SCODE (20000002), id 0000000100000007.
xc2028 16-0060: Found firmware for type=SCODE (20000000), id 0000000f00000007.
xc2028 16-0060: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
xc2028 16-0060: xc2028_get_reg 0004 called
xc2028 16-0060: xc2028_get_reg 0008 called
xc2028 16-0060: Device is Xceive 34584 version 8.7, firmware version 1.8
xc2028 16-0060: Incorrect readback of firmware version.
xc2028 16-0060: Retrying firmware load
xc2028 16-0060: checking firmware, user requested type=F8MHZ (2), id 00000000000000ff, scode_tbl (0), scode_nr 0
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Found firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Load init1 firmware, if exists
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=F8MHZ (2), id 00000000000000ff.
xc2028 16-0060: Selecting best matching firmware (3 bits) for type=(0), id 00000000000000ff:
xc2028 16-0060: Found firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Loading firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Trying to load scode 0
xc2028 16-0060: load_scode called
xc2028 16-0060: seek_firmware called, want type=F8MHZ SCODE (20000002), id 0000000100000007.
xc2028 16-0060: Found firmware for type=SCODE (20000000), id 0000000f00000007.
xc2028 16-0060: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
xc2028 16-0060: xc2028_get_reg 0004 called
xc2028 16-0060: xc2028_get_reg 0008 called
xc2028 16-0060: Device is Xceive 34584 version 8.7, firmware version 1.8
xc2028 16-0060: Incorrect readback of firmware version.
xc2028 16-0060: Retrying firmware load
xc2028 16-0060: checking firmware, user requested type=F8MHZ (2), id 00000000000000ff, scode_tbl (0), scode_nr 0
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Found firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Load init1 firmware, if exists
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=F8MHZ (2), id 00000000000000ff.
xc2028 16-0060: Selecting best matching firmware (3 bits) for type=(0), id 00000000000000ff:
xc2028 16-0060: Found firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Loading firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Trying to load scode 0
xc2028 16-0060: load_scode called
xc2028 16-0060: seek_firmware called, want type=F8MHZ SCODE (20000002), id 0000000100000007.
xc2028 16-0060: Found firmware for type=SCODE (20000000), id 0000000f00000007.
xc2028 16-0060: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
xc2028 16-0060: xc2028_get_reg 0004 called
xc2028 16-0060: xc2028_get_reg 0008 called
xc2028 16-0060: Device is Xceive 34584 version 8.7, firmware version 1.8
xc2028 16-0060: Incorrect readback of firmware version.
xc2028 16-0060: Retrying firmware load
xc2028 16-0060: checking firmware, user requested type=F8MHZ (2), id 00000000000000ff, scode_tbl (0), scode_nr 0
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Found firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 16-0060: Load init1 firmware, if exists
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 F8MHZ (4003), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: Can't find firmware for type=BASE INIT1 (4001), id 0000000000000000.
xc2028 16-0060: load_firmware called
xc2028 16-0060: seek_firmware called, want type=F8MHZ (2), id 00000000000000ff.
xc2028 16-0060: Selecting best matching firmware (3 bits) for type=(0), id 00000000000000ff:
xc2028 16-0060: Found firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Loading firmware for type=(0), id 0000000100000007.
xc2028 16-0060: Trying to load scode 0
xc2028 16-0060: load_scode called
xc2028 16-0060: seek_firmware called, want type=F8MHZ SCODE (20000002), id 0000000100000007.
xc2028 16-0060: Found firmware for type=SCODE (20000000), id 0000000f00000007.
xc2028 16-0060: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
xc2028 16-0060: xc2028_get_reg 0004 called
xc2028 16-0060: xc2028_get_reg 0008 called
xc2028 16-0060: Device is Xceive 34584 version 8.7, firmware version 1.8
xc2028 16-0060: Incorrect readback of firmware version.
xc2028 16-0060: divisor= 00 00 8d d0 (freq=567.250)
xc2028 16-0060: xc2028_set_analog_freq called
xc2028 16-0060: generic_set_freq called
xc2028 16-0060: should set frequency 567250 kHz
xc2028 16-0060: check_firmware called
xc2028 16-0060: xc2028_get_frequency called
xc2028 16-0060: xc2028_set_analog_freq called
xc2028 16-0060: generic_set_freq called
xc2028 16-0060: should set frequency 567250 kHz
xc2028 16-0060: check_firmware called

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: Terratec Cinergy T XS Firmware (Kernel 3.14.1)
  2014-04-24 19:09       ` Daniel Exner
@ 2014-04-24 19:24         ` Devin Heitmueller
  2014-04-24 21:26           ` Mauro Carvalho Chehab
  0 siblings, 1 reply; 8+ messages in thread
From: Devin Heitmueller @ 2014-04-24 19:24 UTC (permalink / raw)
  To: Daniel Exner; +Cc: Linux Media Mailing List

> Yes, I am sure. The tuner-xc2028 module even reports FW Version 2.7.

Yeah, the firmware image itself looks fine.

> What I suspect is, that this piece of hardware simply doesn't work with
> that firmware version.

You've got the right blob (that's the only firmware that has ever run
on the xc3028a chip).  The message you provided which says "Device is
Xceive 34584 version 8.7, firmware version 1.8" is the value read out
of the xc3028 chip after the firmware is loaded.  The value isn't read
out of the firmware blob.

There are really three possibilities here:

1.  The xc3028 is being held in reset.  They've screwed up the GPIOs
in the em28xx driver so many times that I've lost count.  If the chip
is in reset during the firmware load or when reading the version info,
you'll get whatever garbage happened to be in memory when the I2C call
was made.  Alternatively, the xc3028 gets it's reset line probed
between loading the firmware and reading the version (but this is less
likely).

2.  The xc3028 is not in reset, and the firmware load failed.  In this
case, for whatever reason the firmware wasn't loaded properly into the
chip (for example, due to a bug in the I2C code in the em28xx driver)
and the CPU on the 3028 never gets started.  Hence when it goes to
subsequently read the firmware version back out of the chip, the CPU
on the 3028 isn't running so you're getting a garbage value back from
the 3028.

3. The firmware loaded properly, but due to some other condition the
I2C call to read the firmware version never actually made it to the
3028 and you're getting back whatever garbage value happened to be in
the kernel memory that was supposed to be populated with the I2C
response.

The right way to debug this is probably to put a logic analyzer on the
I2C bus and see if the traffic is making it to the xc3028 at all.
Would also monitor the reset line with a scope and make sure it's high
and watch for it being strobed when it shouldn't be.  Of course both
of those debugging techniques require hardware.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: Terratec Cinergy T XS Firmware (Kernel 3.14.1)
  2014-04-24 19:24         ` Devin Heitmueller
@ 2014-04-24 21:26           ` Mauro Carvalho Chehab
  2014-04-25 19:40             ` Daniel Exner
  0 siblings, 1 reply; 8+ messages in thread
From: Mauro Carvalho Chehab @ 2014-04-24 21:26 UTC (permalink / raw)
  To: Daniel Exner; +Cc: Devin Heitmueller, Linux Media Mailing List

Em Thu, 24 Apr 2014 15:24:20 -0400
Devin Heitmueller <dheitmueller@kernellabs.com> escreveu:

> > Yes, I am sure. The tuner-xc2028 module even reports FW Version 2.7.
> 
> Yeah, the firmware image itself looks fine.
> 
> > What I suspect is, that this piece of hardware simply doesn't work with
> > that firmware version.
> 
> You've got the right blob (that's the only firmware that has ever run
> on the xc3028a chip).  The message you provided which says "Device is
> Xceive 34584 version 8.7, firmware version 1.8" is the value read out
> of the xc3028 chip after the firmware is loaded.  The value isn't read
> out of the firmware blob.
> 
> There are really three possibilities here:
> 
> 1.  The xc3028 is being held in reset.  They've screwed up the GPIOs
> in the em28xx driver so many times that I've lost count.  If the chip
> is in reset during the firmware load or when reading the version info,
> you'll get whatever garbage happened to be in memory when the I2C call
> was made.  Alternatively, the xc3028 gets it's reset line probed
> between loading the firmware and reading the version (but this is less
> likely).

Hmm... This device entry is too simple for my taste:
	[EM2870_BOARD_TERRATEC_XS] = {
		.name         = "Terratec Cinergy T XS",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_XC2028,
		.tuner_gpio   = default_tuner_gpio,
	},

And we never had a feedback that this works, as it still have a
	.valid        = EM28XX_BOARD_NOT_VALIDATED,
entry on it.

Maybe default_tuner_gpio is not the right one here, or it needs
something like:

		.i2c_speed      = EM28XX_I2C_CLK_WAIT_ENABLE |
				  EM28XX_I2C_FREQ_100_KHZ,

for it to work.

> 2.  The xc3028 is not in reset, and the firmware load failed.  In this
> case, for whatever reason the firmware wasn't loaded properly into the
> chip (for example, due to a bug in the I2C code in the em28xx driver)
> and the CPU on the 3028 never gets started.  Hence when it goes to
> subsequently read the firmware version back out of the chip, the CPU
> on the 3028 isn't running so you're getting a garbage value back from
> the 3028.

The most likely cause for this would be if the I2C speed is too high.

Not sure if this could also be affected by .xclk configuration.

> 3. The firmware loaded properly, but due to some other condition the
> I2C call to read the firmware version never actually made it to the
> 3028 and you're getting back whatever garbage value happened to be in
> the kernel memory that was supposed to be populated with the I2C
> response.
> 
> The right way to debug this is probably to put a logic analyzer on the
> I2C bus and see if the traffic is making it to the xc3028 at all.
> Would also monitor the reset line with a scope and make sure it's high
> and watch for it being strobed when it shouldn't be.  Of course both
> of those debugging techniques require hardware.

You likely don't need a hardware I2C analyzer, if the device is
not broken.

What can do, instead, is to sniff the traffic at the USB port, and get
the proper GPIO, XCLK and I2C speed settings for this device.

My suggestion is to either run it on a QEMU VM machine, redirecting
the USB device to the VM and sniffing the traffic on Linux, or to
use some USB snoop software.

Take a look at: http://linuxtv.org/wiki/index.php/Bus_snooping/sniffing

We have a script that parses em28xx traffic, converting them into
register writes. All you need to do is to sniff the traffic and check
what GPIO registers are needed to reset the device.

Then, add the corresponding data at em28xx-cards.c.

Regard
-- 

Regards,
Mauro

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: Terratec Cinergy T XS Firmware (Kernel 3.14.1)
  2014-04-24 21:26           ` Mauro Carvalho Chehab
@ 2014-04-25 19:40             ` Daniel Exner
  0 siblings, 0 replies; 8+ messages in thread
From: Daniel Exner @ 2014-04-25 19:40 UTC (permalink / raw)
  To: Linux Media Mailing List; +Cc: dex

[-- Attachment #1: Type: text/plain, Size: 1260 bytes --]

Hi,

Am 24.04.2014 23:26, schrieb Mauro Carvalho Chehab:
> Em Thu, 24 Apr 2014 15:24:20 -0400
> Devin Heitmueller <dheitmueller@kernellabs.com> escreveu:
[...]

> What can do, instead, is to sniff the traffic at the USB port, and get
> the proper GPIO, XCLK and I2C speed settings for this device.
> 
> My suggestion is to either run it on a QEMU VM machine, redirecting
> the USB device to the VM and sniffing the traffic on Linux, or to
> use some USB snoop software.
> 
> Take a look at: http://linuxtv.org/wiki/index.php/Bus_snooping/sniffing
> 
> We have a script that parses em28xx traffic, converting them into
> register writes. All you need to do is to sniff the traffic and check
> what GPIO registers are needed to reset the device.
> 
> Then, add the corresponding data at em28xx-cards.c.


Ok, I managed to setup a VBox with "TheOtherOS" and usbmon and sniffed
some traffic when I (virtually) plugged in the device.

The file is (compressed) about ~620 KiB.

I am honest: I have no clue what I sniffed or how I should read GPIO
registers from there.

If anyone is interested in helping me I would send the file directly.

Greetings
Daniel
-- 
Daniel Exner
Public-Key: https://www.dragonslave.de/pub_key.asc


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2014-04-25 19:40 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-23 20:34 Terratec Cinergy T XS Firmware (Kernel 3.14.1) Daniel Exner
2014-04-23 20:42 ` Devin Heitmueller
2014-04-23 20:50   ` Daniel Exner
2014-04-24 11:29     ` Mauro Carvalho Chehab
2014-04-24 19:09       ` Daniel Exner
2014-04-24 19:24         ` Devin Heitmueller
2014-04-24 21:26           ` Mauro Carvalho Chehab
2014-04-25 19:40             ` Daniel Exner

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox